Objective: To evaluate the value of MSCT plain scan and enhanced CT in the diagnosis of thymic adenocarcinoma. Methods: From May 2013 to June 2018, 37 cases of MSCT plain scan and dual-phase enhanced scan of thymic ad...Objective: To evaluate the value of MSCT plain scan and enhanced CT in the diagnosis of thymic adenocarcinoma. Methods: From May 2013 to June 2018, 37 cases of MSCT plain scan and dual-phase enhanced scan of thymic adenocarcinoma were retrospectively analyzed. The location, shape, size, density (CT value), enhanced features, peripheral invasion and mediastinal lymph node metastasis of the lesions were observed. Results: All 37 cases of thymic adenocarcinoma were diagnosed by CT before operation, and all cases were diagnosed by pathology after operation as malignant tumors,including 28 cases of thoracic adenocarcinoma and 9 cases of invasive thymoma. All 28 cases of thymic adenocarcinoma were single lesion of anterior superior mediastinum. The maximum cross-section was located in the midline in 7 cases and on the mediastinal side in 21 cases with significant difference (P<0.05). All lesions were irregular lobulated. The minimum diameter of lesions was 2.1 cm and the maximum diameter was 8.6 cm. Soft tissue density was dominant in the solid part. All cases of thymic adenocarcinoma showed inhomogeneous, moderate and severe enhancement in the arterial and venous phase after enhancement. The degree of enhancement in the venous phase was higher than that in the arterial phase, and there was no enhancement in the irregular liquefied necrosis area. 26 cases had necrotic lesions, 21 cases had mediastinal lymph node metastasis, and 8 cases had invasion of adjacent pleura. 19 cases had mediastinal vessels and 0 cases had distant pleural metastases. Conclusion: MSCT plain scan combined with dual-phase enhanced CT is helpful to display the details and metastasis of thymic adenocarcinoma, improve the coincidence rate of CT diagnosis and pathological diagnosis, and reduce the misdiagnosis rate. To provide help for clinical diagnosis and treatment of thymic adenocarcinoma.展开更多
Optical reflection anisotropy microscopy mappings of micropipe defects on the surface of a 4H-SiC single crystal are studied by the scanning anisotropy microscopy(SAM)system.The reflection anisotropy(RA)image with a&#...Optical reflection anisotropy microscopy mappings of micropipe defects on the surface of a 4H-SiC single crystal are studied by the scanning anisotropy microscopy(SAM)system.The reflection anisotropy(RA)image with a'butterfly pattern'is obtained around the micropipes by SAM.The RA image of the edge dislocations is theoretically simulated based on dislocation theory and the photoelastic principle.By comparing with the Raman spectrum,it is verified that the micropipes consist of edge dislocations.The different patterns of the RA images are due to the different orientations of the Burgers vectors.Besides,the strain distribution of the micropipes is also deduced.One can identify the dislocation type,the direction of the Burgers vector and the optical anisotropy from the RA image by using SAM.Therefore,SAM is an ideal tool to measure the optical anisotropy induced by the strain field around a defect.展开更多
Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate ...Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.展开更多
To address climate change and promote environmental sustainability,electrochemical energy conversion and storage systems emerge as promising alternative to fossil fuels,catering to the escalating demand for energy.Ach...To address climate change and promote environmental sustainability,electrochemical energy conversion and storage systems emerge as promising alternative to fossil fuels,catering to the escalating demand for energy.Achieving optimal energy efficiency and cost competitiveness in these systems requires the strategic design of electrocatalysts,coupled with a thorough comprehension of the underlying mechanisms and degradation behavior occurring during the electrocatalysis processes.Scanning electrochemical microscopy(SECM),an analytical technique for studying surface electrochemically,stands out as a powerful tool offering electrochemical insights.It possesses remarkable spatiotemporal resolution,enabling the visualization of the localized electrochemical activity and surface topography.This review compiles crucial research findings and recent breakthroughs in electrocatalytic processes utilizing the SECM methodology,specifically focusing on applications in electrolysis,fuel cells,and metal–oxygen batteries within the realm of energy conversion and storage systems.Commencing with an overview of each energy system,the review introduces the fundamental principles of SECM,and aiming to provide new perspectives and broadening the scope of applied research by describing the major research categories within SECM.展开更多
To investigate the macroscopic fatigue properties and the mesoscopic pore evolution characteristics of salt rock under cyclic loading,fatigue tests under different upper-limit stresses were carried out on salt rock,an...To investigate the macroscopic fatigue properties and the mesoscopic pore evolution characteristics of salt rock under cyclic loading,fatigue tests under different upper-limit stresses were carried out on salt rock,and the mesoscopic pore structures of salt rock before and after fatigue tests and under different cycle numbers were measured using CT scanning instrument.Based on the test results,the effects of the cycle number and the upper-limit stress on the evolution of cracks,pore morphology,pore number,pore volume,pore size,plane porosity,and volume porosity of salt rock were analyzed.The failure path of salt rock specimens under cyclic loading was analyzed using the distribution law of plane porosity.The damage variable of salt rock under cyclic loading was defined on basis of the variation of volume porosity with cycle number.In order to describe the fatigue deformation behavior of salt rock under cyclic loading,the nonlinear Burgers damage constitutive model was further established.The results show that the model established can better reflect the whole development process of fatigue deformation of salt rock under cyclic loading.展开更多
