In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-...In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-ating high-temperature carbonization and alkyl polyglucosides(APG)and rhamnolipid(RL)surfactants modifi-cation.The characterization results showed MSAR600℃ possessed a louts-leaf-like papillae microstructure with high contact angle(137.5°),abundant porous structure with high specific surface area(23.4 m^(2)/g),and various oxygen-containing functional groups(-OH,C=O,C-O).Batch adsorption experiments were conducted to inves-tigate the effect of adsorption time,temperature,pH,and absorbent dose on kitchen oil adsorption performance.Then the practical application for the removal of kitchen oil using MSAR600℃ was also performed.The results showed that MSAR600℃ had a higher removal efficiency for kitchen oil(75.98%),compared with the commercial detergent(72.3%).This study demonstrates an example of fabricating a green tableware detergent for enhanced removal performance of kitchen oil.展开更多
The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the ...The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the oil accumulation. According to oil geochemical analysis and oil-source correlation, the oil in deep and shallow reservoirs of the Lukeqin Oilfield presents different physical and saturated hydrocarbon mass spectrum characteristics. The Triassic heavy oil is from the northern Upper Permian lacustrine source rocks, and the light oil represented by the Yudong-9 Well is from the northwestern Lower Jurassic coal-measure source rocks. The timing of oil charging was determined by K/Ar isotope dating, reservoir fluid inclusion analysis and the evolution history of different source rocks. In summary, the accumulation process consists of two stages. From the end of Triassic to early Jurassic, the northern Permian source kitchen generated a considerable amount of oil, which was finally degraded to heavy oil, migrated to the south and then accumulated. The northwestern Jurassic coal-measure source kitchen began to generate oil at the end of Cretaceous, while the northern source kitchen could only generate a little hydrocarbon. The heavy oil and the light oil have different source rock locations, migration directions and accumulation times. The migration of hydrocarbon source kitchens affects the distribution of heavy oil and light oil reservoirs at the present time.展开更多
In the hinterland of the Junggar Basin, there are multiple depressions with multiple sets of source rocks. Therefore, the conditions of hydrocarbon sources are complex, and the geochemical characteristics and sources ...In the hinterland of the Junggar Basin, there are multiple depressions with multiple sets of source rocks. Therefore, the conditions of hydrocarbon sources are complex, and the geochemical characteristics and sources of hydrocarbon vary in different structural belts. The evolution of the Che- Mo palaeohigh affected the formation of hydrocarbon source kitchens and hydrocarbon migration. We studied the combination and superimposition of hydrocarbon source kitchens, using as an example the hinterland of the Junggar Basin （including the Yongjin, Zhengshacun, Moxizhuang and Luliang uplift areas）. The study was based on geochemical analyses of crude oil and fluid inclusions, and the histories of tectonic evolution and hydrocarbon generation. The results indicated that before the Paleogene there were two hydrocarbon-generating depressions： the Western Well Penl depression and the Changji depression on the south and north sides of the Che-Mo palaeohigh, respectively. The Permian source kitchen had been generating hydrocarbon continuously since Triassic and reached high maturity stage in the Cretaceous period. After Paleogene, the adjustment of the Che-Mo palaeohigh led to the subsidence of the Changji depression and the Jurassic source rocks reached mature stage and became the main source kitchens. However, the Jurassic source rocks in the Western Well Penl depression were still in a low maturity stage and did not generate oil because of the adjustment of tectonic movements. As a result, in the central and southern parts of the Junggar Basin, Jurassic source rocks generated oil, but in the Luliang uplift, the crude oil was from the Permian source rocks in the Western Well Penl depression and the Jurassic source rocks did not contribute. The crude oil in the central Zhengshacun-Moxizhuang belt was from the Permian source rocks in two depressions, and partially from the Jurassic source rocks. The crude oil in the Luliang uplift was from the source rocks of the lower Permian Fengcheng Formation and middle Permian Wuerhe Formation, which is characterized by superimposition of two sets of source kitchens and three accumulation stages. The crude oil in the Yongjin tectonic belt was from the lower Permian, middle Permian and Jurassic source rocks, which is characterized by superimposition of three sets of source kitchens and two accumulation stages. The crude oil in the Zhengshacun tectonic belt was from a combination of source kitchens of lower Permian and middle Permian in the Western Well Penl depression in the early stage and from the superimposition of Jurassic source rocks in the Changji depression in the late stage.展开更多
基金This study was supported by the Fundamental Research Funds for Zhejiang Provincial Universities and Research Institutes(No.2021J004)the Scientific Research Fund of Zhejiang Provincial Education Department(No.Y202044721).
