Plastic and polymer additives (PA) have unique rational advantages for various water and food packaging applications. However, their (bio)chemical natures are recently recognized for their negative human health impact...Plastic and polymer additives (PA) have unique rational advantages for various water and food packaging applications. However, their (bio)chemical natures are recently recognized for their negative human health impacts. The major adverse consequence of these additives in consumer products is in the form of endocrine-disruption related health-downgrades. Such findings still remain underappreciated in most parts globally;part of which could be ascribed to fragmented studies towards better understanding on the occurrence, release and migration, human exposure, epidemiology and risk assessment of PA from packaging materials. In addition there is limited and disconnected dissemination of research findings on PA effects and mitigation measures to society at present. In light of appropriateness of this topic, a trans-disciplinary research agenda is required for addressing exposure routes to PA, human health burden and prevention measures. This perspective article discusses important research questions relating to PA, which try to shed light to a grey scientific area and help increase consumers’ awareness and intervention to such exposures.展开更多
Polymeric materials from renewable resources have attracted a lot of attention in recent years. The development and utilization of vegetable oils for polymeric materials are currently in the spotlight of the polymer a...Polymeric materials from renewable resources have attracted a lot of attention in recent years. The development and utilization of vegetable oils for polymeric materials are currently in the spotlight of the polymer and chemical industry, as they are the largest renewable platform due to their universal wide availability, ingrained biodegradability, low cost, and excellent environmental aspects (i.e., low ecotoxicity and low toxicity toward humans). These excellent natural characteristics are now being taken advantage of in research and development, with vegetable oil derived polymers/polymeric materials/composites being used in numerous applications including paints and coatings, adhesives, and nanocomposites. The aim of this review paper is to give a fundamental description of the various vegetable oil applications in polymer materials and its recent developments. Particular emphasis will be placed on study and main application of triglyceride based additive for polymer and to give the reader an insight into the main developments is discussed.展开更多
The comprehensive situation of plastics industry in China in 2010 was reviewed,including output/sales and export/import of various plastics products,synthetic resins,plastics processing machinery,and additives.Some pr...The comprehensive situation of plastics industry in China in 2010 was reviewed,including output/sales and export/import of various plastics products,synthetic resins,plastics processing machinery,and additives.Some problems occurring during the development of the industry were pointed out and a few suggestions for its development during the 12th Five-year Plan period were made.展开更多
General situation of China plastics industry in 2009 was reviewed,including the output/sales and export/import of plastics products,synthetic resins,plastics processing machinery and additives.
Microplastic pollution represents a side-effect stemming from a global plastic waste mismanagement problem and includes degraded particles or mass produced plastic particles less than 5 mm in largest dimension.The sma...Microplastic pollution represents a side-effect stemming from a global plastic waste mismanagement problem and includes degraded particles or mass produced plastic particles less than 5 mm in largest dimension.The small nature of microplastics gives this area of pollution different environmental concerns than general plastic waste in the environment.The biological toxicity of particles,their internal components,and their surface level changes all present opportunities for these particles to adversely affect the environment around them.Thus,it is necessary to review the current literature surrounding this topic and identify areas where the study of microplastic can be pushed forward.Here we present current methods in studying microplastics,some of the ways by which microplastics affect the environment and attempt to shed light on how this research can continue.In addition,we review current recycling methods developing for the processing of mixed-plastic waste.These methods,including hydrothermal processing and solvent extraction,provide a unique opportunity to separate plastic waste and improve the viability of the plastics recycling industry.展开更多
Non-polar capillary columns for GC/MS are widely utilized in the analysis of additives for food contact materials. Though various kinds of non-polar capillary columns are commercially available, the equality of their ...Non-polar capillary columns for GC/MS are widely utilized in the analysis of additives for food contact materials. Though various kinds of non-polar capillary columns are commercially available, the equality of their performance has not been verified. Herein, ninety-six additives for food contact plastics were analyzed using fifteen kinds of columns, and the peak separation, retention times, and peak areas of each additive were compared. The additives, with various chemical properties, comprised forty four plasticizers, twenty lubricants, twenty antioxidants, nine ultraviolet absorbers, and three other compounds. 10 μg.mL-1 test solutions were prepared in acetone, and injected to the GC/MS. The fifteen columns were classified into five categories based on the chromatogram pattern and peak separation. To facilitate comparison of the retention time and detection sensitivity of the columns for the additives, the relative retention time (RRT) and relative peak area (RPA) were calculated by using dibutylphthalate or 4-tert-butylphenylsalicylate as an internal standard. The RRTs of the additives on each column were essentially similar. However, the RRT of the additives which were detected in the later stages differed slightly. Although the RPA of the plasticizers and lubricants were roughly similar, column-to-column differences were observed for certain additives, such as antioxidants and ultraviolet absorbers. Furthermore, certain fatty acids, antioxidants, two plasticizers, and two benzophenone type ultraviolet absorbers were not detected in the chromatograms of two columns.展开更多
文摘Plastic and polymer additives (PA) have unique rational advantages for various water and food packaging applications. However, their (bio)chemical natures are recently recognized for their negative human health impacts. The major adverse consequence of these additives in consumer products is in the form of endocrine-disruption related health-downgrades. Such findings still remain underappreciated in most parts globally;part of which could be ascribed to fragmented studies towards better understanding on the occurrence, release and migration, human exposure, epidemiology and risk assessment of PA from packaging materials. In addition there is limited and disconnected dissemination of research findings on PA effects and mitigation measures to society at present. In light of appropriateness of this topic, a trans-disciplinary research agenda is required for addressing exposure routes to PA, human health burden and prevention measures. This perspective article discusses important research questions relating to PA, which try to shed light to a grey scientific area and help increase consumers’ awareness and intervention to such exposures.