AIM:To propose an algorithm for automatic detection of diabetic retinopathy(DR)lesions based on ultra-widefield scanning laser ophthalmoscopy(SLO).METHODS:The algorithm utilized the FasterRCNN(Faster Regions with CNN ...AIM:To propose an algorithm for automatic detection of diabetic retinopathy(DR)lesions based on ultra-widefield scanning laser ophthalmoscopy(SLO).METHODS:The algorithm utilized the FasterRCNN(Faster Regions with CNN features)+ResNet50(Residua Network 50)+FPN(Feature Pyramid Networks)method for detecting hemorrhagic spots,cotton wool spots,exudates,and microaneurysms in DR ultra-widefield SLO.Subimage segmentation combined with a deeper residual network FasterRCNN+ResNet50 was employed for feature extraction to enhance intelligent learning rate.Feature fusion was carried out by the feature pyramid network FPN,which significantly improved lesion detection rates in SLO fundus images.RESULTS:By analyzing 1076 ultra-widefield SLO images provided by our hospital,with a resolution of 2600×2048 dpi,the accuracy rates for hemorrhagic spots,cotton wool spots,exudates,and microaneurysms were found to be 87.23%,83.57%,86.75%,and 54.94%,respectively.CONCLUSION:The proposed algorithm demonstrates intelligent detection of DR lesions in ultra-widefield SLO,providing significant advantages over traditional fundus color imaging intelligent diagnosis algorithms.展开更多
The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory e...The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.展开更多
In recent years,the Red Tourism in Central Plains has gradually become a new type of thematic tourism form,which is an important carrier to carry out patriotism and revolutionary traditional education and carry forwar...In recent years,the Red Tourism in Central Plains has gradually become a new type of thematic tourism form,which is an important carrier to carry out patriotism and revolutionary traditional education and carry forward the national spirit.The translation of red tourism publicity is an important window for spreading Chinese culture,and the translation of professional terms is an important link in the red tourism publicity.How to spread the red culture of the Central Plains,glow the charm of the Central Plains culture,enhance the influence of the Central Plains culture,and spread the Central Plains culture to the world has become the mission of every child of the Central Plains.This paper adopts the case analysis method,combined with the specific and typical cases in“Red Central Plains”,and uses different translation strategies and methods to explore the difficulties and solutions of the translation of terms in the red tourism text.展开更多
Due to growing demand and reduction of water resources and increasing pollution of water,driven by dramatic population and economic growth, arid and semi-arid land's imminent water problems are nowadays aggravatin...Due to growing demand and reduction of water resources and increasing pollution of water,driven by dramatic population and economic growth, arid and semi-arid land's imminent water problems are nowadays aggravating. This study aims to determine the most appropriate management strategies for balancing the Abhar plain aquifer using the SWOT coupled with AHP technique. The results indicate that weaknesses prevail over strengths as well as threats over opportunities. The placement in the quarter of weaknesses-threats with a defensive strategy indicates the critical condition of the Abhar plain aquifer. The most appropriate solutions to achieve the goal of balancing the groundwater were prioritized by AHP method. According to results, improper management of water consumption with a weight of 72.5% is the most destructive factor in reducing groundwater resources. Among the types of consumption, the effect of an agricultural factor carries a weight of 74.2%. The exploitation of illegal wells, overdraft of exploitation license provisions of wells, reduction of precipitation and traditional irrigation methods were selected as the destructive factors causing the deteriration of groundwater resources. Also, with filling the illegal wells,changing the type of cultivation and greenhouse crops cultivation, installing a smart water meter,observance the provisions of the water exploitation license, implementing integrated pressurized irrigation systems, benefiting from suitable climatic conditions and geographical location for cultivating and developing the low-water use species and industries and on the other hand, with implementing artificial recharge to control the surface water resources and reduce abstraction from groundwater aquifers, the adverse trend of Abhar Plain groundwater resources can be controlled.展开更多
The dissolution kinetics of Al_(2)O_(3) in CaO-Al_(2)O_(3) SiOslags was studied using a high-temperature confocal scanning laser microscope at 1773 to 1873 K.The results show that the controlling step during the Al_(2...The dissolution kinetics of Al_(2)O_(3) in CaO-Al_(2)O_(3) SiOslags was studied using a high-temperature confocal scanning laser microscope at 1773 to 1873 K.The results show that the controlling step during the Al_(2)O_(3) dissolution was the diffusionin molten slag.It was found that the dissolution curves of Al_(2)O_(3) particles were hardly agreed with the traditional boundary layer diffusion model with the increase of the CaO/Al_(2)O_(3) ratio of slag.A modified diffusion equation considering slag viscosity was developed to study the dissolution mechanism of Al_(2)O_(3) in slag.Diffusion coefficients of Al_(2)O_(3) in slag were calculated as 2.8×10to 4.1×10m~2/s at the temperature of 1773-1873 K.The dissolution rate of Al_(2)O_(3) increased with higher temperature,CaO/Al_(2)O_(3),and particle size.A new model was shown to be v_(Al_(2)O_(3))=0.16×r_(0)^(1.58)×x^(3.52)×(T-T_(mp))^(1.11)to predict the dissolution rate and the total dissolution time of Al_(2)O_(3) inclusions with various sizes,where vAl_(2)O_(3) is the dissolution rate of Al_(2)O_(3) in volume,μm^(3)/s;x is the value of CaO/Al_(2)O_(3) mass ratio;R_(0) is the initial radius of Al_(2)O_(3),μm;T is the temperature,K;T_(mp) is the melting point of slag,K.展开更多
Objective: To evaluate the lung CT scan as a possible predictive diagnostic method for COVID-19 in the Cameroonian context. Methods: We designed a cross sectional study. Suspected cases of COVID-19 during the first wa...Objective: To evaluate the lung CT scan as a possible predictive diagnostic method for COVID-19 in the Cameroonian context. Methods: We designed a cross sectional study. Suspected cases of COVID-19 during the first wave at the national social insurance fund (NSIF) hospital were screened with both COVID-19 with lung CT scan and a PCR test. Univariate analysis was performed for sample description and multivariate analysis to assess the correlation between positive results for the PCR and other parameters. We estimated the optimum threshold of sensitivity/specificity, and area under curve using the empirical method and package. Results: A total of 62 suspected COVID-19 cases were recorded, predominantly males (Sex Ratio = 2.2) with a median age of 58.5 (IQR = 19.7). Among our 62 patients, 29 (46.8%) were confirmed COVID-19 cases with positive PCR results. All the patients had a thorax CT scan with a median impairment of 40% (IQR = 20%). The optimum threshold estimate for CT scan for COVID-19 infection diagnosis was 60% (95% CI = 25% - 80%). Overall, the sensitivity and specificity estimates were 0.30 (95% CI = 0.15 - 0.49) and 0.87 (95% CI = 0.70 - 0.96), respectively, leading to an Area Under Curve (AUC) estimate of 0.59 (95% CI = 0.46, 0.71). Conclusion: In this setting, lung CT scan was neither sensitive nor specific to predict COVID-19 disease.展开更多
