Antistatic polymer fibers were investigated by using carbon nanotubes (CNTs) to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is in...Antistatic polymer fibers were investigated by using carbon nanotubes (CNTs) to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is indicated that the antistatic ability of the fibers filled with composite antistatic agents that contain CNTs and organic antistatic agents was superior to that of the fibers filled either with pure organic antistatic agents or pure CNTs. The antistatic ability of the composite antistatic agent fabricated by an in situ process was superior to that of the composite antistatic agent fabricated by direct dispersing CNTs in the antistatic agent carrier. Moreover, the heat-treated CNTs could further enhance the antistatic effect compared with the initial CNTs. The antistatic effect is significantly influenced by the content of CNTs in the composite antistatic agent.展开更多
A sensitive electroanalytical method for quantification of pheniramine in pharmaceutical formulation has been investigated on the basis of the enhanced electrochemical response at glassy carbon electrode modified with...A sensitive electroanalytical method for quantification of pheniramine in pharmaceutical formulation has been investigated on the basis of the enhanced electrochemical response at glassy carbon electrode modified with multi-walled carbon nanotubes in the presence of sodium lauryl sulfate. The experimental results suggest that the pheniramine in anionic surfactant solution exhibits electrocatalytic effect resulting in a marked enhancement of the peak current response. Peak current response is linearly dependent on the concentration of pheniramine in the range 2001500 mg/mL with correlation coefficient 0.9987. The limit of detection is 58.31 mg/mL. The modified electrode shows good sensitivity and repeatability.展开更多
Polypropylene (PP)/multi-walled carbon nanotube (MWCNT)/calcium carbonate (CaCO3) composites are prepared by melt mixing using two types of CaCO3 of different sizes. The electrical resistivities of the composites with...Polypropylene (PP)/multi-walled carbon nanotube (MWCNT)/calcium carbonate (CaCO3) composites are prepared by melt mixing using two types of CaCO3 of different sizes. The electrical resistivities of the composites with the two types of CaCO3 are all lower than those of the corresponding PP/MWCNT composites at various MWCNT loadings (1 wt%-5 wt%). The morphology of the composites is investigated by field emission scanning electron microscopy (FESEM). The crystallization behavior of PP in the composites is characterized by differential scanning calorimetry (DSC). The storage modulus, as measured by dynamic mechanical analysis (DMA), increases significantly by the presence of CaCO3.展开更多
Solvent-free nanofluids hold promise for many technologically significant applications.The liquid-like behavior,a typical rheological property of solvent-free nanofluids,has aroused considerable interests.However,ther...Solvent-free nanofluids hold promise for many technologically significant applications.The liquid-like behavior,a typical rheological property of solvent-free nanofluids,has aroused considerable interests.However,there has been still lack of efficient methods to predict and control the liquid-like behavior of solvent-free nanofluids.In this paper,we propose a semi-discrete dynamic system with stochastic excitation describing the temperature change effects on the rheological property of multiwall carbon nanotubes(MWCNTs)modified by grafting sulfonic acid terminated organosilanes as corona and tertiary amine as canopy,which is a typical covalent-type solvent-free nanofluid system.The vibration of the grafting branches is simulated by employing a structure-preserving approach,and the shear force of grafting branches at the fixed end is computed subsequently.By taking the shear forces as an excitation acting on the MWCNTs,the axial motion of the MWCNTs is solved with the 7-point Gauss-Kronrod quadrature rule.The critical temperature associated with the appearance of the liquid-like behavior as well as the upper bound of the moving speed of the modified MWCNTs is determined,which can be used to predict and control the liquid-like behavior of the modified MWCNTs in engineering applications.展开更多
A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electroca...A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electrocatalytic oxidation of 6-mercaptopurine(6-MP). The CME can be used as the working electrode in the liquid chromatography for the determination of 6-MP. The peak current of 6-MP is linearly changed with its concentration ranging from 4.0×10 -7 to 1.0×10 -4 mol/L with the calculated detection limit (S/N=3) of 2.0×10 -7 mol/L. Coupled with microdialysis sampling, the method has been successfully applied to assessing the content of 6-MP in rat blood.展开更多
