In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information a...In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information and weak anti-noise performance,a new approach for identifying power quality disturbances based on an adaptive Kalman filter(KF)and multi-scale channel attention(MS-CAM)fused convolutional neural network is suggested.Single and composite-disruption signals are generated through simulation.The adaptive maximum likelihood Kalman filter is employed for noise reduction in the initial disturbance signal,and subsequent integration of multi-scale features into the conventional CNN architecture is conducted.The multi-scale features of the signal are captured by convolution kernels of different sizes so that the model can obtain diverse feature expressions.The attention mechanism(ATT)is introduced to adaptively allocate the extracted features,and the features are fused and selected to obtain the new main features.The Softmax classifier is employed for the classification of power quality disturbances.Finally,by comparing the recognition accuracy of the convolutional neural network(CNN),the model using the attention mechanism,the bidirectional long-term and short-term memory network(MS-Bi-LSTM),and the multi-scale convolutional neural network(MSCNN)with the attention mechanism with the proposed method.The simulation results demonstrate that the proposed method is higher than CNN,MS-Bi-LSTM,and MSCNN,and the overall recognition rate exceeds 99%,and the proposed method has significant classification accuracy and robust classification performance.This achievement provides a new perspective for further exploration in the field of power quality disturbance classification.展开更多
With increasing global concerns about clean energy in smart grids,the detection of power quality disturbances(PQDs)caused by energy instability is becoming more and more prominent.It is well acknowledged that the PQD ...With increasing global concerns about clean energy in smart grids,the detection of power quality disturbances(PQDs)caused by energy instability is becoming more and more prominent.It is well acknowledged that the PQD effects on power grid equipment are destructive and hazardous,which causes irreversible damage to underlying electrical/electronic equipment of the concerned intelligent grids.In order to ensure safe and reliable equipment implementation,appropriate PQDdetection technologiesmust be adopted to avoid such adverse effects.This paper summarizes the newly proposed and traditional PQD detection techniques in order to give a quick start to new researchers in the related field,where specific scenarios and events for which each technique is applicable are also clearly presented.Finally,comments on the future evolution of PQD detection techniques are given.Unlike the published review articles,this paper focuses on the new techniques from the last five years while providing a brief recap on traditional PQD detection techniques so as to supply researchers with a systematic and state-of-the-art review for PQD detection.展开更多
In this work,an Artificial Neural Network(ANN)based technique is suggested for classifying the faults which occur in hybrid power distribution systems.Power,which is generated by the solar and wind energy-based hybrid...In this work,an Artificial Neural Network(ANN)based technique is suggested for classifying the faults which occur in hybrid power distribution systems.Power,which is generated by the solar and wind energy-based hybrid system,is given to the grid at the Point of Common Coupling(PCC).A boost converter along with perturb and observe(P&O)algorithm is utilized in this system to obtain a constant link voltage.In contrast,the link voltage of the wind energy conversion system(WECS)is retained with the assistance of a Proportional Integral(PI)controller.The grid synchronization is tainted with the assis-tance of the d-q theory.For the analysis of faults like islanding,line-ground,and line-line fault,the ANN is utilized.The voltage signal is observed at the PCC,and the Discrete Wavelet Transform(DWT)is employed to obtain different features.Based on the collected features,the ANN classifies the faults in an effi-cient manner.The simulation is done in MATLAB and the results are also validated through the hardware implementation.Detailed fault analysis is carried out and the results are compared with the existing techniques.Finally,the Total harmonic distortion(THD)is lessened by 4.3%by using the proposed methodology.展开更多
Aiming at the problems of multiple types of power quality composite disturbances,strong feature correlation and high recognition error rate,a method of power quality composite disturbances identification based on mult...Aiming at the problems of multiple types of power quality composite disturbances,strong feature correlation and high recognition error rate,a method of power quality composite disturbances identification based on multiresolution S-transform and decision tree was proposed.Firstly,according to IEEE standard,the signal models of seven single power quality disturbances and 17 combined power quality disturbances are given,and the disturbance waveform samples are generated in batches.Then,in order to improve the recognition accuracy,the adjustment factor is introduced to obtain the controllable time-frequency resolution through multi-resolution S-transform time-frequency domain analysis.On this basis,five disturbance time-frequency domain features are extracted,which quantitatively reflect the characteristics of the analyzed power quality disturbance signal,which is less than the traditional method based on S-transform.Finally,three classifiers such as K-nearest neighbor,support vector machine and decision tree algorithm are used to effectively complete the identification of power quality composite disturbances.Simulation results showthat the classification accuracy of decision tree algorithmis higher than that of K-nearest neighbor and support vector machine.Finally,the proposed method is compared with other commonly used recognition algorithms.Experimental results show that the proposedmethod is effective in terms of detection accuracy,especially for combined PQ interference.展开更多
