Order analysis is regarded as one of the most significant method for monitoring and analyzing rotational machinery for the phenomenon of " frequency smear".However,the order analysis based on resampling is a...Order analysis is regarded as one of the most significant method for monitoring and analyzing rotational machinery for the phenomenon of " frequency smear".However,the order analysis based on resampling is a signal processingwhich converts the constant time interval sampling into constant angle interval sampling,while with the variety of the rotational speed.The superiority of the order analysis is investigatedon implement of order analysis.Andthrough comparing the advantage and disadvantage between spectrum and order analysis,the paper will discuss the order analysis form a deep perspective.展开更多
This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental be...This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental benchmark with respect to the benchmark’s 180 microscopic total cross sections. This computation was made possible by applying the Third-Order Adjoint Sensitivity Analysis Methodology developed by Cacuci. The numerical results obtained in this work revealed that many of the 3<sup>rd</sup>-order sensitivities are significantly larger than their corresponding 1<sup>st</sup>- and 2<sup>nd</sup>-order ones, which is contrary to the widely held belief that higher-order sensitivities are all much smaller and hence less important than the first-order ones, for reactor physics systems. In particular, the largest 3<sup>rd</sup>-order relative sensitivity is the mixed sensitivity <img src="Edit_754b8437-dfdf-487d-af68-c78c637e6d4e.png" width="180" height="24" alt="" />of the PERP leakage response with respect to the lowest energy-group (30) total cross sections of <sup>1</sup>H (“isotope 6”) and <sup>239</sup>Pu (“isotope 1”). These two isotopes are shown in this work to be the two most important parameters affecting the PERP benchmark’s leakage response. By comparison, the largest 1<sup>st</sup>-order sensitivity is that of the PERP leakage response with respect to the lowest energy-group total cross section of isotope <sup>1</sup>H, having the value <img src="Edit_a5cfcc11-6a99-41ee-b844-a5ee84b454b3.png" width="100" height="24" alt="" />, while the largest 2<sup>nd</sup>-order sensitivity is <img src="Edit_05166a2b-97f7-43f1-98ff-b21368c00228.png" width="120" height="22" alt="" />. The 3<sup>rd</sup>-order sensitivity analysis presented in this work is the first ever such analysis in the field of reactor physics. The consequences of the results presented in this work on the uncertainty analysis of the PERP benchmark’s leakage response will be presented in a subsequent work.展开更多
With many features,the magnetorheological fluid( MRF) damper is widely applied in the semiactive vibration control system. And sensitivity analysis is an important method to study the influence weight of various param...With many features,the magnetorheological fluid( MRF) damper is widely applied in the semiactive vibration control system. And sensitivity analysis is an important method to study the influence weight of various parameters on damping force characteristics. A mathematical model of the output damping force on the MRF damper is established by the mechanism modeling method,a first order output sensitivity equation is deduced and the expression of the first order output sensitivity function is obtained. The first-order sensitivity functions of ten design parameters are solved,and the influence degree of system parameters change on the output force of MRF damper is analyzed by comparing the sensitivity index of the parameters. Two sensitivities of vibration velocity and control current are obtained through experiment to prove the other parameters sensitivity analysis conclusion by analogy verification,which provides guidance for the structure optimization design of MRF damper.展开更多
With the conditions of small data size and low Signal-to-Noise Ratio (SNR), the application of Higher Order Statistics (HOS) is restrained not only by its high estimation variance,but also by its low estimation precis...With the conditions of small data size and low Signal-to-Noise Ratio (SNR), the application of Higher Order Statistics (HOS) is restrained not only by its high estimation variance,but also by its low estimation precision. Therefore, a modified HOS based Time Delay Estimation (TDE) algorithm is proposed to overcome these problems. Comparing with the conventional TDE algorithms, the estimation variance is improved greatly. A typical simulation example is completed in order to test the performance of the algorithm proposed, which shows that the proposed algorithm has advantages over the traditional ones in both detection performance and computation efficiency.展开更多
Seventy-eight cases of retinoblastoma (Rb) diagnosed at the Eye ENT Hospital, Shanghai Medical University from 1953 to 1985 were studied. The results of multiple logistic regression analysis and conditional probabilit...Seventy-eight cases of retinoblastoma (Rb) diagnosed at the Eye ENT Hospital, Shanghai Medical University from 1953 to 1985 were studied. The results of multiple logistic regression analysis and conditional probability model showed that high fetal order had a moderate risk (OR=1.28, P<0.05) of developing unilateral Rb. Both unilateral and bilateral cases were independent of parental ages, and no interaction could be found between fetal order and paternal of maternal age; also, the effect of fetal order was not confounded by parental ages.展开更多