The electrocatalytic oxidation of nitric oxide(NO) at a glass carbon electrode(GC) modified with functionalized single-walled carbon nanotubes(SWCNTs) was investigated by cyclic voltammetry(CV) and electrochemical imp...The electrocatalytic oxidation of nitric oxide(NO) at a glass carbon electrode(GC) modified with functionalized single-walled carbon nanotubes(SWCNTs) was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS).It was found that the SWCNT modified electrode could speed greatly up the electron transfer rate compared with the bare GC electrode.After the SWCNT was treated with alkali or mixed acids,the reaction rate and activation energy of NO electrooxidation were changed to different extent.Chemical modification of the SWCNT surface is one of the most powerful methods to change the sensitivity of NO electrooxidation reaction.The modified electrode with SWCNT obtained by the firstly alkali treatment and then the mixed acids treatment was the best one for NO electrooxidation,the result of CV was also confirmed by that of EIS.The anodic processes of NO were recognized more clearly by exploring the reaction mechanism of NO electrooxidation at the SWCNT modified electrode.展开更多
Single wall carbon nanotube modified glassy carbon electrode (SWCNT/GCE) was used for flow-injection analysis (FIA) for phenolic compounds (phenol (P), 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorphen...Single wall carbon nanotube modified glassy carbon electrode (SWCNT/GCE) was used for flow-injection analysis (FIA) for phenolic compounds (phenol (P), 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorphenol (TCP) and pentachlorophenol (PCP)). Experimental variables such as the detection potential, flow rate and pH of the carrier solution, 0.1 M sodium acetate, were optimized. Under these conditions, the designed electrode showed a very good performance for the amperometric measurements, with no need to apply a cleaning or pre-treatment procedure. The operational stability was tested with 20 repetitive injections of each analyte and was found to be good. The analytical performance of the SWCNT/GCE electrode under flow through conditions was tested and was found to be impressive. When it is compared with other enzymatic and non-enzymatic sensors, it shows wider dynamic range for the detection of phenolic compounds with low limits of detection. These results suggest that the method is quite useful for monitoring and analyzing phenols and chlorophenols.展开更多
We found carbon nanotube (CNT) materials by the pyrolysis of the composite film of poly (vinyl alcohol) (PVA) reinforced with modified fly ash (FA) at 500°C for 10 min under 2 L/min flow of nitrogen. Fly ash was ...We found carbon nanotube (CNT) materials by the pyrolysis of the composite film of poly (vinyl alcohol) (PVA) reinforced with modified fly ash (FA) at 500°C for 10 min under 2 L/min flow of nitrogen. Fly ash was treated with 2M sodium hydroxide and used with PVA to fabricate the composite film by aqua casting. CNT materials were analyzed using XPS, Raman, SEM and TEM. The admixtures of CNT materials and FA are a potential filler material for fabricating composites with polymer and metal. The process is an eco-friendly recycling paradigm for using value-added advanced products for the proper management of sustainable waste materials, plastic and FA.展开更多
Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. S...Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0). The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.展开更多
The electrochemical behavior of epinephrine at activated glassy carbon electrode and carbon nanotube-coated glassy carbon electrode was studied. Epinephrine could exhibit an anodic peak at about 0.2 V (vs. SCE) at bar...The electrochemical behavior of epinephrine at activated glassy carbon electrode and carbon nanotube-coated glassy carbon electrode was studied. Epinephrine could exhibit an anodic peak at about 0.2 V (vs. SCE) at bare glassy carbon electrode, but it was very small. However, when the electrode was activated at certain potential (i.e. 1.9 V) or modified with carbon nanotube, the peak became more sensitive, resulting from the increase in electrode area in addition to the electrostatic attraction. Under the selected conditions, the anodic peak current was linear to epinephrine concentration in the range of 3.3×10^-7-1.1×10^-5 mol/L at activated glassy carbon electrode and in the range of 1.0×10^-6-5.0×10^-5 mol/L at carbon nanotube-coated electrode. The correlation coefficients were 0.998 and 0.997, respectively. The determination limit was 1.0×10^-7 mol/L. The two electrodes have been successfully applied for the determination of epinephrine in adrenaline hydrochloride injection with recovery of 95%-104%.展开更多
The electrochemistry of xanthinol nicotinate(Xan) was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes(MWNTs) and room-temperature ionic liquid of 1...The electrochemistry of xanthinol nicotinate(Xan) was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes(MWNTs) and room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate(BMTMPF_6).The modified electrode exhibited good promotion to the electrochemical oxidation of Xan and an ultrasensitive electrochemical method was proposed for the determination of Xan.This method was successfully applied to the determination of Xan in Xan tablets.展开更多
