The electrochemical methanol oxidation is a crucial reaction in the conversion of renewable energy.To enable the widespread adoption of direct methanol fuel cells(DMFCs),it is essential to create and engineer catalyst...The electrochemical methanol oxidation is a crucial reaction in the conversion of renewable energy.To enable the widespread adoption of direct methanol fuel cells(DMFCs),it is essential to create and engineer catalysts that are both highly effective and robust for conducting the methanol oxidation reaction(MOR).In this work,trimetallic PtCoRu electrocatalysts on nitrogen-doped carbon and multi-wall carbon nanotubes(PtCoRu@NC/MWCNTs)were prepared through a two-pot synthetic strategy.The acceleration of CO oxidation to CO_(2) and the blocking of CO reduction on adjacent Pt active sites were attributed to the crucial role played by cobalt atoms in the as-prepared electrocatalysts.The precise control of Co atoms loading was achieved through precursor stoichiometry.Various physicochemical techniques were employed to analyze the morphology,element composition,and electronic state of the catalyst.Electrochemical investigations and theoretical calculations confirmed that the Pt_(1)Co_(3)Ru_(1)@NC/MWCNTs exhibit excellent electrocatalytic performance and durability for the process of MOR.The enhanced MOR activity can be attributed to the synergistic effect between the multiple elements resulting from precisely controlled Co loading content on surface of the electrocatalyst,which facilitates efficient charge transfer.This interaction between the multiple components also modifies the electronic structures of active sites,thereby promoting the conversion of intermediates and accelerating the MOR process.Thus,achieving precise control over Co loading in PtCoRu@NC/MWCNTs would enable the development of high-performance catalysts for DMFCs.展开更多
Electrocatalytic glucose oxidation reaction(GOR)has attracted much attention owing to its crucial role in biofuel cell fabrication.Herein,we load MoO_(3)nanoparticles on carbon nanotubes(CNTs)and use a discharge proce...Electrocatalytic glucose oxidation reaction(GOR)has attracted much attention owing to its crucial role in biofuel cell fabrication.Herein,we load MoO_(3)nanoparticles on carbon nanotubes(CNTs)and use a discharge process to prepare a noblemetal-free MC-60 catalyst containing MoO_(3),Mo_(2)C,and a Mo_(2)C–MoO_(3)interface.In the GOR,MC-60 shows activity as high as 745μA/(mmol/L cm^(2)),considerably higher than those of the Pt/CNT(270μA/(mmol/L cm^(2)))and Au/CNT catalysts(110μA/(mmol/L cm^(2))).In the GOR,the response minimum on MC-60 is as low as 8μmol/L,with a steady-state response time of only 3 s.Moreover,MC-60 has superior stability and anti-interference ability to impurities in the GOR.The better performance of MC-60 in the GOR is attributed to the abundant Mo sites bonding to C and O atoms at the MoO_(3)–Mo_(2)C interface.These Mo sites create active sites for promoting glucose adsorption and oxidation,enhancing MC-60 performance in the GOR.Thus,these results help to fabricate more effi cient noble-metal-free catalysts for the fabrication of glucose-based biofuel cells.展开更多
Interfacial engineering is a promising approach for enhancing electrochemical performance,but rich and efficient interfacial active sites remain a challenge in fabrication.Herein,RuO_(2)-PdO heterostructure nanowire n...Interfacial engineering is a promising approach for enhancing electrochemical performance,but rich and efficient interfacial active sites remain a challenge in fabrication.Herein,RuO_(2)-PdO heterostructure nanowire networks(NWs) with rich interfaces and defects supported on carbon(RuO_(2)-PdO NWs/C) for alkaline hydrogen oxidation reaction(HOR) was formed by a seed induction-oriented attachment-thermal treatment method for the first time.As expected,the RuO_(2)-PdO NWs/C(72.8% Ru atomic content in metal) exhibits an excellent activity in alkaline HOR with a mass specific exchange current density(jo,m) of 1061 A gRuPd-1,which is 3.1 times of commercial Pt/C and better than most of the reported nonPt noble metal HOR electrocatalysts.Even at the high potential(~0.5 V vs.RHE) or the presence of CO(5 vol%),the RuO_(2)-PdO NWs/C still effectively catalyzes the alkaline HOR.Structure/electrochemical analysis and theoretical calculations reveal that the interfaces between RuO_(2) and PdO act as the active sites.The electronic interactions between the two species and the rich defects for the interfacial active sites weaken the adsorption of Had,also strengthen the adsorption of OHad,and accelerate the alkaline HOR process.Moreover,OHadon RuO_(2) can spillover to the interfaces,keeping the RuO_(2)-PdO NWs/C with the stable current density at higher potential and high resistance to CO poisoning.展开更多
Oxygen evolution reaction(OER)as a half-anodic reaction of water splitting hinders the overall reaction efficiency owing to its thermodynamic and kinetic limitations.Iodide oxidation reaction(IOR)with low thermodynami...Oxygen evolution reaction(OER)as a half-anodic reaction of water splitting hinders the overall reaction efficiency owing to its thermodynamic and kinetic limitations.Iodide oxidation reaction(IOR)with low thermodynamic barrier and rapid reaction kinetics is a promising alternative to the OER.Herein,we present a molybdenum disulfide(MoS_(2))electrocatalyst for a high-efficiency and remarkably durable anode enabling IOR.MoS_(2)nanosheets deposited on a porous carbon paper via atomic layer deposition show an IOR current density of 10 mA cm^(–2)at an anodic potential of 0.63 V with respect to the reversible hydrogen electrode owing to the porous substrate as well as the intrinsic iodide oxidation capability of MoS_(2)as confirmed by theoretical calculations.The lower positive potential applied to the MoS_(2)-based heterostructure during IOR electrocatalysis prevents deterioration of the active sites on MoS_(2),resulting in exceptional durability of 200 h.Subsequently,we fabricate a two-electrode system comprising a MoS_(2)anode for IOR combined with a commercial Pt@C catalyst cathode for hydrogen evolution reaction.Moreover,the photovoltaic–electrochemical hydrogen production device comprising this electrolyzer and a single perovskite photovoltaic cell shows a record-high current density of 21 mA cm^(–2)at 1 sun under unbiased conditions.展开更多
The development of highly efficient electrocatalysts toward hydrogen oxidation reaction(HOR)under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cells(AEMFCs).However,the HOR ...The development of highly efficient electrocatalysts toward hydrogen oxidation reaction(HOR)under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cells(AEMFCs).However,the HOR kinetics in alkaline is two to three orders of magnitude slower than that in acid.More critically,fundamental understanding of the sluggish kinetics derived from the p H effect is still debatable.In this review,the recent development of understanding HOR mechanism and rational design of advanced HOR electrocatalysts are summarized.First,recent advances in the theories focusing on fundamental understandings of HOR under alkaline electrolyte are comprehensively discussed.Then,from the aspect of intermediates binding energy,optimizing hydrogen binding energy(HBE)and increasing hydroxyl binding energy(OHBE),the strategies for designing efficient alkaline HOR catalysts are summarized.At last,perspectives for the future research on alkaline HOR are pointed out.展开更多
