The effect of calcination temperature on the pozzolanic activity of maize straw stem ash(MSSA)was evaluated.The MSSA samples calcined at temperature values of 500,700,and 850℃ were dissolved in portlandite solution f...The effect of calcination temperature on the pozzolanic activity of maize straw stem ash(MSSA)was evaluated.The MSSA samples calcined at temperature values of 500,700,and 850℃ were dissolved in portlandite solution for 6 h,thereby obtaining residual samples.The MSSA and MSSA residual samples were analyzed using Fourier transform infrared spectroscopy,X-ray powder diffraction scanning electron microscopy,and X-ray photoelectron spectroscopy to determine vibration bonds,minerals,microstructures,and Si 2p transformation behavior.The conductivity,pH value,and loss of conductivity with dissolving time of the MSSA-portlandite mixed solution were also determined.The main oxide composition of MSSA was silica and potassium oxide.The dissolution of the Si^(4+) content of MSSA at 500℃ was higher than those of the other calcination temperatures.The conductivity and loss of conductivity of MSSA at 700℃ were higher than those of the other calcination temperatures at a particular dissolving time due to the higher KCl content in MSSA at 700℃.C-S-H was easily identified in MSSA samples using X-ray powder diffraction,and small cubic and nearly spherical particles of C-S-H were found in the MSSA residual samples.In conclusion,the optimum calcination temperature of MSSA having the best pozzolanic activity is 500℃,but excessive agglomeration must be prevented.展开更多
The results of investigation to assess the possibility of copper slag with high MgO to be used as a mineral admixture in concrete were reported in this study. The soundness of cement paste containing the slag has been...The results of investigation to assess the possibility of copper slag with high MgO to be used as a mineral admixture in concrete were reported in this study. The soundness of cement paste containing the slag has been examined by autoclave test. Pozzolanic activity of the slag was studied in comparison to fly ash. The slag was mixed calcium hydroxide and water,and the progress of the pozzolanic reaction was determined by X-ray diffraction,differential thermal analysis-thermogravimetry and scanning electron microscopy from 28 to 90 d. The experimental results showed that the autoclave expansion value of cement paste containing the slag was far below the expansion limit (0.8%). It can be conclude that the slag has little periclase content. The consumption of calcium hydroxide showed the slag exhibits high pozzolanic activity,which was higher than that of fly ash. Hence,use of the copper slag with high MgO but low periclase content as a mineral admixture in concrete seems feasible.展开更多
This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the...This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the characterization of the tailings before and after calcination, chemical, mineralogical, thermogravimetric, and mechanical strength analyses were conducted. The results were compared with those for commonly used pozzolans, metakaolin, and similarities were identified. The study of the morphology of the particles before and after calcination was conducted through analyses of images obtained by scanning electronic microscope. The pozzolanic activity of the fine mining tailings calcined with flash technology was evaluated in uniaxial compression trials, which showed excellent results.展开更多
Green and sustainable concrete has attracted significant attention from the construction industry and researchers since it was proposed.The ceramic waste materials are often directly buried in the ground or placed in ...Green and sustainable concrete has attracted significant attention from the construction industry and researchers since it was proposed.The ceramic waste materials are often directly buried in the ground or placed in an open dump,and the accumulation of ceramic waste contributes to environmental pollution,which makes the recycling of ceramic waste quite urgent.Owing to the pozzolanic activity,excellent mechanical properties and durability,industrial ceramic waste is considered as a suitable substitute for cement or natural aggregates to fabricate renewable concrete.In this paper,the pozzolanic activity of ceramic waste and the workability,mechanical performance,and durability of ceramic concrete are discussed.In addition,the most recent research results pertaining to ceramic concrete are reviewed.Ground ceramic powder improves the workability,compressive strength,resistance to chloride penetration,and carbonation resistance of concrete to a certain extent.Concrete containing ceramic as the aggregate has a lower mechanical performance than ordinary concrete.However,the resistance to chloride penetration,freeze-thaw resistance,and high-temperature resistance of ceramic concrete are remarkable.Ceramic concrete is environmentally friendly,requires fewer energy resources to manufacture than ordinary concrete,and has excellent engineering properties.However,further research is required for future engineering applications.展开更多
