Systemically angular and planar transport investigations are performed in layered antiferromagnetic(AF)V_(5)S_(8).In this AF system,obvious anomalous Hall effect(AHE)is observed with a large Hall angle of 0.1 compared...Systemically angular and planar transport investigations are performed in layered antiferromagnetic(AF)V_(5)S_(8).In this AF system,obvious anomalous Hall effect(AHE)is observed with a large Hall angle of 0.1 compared to that in ferromagnetic(FM)system.It can persist to the temperatures above AF transition and exhibit strong angular field dependence.The phase diagram reveals various magnetic states by rotating the applied field.By analyzing the anisotropic transport behavior,magnon contributions are revealed and exhibit obvious angular dependence with a spin-flop vanishing line.The observed prominent planar Hall effect and anisotropic magnetoresisitivity exhibit two-fold systematical angular dependent oscillations.These behaviors are attributed to the scattering from spin–orbital coupling instead of nontrivial topological origin.Our results reveal anisotropic interactions of magnetism and electron in V5S8,suggesting potential opportunities for the AF spintronic sensor and devices.展开更多
Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible manipulator.The manipula...Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible manipulator.The manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse deformation.To accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation effects.By applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(AMM)is used to solve this nonlinear system of governing equations with appropriate shape functions.The assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the other.In addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is investigated.Despite the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the arm.Finally,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element approach.The comparison confirms the validity of the proposed dynamic model for the system.According to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.展开更多
Graph theory has a significant impact and is crucial in the structure of many real-life situations.To simulate uncertainty and ambiguity,many extensions of graph theoretical notions were created.Planar graphs play a v...Graph theory has a significant impact and is crucial in the structure of many real-life situations.To simulate uncertainty and ambiguity,many extensions of graph theoretical notions were created.Planar graphs play a vital role in modelling which has the property of non-crossing edges.Although crossing edges benefit,they have some drawbacks,which paved the way for the introduction of planar graphs.The overall purpose of the study is to contribute to the conceptual development of the Pythagorean Neutrosophic graph.The basic methodology of our research is the incorporation of the analogous concepts of planar graphs in the Pythagorean Neutrosophic graphs.The significant finding of our research is the introduction of Pythagorean Neutrosophic Planar graphs,a conceptual blending of Pythagorean Neutro-sophic and Planar graphs.The idea of Pythagorean Neutrosophic multigraphs and dual graphs are also introduced to deal with the ambiguous situations.This paper investigates the Pythagorean Neutrosophic planar values,which form the edges of the Pythagorean neutrosophic graphs.The concept of Pythagorean Neutrosophic dual graphs,isomorphism,co-weak and weak isomorphism have also been explored for Pythagorean Neutrosophic planar graphs.A decision-making algorithm was proposed with a numerical illustra-tion by using the Pythagorean Neutrosophic fuzzy graph.展开更多
To investigate the role of pre-twins in Mg alloy sheets during warm planar deformation, the stretch forming is conducted at 200 ℃. Results suggest the formability of the pre-twinned AZ31 Mg alloy sheet is enhanced to...To investigate the role of pre-twins in Mg alloy sheets during warm planar deformation, the stretch forming is conducted at 200 ℃. Results suggest the formability of the pre-twinned AZ31 Mg alloy sheet is enhanced to 11.30 mm. The mechanisms for the improved formability and the deformation behaviors during the planar stretch forming are systematically investigated based on the planar stress states. The Schmid factor for deformation mechanisms are calculated, the results reveal that planar stress states extremely affect the Schmid factor for {10-12}twinning. The detwinning is activated and the prismatic slip is enhanced in the pre-twinned sheet, especially under the planar extension stress state in the outer region. Consequently, the thickness-direction strain is accommodated better. The dynamic recrystallization(DRX) type is continuous DRX(CDRX) regardless of the planar stress state. However, the CDRX degree is greater under the planar extension stress state.Some twin lattices deviate from the perfect {10-12} twinning relation due to the planar compression stress state and the CDRX. The basal texture is weakened when the planar stress state tends to change the texture components.展开更多