This work demonstrates the outstanding performance of alloyed Au1 Pt1 nanoparticles on hydrogen oxidation reaction(HOR)in alkaline solution.Due to the weakened hydrogen binding energy caused by uniform incorporation o...This work demonstrates the outstanding performance of alloyed Au1 Pt1 nanoparticles on hydrogen oxidation reaction(HOR)in alkaline solution.Due to the weakened hydrogen binding energy caused by uniform incorporation of Au,the alloyed Au1Pt1/C nanoparticles exhibit superior HOR activity than commercial PtRu/C.On the contrary,the catalytic performance of the phase-segregated Au2Pt1/C and Au1Pt1/C bimetallic nanoparticles in HOR is significantly worse.Moreover,Au1Pt1/C shows a remarkable durability with activity dropping only 4% after 3000 CV cycles,while performance attenuation of commercial PtRu/C is high up to 15% under the same condition.Our results indicate that the alloyed Au1Pt1/C is a promising candidate to substitute commercial PtRu/C for hydrogen oxidation reaction in alkaline electrolyte.展开更多
Exploring effective, durable, and affordable electrocatalysts of methanol oxidation reaction(MOR) is of vital significance for the industrial application of direct methanol fuel cells. Herein, an efficient, general,an...Exploring effective, durable, and affordable electrocatalysts of methanol oxidation reaction(MOR) is of vital significance for the industrial application of direct methanol fuel cells. Herein, an efficient, general,and expandable method is developed to synthesis two-dimensional(2D) ternary Pt Bi M nanoplates(NPLs), in which various M(Co, Ni, Cu, Zn, Sn) is severed as the third component to the binary Pt Bi system. The MOR performance of Pt Bi M NPLs is entirely investigated, demonstrating that both the MOR activity and durability is enhanced with the introduction of the additional composition. Pt3Bi3Zn NPLs shows much higher MOR activity and stability than that of the Pt Bi counterparts, not to mention the current advanced Pt Ru/C and Pt/C catalysts. The prominent performances are attributed to the modulated electronic structure of the surface Pt in Pt Bi NPLs by the addition of Zn, resulting in a weakened affination between Pt and the adsorbed poisoning species(mainly CO) compared with Pt Bi NPLs, verified by density functional theory(DFT) calculations. In addition, the absorbed OH can be generated on the surface of Zn atom due to its favorable water activation properties, thus the CO removal on the adjacent Pt atoms is accelerated, further leading to a high activity and anti-poisoning performance of the resulting Pt_(3)Bi_(3)Zn catalyst. This work provides new insights and robust strategy for highly efficient MOR electrocatalyst with extraordinary anti-poisoning performance and stability.展开更多
A hydrogen evolution-assisted one-pot aqueous approach was developed for facile synthesis of trimetallic Pd Ni Ru alloy nanochain-like networks(Pd Ni Ru NCNs) by only using KBH_4 as the reductant, without any specific...A hydrogen evolution-assisted one-pot aqueous approach was developed for facile synthesis of trimetallic Pd Ni Ru alloy nanochain-like networks(Pd Ni Ru NCNs) by only using KBH_4 as the reductant, without any specific additive(e.g. surfactant, polymer, template or seed). The products were mainly investigated by transmission electron microscopy(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The hierarchical architectures were formed by the oriented assembly growth and the diffusioncontrolled deposition in the presence of many in-situ generated hydrogen bubbles. The architectures had the largest electrochemically active surface area(ECSA) of 84.32 m^2 g^(–1) Pdthan Pd Ni nanoparticles(NPs,65.23 m^2 g^(–1) Pd), Pd Ru NPs(23.12 m^2 g^(–1) Pd), Ni Ru NPs(nearly zero), and commercial Pd black(6.01 m^2 g^(–1) Pd), outperforming the referenced catalysts regarding the catalytic characters for hydrazine oxygen reaction(HOR). The synthetic route provides new insight into the preparation of other trimetallic nanocatalysts in fuel cells.展开更多
Urea oxidation reaction (UOR),which has favorable thermodynamic energy barriers compared with oxygen evolution reaction (OER),can provide more cost-effective electrons for the renewable energy systems,but is trapped b...Urea oxidation reaction (UOR),which has favorable thermodynamic energy barriers compared with oxygen evolution reaction (OER),can provide more cost-effective electrons for the renewable energy systems,but is trapped by its sluggish UOR kinetics and intricate reaction intermediates formation/desorption process.Herein,we report a novel and effective electrocatalyst consisting of carbon cloth supported nitrogen vacancies-enriched Ce-doped Ni_(3)N hierarchical nanosheets (Ce-Ni_(3)N @CC) to optimize the flat-footed UOR kinetics,especially the stiff rate-determine CO_(2)desorption step of UOR.Upon the introduction of valance state variable Ce,the resultant nitrogen vacancies enriched Ce-Ni_(3)N @CC exhibits an enhanced UOR performance where the operation voltage requires only 1.31 V to deliver the current density of 10 mA cm^(-2),which is superior to that of Ni_(3)N @CC catalyst (1.36 V) and other counterparts.Density functional theory (DFT) results demonstrate that the incorporation of Ce in Ni_(3)N lowers the formation energy of nitrogen vacancies,resulting in rich nitrogen vacancies in Ce-Ni_(3)N @CC.Moreover,the nitrogen vacancies together with Ce doping optimize the local charge distribution around Ni sites,and balance the adsorption energy of CO_(2)in the rate-determining step (RDS),as well as affect the initial adsorption structure of urea,leading to the superior UOR catalytic performance of Ce-Ni_(3)N @CC.When integrating the Ce-Ni_(3)N catalyst in UOR//HER and UOR//CO_(2)R flow electrolyzer,both of them perform well with low operation voltage and robust long-term stability,proofing that the thermodynamically favorable UOR can act as a suitable substitute anodic reaction compared with that of OER.Our findings here not only provide a novel UOR catalyst but also offer a promising design strategy for the future development of energy-related devices.展开更多
Noble metal-based electrocatalysts present high activities for methanol oxidation reaction(MOR),but are limited by their high cost,low stability and poor resistance to carbon monoxide(CO) poisoning.The development of ...Noble metal-based electrocatalysts present high activities for methanol oxidation reaction(MOR),but are limited by their high cost,low stability and poor resistance to carbon monoxide(CO) poisoning.The development of active and stable non-noble metal electrocatalysts for MOR is desired,but remains a challenge.Herein,we report a simple strategy to make copper nanocrystal/nitrogen-doped carbon(Cu/N-C)monoliths,which can serve as active and robust electrodes for MOR.Copper nanocrystals were electrochemically deposited onto a conductive polyaniline hydrogel and calcined to form Cu/N-C monolith,where the active copper nanocrystals are protected by nitrogen-doped carbon.Owing to their extremely high electrical conductivity(1.25 × 10^(5) S cm^(-1)) and mechanical robustness,these Cu/N-C monoliths can be directly used as electrodes for MOR,without using substrates or additives.The optimal Cu/N-C(FT)@500 monolith shows a high MOR activity of 189 mA cm^(-2) at 0.6 V vs.SCE in alkaline methanol solution,superior to most of reported Cu-based MOR catalysts.Cu/N-C(FT)@500 also presents a better stability than Pt/C catalyst in the long-term MOR test at high current densities.Upon carbon monoxide(CO) poisoning,Cu/N-C(FT)@500 retains 96% of its MOR activity,far exceeding the performance of Pt/C catalyst(61% retention).Owing to its facile synthesis,outstanding activity,high stability and mechanical robustness,Cu/N-C(FT)@500 monolith is promising as a low-cost,efficient and CO-resistant electrocatalyst for MOR.展开更多