The demand for alternative cementitious materials is on the rise,as the cement causes huge energy consumption and produces greenhouse gas emission.Additionally,there is economic potential for the construction industry...The demand for alternative cementitious materials is on the rise,as the cement causes huge energy consumption and produces greenhouse gas emission.Additionally,there is economic potential for the construction industry to reuse wastes as supplementary building materials.The purpose of this study is to evaluate the potential of utilizing ferrochrome slag wastes in mortar as supplementary cementitious materials (SCMs),thereby achieving this double-sided goal.Thus,the mechanical and physical properties of ferrochrome slag wastes were investigated to be used as admixtures in concrete production.Three different cement mortar specimens were prepared by replacing cement with ferrochrome slag in ratios of 0,30%,and 60% by mass and flexural and compressive strengths of the specimens were determined at the ages of 7,28,56,90,and 180 days.Also,the effects of the ferrochrome slag replacement ratio on workability,setting time and volume expansion were revealed.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were also investigated to study the microstructural properties of the specimens containing ferrochrome slag.Based on the results,it is concluded that ferrochrome slag wastes have pozzolanic activity,therefore reusing them as SCMs in the cement and concrete industry is convenient.展开更多
The cost of cement has made concrete production expensive such that the housing deficit in developing countries is on the rise despite all the efforts by governments and other stakeholders to produce affordable housin...The cost of cement has made concrete production expensive such that the housing deficit in developing countries is on the rise despite all the efforts by governments and other stakeholders to produce affordable housing units for the populace. Ashes of agricultural products such as rice husk, known as mineral admixtures may have pozzolanic characteristics which would be more beneficial to the housing industry in terms of strength gain and economy than being pollutants to the environment. Rice Husk Ash (RHA), because of its finely divided form and very high silica content and amorphousness, proved to be useful for strength gain of Rice Husk Ash Concrete (RHAC). Rice husk ash was manufactured by uncontrolled burning, ground, sieved and replaced with cement at 0%, 5%, 10%, 15%, 20% and 25% in mass for the mixes C20, C25, C30 and C35 where their compressive strengths were verified at 3, 7, 14, 21, 28, 56, 90 and 180 days. The X-ray diffraction pattern list indicated amorphous as well as diffused peak of about 8000 counts of SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> representing crystalline structures identified as cristobalite. A physical examination of the RHA showed very fine appearance, grey color and specific gravity of 2.06. The chemical analysis also revealed the existence of oxide content to be 55.8% representing 0.78% of Fe</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">, 54% of SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> and 1.06% of Al</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;"> representing 20.23% lower than the minimum value of 70% required for pozzolans. Generally, the compressive strength values decreased as the RHA content in the mixes increased but when compared to the control concrete the optimum replacement percentage of Ordinary Portland Cement (OPC) with RHA at 5% showed an increase above the control concrete for C20 mix. The increase in the RHA in the mixes resulted in the high demand for water in all the mixes.展开更多
Alum sludge is a typical by-product of drinking water treatment processes.Most sludge is disposed of at landfill sites,and such a disposal method may cause significant environmental concern due to its vast amount.This...Alum sludge is a typical by-product of drinking water treatment processes.Most sludge is disposed of at landfill sites,and such a disposal method may cause significant environmental concern due to its vast amount.This paper assessed the feasibility of reusing sludge as a supplementary cementitious material,which could efficiently exhaust stockpiled sludge.Specifically,the pozzolanic reactivity of sludge at different temperatures,the reaction mechanism of the sludge-cement binder,and the resistance of sludge-derived mortar to microbially induced corrosion were investigated.The obtained results indicated that 800℃ was the optimal calcination temperature for sludge.Mortar containing sludge up to 30%by weight showed comparable physical properties at a curing age of 90 days.Mortar with 10%cement replaced by sludge can significantly improve the resistance to biogenic corrosion due to the formation of Al-bearing phases with high resistance to acidic media,e.g.,Ca_(4)Al_(2)O_(7)·xH_(2)O and strätlingite.展开更多
基金financially supported by the Distinguished Youth Funds of National Natural Science Foundation of China(No.51925402)the Ten Thousand Talent Program of China for Leading Scientists in Science,Technology and Innovation,the Shanxi Science and Technology Major Project Funds(No.20201102004)+3 种基金the Shanxi“1331 Project”Fundsthe Shanxi Province Key Laboratory Construction Project Fundsthe Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(Nos.2021SX-TD001 and 2021SX-TD002)the Shanxi Province Postgraduate Education Innovation Project(No.2021Y191).