A 5G wireless system requests a high-performance compact antenna device.This research work aims to report the characterization and verification of the artificial magnetic conductor(AMC)metamaterial for a high-gain pla...A 5G wireless system requests a high-performance compact antenna device.This research work aims to report the characterization and verification of the artificial magnetic conductor(AMC)metamaterial for a high-gain planar antenna.The configuration is formed by a double-side structure on an intrinsic dielectric slab.The 2-D periodic pattern as an impedance surface is mounted on the top surface,whereas at the bottom surface the ground plane with an inductive narrow aperture source is embedded.The characteristic of the resonant transmission is illustrated based on the electromagnetic virtual object of the AMC resonant structure to reveal the unique property of a magnetic material response.The characteristics of the AMC metamaterial and the planar antenna synthesis are investigated and verified by experiment using a low-cost FR4 dielectric material.The directional antenna gain is obviously enhanced by guiding a primary field radiation.The loss effect in a dielectric slab is essentially studied having an influence on antenna radiation.The verification shows a peak of the antenna gain around 9.7 dB at broadside which is improved by 6.2 dB in comparison with the primary aperture antenna without the AMC structure.The thin antenna profile ofλ/37.5 is achieved at 10GHz for 5Gevolution.The emission property in an AMCstructure herein contributes to the development of a lowprofile and high-gain planar antenna for a compact wireless component.展开更多
The planar Hall effect(PHE),which originates from anisotropic magnetoresistance,presents a qualitative and simple approach to characterize electronic structures of quantum materials by applying an in-plane rotating ma...The planar Hall effect(PHE),which originates from anisotropic magnetoresistance,presents a qualitative and simple approach to characterize electronic structures of quantum materials by applying an in-plane rotating magnetic field to induce identical oscillations in both longitudinal and transverse resistances.In this review,we focus on the recent research on the PHE in various quantum materials,including ferromagnetic materials,topological insulators,Weyl semimetals,and orbital anisotropic matters.Firstly,we briefly introduce the family of Hall effect and give a basic deduction of PHE formula with the second-order resistance tensor,showing the mechanism of the characteristicπ-period oscillation in trigonometric function form with aπ/4 phase delay between the longitudinal and transverse resistances.Then,we will introduce the four main mechanisms to realize PHE in quantum materials.After that,the origin of the anomalous planar Hall effect(APHE)results,of which the curve shapes deviate from that of PHE,will be reviewed and discussed.Finally,the challenges and prospects for this field of study are discussed.展开更多
This paper describes a guardring-free planar InAlAs/InGaAs avalanche photodiode(APD)by computational simulations and experimental results.The APD adopts the structure of separate absorption,charge,and multiplication(S...This paper describes a guardring-free planar InAlAs/InGaAs avalanche photodiode(APD)by computational simulations and experimental results.The APD adopts the structure of separate absorption,charge,and multiplication(SACM)with top-illuminated.Computational simulations demonstrate how edge breakdown effect is suppressed in the guardringfree structure.The fabricated APD experiment results show that it can obtain a very low dark current while achieving a high gain×bandwidth(GB)product.The dark current is 3 nA at 0.9Vb r,and the unit responsivity is 0.4 A/W.The maximum3 dB bandwidth of 24 GHz and a GB product of 360 GHz are achieved for the fabricated APD operating at 1.55μm.展开更多
Commercialization of perovskite solar cells(PSCs) requires the development of high-efficiency devices with none current density-voltage(J-V) hysteresis. Here, electron transport layers(ETLs) with gradual change in wor...Commercialization of perovskite solar cells(PSCs) requires the development of high-efficiency devices with none current density-voltage(J-V) hysteresis. Here, electron transport layers(ETLs) with gradual change in work function(WF) are successfully fabricated and employed as an ideal model to investigate the energy barriers, charge transfer and recombination kinetics at ETL/perovskite interface. The energy barrier for electron injection existing at ETL/perovskite is directly assessed by surface photovoltage microscopy, and the results demonstrate the tunable barriers have significant impact on the J-V hysteresis and performance of PSCs. By work function engineering of ETL, PSCs exhibit PCEs over 21% with negligible hysteresis. These results provide a critical understanding of the origin reason for hysteresis effect in planar PSCs, and clear reveal that the J-V hysteresis can be effectively suppressed by carefully tuning the interface features in PSCs. By extending this strategy to a modified formamidinium-cesium-rubidium(FA-Cs-Rb) perovskite system, the PCEs are further boosted to 24.18%. Moreover, 5 cm × 5 cm perovskite mini-modules are also fabricated with an impressive efficiency of 20.07%, demonstrating compatibility and effectiveness of our strategy on upscaled devices.展开更多