Airframe structural optimization at different design stages results in new mass and stiffness distributions which modify the critical design loads envelop. Determination of aircraft critical loads is an extensive anal...Airframe structural optimization at different design stages results in new mass and stiffness distributions which modify the critical design loads envelop. Determination of aircraft critical loads is an extensive analysis procedure which involves simulating the aircraft at thousands of load cases as defmed in the certification requirements. It is computationally prohibitive to use a GFEM （Global Finite Element Model） for the load analysis, hence reduced order structural models are required which closely represent the dynamic characteristics of the GFEM. This paper presents the implementation of CMS （Component Mode Synthesis） method for the generation of high fidelity ROM （Reduced Order Model） of complex airframes. Here, sub-structuring technique is used to divide the complex higher order airframe dynamical system into a set of subsystems. Each subsystem is reduced to fewer degrees of freedom using matrix projection onto a carefully chosen reduced order basis subspace. The reduced structural matrices are assembled for all the subsystems through interface coupling and the dynamic response of the total system is solved. The CMS method is employed to develop the ROM of a Bombardier Aerospace business jet which is coupled with aerodynamic model for dynamic aeroelasticity loads analysis under gust turbulence. Another set of dynamic aeroelastic loads is also generated employing a stick model of same aircraft. Stick model is the reduced order modelling methodology commonly used in the aerospace industry based on stiffness generation by unitary loading application. The extracted aeroelastic loads from both models are compared against those generated employing the GFEM. Critical loads modal participation factors and modal characteristics of the different ROMs are investigated and compared against those of the GFEM. Results obtained show that the ROM generated using Craig Bampton CMS reduction process has a superior dynamic characteristics compared to the stick model.展开更多
Order analysis for multi-Bennett linkages is a difficult topic in kinematics. Traditional methods fail to obtain the order of multi-Bennett linkages due to considering the special geometric distributions among joint a...Order analysis for multi-Bennett linkages is a difficult topic in kinematics. Traditional methods fail to obtain the order of multi-Bennett linkages due to considering the special geometric distributions among joint axes. An order principle for multi-Bennett linkages is presented. For a summated multi-Bennett linkage, three procedures are included in the order principle. Firstly, a homogeneous screw equation is obtained by taking linear superposition operations and then the maximum order is determined according to linear dependency of all screws. Secondly, two theorems are employed to determine the maximum order, where the first is used to judge the linear independency of four-system screws and the second is fit for identifying the linear independency of five-system screws. Lastly, all possible cases in the order range are considered until the valid order is screened out. For a syncopated multi-Bennett linkage, an equivalent summated model is built and then the order analysis is the same as that of summated linkages. In order to verify the effectiveness of the presented order principle, the orders of summated 5R and 6R linkages as well as a syncopated 6R linkage are analyzed. The computed orders of the former two summated linkages are both 4 and the computed order of the last syncopated 6R linkage is 5. The results coincide with the prototype data. The advantage of the proposed principle is that it can get the correct order of a multi-Bennett linkage without solving the geometric conditions of joint axes and has wide application in variety of multi-Bennett linkages.展开更多
A new kind of material cast polyurethane elastomers (CPUE) is introduced to take the place of rubber on load bearing wheel for the first time. Based on load bearing wheel dimensions, material properties and operatin...A new kind of material cast polyurethane elastomers (CPUE) is introduced to take the place of rubber on load bearing wheel for the first time. Based on load bearing wheel dimensions, material properties and operating conditions, the structure of wheel flange is optimized by zero order finite element method. A detailed three dimensional finite element model of flange of load bearing wheel is developed and utilized to optimize structure of wheel flange. Its service life, which is affected by flange structure parameter, is analyzed by comparing the optimization results with those of prototype of wheel. The results of optimization are presented and the stress field of load bearing wheel in optimal dimension obtained by using finite element analysis method is demonstrated. The finite element analysis and optimization results show that the CPUE load bearing wheel is feasible and suitable for the tracked vehicle and has a guiding value in practice of the weighting design of the whole tracked vehicle.展开更多