文摘The effect of calcination temperature on the pozzolanic activity of maize straw stem ash(MSSA)was evaluated.The MSSA samples calcined at temperature values of 500,700,and 850℃ were dissolved in portlandite solution for 6 h,thereby obtaining residual samples.The MSSA and MSSA residual samples were analyzed using Fourier transform infrared spectroscopy,X-ray powder diffraction scanning electron microscopy,and X-ray photoelectron spectroscopy to determine vibration bonds,minerals,microstructures,and Si 2p transformation behavior.The conductivity,pH value,and loss of conductivity with dissolving time of the MSSA-portlandite mixed solution were also determined.The main oxide composition of MSSA was silica and potassium oxide.The dissolution of the Si^(4+) content of MSSA at 500℃ was higher than those of the other calcination temperatures.The conductivity and loss of conductivity of MSSA at 700℃ were higher than those of the other calcination temperatures at a particular dissolving time due to the higher KCl content in MSSA at 700℃.C-S-H was easily identified in MSSA samples using X-ray powder diffraction,and small cubic and nearly spherical particles of C-S-H were found in the MSSA residual samples.In conclusion,the optimum calcination temperature of MSSA having the best pozzolanic activity is 500℃,but excessive agglomeration must be prevented.
文摘The results of investigation to assess the possibility of copper slag with high MgO to be used as a mineral admixture in concrete were reported in this study. The soundness of cement paste containing the slag has been examined by autoclave test. Pozzolanic activity of the slag was studied in comparison to fly ash. The slag was mixed calcium hydroxide and water,and the progress of the pozzolanic reaction was determined by X-ray diffraction,differential thermal analysis-thermogravimetry and scanning electron microscopy from 28 to 90 d. The experimental results showed that the autoclave expansion value of cement paste containing the slag was far below the expansion limit (0.8%). It can be conclude that the slag has little periclase content. The consumption of calcium hydroxide showed the slag exhibits high pozzolanic activity,which was higher than that of fly ash. Hence,use of the copper slag with high MgO but low periclase content as a mineral admixture in concrete seems feasible.
文摘This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the characterization of the tailings before and after calcination, chemical, mineralogical, thermogravimetric, and mechanical strength analyses were conducted. The results were compared with those for commonly used pozzolans, metakaolin, and similarities were identified. The study of the morphology of the particles before and after calcination was conducted through analyses of images obtained by scanning electronic microscope. The pozzolanic activity of the fine mining tailings calcined with flash technology was evaluated in uniaxial compression trials, which showed excellent results.
基金support received from Natural Science Foundation of Henan(Grant No.212300410018)National Natural Science Foundation of China(Grant No.U2040224)+1 种基金Program for Innovative Research Team(in Science and Technology)in University of Henan Province of China(Grant No.20IRTSTHN009)the Research and Develop Project of China Construction Seventh Engineering Division Co.,Ltd.(Grant No.CSCEC7b-2021-Z-11).
文摘Green and sustainable concrete has attracted significant attention from the construction industry and researchers since it was proposed.The ceramic waste materials are often directly buried in the ground or placed in an open dump,and the accumulation of ceramic waste contributes to environmental pollution,which makes the recycling of ceramic waste quite urgent.Owing to the pozzolanic activity,excellent mechanical properties and durability,industrial ceramic waste is considered as a suitable substitute for cement or natural aggregates to fabricate renewable concrete.In this paper,the pozzolanic activity of ceramic waste and the workability,mechanical performance,and durability of ceramic concrete are discussed.In addition,the most recent research results pertaining to ceramic concrete are reviewed.Ground ceramic powder improves the workability,compressive strength,resistance to chloride penetration,and carbonation resistance of concrete to a certain extent.Concrete containing ceramic as the aggregate has a lower mechanical performance than ordinary concrete.However,the resistance to chloride penetration,freeze-thaw resistance,and high-temperature resistance of ceramic concrete are remarkable.Ceramic concrete is environmentally friendly,requires fewer energy resources to manufacture than ordinary concrete,and has excellent engineering properties.However,further research is required for future engineering applications.