Two-dimensional coordination polymers(CPs) have aroused tremendous interest as electrocatalysts because the catalytic performance could be fine-tuned by their well-designed coordination layers with highly accessible a...Two-dimensional coordination polymers(CPs) have aroused tremendous interest as electrocatalysts because the catalytic performance could be fine-tuned by their well-designed coordination layers with highly accessible and active metal sites.However,it remains great challenge for CP-based catalysts to be utilized for electrocatalytic oxidation reactions due to their inefficient activities and low catalytic stabilities.Herein,we applied a mixed-metal strategy to fabricate two-dimensional Co_xNi_(1-x)-CPs with dual active sites for electrocatalytic water and urea oxidation.By metal ratio regulation in the twodimensional layer,an optimized Co_(2/3)Ni_(1/3)-CP exhibits a water oxidation performance with an overpotential of 325 mV at a current density of 10 mA cm^(-2) and a Tafel slope of 86 mV dec^(-1) in alkaline solution for oxygen evolution reaction.Importantly,a lower potential than that of commercial RuO_(2) is observed over20 mA cm^(-2).Co_(2/3)Ni_(1/3)-CP also displays a potential of 1.381 V at 10 mA cm^(-2) for urea oxidation reaction and a Tafel slope of 124 mV dec^(-1).This mixed-metal strategy to maximize synergistic effect of different metal centers may ultimately lead to promising electrocatalysts for small molecule oxidation reaction.展开更多
Problems associated with carbon support corrosion under operating fuel cell conditions require the identification of alternative supports for platinum-based nanosized electrocatalysts.Platinum supported on manganese v...Problems associated with carbon support corrosion under operating fuel cell conditions require the identification of alternative supports for platinum-based nanosized electrocatalysts.Platinum supported on manganese vanadate(Pt/MnV_(2)O_(6))was prepared by microwave irradiation method and characterized using X-ray diffraction,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,scanning electron microscopy with energy dispersive spectroscopy,and transmission electron microscopy.The borohydride oxidation reaction(BOR)on Pt/MnV_(2)O_(6) was studied in highly alkaline media using voltammetry,chronoamperometry,and electrochemical impedance spectroscopy.BOR electrocatalytic activity of Pt/MnV_(2)O_(6) was also compared with that of commercial Pt/C(46 wt%Pt)electrocatalyst.The apparent activation energy of BOR at Pt/MnV_(2)O_(6) was estimated to be 32 k J mol^(-1) and the order of reaction to be 0.51,indicating that borohydride hydrolysis proceeds in parallel with its oxidation.Long-term stability of Pt/MnV_(2)O_(6) under BOR typical conditions was observed.A laboratory-scale direct borohydride fuel cell assembled with a Pt/MnV_(2)O_(6) anode reached a specific power of 274 W g^(-1).Experimental results on Pt/MnV_(2)O_(6) were complemented by DFT calculations,which indicated good adherence of Pt to MnV_(2)O_(6),beneficial for electrocatalyst stability.展开更多
Methanol fuel cells have been intensively developed as clean and high-efficiency energy conversion system due to their high efficiency and low emission of pollutants.Here,we developed a simple aqueous synthetic method...Methanol fuel cells have been intensively developed as clean and high-efficiency energy conversion system due to their high efficiency and low emission of pollutants.Here,we developed a simple aqueous synthetic method to prepare bimetallic PdAu nanoflowers catalysts for methanol oxidation reaction(MOR)in alkaline environment.Their composition can be directly tuned by changing the ratio between Pd and Au precursors.Compared with commercial Pd/C catalyst,all of the PdAu nanoflowers catalysts show the enhanced catalytic activity and durability.In particular,the PdAu nanoflowers specific activity reached 0.72 mA/cm^(2),which is 14 times that of commercial Pd/C catalyst.The superior MOR activity could be attributed to the unique porous structure and the shift of the d-band center of Pd.展开更多
Rhodium nanoparticle-loaded carbon black (Rh/CB) was prepared by a wet method, and its activity and durability for glycerol oxidation reaction (GOR) in alkaline medium were compared with Pt, Pd and Au nanoparticle-loa...Rhodium nanoparticle-loaded carbon black (Rh/CB) was prepared by a wet method, and its activity and durability for glycerol oxidation reaction (GOR) in alkaline medium were compared with Pt, Pd and Au nanoparticle-loaded CB (Pt/CB, Pd/CB and Au/CB). In the cyclic voltammogram of the Rh/CB electrode, the redox waves due to hydrogen adsorption/desorption and the surface OH monolayer formation/reduction were observed at more negative potentials than the Pt/CB and Pd/CB electrodes. The onset and peak potentials of the GOR current densities for the Rh/CB electrode were ca. –0.55 and –0.30 V vs. Hg/HgO, respectively, which were 0.10 and 0.20 V more negative than the Pt/CB electrode whose GOR activity was the best, indicating that Rh was a fascinating metal for reducing the overpotential for GOR. In the electrostatic electrolysis with the Rh/CB and Pt/CB electrodes, the decrease in the GOR current density in the former with time was suppressed compared to that in the latter, suggesting that the tolerance to poisoning for the Rh/CB electrode was superior to that for the Pt/CB electrode.展开更多
To improve the activity for glycerol oxidation reaction (GOR) of Pt, PtAg (mole ratio of Pt/Ag = 3 and 1) alloy nanoparticle-loaded carbon black (Pt/CB, PtAg(3:1)/CB, PtAg(1:1)/CB) catalysts were prepared by a wet met...To improve the activity for glycerol oxidation reaction (GOR) of Pt, PtAg (mole ratio of Pt/Ag = 3 and 1) alloy nanoparticle-loaded carbon black (Pt/CB, PtAg(3:1)/CB, PtAg(1:1)/CB) catalysts were prepared by a wet method. The resultant catalysts, moreover, were heat-treated in a N2 atmosphere at 200°C. The alloying of Pt with Ag for each PtAg/CB was confirmed by X-ray diffractometry and electron dispersive X-ray spectrometry. The heat-treatment did not change the crystal structure of the PtAg alloys and increased their particle size. X-ray photoelectron spectroscopy exhibited that stabilizers were completely removed from the PtAg alloy surface, and the Pt4f and Ag3d doublets due to metallic Pt and Ag, respectively, shifted to lower binding energies, supporting the alloying of Pt with Ag. Both PtAg/CB electrodes had two oxidation waves of glycerol irrespective of heat-treatment, which was different from the Pt/CB electrode. The onset potential of the first oxidation wave was -0.60 V, which was 0.20 V less positive than that for the Pt/CB electrode, indicating the alloying of Pt with Ag greatly improved the GOR activity of Pt. The heat-treated PtAg(3:1)/ CB electrode improved the GOR current density of the second oxidation peak. In the potentiostatic electrolysis at -0.1 and 0 V for both PtAg/CB electrodes, the ratio of oxidation current density at 60 min to that at 5 min (j<sub>60</sub>/j<sub>5</sub>), an indicator of the catalyst deterioration, at 0 V was higher than that at -0.1 V, because the adsorbed oxidation intermediates were greatly consumed at the larger overpotential. The heat-treatment of the PtAg(3:1)/CB electrode increased the j60</sub>/j5</sub> value at -0.1 V but decreased that at 0 V. This could be attributed to the formation of high-order oxidation intermediates which might have stronger poisoning effect.展开更多
It is still a lack of bifunctional catalysts for ammonia oxidation reaction(AOR)and hydrogen evolution reaction(HER)due to their different reaction mechanisms.In this work,P is doped into PtZn alloy by calcination wit...It is still a lack of bifunctional catalysts for ammonia oxidation reaction(AOR)and hydrogen evolution reaction(HER)due to their different reaction mechanisms.In this work,P is doped into PtZn alloy by calcination with NaH_(2)PO_(2) as P source to induce the lattice tensile strain of Pt and the electronic interaction between P and Zn,which optimizes the AOR and HER activity simultaneously.The sample with the optimal P content can drive the AOR peak current density of 293.6 mA·mgPt^(-1),which is almost 2.7 times of Pt.For HER,the overpotential at^(-1)0 mA·cm^(-2) is only 23 mV with Tafel slope of 34.1 mV·dec^(-1).Furthermore,only 0.59 V is needed to obtain 50 mA·mgPt^(-1) for ammonia electrolysis under a two-electrode system.Therefore,this work shows an ingenious method to design bifunctional catalysts for ammonia electrolysis.展开更多