Although the efficiency of organic–inorganic hybrid halide perovskite solar cells has been improved rapidly, the intrinsic instability of perovskite materials restricts their commercial application. Here, an eco-frie...Although the efficiency of organic–inorganic hybrid halide perovskite solar cells has been improved rapidly, the intrinsic instability of perovskite materials restricts their commercial application. Here, an eco-friendly and low-cost organic polymer, cellulose acetate butyrate(CAB), was introduced to the grain boundaries and surfaces of perovskite, resulting in a high-quality and low-defect perovskite film with a nearly tenfold improvement in carrier lifetime. More importantly, the CAB-treated perovskite films have a well-matched energy level with the charge transport layers, thus suppressing carrier nonradiative recombination and carrier accumulation. As a result, the optimized CAB-based device achieved a champion efficiency of 21.5% compared to the control device(18.2%). Since the ester group in CAB bonds with Pb in perovskite, and the H and O in the hydroxyl group bond with the I and organic cations in perovskite,respectively, it will contribute to superior stability under heat, high humidity, and light soaking conditions. After aging under 35% humidity(relative humidity, RH) for 3300 h, the optimized device can still maintain more than 90% of the initial efficiency;it can also retain more than 90% of the initial efficiency after aging at 65 ℃, 65% RH, or light(AM 1.5G) for 500 h. This simple optimization strategy for perovskite stability could facilitate the commercial application of perovskite solar cells.展开更多
As a platform for holding Majorana zero models(MZMs),the two-dimensional planar topological Josephson junction that can be used as carriers for topological quantum computing faces some challenges.One is a combination ...As a platform for holding Majorana zero models(MZMs),the two-dimensional planar topological Josephson junction that can be used as carriers for topological quantum computing faces some challenges.One is a combination of mirror and time-reversal symmetries may make the system hold multiple pairs of MZMs.The other is that a soft gap dominated by a large momentum occurs in a clean system.To solve these problems,asymmetric junction can be introduced.Breaking this symmetry changes the symmetry class from class BDI to class D,and only a single pair of MZMs can be left at the boundary of the system.We numerically study four cases that create an asymmetric system and find out different superconducting pairing potential,different coupling coefficients between two-dimensional electron gases(2DEGs)and two superconducting bulks,different widths of two superconducting bulks make the gap of the system decrease at the optimal value,but make the gap at the minimum value increases.And the zigzag-shape quasi-one-dimensional junction eliminates the large momentum parallel to the junction and enhances the gap at the large momentum.However,the zigzag-shape junction cannot increase the gap at the region of multiple pairs of MZMs in a symmetric system.We show that by combining zigzag-shape junction with different coupling coefficients,the system can maintain a large gap(≈0.2△)in a wide region of the parameter space.展开更多
The transformer is the key circuit component of the common-mode noise current when an isolated converter is working.The highfrequency characteristics of the transformer have an important influence on the common-mode n...The transformer is the key circuit component of the common-mode noise current when an isolated converter is working.The highfrequency characteristics of the transformer have an important influence on the common-mode noise of the converter.Traditionally,the measurement method is used for transformer modeling,and a single lumped device is used to establish the transformer model,which cannot be predicted in the transformer design stage.Based on the transformer common-mode noise transmission mechanism,this paper derives the transformer common-mode equivalent capacitance under ideal conditions.According to the principle of experimental measurement of the network analyzer,the electromagnetic field finite element simulation software three-dimensional(3D)modeling and simulation method is used to obtain the two-port parameters of the transformer,extract the high-frequency parameters of the transformer,and establish its electromagnetic compatibility equivalent circuit model.Finally,an experimental prototype is used to verify the correctness of the model by comparing the experimental measurement results with the simulation prediction results.展开更多