文摘Polymeric materials from renewable resources have attracted a lot of attention in recent years. The development and utilization of vegetable oils for polymeric materials are currently in the spotlight of the polymer and chemical industry, as they are the largest renewable platform due to their universal wide availability, ingrained biodegradability, low cost, and excellent environmental aspects (i.e., low ecotoxicity and low toxicity toward humans). These excellent natural characteristics are now being taken advantage of in research and development, with vegetable oil derived polymers/polymeric materials/composites being used in numerous applications including paints and coatings, adhesives, and nanocomposites. The aim of this review paper is to give a fundamental description of the various vegetable oil applications in polymer materials and its recent developments. Particular emphasis will be placed on study and main application of triglyceride based additive for polymer and to give the reader an insight into the main developments is discussed.
文摘The comprehensive situation of plastics industry in China in 2010 was reviewed,including output/sales and export/import of various plastics products,synthetic resins,plastics processing machinery,and additives.Some problems occurring during the development of the industry were pointed out and a few suggestions for its development during the 12th Five-year Plan period were made.
文摘General situation of China plastics industry in 2009 was reviewed,including the output/sales and export/import of plastics products,synthetic resins,plastics processing machinery and additives.
文摘Microplastic pollution represents a side-effect stemming from a global plastic waste mismanagement problem and includes degraded particles or mass produced plastic particles less than 5 mm in largest dimension.The small nature of microplastics gives this area of pollution different environmental concerns than general plastic waste in the environment.The biological toxicity of particles,their internal components,and their surface level changes all present opportunities for these particles to adversely affect the environment around them.Thus,it is necessary to review the current literature surrounding this topic and identify areas where the study of microplastic can be pushed forward.Here we present current methods in studying microplastics,some of the ways by which microplastics affect the environment and attempt to shed light on how this research can continue.In addition,we review current recycling methods developing for the processing of mixed-plastic waste.These methods,including hydrothermal processing and solvent extraction,provide a unique opportunity to separate plastic waste and improve the viability of the plastics recycling industry.
文摘Non-polar capillary columns for GC/MS are widely utilized in the analysis of additives for food contact materials. Though various kinds of non-polar capillary columns are commercially available, the equality of their performance has not been verified. Herein, ninety-six additives for food contact plastics were analyzed using fifteen kinds of columns, and the peak separation, retention times, and peak areas of each additive were compared. The additives, with various chemical properties, comprised forty four plasticizers, twenty lubricants, twenty antioxidants, nine ultraviolet absorbers, and three other compounds. 10 μg.mL-1 test solutions were prepared in acetone, and injected to the GC/MS. The fifteen columns were classified into five categories based on the chromatogram pattern and peak separation. To facilitate comparison of the retention time and detection sensitivity of the columns for the additives, the relative retention time (RRT) and relative peak area (RPA) were calculated by using dibutylphthalate or 4-tert-butylphenylsalicylate as an internal standard. The RRTs of the additives on each column were essentially similar. However, the RRT of the additives which were detected in the later stages differed slightly. Although the RPA of the plasticizers and lubricants were roughly similar, column-to-column differences were observed for certain additives, such as antioxidants and ultraviolet absorbers. Furthermore, certain fatty acids, antioxidants, two plasticizers, and two benzophenone type ultraviolet absorbers were not detected in the chromatograms of two columns.