In this paper, a novel signal processing method combining mathematical morphology (MM) and Walsh theory is proposed, which uses Walsh functions to control the structuring element (SE) and MM operators. Based on the Wa...In this paper, a novel signal processing method combining mathematical morphology (MM) and Walsh theory is proposed, which uses Walsh functions to control the structuring element (SE) and MM operators. Based on the Walsh-MM method, a scheme for power quality disturbances detection and classification is developed, which involves three steps: denoising, feature extraction and morphological clustering. First, various evolution rules of Walsh function are used to generate groups of SEs for the multiscale Walsh-ordered morphological operation, so the original signal can be denoised. Next, the fundamental wave of the denoised signal is suppressed by Hadamard matrix;thus, disturbances can be extracted. Finally, the Walsh power spectrum of the waveform extracted in the previous step is calculated, and the parameters of which are taken by morphological clustering to classify the disturbances. Simulation results reveal the proposed scheme can effectively detect and classify disturbances, and the Walsh-MM method is less affected by noise and only involves simple calculation, which has a potential to be implemented in hardware and more suitable for real-time application.展开更多
The definition of reactive power for non-sinusoidal conditions is a controversial issue.The mathematical treatment of nonlinear loads in power systems is also unsettled.This paper starts with the decomposing of appare...The definition of reactive power for non-sinusoidal conditions is a controversial issue.The mathematical treatment of nonlinear loads in power systems is also unsettled.This paper starts with the decomposing of apparent power in the cases of linear and nonlinear loads.When harmonics are present,apparent power is composed of active power,reactive power,and disturbed reactive power.Linear element can be defined as the element without disturbed reactive power.This definition is based on a practical engineering concept which can separate the contribution from the apparent power into utility-duty part and custom-duty part.The field investigation of home-used facilities was conducted.Also the data acquisition in the 0.4 kV distribution systems was completed.Moreover,the loss increase due to the nonlinear loads was estimated.Nonlinear loads can be a dominant effect with respect to reactive power and power factor.Field data from a number of nonlinear load types indicate that the disturbed reactive power can cause significant losses in utility supply systems.展开更多
In the compression of massive compound power quality disturbance(PQD) signals in active distribution networks, the compression ratio(CR) and reconstruction error(RE) act as a pair of contradictory indicators, and trad...In the compression of massive compound power quality disturbance(PQD) signals in active distribution networks, the compression ratio(CR) and reconstruction error(RE) act as a pair of contradictory indicators, and traditional compression algorithms have difficulties in simultaneously satisfying a high CR and low RE. To improve the CR and reduce the RE, a hybrid compression method that combines a strong tracking Kalman filter(STKF), sparse decomposition, Huffman coding, and run-length coding is proposed in this study. This study first uses a sparse decomposition algorithm based on a joint dictionary to separate the transient component(TC) and the steady-state component(SSC) in the PQD. The TC is then compressed by wavelet analysis and by Huffman and runlength coding algorithms. For the SSC, values that are greater than the threshold are reserved, and the compression is finally completed. In addition, the threshold of the wavelet depends on the fading factor of the STKF to obtain a high CR. Experimental results of real-life signals measured by fault recorders in a dynamic simulation laboratory show that the CR of the proposed method reaches as high as 50 and the RE is approximately 1.6%, which are better than those of competing methods. These results demonstrate the immunity of the proposed method to the interference of Gaussian noise and sampling frequency.展开更多
This paper addresses an infinite horizon distributed H2/H∞ filtering for discrete-time systems under conditions of bounded power and white stochastic signals. The filter algorithm is designed by computing a pair of g...This paper addresses an infinite horizon distributed H2/H∞ filtering for discrete-time systems under conditions of bounded power and white stochastic signals. The filter algorithm is designed by computing a pair of gains namely the estimator and the coupling. Herein, we implement a filter to estimate unknown parameters such that the closed-loop multi-sensor accomplishes the desired performances of the proposed H2 and H∞ schemes over a finite horizon. A switched strategy is implemented to switch between the states once the operation conditions have changed due to disturbances. It is shown that the stability of the overall filtering-error system with H2/H∞ performance can be established if a piecewise-quadratic Lyapunov function is properly constructed. A simulation example is given to show the effectiveness of the proposed approach.展开更多
This paper introduces an algorithm based on wavelet packet supported fast kurtogram and decision rules for the identification and classification of complex power quality(PQ)disturbances.Features are extracted from the...This paper introduces an algorithm based on wavelet packet supported fast kurtogram and decision rules for the identification and classification of complex power quality(PQ)disturbances.Features are extracted from the signals using fast kurtogram,envelope of filtered voltage signal and amplitude spectrum of squared envelop.Proposed algorithm can be implemented for the recognition of the complex PQ disturbances,which include the combination of voltage sag and harmonics,voltage momentary interruption(MI)and oscillatory transient(OT),voltage MI and harmonics,voltage sag and impulsive transient(IT),voltage sag,OT,IT and harmonics.Proposed work has been performed using the MATLAB software.Performance of the algorithm is compared with performance of algorithm supported by discrete wavelet transform(DWT)and fuzzy C-means clustering(FCM).展开更多
基金The project is supported by the National Natural Science Foundation of China(52067013)the Key Projects of the Natural Science Foundation of Gansu Provincial Science and Technology Department(22JR5RA318).