Artificial lung membranes as the core module of the extracorporeal membrane oxygenation technology(ECMO)execute the function of extracorporeal blood-gas barrier accomplishing CO_(2)/O_(2)exchange with blood.However,th...Artificial lung membranes as the core module of the extracorporeal membrane oxygenation technology(ECMO)execute the function of extracorporeal blood-gas barrier accomplishing CO_(2)/O_(2)exchange with blood.However,the unsatisfactory hemocompatibility and difficulty in functionalization are the promi-nent challenges faced by current artificial lung membrane materials.In this study,polyethersulfone(PES)composite membranes with self-anticoagulant property and high gas exchange efficient are fabricated by blending PES matrix with poly(vinylamine)(PVAm)modified carboxylic carbon nanotubes(mCNTs)and citrate-based poly(octamethylene-citrate)(POC)pre-polymers.The mCNTs construct specific gas transfer channels within the composite membranes to enhance the gas permeability,while the POC pre-polymers provide anticoagulant property based on the chelation to blood Ca^(2+)and the inactivation effect to in-trinsic coagulation factors.Importantly,directed by the actual ECMO gas exchange mode,we design a gas-liquid convectional circulation device that could evaluate gas exchange efficiency for the composite membranes under mimetic ECMO state.Therefore,this strategy not only proposes a new design method of advanced artificial lung membranes to solve the practical challenges in the current ECMO technology,but also establishes a scientific testing method to evaluate the gas exchange performance for new-type artificial lung membrane materials in the future.展开更多
Improving the performance of anode is a crucial step for increasing output power of marine sediment microbial fuel cells(MSMFCs)to drive marine monitor to work for a long term on the ocean floor.A pyrolyzed iron phtha...Improving the performance of anode is a crucial step for increasing output power of marine sediment microbial fuel cells(MSMFCs)to drive marine monitor to work for a long term on the ocean floor.A pyrolyzed iron phthalocyanine modified multi-walled carbon nanotubes composite(FePc/MWCNTs)has been utilized as a novel nodified anode in the MSMFC.Its structure of the composite modified anode and electrochemical performance have been investigated respectively in the paper.There is a substantial improvement in electron-transfer efficiency from the bacteria biofilm to the modified anode via the pyrolyzed FePc/MWCNTs composite based on their cyclic voltammetry(CV)and Tafel curves.The electron transfer kinetic activity of the FePc/MWCNTs-modified anode is 1.86 times higher than of the unmodified anode.The maximum power density of the modified MSMFC was 572.3±14 m W m^-2,which is 2.6 times larger than the unmodified one(218.3±11 m W m^-2).The anodic structure and cell scale would be greatly minimized to obtain the same output power by the modified MSMFC,so that it will make the MSMFC to be easily deployed on the remote ocean floor.Therefore,it would have a great significance for us to design a novel and renewable long term power source.Finally,a novel molecular synergetic mechanism is proposed to elucidate its excellent electrochemical performance.展开更多
The sintering of Pt nanoparticles is one of the main reasons for catalyst deactivation during the high-temperature propane dehydrogenation(PDH) reaction. Promoters and supports have been introduced to prolong the cata...The sintering of Pt nanoparticles is one of the main reasons for catalyst deactivation during the high-temperature propane dehydrogenation(PDH) reaction. Promoters and supports have been introduced to prolong the catalyst life.However, it is still necessary to develop novel catalysts with robust stability. Herein, the phosphorus-modified carbon nanotube-supported Pt nanoparticles were employed for the PDH process. Phosphorus modification improves the Pt dispersion, effectively promoting the activity of Pt/P-CNTs. Additionally, the phosphorus-modified CNTs can interact strongly with Pt nanoparticles by improving the electron transfer or hybridization, stabilizing Pt nanoparticles from agglomeration, and significantly enhancing the catalyst stability.展开更多
The electrochemical behaviors of lomefloxacin at a single-wall carbon nanotube-modified glassy carbon electrode have been investigated by cyclic voltammetry.In a Britton-Robinson buffer (pH 4.5),lomefloxacin yields a ...The electrochemical behaviors of lomefloxacin at a single-wall carbon nanotube-modified glassy carbon electrode have been investigated by cyclic voltammetry.In a Britton-Robinson buffer (pH 4.5),lomefloxacin yields a sensitive and well-defined oxidation peak at ca.1.24 V (vs.SCE) on the modified electrode.Compared with the bare glassy carbon electrode,the oxidation peak current of lomefloxacin significantly increases and the oxidation peak potential positively shifts.Under the optimal conditions,the interaction of lomefloxacin with bovine serum albumin is also investigated.The results indicate that an electrochemically inactive supramolecular complex is formed and the formation of complex between lomefloxacin and bovine serum albumin is an intercalation mechanism.The proposed methods offer a reference for the studies on the biological effects and action mechanism of lomefloxacin with albumins in vivo.展开更多
