Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utiliz...Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.展开更多
Developing cost-effective,robust and stable non-precious metal catalysts for oxygen reduction reaction(ORR) is of paramount importance for electrochemical energy conversion devices such as fuel cells and metal-air bat...Developing cost-effective,robust and stable non-precious metal catalysts for oxygen reduction reaction(ORR) is of paramount importance for electrochemical energy conversion devices such as fuel cells and metal-air batteries.Although Fe-N-C single atom catalysts(SACs) have been hailed as the most promising candidate due to the optimal binding strength of ORR intermediates on the Fe-N_(4) sites,they suffer from serious mass transport limitations as microporous templates/substrates,i.e.,zeolitic imidazolate frameworks(ZIFs),are usually employed to host the active sites.Motivated by this challenge,we herein develop a hydrogen-bonded organic framework(HOF)-assisted pyrolysis strategy to construct hierarchical micro/mesoporous carbon nanoplates for the deposition of atomically dispersed Fe-N_(4) sites.Such a design is accomplished by employing HOF nanoplates assembled from 2-aminoterephthalic acid(NH_(2)-BDC) and p-phenylenediamine(PDA) as both soft templates and C,N precursors.Benefitting from the structural merits inherited from HOF templates,the optimized catalyst(denoted as Fe-N-C SAC-950) displays outstanding ORR activity with a high half-wave potential of 0.895 V(vs.reversible hydrogen electrode(RHE)) and a small overpotential of 356 mV at 10 mA cm^(-2) for the oxygen evolution reaction(OER).More excitingly,its application potential is further verified by delivering superb rechargeability and cycling stability with a nearly unfading charge-discharge gap of 0.72 V after 160 h.Molecular dynamics(MD) simulations reveal that micro/mesoporous structure is conducive to the rapid mass transfer of O_(2),thus enhancing the ORR performance.In situ Raman results further indicate that the conversion of O_(2) to~*O_(2)-the rate-determining step(RDS) for Fe-N-C SAC-950.This work will provide a versatile strategy to construct single atom catalysts with desirable catalytic properties.展开更多
Developing high performance and low-cost catalysts for oxygen reduction reaction(ORR)in challenging acid condition is vital for proton-exchange-membrane fuel cells(PEMFCs).Carbon-supported nonprecious metal single ato...Developing high performance and low-cost catalysts for oxygen reduction reaction(ORR)in challenging acid condition is vital for proton-exchange-membrane fuel cells(PEMFCs).Carbon-supported nonprecious metal single atom catalysts(SACs)have been identified as potential catalysts in the field.Great advance has been obtained in constructing diverse active sites of SACs for improving the performance and understanding the fundamental principles of regulating acid ORR performance.However,the ORR performance of SACs is still unsatisfactory.Importantly,microenvironment adjustment of SACs offers chance to promote the performance of acid ORR.In this review,acid ORR mechanism,attenuation mechanism and performance improvement strategies of SACs are presented.The strategies for promoting ORR activity of SACs include the adjustment of center metal and its microenvironment.The relationship of ORR performance and structure is discussed with the help of advanced experimental investigations and theoretical calculations,which will offer helpful direction for designing advanced SACs for ORR.展开更多
Studies have extensively addressed the development of electrocatalytic technologies for energy storage and conversion,fuel production,and environmental protection.Electrode processes such as different oxidation and re...Studies have extensively addressed the development of electrocatalytic technologies for energy storage and conversion,fuel production,and environmental protection.Electrode processes such as different oxidation and reduction reactions play a vital and significant role in these technologies.In this regard,efficient,inexpensive,and stable electrocatalysts capable can significantly promote electrochemical reactions.Unique features of metal–organic frameworks(MOFs)such as their high porosity,tunable structure,size,and pore shape,high surface area,and redox properties have introduced them as an ideal electrocatalyst candidate.This review is thus aimed at elucidating the role of MOF-based materials(pristine,derivatives and composites)as efficient electrocatalysts in energy and sensing-related oxidation and reduction reactions such as oxygen reduction reaction(ORR),hydrogen oxidation reaction(HOR),carbon dioxide reduction reaction(CO_(2)RR),urea oxidation reaction(UOR),alcohol oxidation reaction(AOR),nitrogen reduction reaction(NRR),and glucose oxidation reaction(GOR)in advanced energy and sensing devices.Also,the structure–property relationship of the electrocatalyst was elaborated for each electrocatalytic reaction.Finally,perspectives on the potential research topics for practical use of MOF-based electrocatalysts are addressed.The present review can improve the interest in MOF-based electrocatalysts to study different oxidation and reduction reactions in energy and sensing systems.展开更多
Developing highly efficient and stable platinum-based electrocatalyst for oxygen reduction reaction(ORR) is critical to expediting commercialization of fuel cells.Herein,several PtCu alloy nanocatalysts supported on N...Developing highly efficient and stable platinum-based electrocatalyst for oxygen reduction reaction(ORR) is critical to expediting commercialization of fuel cells.Herein,several PtCu alloy nanocatalysts supported on N,P co-doped carbon(PtCu/NPC) were prepared by microbial-sorption and carbonization-reduction.Among them,PtCu/NPC-700 ℃ exhibits excellent catalytic performance for ORR with a mass activity of 0.895 A mg_(pt)^(-1)(@0.9 V) which is 8.29 folds of commercial Pt/C.Additionally,the ECSA and MA of PtCu/NPC-700℃ only decrease by 14.2% and 18.7% respectively,while Pt/C decreases by 35.2% and 52.8% after 10,000 cycles of ADT test.Moreover,the PtCu/NPC-700℃ catalyst emanates a maximum power density of 715 mW cm^(-2) and only 11.1% loss of maximum power density after 10,000 ADTs in single-cell test,indicating PtCu/NPC-700℃ also manifests higher activity and durability in actual single-cell operation than Pt/C.This research provides an easy and novel strategy for developing highly active and durable Pt-based alloy catalyst.展开更多
Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(...Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.展开更多
Fe single-atom catalysts(Fe-SACs)have been extensively studied as a highly efficient electrocatalyst toward the oxygen reduction reaction(ORR).Nonetheless,they suffer from stability issue induced by dissolution of Fe ...Fe single-atom catalysts(Fe-SACs)have been extensively studied as a highly efficient electrocatalyst toward the oxygen reduction reaction(ORR).Nonetheless,they suffer from stability issue induced by dissolution of Fe metal center and the OH^(−)blocking.Herein,a surface molecular engineering strategy is developed by usingβ-cyclodextrins(CDs)as a localized molecular encapsulation.The CD-modified Fe-SAC(Fe-SNC-β-CD)shows obviously improved activity toward the ORR with 0.90 V,4.10 and 4.09 mA cm^(-2)for E_(1/2),J_(0)and Jk0.9,respectively.Meanwhile,the Fe-SNC-β-CD shows the excellent long-term stability against aggressive stress and the poisoning.It is confirmed through electrochemical investigation that modification ofβ-CD can,on one hand,regulate the atomic Fe coordination chemistry through the interaction between the CD and FeN_(x) moiety,while on the other mitigate the strong adsorption of OH^(−)and function as protective barrier against the poisoning molecules leading to enhanced ORR activity and stability for the Fe-SACs.The molecular encapsulation strategy demonstrates the uniqueness of post-pyrolysis surface molecular engineering for the design of single-atom catalyst.展开更多
Oxygen reduction reaction(ORR)is the heart of many new energy conversions and storage devices,such as metal-air batteries and fuel cells.However,ORR is currently facing the dilemma of sluggish intrinsic kinetics and t...Oxygen reduction reaction(ORR)is the heart of many new energy conversions and storage devices,such as metal-air batteries and fuel cells.However,ORR is currently facing the dilemma of sluggish intrinsic kinetics and the noble electrocatalysts of high price and low reserves.In this work,isolated Co atoms anchored on defective nitrogen-doped carbon graphene single-atom catalyst(Co-SAC/NC)are synthesized via the proposed movable type printing method.The prepared Co-SAC/NC catalyst demonstrates admirable ORR performance,with a high half-wave potential of 0.884 V in alkaline electrolytes and outstanding durability.In addition,an assembled zinc–air battery with prepared Co-SAC/NC as air-cathode catalyst displays a high-peak power density of 179 mW cm^(-2)and a high-specific capacity(757 mAh g^(-1)).Density functional theory calculations confirm that the true active sites of the prepared catalyst are Co-N_(4)moieties,and further reveal a significantly electronic structure evolution of Co sites in the ORR process,in which the project density of states and local magnetic moment of Co atom varies during its whole reaction process.This work not only paves a new avenue for synthesizing SACs as robust electrocatalysts,but also provides an electronic-level insight into the evolution of the electronic structure of single-atom catalysts.展开更多
One of the primary challenges in relation to phosphoric acid fuel cells is catalyst poisoning by phosphate anions that occurs at the interface between metal nanoparticles and the electrolyte.The strong adsorption of p...One of the primary challenges in relation to phosphoric acid fuel cells is catalyst poisoning by phosphate anions that occurs at the interface between metal nanoparticles and the electrolyte.The strong adsorption of phosphate anions on the catalyst surface limits the active sites for the oxygen reduction reaction(ORR),significantly deteriorating fuel cell performance.Here,antipoisoning catalysts consisting of Pt-based nanoparticles encapsulated in an ultrathin carbon shell that can be used as a molecular sieve layer are rationally designed.The pore structure of the carbon shells is systematically regulated at the atomic level by high-temperature gas treatment,allowing O_(2) molecules to selectively react on the active sites of the metal nanoparticles through the molecular sieves.Besides,the carbon shell,as a protective layer,effectively prevents metal dissolution from the catalyst during a long-term operation.Consequently,the defect-controlled carbon shell leads to outstanding ORR activity and durability of the hybrid catalyst even in phosphoric acid electrolytes.展开更多
Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overco...Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.展开更多
The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are u...The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are urgently required.Transition metal oxides such as CoO_(x),FeO_(x),and NiO_(x)are low-cost,low toxicity,and abundant materials for a wide range of electrochemical reactions,but are almost inert for CO_(2)RR.Here,we report for the first time that nitrogen doped carbon nanotubes(N-CNT)have a surprising activation effect on the activity and selectivity of transition metal-oxide(MO_(x)where M=Fe,Ni,and Co)nanoclusters for CO_(2)RR.MO_(x)supported on N-CNT,MO_(x)/N-CNT,achieves a CO yield of 2.6–2.8 mmol cm−2 min−1 at an overpotential of−0.55 V,which is two orders of magnitude higher than MO_(x)supported on acid treated CNTs(MO_(x)/O-CNT)and four times higher than pristine N-CNT.The faraday efficiency for electrochemical CO_(2)-to-CO conversion is as high as 90.3%at overpotential of 0.44 V.Both in-situ XAS measurements and DFT calculations disclose that MO_(x)nanoclusters can be hydrated in CO_(2)saturated KHCO_(3),and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions,which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.展开更多
