Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of...Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.展开更多
The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has b...The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has been determined under the sucking action of the oil well pump.Such analysis has been conducted for a real drilling well,taking into account the process of lifting,lowering,unblocking and water plugging.Comparison between field measured data and simulation data indicates that the model is reliable and accurate.The packer creep effect under different pressure differences has also been investigated in the framework of the same model.展开更多
A knowledge of soil permeability is essential to evaluate hydrologic characteristics of soil, such as water storage and water movement, and soil permeability coefficient is an important parameter that reflects soil pe...A knowledge of soil permeability is essential to evaluate hydrologic characteristics of soil, such as water storage and water movement, and soil permeability coefficient is an important parameter that reflects soil permeability. In order to confirm the acceptability of the one-dimensional horizontal infiltration method(one-D method) for simultaneously determining both the saturated and unsaturated permeability coefficients of loamy sand, we first measured the cumulative infiltration and the wetting front distance under various infiltration heads through a series of one-dimensional horizontal infiltration experiments, and then analyzed the relationships of the cumulative horizontal infiltration with the wetting front distance and the square root of infiltration time. We finally compared the permeability results from Gardner model based on the one-D method with the results from other two commonly-used methods(i.e., constant head method and van Genuchten model) to evaluate the acceptability and applicability of the one-D method. The results showed that there was a robust linear relationship between the cumulative horizontal infiltration and the wetting front distance, suggesting that it is more appropriate to take the soil moisture content after infiltration in the entire wetted zone as the average soil moisture content than as the saturated soil moisture content. The results also showed that there was a robust linear relationship between the cumulative horizontal infiltration and the square root of infiltration time, suggesting that the Philip infiltration formula can better reflect the characteristics of cumulative horizontal infiltration under different infiltration heads. The following two facts indicate that it is feasible to use the one-D method for simultaneously determining the saturated and unsaturated permeability coefficients of loamy sand. First, the saturated permeability coefficient(prescribed in the Gardner model) of loamy sand obtained from the one-D method well agreed with the value obtained from the constant head method. Second, the relationship of unsaturated permeability coefficient with soil water suction for loamy sand calculated using Gardner model based on the one-D method was nearly identical with the same relationship calculated using van Genuchten model.展开更多
Force analysis and calculation of workover string in the slanted and horizontal well are the basis of designing and checking string strength, selecting tools and determining operation parameters, which determine the o...Force analysis and calculation of workover string in the slanted and horizontal well are the basis of designing and checking string strength, selecting tools and determining operation parameters, which determine the operation safety and success of engineering accidence treatment. In this paper, by comprehensive consideration of wellbore structure, string assembly, string load and workover operation conditions, the workover string mechanical model has been built under three kinds of working states of lifting, lowering and rotating. The downhole string mechanics has been analyzed and calculated. By field verification, the string assembly, tool selection and operation parameter optimization can be achieved, which can improve the safety and success rates of workover engineering accident treatment.展开更多
The eastern foothills of the Helan Mountains in China are a typical mountainous region of soil and gravel,where gravel could affect the water movement process in the soil.This study focused on the effects of different...The eastern foothills of the Helan Mountains in China are a typical mountainous region of soil and gravel,where gravel could affect the water movement process in the soil.This study focused on the effects of different gravel contents on the water absorption characteristics and hydraulic parameters of stony soil.The stony soil samples were collected from the eastern foothills of the Helan Mountains in April 2023 and used as the experimental materials to conduct a one-dimensional horizontal soil column absorption experiment.Six experimental groups with gravel contents of 0%,10%,20%,30%,40%,and 50%were established to determine the saturated hydraulic conductivity(K_(s)),saturated water content(θ_(s)),initial water content(θ_(i)),and retention water content(θ_(r)),and explore the changes in the wetting front depth and cumulative absorption volume during the absorption experiment.The Philip model was used to fit the soil absorption process and determine the soil water absorption rate.Then the length of the characteristic wetting front depth,shape coefficient,empirical parameter,inverse intake suction and soil water suction were derived from the van Genuchten