The inert carbon–carbon(C–C) bonds cleavage is a main bottleneck in the chemical upcycling of recalcitrant polyolefin plastics waste. Here we develop an efficient strategy to catalyze the complete cleavage of C–C b...The inert carbon–carbon(C–C) bonds cleavage is a main bottleneck in the chemical upcycling of recalcitrant polyolefin plastics waste. Here we develop an efficient strategy to catalyze the complete cleavage of C–C bonds in mixed polyolefin plastics over non-noble metal catalysts under mild conditions. The nickelbased catalyst involving Ni_(2)Al_(3) phase enables the direct transformation of mixed polyolefin plastics into natural gas, and the gas carbon yield reaches up to 89.6%. Reaction pathway investigation reveals that natural gas comes from the stepwise catalytic cleavage of C–C bonds in polypropylene, and the catalyst prefers catalytic cleavage of terminal C–C bond in the side-chain with the low energy barrier.Additionally, our developed approach is evaluated by the technical economic analysis for an economically competitive production process.展开更多
As a long-term project aimed at developing super polyolefin blends, in this paper we summarize our work on themechanical reinforcement and phase morphology of polyolefin blends achieved by dynamic packing injection mo...As a long-term project aimed at developing super polyolefin blends, in this paper we summarize our work on themechanical reinforcement and phase morphology of polyolefin blends achieved by dynamic packing injection molding(DPIM). The main feature of this technology is that the specimen is forced to move repeatedly in the model by two pistonsthat move reversibly with the same frequency during cooling, which results in preferential orientation of the dispersed phaseas well as the matrix. The typical morphology of samples obtained via DPIM is a shear-induced morphology with a core inthe center, an oriented zone surrounding the core and a skin layer in the cross-section areas. Shear-induced phase dissolutionat a higher shear rate but phase separation at low shear rates is evident from AFM examination of LLDPE/PP (50/50) blends.The super polyolefin blends having high modulus (1.9-2.2 GPa), high tensile strength (100-120 MPa) and high impactstrength (6 times as that of pure HDPE) have been prepared by controlling the phase separation, molecular orientation andcrystal morphology.展开更多
Serratia marcescens strain 9986 is a producer of prodigiosin used as a dye of polyolefines (polyethylene, ultratene). The biosynthesis of pigment was closely connected with controlled growth parameters. A prodigiosin ...Serratia marcescens strain 9986 is a producer of prodigiosin used as a dye of polyolefines (polyethylene, ultratene). The biosynthesis of pigment was closely connected with controlled growth parameters. A prodigiosin yield 0.2 - 0.4 mg per l of culture medium in the batch culture under aerobic conditions was obtained. Prodigiosin was extracted from crude biomass treated by 0.1% of sodium dodecyl sulfate (SDS). This novel elaborated stage is necessary for thermostability a dye in polymer. The consumption of prodigiosin preparation is more economical in the technology of the coloration of polyolefines. The elaborated method has been manufactured for dyeing polyethylene by biological pigment-articles of the common use corresponding to the technological standard.展开更多
The morphology and properties of HDPE blends with Zn-SEPDM and GR were studied through SEM and mechanical property test. The results show that as Zn-SEPDM/GR content amounts to 20%, the blend becomes an IPN in structu...The morphology and properties of HDPE blends with Zn-SEPDM and GR were studied through SEM and mechanical property test. The results show that as Zn-SEPDM/GR content amounts to 20%, the blend becomes an IPN in structure, and that a rather high impact and tensile strength of HDPE may be obtained after blending. The antistatic effect, the softening point,and HDT of the blend are higher as compared to HDPE/Zn-SEPDM/ZnSt (zinc stearate).The effect of Zn-SEPDM on the compatibility the morphology and properties of IPP blends were studied by DSC, TEM and mechanical properties test. The results show that as Zn-SEPDM content exceeds 20%. Zn-SEPDM in the blend becomes continuous and an abrupt change in impact strength is incurred there from. Owing to the incorporation of ionic groups into EPDM.the strong interactions betWeen the chains make both the impact and the tensile strength of IPP remarkably higher展开更多