To achieve the goals of the peak carbon dioxide emissions and carbon neutral,the development and utilization of sustainable clean energy are extremely important.Hydrogen fuel cells are an important system for converti...To achieve the goals of the peak carbon dioxide emissions and carbon neutral,the development and utilization of sustainable clean energy are extremely important.Hydrogen fuel cells are an important system for converting hydrogen energy into electrical energy.However,the slow hydrogen oxidation reaction(HOR)kinetics under alkaline conditions has limited its development.Therefore,elucidating the catalytic mechanism of HOR in acidic and alkaline media is of great significance for the construction of highly active and stable catalysts.In terms of practicality,Pt is still the primary choice for commercialization of fuel cells.On the above basis,we first introduced the hydrogen binding energy theory and bifunctional theory used to describe the HOR activity,as well as the pH dependence.After that,the rational design strategies of Pt-based HOR catalysts were systematically classified and summarized from the perspective of activity descriptors.In addition,we further emphasized the importance of theoretical simulations and in situ characterization in revealing the HOR mechanism,which is crucial for the rational design of catalysts.Moreover,the practical application of Pt-based HOR catalysts in fuel cells was also presented.In closing,the current challenges and future development directions of HOR catalysts were discussed.This review will provide a deep understanding for exploring the mechanism of highly efficient HOR catalysts and the development of fuel cells.展开更多
The overall energy efficiency of electrochemical systems is severely hindered by the traditional anodic oxygen evolution reaction(OER).Utilizing urea oxidation reaction(UOR)with lower thermodynamic potential to replac...The overall energy efficiency of electrochemical systems is severely hindered by the traditional anodic oxygen evolution reaction(OER).Utilizing urea oxidation reaction(UOR)with lower thermodynamic potential to replace OER provides a promising strategy to enhance the energy efficiency.Amorphous and heterojunctions electrocatalysts have been aroused extensive studies owing to their unique physicochemical properties and outperformed activity.Herein,we report a simple method to construct a novel crystalline-amorphous NiO-CrO_(x)heterojunction grown on Ni foam for UOR electrocatalyst.The NiO-CrO_(x)electrocatalyst displays excellent UOR performance with an ultralow working potential of 1.32 V at 10 mA·cm^(−2)and ultra-long stability about 5 days even at 100 mA·cm^(−2).In-situ Raman analysis and temperature-programmed desorption(TPD)measurement verify that the presence of the amorphous CrO_(x)phase can boost the reconstruction from NiO to active NiOOH species and enhance adsorption ability of urea molecule.Besides,the unique crystalline-amorphous interfaces are also benefit to improving the UOR performance.展开更多
Morphology engineering has been developed as one of the most widely used strategies for improving the performance of electrocatalysts.However,the harsh reaction conditions and cumbersome reaction steps during the nano...Morphology engineering has been developed as one of the most widely used strategies for improving the performance of electrocatalysts.However,the harsh reaction conditions and cumbersome reaction steps during the nanomaterials synthesis still limit their industrial applications.Herein,one-dimensional(1D)novel-segmented PtTe porous nanochains(PNCs)were successfully synthesized by the template methods assisted by Pt autocatalytic reduction.The PtTe PNCs consist of consecutive mesoporous architectures that provide a large electrochemical surface area(ECSA)and abundant active sites to enhance methanol oxidation reaction(MOR).Furthermore,1D nanostructure as a robust sustaining frame can maintain a high mass/charge transfer rate in a long-term durability test.After 2,000 cyclic voltammetry(CV)cycles,the ECSA value of PtTe PNCs remained as high as 44.47 m^(2)·gPt^(-1),which was much larger than that of commercial Pt/C(3.95 m^(2)·gPt^(-1)).The high catalytic activity and durability of PtTe PNCs are also supported by CO stripping test and density functional theory calculation.This autocatalytic reduction-assisted synthesis provides new insights for designing efficient low-dimensional nanocatalysts.展开更多
Cytochrome P450 enzymes (P450s) belong to a large family of oxidative hemeproteins and catalyze highly diverse oxygenation reactions that are involved in the biosynthesis of various natural products. Here, we report a...Cytochrome P450 enzymes (P450s) belong to a large family of oxidative hemeproteins and catalyze highly diverse oxygenation reactions that are involved in the biosynthesis of various natural products. Here, we report a multifunctional cytochrome P450 enzyme, PyrE2, which catalyzes the regioselective, successive 6-electron oxidation of an inert methyl group to produce a carboxyl product through formation of the hydroxyl and aldehyde intermediates in pyrroindomycin biosynthesis. The time-course biotransformation was characterized by the presence of the hydroxyl and aldehyde intermediates, the lag of the formation of the carboxyl product, and the subsequent loss of both intermediates, indicating that each 2-electron oxidation exhibits the distributive mechanism that requires substrate binding and product releasing. Bioinformatics analysis shows that the homologs of pyrE2 are common in the gene clusters of the spirotetronates varying in the oxidative state of the corresponding exocyclic carbon, indicating the generality and diversity of P450-catalyzed oxygenation in related biosynthetic pathways.展开更多
基金financially supported by the National Natural Science Foundation of China (52200076,22169005,52370057)the Growth Project of Young Scientific and Technological Talents in General Colleges and Universities in Guizhou Province ([2022]143)+4 种基金the Science and Technology Foundation of Guizhou Province ([2022]109)the Natural Science Special Foundation of Guizhou University (202017,702775203301)the Natural Science Foundation of Chongqing (CSTB2022NSCQ-BHX0035)the Special Research Assistant Program of Chinese Academy of Sciencethe Research Foundation of Chongqing University of Science and Technology (ckrc2022026)。
文摘The electrochemical methanol oxidation is a crucial reaction in the conversion of renewable energy.To enable the widespread adoption of direct methanol fuel cells(DMFCs),it is essential to create and engineer catalysts that are both highly effective and robust for conducting the methanol oxidation reaction(MOR).In this work,trimetallic PtCoRu electrocatalysts on nitrogen-doped carbon and multi-wall carbon nanotubes(PtCoRu@NC/MWCNTs)were prepared through a two-pot synthetic strategy.The acceleration of CO oxidation to CO_(2) and the blocking of CO reduction on adjacent Pt active sites were attributed to the crucial role played by cobalt atoms in the as-prepared electrocatalysts.The precise control of Co atoms loading was achieved through precursor stoichiometry.Various physicochemical techniques were employed to analyze the morphology,element composition,and electronic state of the catalyst.Electrochemical investigations and theoretical calculations confirmed that the Pt_(1)Co_(3)Ru_(1)@NC/MWCNTs exhibit excellent electrocatalytic performance and durability for the process of MOR.The enhanced MOR activity can be attributed to the synergistic effect between the multiple elements resulting from precisely controlled Co loading content on surface of the electrocatalyst,which facilitates efficient charge transfer.This interaction between the multiple components also modifies the electronic structures of active sites,thereby promoting the conversion of intermediates and accelerating the MOR process.Thus,achieving precise control over Co loading in PtCoRu@NC/MWCNTs would enable the development of high-performance catalysts for DMFCs.