In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of...In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of systems with a center in two zones and without equilibrium points in the other zone (or with a center in one zone and without equilibrium points in the other zones). In addition, we also give examples to illustrate that it can reach the maximal number.展开更多
就Bethuel,Brezis和Helein提出的问题讨论了Planar Ferromagnets and Antiferromagnets泛函在H={u(x)=(sinf(r)|xx|,cosf(r))∈H1(B1,S2);f(0)=0,f(1)=2π,r=|x|}中的径向极小元的一些性质,其中包括此泛函的径向极小元的零点的分布及若...就Bethuel,Brezis和Helein提出的问题讨论了Planar Ferromagnets and Antiferromagnets泛函在H={u(x)=(sinf(r)|xx|,cosf(r))∈H1(B1,S2);f(0)=0,f(1)=2π,r=|x|}中的径向极小元的一些性质,其中包括此泛函的径向极小元的零点的分布及若干个上界估计,并给出了这一问题的肯定回答.展开更多
To describe the dynamic cracking process of the CLT vertical layer,the correlation between a load-displacement curve,specimen cracking,and planar shear failure mechanism of the CLT were explored.A three-point bending ...To describe the dynamic cracking process of the CLT vertical layer,the correlation between a load-displacement curve,specimen cracking,and planar shear failure mechanism of the CLT were explored.A three-point bending test and an improved planar shear test are used to evaluate the shear performance of the CLT.In this study,the load-displacement curve is recorded,the experimental part is synchronized with the video,the dynamic process of cracking of the vertical layer is observed and analyzed throughout the test.From the load-displacement curve,the image characteristics of the initial cracking and the sudden increase of the cracking of the specimen are summar-ized.The description results of the whole dynamic process of the CLT vertical layer cracking are analyzed by pla-nar shear strength value,cracking phenomenon,and azimuth angle of cracking surface.The main conclusions show that the three-point bending test and the improved plain shear test can be used to test the plain shear strength of the CLT,with a difference of only 5.7%.The original crack and the new crack expansion account for 18.9%and 81.1%of the main cracking surface,respectively.And the vertical layer of the CLT specimen under three-point bending has three cracking morphologies,such as radial shake,ring shake,neither along with the radial shake nor along with the ring shake.The azimuth angle of the cracking surface of the CLT vertical layer under planar shear is quite consistent with the first main plane azimuth of the vertical layer of the CLT specimens under the three-point bending test and the shearing test.The shape in the cracking direction of the left half-span or the right half-span of the vertical layer of the specimen is similar to the Chinese character eight.展开更多
针对HEVC帧内预测Planar和DC模式算法的特点,提出实现这两种模式的并行化方法。该方法是通过分析推导Planar和DC模式算法之间的可并行性,以西安邮电大学自主设计的一款面向图形、图像应用的阵列处理器PAAG(Polymorphic Array Architectu...针对HEVC帧内预测Planar和DC模式算法的特点,提出实现这两种模式的并行化方法。该方法是通过分析推导Planar和DC模式算法之间的可并行性,以西安邮电大学自主设计的一款面向图形、图像应用的阵列处理器PAAG(Polymorphic Array Architecture for Graphics and Image Processing)平台为基础,采用最优的数据分配方式,合理地设计了多处理单元并行工作的算法程序。实验结果表明Planar预测模式和DC预测模式在多处理单元上的并行实现,相比于单核的串行运算速度分别提高了84%和81%,串/并行加速比分别达到6.34和5.44。该并行化算法减少了视频的编解码时间,其数据分配方案对于帧内预测算法在多核结构上的并行化研究也有一定的参考价值。展开更多
A new method for solving elasticity problems of some planar quasicrystals is presented.The set of partial differential equations for the phonon and phason displacement components is reduced to a single higher-order eq...A new method for solving elasticity problems of some planar quasicrystals is presented.The set of partial differential equations for the phonon and phason displacement components is reduced to a single higher-order equation by introducing a displacement function.A general solution formulation is suggested.As an example,the elastic field caused by a dislocation in planar quasicrystals of point groups 5 m,10,and 10mm is calculated.展开更多
基金Project supported by the open research fund of Songshan Lake Materials Laboratory(Grant No.2021SLABFN11)the National Natural Science Foundation of China(Grant Nos.U2130101 and 92165204)+5 种基金Natural Science Foundation of Guangdong Province(Grant No.2022A1515010035)Guangzhou Basic and Applied Basic Research Foundation(Grant No.202201011798)the Open Project of Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices(Grant No.2022B1212010008)the Open Project of Key Laboratory of Optoelectronic Materials and Technologies(Grant No.OEMT-2023-ZTS-01)the National Key R&D Program of China(Grant Nos.2023YFF0718400 and 2023YFA1406500)(national)college students innovation and entrepreneurship training program,Sun Yat-sen University(Grant No.202310359).