Pd-based nanocatalyst is a potential oxygen reduction oxidation(ORR)catalyst because of its high activity in alkaline medium and low cost.In this work,bimetallic Pd Au nanocatalysts are prepared by one-pot hydrotherma...Pd-based nanocatalyst is a potential oxygen reduction oxidation(ORR)catalyst because of its high activity in alkaline medium and low cost.In this work,bimetallic Pd Au nanocatalysts are prepared by one-pot hydrothermal method using triblock pluronic copolymers,poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)(PEO19-PPO69-PEO19)(P123)as reducer and stabilizer,and heat-treatment method is applied to regulate catalyst structure and improve catalyst activity.The results show that the heat treatment can agglomerate the catalyst to a certain extent,but effectively improve the crystallinity and alloying degree of the catalyst.The ORR performance of the Pd Au nanocatalysts obtained under different heat treatment conditions is systematically investigated.Compared with commercial Pd black and Pd Au catalyst before heat treatment,the ORR performance of Au Pd nanocatalyst obtained after heat treatment for one hour at 500℃ has been enhanced.The Pd Au nanocatalysts after heat treatment also display enhanced anti-methanol toxicity ability in acidic medium.展开更多
Single-atom catalysts(SACs) with nitrogen-coordinated nonprecious metal sites have exhibited inimitable advantages in electrocatalysis.However,a large room for improving their activity and durability remains.Herein,we...Single-atom catalysts(SACs) with nitrogen-coordinated nonprecious metal sites have exhibited inimitable advantages in electrocatalysis.However,a large room for improving their activity and durability remains.Herein,we construct atomically dispersed Fe sites in N-doped carbon supports by secondary-atom-doped strategy.Upon the secondary doping,the density and coordination environment of active sites can be efficiently tuned,enabling the simultaneous improvement in the number and reactivity of the active site.Besides,structure optimizations in terms of the enlarged surface area and improved hydrophilicity can be achieved simultaneously.Due to the beneficial microstructure and abundant highly active FeN_5 moieties resulting from the secondary doping,the resultant catalyst exhibits an admirable half-wave potential of 0.81 V versus 0.83 V for Pt/C and much better stability than Pt/C in acidic media.This work would offer a general strategy for the design and preparation of highly active SACs for electrochemical energy devices.展开更多
Metal-air batteries face a great challenge in developing efficient and durable low-cost oxygen reduction reaction(ORR)electrocatalysts.Single-atom iron catalysts embedded into nitrogen doped carbon(Fe-N-C)have emerged...Metal-air batteries face a great challenge in developing efficient and durable low-cost oxygen reduction reaction(ORR)electrocatalysts.Single-atom iron catalysts embedded into nitrogen doped carbon(Fe-N-C)have emerged as attractive materials for potential replacement of Pt in ORR,but their catalytic performance was limited by the symmetrical electronic structure distribution around the single-atom Fe site.Here,we report our findings in significantly enhancing the ORR performance of Fe-N-C by moderate Fe_(2)O_(3) integration via the strong electronic interaction.Remarkably,the optimized catalyst(M-Fe_(2)O_(3)/Fe_(SA)@NC)exhibits excellent activity,durability and good tolerance to methanol,outperforming the benchmark Pt/C catalyst.When M-Fe_(2)O_(3)/Fe_(SA)@NC catalyst was used in a practical zinc-air battery assembly,peak power density of 155 mW cm^(-2)and specific capacity of 762 mA h g_(Zn)^(-1)were achieved and the battery assembly has shown superior cycling stability over a period of 200 h.More importantly,theoretical studies suggest that the introduction of Fe_(2)O_(3) can evoke the crystal field alteration and electron redistribution on single Fe atoms,which can break the symmetric charge distribution of Fe-N_(4) and thereby optimize the corresponding adsorption energy of intermediates to promote the O_(2)reduction.This study provides a new pathway to promote the catalytic performance of single-atom catalysts.展开更多
Carbon supported gold-iridium composite(Au Ir/C) was synthesized by a facile one-step process and was investigated as the bifunctional catalyst for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER). Th...Carbon supported gold-iridium composite(Au Ir/C) was synthesized by a facile one-step process and was investigated as the bifunctional catalyst for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER). The physical properties of the Au Ir/C composite were characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). Although the Au and Ir in the Au Ir/C did not form alloy, it is clear that the introduction of Ir decreases the average Au particle size to 4.2 nm compared to that in the Au/C(10.1 nm). By systematical analysis on chemical state of metal surface via XPS and the electrochemical results, it was found that the Au surface for the Au/C can be activated by potential cycling from 0.12 V to 1.72 V, resulting in the increased surface roughness of Au,thus improving the ORR activity. By the same potential cycling, the Ir surface of the Ir/C was irreversibly oxidized, leading to degraded ORR activity but uninfluenced OER activity. For the Au Ir/C, Ir protects Au against being oxidized due to the lower electronegativity of Ir. Combining the advantages of Au and Ir in catalyzing ORR and OER, the Au Ir/C catalyst displays an enhanced catalytic activity to the ORR and a comparable OER activity. In the 50-cycle accelerated aging test for the ORR and OER, the Au Ir/C displayed a satisfied stability, suggesting that the Au Ir/C catalyst is a potential bifunctional catalyst for the oxygen electrode.展开更多