Anthraquinone(AQ)modified carbon materials could be endowed with significantly improved oxygen re-duction reaction(ORR)activity.However,the application of these materials in the generation of hydrogen peroxide(H2O2)ha...Anthraquinone(AQ)modified carbon materials could be endowed with significantly improved oxygen re-duction reaction(ORR)activity.However,the application of these materials in the generation of hydrogen peroxide(H2O2)has been rarely investigated.For this motivation,AQ covalently modified carbon nanotube(AQ-CNT)was pur-posely synthesized for H2O2 generation.It was found that the cumulative H2O2 concentration reached up to 187.18 mg(Lh)over AQ(40)-CNT catalyst,nearly 2.0 times higher than that over CNT,and being superior to those over most carbon materials reported.The enhanced activity stemmed from the improved mass transfer fficiency of oxygen and the enhanced electrocatalytic activity.Noteworthily,the AQ(40)-CNT material exhibited satisfactory stability for H2O2 generation,which was ascribed to the strong interaction force of C-N covalent bond.The present work could provide a vital idea for designing electrode material with simultancously improved activity and stability for H2O2 gencration.展开更多
In this study, a model for dynamic instability of embedded single-walled carbon nanotubes(SWCNTs) is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory(SSDBT). The modified couple stress the...In this study, a model for dynamic instability of embedded single-walled carbon nanotubes(SWCNTs) is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory(SSDBT). The modified couple stress theory(MCST) is considered in order to capture the size effects. The surrounding elastic medium is described by a visco-Pasternak foundation model, which accounts for normal, transverse shear, and damping loads. The motion equations are derived based on Hamilton's principle. The differential quadrature method(DQM) in conjunction with the Bolotin method is used in order to calculate the dynamic instability region(DIR) of SWCNTs. The effects of different parameters, such as nonlocal parameter, visco-Pasternak foundation, mode numbers,and geometrical parameters, are shown on the dynamic instability of SWCNTs. The results depict that increasing the nonlocal parameter shifts the DIR to right. The results presented in this paper would be helpful in design and manufacturing of nano-electromechanical system(NEMS) and micro-electro-mechanical system(MEMS).展开更多
Interfacing and compatibility are the most challenging issues that affect the performance of polymer modified asphalt.Mechanisms of interfacial enhancement among four base asphalt components(asphaltenes,resins,aromati...Interfacing and compatibility are the most challenging issues that affect the performance of polymer modified asphalt.Mechanisms of interfacial enhancement among four base asphalt components(asphaltenes,resins,aromatics,and saturate),styrene-butadiene-styrene(SBS),and carbon nanotubes(CNTs)were investigated by molecular dynamics simulation,with the aim of understanding the key parameters that control the compatibility of CNTs and interphase behavior on the molecular scale.The compatibility of SBS-modified asphalt(SBSMA)was simulated based on self-assembly theory using indexes of binding energy,mean square displacement,diffusion coefficient,and relative concentration distribution.The interphase behavior and microstructure were observed by fluorescence microscopy and scanning electron microscopy.In addition,a rutting experiment was used to verify the molecular dynamics simulation based on macroscopic performance.The results showed that after adding CNTs,the binding energy of the SBS and aromatics increased from 301.8343 to 327.1102 kcal/mol.The diffusion coefficient of the SBS and asphaltenes decreased more than 3.2×10-11 m2/s,and the correlation coefficients between the diffusion coefficient and the molecular weight,surface area and volume were all lower than 0.3.Relative concentration distribution curves indicated that CNTs promote the ability of SBS to swell.Microscopic observations demonstrated that the swelling ability of SBS was increased by CNTs.Overall,the interphase of SBSMA was improved by the additional reinforcement,swelling,and diffusion provided by CNTs.Finally,the rutting experiment found that no matter what the temperature,the rutting factor of CNT/SBSMA is higher than that of SBSMA,which corroborates the findings from the molecular dynamics simulations.展开更多
基金This work was financially supported by the Major State Basic Research Development Program of China (No.10332020)
文摘Antistatic polymer fibers were investigated by using carbon nanotubes (CNTs) to enhance the antistatic ability of inner antistatic agents based on the mechanism of attracting moisture by polar radical groups. It is indicated that the antistatic ability of the fibers filled with composite antistatic agents that contain CNTs and organic antistatic agents was superior to that of the fibers filled either with pure organic antistatic agents or pure CNTs. The antistatic ability of the composite antistatic agent fabricated by an in situ process was superior to that of the composite antistatic agent fabricated by direct dispersing CNTs in the antistatic agent carrier. Moreover, the heat-treated CNTs could further enhance the antistatic effect compared with the initial CNTs. The antistatic effect is significantly influenced by the content of CNTs in the composite antistatic agent.