Through a higher-order boundary element method based on NURBS （Non-uniform Rational B-splines）, the calculation of second-order low-frequency forces and slow drift motions is conducted for floating bodies. In the fl...Through a higher-order boundary element method based on NURBS （Non-uniform Rational B-splines）, the calculation of second-order low-frequency forces and slow drift motions is conducted for floating bodies. In the floating body＇s inner domain, an auxiliary equation is obtained by applying a Green function which satisfies the solid surface condition. Then, the auxiliary equation and the velocity potential equation are combined in the fluid domain to remove the solid angle coefficient and the singularity of the double layer potentials in the integral equation. Thus, a new velocity potential integral equation is obtained. The new equation is extended to the inner domain to reheve the irregular frequency effects; on the basis of the order analysis, the comparison is made about the contribution of all integral terms with the result in the second-order tow-frequency problem; the higher-order boundary element method based on NURBS is apphed to calculate the geometric position and velocity potentials; the slow drift motions are calculated by the spectrum analysis method. Removing the solid angle coefficient can apply NURBS technology to the hydrodynamic calculation of floating bodies with complex surfaces, and the extended boundary integral method can reduce the irregular frequency effects. Order analysis shows that free surface integral can be neglected, and the numerical results can also prove the correctness of order analysis. The results of second-order low-frequency forces and slow drift motions and the comparison with the results from references show that the application of the NURBS technology to the second-order low-frequency problem is of high efficiency and credible results.展开更多
AIM：To investigate quantitative and qualitative optical outcomes of single-step transepithelial photorefractive keratectomy（Trans PRK）in high myopia.METHODS：In a prospective interventional case-series,30 eyes with...AIM：To investigate quantitative and qualitative optical outcomes of single-step transepithelial photorefractive keratectomy（Trans PRK）in high myopia.METHODS：In a prospective interventional case-series,30 eyes with high myopia（-6.00 to-8.75 D）with（up to-3.00 D）or without astigmatism were enrolled from Bina Eye Hospital,Tehran,Iran. One-step Trans PRK was performed with aberration-free aspherical optimized profile and SCHWIND AMARIS 500 laser. One-year follow-up results for refraction,visual acuities,vector analysis,ocular wavefront（OWF）and corneal wave-front（CWF）higher order aberrations（HOA）,contrast sensitivity（CS）,and postoperative haze were assessed.RESULTS：After the surgery,both photopic and mesopic CSs significantly improved（both P〈0.001）. We detected significant induction of OWF coma and trefoil（P〈0.001 for both）HOAs; CWF coma（P=0.002）,spherical（P〈0.001）,and tetrafoil（P=0.003）HOAs in 6 mm analysis diameter; and CWF trefoil（P=0.04）HOA in 4 mm analysis diameter. The range of mean induction observed for various HOAs was0.005-0.11 μm. The 86.7% of eyes reached an uncorrected distance visual acuity of 20/20 or better; 96.7% of eyes were within ±0.5 D of targeted spherical refraction. In vector analysis,mean correction index value was 1.03 and mean index of success was 0.22. By 12mo after the operation,no eye lost any number of corrected distancevisual acuity lines. We detected no corneal haze greater than 1~＋ throughout the follow-up.CONCLUSION：Our findings show promising effects of single-step Trans PRK on quality of vision in high myopic eyes. It also improves refraction and visual acuity.展开更多
A simple modal analysis （MA） method to explain the diffraction process of 0th order nulled phase mask is presented. In MA, multiple reflections of the grating modes at grating interfaces are considered by introducin...A simple modal analysis （MA） method to explain the diffraction process of 0th order nulled phase mask is presented. In MA, multiple reflections of the grating modes at grating interfaces are considered by introducing equivalent Fresnel coefficients. Analytical expressions of the diffraction efficiencies and modal guidelines for the 0th order hulled phase grating design are also presented. The phase mask structure, which comprises a high-index contrast HfO2 grating and a fused-silica substrate, is optimized using rigorous coupled-wave analysis around the 800-nm wavelength, after which the modal guideline for cancellation of the 0th order in a phase mask is verified. The proposed MA method illustrates the inherent physical mechanism of multiple reflections of the grating modes in the diffraction process, which can help to analyze and design both low-contrast and high-contrast gratings.展开更多
In this work three fuel consumption and exhaust emission models,ADVISOR,VT-MICRO and the European Environmental Agency Emission factors,have been used to obtain fuel consumption(FC)and exhaust emissions.These models h...In this work three fuel consumption and exhaust emission models,ADVISOR,VT-MICRO and the European Environmental Agency Emission factors,have been used to obtain fuel consumption(FC)and exhaust emissions.These models have been used at micro-scale,using the two signal treatment methods presented.The manuscript presents:1)a methodology to collect data in real urban driving cycles,2)an estimation of FC and tailpipe emissions using some available models in literature,and 3)a novel analysis of the results based on delivered wheel power.The results include Fuel Consumption(FC),CO_(2),NO_(x) and PM_(10) emissions,which are derived from the three simulators.In the first part of the paper we present a new procedure for incomplete drive cycle data treatment,which is necessary for real drive cycle acquisition in high density cities.Then the models are used to obtain second by second FC and exhaust emissions.Finally,a new methodology named Cycle Analysis by Ordered Power(CAbOP)is presented and used to compare the results.This method consists in the re-ordering of time dependant data,considering the wheel mechanical power domain instead of the standard time domain.This new strategy allows the 5 situations in drive cycles to be clearly visualized:hard breaking zone,slowdowns,idle or stop zone,sustained speed zone and acceleration zone.The complete methodology is applied in two real drive cycles surveyed in Barcelona(Spain)and the results are compared with a standardized WLTC urban cycle.展开更多