model.Finally,the hydraulic parameters mentioned above were used to fit the soil water characteristic curves,unsaturated hydraulic conductivity(K_(θ))and specific water capacity(C(h)).The results showed that the wetting front depth and cumulative absorption volume of each treatment gradually decreased with increasing gravel content.Compared with control check treatment with gravel content of 0%,soil water absorption rates in the treatments with gravel contents of 10%,20%,30%,40%,and 50%decreased by 11.47%,17.97%,25.24%,29.83%,and 42.45%,respectively.As the gravel content increased,inverse intake suction gradually increased,and shape coefficient,K_(s),θ_(s),andθ_(r)gradually decreased.For the same soil water content,soil water suction and K_(θ)gradually decreased with increasing gravel content.At the same soil water suction,C(h)decreased with increasing gravel content,and the water use efficiency worsened.Overall,the water holding capacity,hydraulic conductivity,and water use efficiency of stony soil in the eastern foothills of the Helan Mountains decreased with increasing gravel content.This study could provide data support for improving soil water use efficiency in the eastern foothills of the Helan Mountains and other similar rocky mountainous areas.展开更多
To counter the strength problem of drill string in well of large curvature and small diameter, well axis was taken as datum mis. Based on description of deflection of well an's and on analysis of three dimensional...To counter the strength problem of drill string in well of large curvature and small diameter, well axis was taken as datum mis. Based on description of deflection of well an's and on analysis of three dimensional forces of a small section of drill string, equilibrium differential equations of large deflection drill string were established. The internal forces were found by Longe-Kutta method. The stresses were found by using them and the strength prerequisite was established. Stresses of drill string in lateral horizontal well H767 were computed. The results are in agreement with those of finite element model and soft-rope rigidified model. But the method is simpler for computation than finite element model and is more perfect than soft-rope rigidified model. Curvature of the well is too large and there is stress concentration so that the fraction accident of drill string occurs.展开更多
基金Supported by the Project of National Natural Science Foundation of China(52234002,42230814)。
文摘Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.
文摘The finite element method has been applied to simulate the dynamics of a water plugging string in a complex horizontal well of a low-permeability oilfield.The force associated with the pipe string and the packer has been determined under the sucking action of the oil well pump.Such analysis has been conducted for a real drilling well,taking into account the process of lifting,lowering,unblocking and water plugging.Comparison between field measured data and simulation data indicates that the model is reliable and accurate.The packer creep effect under different pressure differences has also been investigated in the framework of the same model.
基金funded by the National Basic Research Program of China (2013CB429902)the National Natural Science Foundation of China (U1303181, 41671032)
文摘A knowledge of soil permeability is essential to evaluate hydrologic characteristics of soil, such as water storage and water movement, and soil permeability coefficient is an important parameter that reflects soil permeability. In order to confirm the acceptability of the one-dimensional horizontal infiltration method(one-D method) for simultaneously determining both the saturated and unsaturated permeability coefficients of loamy sand, we first measured the cumulative infiltration and the wetting front distance under various infiltration heads through a series of one-dimensional horizontal infiltration experiments, and then analyzed the relationships of the cumulative horizontal infiltration with the wetting front distance and the square root of infiltration time. We finally compared the permeability results from Gardner model based on the one-D method with the results from other two commonly-used methods(i.e., constant head method and van Genuchten model) to evaluate the acceptability and applicability of the one-D method. The results showed that there was a robust linear relationship between the cumulative horizontal infiltration and the wetting front distance, suggesting that it is more appropriate to take the soil moisture content after infiltration in the entire wetted zone as the average soil moisture content than as the saturated soil moisture content. The results also showed that there was a robust linear relationship between the cumulative horizontal infiltration and the square root of infiltration time, suggesting that the Philip infiltration formula can better reflect the characteristics of cumulative horizontal infiltration under different infiltration heads. The following two facts indicate that it is feasible to use the one-D method for simultaneously determining the saturated and unsaturated permeability coefficients of loamy sand. First, the saturated permeability coefficient(prescribed in the Gardner model) of loamy sand obtained from the one-D method well agreed with the value obtained from the constant head method. Second, the relationship of unsaturated permeability coefficient with soil water suction for loamy sand calculated using Gardner model based on the one-D method was nearly identical with the same relationship calculated using van Genuchten model.