文摘Systemically angular and planar transport investigations are performed in layered antiferromagnetic(AF)V_(5)S_(8).In this AF system,obvious anomalous Hall effect(AHE)is observed with a large Hall angle of 0.1 compared to that in ferromagnetic(FM)system.It can persist to the temperatures above AF transition and exhibit strong angular field dependence.The phase diagram reveals various magnetic states by rotating the applied field.By analyzing the anisotropic transport behavior,magnon contributions are revealed and exhibit obvious angular dependence with a spin-flop vanishing line.The observed prominent planar Hall effect and anisotropic magnetoresisitivity exhibit two-fold systematical angular dependent oscillations.These behaviors are attributed to the scattering from spin–orbital coupling instead of nontrivial topological origin.Our results reveal anisotropic interactions of magnetism and electron in V5S8,suggesting potential opportunities for the AF spintronic sensor and devices.
文摘Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible manipulator.The manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse deformation.To accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation effects.By applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(AMM)is used to solve this nonlinear system of governing equations with appropriate shape functions.The assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the other.In addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is investigated.Despite the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the arm.Finally,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element approach.The comparison confirms the validity of the proposed dynamic model for the system.According to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.
基金The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through the Large Group Research Project under grant number(R.G.P.2/181/44).
文摘Graph theory has a significant impact and is crucial in the structure of many real-life situations.To simulate uncertainty and ambiguity,many extensions of graph theoretical notions were created.Planar graphs play a vital role in modelling which has the property of non-crossing edges.Although crossing edges benefit,they have some drawbacks,which paved the way for the introduction of planar graphs.The overall purpose of the study is to contribute to the conceptual development of the Pythagorean Neutrosophic graph.The basic methodology of our research is the incorporation of the analogous concepts of planar graphs in the Pythagorean Neutrosophic graphs.The significant finding of our research is the introduction of Pythagorean Neutrosophic Planar graphs,a conceptual blending of Pythagorean Neutro-sophic and Planar graphs.The idea of Pythagorean Neutrosophic multigraphs and dual graphs are also introduced to deal with the ambiguous situations.This paper investigates the Pythagorean Neutrosophic planar values,which form the edges of the Pythagorean neutrosophic graphs.The concept of Pythagorean Neutrosophic dual graphs,isomorphism,co-weak and weak isomorphism have also been explored for Pythagorean Neutrosophic planar graphs.A decision-making algorithm was proposed with a numerical illustra-tion by using the Pythagorean Neutrosophic fuzzy graph.