The diffusion coefficient of volatiles in polymer solutions is a crucial parameter to describe the mass transfer efficiency and ability of volatiles.In this research,polyolefin elastomer(POE)was used as a polymer,and ...The diffusion coefficient of volatiles in polymer solutions is a crucial parameter to describe the mass transfer efficiency and ability of volatiles.In this research,polyolefin elastomer(POE)was used as a polymer,and cyclohexane was used as a volatile.A gravimetric analysis was applied to measure the diffusion coefficient of cyclohexane in POE.The devolatilization rate of the POE-cyclohexane system under different conditions was measured.The effects of temperature,film sample thickness,and initial concentration of volatiles on the devolatilization rate were discussed.Based on the devolatilization rate data,the average diffusion coefficient of cyclohexane in POE was obtained by fitting with a mathematical model.The experimental results indicate that the devolatilization rate increased with increasing temperature and initial concentration of volatiles,but it decreased with increasing sample thickness.As the thickness increased,the overall diffusion resistance increased.As the temperature increased,the molecular movement increased,resulting in the increase of average diffusion coefficient.The relationship between the diffusion coefficient of the POE-cyclohexane system and temperature follows the Arrhenius law.The diffusion activation energy E=6201.73 J/mol,and the pre-exponential factor of the diffusion coefficient D0=2.64×10^(-10) m^(2)/s.This work can provide basic data for exploring the devolatilization of POE polymers and serves as a useful reference for enhancing the effect of devolatilization.展开更多
A method to quantify crazing deformations by tensile tests for polystyrene （PS） and polyolefin elastomer （POE） blends was investigated. The toughness of PS/POE blends, reflected by the Charpy impact strength, incr...A method to quantify crazing deformations by tensile tests for polystyrene （PS） and polyolefin elastomer （POE） blends was investigated. The toughness of PS/POE blends, reflected by the Charpy impact strength, increased with the content of POE. SEM micrographs showed the poor compatibility between PS and POE. In simple tensile tests, it is very easy to achieve the ratio of crazing deformation, i.e. K by measuring the size changes of samples. The K values decreased with increasing the content of POE, and the deformations of PS/POE blends were dominated by crazing. The plots of the change of volume （△V） against longitudinal variation （△I） showed a linear relationship, and the slope of lines decreased with the content of POE. Measuring samples at the tensile velocities of 5 mm/min, 50 mm/min, and 500 mm/min respectively, the K values kept unchanged for each PS/POE blends.展开更多
Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain...Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain conformation.Thisslight conformational bias is amplified cooperatively along the chain,and results in preferred chirality of the main chainhelical conformations.As a result,these polymers display a liquid-crystal(LC)phase both in solution and,in the melt as atransient phase on the way to crystallization.The existence of two processes(melt-LC and LC-crystal transitions)results inunconventional behaviors that were first analyzed by Pino and collaborators back in 1975.These polymers also offer a meansto test the structural consequences of recently introduced crystallization schemes.These schemes postulate the formation of atransient liquid-crystal phase as a general scheme for polymer crystallization.展开更多
The morphology of PE in the in-situ CB/PE composites prepared from in-situ polymerization via a catalyst-supported approach was studied by DSC. It is found that both the melting peak temperature and crystallinity of t...The morphology of PE in the in-situ CB/PE composites prepared from in-situ polymerization via a catalyst-supported approach was studied by DSC. It is found that both the melting peak temperature and crystallinity of the PE shelldecrease as filler level increases. The unexpected phenomena are ascribed to the strong interaction between PE and CB andthe very high specific area of CB. It is suggested that the lamellar thickness should be well correlated to the PE shell thickness. A two-layer PE model is successfully used to explain the experiment results.展开更多