Introduction: A scanning acoustic microscope (SAM) is an apparatus for imaging acoustic properties. This apparatus can non-invasively and rapidly evaluate the hardness of materials in the elastic region. This device s...Introduction: A scanning acoustic microscope (SAM) is an apparatus for imaging acoustic properties. This apparatus can non-invasively and rapidly evaluate the hardness of materials in the elastic region. This device shows great potential for the diagnosis of dental caries in the clinical setting. However, since the tissue elastic modulus measured using a SAM is a property of the elastic region and the Knoop hardness is a property of the plastic region, the hardness properties differ completely. Therefore, we investigated whether the acoustic impedance measured using a SAM is related to the Knoop hardness, which is used as the standard for removal of carious dentin. Method: Polished sections were prepared from 20 extracted carious wisdom teeth. The acoustic impedance and Knoop hardness were measured for each section. In addition to comparing carious and healthy dentin in SAM images, we evaluated the difference between the carious and healthy dentin in terms of the acoustic impedance and Knoop hardness. We also evaluated the correlation between the Knoop hardness and acoustic impedance. Results: The SAM images were visualized as two-dimensional color images based on the acoustic impedance values. The mean acoustic impedance of carious dentin was significantly lower than that of healthy dentin, showing a similar trend as Knoop hardness. A strong correlation was observed between the two. Discussion: The acoustic impedance values obtained through acoustic microscopy differed significantly between carious and sound dentin. Both types of dentins were visualized using two-dimensional color images. A strong correlation was observed between the acoustic impedance value, which indicates the hardness of the elastic region, and the Knoop hardness, which indicates the hardness of the plastic region. The results of the present study indicate that acoustic impedance accurately reflects the hardness of dentin.展开更多
Infiltration is an important part of the hydrological cycle, and it is one of the main abstractions accounted for in the rainfall-runoff modeling. The main purpose of this study is to compare the infiltration models t...Infiltration is an important part of the hydrological cycle, and it is one of the main abstractions accounted for in the rainfall-runoff modeling. The main purpose of this study is to compare the infiltration models that were used to assess the infiltration rate of the Mitidja Plain in Algeria. Field infiltration tests were conducted at 40 different sites using a double ring infiltrometer. Five statistical comparison criteria including root mean squared error(RMSE), normalized root mean squared error(NRMSE), coefficient of correlation(CC), Nash-Sutcliffe efficiency(NSE), and Kling-Gupta efficiency(KGE) were used to determine the best performing infiltration model and to confirm anomalies between predicted and observed values. Then we evaluated performance of five models(i.e., the Philip model, Kostiakov model, Modified Kostiakov model, Novel model, and Horton model) in simulating the infiltration process based on the adjusted performance parameters cited above. Results indicated that the Novel model had the best simulated water infiltration process in the Mitidja Plain in Algeria. However, the Philip model was the weakest to simulate the infiltration process. The conclusion of this study can be useful for estimating infiltration rate at various sites using a Novel model when measured infiltration data are not available and are useful for planning and managing water resources in the study area.展开更多
Understanding the spatial distribution of the crop yield gap(YG)is essential for improving crop yields.Recent studies have typically focused on the site scale,which may lead to considerable uncertainties when scaled t...Understanding the spatial distribution of the crop yield gap(YG)is essential for improving crop yields.Recent studies have typically focused on the site scale,which may lead to considerable uncertainties when scaled to the regional scale.To mitigate this issue,this study used a process-based and remote sensing driven crop yield model for winter wheat(PRYM-Wheat),which was derived from the boreal ecosystem productivity simulator(BEPS),to simulate the YG of winter wheat in the North China Plain from 2015 to 2019.Yield validation based on statistical yield data revealed good performance of the PRYM-Wheat Model in simulating winter wheat actual yield(Ya).The distribution of Ya across the North China Plain showed great heterogeneity,decreasing from southeast to northwest.The remote sensing-estimated results show that the average YG of the study area was 6400.6 kg ha^(–1).The YG of Jiangsu Province was the largest,at7307.4 kg ha^(–1),while the YG of Anhui Province was the smallest,at 5842.1 kg ha^(–1).An analysis of the responses of YG to environmental factors showed no obvious correlation between YG and precipitation,but there was a weak negative correlation between YG and accumulated temperature.In addition,the YG was positively correlated with elevation.In general,studying the specific features of the YG can provide directions for increasing crop yields in the future.展开更多