A fractional step scheme with modified characteristic finite differences run- ning in a parallel arithmetic is presented to simulate a nonlinear percolation system of multilayer dynamics of fluids in a porous medium w...A fractional step scheme with modified characteristic finite differences run- ning in a parallel arithmetic is presented to simulate a nonlinear percolation system of multilayer dynamics of fluids in a porous medium with moving boundary values. With the help of theoretical techniques including the change of regions, piecewise threefold quadratic interpolation, calculus of variations, multiplicative commutation rule of differ- ence operators, multiplicative commutation rule of difference operators, decomposition of high order difference operators, induction hypothesis, and prior estimates, an optimal order in 12 norm is displayed to complete the convergence analysis of the numerical algo- rithm. Some numerical results arising in the actual simulation of migration-accumulation of oil resources by this method are listed in the last section.展开更多
The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation ...The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.展开更多
In order to provide suggestions of development model for residential areas in the Wuling mountainous area with changes in the industrial model brought about by tourism development, the evaluation model of the developm...In order to provide suggestions of development model for residential areas in the Wuling mountainous area with changes in the industrial model brought about by tourism development, the evaluation model of the development modes of 8 local residential areas was constructed by using the ordering relation analysis method. It is concluded that Nanyuan Group belongs to relocation type;Shuijingya, Nanzhang, Miaota and Lijia groups are disentanglement type;Xiejia, Chazhang and Dengjia groups are control type. The study provides reference data for the community to balance the relationship between tourism development and traditional production and life, and has certain guiding significance for local community planning and development.展开更多
With a new approach,the general current expressions of two typical second order catalytic reactions are obtained for disk,hemispherical and spherical microelectrodes under steady-state conditions.This approach is base...With a new approach,the general current expressions of two typical second order catalytic reactions are obtained for disk,hemispherical and spherical microelectrodes under steady-state conditions.This approach is based on the concept of reaction layer.For the second order EC' reactions,we also discussed how it is possible to observe pseudo-first order or second order behavior.This consideration allows the study of the fast chemical reactions and systems where the bulk concentrations of the reactants are nearly equal.Regeneration of Fe^(3+)(EDTA) with H_2O_2 was selected as an example of a rapid catalytic reaction.展开更多
The Vold-Kalman(VK)order tracking filter plays a vital role in the order analysis of noise in various fields.However,owing to the limited accuracy of double-precision floating-point data type,the order of the filter c...The Vold-Kalman(VK)order tracking filter plays a vital role in the order analysis of noise in various fields.However,owing to the limited accuracy of double-precision floating-point data type,the order of the filter cannot be too high.This problem of accuracy makes it impossible for the filter to use a smaller bandwidth,meaning that the extracted order signal has greater noise.In this paper,the Python mpmath arbitrary-precision floating-point arithmetic library is used to implement a high-order VK filter.Based on this library,a filter with arbitrary bandwidth and arbitrary difference order can be implemented whenever necessary.Using the proposed algorithm,a narrower transition band and a flatter passband can be obtained,a good filtering effect can still be obtained when the sampling rate of the speed signal is far lower than that of the measured signal,and it is possible to extract narrowband signals from signals with large bandwidth.Test cases adopted in this paper show that the proposed algorithm has better filtering effect,better frequency selectivity,and stronger anti-interference ability compared with double-precision data type algorithm.展开更多
文摘Order analysis is regarded as one of the most significant method for monitoring and analyzing rotational machinery for the phenomenon of " frequency smear".However,the order analysis based on resampling is a signal processingwhich converts the constant time interval sampling into constant angle interval sampling,while with the variety of the rotational speed.The superiority of the order analysis is investigatedon implement of order analysis.Andthrough comparing the advantage and disadvantage between spectrum and order analysis,the paper will discuss the order analysis form a deep perspective.