In this communication, by means of stress relaxation experiments, the viscous stress at various strains during tensile deformation of oriented polyolefin samples including high density polyethylene （HDPE）, linear lo...In this communication, by means of stress relaxation experiments, the viscous stress at various strains during tensile deformation of oriented polyolefin samples including high density polyethylene （HDPE）, linear low density polyethylene （LLDPE） and isotactic polypropylene （iPP）, has been determined. The viscous stress in the oriented samples takes up to 50%-70% of the total stress, which is unusually high compared with their isotropic counterparts. The unusual high viscous stress was discussed based on mainly the existence of shish structure in oriented polyolefins, which could enhance the inter-lamella coupling significantly.展开更多
Recent successful examples for synthesis of new polyolefins containing (polar) functionalities by adopting the approaches by controlled incorporation of reactive functionalities (and the subsequent introduction of pol...Recent successful examples for synthesis of new polyolefins containing (polar) functionalities by adopting the approaches by controlled incorporation of reactive functionalities (and the subsequent introduction of polar functionalities under mild conditions) by coordination polymerization in the presence of transition metal complex catalysts have been described. Related methods (such as direct copolymerization of olefin with polar monomer using living radical or coordination insertion methods) have also been demonstrated for comparison. Our recent efforts for precise synthesis of polyolefins containing polar functionalities by efficient incorporation of reactive functionality by copolymerization of ethylene with nonconjugateddiene (1,7-octadiene, vinylcyclohexene etc.) or divinyl-biphenyl using nonbridged half-titanocene [ex. Cp’TiCl2(O-2,6-iPr2C6H3), Cp’ = C5Me5, tBuC5H4 etc.] catalysts have been introduced.展开更多
The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the...The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the catalytic cracking of polyethylene was about 74 kJ/mol. The cracked product was naphtha and middle distillate as the major product and gaseous hydrocarbon （C1-C4） as the minor product while little heavy oil was produced. The chemical compositions of the product were： aromatic hydrocarbons, isoparaffins and branched olefins, whereas that of the non-catalyzed products were： n-olefins and n-paraffins with minor amount of dienes with increasing the process time. Additionally, the product pattern shifted from naphtha rich product to kerosene and gas-oil rich product. However, any catalytic product showed low fluid point （〈 -10 ℃）, while that of the non-catalyzed product was as high as 40 ℃. Catalyst could process, more than 100 times by weight of polyethylene with fairly small amount （- 30 wt%） of coke deposition. Spent catalyst gave higher hydrocarbons while fresh catalyst gave gaseous product as the major product. Other polyolefins such as polypropylene and polystyrene were tested on same catalyst to show that their reactivity is higher than that of polyethylene and gave the aliphatic products, alkyl benzenes and C6-C9 iso-paraffins as the major product. Product pattern of the cracked product suggested that the reaction proceeded via the primary reactions making paraffins and olefins which were followed by the isomerization, secondary cracking, aromatization and hydrogen transfer which based on the carbenium ion mechanism.展开更多
Cyclic polyolefin (COP) is an inexpensive hydrophobic material with low auto-fluorescence, high light transmittance and thermal stability, broad chemical resistance and no non-specific protein binding. Here, the hydro...Cyclic polyolefin (COP) is an inexpensive hydrophobic material with low auto-fluorescence, high light transmittance and thermal stability, broad chemical resistance and no non-specific protein binding. Here, the hydrophobic alkane COP was modified to have carbonyl functionalities through oxygen plasma and chemical etching treatments to increase usefulness for chemical and biochemical applications. Then, biotin-hydrazide was used to create biotinylated surfaces that bound streptavidin. A biotinylated target oligonucleotide was subsequently bound to the immobilized biotin-streptavidin and ligation mediated rolling circle amplification-based (L-RCA) SNP detection was demonstrated.展开更多