The Songnen Plain is a crucial agricultural area in China,and in the past 20 years,a large number of dry fields have been developed into paddy fields in order to improve land output efficiency.As a result,the effectiv...The Songnen Plain is a crucial agricultural area in China,and in the past 20 years,a large number of dry fields have been developed into paddy fields in order to improve land output efficiency.As a result,the effective irrigation area of agriculture has increased annually,and the conversion mode and quantity between surface water and groundwater have changed considerably.It is essential to identify the changes in groundwater resources and their influencing factors for the sustainable development of economy and society.This study evaluates groundwater resources in the Songnen Plain using the water balance method based on meteorological,hydrological and groundwater monitoring data from 2000 to 2020.The results 3 show that the groundwater resources in the region amount to 15.945 billion m with precipitation infiltration being the most important component,accounting for 73.09%,which is followed surface water irrigation infiltration and river and ditch infiltration,constituting 14.55%and 10.32%,respectively.Different factors influence groundwater resources in different periods.Compared to 1985,the increase of surface water irrigation infiltration is the primary factor responsible for the increase of groundwater resources,while other recharge sources have decreased during the same period.Compared to 2005,all groundwater resources have increased,with the increase of surface water irrigation infiltration and river channel infiltration being the primary factors.展开更多
Accurate estimation of regional winter wheat yields is essential for understanding the food production status and ensuring national food security.However,using the existing remote sensing-based crop yield models to ac...Accurate estimation of regional winter wheat yields is essential for understanding the food production status and ensuring national food security.However,using the existing remote sensing-based crop yield models to accurately reproduce the inter-annual and spatial variations in winter wheat yields remains challenging due to the limited ability to acquire irrigation information in water-limited regions.Thus,we proposed a new approach to approximating irrigations of winter wheat over the North China Plain(NCP),where irrigation occurs extensively during the winter wheat growing season.This approach used irrigation pattern parameters(IPPs)to define the irrigation frequency and timing.Then,they were incorporated into a newly-developed process-based and remote sensing-driven crop yield model for winter wheat(PRYM–Wheat),to improve the regional estimates of winter wheat over the NCP.The IPPs were determined using statistical yield data of reference years(2010–2015)over the NCP.Our findings showed that PRYM–Wheat with the optimal IPPs could improve the regional estimate of winter wheat yield,with an increase and decrease in the correlation coefficient(R)and root mean square error(RMSE)of 0.15(about 37%)and 0.90 t ha–1(about 41%),respectively.The data in validation years(2001–2009 and 2016–2019)were used to validate PRYM–Wheat.In addition,our findings also showed R(RMSE)of 0.80(0.62 t ha–1)on a site level,0.61(0.91 t ha–1)for Hebei Province on a county level,0.73(0.97 t ha–1)for Henan Province on a county level,and 0.55(0.75 t ha–1)for Shandong Province on a city level.Overall,PRYM–Wheat can offer a stable and robust approach to estimating regional winter wheat yield across multiple years,providing a scientific basis for ensuring regional food security.展开更多
The microwave-induced thermoacoustic imaging(TAI)technology has both the advantages of high contrast of microwave imaging and high resolution of ultrasound imaging(UI),so it has carried out exploratory application res...The microwave-induced thermoacoustic imaging(TAI)technology has both the advantages of high contrast of microwave imaging and high resolution of ultrasound imaging(UI),so it has carried out exploratory application research in various areas,such as the early detection of breast tumors and cerebrovascular diseases.However,the microwave generator used in the traditional TAI technology is huge and expensive,and the temporal resolution is also too low due to the single-element scanning mechanism.Thus,it is difficult to meet the needs of clinical applications.In this paper,the iterative process and the analysis of related application scenarios from single-element scanning to portable and array-based TAI,such as the miniaturized microwave generator,handheld antenna,multi-channel data acquisition,and UI/TAIdual-modality imaging,are reviewed,and the future trends of this technology are discussed.This review helps researchers in the field of TAI learn the technological development process and future trends.It also deepens clinicians’understanding of TAI so as to put forward more application requirements.展开更多
Background: The plain abdominal x-ray is one of the commonly requested investigations in the children emergency room, paediatric surgical ward and neonatal wards. The short interval required to carry out this investig...Background: The plain abdominal x-ray is one of the commonly requested investigations in the children emergency room, paediatric surgical ward and neonatal wards. The short interval required to carry out this investigative procedure and obtain results makes it the first imaging modality used to unravel the different causes of acute abdominal conditions in children. The safety of abdominal x-ray in children makes it attractive for use in paediatric surgical practice as part of routine work-up for undifferentiated acute abdominal conditions and also to diagnose specific causes of acute abdomen in children. Setting: Olabisi Onabanjo University Teaching Hospital, Sagamu, Ogun State. Objectives: Evaluation of the role of plain abdominal x-ray in diagnosing common acute abdominal conditions in children. Materials and method: Patients admitted to the children emergency room, paediatric surgical wards, children’s ward and neonatal ward who had plain abdominal x-ray as part of their diagnostic work-up were included in the study. They were studied prospectively between March 2011 and April 2021. Results: Three Hundred and Ninety-nine patients who had plain abdominal x-rays as part of their diagnostic work-up were studied. Males were 240 while females were 159, a male to female ratio of 1.5:1. The patients were aged between 1 day to 16 years. Differential diagnoses made with plain abdominal x-ray were intestinal obstruction in 298, perforated viscus 69 patients, intra-abdominal masses 13 patients and location of intra-abdominal foreign body 14. Intestinal obstruction cases in which plain abdominal x-ray played a role in their diagnosis and management included the following: intussusception 66, neonatal sepsis 60, malrotation 48, intestinal atresia 42, anorectal malformation 32, hirschsprung’s disease in 30 cases, pyloric stenosis 24, obstructed hernia 22, post-operative adhesions 16 and intestinal helminthiasis 12. Perforated viscus accounted for 69 indications. Out of these indications, perforated gut in intussusception 19, perforated typhoid ileitis was responsible in 13 cases, gut perforation in blunt abdominal trauma 8, perforation in strangulated hernia 11 cases, perforated gut in malrotation 7, ceacal perforation in hirschsprugs disease 6 and colonic perforation in necrotizing enterocolitis 5 cases. Conclusion: Plain abdominal x-ray remains a role to play in the differential diagnosis and management of common paediatric acute abdominal conditions.展开更多