The research on electrocatalysts with relatively lower price than Pt and excellent electrocatalytic performance for the cathode oxygen reduction reaction(ORR) and anode methanol oxidation reaction(MOR) is vital for th...The research on electrocatalysts with relatively lower price than Pt and excellent electrocatalytic performance for the cathode oxygen reduction reaction(ORR) and anode methanol oxidation reaction(MOR) is vital for the development of direct methanol fuel cells(DMFCs). In this work, we develop a cyanogel-reduction method to synthesize reduced graphene oxide(rGO) supported highly dispersed PdNi alloy nanocrystals(PdNi/rGO) with high alloying degree and tunable Pd/Ni ratio. The large specific surface area and the d-band center downshift of Pd result in excellent activity of Pd4 Ni1/rGO nanohybrids for the ORR. The modification of Pd electronic structure can facilitate the adsorption of CH3 OH on Pd surface and the highly oxophilic property of Ni can eliminate/mitigate the COadsintermediates poisoning, which make PdNi/r GO nanohybrids possess superior MOR activity. In addition, rGO improve the stability of PdNi alloy nanocrystals for the ORR and MOR. Due to high activity and stability for the ORR and MOR, PdNi/rGO nanohybrids are promising to be an available bifunctional electrocatalyst in DMFCs.展开更多
Developing efficient electrocatalysts for converting dinitrogen to ammonia through electrocatalysis is of significance to the decentralized ammonia production. Here, through high-throughput density functional theory c...Developing efficient electrocatalysts for converting dinitrogen to ammonia through electrocatalysis is of significance to the decentralized ammonia production. Here, through high-throughput density functional theory calculations, we demonstrated that the interfacial modulation of hexagonal boron nitride/graphene(hBN-graphene) could sufficiently improve the catalytic activity of the single transition metal atom catalysts for nitrogen reduction reaction(NRR). It was revealed that Re@hBN-graphene and Os@hBN-graphene possessed remarkable NRR catalytic activity with low limiting potentials of 0.29 V and 0.33 V, respectively. Furthermore, the mechanism of the enhanced catalytic activity was investigated based on various descriptors of the adsorption energies of intermediates, where the synergistic effect of hBN and graphene in the hybrid substrate was found to play a key role. Motivated by the synergistic effect of hybrid substrate in single-atom catalysts, a novel strategy was proposed to efficiently design dual-atom catalysts by integrating the merits of both metal components. The as-designed dual-atom catalyst Fe-Mo@hBN exhibited more excellent NRR catalytic performance with a limiting potential of 0.17 V, manifesting the solidity of the design strategy. Our findings open new avenues for the search of heterostructure substrates for single-atom catalysts and the efficient design of dualatom catalysts for NRR.展开更多
The growth of electrochemically inert segregation layers on the surface of solid oxide fuel cell cathodes has become a bottleneck restricting the development of perovskite-structured oxygen reduction catalysts.Here,we...The growth of electrochemically inert segregation layers on the surface of solid oxide fuel cell cathodes has become a bottleneck restricting the development of perovskite-structured oxygen reduction catalysts.Here,we report a new discovery in which enriched Ba and Fe ions on the near-surface of Nd_(1/2)Ba_(1/2)Co_(1/3)Fe_(1/3)Mn_(1/3)O_(3-δ)spontaneously agglomerate into dispersed Ba_(5)Fe_(2)O_(8) nanoparticles and maintain a highly active and durable perovskite structure on the surface.This unique surface selfcleaning phenomenon is related to the low average potential energy of Ba_(5)Fe_(2)O_(8),which is grown on the near-surface layer.The electrochemically inert Ba_(5)Fe_(2)O_(8) segregation layer on the near-surface of the perovskite catalyst achieves self-cleaning by regulating the formation energy of enriched metal oxides.This self-cleaned perovskite surface exhibits an ultrafast oxygen exchange rate,high catalytic activity for the oxygen reduction reaction,and good adaptability to the actual working conditions of solid oxide fuel cell stacks.This study paves a new way for overcoming the stubborn problem of perovskite catalyst surface deactivation and enriches the scientific knowledge of surface catalysis.展开更多
CO_(x)(x=1,2)and O_(2) chemistry play key roles in tackling global severe environmental challenges and energy issues.To date,the efficient selective electrocatalytic transformations of COx-carbon chemicals,and O_(2)-h...CO_(x)(x=1,2)and O_(2) chemistry play key roles in tackling global severe environmental challenges and energy issues.To date,the efficient selective electrocatalytic transformations of COx-carbon chemicals,and O_(2)-hydrogenated products are still huge challenges.Single-atom catalysts(SACs)as atomic-scale novel catalysts in which only isolated metal atoms are dispersed on supports shed new insights in overcome these obstacles in CO_(x) and O_(2) chemistry,including CO oxidation,CO_(2) reduction reaction(CO_(2)RR),oxygen reduction reaction(ORR),and oxygen evolution reaction(OER).In this review,the unique features and advanced synthesis strategies of SACs from a viewpoint of fundamental synthesis design are first highlighted to guide future strategy design for controllable SAC synthesis.Then,the to-date reported CO_(2)RR,CO oxidation,OER,and ORR mechanism are included and summarized.More importantly,the design principles and design strategies of improving the intrinsic activity,selectivity,and stability are extensively discussed and the engineering strategy is classified as neighbor coordination engineering,metal-atom engineering,and substrate engineering.Via the comprehensive review and summary of state-of-the-art SACs,the synthesis–structure–property–mechanism–design principle relation can be revealed to shed lights into the structural construction of SACs.Finally,we present an outlook on current challenges and future directions for SACs in CO_(x) and O_(2) chemistry.展开更多
Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Here...Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1) at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1) and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.展开更多
基金supported by the National Natural Science Foundation of China(22234005,21974070)the Natural Science Foundation of Jiangsu Province(BK20222015)。
文摘Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.