The development situation of the polyolefin industry during the first four years of the Elevemth Five-year-plan was reviewed.Domestic supply and demand of polyolefins at the period of the Twelfth Five-year-plan were a...The development situation of the polyolefin industry during the first four years of the Elevemth Five-year-plan was reviewed.Domestic supply and demand of polyolefins at the period of the Twelfth Five-year-plan were analyzed and predicted.It was pointed out that production capacity of polyolefin in China will be increased significantly and market demand will keep a steady growth.Large-scale industrial equipment of polyolefin will be developed to meet the increasing demand.展开更多
Polyolefins(POs,i.e.,polyethylenes,ethylene/α-olefin copolymers,and polypropylenes)are the most ubiquitous synthetic macromolecular materials in modern life.Their widespread use and low recovery rate after extensive ...Polyolefins(POs,i.e.,polyethylenes,ethylene/α-olefin copolymers,and polypropylenes)are the most ubiquitous synthetic macromolecular materials in modern life.Their widespread use and low recovery rate after extensive usage have caused significant resource waste and environmental concerns.Chemical recycling of POs provides an efficient approach to unravelling the polymer chain to various chemicals.However,conventional chemical recycling methods,including pyrolysis,hydrocracking,and oxidation,require high-energy input(typically>500℃)and/or the use of environmentally unfriendly chemicals,leading to complex product distribution.In this minireview,based on recent representative works,we summarize and highlight catalytic strategies addressing these issues in PO recycling from two perspectives:(1)employing advanced catalysts or technique designs to overcome the challenges in conventional chemical deconstruction approaches;and(2)developing novel tandem/cascade catalytic systems for highly selective PO upcycling under relatively mild conditions.We hope that this minireview will help researchers better understand the state of the art of PO chemical recycling and inspire more innovative and efficient ideas for this fast-developing field.展开更多
Under optimal process conditions,pyrolysis of polyolefins can yield ca.90 wt%of liquid product,i.e.,combination of light oil fraction and heavier wax.In this work,the experimental findings reported in a selected group...Under optimal process conditions,pyrolysis of polyolefins can yield ca.90 wt%of liquid product,i.e.,combination of light oil fraction and heavier wax.In this work,the experimental findings reported in a selected group of publications concerning the non-catalytic pyrolysis of polyolefins were collected,reviewed,and compared with the ones obtained in a continuously operated bench-scale pyrolysis reactor.Optimized process parameters were used for the pyrolysis of waste and virgin counterparts of high-density polyethylene,low-density polyethylene,polypropylene and a defined mixture of those(i.e.,25:25:50 wt%,respectively).To mitigate temperature drops and enhance heat transfer,an increased feed intake is employed to create a hot melt plastic pool.With 1.5 g·min^(-1) feed intake,1.1 L·min^(-1) nitrogen flow rate,and a moderate pyrolysis temperature of 450℃,the formation of light hydrocarbons was favored,while wax formation was limited for polypropylene-rich mixtures.Pyrolysis of virgin plastics yielded more liquid(maximum 73.3 wt%)than that of waste plastics(maximum 66 wt%).Blending polyethylenes with polypropylene favored the production of liquids and increased the formation of gasoline-range hydrocarbons.Gas products were mainly composed of C3 hydrocarbons,and no hydrogen production was detected due to moderate pyrolysis temperature.展开更多
Polyolefin vitrimers are polymer networks bearing reversible covalent crosslinking points, enabling them to be reprocessed and recycled. In this contribution, a series of polyolefin vitrimers were designed based on th...Polyolefin vitrimers are polymer networks bearing reversible covalent crosslinking points, enabling them to be reprocessed and recycled. In this contribution, a series of polyolefin vitrimers were designed based on the acetoacetate-functionalized polyolefin copolymers, which were produced through the direct copolymerization of ethylene with polar comonomers using a phosphinesulfonate palladium catalyst. The pendant acetoacetate group could mediate several characteristic reactions, such as the Michael addition reaction, ketone-amine condensation and metal coordination reaction. As such, structurally adjustable polyolefin vitrimers can be accessed by introducing various dynamic crosslinking bonds, including disulfide exchange, transamination of vinylogous urethane and labile metal coordination bond. The utilization of different crosslinking reactions and the mole ratio of crosslinkers significantly impact the material properties of the resultant polymers. Specifically, the generated polyolefin vitrimers demonstrated excellent reprocessability and closed-loop recycling properties. The study in this work provides an efficient strategy to access various polyolefin vitrimers.展开更多