基金supported by the National Natural Science Foundation of China(Nos.82170426 and 22078193)Double Thousand Plan of Jiangxi Province(Nos.461654,jxsq2019102052).
文摘Electrocatalytic glucose oxidation reaction(GOR)has attracted much attention owing to its crucial role in biofuel cell fabrication.Herein,we load MoO_(3)nanoparticles on carbon nanotubes(CNTs)and use a discharge process to prepare a noblemetal-free MC-60 catalyst containing MoO_(3),Mo_(2)C,and a Mo_(2)C–MoO_(3)interface.In the GOR,MC-60 shows activity as high as 745μA/(mmol/L cm^(2)),considerably higher than those of the Pt/CNT(270μA/(mmol/L cm^(2)))and Au/CNT catalysts(110μA/(mmol/L cm^(2))).In the GOR,the response minimum on MC-60 is as low as 8μmol/L,with a steady-state response time of only 3 s.Moreover,MC-60 has superior stability and anti-interference ability to impurities in the GOR.The better performance of MC-60 in the GOR is attributed to the abundant Mo sites bonding to C and O atoms at the MoO_(3)–Mo_(2)C interface.These Mo sites create active sites for promoting glucose adsorption and oxidation,enhancing MC-60 performance in the GOR.Thus,these results help to fabricate more effi cient noble-metal-free catalysts for the fabrication of glucose-based biofuel cells.
基金supported by the National Natural Science Foundation of China (22262018)Young Science and Technology Fund in Gansu Province of China (21JR7RA252)+2 种基金Natural Research Fund of Gansu Province (20JR5RA441)Lanzhou Open Competition Mechanism,Merit Based Admission Project Major Fund (2021-JB-6)National Engineering&Fund for National Nickel and Cobalt Advanced Materials Engineering Research Center(GCZX2021JSKF001)。
文摘Interfacial engineering is a promising approach for enhancing electrochemical performance,but rich and efficient interfacial active sites remain a challenge in fabrication.Herein,RuO_(2)-PdO heterostructure nanowire networks(NWs) with rich interfaces and defects supported on carbon(RuO_(2)-PdO NWs/C) for alkaline hydrogen oxidation reaction(HOR) was formed by a seed induction-oriented attachment-thermal treatment method for the first time.As expected,the RuO_(2)-PdO NWs/C(72.8% Ru atomic content in metal) exhibits an excellent activity in alkaline HOR with a mass specific exchange current density(jo,m) of 1061 A gRuPd-1,which is 3.1 times of commercial Pt/C and better than most of the reported nonPt noble metal HOR electrocatalysts.Even at the high potential(~0.5 V vs.RHE) or the presence of CO(5 vol%),the RuO_(2)-PdO NWs/C still effectively catalyzes the alkaline HOR.Structure/electrochemical analysis and theoretical calculations reveal that the interfaces between RuO_(2) and PdO act as the active sites.The electronic interactions between the two species and the rich defects for the interfacial active sites weaken the adsorption of Had,also strengthen the adsorption of OHad,and accelerate the alkaline HOR process.Moreover,OHadon RuO_(2) can spillover to the interfaces,keeping the RuO_(2)-PdO NWs/C with the stable current density at higher potential and high resistance to CO poisoning.
基金the National R&D Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(Grant Nos.2021R1A3B10689202021M3H4A1A03049662)+1 种基金the Materials and Components Technology Development Program of MOTIE/KEIT(10080527)the Yonsei Signature Research Cluster Program of 2021(2021-22-0002)。
文摘Oxygen evolution reaction(OER)as a half-anodic reaction of water splitting hinders the overall reaction efficiency owing to its thermodynamic and kinetic limitations.Iodide oxidation reaction(IOR)with low thermodynamic barrier and rapid reaction kinetics is a promising alternative to the OER.Herein,we present a molybdenum disulfide(MoS_(2))electrocatalyst for a high-efficiency and remarkably durable anode enabling IOR.MoS_(2)nanosheets deposited on a porous carbon paper via atomic layer deposition show an IOR current density of 10 mA cm^(–2)at an anodic potential of 0.63 V with respect to the reversible hydrogen electrode owing to the porous substrate as well as the intrinsic iodide oxidation capability of MoS_(2)as confirmed by theoretical calculations.The lower positive potential applied to the MoS_(2)-based heterostructure during IOR electrocatalysis prevents deterioration of the active sites on MoS_(2),resulting in exceptional durability of 200 h.Subsequently,we fabricate a two-electrode system comprising a MoS_(2)anode for IOR combined with a commercial Pt@C catalyst cathode for hydrogen evolution reaction.Moreover,the photovoltaic–electrochemical hydrogen production device comprising this electrolyzer and a single perovskite photovoltaic cell shows a record-high current density of 21 mA cm^(–2)at 1 sun under unbiased conditions.
基金financially supported by the National Key Research and Development program of China(2018YFB1502302)the National Natural Science Foundation of China(21972107)+1 种基金the Natural Science Foundation of Hubei Province(2020CFA095)the Natural Science Foundation of Jiangsu Province(BK20191186)。
文摘The development of highly efficient electrocatalysts toward hydrogen oxidation reaction(HOR)under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cells(AEMFCs).However,the HOR kinetics in alkaline is two to three orders of magnitude slower than that in acid.More critically,fundamental understanding of the sluggish kinetics derived from the p H effect is still debatable.In this review,the recent development of understanding HOR mechanism and rational design of advanced HOR electrocatalysts are summarized.First,recent advances in the theories focusing on fundamental understandings of HOR under alkaline electrolyte are comprehensively discussed.Then,from the aspect of intermediates binding energy,optimizing hydrogen binding energy(HBE)and increasing hydroxyl binding energy(OHBE),the strategies for designing efficient alkaline HOR catalysts are summarized.At last,perspectives for the future research on alkaline HOR are pointed out.