基金financially supported by the National Key R&D Program of China(2022YFB4004100)the National Natural Science Foundation of China(22272161)+6 种基金the Jilin Province Science and Technology Development Program(20230101367JC)financially supported by the National Natural Science Foundation of China(22073094)the Science and Technology Development Program of Jilin Province(20210402059GH)the Science and Technology Plan Projects of Yunnan Province(202101BC070001–007)the Major Science and Technology Projects for Independent Innovation of China FAW Group Co.,Ltd(20220301018GX)the essential support of the Network and Computing Center,CIAC,CASthe Computing Center of Jilin Province。
文摘Developing cost-effective,robust and stable non-precious metal catalysts for oxygen reduction reaction(ORR) is of paramount importance for electrochemical energy conversion devices such as fuel cells and metal-air batteries.Although Fe-N-C single atom catalysts(SACs) have been hailed as the most promising candidate due to the optimal binding strength of ORR intermediates on the Fe-N_(4) sites,they suffer from serious mass transport limitations as microporous templates/substrates,i.e.,zeolitic imidazolate frameworks(ZIFs),are usually employed to host the active sites.Motivated by this challenge,we herein develop a hydrogen-bonded organic framework(HOF)-assisted pyrolysis strategy to construct hierarchical micro/mesoporous carbon nanoplates for the deposition of atomically dispersed Fe-N_(4) sites.Such a design is accomplished by employing HOF nanoplates assembled from 2-aminoterephthalic acid(NH_(2)-BDC) and p-phenylenediamine(PDA) as both soft templates and C,N precursors.Benefitting from the structural merits inherited from HOF templates,the optimized catalyst(denoted as Fe-N-C SAC-950) displays outstanding ORR activity with a high half-wave potential of 0.895 V(vs.reversible hydrogen electrode(RHE)) and a small overpotential of 356 mV at 10 mA cm^(-2) for the oxygen evolution reaction(OER).More excitingly,its application potential is further verified by delivering superb rechargeability and cycling stability with a nearly unfading charge-discharge gap of 0.72 V after 160 h.Molecular dynamics(MD) simulations reveal that micro/mesoporous structure is conducive to the rapid mass transfer of O_(2),thus enhancing the ORR performance.In situ Raman results further indicate that the conversion of O_(2) to~*O_(2)-the rate-determining step(RDS) for Fe-N-C SAC-950.This work will provide a versatile strategy to construct single atom catalysts with desirable catalytic properties.
基金supported by the Joint Funds of the National Natural Science Foundation of China(U20A20280)the Postgraduate Scientific Research Innovation Project of Hunan Province(CX20210171)。
文摘Developing high performance and low-cost catalysts for oxygen reduction reaction(ORR)in challenging acid condition is vital for proton-exchange-membrane fuel cells(PEMFCs).Carbon-supported nonprecious metal single atom catalysts(SACs)have been identified as potential catalysts in the field.Great advance has been obtained in constructing diverse active sites of SACs for improving the performance and understanding the fundamental principles of regulating acid ORR performance.However,the ORR performance of SACs is still unsatisfactory.Importantly,microenvironment adjustment of SACs offers chance to promote the performance of acid ORR.In this review,acid ORR mechanism,attenuation mechanism and performance improvement strategies of SACs are presented.The strategies for promoting ORR activity of SACs include the adjustment of center metal and its microenvironment.The relationship of ORR performance and structure is discussed with the help of advanced experimental investigations and theoretical calculations,which will offer helpful direction for designing advanced SACs for ORR.
文摘Studies have extensively addressed the development of electrocatalytic technologies for energy storage and conversion,fuel production,and environmental protection.Electrode processes such as different oxidation and reduction reactions play a vital and significant role in these technologies.In this regard,efficient,inexpensive,and stable electrocatalysts capable can significantly promote electrochemical reactions.Unique features of metal–organic frameworks(MOFs)such as their high porosity,tunable structure,size,and pore shape,high surface area,and redox properties have introduced them as an ideal electrocatalyst candidate.This review is thus aimed at elucidating the role of MOF-based materials(pristine,derivatives and composites)as efficient electrocatalysts in energy and sensing-related oxidation and reduction reactions such as oxygen reduction reaction(ORR),hydrogen oxidation reaction(HOR),carbon dioxide reduction reaction(CO_(2)RR),urea oxidation reaction(UOR),alcohol oxidation reaction(AOR),nitrogen reduction reaction(NRR),and glucose oxidation reaction(GOR)in advanced energy and sensing devices.Also,the structure–property relationship of the electrocatalyst was elaborated for each electrocatalytic reaction.Finally,perspectives on the potential research topics for practical use of MOF-based electrocatalysts are addressed.The present review can improve the interest in MOF-based electrocatalysts to study different oxidation and reduction reactions in energy and sensing systems.
基金supported by funding from the National Natural Science Foundation of China (12074435 and 52001335)the Science and Technology Innovation Program of Hunan Province (2021RC4001)the Natural Science Foundation of Yunnan Province (202201AT070259)。
文摘Developing highly efficient and stable platinum-based electrocatalyst for oxygen reduction reaction(ORR) is critical to expediting commercialization of fuel cells.Herein,several PtCu alloy nanocatalysts supported on N,P co-doped carbon(PtCu/NPC) were prepared by microbial-sorption and carbonization-reduction.Among them,PtCu/NPC-700 ℃ exhibits excellent catalytic performance for ORR with a mass activity of 0.895 A mg_(pt)^(-1)(@0.9 V) which is 8.29 folds of commercial Pt/C.Additionally,the ECSA and MA of PtCu/NPC-700℃ only decrease by 14.2% and 18.7% respectively,while Pt/C decreases by 35.2% and 52.8% after 10,000 cycles of ADT test.Moreover,the PtCu/NPC-700℃ catalyst emanates a maximum power density of 715 mW cm^(-2) and only 11.1% loss of maximum power density after 10,000 ADTs in single-cell test,indicating PtCu/NPC-700℃ also manifests higher activity and durability in actual single-cell operation than Pt/C.This research provides an easy and novel strategy for developing highly active and durable Pt-based alloy catalyst.
基金supported by the National Key R&D Program of China (2019YFC1804102)the National Natural Science Foundation of China (32171615)。
文摘Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.
基金the National Natural Science Foundation of China(52171199)for the financial support.