基金supported by the National Natural Science Foundation of China (grant 22208339)the China Postdoctoral Science Foundation (2021M693132)+2 种基金the National Key R&D Program of China (2019YFC1905303)the Doctoral Scientific Research Foundation of Liaoning Province (2021-BS-006)the Youth Innovation Fund of Dalian Institute of Chemical Physics (DICP I202132)。
文摘The inert carbon–carbon(C–C) bonds cleavage is a main bottleneck in the chemical upcycling of recalcitrant polyolefin plastics waste. Here we develop an efficient strategy to catalyze the complete cleavage of C–C bonds in mixed polyolefin plastics over non-noble metal catalysts under mild conditions. The nickelbased catalyst involving Ni_(2)Al_(3) phase enables the direct transformation of mixed polyolefin plastics into natural gas, and the gas carbon yield reaches up to 89.6%. Reaction pathway investigation reveals that natural gas comes from the stepwise catalytic cleavage of C–C bonds in polypropylene, and the catalyst prefers catalytic cleavage of terminal C–C bond in the side-chain with the low energy barrier.Additionally, our developed approach is evaluated by the technical economic analysis for an economically competitive production process.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 29992535) and the China National Distinguished Young Investigator Fund.
文摘As a long-term project aimed at developing super polyolefin blends, in this paper we summarize our work on themechanical reinforcement and phase morphology of polyolefin blends achieved by dynamic packing injection molding(DPIM). The main feature of this technology is that the specimen is forced to move repeatedly in the model by two pistonsthat move reversibly with the same frequency during cooling, which results in preferential orientation of the dispersed phaseas well as the matrix. The typical morphology of samples obtained via DPIM is a shear-induced morphology with a core inthe center, an oriented zone surrounding the core and a skin layer in the cross-section areas. Shear-induced phase dissolutionat a higher shear rate but phase separation at low shear rates is evident from AFM examination of LLDPE/PP (50/50) blends.The super polyolefin blends having high modulus (1.9-2.2 GPa), high tensile strength (100-120 MPa) and high impactstrength (6 times as that of pure HDPE) have been prepared by controlling the phase separation, molecular orientation andcrystal morphology.
文摘Serratia marcescens strain 9986 is a producer of prodigiosin used as a dye of polyolefines (polyethylene, ultratene). The biosynthesis of pigment was closely connected with controlled growth parameters. A prodigiosin yield 0.2 - 0.4 mg per l of culture medium in the batch culture under aerobic conditions was obtained. Prodigiosin was extracted from crude biomass treated by 0.1% of sodium dodecyl sulfate (SDS). This novel elaborated stage is necessary for thermostability a dye in polymer. The consumption of prodigiosin preparation is more economical in the technology of the coloration of polyolefines. The elaborated method has been manufactured for dyeing polyethylene by biological pigment-articles of the common use corresponding to the technological standard.
文摘The morphology and properties of HDPE blends with Zn-SEPDM and GR were studied through SEM and mechanical property test. The results show that as Zn-SEPDM/GR content amounts to 20%, the blend becomes an IPN in structure, and that a rather high impact and tensile strength of HDPE may be obtained after blending. The antistatic effect, the softening point,and HDT of the blend are higher as compared to HDPE/Zn-SEPDM/ZnSt (zinc stearate).The effect of Zn-SEPDM on the compatibility the morphology and properties of IPP blends were studied by DSC, TEM and mechanical properties test. The results show that as Zn-SEPDM content exceeds 20%. Zn-SEPDM in the blend becomes continuous and an abrupt change in impact strength is incurred there from. Owing to the incorporation of ionic groups into EPDM.the strong interactions betWeen the chains make both the impact and the tensile strength of IPP remarkably higher
基金The authors wish to express their thanks for the financial support from the Polyolefin Elastomer Technology Development project(2020B-2619).