文摘Objective: To evaluate the value of MSCT plain scan and enhanced CT in the diagnosis of thymic adenocarcinoma. Methods: From May 2013 to June 2018, 37 cases of MSCT plain scan and dual-phase enhanced scan of thymic adenocarcinoma were retrospectively analyzed. The location, shape, size, density (CT value), enhanced features, peripheral invasion and mediastinal lymph node metastasis of the lesions were observed. Results: All 37 cases of thymic adenocarcinoma were diagnosed by CT before operation, and all cases were diagnosed by pathology after operation as malignant tumors,including 28 cases of thoracic adenocarcinoma and 9 cases of invasive thymoma. All 28 cases of thymic adenocarcinoma were single lesion of anterior superior mediastinum. The maximum cross-section was located in the midline in 7 cases and on the mediastinal side in 21 cases with significant difference (P<0.05). All lesions were irregular lobulated. The minimum diameter of lesions was 2.1 cm and the maximum diameter was 8.6 cm. Soft tissue density was dominant in the solid part. All cases of thymic adenocarcinoma showed inhomogeneous, moderate and severe enhancement in the arterial and venous phase after enhancement. The degree of enhancement in the venous phase was higher than that in the arterial phase, and there was no enhancement in the irregular liquefied necrosis area. 26 cases had necrotic lesions, 21 cases had mediastinal lymph node metastasis, and 8 cases had invasion of adjacent pleura. 19 cases had mediastinal vessels and 0 cases had distant pleural metastases. Conclusion: MSCT plain scan combined with dual-phase enhanced CT is helpful to display the details and metastasis of thymic adenocarcinoma, improve the coincidence rate of CT diagnosis and pathological diagnosis, and reduce the misdiagnosis rate. To provide help for clinical diagnosis and treatment of thymic adenocarcinoma.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2018YFE0204001,2018YFA0209103,2016YFB0400101,and 2016YFB0402303)the National Natural Science Foundation of China(Grant Nos.61627822,61704121,61991430,and 62074036)Postdoctoral Research Program of Jiangsu Province(Grant No.2021K599C).
文摘Optical reflection anisotropy microscopy mappings of micropipe defects on the surface of a 4H-SiC single crystal are studied by the scanning anisotropy microscopy(SAM)system.The reflection anisotropy(RA)image with a'butterfly pattern'is obtained around the micropipes by SAM.The RA image of the edge dislocations is theoretically simulated based on dislocation theory and the photoelastic principle.By comparing with the Raman spectrum,it is verified that the micropipes consist of edge dislocations.The different patterns of the RA images are due to the different orientations of the Burgers vectors.Besides,the strain distribution of the micropipes is also deduced.One can identify the dislocation type,the direction of the Burgers vector and the optical anisotropy from the RA image by using SAM.Therefore,SAM is an ideal tool to measure the optical anisotropy induced by the strain field around a defect.
基金the National Science and Technology Major Project(Grant No.2017-VII-0011-0106)Natural Science Foundation of Heilongjiang Province(Grant No.ZD2019A001).
文摘Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.
基金supported by a characterization platform for advanced materials funded by the Korea Research Institute of Standards and Science(KRISS-2023-GP2023-0014)the KRISS(Korea Research Institute of Standards and Science)MPI Lab.program。
文摘To address climate change and promote environmental sustainability,electrochemical energy conversion and storage systems emerge as promising alternative to fossil fuels,catering to the escalating demand for energy.Achieving optimal energy efficiency and cost competitiveness in these systems requires the strategic design of electrocatalysts,coupled with a thorough comprehension of the underlying mechanisms and degradation behavior occurring during the electrocatalysis processes.Scanning electrochemical microscopy(SECM),an analytical technique for studying surface electrochemically,stands out as a powerful tool offering electrochemical insights.It possesses remarkable spatiotemporal resolution,enabling the visualization of the localized electrochemical activity and surface topography.This review compiles crucial research findings and recent breakthroughs in electrocatalytic processes utilizing the SECM methodology,specifically focusing on applications in electrolysis,fuel cells,and metal–oxygen batteries within the realm of energy conversion and storage systems.Commencing with an overview of each energy system,the review introduces the fundamental principles of SECM,and aiming to provide new perspectives and broadening the scope of applied research by describing the major research categories within SECM.
基金supported by the National Natural Science Foundation of China(No.52178354).
文摘To investigate the macroscopic fatigue properties and the mesoscopic pore evolution characteristics of salt rock under cyclic loading,fatigue tests under different upper-limit stresses were carried out on salt rock,and the mesoscopic pore structures of salt rock before and after fatigue tests and under different cycle numbers were measured using CT scanning instrument.Based on the test results,the effects of the cycle number and the upper-limit stress on the evolution of cracks,pore morphology,pore number,pore volume,pore size,plane porosity,and volume porosity of salt rock were analyzed.The failure path of salt rock specimens under cyclic loading was analyzed using the distribution law of plane porosity.The damage variable of salt rock under cyclic loading was defined on basis of the variation of volume porosity with cycle number.In order to describe the fatigue deformation behavior of salt rock under cyclic loading,the nonlinear Burgers damage constitutive model was further established.The results show that the model established can better reflect the whole development process of fatigue deformation of salt rock under cyclic loading.
