The film formation process of micro-PS particles (diameter 742 nm) and nano-PS particles (diameter 29 nm) was studied by atomic force microscopy and differential scanning calorimetry. During a step heating process, th...The film formation process of micro-PS particles (diameter 742 nm) and nano-PS particles (diameter 29 nm) was studied by atomic force microscopy and differential scanning calorimetry. During a step heating process, the particles were annealed for 0.5 h at each selected temperature. It was found that the deformation and interdiffusion temperatures of the micro-PS particles are ca. 120-130degreesC and 140-150degreesC, that of the nano-PS particles are 90degreesC and 100-110degreesC respectively. The DSC traces of nano-PS particles showed that there was an exothermic peak near T-g after annealing for 0.5 h at the selected temperatures below 90degreesC; otherwise, the exothermic peak disappeared after annealing at 100degreesC or above. Compared with the micro-PS particles, the sintering process of nano-PS particles occurs at much lower temperature determined by the confined state of polymer chains with higher conformational energy in nano-particles, and completes in a much narrower temperature range driven mainly by the larger total surface energy.展开更多
Since the living microorganisms in activated sludge continuously change, it is difficult to conduct controlled experiments and achieve reproducible results for evaluating sludge characteristics. Synthetic sludge, as a...Since the living microorganisms in activated sludge continuously change, it is difficult to conduct controlled experiments and achieve reproducible results for evaluating sludge characteristics. Synthetic sludge, as a chemical surrogate to activated sludge, could be used to investigate the sludge physicochemical properties, and it is desirable to prepare synthetic sludge with similar structure and properties to real activated sludge to explore the flocculation and settlement processes in activated sludge systems. In this work, a high-strength synthetic sludge was prepared with functional polystyrene latex particles as the framework and extracellular polymeric substances （EPS） to modify its surface. The flocculation and settling characteristics of the microspheres and the prepared synthetic sludge were tested. Compared with other three functional polystyrene latex microspheres, the synthetic sludge prepared with EPS-modified polystyrene latex microspheres showed good settling characteristics and a significantly higher strength. They could be used for studying the physicochemical properties of activated sludge.展开更多
A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination...A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination of size distribution was statistical.展开更多
Grafting of methoxypoly(ethylene glycol)(mPEG) to cells and biomaterials is a promising non-pharmacological immunomodulation technology.However,due to the labile nature of cells,surface-plasma interactions are poorly ...Grafting of methoxypoly(ethylene glycol)(mPEG) to cells and biomaterials is a promising non-pharmacological immunomodulation technology.However,due to the labile nature of cells,surface-plasma interactions are poorly understood;hence,a latex bead model was studied.PEGylation of beads resulted in a density and molecular weight dependent decrease in total adsorbed protein with a net reduction from(159.9±6.4) ng cm-2 on bare latex to(18.4±0.8) and(52.3±5.3) ng cm-2 on PEGylated beads(1 mmol L-1 of 2 or 20 kD SCmPEG,respectively).SDS-PAGE and iTRAQ-MS analysis revealed differential compositions of the adsorbed protein layer on the PEGylated latex with a significant reduction in the compositional abundance of proteins involved in immune system activation.Thus,the biological efficacy of immunocamouflaged cells and materials is mediated by both biophysical obfuscation of antigens and reduced surface-macromolecule interactions.展开更多
A layer of zinc oxide(ZnO)micro-grid was deposited on the surface of ZnO film using the DC reactive magnetron sputtering method and the micro-sphere lithography technique on glass substrates.Samples of this layer were...A layer of zinc oxide(ZnO)micro-grid was deposited on the surface of ZnO film using the DC reactive magnetron sputtering method and the micro-sphere lithography technique on glass substrates.Samples of this layer were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),atomic force microscopy(AFM),and ultraviolet-visible light spectroscopy.X-ray diffraction showed the high crystallinity of ZnO film and the regular arrangement of the micro-grid.The microgrid ZnO has a lower specular reflection and a higher diffuse reflection,allowing incident light to reflect two or three times to enhance the usage of light.Photocatalytic degradation experiments on methylene blue using both ZnO micro-grid and ordinary film showed that the ZnO micro-grid has better photocatalytic properties than ordinary film.The ZnO micro-grid enhanced the photocatalytic efficiency of ZnO film by 28%with a degradation time of 300 min.展开更多
基金This work was funded by the Special Funds for Major State Basic Research Project (Grant No. 95-12-G1999064800) and National Natural Science Foundation of China (Grant No. 20004011 & 20023003).