文摘The diffusion coefficient of volatiles in polymer solutions is a crucial parameter to describe the mass transfer efficiency and ability of volatiles.In this research,polyolefin elastomer(POE)was used as a polymer,and cyclohexane was used as a volatile.A gravimetric analysis was applied to measure the diffusion coefficient of cyclohexane in POE.The devolatilization rate of the POE-cyclohexane system under different conditions was measured.The effects of temperature,film sample thickness,and initial concentration of volatiles on the devolatilization rate were discussed.Based on the devolatilization rate data,the average diffusion coefficient of cyclohexane in POE was obtained by fitting with a mathematical model.The experimental results indicate that the devolatilization rate increased with increasing temperature and initial concentration of volatiles,but it decreased with increasing sample thickness.As the thickness increased,the overall diffusion resistance increased.As the temperature increased,the molecular movement increased,resulting in the increase of average diffusion coefficient.The relationship between the diffusion coefficient of the POE-cyclohexane system and temperature follows the Arrhenius law.The diffusion activation energy E=6201.73 J/mol,and the pre-exponential factor of the diffusion coefficient D0=2.64×10^(-10) m^(2)/s.This work can provide basic data for exploring the devolatilization of POE polymers and serves as a useful reference for enhancing the effect of devolatilization.
文摘A method to quantify crazing deformations by tensile tests for polystyrene （PS） and polyolefin elastomer （POE） blends was investigated. The toughness of PS/POE blends, reflected by the Charpy impact strength, increased with the content of POE. SEM micrographs showed the poor compatibility between PS and POE. In simple tensile tests, it is very easy to achieve the ratio of crazing deformation, i.e. K by measuring the size changes of samples. The K values decreased with increasing the content of POE, and the deformations of PS/POE blends were dominated by crazing. The plots of the change of volume （△V） against longitudinal variation （△I） showed a linear relationship, and the slope of lines decreased with the content of POE. Measuring samples at the tensile velocities of 5 mm/min, 50 mm/min, and 500 mm/min respectively, the K values kept unchanged for each PS/POE blends.
文摘Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain conformation.Thisslight conformational bias is amplified cooperatively along the chain,and results in preferred chirality of the main chainhelical conformations.As a result,these polymers display a liquid-crystal(LC)phase both in solution and,in the melt as atransient phase on the way to crystallization.The existence of two processes(melt-LC and LC-crystal transitions)results inunconventional behaviors that were first analyzed by Pino and collaborators back in 1975.These polymers also offer a meansto test the structural consequences of recently introduced crystallization schemes.These schemes postulate the formation of atransient liquid-crystal phase as a general scheme for polymer crystallization.
文摘The morphology of PE in the in-situ CB/PE composites prepared from in-situ polymerization via a catalyst-supported approach was studied by DSC. It is found that both the melting peak temperature and crystallinity of the PE shelldecrease as filler level increases. The unexpected phenomena are ascribed to the strong interaction between PE and CB andthe very high specific area of CB. It is suggested that the lamellar thickness should be well correlated to the PE shell thickness. A two-layer PE model is successfully used to explain the experiment results.
基金This work was financially supported by the National Natural Science Foundation of China (Nos. 20404008, 50533050 and 20490220)This work was subsidized by the Special Funds for Major State Basic Research Projects of China (No. 2003CB615600).