文摘A sensitive electroanalytical method for quantification of pheniramine in pharmaceutical formulation has been investigated on the basis of the enhanced electrochemical response at glassy carbon electrode modified with multi-walled carbon nanotubes in the presence of sodium lauryl sulfate. The experimental results suggest that the pheniramine in anionic surfactant solution exhibits electrocatalytic effect resulting in a marked enhancement of the peak current response. Peak current response is linearly dependent on the concentration of pheniramine in the range 2001500 mg/mL with correlation coefficient 0.9987. The limit of detection is 58.31 mg/mL. The modified electrode shows good sensitivity and repeatability.
文摘Polypropylene (PP)/multi-walled carbon nanotube (MWCNT)/calcium carbonate (CaCO3) composites are prepared by melt mixing using two types of CaCO3 of different sizes. The electrical resistivities of the composites with the two types of CaCO3 are all lower than those of the corresponding PP/MWCNT composites at various MWCNT loadings (1 wt%-5 wt%). The morphology of the composites is investigated by field emission scanning electron microscopy (FESEM). The crystallization behavior of PP in the composites is characterized by differential scanning calorimetry (DSC). The storage modulus, as measured by dynamic mechanical analysis (DMA), increases significantly by the presence of CaCO3.
基金supported by the National Natural Science Foundation of China(Nos.12172281 and 11972284)the Distinguished Young Scholars of Shaanxi Province of China(No.2019JC-29)+2 种基金the Foundation Strengthening Programme Technical Area Fund of Shaanxi Province of China(No.2021-JCJQ-JJ-0565)the Science and Technology Innovation Team of Shaanxi Province of China(No.2022TD-61)the Youth Innovation Team of Shaanxi Universities and Doctoral Dissertation Innovation Fund of Xi’an University of Technology of China(Nos.252072016 and 252072115)。
文摘Solvent-free nanofluids hold promise for many technologically significant applications.The liquid-like behavior,a typical rheological property of solvent-free nanofluids,has aroused considerable interests.However,there has been still lack of efficient methods to predict and control the liquid-like behavior of solvent-free nanofluids.In this paper,we propose a semi-discrete dynamic system with stochastic excitation describing the temperature change effects on the rheological property of multiwall carbon nanotubes(MWCNTs)modified by grafting sulfonic acid terminated organosilanes as corona and tertiary amine as canopy,which is a typical covalent-type solvent-free nanofluid system.The vibration of the grafting branches is simulated by employing a structure-preserving approach,and the shear force of grafting branches at the fixed end is computed subsequently.By taking the shear forces as an excitation acting on the MWCNTs,the axial motion of the MWCNTs is solved with the 7-point Gauss-Kronrod quadrature rule.The critical temperature associated with the appearance of the liquid-like behavior as well as the upper bound of the moving speed of the modified MWCNTs is determined,which can be used to predict and control the liquid-like behavior of the modified MWCNTs in engineering applications.
文摘A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electrocatalytic oxidation of 6-mercaptopurine(6-MP). The CME can be used as the working electrode in the liquid chromatography for the determination of 6-MP. The peak current of 6-MP is linearly changed with its concentration ranging from 4.0×10 -7 to 1.0×10 -4 mol/L with the calculated detection limit (S/N=3) of 2.0×10 -7 mol/L. Coupled with microdialysis sampling, the method has been successfully applied to assessing the content of 6-MP in rat blood.