文摘In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-ating high-temperature carbonization and alkyl polyglucosides(APG)and rhamnolipid(RL)surfactants modifi-cation.The characterization results showed MSAR600℃ possessed a louts-leaf-like papillae microstructure with high contact angle(137.5°),abundant porous structure with high specific surface area(23.4 m^(2)/g),and various oxygen-containing functional groups(-OH,C=O,C-O).Batch adsorption experiments were conducted to inves-tigate the effect of adsorption time,temperature,pH,and absorbent dose on kitchen oil adsorption performance.Then the practical application for the removal of kitchen oil using MSAR600℃ was also performed.The results showed that MSAR600℃ had a higher removal efficiency for kitchen oil(75.98%),compared with the commercial detergent(72.3%).This study demonstrates an example of fabricating a green tableware detergent for enhanced removal performance of kitchen oil.
基金supported by the Basic Research Development Program of China "Accumulation mechanisms and distribution patterns of hydrocarbon intypical superimposed basins of west China" (973 Program,No.2006CB202303)
文摘The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the oil accumulation. According to oil geochemical analysis and oil-source correlation, the oil in deep and shallow reservoirs of the Lukeqin Oilfield presents different physical and saturated hydrocarbon mass spectrum characteristics. The Triassic heavy oil is from the northern Upper Permian lacustrine source rocks, and the light oil represented by the Yudong-9 Well is from the northwestern Lower Jurassic coal-measure source rocks. The timing of oil charging was determined by K/Ar isotope dating, reservoir fluid inclusion analysis and the evolution history of different source rocks. In summary, the accumulation process consists of two stages. From the end of Triassic to early Jurassic, the northern Permian source kitchen generated a considerable amount of oil, which was finally degraded to heavy oil, migrated to the south and then accumulated. The northwestern Jurassic coal-measure source kitchen began to generate oil at the end of Cretaceous, while the northern source kitchen could only generate a little hydrocarbon. The heavy oil and the light oil have different source rock locations, migration directions and accumulation times. The migration of hydrocarbon source kitchens affects the distribution of heavy oil and light oil reservoirs at the present time.
基金supported by the National Basic Research Program in China (2006CB202300)
文摘In the hinterland of the Junggar Basin, there are multiple depressions with multiple sets of source rocks. Therefore, the conditions of hydrocarbon sources are complex, and the geochemical characteristics and sources of hydrocarbon vary in different structural belts. The evolution of the Che- Mo palaeohigh affected the formation of hydrocarbon source kitchens and hydrocarbon migration. We studied the combination and superimposition of hydrocarbon source kitchens, using as an example the hinterland of the Junggar Basin （including the Yongjin, Zhengshacun, Moxizhuang and Luliang uplift areas）. The study was based on geochemical analyses of crude oil and fluid inclusions, and the histories of tectonic evolution and hydrocarbon generation. The results indicated that before the Paleogene there were two hydrocarbon-generating depressions： the Western Well Penl depression and the Changji depression on the south and north sides of the Che-Mo palaeohigh, respectively. The Permian source kitchen had been generating hydrocarbon continuously since Triassic and reached high maturity stage in the Cretaceous period. After Paleogene, the adjustment of the Che-Mo palaeohigh led to the subsidence of the Changji depression and the Jurassic source rocks reached mature stage and became the main source kitchens. However, the Jurassic source rocks in the Western Well Penl depression were still in a low maturity stage and did not generate oil because of the adjustment of tectonic movements. As a result, in the central and southern parts of the Junggar Basin, Jurassic source rocks generated oil, but in the Luliang uplift, the crude oil was from the Permian source rocks in the Western Well Penl depression and the Jurassic source rocks did not contribute. The crude oil in the central Zhengshacun-Moxizhuang belt was from the Permian source rocks in two depressions, and partially from the Jurassic source rocks. The crude oil in the Luliang uplift was from the source rocks of the lower Permian Fengcheng Formation and middle Permian Wuerhe Formation, which is characterized by superimposition of two sets of source kitchens and three accumulation stages. The crude oil in the Yongjin tectonic belt was from the lower Permian, middle Permian and Jurassic source rocks, which is characterized by superimposition of three sets of source kitchens and two accumulation stages. The crude oil in the Zhengshacun tectonic belt was from a combination of source kitchens of lower Permian and middle Permian in the Western Well Penl depression in the early stage and from the superimposition of Jurassic source rocks in the Changji depression in the late stage.