文摘In this communication, by means of stress relaxation experiments, the viscous stress at various strains during tensile deformation of oriented polyolefin samples including high density polyethylene （HDPE）, linear low density polyethylene （LLDPE） and isotactic polypropylene （iPP）, has been determined. The viscous stress in the oriented samples takes up to 50%-70% of the total stress, which is unusually high compared with their isotropic counterparts. The unusual high viscous stress was discussed based on mainly the existence of shish structure in oriented polyolefins, which could enhance the inter-lamella coupling significantly.
文摘Recent successful examples for synthesis of new polyolefins containing (polar) functionalities by adopting the approaches by controlled incorporation of reactive functionalities (and the subsequent introduction of polar functionalities under mild conditions) by coordination polymerization in the presence of transition metal complex catalysts have been described. Related methods (such as direct copolymerization of olefin with polar monomer using living radical or coordination insertion methods) have also been demonstrated for comparison. Our recent efforts for precise synthesis of polyolefins containing polar functionalities by efficient incorporation of reactive functionality by copolymerization of ethylene with nonconjugateddiene (1,7-octadiene, vinylcyclohexene etc.) or divinyl-biphenyl using nonbridged half-titanocene [ex. Cp’TiCl2(O-2,6-iPr2C6H3), Cp’ = C5Me5, tBuC5H4 etc.] catalysts have been introduced.
文摘The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the catalytic cracking of polyethylene was about 74 kJ/mol. The cracked product was naphtha and middle distillate as the major product and gaseous hydrocarbon （C1-C4） as the minor product while little heavy oil was produced. The chemical compositions of the product were： aromatic hydrocarbons, isoparaffins and branched olefins, whereas that of the non-catalyzed products were： n-olefins and n-paraffins with minor amount of dienes with increasing the process time. Additionally, the product pattern shifted from naphtha rich product to kerosene and gas-oil rich product. However, any catalytic product showed low fluid point （〈 -10 ℃）, while that of the non-catalyzed product was as high as 40 ℃. Catalyst could process, more than 100 times by weight of polyethylene with fairly small amount （- 30 wt%） of coke deposition. Spent catalyst gave higher hydrocarbons while fresh catalyst gave gaseous product as the major product. Other polyolefins such as polypropylene and polystyrene were tested on same catalyst to show that their reactivity is higher than that of polyethylene and gave the aliphatic products, alkyl benzenes and C6-C9 iso-paraffins as the major product. Product pattern of the cracked product suggested that the reaction proceeded via the primary reactions making paraffins and olefins which were followed by the isomerization, secondary cracking, aromatization and hydrogen transfer which based on the carbenium ion mechanism.
文摘Cyclic polyolefin (COP) is an inexpensive hydrophobic material with low auto-fluorescence, high light transmittance and thermal stability, broad chemical resistance and no non-specific protein binding. Here, the hydrophobic alkane COP was modified to have carbonyl functionalities through oxygen plasma and chemical etching treatments to increase usefulness for chemical and biochemical applications. Then, biotin-hydrazide was used to create biotinylated surfaces that bound streptavidin. A biotinylated target oligonucleotide was subsequently bound to the immobilized biotin-streptavidin and ligation mediated rolling circle amplification-based (L-RCA) SNP detection was demonstrated.
文摘The development situation of the polyolefin industry during the first four years of the Elevemth Five-year-plan was reviewed.Domestic supply and demand of polyolefins at the period of the Twelfth Five-year-plan were analyzed and predicted.It was pointed out that production capacity of polyolefin in China will be increased significantly and market demand will keep a steady growth.Large-scale industrial equipment of polyolefin will be developed to meet the increasing demand.
基金support for this research by the National Key R&D Program of China(grant no.2021YFA1501700)the National Natural Science Foundation of China(grant nos.21825109,21821002,22072178,22293013,and 22272114)+1 种基金the CAS Youth Interdisciplinary Team(grant no.JCTD-2021-11)the Fundamental Research Funds from Sichuan University(grant no.2022SCUNL103)is gratefully acknowledged.