文摘This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental benchmark with respect to the benchmark’s 180 microscopic total cross sections. This computation was made possible by applying the Third-Order Adjoint Sensitivity Analysis Methodology developed by Cacuci. The numerical results obtained in this work revealed that many of the 3<sup>rd</sup>-order sensitivities are significantly larger than their corresponding 1<sup>st</sup>- and 2<sup>nd</sup>-order ones, which is contrary to the widely held belief that higher-order sensitivities are all much smaller and hence less important than the first-order ones, for reactor physics systems. In particular, the largest 3<sup>rd</sup>-order relative sensitivity is the mixed sensitivity <img src="Edit_754b8437-dfdf-487d-af68-c78c637e6d4e.png" width="180" height="24" alt="" />of the PERP leakage response with respect to the lowest energy-group (30) total cross sections of <sup>1</sup>H (“isotope 6”) and <sup>239</sup>Pu (“isotope 1”). These two isotopes are shown in this work to be the two most important parameters affecting the PERP benchmark’s leakage response. By comparison, the largest 1<sup>st</sup>-order sensitivity is that of the PERP leakage response with respect to the lowest energy-group total cross section of isotope <sup>1</sup>H, having the value <img src="Edit_a5cfcc11-6a99-41ee-b844-a5ee84b454b3.png" width="100" height="24" alt="" />, while the largest 2<sup>nd</sup>-order sensitivity is <img src="Edit_05166a2b-97f7-43f1-98ff-b21368c00228.png" width="120" height="22" alt="" />. The 3<sup>rd</sup>-order sensitivity analysis presented in this work is the first ever such analysis in the field of reactor physics. The consequences of the results presented in this work on the uncertainty analysis of the PERP benchmark’s leakage response will be presented in a subsequent work.
基金Supported by the National Natural Science Foundation of China(No.51375423,51505410)the National Key Basic Research Program(No.2014CB046400)
文摘With many features,the magnetorheological fluid( MRF) damper is widely applied in the semiactive vibration control system. And sensitivity analysis is an important method to study the influence weight of various parameters on damping force characteristics. A mathematical model of the output damping force on the MRF damper is established by the mechanism modeling method,a first order output sensitivity equation is deduced and the expression of the first order output sensitivity function is obtained. The first-order sensitivity functions of ten design parameters are solved,and the influence degree of system parameters change on the output force of MRF damper is analyzed by comparing the sensitivity index of the parameters. Two sensitivities of vibration velocity and control current are obtained through experiment to prove the other parameters sensitivity analysis conclusion by analogy verification,which provides guidance for the structure optimization design of MRF damper.
基金Supported by the National Natural Science Foundation of China(No.60072027)
文摘With the conditions of small data size and low Signal-to-Noise Ratio (SNR), the application of Higher Order Statistics (HOS) is restrained not only by its high estimation variance,but also by its low estimation precision. Therefore, a modified HOS based Time Delay Estimation (TDE) algorithm is proposed to overcome these problems. Comparing with the conventional TDE algorithms, the estimation variance is improved greatly. A typical simulation example is completed in order to test the performance of the algorithm proposed, which shows that the proposed algorithm has advantages over the traditional ones in both detection performance and computation efficiency.