基金Supported by Hunan Provincial Science and Technology Department Clinical Medical Technology Innovation Guidance Project(No.2021SK50103)。
文摘AIM:To propose an algorithm for automatic detection of diabetic retinopathy(DR)lesions based on ultra-widefield scanning laser ophthalmoscopy(SLO).METHODS:The algorithm utilized the FasterRCNN(Faster Regions with CNN features)+ResNet50(Residua Network 50)+FPN(Feature Pyramid Networks)method for detecting hemorrhagic spots,cotton wool spots,exudates,and microaneurysms in DR ultra-widefield SLO.Subimage segmentation combined with a deeper residual network FasterRCNN+ResNet50 was employed for feature extraction to enhance intelligent learning rate.Feature fusion was carried out by the feature pyramid network FPN,which significantly improved lesion detection rates in SLO fundus images.RESULTS:By analyzing 1076 ultra-widefield SLO images provided by our hospital,with a resolution of 2600×2048 dpi,the accuracy rates for hemorrhagic spots,cotton wool spots,exudates,and microaneurysms were found to be 87.23%,83.57%,86.75%,and 54.94%,respectively.CONCLUSION:The proposed algorithm demonstrates intelligent detection of DR lesions in ultra-widefield SLO,providing significant advantages over traditional fundus color imaging intelligent diagnosis algorithms.
基金supported by the National Natural Science Foundation of China(Grant Nos.42277150,41977219)Henan Provincial Science and Technology Research Project(Grant No.222102320271).
文摘The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.
文摘In recent years,the Red Tourism in Central Plains has gradually become a new type of thematic tourism form,which is an important carrier to carry out patriotism and revolutionary traditional education and carry forward the national spirit.The translation of red tourism publicity is an important window for spreading Chinese culture,and the translation of professional terms is an important link in the red tourism publicity.How to spread the red culture of the Central Plains,glow the charm of the Central Plains culture,enhance the influence of the Central Plains culture,and spread the Central Plains culture to the world has become the mission of every child of the Central Plains.This paper adopts the case analysis method,combined with the specific and typical cases in“Red Central Plains”,and uses different translation strategies and methods to explore the difficulties and solutions of the translation of terms in the red tourism text.
文摘Due to growing demand and reduction of water resources and increasing pollution of water,driven by dramatic population and economic growth, arid and semi-arid land's imminent water problems are nowadays aggravating. This study aims to determine the most appropriate management strategies for balancing the Abhar plain aquifer using the SWOT coupled with AHP technique. The results indicate that weaknesses prevail over strengths as well as threats over opportunities. The placement in the quarter of weaknesses-threats with a defensive strategy indicates the critical condition of the Abhar plain aquifer. The most appropriate solutions to achieve the goal of balancing the groundwater were prioritized by AHP method. According to results, improper management of water consumption with a weight of 72.5% is the most destructive factor in reducing groundwater resources. Among the types of consumption, the effect of an agricultural factor carries a weight of 74.2%. The exploitation of illegal wells, overdraft of exploitation license provisions of wells, reduction of precipitation and traditional irrigation methods were selected as the destructive factors causing the deteriration of groundwater resources. Also, with filling the illegal wells,changing the type of cultivation and greenhouse crops cultivation, installing a smart water meter,observance the provisions of the water exploitation license, implementing integrated pressurized irrigation systems, benefiting from suitable climatic conditions and geographical location for cultivating and developing the low-water use species and industries and on the other hand, with implementing artificial recharge to control the surface water resources and reduce abstraction from groundwater aquifers, the adverse trend of Abhar Plain groundwater resources can be controlled.
基金financially supported by the National Nature Science Foundation of China(Nos.U1860206,51725402)the Science and Technology Program of Hebei,China(Nos.20311006D,20591001D)。
文摘The dissolution kinetics of Al_(2)O_(3) in CaO-Al_(2)O_(3) SiOslags was studied using a high-temperature confocal scanning laser microscope at 1773 to 1873 K.The results show that the controlling step during the Al_(2)O_(3) dissolution was the diffusionin molten slag.It was found that the dissolution curves of Al_(2)O_(3) particles were hardly agreed with the traditional boundary layer diffusion model with the increase of the CaO/Al_(2)O_(3) ratio of slag.A modified diffusion equation considering slag viscosity was developed to study the dissolution mechanism of Al_(2)O_(3) in slag.Diffusion coefficients of Al_(2)O_(3) in slag were calculated as 2.8×10to 4.1×10m~2/s at the temperature of 1773-1873 K.The dissolution rate of Al_(2)O_(3) increased with higher temperature,CaO/Al_(2)O_(3),and particle size.A new model was shown to be v_(Al_(2)O_(3))=0.16×r_(0)^(1.58)×x^(3.52)×(T-T_(mp))^(1.11)to predict the dissolution rate and the total dissolution time of Al_(2)O_(3) inclusions with various sizes,where vAl_(2)O_(3) is the dissolution rate of Al_(2)O_(3) in volume,μm^(3)/s;x is the value of CaO/Al_(2)O_(3) mass ratio;R_(0) is the initial radius of Al_(2)O_(3),μm;T is the temperature,K;T_(mp) is the melting point of slag,K.
文摘Objective: To evaluate the lung CT scan as a possible predictive diagnostic method for COVID-19 in the Cameroonian context. Methods: We designed a cross sectional study. Suspected cases of COVID-19 during the first wave at the national social insurance fund (NSIF) hospital were screened with both COVID-19 with lung CT scan and a PCR test. Univariate analysis was performed for sample description and multivariate analysis to assess the correlation between positive results for the PCR and other parameters. We estimated the optimum threshold of sensitivity/specificity, and area under curve using the empirical method and package. Results: A total of 62 suspected COVID-19 cases were recorded, predominantly males (Sex Ratio = 2.2) with a median age of 58.5 (IQR = 19.7). Among our 62 patients, 29 (46.8%) were confirmed COVID-19 cases with positive PCR results. All the patients had a thorax CT scan with a median impairment of 40% (IQR = 20%). The optimum threshold estimate for CT scan for COVID-19 infection diagnosis was 60% (95% CI = 25% - 80%). Overall, the sensitivity and specificity estimates were 0.30 (95% CI = 0.15 - 0.49) and 0.87 (95% CI = 0.70 - 0.96), respectively, leading to an Area Under Curve (AUC) estimate of 0.59 (95% CI = 0.46, 0.71). Conclusion: In this setting, lung CT scan was neither sensitive nor specific to predict COVID-19 disease.