文摘The demand for alternative cementitious materials is on the rise,as the cement causes huge energy consumption and produces greenhouse gas emission.Additionally,there is economic potential for the construction industry to reuse wastes as supplementary building materials.The purpose of this study is to evaluate the potential of utilizing ferrochrome slag wastes in mortar as supplementary cementitious materials (SCMs),thereby achieving this double-sided goal.Thus,the mechanical and physical properties of ferrochrome slag wastes were investigated to be used as admixtures in concrete production.Three different cement mortar specimens were prepared by replacing cement with ferrochrome slag in ratios of 0,30%,and 60% by mass and flexural and compressive strengths of the specimens were determined at the ages of 7,28,56,90,and 180 days.Also,the effects of the ferrochrome slag replacement ratio on workability,setting time and volume expansion were revealed.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were also investigated to study the microstructural properties of the specimens containing ferrochrome slag.Based on the results,it is concluded that ferrochrome slag wastes have pozzolanic activity,therefore reusing them as SCMs in the cement and concrete industry is convenient.
文摘The cost of cement has made concrete production expensive such that the housing deficit in developing countries is on the rise despite all the efforts by governments and other stakeholders to produce affordable housing units for the populace. Ashes of agricultural products such as rice husk, known as mineral admixtures may have pozzolanic characteristics which would be more beneficial to the housing industry in terms of strength gain and economy than being pollutants to the environment. Rice Husk Ash (RHA), because of its finely divided form and very high silica content and amorphousness, proved to be useful for strength gain of Rice Husk Ash Concrete (RHAC). Rice husk ash was manufactured by uncontrolled burning, ground, sieved and replaced with cement at 0%, 5%, 10%, 15%, 20% and 25% in mass for the mixes C20, C25, C30 and C35 where their compressive strengths were verified at 3, 7, 14, 21, 28, 56, 90 and 180 days. The X-ray diffraction pattern list indicated amorphous as well as diffused peak of about 8000 counts of SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> representing crystalline structures identified as cristobalite. A physical examination of the RHA showed very fine appearance, grey color and specific gravity of 2.06. The chemical analysis also revealed the existence of oxide content to be 55.8% representing 0.78% of Fe</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">, 54% of SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> and 1.06% of Al</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">O</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;"> representing 20.23% lower than the minimum value of 70% required for pozzolans. Generally, the compressive strength values decreased as the RHA content in the mixes increased but when compared to the control concrete the optimum replacement percentage of Ordinary Portland Cement (OPC) with RHA at 5% showed an increase above the control concrete for C20 mix. The increase in the RHA in the mixes resulted in the high demand for water in all the mixes.
基金funded by ARC Research Hub for Nanoscience-based Construction Material Manufacturing,Grant No.IH150100006General Project of National Natural Science Foundation of China (No.51778523)SA Water for the research scholarship and financial support for this project.
文摘Alum sludge is a typical by-product of drinking water treatment processes.Most sludge is disposed of at landfill sites,and such a disposal method may cause significant environmental concern due to its vast amount.This paper assessed the feasibility of reusing sludge as a supplementary cementitious material,which could efficiently exhaust stockpiled sludge.Specifically,the pozzolanic reactivity of sludge at different temperatures,the reaction mechanism of the sludge-cement binder,and the resistance of sludge-derived mortar to microbially induced corrosion were investigated.The obtained results indicated that 800℃ was the optimal calcination temperature for sludge.Mortar containing sludge up to 30%by weight showed comparable physical properties at a curing age of 90 days.Mortar with 10%cement replaced by sludge can significantly improve the resistance to biogenic corrosion due to the formation of Al-bearing phases with high resistance to acidic media,e.g.,Ca_(4)Al_(2)O_(7)·xH_(2)O and strätlingite.