基金Supported by the National Natural Science Foundation of China(Nos.20676027 and 21076066)the Postdoctoral Foundation of Heilongjiang Province,China(No.LBH-Q07111)
文摘The electrocatalytic oxidation of nitric oxide(NO) at a glass carbon electrode(GC) modified with functionalized single-walled carbon nanotubes(SWCNTs) was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS).It was found that the SWCNT modified electrode could speed greatly up the electron transfer rate compared with the bare GC electrode.After the SWCNT was treated with alkali or mixed acids,the reaction rate and activation energy of NO electrooxidation were changed to different extent.Chemical modification of the SWCNT surface is one of the most powerful methods to change the sensitivity of NO electrooxidation reaction.The modified electrode with SWCNT obtained by the firstly alkali treatment and then the mixed acids treatment was the best one for NO electrooxidation,the result of CV was also confirmed by that of EIS.The anodic processes of NO were recognized more clearly by exploring the reaction mechanism of NO electrooxidation at the SWCNT modified electrode.
文摘Single wall carbon nanotube modified glassy carbon electrode (SWCNT/GCE) was used for flow-injection analysis (FIA) for phenolic compounds (phenol (P), 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorphenol (TCP) and pentachlorophenol (PCP)). Experimental variables such as the detection potential, flow rate and pH of the carrier solution, 0.1 M sodium acetate, were optimized. Under these conditions, the designed electrode showed a very good performance for the amperometric measurements, with no need to apply a cleaning or pre-treatment procedure. The operational stability was tested with 20 repetitive injections of each analyte and was found to be good. The analytical performance of the SWCNT/GCE electrode under flow through conditions was tested and was found to be impressive. When it is compared with other enzymatic and non-enzymatic sensors, it shows wider dynamic range for the detection of phenolic compounds with low limits of detection. These results suggest that the method is quite useful for monitoring and analyzing phenols and chlorophenols.
文摘We found carbon nanotube (CNT) materials by the pyrolysis of the composite film of poly (vinyl alcohol) (PVA) reinforced with modified fly ash (FA) at 500°C for 10 min under 2 L/min flow of nitrogen. Fly ash was treated with 2M sodium hydroxide and used with PVA to fabricate the composite film by aqua casting. CNT materials were analyzed using XPS, Raman, SEM and TEM. The admixtures of CNT materials and FA are a potential filler material for fabricating composites with polymer and metal. The process is an eco-friendly recycling paradigm for using value-added advanced products for the proper management of sustainable waste materials, plastic and FA.
基金supported by the National Natural Science Foundation of China(No.50134020)by the Foundation of Doctoral Programs of the Ministry of Education,(No.20010001028).
文摘Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0). The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.
文摘The electrochemical behavior of epinephrine at activated glassy carbon electrode and carbon nanotube-coated glassy carbon electrode was studied. Epinephrine could exhibit an anodic peak at about 0.2 V (vs. SCE) at bare glassy carbon electrode, but it was very small. However, when the electrode was activated at certain potential (i.e. 1.9 V) or modified with carbon nanotube, the peak became more sensitive, resulting from the increase in electrode area in addition to the electrostatic attraction. Under the selected conditions, the anodic peak current was linear to epinephrine concentration in the range of 3.3×10^-7-1.1×10^-5 mol/L at activated glassy carbon electrode and in the range of 1.0×10^-6-5.0×10^-5 mol/L at carbon nanotube-coated electrode. The correlation coefficients were 0.998 and 0.997, respectively. The determination limit was 1.0×10^-7 mol/L. The two electrodes have been successfully applied for the determination of epinephrine in adrenaline hydrochloride injection with recovery of 95%-104%.
基金the financial support of the Takle Key Problem of ScienceTechnology of Nanyang City,PR China(No.2006G0707).
文摘The electrochemistry of xanthinol nicotinate(Xan) was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes(MWNTs) and room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate(BMTMPF_6).The modified electrode exhibited good promotion to the electrochemical oxidation of Xan and an ultrasensitive electrochemical method was proposed for the determination of Xan.This method was successfully applied to the determination of Xan in Xan tablets.
基金the National Natural Science Foundation of China(Nos.U21A2098,51903171)the Key Research and Development Support Programme of Chengdu(No.2020-YF05-00316-SN)+2 种基金the State Key Research Development Pro-gramme of China(No.2018YFC1106400)the Science and Technol-ogy Project of Sichuan Province(No.2021YJ0188)the State Key Laboratory of Polymer Materials Engineering(No.sklpme2020-3-06).