文摘Introduction: A scanning acoustic microscope (SAM) is an apparatus for imaging acoustic properties. This apparatus can non-invasively and rapidly evaluate the hardness of materials in the elastic region. This device shows great potential for the diagnosis of dental caries in the clinical setting. However, since the tissue elastic modulus measured using a SAM is a property of the elastic region and the Knoop hardness is a property of the plastic region, the hardness properties differ completely. Therefore, we investigated whether the acoustic impedance measured using a SAM is related to the Knoop hardness, which is used as the standard for removal of carious dentin. Method: Polished sections were prepared from 20 extracted carious wisdom teeth. The acoustic impedance and Knoop hardness were measured for each section. In addition to comparing carious and healthy dentin in SAM images, we evaluated the difference between the carious and healthy dentin in terms of the acoustic impedance and Knoop hardness. We also evaluated the correlation between the Knoop hardness and acoustic impedance. Results: The SAM images were visualized as two-dimensional color images based on the acoustic impedance values. The mean acoustic impedance of carious dentin was significantly lower than that of healthy dentin, showing a similar trend as Knoop hardness. A strong correlation was observed between the two. Discussion: The acoustic impedance values obtained through acoustic microscopy differed significantly between carious and sound dentin. Both types of dentins were visualized using two-dimensional color images. A strong correlation was observed between the acoustic impedance value, which indicates the hardness of the elastic region, and the Knoop hardness, which indicates the hardness of the plastic region. The results of the present study indicate that acoustic impedance accurately reflects the hardness of dentin.
基金the framework of the SWATCH project (Prima project) funded by the DGRSDT, Algeria
文摘Infiltration is an important part of the hydrological cycle, and it is one of the main abstractions accounted for in the rainfall-runoff modeling. The main purpose of this study is to compare the infiltration models that were used to assess the infiltration rate of the Mitidja Plain in Algeria. Field infiltration tests were conducted at 40 different sites using a double ring infiltrometer. Five statistical comparison criteria including root mean squared error(RMSE), normalized root mean squared error(NRMSE), coefficient of correlation(CC), Nash-Sutcliffe efficiency(NSE), and Kling-Gupta efficiency(KGE) were used to determine the best performing infiltration model and to confirm anomalies between predicted and observed values. Then we evaluated performance of five models(i.e., the Philip model, Kostiakov model, Modified Kostiakov model, Novel model, and Horton model) in simulating the infiltration process based on the adjusted performance parameters cited above. Results indicated that the Novel model had the best simulated water infiltration process in the Mitidja Plain in Algeria. However, the Philip model was the weakest to simulate the infiltration process. The conclusion of this study can be useful for estimating infiltration rate at various sites using a Novel model when measured infiltration data are not available and are useful for planning and managing water resources in the study area.
基金the Shandong Key Research and Development Project,China(2018GNC110025)the National Natural Science Foundation of China(41871253)+2 种基金the Central Guiding Local Science and Technology Development Fund of Shandong—Yellow River Basin Collaborative Science and Technology Innovation Special Project,China(YDZX2023019)the Natural Science Foundation of Shandong Province,China(ZR2020QD016)the“Taishan Scholar”Project of Shandong Province,China(TSXZ201712)。
文摘Understanding the spatial distribution of the crop yield gap(YG)is essential for improving crop yields.Recent studies have typically focused on the site scale,which may lead to considerable uncertainties when scaled to the regional scale.To mitigate this issue,this study used a process-based and remote sensing driven crop yield model for winter wheat(PRYM-Wheat),which was derived from the boreal ecosystem productivity simulator(BEPS),to simulate the YG of winter wheat in the North China Plain from 2015 to 2019.Yield validation based on statistical yield data revealed good performance of the PRYM-Wheat Model in simulating winter wheat actual yield(Ya).The distribution of Ya across the North China Plain showed great heterogeneity,decreasing from southeast to northwest.The remote sensing-estimated results show that the average YG of the study area was 6400.6 kg ha^(–1).The YG of Jiangsu Province was the largest,at7307.4 kg ha^(–1),while the YG of Anhui Province was the smallest,at 5842.1 kg ha^(–1).An analysis of the responses of YG to environmental factors showed no obvious correlation between YG and precipitation,but there was a weak negative correlation between YG and accumulated temperature.In addition,the YG was positively correlated with elevation.In general,studying the specific features of the YG can provide directions for increasing crop yields in the future.
基金supported by Hydrogeological Survey of Songnen Plain(DD20190340)Investigation and Monitoring of Hydrogeology and Water Resources in Songliao Basin(DD20221753).
文摘The Songnen Plain is a crucial agricultural area in China,and in the past 20 years,a large number of dry fields have been developed into paddy fields in order to improve land output efficiency.As a result,the effective irrigation area of agriculture has increased annually,and the conversion mode and quantity between surface water and groundwater have changed considerably.It is essential to identify the changes in groundwater resources and their influencing factors for the sustainable development of economy and society.This study evaluates groundwater resources in the Songnen Plain using the water balance method based on meteorological,hydrological and groundwater monitoring data from 2000 to 2020.The results 3 show that the groundwater resources in the region amount to 15.945 billion m with precipitation infiltration being the most important component,accounting for 73.09%,which is followed surface water irrigation infiltration and river and ditch infiltration,constituting 14.55%and 10.32%,respectively.Different factors influence groundwater resources in different periods.Compared to 1985,the increase of surface water irrigation infiltration is the primary factor responsible for the increase of groundwater resources,while other recharge sources have decreased during the same period.Compared to 2005,all groundwater resources have increased,with the increase of surface water irrigation infiltration and river channel infiltration being the primary factors.