文摘Fe single-atom catalysts(Fe-SACs)have been extensively studied as a highly efficient electrocatalyst toward the oxygen reduction reaction(ORR).Nonetheless,they suffer from stability issue induced by dissolution of Fe metal center and the OH^(−)blocking.Herein,a surface molecular engineering strategy is developed by usingβ-cyclodextrins(CDs)as a localized molecular encapsulation.The CD-modified Fe-SAC(Fe-SNC-β-CD)shows obviously improved activity toward the ORR with 0.90 V,4.10 and 4.09 mA cm^(-2)for E_(1/2),J_(0)and Jk0.9,respectively.Meanwhile,the Fe-SNC-β-CD shows the excellent long-term stability against aggressive stress and the poisoning.It is confirmed through electrochemical investigation that modification ofβ-CD can,on one hand,regulate the atomic Fe coordination chemistry through the interaction between the CD and FeN_(x) moiety,while on the other mitigate the strong adsorption of OH^(−)and function as protective barrier against the poisoning molecules leading to enhanced ORR activity and stability for the Fe-SACs.The molecular encapsulation strategy demonstrates the uniqueness of post-pyrolysis surface molecular engineering for the design of single-atom catalyst.
基金supported by the Hainan Province Science and Technology Special Fund(ZDYF2020037,2020207)the National Natural Science Foundation of China(21805104,22109034,22109035,52164028,62105083),the Postdoctoral Science Foundation of Hainan Province(RZ2100007123)the Start-up Research Foundation of Hainan University(KYQD(ZR)-20008,20082,20083,20084,21065,21124,21125).
文摘Oxygen reduction reaction(ORR)is the heart of many new energy conversions and storage devices,such as metal-air batteries and fuel cells.However,ORR is currently facing the dilemma of sluggish intrinsic kinetics and the noble electrocatalysts of high price and low reserves.In this work,isolated Co atoms anchored on defective nitrogen-doped carbon graphene single-atom catalyst(Co-SAC/NC)are synthesized via the proposed movable type printing method.The prepared Co-SAC/NC catalyst demonstrates admirable ORR performance,with a high half-wave potential of 0.884 V in alkaline electrolytes and outstanding durability.In addition,an assembled zinc–air battery with prepared Co-SAC/NC as air-cathode catalyst displays a high-peak power density of 179 mW cm^(-2)and a high-specific capacity(757 mAh g^(-1)).Density functional theory calculations confirm that the true active sites of the prepared catalyst are Co-N_(4)moieties,and further reveal a significantly electronic structure evolution of Co sites in the ORR process,in which the project density of states and local magnetic moment of Co atom varies during its whole reaction process.This work not only paves a new avenue for synthesizing SACs as robust electrocatalysts,but also provides an electronic-level insight into the evolution of the electronic structure of single-atom catalysts.
基金National Research Foundation of Korea(NRF),Grant/Award Number:2021R1A2C2012685Korea Institute of Energy Technology Evaluation and Planning(KETEP),Grant/Award Number:20203020030010Ministry of Trade,Industry&Energy(MOTIE,Korea),Grant/Award Number:20020400。
文摘One of the primary challenges in relation to phosphoric acid fuel cells is catalyst poisoning by phosphate anions that occurs at the interface between metal nanoparticles and the electrolyte.The strong adsorption of phosphate anions on the catalyst surface limits the active sites for the oxygen reduction reaction(ORR),significantly deteriorating fuel cell performance.Here,antipoisoning catalysts consisting of Pt-based nanoparticles encapsulated in an ultrathin carbon shell that can be used as a molecular sieve layer are rationally designed.The pore structure of the carbon shells is systematically regulated at the atomic level by high-temperature gas treatment,allowing O_(2) molecules to selectively react on the active sites of the metal nanoparticles through the molecular sieves.Besides,the carbon shell,as a protective layer,effectively prevents metal dissolution from the catalyst during a long-term operation.Consequently,the defect-controlled carbon shell leads to outstanding ORR activity and durability of the hybrid catalyst even in phosphoric acid electrolytes.
基金the National Natural Science Foundation of China(No.52072256)Shanxi Science and Technology Major Project(No.20201101016)+1 种基金Key R&D program of Shanxi Province(No.202102030201006)Research Project Supported by Shanxi Scholarship Council of China(HGKY2019031).
文摘Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.
基金Y.C.and J.C.are contributed equally to the paper.Project supported by the National Natural Science Foundation of China (U19A2017)the Fundamental Research Funds for the Central South University and the Australian Research Council (DP180100731 and DP180100568)。
文摘The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are urgently required.Transition metal oxides such as CoO_(x),FeO_(x),and NiO_(x)are low-cost,low toxicity,and abundant materials for a wide range of electrochemical reactions,but are almost inert for CO_(2)RR.Here,we report for the first time that nitrogen doped carbon nanotubes(N-CNT)have a surprising activation effect on the activity and selectivity of transition metal-oxide(MO_(x)where M=Fe,Ni,and Co)nanoclusters for CO_(2)RR.MO_(x)supported on N-CNT,MO_(x)/N-CNT,achieves a CO yield of 2.6–2.8 mmol cm−2 min−1 at an overpotential of−0.55 V,which is two orders of magnitude higher than MO_(x)supported on acid treated CNTs(MO_(x)/O-CNT)and four times higher than pristine N-CNT.The faraday efficiency for electrochemical CO_(2)-to-CO conversion is as high as 90.3%at overpotential of 0.44 V.Both in-situ XAS measurements and DFT calculations disclose that MO_(x)nanoclusters can be hydrated in CO_(2)saturated KHCO_(3),and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions,which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.
