Dual pn junctions in lateral and vertical directions are formed by diffusing the p^＋ on the patterned n-well in standard CMOS technology, which are inserted under the inductor in order to reduce the currents in the s...Dual pn junctions in lateral and vertical directions are formed by diffusing the p^＋ on the patterned n-well in standard CMOS technology, which are inserted under the inductor in order to reduce the currents in the substrate induced by the electromagnetic field from the inductor. The thickness of high resistance is not equivalent to the width of the depletion region of the vertical pn junctions,but the depth of the bottom pn junction in the substrate are both proposed and validated. For the first time, through the grounded p^＋-diffusion layer shielding the suhstrate from the electric field of the inductor, the width of the depletion regions of the lateral and vertical pn junctions are changed by increasing the voltage applied to the n wells. The quality factor is improved or reduced with the thickness of high resistance by 19%. This phenomenon validates the theory that the pn junction substrate isolation can reduce the loss caused by the currents in the substrate induced by the electromagnetic field from the inductor.展开更多
This paper presents a technique for low noise figure reduction of low-noise amplifier (LNA). The proposed LNA is designed in a source degeneration technique that offers lower noise figure. The resistance of the on-chi...This paper presents a technique for low noise figure reduction of low-noise amplifier (LNA). The proposed LNA is designed in a source degeneration technique that offers lower noise figure. The resistance of the on-chip inductor is reduced by using multilayer that significantly reduces the thermal noise due to spiral inductor. Also, using spiral inductor as a gate inductor reduces the effect of the input parasitic capacitance on the noise figure and provides a good matching at the input and output of the LNA. The results of the LNA using multilayer on-chip inductor compared will off-chip inductor have been illustrated. It shows that the proposed technique reduces significantly the noise figure and improves the matching. The proposed LNA is designed in 0.13 μm process with 1.3 V supply voltage and simulated using Advanced Design System (ADS) software. The simulation results show that the LNA is unconditionally stable and provides a forward gain of 11.087 dB at operating frequency of 15 GHz with 1.784 dB noise figure and input and output impedance matching of –17.93 dB, and –10.04 dB.展开更多
Analyzing the influence on Q factor, which was caused by the parasitic effect in a CMOS RF on chip integrated inductor, a concise method to increase the Q factor has been obtained when optimizing the layout parameter....Analyzing the influence on Q factor, which was caused by the parasitic effect in a CMOS RF on chip integrated inductor, a concise method to increase the Q factor has been obtained when optimizing the layout parameter. Using this method, the Q factor of 7.9 can be achieved in a 5nH inductor (operating frequency is 2GHz) while the errors in inductance are less than 0.5% compared with the aimed values. It is proved by experiments that this method can guarantee the sufficient accuracy but require less computation time. Therefore, it is of great use for the design of the inductor in CMOS RF IC’s.展开更多
Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity ...Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.展开更多
Integrated photonic devices are essential for on-chip optical communication,optical-electronic systems,and quantum information sciences.To develop a high-fidelity interface between photonics in various frequency domai...Integrated photonic devices are essential for on-chip optical communication,optical-electronic systems,and quantum information sciences.To develop a high-fidelity interface between photonics in various frequency domains without disturbing their quantum properties,nonlinear frequency conversion,typically steered with the quadratic(χ2)process,should be considered.Furthermore,another degree of freedom in steering the spatial modes during theχ2 process,with unprecedent mode intensity is proposed here by modulating the lithium niobate(LN)waveguide-based inter-mode quasi-phasematching conditions with both temperature and wavelength parameters.Under high incident light intensities(25 and 27.8 dBm for the pump and the signal lights,respectively),mode conversion at the sum-frequency wavelength with sufficient high output power(−7–8 dBm)among the TM01,TM10,and TM00 modes is realized automatically with characterized broad temperature(ΔT≥8°C)and wavelength windows(Δλ≥1 nm),avoiding the previous efforts in carefully preparing the signal or pump modes.The results prove that high-intensity spatial modes can be prepared at arbitrary transparent wavelength of theχ2 media toward on-chip integration,which facilitates the development of chip-based communication and quantum information systems because spatial correlations can be applied to generate hyperentangled states and provide additional robustness in quantum error correction with the extended Hilbert space.展开更多