基金the Central Government Guided Local Science and Technology Development Projects (YDZJSX2021A010)China Postdoctoral Science Foundation (No.2022M710541)+5 种基金the National Natural Science Foundation of China (51704209,52274397,U1810208)the Projects of International Cooperation in Shanxi (201803D421086)Shanxi Province Patent Promotion Implementation Fund (20200718)Research Project Supported by Shanxi Scholarship Council of China (2022-038)Science and Technology Major Project of Shanxi Province (20191102008,20191102007,20181101008)Taishan Scholars Project Special Fund (2021)。
文摘To investigate the role of pre-twins in Mg alloy sheets during warm planar deformation, the stretch forming is conducted at 200 ℃. Results suggest the formability of the pre-twinned AZ31 Mg alloy sheet is enhanced to 11.30 mm. The mechanisms for the improved formability and the deformation behaviors during the planar stretch forming are systematically investigated based on the planar stress states. The Schmid factor for deformation mechanisms are calculated, the results reveal that planar stress states extremely affect the Schmid factor for {10-12}twinning. The detwinning is activated and the prismatic slip is enhanced in the pre-twinned sheet, especially under the planar extension stress state in the outer region. Consequently, the thickness-direction strain is accommodated better. The dynamic recrystallization(DRX) type is continuous DRX(CDRX) regardless of the planar stress state. However, the CDRX degree is greater under the planar extension stress state.Some twin lattices deviate from the perfect {10-12} twinning relation due to the planar compression stress state and the CDRX. The basal texture is weakened when the planar stress state tends to change the texture components.
基金funded by National Science,Research and Innovation Fund(NSRF)King Mongkut’s University of Technology North Bangkok with Contract No.KMUTNB-FF-65-26.
文摘A 5G wireless system requests a high-performance compact antenna device.This research work aims to report the characterization and verification of the artificial magnetic conductor(AMC)metamaterial for a high-gain planar antenna.The configuration is formed by a double-side structure on an intrinsic dielectric slab.The 2-D periodic pattern as an impedance surface is mounted on the top surface,whereas at the bottom surface the ground plane with an inductive narrow aperture source is embedded.The characteristic of the resonant transmission is illustrated based on the electromagnetic virtual object of the AMC resonant structure to reveal the unique property of a magnetic material response.The characteristics of the AMC metamaterial and the planar antenna synthesis are investigated and verified by experiment using a low-cost FR4 dielectric material.The directional antenna gain is obviously enhanced by guiding a primary field radiation.The loss effect in a dielectric slab is essentially studied having an influence on antenna radiation.The verification shows a peak of the antenna gain around 9.7 dB at broadside which is improved by 6.2 dB in comparison with the primary aperture antenna without the AMC structure.The thin antenna profile ofλ/37.5 is achieved at 10GHz for 5Gevolution.The emission property in an AMCstructure herein contributes to the development of a lowprofile and high-gain planar antenna for a compact wireless component.
基金Project supported by the National Natural Science Foundation of China(Grant No.11904015)the Fundamental Research Funds for the Central Universities(Grant No.YWF-22-K-101)the National Key R&D Program of China(Grant No.2018YFE0202700)。
文摘The planar Hall effect(PHE),which originates from anisotropic magnetoresistance,presents a qualitative and simple approach to characterize electronic structures of quantum materials by applying an in-plane rotating magnetic field to induce identical oscillations in both longitudinal and transverse resistances.In this review,we focus on the recent research on the PHE in various quantum materials,including ferromagnetic materials,topological insulators,Weyl semimetals,and orbital anisotropic matters.Firstly,we briefly introduce the family of Hall effect and give a basic deduction of PHE formula with the second-order resistance tensor,showing the mechanism of the characteristicπ-period oscillation in trigonometric function form with aπ/4 phase delay between the longitudinal and transverse resistances.Then,we will introduce the four main mechanisms to realize PHE in quantum materials.After that,the origin of the anomalous planar Hall effect(APHE)results,of which the curve shapes deviate from that of PHE,will be reviewed and discussed.Finally,the challenges and prospects for this field of study are discussed.
基金the National Key R&D Program of China(Grant No.2020YFB1805701)the National Natural Foundation of China(Grant No.61934003)。
文摘This paper describes a guardring-free planar InAlAs/InGaAs avalanche photodiode(APD)by computational simulations and experimental results.The APD adopts the structure of separate absorption,charge,and multiplication(SACM)with top-illuminated.Computational simulations demonstrate how edge breakdown effect is suppressed in the guardringfree structure.The fabricated APD experiment results show that it can obtain a very low dark current while achieving a high gain×bandwidth(GB)product.The dark current is 3 nA at 0.9Vb r,and the unit responsivity is 0.4 A/W.The maximum3 dB bandwidth of 24 GHz and a GB product of 360 GHz are achieved for the fabricated APD operating at 1.55μm.