基金financially supported by the National Natural Science Foundation of China (Grants no. 21376283, 21436003 and 21576032)
文摘This work demonstrates the outstanding performance of alloyed Au1 Pt1 nanoparticles on hydrogen oxidation reaction(HOR)in alkaline solution.Due to the weakened hydrogen binding energy caused by uniform incorporation of Au,the alloyed Au1Pt1/C nanoparticles exhibit superior HOR activity than commercial PtRu/C.On the contrary,the catalytic performance of the phase-segregated Au2Pt1/C and Au1Pt1/C bimetallic nanoparticles in HOR is significantly worse.Moreover,Au1Pt1/C shows a remarkable durability with activity dropping only 4% after 3000 CV cycles,while performance attenuation of commercial PtRu/C is high up to 15% under the same condition.Our results indicate that the alloyed Au1Pt1/C is a promising candidate to substitute commercial PtRu/C for hydrogen oxidation reaction in alkaline electrolyte.
基金supported by the Hainan Province Science and Technology Special Fund(ZDYF2020037,2020207)the National Natural Science Foundation of China(21805104,22109034,22109035,52164028,62105083)+3 种基金the Basic and Applied Basic Research Foundation of Guangdong Province(2019A1515110558)the Research Fund Program of Key Laboratory of Fuel Cell Technology of Guangdong Province(202021)the Innovative Research Projects for Graduate Students of Hainan Province(Qhys2021-134)the Start-up Research Foundation of Hainan University(KYQD(ZR)-20008,20082,20083,20084,21065,21124,21125)。
文摘Exploring effective, durable, and affordable electrocatalysts of methanol oxidation reaction(MOR) is of vital significance for the industrial application of direct methanol fuel cells. Herein, an efficient, general,and expandable method is developed to synthesis two-dimensional(2D) ternary Pt Bi M nanoplates(NPLs), in which various M(Co, Ni, Cu, Zn, Sn) is severed as the third component to the binary Pt Bi system. The MOR performance of Pt Bi M NPLs is entirely investigated, demonstrating that both the MOR activity and durability is enhanced with the introduction of the additional composition. Pt3Bi3Zn NPLs shows much higher MOR activity and stability than that of the Pt Bi counterparts, not to mention the current advanced Pt Ru/C and Pt/C catalysts. The prominent performances are attributed to the modulated electronic structure of the surface Pt in Pt Bi NPLs by the addition of Zn, resulting in a weakened affination between Pt and the adsorbed poisoning species(mainly CO) compared with Pt Bi NPLs, verified by density functional theory(DFT) calculations. In addition, the absorbed OH can be generated on the surface of Zn atom due to its favorable water activation properties, thus the CO removal on the adjacent Pt atoms is accelerated, further leading to a high activity and anti-poisoning performance of the resulting Pt_(3)Bi_(3)Zn catalyst. This work provides new insights and robust strategy for highly efficient MOR electrocatalyst with extraordinary anti-poisoning performance and stability.
基金financially supported by the Nation Natural Science Foundation of China(No.21475118)
文摘A hydrogen evolution-assisted one-pot aqueous approach was developed for facile synthesis of trimetallic Pd Ni Ru alloy nanochain-like networks(Pd Ni Ru NCNs) by only using KBH_4 as the reductant, without any specific additive(e.g. surfactant, polymer, template or seed). The products were mainly investigated by transmission electron microscopy(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The hierarchical architectures were formed by the oriented assembly growth and the diffusioncontrolled deposition in the presence of many in-situ generated hydrogen bubbles. The architectures had the largest electrochemically active surface area(ECSA) of 84.32 m^2 g^(–1) Pdthan Pd Ni nanoparticles(NPs,65.23 m^2 g^(–1) Pd), Pd Ru NPs(23.12 m^2 g^(–1) Pd), Ni Ru NPs(nearly zero), and commercial Pd black(6.01 m^2 g^(–1) Pd), outperforming the referenced catalysts regarding the catalytic characters for hydrazine oxygen reaction(HOR). The synthetic route provides new insight into the preparation of other trimetallic nanocatalysts in fuel cells.
基金financially supported by the National Natural Science Foundation of China (22109073, 22072067 and 21875112)the supports from National and Local Joint Engineering Research Center of Biomedical Functional Materialsa project sponsored by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘Urea oxidation reaction (UOR),which has favorable thermodynamic energy barriers compared with oxygen evolution reaction (OER),can provide more cost-effective electrons for the renewable energy systems,but is trapped by its sluggish UOR kinetics and intricate reaction intermediates formation/desorption process.Herein,we report a novel and effective electrocatalyst consisting of carbon cloth supported nitrogen vacancies-enriched Ce-doped Ni_(3)N hierarchical nanosheets (Ce-Ni_(3)N @CC) to optimize the flat-footed UOR kinetics,especially the stiff rate-determine CO_(2)desorption step of UOR.Upon the introduction of valance state variable Ce,the resultant nitrogen vacancies enriched Ce-Ni_(3)N @CC exhibits an enhanced UOR performance where the operation voltage requires only 1.31 V to deliver the current density of 10 mA cm^(-2),which is superior to that of Ni_(3)N @CC catalyst (1.36 V) and other counterparts.Density functional theory (DFT) results demonstrate that the incorporation of Ce in Ni_(3)N lowers the formation energy of nitrogen vacancies,resulting in rich nitrogen vacancies in Ce-Ni_(3)N @CC.Moreover,the nitrogen vacancies together with Ce doping optimize the local charge distribution around Ni sites,and balance the adsorption energy of CO_(2)in the rate-determining step (RDS),as well as affect the initial adsorption structure of urea,leading to the superior UOR catalytic performance of Ce-Ni_(3)N @CC.When integrating the Ce-Ni_(3)N catalyst in UOR//HER and UOR//CO_(2)R flow electrolyzer,both of them perform well with low operation voltage and robust long-term stability,proofing that the thermodynamically favorable UOR can act as a suitable substitute anodic reaction compared with that of OER.Our findings here not only provide a novel UOR catalyst but also offer a promising design strategy for the future development of energy-related devices.
基金supported by the National Natural Science Foundation of China(21722406,21975240,21676258)by the Fundamental Research Funds for the Central Universities(WK2060190102)+1 种基金by the Central Leading Local Science and Technology Development Special Fund Project(YDZX20191400002636)by the Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxi(STIP 2020L0695)。
文摘Noble metal-based electrocatalysts present high activities for methanol oxidation reaction(MOR),but are limited by their high cost,low stability and poor resistance to carbon monoxide(CO) poisoning.The development of active and stable non-noble metal electrocatalysts for MOR is desired,but remains a challenge.Herein,we report a simple strategy to make copper nanocrystal/nitrogen-doped carbon(Cu/N-C)monoliths,which can serve as active and robust electrodes for MOR.Copper nanocrystals were electrochemically deposited onto a conductive polyaniline hydrogel and calcined to form Cu/N-C monolith,where the active copper nanocrystals are protected by nitrogen-doped carbon.Owing to their extremely high electrical conductivity(1.25 × 10^(5) S cm^(-1)) and mechanical robustness,these Cu/N-C monoliths can be directly used as electrodes for MOR,without using substrates or additives.The optimal Cu/N-C(FT)@500 monolith shows a high MOR activity of 189 mA cm^(-2) at 0.6 V vs.SCE in alkaline methanol solution,superior to most of reported Cu-based MOR catalysts.Cu/N-C(FT)@500 also presents a better stability than Pt/C catalyst in the long-term MOR test at high current densities.Upon carbon monoxide(CO) poisoning,Cu/N-C(FT)@500 retains 96% of its MOR activity,far exceeding the performance of Pt/C catalyst(61% retention).Owing to its facile synthesis,outstanding activity,high stability and mechanical robustness,Cu/N-C(FT)@500 monolith is promising as a low-cost,efficient and CO-resistant electrocatalyst for MOR.
