The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variat...The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variation of the cylinder equivalent mass caused by the transmission ratio of clamping unit and the severe instantaneous impact force acted on the cylinder during the mold closing and opening process, an adaptive control principle of parameter and structure is proposed to improve its kinetic performance. The adaptive correlation between the acceleration feedback gain and the variable mass is derived. The pressure differential feedback is introduced to improve the dynamic performance in the case of small inertia and heavy impact load. The adaptation of sum pressure to load is used to reduce the energy loss of the system. The research results are verified by the simulation and experiment, The investigation method and the conclusions are also suitable for the differential cylinder system controlled by the traditional servo pump unit.展开更多
At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracte...At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracted the attention of numerous domestic and foreign clients. They rushed to the stand in great numbers for consultation and talks on ordering. According to the evaluation of the experts concerned, the die set is the most advanced one nationwide for PET plastic jet-moulding machinery.展开更多
The versatile plastic bottle blowing machine, developed and produced by the Anhui Tongda Science and Technology Development Corp. under the Sino-foreign joint venture Guobao Group, has been exported to Britain, Icelan...The versatile plastic bottle blowing machine, developed and produced by the Anhui Tongda Science and Technology Development Corp. under the Sino-foreign joint venture Guobao Group, has been exported to Britain, Iceland, Paraguay, Thailand, Pakistan, Bangladesh and the Commonwealth of Independent States. At an展开更多
Limiting surface soil disturbance caused by forest harvesting machines is an important task and is influenced by the selection of efficient and reliable predictors of such disturbance. Our objective was to determine w...Limiting surface soil disturbance caused by forest harvesting machines is an important task and is influenced by the selection of efficient and reliable predictors of such disturbance. Our objective was to determine whether soil moisture content affects soil load bearing capacity and the formation of ruts. Measurements were conducted in six forest stands where various machines operated. We measured the formation of ruts along skid trails in connection with varying soil moisture content. Soil moisture content was determined through the gravimetric sampling method. Our results showed that severe(rut depth16–25 cm) to very severe disturbance(rut depth [26 cm)occurred in forest stands where the instantaneous soil moisture exceeded its plasticity limits defined through Atterberg limits. Atterberg limits of soil plasticity ranged from 26 to 32 % in individual stands. Regression and correlation analysis confirmed a moderately strong relationship(R = 0.52; p / 0.05) between soil moisture content and average rut depth. This confirmed that soil moisture is a suitable and effective predictor of soil disturbance.展开更多
针对注塑机结构设计工作中对数据管理系统的需求,从优化数据管理,实现协同设计和提高设计效率的目的出发,研究了注塑机结构设计部门级产品数据库管理(Product Data Management,PDM)系统实施和综合应用。从整体上缩短了注塑机产品的开发...针对注塑机结构设计工作中对数据管理系统的需求,从优化数据管理,实现协同设计和提高设计效率的目的出发,研究了注塑机结构设计部门级产品数据库管理(Product Data Management,PDM)系统实施和综合应用。从整体上缩短了注塑机产品的开发周期。展开更多
基金This project is supported by National Natural Science Foundation of China (No.50275102)Opening Foundation of State Key Lab of Fluid Power Transmission and Control of Zhejiang University, China (No.GZKF2002004).
文摘The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variation of the cylinder equivalent mass caused by the transmission ratio of clamping unit and the severe instantaneous impact force acted on the cylinder during the mold closing and opening process, an adaptive control principle of parameter and structure is proposed to improve its kinetic performance. The adaptive correlation between the acceleration feedback gain and the variable mass is derived. The pressure differential feedback is introduced to improve the dynamic performance in the case of small inertia and heavy impact load. The adaptation of sum pressure to load is used to reduce the energy loss of the system. The research results are verified by the simulation and experiment, The investigation method and the conclusions are also suitable for the differential cylinder system controlled by the traditional servo pump unit.
文摘At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracted the attention of numerous domestic and foreign clients. They rushed to the stand in great numbers for consultation and talks on ordering. According to the evaluation of the experts concerned, the die set is the most advanced one nationwide for PET plastic jet-moulding machinery.
文摘The versatile plastic bottle blowing machine, developed and produced by the Anhui Tongda Science and Technology Development Corp. under the Sino-foreign joint venture Guobao Group, has been exported to Britain, Iceland, Paraguay, Thailand, Pakistan, Bangladesh and the Commonwealth of Independent States. At an
基金financed by a scientific grant VEGA-1/0678/14‘‘Optimization of technological,technical,economic and biological principles of energy dendromass production’’
文摘Limiting surface soil disturbance caused by forest harvesting machines is an important task and is influenced by the selection of efficient and reliable predictors of such disturbance. Our objective was to determine whether soil moisture content affects soil load bearing capacity and the formation of ruts. Measurements were conducted in six forest stands where various machines operated. We measured the formation of ruts along skid trails in connection with varying soil moisture content. Soil moisture content was determined through the gravimetric sampling method. Our results showed that severe(rut depth16–25 cm) to very severe disturbance(rut depth [26 cm)occurred in forest stands where the instantaneous soil moisture exceeded its plasticity limits defined through Atterberg limits. Atterberg limits of soil plasticity ranged from 26 to 32 % in individual stands. Regression and correlation analysis confirmed a moderately strong relationship(R = 0.52; p / 0.05) between soil moisture content and average rut depth. This confirmed that soil moisture is a suitable and effective predictor of soil disturbance.