文摘Force analysis and calculation of workover string in the slanted and horizontal well are the basis of designing and checking string strength, selecting tools and determining operation parameters, which determine the operation safety and success of engineering accidence treatment. In this paper, by comprehensive consideration of wellbore structure, string assembly, string load and workover operation conditions, the workover string mechanical model has been built under three kinds of working states of lifting, lowering and rotating. The downhole string mechanics has been analyzed and calculated. By field verification, the string assembly, tool selection and operation parameter optimization can be achieved, which can improve the safety and success rates of workover engineering accident treatment.
基金funded by the National Natural Science Foundation of China(32360321)the Natural Science Foundation of Ningxia Hui Autonomous Region,China(2023AAC03046,2023AAC02018)the Ningxia Key Research and Development Project(2021BEG02011).
文摘The eastern foothills of the Helan Mountains in China are a typical mountainous region of soil and gravel,where gravel could affect the water movement process in the soil.This study focused on the effects of different gravel contents on the water absorption characteristics and hydraulic parameters of stony soil.The stony soil samples were collected from the eastern foothills of the Helan Mountains in April 2023 and used as the experimental materials to conduct a one-dimensional horizontal soil column absorption experiment.Six experimental groups with gravel contents of 0%,10%,20%,30%,40%,and 50%were established to determine the saturated hydraulic conductivity(K_(s)),saturated water content(θ_(s)),initial water content(θ_(i)),and retention water content(θ_(r)),and explore the changes in the wetting front depth and cumulative absorption volume during the absorption experiment.The Philip model was used to fit the soil absorption process and determine the soil water absorption rate.Then the length of the characteristic wetting front depth,shape coefficient,empirical parameter,inverse intake suction and soil water suction were derived from the van Genuchten model.Finally,the hydraulic parameters mentioned above were used to fit the soil water characteristic curves,unsaturated hydraulic conductivity(K_(θ))and specific water capacity(C(h)).The results showed that the wetting front depth and cumulative absorption volume of each treatment gradually decreased with increasing gravel content.Compared with control check treatment with gravel content of 0%,soil water absorption rates in the treatments with gravel contents of 10%,20%,30%,40%,and 50%decreased by 11.47%,17.97%,25.24%,29.83%,and 42.45%,respectively.As the gravel content increased,inverse intake suction gradually increased,and shape coefficient,K_(s),θ_(s),andθ_(r)gradually decreased.For the same soil water content,soil water suction and K_(θ)gradually decreased with increasing gravel content.At the same soil water suction,C(h)decreased with increasing gravel content,and the water use efficiency worsened.Overall,the water holding capacity,hydraulic conductivity,and water use efficiency of stony soil in the eastern foothills of the Helan Mountains decreased with increasing gravel content.This study could provide data support for improving soil water use efficiency in the eastern foothills of the Helan Mountains and other similar rocky mountainous areas.
文摘To counter the strength problem of drill string in well of large curvature and small diameter, well axis was taken as datum mis. Based on description of deflection of well an's and on analysis of three dimensional forces of a small section of drill string, equilibrium differential equations of large deflection drill string were established. The internal forces were found by Longe-Kutta method. The stresses were found by using them and the strength prerequisite was established. Stresses of drill string in lateral horizontal well H767 were computed. The results are in agreement with those of finite element model and soft-rope rigidified model. But the method is simpler for computation than finite element model and is more perfect than soft-rope rigidified model. Curvature of the well is too large and there is stress concentration so that the fraction accident of drill string occurs.