文摘Seventy-eight cases of retinoblastoma (Rb) diagnosed at the Eye ENT Hospital, Shanghai Medical University from 1953 to 1985 were studied. The results of multiple logistic regression analysis and conditional probability model showed that high fetal order had a moderate risk (OR=1.28, P<0.05) of developing unilateral Rb. Both unilateral and bilateral cases were independent of parental ages, and no interaction could be found between fetal order and paternal of maternal age; also, the effect of fetal order was not confounded by parental ages.
文摘Airframe structural optimization at different design stages results in new mass and stiffness distributions which modify the critical design loads envelop. Determination of aircraft critical loads is an extensive analysis procedure which involves simulating the aircraft at thousands of load cases as defmed in the certification requirements. It is computationally prohibitive to use a GFEM （Global Finite Element Model） for the load analysis, hence reduced order structural models are required which closely represent the dynamic characteristics of the GFEM. This paper presents the implementation of CMS （Component Mode Synthesis） method for the generation of high fidelity ROM （Reduced Order Model） of complex airframes. Here, sub-structuring technique is used to divide the complex higher order airframe dynamical system into a set of subsystems. Each subsystem is reduced to fewer degrees of freedom using matrix projection onto a carefully chosen reduced order basis subspace. The reduced structural matrices are assembled for all the subsystems through interface coupling and the dynamic response of the total system is solved. The CMS method is employed to develop the ROM of a Bombardier Aerospace business jet which is coupled with aerodynamic model for dynamic aeroelasticity loads analysis under gust turbulence. Another set of dynamic aeroelastic loads is also generated employing a stick model of same aircraft. Stick model is the reduced order modelling methodology commonly used in the aerospace industry based on stiffness generation by unitary loading application. The extracted aeroelastic loads from both models are compared against those generated employing the GFEM. Critical loads modal participation factors and modal characteristics of the different ROMs are investigated and compared against those of the GFEM. Results obtained show that the ROM generated using Craig Bampton CMS reduction process has a superior dynamic characteristics compared to the stick model.
基金supported by National Natural Science Foundation of China(Grant Nos. 51105004, 51175006)Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20111103120001)Beijing Municipal Education Commission Research Project, China(Grant No. KM201310005016)
文摘Order analysis for multi-Bennett linkages is a difficult topic in kinematics. Traditional methods fail to obtain the order of multi-Bennett linkages due to considering the special geometric distributions among joint axes. An order principle for multi-Bennett linkages is presented. For a summated multi-Bennett linkage, three procedures are included in the order principle. Firstly, a homogeneous screw equation is obtained by taking linear superposition operations and then the maximum order is determined according to linear dependency of all screws. Secondly, two theorems are employed to determine the maximum order, where the first is used to judge the linear independency of four-system screws and the second is fit for identifying the linear independency of five-system screws. Lastly, all possible cases in the order range are considered until the valid order is screened out. For a syncopated multi-Bennett linkage, an equivalent summated model is built and then the order analysis is the same as that of summated linkages. In order to verify the effectiveness of the presented order principle, the orders of summated 5R and 6R linkages as well as a syncopated 6R linkage are analyzed. The computed orders of the former two summated linkages are both 4 and the computed order of the last syncopated 6R linkage is 5. The results coincide with the prototype data. The advantage of the proposed principle is that it can get the correct order of a multi-Bennett linkage without solving the geometric conditions of joint axes and has wide application in variety of multi-Bennett linkages.
文摘A new kind of material cast polyurethane elastomers (CPUE) is introduced to take the place of rubber on load bearing wheel for the first time. Based on load bearing wheel dimensions, material properties and operating conditions, the structure of wheel flange is optimized by zero order finite element method. A detailed three dimensional finite element model of flange of load bearing wheel is developed and utilized to optimize structure of wheel flange. Its service life, which is affected by flange structure parameter, is analyzed by comparing the optimization results with those of prototype of wheel. The results of optimization are presented and the stress field of load bearing wheel in optimal dimension obtained by using finite element analysis method is demonstrated. The finite element analysis and optimization results show that the CPUE load bearing wheel is feasible and suitable for the tracked vehicle and has a guiding value in practice of the weighting design of the whole tracked vehicle.