A new structure of the on- chip integrated inductors im plem ented in conventional Si process is presented as a lateral solenoid.The fabrication process utilizes a conventional Si technology with standard double- lay...A new structure of the on- chip integrated inductors im plem ented in conventional Si process is presented as a lateral solenoid.The fabrication process utilizes a conventional Si technology with standard double- layer m etal- lization.S param eters of the inductors based equivalent circuit are investigated and the inductor parameters are cal- culated from the m easured data.Experimental results are presented on an integrated inductors fabricated in a lateral solenoid type utilizing double m etal layers rather than a single metal layer as used in conventional planar spiral de- vices.Inductors with peak Q of 1.3and inductance value of 2 .2 n H are presented,which are com parable to conven- tional planar spiral inductors.展开更多
An improved single-π equivalent circuit model for on-chip inductors in the GaAs process is presented in this paper. Considering high order parasites, the model is established by comprising an improved skin effect bra...An improved single-π equivalent circuit model for on-chip inductors in the GaAs process is presented in this paper. Considering high order parasites, the model is established by comprising an improved skin effect branch and a substrate lateral coupling branch. The parameter extraction is based on an improved characteristic function approach and vector fitting method. The model has better simulation than the previous work over the measured data of 2.5r and 4.5r on-chip inductors in the GaAs process.展开更多
为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来...为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来吸收漏感能量,对寄生电容与漏感谐振引起的电压尖峰起到约束作用,降低了开关管的电压应力。描述了变换器电感电流连续模式(Continuous current mode,CCM)下的运行特点,并进行了该变换器的参数设计。最后,通过搭建一台100 W的试验样机来求证理论的正确性。展开更多
文摘Dual pn junctions in lateral and vertical directions are formed by diffusing the p^＋ on the patterned n-well in standard CMOS technology, which are inserted under the inductor in order to reduce the currents in the substrate induced by the electromagnetic field from the inductor. The thickness of high resistance is not equivalent to the width of the depletion region of the vertical pn junctions,but the depth of the bottom pn junction in the substrate are both proposed and validated. For the first time, through the grounded p^＋-diffusion layer shielding the suhstrate from the electric field of the inductor, the width of the depletion regions of the lateral and vertical pn junctions are changed by increasing the voltage applied to the n wells. The quality factor is improved or reduced with the thickness of high resistance by 19%. This phenomenon validates the theory that the pn junction substrate isolation can reduce the loss caused by the currents in the substrate induced by the electromagnetic field from the inductor.
文摘This paper presents a technique for low noise figure reduction of low-noise amplifier (LNA). The proposed LNA is designed in a source degeneration technique that offers lower noise figure. The resistance of the on-chip inductor is reduced by using multilayer that significantly reduces the thermal noise due to spiral inductor. Also, using spiral inductor as a gate inductor reduces the effect of the input parasitic capacitance on the noise figure and provides a good matching at the input and output of the LNA. The results of the LNA using multilayer on-chip inductor compared will off-chip inductor have been illustrated. It shows that the proposed technique reduces significantly the noise figure and improves the matching. The proposed LNA is designed in 0.13 μm process with 1.3 V supply voltage and simulated using Advanced Design System (ADS) software. The simulation results show that the LNA is unconditionally stable and provides a forward gain of 11.087 dB at operating frequency of 15 GHz with 1.784 dB noise figure and input and output impedance matching of –17.93 dB, and –10.04 dB.
文摘Analyzing the influence on Q factor, which was caused by the parasitic effect in a CMOS RF on chip integrated inductor, a concise method to increase the Q factor has been obtained when optimizing the layout parameter. Using this method, the Q factor of 7.9 can be achieved in a 5nH inductor (operating frequency is 2GHz) while the errors in inductance are less than 0.5% compared with the aimed values. It is proved by experiments that this method can guarantee the sufficient accuracy but require less computation time. Therefore, it is of great use for the design of the inductor in CMOS RF IC’s.