文摘Polyolefins(POs,i.e.,polyethylenes,ethylene/α-olefin copolymers,and polypropylenes)are the most ubiquitous synthetic macromolecular materials in modern life.Their widespread use and low recovery rate after extensive usage have caused significant resource waste and environmental concerns.Chemical recycling of POs provides an efficient approach to unravelling the polymer chain to various chemicals.However,conventional chemical recycling methods,including pyrolysis,hydrocracking,and oxidation,require high-energy input(typically>500℃)and/or the use of environmentally unfriendly chemicals,leading to complex product distribution.In this minireview,based on recent representative works,we summarize and highlight catalytic strategies addressing these issues in PO recycling from two perspectives:(1)employing advanced catalysts or technique designs to overcome the challenges in conventional chemical deconstruction approaches;and(2)developing novel tandem/cascade catalytic systems for highly selective PO upcycling under relatively mild conditions.We hope that this minireview will help researchers better understand the state of the art of PO chemical recycling and inspire more innovative and efficient ideas for this fast-developing field.
基金supported by an Institutional Links (Grant No.527641843)under the Türkiye partnershipfunded by the UK Department for Business,Energy and Industrial Strategy together with the Scientific and Technological Research Council of Türkiye (TÜBİTAK,Project No.119N302)and delivered by the British Council.
文摘Under optimal process conditions,pyrolysis of polyolefins can yield ca.90 wt%of liquid product,i.e.,combination of light oil fraction and heavier wax.In this work,the experimental findings reported in a selected group of publications concerning the non-catalytic pyrolysis of polyolefins were collected,reviewed,and compared with the ones obtained in a continuously operated bench-scale pyrolysis reactor.Optimized process parameters were used for the pyrolysis of waste and virgin counterparts of high-density polyethylene,low-density polyethylene,polypropylene and a defined mixture of those(i.e.,25:25:50 wt%,respectively).To mitigate temperature drops and enhance heat transfer,an increased feed intake is employed to create a hot melt plastic pool.With 1.5 g·min^(-1) feed intake,1.1 L·min^(-1) nitrogen flow rate,and a moderate pyrolysis temperature of 450℃,the formation of light hydrocarbons was favored,while wax formation was limited for polypropylene-rich mixtures.Pyrolysis of virgin plastics yielded more liquid(maximum 73.3 wt%)than that of waste plastics(maximum 66 wt%).Blending polyethylenes with polypropylene favored the production of liquids and increased the formation of gasoline-range hydrocarbons.Gas products were mainly composed of C3 hydrocarbons,and no hydrogen production was detected due to moderate pyrolysis temperature.
基金supported by the National Natural Science Foundation of China (21971230, U19B6001)the Natural Science Foundation of Anhui Province (2308085Y35, 2023AH030002)+1 种基金the Hefei Natural Science Foundation (202304)the strong support from Professor Changle Chen (University of Science and Technology of China)。
文摘Polyolefin vitrimers are polymer networks bearing reversible covalent crosslinking points, enabling them to be reprocessed and recycled. In this contribution, a series of polyolefin vitrimers were designed based on the acetoacetate-functionalized polyolefin copolymers, which were produced through the direct copolymerization of ethylene with polar comonomers using a phosphinesulfonate palladium catalyst. The pendant acetoacetate group could mediate several characteristic reactions, such as the Michael addition reaction, ketone-amine condensation and metal coordination reaction. As such, structurally adjustable polyolefin vitrimers can be accessed by introducing various dynamic crosslinking bonds, including disulfide exchange, transamination of vinylogous urethane and labile metal coordination bond. The utilization of different crosslinking reactions and the mole ratio of crosslinkers significantly impact the material properties of the resultant polymers. Specifically, the generated polyolefin vitrimers demonstrated excellent reprocessability and closed-loop recycling properties. The study in this work provides an efficient strategy to access various polyolefin vitrimers.