基金supported by the National Natural Science Foundation of China (Grant number 21622105 and 21931004)the Natural Science Foundation of Tianjin (Grant number 18JCJQJC47200)+2 种基金the Fundamental Research Funds for the Central UniversitiesNankai University (63201016 and 63201043)the Ministry of Education of China (Grant number B12015)。
文摘Two-dimensional coordination polymers(CPs) have aroused tremendous interest as electrocatalysts because the catalytic performance could be fine-tuned by their well-designed coordination layers with highly accessible and active metal sites.However,it remains great challenge for CP-based catalysts to be utilized for electrocatalytic oxidation reactions due to their inefficient activities and low catalytic stabilities.Herein,we applied a mixed-metal strategy to fabricate two-dimensional Co_xNi_(1-x)-CPs with dual active sites for electrocatalytic water and urea oxidation.By metal ratio regulation in the twodimensional layer,an optimized Co_(2/3)Ni_(1/3)-CP exhibits a water oxidation performance with an overpotential of 325 mV at a current density of 10 mA cm^(-2) and a Tafel slope of 86 mV dec^(-1) in alkaline solution for oxygen evolution reaction.Importantly,a lower potential than that of commercial RuO_(2) is observed over20 mA cm^(-2).Co_(2/3)Ni_(1/3)-CP also displays a potential of 1.381 V at 10 mA cm^(-2) for urea oxidation reaction and a Tafel slope of 124 mV dec^(-1).This mixed-metal strategy to maximize synergistic effect of different metal centers may ultimately lead to promising electrocatalysts for small molecule oxidation reaction.
基金the Ministry of Education,Science and Technological Development of Republic of Serbia for support within project no.451–03–68/2020–14/200146Funda??o para a Ciência e a Tecnologia(FCT,Portugal)for contract no.IF/01084/2014/CP1214/CT0003 under IF2014 Programme(D.M.F.Santos)and no.IST-ID/156–2018(B.?ljuki?)+1 种基金sponsored in part by the NATO Science for Peace and Security Programme under grant G5729(I.A.Pa?ti and B.?ljuki?)the support from the Carl Tryggers Foundation for Scientific Research(grant no.18:177)。
文摘Problems associated with carbon support corrosion under operating fuel cell conditions require the identification of alternative supports for platinum-based nanosized electrocatalysts.Platinum supported on manganese vanadate(Pt/MnV_(2)O_(6))was prepared by microwave irradiation method and characterized using X-ray diffraction,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,scanning electron microscopy with energy dispersive spectroscopy,and transmission electron microscopy.The borohydride oxidation reaction(BOR)on Pt/MnV_(2)O_(6) was studied in highly alkaline media using voltammetry,chronoamperometry,and electrochemical impedance spectroscopy.BOR electrocatalytic activity of Pt/MnV_(2)O_(6) was also compared with that of commercial Pt/C(46 wt%Pt)electrocatalyst.The apparent activation energy of BOR at Pt/MnV_(2)O_(6) was estimated to be 32 k J mol^(-1) and the order of reaction to be 0.51,indicating that borohydride hydrolysis proceeds in parallel with its oxidation.Long-term stability of Pt/MnV_(2)O_(6) under BOR typical conditions was observed.A laboratory-scale direct borohydride fuel cell assembled with a Pt/MnV_(2)O_(6) anode reached a specific power of 274 W g^(-1).Experimental results on Pt/MnV_(2)O_(6) were complemented by DFT calculations,which indicated good adherence of Pt to MnV_(2)O_(6),beneficial for electrocatalyst stability.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.118740271 and 1774124)Technology Development Program of Jilin Province,China(Grant No.20180101285JC)the China Postdoctoral Science Foundation(Grant Nos.2019T120233 and 2017M621198)
文摘Methanol fuel cells have been intensively developed as clean and high-efficiency energy conversion system due to their high efficiency and low emission of pollutants.Here,we developed a simple aqueous synthetic method to prepare bimetallic PdAu nanoflowers catalysts for methanol oxidation reaction(MOR)in alkaline environment.Their composition can be directly tuned by changing the ratio between Pd and Au precursors.Compared with commercial Pd/C catalyst,all of the PdAu nanoflowers catalysts show the enhanced catalytic activity and durability.In particular,the PdAu nanoflowers specific activity reached 0.72 mA/cm^(2),which is 14 times that of commercial Pd/C catalyst.The superior MOR activity could be attributed to the unique porous structure and the shift of the d-band center of Pd.
文摘Rhodium nanoparticle-loaded carbon black (Rh/CB) was prepared by a wet method, and its activity and durability for glycerol oxidation reaction (GOR) in alkaline medium were compared with Pt, Pd and Au nanoparticle-loaded CB (Pt/CB, Pd/CB and Au/CB). In the cyclic voltammogram of the Rh/CB electrode, the redox waves due to hydrogen adsorption/desorption and the surface OH monolayer formation/reduction were observed at more negative potentials than the Pt/CB and Pd/CB electrodes. The onset and peak potentials of the GOR current densities for the Rh/CB electrode were ca. –0.55 and –0.30 V vs. Hg/HgO, respectively, which were 0.10 and 0.20 V more negative than the Pt/CB electrode whose GOR activity was the best, indicating that Rh was a fascinating metal for reducing the overpotential for GOR. In the electrostatic electrolysis with the Rh/CB and Pt/CB electrodes, the decrease in the GOR current density in the former with time was suppressed compared to that in the latter, suggesting that the tolerance to poisoning for the Rh/CB electrode was superior to that for the Pt/CB electrode.
文摘To improve the activity for glycerol oxidation reaction (GOR) of Pt, PtAg (mole ratio of Pt/Ag = 3 and 1) alloy nanoparticle-loaded carbon black (Pt/CB, PtAg(3:1)/CB, PtAg(1:1)/CB) catalysts were prepared by a wet method. The resultant catalysts, moreover, were heat-treated in a N2 atmosphere at 200°C. The alloying of Pt with Ag for each PtAg/CB was confirmed by X-ray diffractometry and electron dispersive X-ray spectrometry. The heat-treatment did not change the crystal structure of the PtAg alloys and increased their particle size. X-ray photoelectron spectroscopy exhibited that stabilizers were completely removed from the PtAg alloy surface, and the Pt4f and Ag3d doublets due to metallic Pt and Ag, respectively, shifted to lower binding energies, supporting the alloying of Pt with Ag. Both PtAg/CB electrodes had two oxidation waves of glycerol irrespective of heat-treatment, which was different from the Pt/CB electrode. The onset potential of the first oxidation wave was -0.60 V, which was 0.20 V less positive than that for the Pt/CB electrode, indicating the alloying of Pt with Ag greatly improved the GOR activity of Pt. The heat-treated PtAg(3:1)/ CB electrode improved the GOR current density of the second oxidation peak. In the potentiostatic electrolysis at -0.1 and 0 V for both PtAg/CB electrodes, the ratio of oxidation current density at 60 min to that at 5 min (j<sub>60</sub>/j<sub>5</sub>), an indicator of the catalyst deterioration, at 0 V was higher than that at -0.1 V, because the adsorbed oxidation intermediates were greatly consumed at the larger overpotential. The heat-treatment of the PtAg(3:1)/CB electrode increased the j60</sub>/j5</sub> value at -0.1 V but decreased that at 0 V. This could be attributed to the formation of high-order oxidation intermediates which might have stronger poisoning effect.