文摘In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information and weak anti-noise performance,a new approach for identifying power quality disturbances based on an adaptive Kalman filter(KF)and multi-scale channel attention(MS-CAM)fused convolutional neural network is suggested.Single and composite-disruption signals are generated through simulation.The adaptive maximum likelihood Kalman filter is employed for noise reduction in the initial disturbance signal,and subsequent integration of multi-scale features into the conventional CNN architecture is conducted.The multi-scale features of the signal are captured by convolution kernels of different sizes so that the model can obtain diverse feature expressions.The attention mechanism(ATT)is introduced to adaptively allocate the extracted features,and the features are fused and selected to obtain the new main features.The Softmax classifier is employed for the classification of power quality disturbances.Finally,by comparing the recognition accuracy of the convolutional neural network(CNN),the model using the attention mechanism,the bidirectional long-term and short-term memory network(MS-Bi-LSTM),and the multi-scale convolutional neural network(MSCNN)with the attention mechanism with the proposed method.The simulation results demonstrate that the proposed method is higher than CNN,MS-Bi-LSTM,and MSCNN,and the overall recognition rate exceeds 99%,and the proposed method has significant classification accuracy and robust classification performance.This achievement provides a new perspective for further exploration in the field of power quality disturbance classification.
文摘With increasing global concerns about clean energy in smart grids,the detection of power quality disturbances(PQDs)caused by energy instability is becoming more and more prominent.It is well acknowledged that the PQD effects on power grid equipment are destructive and hazardous,which causes irreversible damage to underlying electrical/electronic equipment of the concerned intelligent grids.In order to ensure safe and reliable equipment implementation,appropriate PQDdetection technologiesmust be adopted to avoid such adverse effects.This paper summarizes the newly proposed and traditional PQD detection techniques in order to give a quick start to new researchers in the related field,where specific scenarios and events for which each technique is applicable are also clearly presented.Finally,comments on the future evolution of PQD detection techniques are given.Unlike the published review articles,this paper focuses on the new techniques from the last five years while providing a brief recap on traditional PQD detection techniques so as to supply researchers with a systematic and state-of-the-art review for PQD detection.
文摘In this work,an Artificial Neural Network(ANN)based technique is suggested for classifying the faults which occur in hybrid power distribution systems.Power,which is generated by the solar and wind energy-based hybrid system,is given to the grid at the Point of Common Coupling(PCC).A boost converter along with perturb and observe(P&O)algorithm is utilized in this system to obtain a constant link voltage.In contrast,the link voltage of the wind energy conversion system(WECS)is retained with the assistance of a Proportional Integral(PI)controller.The grid synchronization is tainted with the assis-tance of the d-q theory.For the analysis of faults like islanding,line-ground,and line-line fault,the ANN is utilized.The voltage signal is observed at the PCC,and the Discrete Wavelet Transform(DWT)is employed to obtain different features.Based on the collected features,the ANN classifies the faults in an effi-cient manner.The simulation is done in MATLAB and the results are also validated through the hardware implementation.Detailed fault analysis is carried out and the results are compared with the existing techniques.Finally,the Total harmonic distortion(THD)is lessened by 4.3%by using the proposed methodology.
基金Foundation of China(No.52067013)the Key Natural Science Fund Project of Gansu Provincial Department of Science and Technology(No.21JR7RA280)+1 种基金the Tianyou Innovation Team Science Foundation of Intelligent Power Supply and State Perception for Rail Transit(No.TY202010)the Natural Science Foundation of Gansu Province(No.20JR5RA395).
文摘Aiming at the problems of multiple types of power quality composite disturbances,strong feature correlation and high recognition error rate,a method of power quality composite disturbances identification based on multiresolution S-transform and decision tree was proposed.Firstly,according to IEEE standard,the signal models of seven single power quality disturbances and 17 combined power quality disturbances are given,and the disturbance waveform samples are generated in batches.Then,in order to improve the recognition accuracy,the adjustment factor is introduced to obtain the controllable time-frequency resolution through multi-resolution S-transform time-frequency domain analysis.On this basis,five disturbance time-frequency domain features are extracted,which quantitatively reflect the characteristics of the analyzed power quality disturbance signal,which is less than the traditional method based on S-transform.Finally,three classifiers such as K-nearest neighbor,support vector machine and decision tree algorithm are used to effectively complete the identification of power quality composite disturbances.Simulation results showthat the classification accuracy of decision tree algorithmis higher than that of K-nearest neighbor and support vector machine.Finally,the proposed method is compared with other commonly used recognition algorithms.Experimental results show that the proposedmethod is effective in terms of detection accuracy,especially for combined PQ interference.