基金Financial supports from the National Natural Science Foundation of China (21503120, 21403126)Hubei Provincial Natural Science Foundation of China (2018CFB659)Innovation Foundation from China Three Gorges University (2019SSPY150)
文摘Pd-based nanocatalyst is a potential oxygen reduction oxidation(ORR)catalyst because of its high activity in alkaline medium and low cost.In this work,bimetallic Pd Au nanocatalysts are prepared by one-pot hydrothermal method using triblock pluronic copolymers,poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)(PEO19-PPO69-PEO19)(P123)as reducer and stabilizer,and heat-treatment method is applied to regulate catalyst structure and improve catalyst activity.The results show that the heat treatment can agglomerate the catalyst to a certain extent,but effectively improve the crystallinity and alloying degree of the catalyst.The ORR performance of the Pd Au nanocatalysts obtained under different heat treatment conditions is systematically investigated.Compared with commercial Pd black and Pd Au catalyst before heat treatment,the ORR performance of Au Pd nanocatalyst obtained after heat treatment for one hour at 500℃ has been enhanced.The Pd Au nanocatalysts after heat treatment also display enhanced anti-methanol toxicity ability in acidic medium.
基金the financial support of the Fundamental Research Funds for the Central Universities (CCNU20QN007, CCNU20TS013)the Program of Introducing Talents of Discipline to Universities of China (111 program, B17019)the Recruitment Program of Global Youth Experts of China。
文摘Single-atom catalysts(SACs) with nitrogen-coordinated nonprecious metal sites have exhibited inimitable advantages in electrocatalysis.However,a large room for improving their activity and durability remains.Herein,we construct atomically dispersed Fe sites in N-doped carbon supports by secondary-atom-doped strategy.Upon the secondary doping,the density and coordination environment of active sites can be efficiently tuned,enabling the simultaneous improvement in the number and reactivity of the active site.Besides,structure optimizations in terms of the enlarged surface area and improved hydrophilicity can be achieved simultaneously.Due to the beneficial microstructure and abundant highly active FeN_5 moieties resulting from the secondary doping,the resultant catalyst exhibits an admirable half-wave potential of 0.81 V versus 0.83 V for Pt/C and much better stability than Pt/C in acidic media.This work would offer a general strategy for the design and preparation of highly active SACs for electrochemical energy devices.
基金supported by the Australian Research Council Australian Laureate Fellowship(No.FL200100049)the support of Natural Science Foundation for Young Scholars of Jiangsu Province(No.BK20220879)+1 种基金National Natural Science Foundation for Young Scholars of China(No.22209072)Monash University for a PhD scholarship as part of the university support for establishment of the ARC Research Hub for Energy-efficient Separation(H170100009)。
文摘Metal-air batteries face a great challenge in developing efficient and durable low-cost oxygen reduction reaction(ORR)electrocatalysts.Single-atom iron catalysts embedded into nitrogen doped carbon(Fe-N-C)have emerged as attractive materials for potential replacement of Pt in ORR,but their catalytic performance was limited by the symmetrical electronic structure distribution around the single-atom Fe site.Here,we report our findings in significantly enhancing the ORR performance of Fe-N-C by moderate Fe_(2)O_(3) integration via the strong electronic interaction.Remarkably,the optimized catalyst(M-Fe_(2)O_(3)/Fe_(SA)@NC)exhibits excellent activity,durability and good tolerance to methanol,outperforming the benchmark Pt/C catalyst.When M-Fe_(2)O_(3)/Fe_(SA)@NC catalyst was used in a practical zinc-air battery assembly,peak power density of 155 mW cm^(-2)and specific capacity of 762 mA h g_(Zn)^(-1)were achieved and the battery assembly has shown superior cycling stability over a period of 200 h.More importantly,theoretical studies suggest that the introduction of Fe_(2)O_(3) can evoke the crystal field alteration and electron redistribution on single Fe atoms,which can break the symmetric charge distribution of Fe-N_(4) and thereby optimize the corresponding adsorption energy of intermediates to promote the O_(2)reduction.This study provides a new pathway to promote the catalytic performance of single-atom catalysts.
基金financially supported by the Key Program of the Chinese Academy of Science(grant no.KGZD-EW-T08)the National Basic Research Program of China(973 Program,2012CB215500)the"Strategic Priority Research Program"of the Chinese Academy of Sciences(grant no.XDA09030104)
文摘Carbon supported gold-iridium composite(Au Ir/C) was synthesized by a facile one-step process and was investigated as the bifunctional catalyst for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER). The physical properties of the Au Ir/C composite were characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). Although the Au and Ir in the Au Ir/C did not form alloy, it is clear that the introduction of Ir decreases the average Au particle size to 4.2 nm compared to that in the Au/C(10.1 nm). By systematical analysis on chemical state of metal surface via XPS and the electrochemical results, it was found that the Au surface for the Au/C can be activated by potential cycling from 0.12 V to 1.72 V, resulting in the increased surface roughness of Au,thus improving the ORR activity. By the same potential cycling, the Ir surface of the Ir/C was irreversibly oxidized, leading to degraded ORR activity but uninfluenced OER activity. For the Au Ir/C, Ir protects Au against being oxidized due to the lower electronegativity of Ir. Combining the advantages of Au and Ir in catalyzing ORR and OER, the Au Ir/C catalyst displays an enhanced catalytic activity to the ORR and a comparable OER activity. In the 50-cycle accelerated aging test for the ORR and OER, the Au Ir/C displayed a satisfied stability, suggesting that the Au Ir/C catalyst is a potential bifunctional catalyst for the oxygen electrode.