文摘Through a higher-order boundary element method based on NURBS （Non-uniform Rational B-splines）, the calculation of second-order low-frequency forces and slow drift motions is conducted for floating bodies. In the floating body＇s inner domain, an auxiliary equation is obtained by applying a Green function which satisfies the solid surface condition. Then, the auxiliary equation and the velocity potential equation are combined in the fluid domain to remove the solid angle coefficient and the singularity of the double layer potentials in the integral equation. Thus, a new velocity potential integral equation is obtained. The new equation is extended to the inner domain to reheve the irregular frequency effects; on the basis of the order analysis, the comparison is made about the contribution of all integral terms with the result in the second-order tow-frequency problem; the higher-order boundary element method based on NURBS is apphed to calculate the geometric position and velocity potentials; the slow drift motions are calculated by the spectrum analysis method. Removing the solid angle coefficient can apply NURBS technology to the hydrodynamic calculation of floating bodies with complex surfaces, and the extended boundary integral method can reduce the irregular frequency effects. Order analysis shows that free surface integral can be neglected, and the numerical results can also prove the correctness of order analysis. The results of second-order low-frequency forces and slow drift motions and the comparison with the results from references show that the application of the NURBS technology to the second-order low-frequency problem is of high efficiency and credible results.
文摘AIM：To investigate quantitative and qualitative optical outcomes of single-step transepithelial photorefractive keratectomy（Trans PRK）in high myopia.METHODS：In a prospective interventional case-series,30 eyes with high myopia（-6.00 to-8.75 D）with（up to-3.00 D）or without astigmatism were enrolled from Bina Eye Hospital,Tehran,Iran. One-step Trans PRK was performed with aberration-free aspherical optimized profile and SCHWIND AMARIS 500 laser. One-year follow-up results for refraction,visual acuities,vector analysis,ocular wavefront（OWF）and corneal wave-front（CWF）higher order aberrations（HOA）,contrast sensitivity（CS）,and postoperative haze were assessed.RESULTS：After the surgery,both photopic and mesopic CSs significantly improved（both P〈0.001）. We detected significant induction of OWF coma and trefoil（P〈0.001 for both）HOAs; CWF coma（P=0.002）,spherical（P〈0.001）,and tetrafoil（P=0.003）HOAs in 6 mm analysis diameter; and CWF trefoil（P=0.04）HOA in 4 mm analysis diameter. The range of mean induction observed for various HOAs was0.005-0.11 μm. The 86.7% of eyes reached an uncorrected distance visual acuity of 20/20 or better; 96.7% of eyes were within ±0.5 D of targeted spherical refraction. In vector analysis,mean correction index value was 1.03 and mean index of success was 0.22. By 12mo after the operation,no eye lost any number of corrected distancevisual acuity lines. We detected no corneal haze greater than 1~＋ throughout the follow-up.CONCLUSION：Our findings show promising effects of single-step Trans PRK on quality of vision in high myopic eyes. It also improves refraction and visual acuity.
基金supported by the National Natural Science Foundation of China(Nos.60878035,61078050,and 61127013)the Shanghai Science and Technology Committee(No.11DZ2290302)
文摘A simple modal analysis （MA） method to explain the diffraction process of 0th order nulled phase mask is presented. In MA, multiple reflections of the grating modes at grating interfaces are considered by introducing equivalent Fresnel coefficients. Analytical expressions of the diffraction efficiencies and modal guidelines for the 0th order hulled phase grating design are also presented. The phase mask structure, which comprises a high-index contrast HfO2 grating and a fused-silica substrate, is optimized using rigorous coupled-wave analysis around the 800-nm wavelength, after which the modal guideline for cancellation of the 0th order in a phase mask is verified. The proposed MA method illustrates the inherent physical mechanism of multiple reflections of the grating modes in the diffraction process, which can help to analyze and design both low-contrast and high-contrast gratings.
文摘In this work three fuel consumption and exhaust emission models,ADVISOR,VT-MICRO and the European Environmental Agency Emission factors,have been used to obtain fuel consumption(FC)and exhaust emissions.These models have been used at micro-scale,using the two signal treatment methods presented.The manuscript presents:1)a methodology to collect data in real urban driving cycles,2)an estimation of FC and tailpipe emissions using some available models in literature,and 3)a novel analysis of the results based on delivered wheel power.The results include Fuel Consumption(FC),CO_(2),NO_(x) and PM_(10) emissions,which are derived from the three simulators.In the first part of the paper we present a new procedure for incomplete drive cycle data treatment,which is necessary for real drive cycle acquisition in high density cities.Then the models are used to obtain second by second FC and exhaust emissions.Finally,a new methodology named Cycle Analysis by Ordered Power(CAbOP)is presented and used to compare the results.This method consists in the re-ordering of time dependant data,considering the wheel mechanical power domain instead of the standard time domain.This new strategy allows the 5 situations in drive cycles to be clearly visualized:hard breaking zone,slowdowns,idle or stop zone,sustained speed zone and acceleration zone.The complete methodology is applied in two real drive cycles surveyed in Barcelona(Spain)and the results are compared with a standardized WLTC urban cycle.