基金supported by the National Natural Science Foundation of China (Grant No. NSFC62004182)the Career Development Grant of Institute of Chemical Materials (Grant No. STB-2021-10)the Sichuan Science and Technology Program (Grant No. 2022JDRC0021)。
文摘Commercialization of perovskite solar cells(PSCs) requires the development of high-efficiency devices with none current density-voltage(J-V) hysteresis. Here, electron transport layers(ETLs) with gradual change in work function(WF) are successfully fabricated and employed as an ideal model to investigate the energy barriers, charge transfer and recombination kinetics at ETL/perovskite interface. The energy barrier for electron injection existing at ETL/perovskite is directly assessed by surface photovoltage microscopy, and the results demonstrate the tunable barriers have significant impact on the J-V hysteresis and performance of PSCs. By work function engineering of ETL, PSCs exhibit PCEs over 21% with negligible hysteresis. These results provide a critical understanding of the origin reason for hysteresis effect in planar PSCs, and clear reveal that the J-V hysteresis can be effectively suppressed by carefully tuning the interface features in PSCs. By extending this strategy to a modified formamidinium-cesium-rubidium(FA-Cs-Rb) perovskite system, the PCEs are further boosted to 24.18%. Moreover, 5 cm × 5 cm perovskite mini-modules are also fabricated with an impressive efficiency of 20.07%, demonstrating compatibility and effectiveness of our strategy on upscaled devices.
基金supported by the National Key Research and Development Program of China (2020YFA07150002018YFB1503100)the Suzhou Fangsheng FS-300 for research support。
文摘Although the efficiency of organic–inorganic hybrid halide perovskite solar cells has been improved rapidly, the intrinsic instability of perovskite materials restricts their commercial application. Here, an eco-friendly and low-cost organic polymer, cellulose acetate butyrate(CAB), was introduced to the grain boundaries and surfaces of perovskite, resulting in a high-quality and low-defect perovskite film with a nearly tenfold improvement in carrier lifetime. More importantly, the CAB-treated perovskite films have a well-matched energy level with the charge transport layers, thus suppressing carrier nonradiative recombination and carrier accumulation. As a result, the optimized CAB-based device achieved a champion efficiency of 21.5% compared to the control device(18.2%). Since the ester group in CAB bonds with Pb in perovskite, and the H and O in the hydroxyl group bond with the I and organic cations in perovskite,respectively, it will contribute to superior stability under heat, high humidity, and light soaking conditions. After aging under 35% humidity(relative humidity, RH) for 3300 h, the optimized device can still maintain more than 90% of the initial efficiency;it can also retain more than 90% of the initial efficiency after aging at 65 ℃, 65% RH, or light(AM 1.5G) for 500 h. This simple optimization strategy for perovskite stability could facilitate the commercial application of perovskite solar cells.
基金Project supported by the National Natural Science Foundation of China(Grant No.11974271)。
文摘As a platform for holding Majorana zero models(MZMs),the two-dimensional planar topological Josephson junction that can be used as carriers for topological quantum computing faces some challenges.One is a combination of mirror and time-reversal symmetries may make the system hold multiple pairs of MZMs.The other is that a soft gap dominated by a large momentum occurs in a clean system.To solve these problems,asymmetric junction can be introduced.Breaking this symmetry changes the symmetry class from class BDI to class D,and only a single pair of MZMs can be left at the boundary of the system.We numerically study four cases that create an asymmetric system and find out different superconducting pairing potential,different coupling coefficients between two-dimensional electron gases(2DEGs)and two superconducting bulks,different widths of two superconducting bulks make the gap of the system decrease at the optimal value,but make the gap at the minimum value increases.And the zigzag-shape quasi-one-dimensional junction eliminates the large momentum parallel to the junction and enhances the gap at the large momentum.However,the zigzag-shape junction cannot increase the gap at the region of multiple pairs of MZMs in a symmetric system.We show that by combining zigzag-shape junction with different coupling coefficients,the system can maintain a large gap(≈0.2△)in a wide region of the parameter space.