文摘The film formation process of micro-PS particles (diameter 742 nm) and nano-PS particles (diameter 29 nm) was studied by atomic force microscopy and differential scanning calorimetry. During a step heating process, the particles were annealed for 0.5 h at each selected temperature. It was found that the deformation and interdiffusion temperatures of the micro-PS particles are ca. 120-130degreesC and 140-150degreesC, that of the nano-PS particles are 90degreesC and 100-110degreesC respectively. The DSC traces of nano-PS particles showed that there was an exothermic peak near T-g after annealing for 0.5 h at the selected temperatures below 90degreesC; otherwise, the exothermic peak disappeared after annealing at 100degreesC or above. Compared with the micro-PS particles, the sintering process of nano-PS particles occurs at much lower temperature determined by the confined state of polymer chains with higher conformational energy in nano-particles, and completes in a much narrower temperature range driven mainly by the larger total surface energy.
文摘Since the living microorganisms in activated sludge continuously change, it is difficult to conduct controlled experiments and achieve reproducible results for evaluating sludge characteristics. Synthetic sludge, as a chemical surrogate to activated sludge, could be used to investigate the sludge physicochemical properties, and it is desirable to prepare synthetic sludge with similar structure and properties to real activated sludge to explore the flocculation and settlement processes in activated sludge systems. In this work, a high-strength synthetic sludge was prepared with functional polystyrene latex particles as the framework and extracellular polymeric substances （EPS） to modify its surface. The flocculation and settling characteristics of the microspheres and the prepared synthetic sludge were tested. Compared with other three functional polystyrene latex microspheres, the synthetic sludge prepared with EPS-modified polystyrene latex microspheres showed good settling characteristics and a significantly higher strength. They could be used for studying the physicochemical properties of activated sludge.
文摘A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination of size distribution was statistical.
基金supported by grants from the Canadian Blood Services,Canadian Blood Services-Canadian Institutes of Health Research(CBS-CIHR) Partnership Fund and Health Canada
文摘Grafting of methoxypoly(ethylene glycol)(mPEG) to cells and biomaterials is a promising non-pharmacological immunomodulation technology.However,due to the labile nature of cells,surface-plasma interactions are poorly understood;hence,a latex bead model was studied.PEGylation of beads resulted in a density and molecular weight dependent decrease in total adsorbed protein with a net reduction from(159.9±6.4) ng cm-2 on bare latex to(18.4±0.8) and(52.3±5.3) ng cm-2 on PEGylated beads(1 mmol L-1 of 2 or 20 kD SCmPEG,respectively).SDS-PAGE and iTRAQ-MS analysis revealed differential compositions of the adsorbed protein layer on the PEGylated latex with a significant reduction in the compositional abundance of proteins involved in immune system activation.Thus,the biological efficacy of immunocamouflaged cells and materials is mediated by both biophysical obfuscation of antigens and reduced surface-macromolecule interactions.
基金the National Natural Science Foundation of China(Grant Nos.50672003 and 50872005)the National Basic Research Program of China(Grant No.2007CB613302)the Fok Ying-Tong Education Foundation(No.111050).
文摘A layer of zinc oxide(ZnO)micro-grid was deposited on the surface of ZnO film using the DC reactive magnetron sputtering method and the micro-sphere lithography technique on glass substrates.Samples of this layer were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),atomic force microscopy(AFM),and ultraviolet-visible light spectroscopy.X-ray diffraction showed the high crystallinity of ZnO film and the regular arrangement of the micro-grid.The microgrid ZnO has a lower specular reflection and a higher diffuse reflection,allowing incident light to reflect two or three times to enhance the usage of light.Photocatalytic degradation experiments on methylene blue using both ZnO micro-grid and ordinary film showed that the ZnO micro-grid has better photocatalytic properties than ordinary film.The ZnO micro-grid enhanced the photocatalytic efficiency of ZnO film by 28%with a degradation time of 300 min.