文摘Artificial lung membranes as the core module of the extracorporeal membrane oxygenation technology(ECMO)execute the function of extracorporeal blood-gas barrier accomplishing CO_(2)/O_(2)exchange with blood.However,the unsatisfactory hemocompatibility and difficulty in functionalization are the promi-nent challenges faced by current artificial lung membrane materials.In this study,polyethersulfone(PES)composite membranes with self-anticoagulant property and high gas exchange efficient are fabricated by blending PES matrix with poly(vinylamine)(PVAm)modified carboxylic carbon nanotubes(mCNTs)and citrate-based poly(octamethylene-citrate)(POC)pre-polymers.The mCNTs construct specific gas transfer channels within the composite membranes to enhance the gas permeability,while the POC pre-polymers provide anticoagulant property based on the chelation to blood Ca^(2+)and the inactivation effect to in-trinsic coagulation factors.Importantly,directed by the actual ECMO gas exchange mode,we design a gas-liquid convectional circulation device that could evaluate gas exchange efficiency for the composite membranes under mimetic ECMO state.Therefore,this strategy not only proposes a new design method of advanced artificial lung membranes to solve the practical challenges in the current ECMO technology,but also establishes a scientific testing method to evaluate the gas exchange performance for new-type artificial lung membrane materials in the future.
基金supported by the National Defense Science and Technology Innovation Zone Project (Nos. 17H863-05-ZT-002-040-001 and 18-H863-05-ZT-002-01301
文摘Improving the performance of anode is a crucial step for increasing output power of marine sediment microbial fuel cells(MSMFCs)to drive marine monitor to work for a long term on the ocean floor.A pyrolyzed iron phthalocyanine modified multi-walled carbon nanotubes composite(FePc/MWCNTs)has been utilized as a novel nodified anode in the MSMFC.Its structure of the composite modified anode and electrochemical performance have been investigated respectively in the paper.There is a substantial improvement in electron-transfer efficiency from the bacteria biofilm to the modified anode via the pyrolyzed FePc/MWCNTs composite based on their cyclic voltammetry(CV)and Tafel curves.The electron transfer kinetic activity of the FePc/MWCNTs-modified anode is 1.86 times higher than of the unmodified anode.The maximum power density of the modified MSMFC was 572.3±14 m W m^-2,which is 2.6 times larger than the unmodified one(218.3±11 m W m^-2).The anodic structure and cell scale would be greatly minimized to obtain the same output power by the modified MSMFC,so that it will make the MSMFC to be easily deployed on the remote ocean floor.Therefore,it would have a great significance for us to design a novel and renewable long term power source.Finally,a novel molecular synergetic mechanism is proposed to elucidate its excellent electrochemical performance.
基金supported by the National Natural Science Foundation of China (Grant 21706036)the State Key Laboratory of Catalytic Materials and Reaction Engineering (RIPP, SINOPEC)the Natural Science Foundation of Fujian Province (Grant 2018J05019)
文摘The sintering of Pt nanoparticles is one of the main reasons for catalyst deactivation during the high-temperature propane dehydrogenation(PDH) reaction. Promoters and supports have been introduced to prolong the catalyst life.However, it is still necessary to develop novel catalysts with robust stability. Herein, the phosphorus-modified carbon nanotube-supported Pt nanoparticles were employed for the PDH process. Phosphorus modification improves the Pt dispersion, effectively promoting the activity of Pt/P-CNTs. Additionally, the phosphorus-modified CNTs can interact strongly with Pt nanoparticles by improving the electron transfer or hybridization, stabilizing Pt nanoparticles from agglomeration, and significantly enhancing the catalyst stability.
基金National Natural Science Foundation of China (No. 20775047)the Natural Science Foundation of Henan Province (No. 0511022300)
文摘The electrochemical behaviors of lomefloxacin at a single-wall carbon nanotube-modified glassy carbon electrode have been investigated by cyclic voltammetry.In a Britton-Robinson buffer (pH 4.5),lomefloxacin yields a sensitive and well-defined oxidation peak at ca.1.24 V (vs.SCE) on the modified electrode.Compared with the bare glassy carbon electrode,the oxidation peak current of lomefloxacin significantly increases and the oxidation peak potential positively shifts.Under the optimal conditions,the interaction of lomefloxacin with bovine serum albumin is also investigated.The results indicate that an electrochemically inactive supramolecular complex is formed and the formation of complex between lomefloxacin and bovine serum albumin is an intercalation mechanism.The proposed methods offer a reference for the studies on the biological effects and action mechanism of lomefloxacin with albumins in vivo.