基金supported by the National Natural Science Foundation of China(52077081)。
文摘In this paper, a novel signal processing method combining mathematical morphology (MM) and Walsh theory is proposed, which uses Walsh functions to control the structuring element (SE) and MM operators. Based on the Walsh-MM method, a scheme for power quality disturbances detection and classification is developed, which involves three steps: denoising, feature extraction and morphological clustering. First, various evolution rules of Walsh function are used to generate groups of SEs for the multiscale Walsh-ordered morphological operation, so the original signal can be denoised. Next, the fundamental wave of the denoised signal is suppressed by Hadamard matrix;thus, disturbances can be extracted. Finally, the Walsh power spectrum of the waveform extracted in the previous step is calculated, and the parameters of which are taken by morphological clustering to classify the disturbances. Simulation results reveal the proposed scheme can effectively detect and classify disturbances, and the Walsh-MM method is less affected by noise and only involves simple calculation, which has a potential to be implemented in hardware and more suitable for real-time application.
文摘The definition of reactive power for non-sinusoidal conditions is a controversial issue.The mathematical treatment of nonlinear loads in power systems is also unsettled.This paper starts with the decomposing of apparent power in the cases of linear and nonlinear loads.When harmonics are present,apparent power is composed of active power,reactive power,and disturbed reactive power.Linear element can be defined as the element without disturbed reactive power.This definition is based on a practical engineering concept which can separate the contribution from the apparent power into utility-duty part and custom-duty part.The field investigation of home-used facilities was conducted.Also the data acquisition in the 0.4 kV distribution systems was completed.Moreover,the loss increase due to the nonlinear loads was estimated.Nonlinear loads can be a dominant effect with respect to reactive power and power factor.Field data from a number of nonlinear load types indicate that the disturbed reactive power can cause significant losses in utility supply systems.
基金supported in part by the National Natural Science Foundation of China (No.52077089)。
文摘In the compression of massive compound power quality disturbance(PQD) signals in active distribution networks, the compression ratio(CR) and reconstruction error(RE) act as a pair of contradictory indicators, and traditional compression algorithms have difficulties in simultaneously satisfying a high CR and low RE. To improve the CR and reduce the RE, a hybrid compression method that combines a strong tracking Kalman filter(STKF), sparse decomposition, Huffman coding, and run-length coding is proposed in this study. This study first uses a sparse decomposition algorithm based on a joint dictionary to separate the transient component(TC) and the steady-state component(SSC) in the PQD. The TC is then compressed by wavelet analysis and by Huffman and runlength coding algorithms. For the SSC, values that are greater than the threshold are reserved, and the compression is finally completed. In addition, the threshold of the wavelet depends on the fading factor of the STKF to obtain a high CR. Experimental results of real-life signals measured by fault recorders in a dynamic simulation laboratory show that the CR of the proposed method reaches as high as 50 and the RE is approximately 1.6%, which are better than those of competing methods. These results demonstrate the immunity of the proposed method to the interference of Gaussian noise and sampling frequency.
基金supported by the Deanship of Scientific Research(DSR)at KFUPM through distinguished professorship project(161065)
文摘This paper addresses an infinite horizon distributed H2/H∞ filtering for discrete-time systems under conditions of bounded power and white stochastic signals. The filter algorithm is designed by computing a pair of gains namely the estimator and the coupling. Herein, we implement a filter to estimate unknown parameters such that the closed-loop multi-sensor accomplishes the desired performances of the proposed H2 and H∞ schemes over a finite horizon. A switched strategy is implemented to switch between the states once the operation conditions have changed due to disturbances. It is shown that the stability of the overall filtering-error system with H2/H∞ performance can be established if a piecewise-quadratic Lyapunov function is properly constructed. A simulation example is given to show the effectiveness of the proposed approach.
文摘This paper introduces an algorithm based on wavelet packet supported fast kurtogram and decision rules for the identification and classification of complex power quality(PQ)disturbances.Features are extracted from the signals using fast kurtogram,envelope of filtered voltage signal and amplitude spectrum of squared envelop.Proposed algorithm can be implemented for the recognition of the complex PQ disturbances,which include the combination of voltage sag and harmonics,voltage momentary interruption(MI)and oscillatory transient(OT),voltage MI and harmonics,voltage sag and impulsive transient(IT),voltage sag,OT,IT and harmonics.Proposed work has been performed using the MATLAB software.Performance of the algorithm is compared with performance of algorithm supported by discrete wavelet transform(DWT)and fuzzy C-means clustering(FCM).