基金The authors thank D.Berger,D.Hofmann and C.Kupka in IFW Dresden for helpful technical support.H.R.acknowledges funding from the DFG(Deutsche Forschungsgemeinschaft)within grant number RE3973/1-1.Q.J.,H.R.and K.N.conceived the work.With the support from N.Y.and X.J.,Q.J.and T.G.fabricated the thermoelectric films and conducted the structural and compositional characterizations.Q.J.prepared microchips and fabricated the on-chip micro temperature controllers.Q.J.and N.P.carried out the temperature-dependent material and device performance measurements.Q.J.and H.R.performed the simulation and analytical calculations.Q.J.,H.R.and K.N.wrote the manuscript with input from the other coauthors.All the authors discussed the results and commented on the manuscript.
文摘Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.
基金financial supports from National Key Research and Development Program of China(2021YFB3602500)Self-deployment Project of Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(2021ZZ101)National Natural Science Foundation of China(Grant Nos.62275247 and 61905246).
文摘Integrated photonic devices are essential for on-chip optical communication,optical-electronic systems,and quantum information sciences.To develop a high-fidelity interface between photonics in various frequency domains without disturbing their quantum properties,nonlinear frequency conversion,typically steered with the quadratic(χ2)process,should be considered.Furthermore,another degree of freedom in steering the spatial modes during theχ2 process,with unprecedent mode intensity is proposed here by modulating the lithium niobate(LN)waveguide-based inter-mode quasi-phasematching conditions with both temperature and wavelength parameters.Under high incident light intensities(25 and 27.8 dBm for the pump and the signal lights,respectively),mode conversion at the sum-frequency wavelength with sufficient high output power(−7–8 dBm)among the TM01,TM10,and TM00 modes is realized automatically with characterized broad temperature(ΔT≥8°C)and wavelength windows(Δλ≥1 nm),avoiding the previous efforts in carefully preparing the signal or pump modes.The results prove that high-intensity spatial modes can be prepared at arbitrary transparent wavelength of theχ2 media toward on-chip integration,which facilitates the development of chip-based communication and quantum information systems because spatial correlations can be applied to generate hyperentangled states and provide additional robustness in quantum error correction with the extended Hilbert space.
文摘A new structure of the on- chip integrated inductors im plem ented in conventional Si process is presented as a lateral solenoid.The fabrication process utilizes a conventional Si technology with standard double- layer m etal- lization.S param eters of the inductors based equivalent circuit are investigated and the inductor parameters are cal- culated from the m easured data.Experimental results are presented on an integrated inductors fabricated in a lateral solenoid type utilizing double m etal layers rather than a single metal layer as used in conventional planar spiral de- vices.Inductors with peak Q of 1.3and inductance value of 2 .2 n H are presented,which are com parable to conven- tional planar spiral inductors.
基金Project supported by the National Natural Science Foundation of China(No.61674036)
文摘An improved single-π equivalent circuit model for on-chip inductors in the GaAs process is presented in this paper. Considering high order parasites, the model is established by comprising an improved skin effect branch and a substrate lateral coupling branch. The parameter extraction is based on an improved characteristic function approach and vector fitting method. The model has better simulation than the previous work over the measured data of 2.5r and 4.5r on-chip inductors in the GaAs process.
文摘为了解决传统变换器电压增益低的问题,将Boost变换器与Cuk变换器进行并联集成,并利用耦合电感倍压技术提高变换器的电压增益。设计而成的高增益耦合电感组合Boost-Cuk变换器保留了Cuk变换器输出电流的连续性,新型结构中使用无源钳位来吸收漏感能量,对寄生电容与漏感谐振引起的电压尖峰起到约束作用,降低了开关管的电压应力。描述了变换器电感电流连续模式(Continuous current mode,CCM)下的运行特点,并进行了该变换器的参数设计。最后,通过搭建一台100 W的试验样机来求证理论的正确性。