基金supported by the National Natural Science Foundation of China(42101382 and 41901342)the Shandong Provincial Natural Science Foundation(ZR2020QD016)the National Key Research and Development Program of China(2016YFD0300101).
文摘Accurate estimation of regional winter wheat yields is essential for understanding the food production status and ensuring national food security.However,using the existing remote sensing-based crop yield models to accurately reproduce the inter-annual and spatial variations in winter wheat yields remains challenging due to the limited ability to acquire irrigation information in water-limited regions.Thus,we proposed a new approach to approximating irrigations of winter wheat over the North China Plain(NCP),where irrigation occurs extensively during the winter wheat growing season.This approach used irrigation pattern parameters(IPPs)to define the irrigation frequency and timing.Then,they were incorporated into a newly-developed process-based and remote sensing-driven crop yield model for winter wheat(PRYM–Wheat),to improve the regional estimates of winter wheat over the NCP.The IPPs were determined using statistical yield data of reference years(2010–2015)over the NCP.Our findings showed that PRYM–Wheat with the optimal IPPs could improve the regional estimate of winter wheat yield,with an increase and decrease in the correlation coefficient(R)and root mean square error(RMSE)of 0.15(about 37%)and 0.90 t ha–1(about 41%),respectively.The data in validation years(2001–2009 and 2016–2019)were used to validate PRYM–Wheat.In addition,our findings also showed R(RMSE)of 0.80(0.62 t ha–1)on a site level,0.61(0.91 t ha–1)for Hebei Province on a county level,0.73(0.97 t ha–1)for Henan Province on a county level,and 0.55(0.75 t ha–1)for Shandong Province on a city level.Overall,PRYM–Wheat can offer a stable and robust approach to estimating regional winter wheat yield across multiple years,providing a scientific basis for ensuring regional food security.
基金supported in part by the National Key Research and Development Program of China under Grant No.2018YFB1801503National Natural Science Foundation of China under Grants No.61931006,No.82071940,No.62101111,No.U20A20212,No.61921002,and No.U1930127+1 种基金Fundamental Research Funds for the Central Universities under Grants No.ZYGX2020ZB011 and No.ZYGX2019J013Medico-Engineering Cooperation Funds from University of Electronic Science and Technology of China under Grants No.ZYGX2021YGLH205 and No.ZYGX2021YGLH216.
文摘The microwave-induced thermoacoustic imaging(TAI)technology has both the advantages of high contrast of microwave imaging and high resolution of ultrasound imaging(UI),so it has carried out exploratory application research in various areas,such as the early detection of breast tumors and cerebrovascular diseases.However,the microwave generator used in the traditional TAI technology is huge and expensive,and the temporal resolution is also too low due to the single-element scanning mechanism.Thus,it is difficult to meet the needs of clinical applications.In this paper,the iterative process and the analysis of related application scenarios from single-element scanning to portable and array-based TAI,such as the miniaturized microwave generator,handheld antenna,multi-channel data acquisition,and UI/TAIdual-modality imaging,are reviewed,and the future trends of this technology are discussed.This review helps researchers in the field of TAI learn the technological development process and future trends.It also deepens clinicians’understanding of TAI so as to put forward more application requirements.
文摘Background: The plain abdominal x-ray is one of the commonly requested investigations in the children emergency room, paediatric surgical ward and neonatal wards. The short interval required to carry out this investigative procedure and obtain results makes it the first imaging modality used to unravel the different causes of acute abdominal conditions in children. The safety of abdominal x-ray in children makes it attractive for use in paediatric surgical practice as part of routine work-up for undifferentiated acute abdominal conditions and also to diagnose specific causes of acute abdomen in children. Setting: Olabisi Onabanjo University Teaching Hospital, Sagamu, Ogun State. Objectives: Evaluation of the role of plain abdominal x-ray in diagnosing common acute abdominal conditions in children. Materials and method: Patients admitted to the children emergency room, paediatric surgical wards, children’s ward and neonatal ward who had plain abdominal x-ray as part of their diagnostic work-up were included in the study. They were studied prospectively between March 2011 and April 2021. Results: Three Hundred and Ninety-nine patients who had plain abdominal x-rays as part of their diagnostic work-up were studied. Males were 240 while females were 159, a male to female ratio of 1.5:1. The patients were aged between 1 day to 16 years. Differential diagnoses made with plain abdominal x-ray were intestinal obstruction in 298, perforated viscus 69 patients, intra-abdominal masses 13 patients and location of intra-abdominal foreign body 14. Intestinal obstruction cases in which plain abdominal x-ray played a role in their diagnosis and management included the following: intussusception 66, neonatal sepsis 60, malrotation 48, intestinal atresia 42, anorectal malformation 32, hirschsprung’s disease in 30 cases, pyloric stenosis 24, obstructed hernia 22, post-operative adhesions 16 and intestinal helminthiasis 12. Perforated viscus accounted for 69 indications. Out of these indications, perforated gut in intussusception 19, perforated typhoid ileitis was responsible in 13 cases, gut perforation in blunt abdominal trauma 8, perforation in strangulated hernia 11 cases, perforated gut in malrotation 7, ceacal perforation in hirschsprugs disease 6 and colonic perforation in necrotizing enterocolitis 5 cases. Conclusion: Plain abdominal x-ray remains a role to play in the differential diagnosis and management of common paediatric acute abdominal conditions.