文摘The transformer is the key circuit component of the common-mode noise current when an isolated converter is working.The highfrequency characteristics of the transformer have an important influence on the common-mode noise of the converter.Traditionally,the measurement method is used for transformer modeling,and a single lumped device is used to establish the transformer model,which cannot be predicted in the transformer design stage.Based on the transformer common-mode noise transmission mechanism,this paper derives the transformer common-mode equivalent capacitance under ideal conditions.According to the principle of experimental measurement of the network analyzer,the electromagnetic field finite element simulation software three-dimensional(3D)modeling and simulation method is used to obtain the two-port parameters of the transformer,extract the high-frequency parameters of the transformer,and establish its electromagnetic compatibility equivalent circuit model.Finally,an experimental prototype is used to verify the correctness of the model by comparing the experimental measurement results with the simulation prediction results.
文摘In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of systems with a center in two zones and without equilibrium points in the other zone (or with a center in one zone and without equilibrium points in the other zones). In addition, we also give examples to illustrate that it can reach the maximal number.
文摘就Bethuel,Brezis和Helein提出的问题讨论了Planar Ferromagnets and Antiferromagnets泛函在H={u(x)=(sinf(r)|xx|,cosf(r))∈H1(B1,S2);f(0)=0,f(1)=2π,r=|x|}中的径向极小元的一些性质,其中包括此泛函的径向极小元的零点的分布及若干个上界估计,并给出了这一问题的肯定回答.
文摘To describe the dynamic cracking process of the CLT vertical layer,the correlation between a load-displacement curve,specimen cracking,and planar shear failure mechanism of the CLT were explored.A three-point bending test and an improved planar shear test are used to evaluate the shear performance of the CLT.In this study,the load-displacement curve is recorded,the experimental part is synchronized with the video,the dynamic process of cracking of the vertical layer is observed and analyzed throughout the test.From the load-displacement curve,the image characteristics of the initial cracking and the sudden increase of the cracking of the specimen are summar-ized.The description results of the whole dynamic process of the CLT vertical layer cracking are analyzed by pla-nar shear strength value,cracking phenomenon,and azimuth angle of cracking surface.The main conclusions show that the three-point bending test and the improved plain shear test can be used to test the plain shear strength of the CLT,with a difference of only 5.7%.The original crack and the new crack expansion account for 18.9%and 81.1%of the main cracking surface,respectively.And the vertical layer of the CLT specimen under three-point bending has three cracking morphologies,such as radial shake,ring shake,neither along with the radial shake nor along with the ring shake.The azimuth angle of the cracking surface of the CLT vertical layer under planar shear is quite consistent with the first main plane azimuth of the vertical layer of the CLT specimens under the three-point bending test and the shearing test.The shape in the cracking direction of the left half-span or the right half-span of the vertical layer of the specimen is similar to the Chinese character eight.
文摘针对HEVC帧内预测Planar和DC模式算法的特点,提出实现这两种模式的并行化方法。该方法是通过分析推导Planar和DC模式算法之间的可并行性,以西安邮电大学自主设计的一款面向图形、图像应用的阵列处理器PAAG(Polymorphic Array Architecture for Graphics and Image Processing)平台为基础,采用最优的数据分配方式,合理地设计了多处理单元并行工作的算法程序。实验结果表明Planar预测模式和DC预测模式在多处理单元上的并行实现,相比于单核的串行运算速度分别提高了84%和81%,串/并行加速比分别达到6.34和5.44。该并行化算法减少了视频的编解码时间,其数据分配方案对于帧内预测算法在多核结构上的并行化研究也有一定的参考价值。
基金Supported by the Doctorate Station Foundation of State Educational Commission of China。
文摘A new method for solving elasticity problems of some planar quasicrystals is presented.The set of partial differential equations for the phonon and phason displacement components is reduced to a single higher-order equation by introducing a displacement function.A general solution formulation is suggested.As an example,the elastic field caused by a dislocation in planar quasicrystals of point groups 5 m,10,and 10mm is calculated.