基金Project supported by the Major State Basic Research Program of China (No. 19990328)the National Tackling Key Problems Program (No. 20050200069)+4 种基金the National Natural Science Foundation of China (Nos. 10771124, 10372052, 11101244, and 11271231)the Doctorate Foundation of the Ministry of Education of China (No. 20030422047)the Shandong Province Natural Science Foundation (No. ZR2009AQ012)the Independent Innovation Foundation of Shandong University(No. 2010TS031)the Scientific Research Award Fund for Excellent Middle-Aged and Young Scientists of Shandong Province (No. BS2009NJ003)
文摘A fractional step scheme with modified characteristic finite differences run- ning in a parallel arithmetic is presented to simulate a nonlinear percolation system of multilayer dynamics of fluids in a porous medium with moving boundary values. With the help of theoretical techniques including the change of regions, piecewise threefold quadratic interpolation, calculus of variations, multiplicative commutation rule of differ- ence operators, multiplicative commutation rule of difference operators, decomposition of high order difference operators, induction hypothesis, and prior estimates, an optimal order in 12 norm is displayed to complete the convergence analysis of the numerical algo- rithm. Some numerical results arising in the actual simulation of migration-accumulation of oil resources by this method are listed in the last section.
基金supported by the National Natural Science Foundation of China(41804035,41374027)。
文摘The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.
基金Sponsored by Scientific Research Project of Hunan Provincial Department of Education in 2020(20C1516)Innovation and Entrepreneurship Training Project of Jishou University in 2020(JSDX2020366)。
文摘In order to provide suggestions of development model for residential areas in the Wuling mountainous area with changes in the industrial model brought about by tourism development, the evaluation model of the development modes of 8 local residential areas was constructed by using the ordering relation analysis method. It is concluded that Nanyuan Group belongs to relocation type;Shuijingya, Nanzhang, Miaota and Lijia groups are disentanglement type;Xiejia, Chazhang and Dengjia groups are control type. The study provides reference data for the community to balance the relationship between tourism development and traditional production and life, and has certain guiding significance for local community planning and development.
基金Project supported by the National Natural Science Foundation of ChinaChangchun Institute of Applied Chemistry of Chinese Academy of Sciences.
文摘With a new approach,the general current expressions of two typical second order catalytic reactions are obtained for disk,hemispherical and spherical microelectrodes under steady-state conditions.This approach is based on the concept of reaction layer.For the second order EC' reactions,we also discussed how it is possible to observe pseudo-first order or second order behavior.This consideration allows the study of the fast chemical reactions and systems where the bulk concentrations of the reactants are nearly equal.Regeneration of Fe^(3+)(EDTA) with H_2O_2 was selected as an example of a rapid catalytic reaction.
基金The paper is supported by the National Science Foundation for Young Scientists of China,Intelligent collaboration control of all-terrain vehicle via active attitude,and four-wheel steering control systems(Grant No.51705185).
文摘The Vold-Kalman(VK)order tracking filter plays a vital role in the order analysis of noise in various fields.However,owing to the limited accuracy of double-precision floating-point data type,the order of the filter cannot be too high.This problem of accuracy makes it impossible for the filter to use a smaller bandwidth,meaning that the extracted order signal has greater noise.In this paper,the Python mpmath arbitrary-precision floating-point arithmetic library is used to implement a high-order VK filter.Based on this library,a filter with arbitrary bandwidth and arbitrary difference order can be implemented whenever necessary.Using the proposed algorithm,a narrower transition band and a flatter passband can be obtained,a good filtering effect can still be obtained when the sampling rate of the speed signal is far lower than that of the measured signal,and it is possible to extract narrowband signals from signals with large bandwidth.Test cases adopted in this paper show that the proposed algorithm has better filtering effect,better frequency selectivity,and stronger anti-interference ability compared with double-precision data type algorithm.