基金the National Natural Science Foundation of China (21473111)the Fundamental Research Funds for the Central Universities (GK201701007)
文摘The research on electrocatalysts with relatively lower price than Pt and excellent electrocatalytic performance for the cathode oxygen reduction reaction(ORR) and anode methanol oxidation reaction(MOR) is vital for the development of direct methanol fuel cells(DMFCs). In this work, we develop a cyanogel-reduction method to synthesize reduced graphene oxide(rGO) supported highly dispersed PdNi alloy nanocrystals(PdNi/rGO) with high alloying degree and tunable Pd/Ni ratio. The large specific surface area and the d-band center downshift of Pd result in excellent activity of Pd4 Ni1/rGO nanohybrids for the ORR. The modification of Pd electronic structure can facilitate the adsorption of CH3 OH on Pd surface and the highly oxophilic property of Ni can eliminate/mitigate the COadsintermediates poisoning, which make PdNi/r GO nanohybrids possess superior MOR activity. In addition, rGO improve the stability of PdNi alloy nanocrystals for the ORR and MOR. Due to high activity and stability for the ORR and MOR, PdNi/rGO nanohybrids are promising to be an available bifunctional electrocatalyst in DMFCs.
基金the financial support from the National Natural Science Foundation of China (52076045)the Ministry of Science and Technology of China (2019YFC1906700, 2018YFC1902600)the support from “Zhishan Scholar” of Southeast University。
文摘Developing efficient electrocatalysts for converting dinitrogen to ammonia through electrocatalysis is of significance to the decentralized ammonia production. Here, through high-throughput density functional theory calculations, we demonstrated that the interfacial modulation of hexagonal boron nitride/graphene(hBN-graphene) could sufficiently improve the catalytic activity of the single transition metal atom catalysts for nitrogen reduction reaction(NRR). It was revealed that Re@hBN-graphene and Os@hBN-graphene possessed remarkable NRR catalytic activity with low limiting potentials of 0.29 V and 0.33 V, respectively. Furthermore, the mechanism of the enhanced catalytic activity was investigated based on various descriptors of the adsorption energies of intermediates, where the synergistic effect of hBN and graphene in the hybrid substrate was found to play a key role. Motivated by the synergistic effect of hybrid substrate in single-atom catalysts, a novel strategy was proposed to efficiently design dual-atom catalysts by integrating the merits of both metal components. The as-designed dual-atom catalyst Fe-Mo@hBN exhibited more excellent NRR catalytic performance with a limiting potential of 0.17 V, manifesting the solidity of the design strategy. Our findings open new avenues for the search of heterostructure substrates for single-atom catalysts and the efficient design of dualatom catalysts for NRR.
基金financially supported by the National Natural Science Foundation of China (U2032157)the Natural Science Foundation of Jiangsu Province (BK20201425)。
文摘The growth of electrochemically inert segregation layers on the surface of solid oxide fuel cell cathodes has become a bottleneck restricting the development of perovskite-structured oxygen reduction catalysts.Here,we report a new discovery in which enriched Ba and Fe ions on the near-surface of Nd_(1/2)Ba_(1/2)Co_(1/3)Fe_(1/3)Mn_(1/3)O_(3-δ)spontaneously agglomerate into dispersed Ba_(5)Fe_(2)O_(8) nanoparticles and maintain a highly active and durable perovskite structure on the surface.This unique surface selfcleaning phenomenon is related to the low average potential energy of Ba_(5)Fe_(2)O_(8),which is grown on the near-surface layer.The electrochemically inert Ba_(5)Fe_(2)O_(8) segregation layer on the near-surface of the perovskite catalyst achieves self-cleaning by regulating the formation energy of enriched metal oxides.This self-cleaned perovskite surface exhibits an ultrafast oxygen exchange rate,high catalytic activity for the oxygen reduction reaction,and good adaptability to the actual working conditions of solid oxide fuel cell stacks.This study paves a new way for overcoming the stubborn problem of perovskite catalyst surface deactivation and enriches the scientific knowledge of surface catalysis.
基金supported by the National Natural Science Foundation of China(No.51632007)the National Science and Technology Major Project(2017-VI-0007-0077)。
文摘CO_(x)(x=1,2)and O_(2) chemistry play key roles in tackling global severe environmental challenges and energy issues.To date,the efficient selective electrocatalytic transformations of COx-carbon chemicals,and O_(2)-hydrogenated products are still huge challenges.Single-atom catalysts(SACs)as atomic-scale novel catalysts in which only isolated metal atoms are dispersed on supports shed new insights in overcome these obstacles in CO_(x) and O_(2) chemistry,including CO oxidation,CO_(2) reduction reaction(CO_(2)RR),oxygen reduction reaction(ORR),and oxygen evolution reaction(OER).In this review,the unique features and advanced synthesis strategies of SACs from a viewpoint of fundamental synthesis design are first highlighted to guide future strategy design for controllable SAC synthesis.Then,the to-date reported CO_(2)RR,CO oxidation,OER,and ORR mechanism are included and summarized.More importantly,the design principles and design strategies of improving the intrinsic activity,selectivity,and stability are extensively discussed and the engineering strategy is classified as neighbor coordination engineering,metal-atom engineering,and substrate engineering.Via the comprehensive review and summary of state-of-the-art SACs,the synthesis–structure–property–mechanism–design principle relation can be revealed to shed lights into the structural construction of SACs.Finally,we present an outlook on current challenges and future directions for SACs in CO_(x) and O_(2) chemistry.
基金the financial support provided by the National Natural Science Foundation of China(22075290,21972068,52164028)the Beijing Natural Science Foundation(Z200012)+3 种基金the State Key Laboratory of Multiphase Complex Systemsthe Institute of Process Engineeringthe Chinese Academy of Sciences(MPCS-2021-A-05)the Nanjing IPE Institute of Green Manufacturing Industry(E0010725).
文摘Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1) at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1) and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.