基金Supported by the National Natural Science Foundation of China(Nos.21776188,2150613)the Project of the Science and Technology Department of Sichuan Province,China(Nos.2020YFG0158,2020YFH0162).
文摘Anthraquinone(AQ)modified carbon materials could be endowed with significantly improved oxygen re-duction reaction(ORR)activity.However,the application of these materials in the generation of hydrogen peroxide(H2O2)has been rarely investigated.For this motivation,AQ covalently modified carbon nanotube(AQ-CNT)was pur-posely synthesized for H2O2 generation.It was found that the cumulative H2O2 concentration reached up to 187.18 mg(Lh)over AQ(40)-CNT catalyst,nearly 2.0 times higher than that over CNT,and being superior to those over most carbon materials reported.The enhanced activity stemmed from the improved mass transfer fficiency of oxygen and the enhanced electrocatalytic activity.Noteworthily,the AQ(40)-CNT material exhibited satisfactory stability for H2O2 generation,which was ascribed to the strong interaction force of C-N covalent bond.The present work could provide a vital idea for designing electrode material with simultancously improved activity and stability for H2O2 gencration.
文摘In this study, a model for dynamic instability of embedded single-walled carbon nanotubes(SWCNTs) is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory(SSDBT). The modified couple stress theory(MCST) is considered in order to capture the size effects. The surrounding elastic medium is described by a visco-Pasternak foundation model, which accounts for normal, transverse shear, and damping loads. The motion equations are derived based on Hamilton's principle. The differential quadrature method(DQM) in conjunction with the Bolotin method is used in order to calculate the dynamic instability region(DIR) of SWCNTs. The effects of different parameters, such as nonlocal parameter, visco-Pasternak foundation, mode numbers,and geometrical parameters, are shown on the dynamic instability of SWCNTs. The results depict that increasing the nonlocal parameter shifts the DIR to right. The results presented in this paper would be helpful in design and manufacturing of nano-electromechanical system(NEMS) and micro-electro-mechanical system(MEMS).
基金the Innovative Funds Plan of Henan University of Technology(Nos.2020ZKCJ05 and 2020ZKCJ22)the Science and Technology Planning Project of Henan Province(No.192102310229)+4 种基金the Cultivation Plan for Youth Backbone Teachers of Institution of Higher Education by Henan Province(No.2019GGJS086)the Cultivation Plan for Youth Backbone Teachers by Henan University of Technologythe Key Science and Technology Research Project of Henan Provincial Department of Education(No.21A580002)the Foundation for Distinguished Young Talents of Henan University of Technology(No.2018QNJH09)the Central Public-interest Scientific Institution Basal Research Fund(No.2020–9049),China。
文摘Interfacing and compatibility are the most challenging issues that affect the performance of polymer modified asphalt.Mechanisms of interfacial enhancement among four base asphalt components(asphaltenes,resins,aromatics,and saturate),styrene-butadiene-styrene(SBS),and carbon nanotubes(CNTs)were investigated by molecular dynamics simulation,with the aim of understanding the key parameters that control the compatibility of CNTs and interphase behavior on the molecular scale.The compatibility of SBS-modified asphalt(SBSMA)was simulated based on self-assembly theory using indexes of binding energy,mean square displacement,diffusion coefficient,and relative concentration distribution.The interphase behavior and microstructure were observed by fluorescence microscopy and scanning electron microscopy.In addition,a rutting experiment was used to verify the molecular dynamics simulation based on macroscopic performance.The results showed that after adding CNTs,the binding energy of the SBS and aromatics increased from 301.8343 to 327.1102 kcal/mol.The diffusion coefficient of the SBS and asphaltenes decreased more than 3.2×10-11 m2/s,and the correlation coefficients between the diffusion coefficient and the molecular weight,surface area and volume were all lower than 0.3.Relative concentration distribution curves indicated that CNTs promote the ability of SBS to swell.Microscopic observations demonstrated that the swelling ability of SBS was increased by CNTs.Overall,the interphase of SBSMA was improved by the additional reinforcement,swelling,and diffusion provided by CNTs.Finally,the rutting experiment found that no matter what the temperature,the rutting factor of CNT/SBSMA is higher than that of SBSMA,which corroborates the findings from the molecular dynamics simulations.