基金supported by the National Natural Science Foundation of China(No.22162004)the Natural Science Foundation of Guangxi Province(No.2022JJD120011)the Opening Project of Guangxi Key Laboratory of Information Materials(No.211025-K).
文摘It is still a lack of bifunctional catalysts for ammonia oxidation reaction(AOR)and hydrogen evolution reaction(HER)due to their different reaction mechanisms.In this work,P is doped into PtZn alloy by calcination with NaH_(2)PO_(2) as P source to induce the lattice tensile strain of Pt and the electronic interaction between P and Zn,which optimizes the AOR and HER activity simultaneously.The sample with the optimal P content can drive the AOR peak current density of 293.6 mA·mgPt^(-1),which is almost 2.7 times of Pt.For HER,the overpotential at^(-1)0 mA·cm^(-2) is only 23 mV with Tafel slope of 34.1 mV·dec^(-1).Furthermore,only 0.59 V is needed to obtain 50 mA·mgPt^(-1) for ammonia electrolysis under a two-electrode system.Therefore,this work shows an ingenious method to design bifunctional catalysts for ammonia electrolysis.
基金support of this research by the National Natural Science Foundation of China(Nos.22179034 and 22279030)the Natural Science Foundation of Heilongjiang Province(No.ZD2023B002).
文摘To achieve the goals of the peak carbon dioxide emissions and carbon neutral,the development and utilization of sustainable clean energy are extremely important.Hydrogen fuel cells are an important system for converting hydrogen energy into electrical energy.However,the slow hydrogen oxidation reaction(HOR)kinetics under alkaline conditions has limited its development.Therefore,elucidating the catalytic mechanism of HOR in acidic and alkaline media is of great significance for the construction of highly active and stable catalysts.In terms of practicality,Pt is still the primary choice for commercialization of fuel cells.On the above basis,we first introduced the hydrogen binding energy theory and bifunctional theory used to describe the HOR activity,as well as the pH dependence.After that,the rational design strategies of Pt-based HOR catalysts were systematically classified and summarized from the perspective of activity descriptors.In addition,we further emphasized the importance of theoretical simulations and in situ characterization in revealing the HOR mechanism,which is crucial for the rational design of catalysts.Moreover,the practical application of Pt-based HOR catalysts in fuel cells was also presented.In closing,the current challenges and future development directions of HOR catalysts were discussed.This review will provide a deep understanding for exploring the mechanism of highly efficient HOR catalysts and the development of fuel cells.
基金supported by the National Natural Science Foundation of China(Nos.52025013 and 22121005)the 111 Project(No.B12015),Haihe Laboratory of Sustainable Chemical Transformations,and the Fundamental Research Funds for the Central Universities.
文摘The overall energy efficiency of electrochemical systems is severely hindered by the traditional anodic oxygen evolution reaction(OER).Utilizing urea oxidation reaction(UOR)with lower thermodynamic potential to replace OER provides a promising strategy to enhance the energy efficiency.Amorphous and heterojunctions electrocatalysts have been aroused extensive studies owing to their unique physicochemical properties and outperformed activity.Herein,we report a simple method to construct a novel crystalline-amorphous NiO-CrO_(x)heterojunction grown on Ni foam for UOR electrocatalyst.The NiO-CrO_(x)electrocatalyst displays excellent UOR performance with an ultralow working potential of 1.32 V at 10 mA·cm^(−2)and ultra-long stability about 5 days even at 100 mA·cm^(−2).In-situ Raman analysis and temperature-programmed desorption(TPD)measurement verify that the presence of the amorphous CrO_(x)phase can boost the reconstruction from NiO to active NiOOH species and enhance adsorption ability of urea molecule.Besides,the unique crystalline-amorphous interfaces are also benefit to improving the UOR performance.
基金This work was supported by the National Natural Science Foundation of China(Nos.52171051,52130103,52271237,52271163,51971026,12034002,and 11904025)the Natural Science Foundation of Henan province(No.222300420086).We thank Dr.Song Hong from the Electron Microscopy Laboratory at Beijing University of Chemical Technology for the help with the aberration-corrected transmission electron microscope.
文摘Morphology engineering has been developed as one of the most widely used strategies for improving the performance of electrocatalysts.However,the harsh reaction conditions and cumbersome reaction steps during the nanomaterials synthesis still limit their industrial applications.Herein,one-dimensional(1D)novel-segmented PtTe porous nanochains(PNCs)were successfully synthesized by the template methods assisted by Pt autocatalytic reduction.The PtTe PNCs consist of consecutive mesoporous architectures that provide a large electrochemical surface area(ECSA)and abundant active sites to enhance methanol oxidation reaction(MOR).Furthermore,1D nanostructure as a robust sustaining frame can maintain a high mass/charge transfer rate in a long-term durability test.After 2,000 cyclic voltammetry(CV)cycles,the ECSA value of PtTe PNCs remained as high as 44.47 m^(2)·gPt^(-1),which was much larger than that of commercial Pt/C(3.95 m^(2)·gPt^(-1)).The high catalytic activity and durability of PtTe PNCs are also supported by CO stripping test and density functional theory calculation.This autocatalytic reduction-assisted synthesis provides new insights for designing efficient low-dimensional nanocatalysts.
基金supported in part by grants from the National Key Research and Development Program of China(2022YFC2303100)the National Natural Science Foundation of China(22193070,32030002,81974495 and 21977109)the Innovative Research Team of High-Level Local Universities in Shanghai(SHSMU-ZLCX20212401).
文摘Cytochrome P450 enzymes (P450s) belong to a large family of oxidative hemeproteins and catalyze highly diverse oxygenation reactions that are involved in the biosynthesis of various natural products. Here, we report a multifunctional cytochrome P450 enzyme, PyrE2, which catalyzes the regioselective, successive 6-electron oxidation of an inert methyl group to produce a carboxyl product through formation of the hydroxyl and aldehyde intermediates in pyrroindomycin biosynthesis. The time-course biotransformation was characterized by the presence of the hydroxyl and aldehyde intermediates, the lag of the formation of the carboxyl product, and the subsequent loss of both intermediates, indicating that each 2-electron oxidation exhibits the distributive mechanism that requires substrate binding and product releasing. Bioinformatics analysis shows that the homologs of pyrE2 are common in the gene clusters of the spirotetronates varying in the oxidative state of the corresponding exocyclic carbon, indicating the generality and diversity of P450-catalyzed oxygenation in related biosynthetic pathways.
