Tree plantation and forest restoration are the major strategies for enhancing terrestrial carbon sequestration and mitigating climate change.The Grain for Green Project in China has positively impacted global carbon s...Tree plantation and forest restoration are the major strategies for enhancing terrestrial carbon sequestration and mitigating climate change.The Grain for Green Project in China has positively impacted global carbon sequestration and the trend towards fragmentation of plantation forests.Limited studies have been conducted on changes in plantation biomass and stand structure caused by fragmentation,and the effect of fragmentation on the carbon storage of plantation forests remains unclear.This study evaluated the differences between carbon storage and stand structure in black locust forests in fragmented and continuous landscape in the Ansai District,China and discussed the effects of ecological significance of four landscape indices on carbon storage and tree density.We used structural equation modelling to explore the direct and indirect effects of fragmentation,edge,abiotic factors,and stand structure on above-ground carbon storage.Diameter at breast height(DBH)in fragmented forests was 53.3%thicker,tree density was 40.9%lower,and carbon storage was 49.8%higher than those in continuous forests;for all given DBH>10 cm,the trees in fragmented forests were shorter than those in continuous forests.The patch area had a negative impact on carbon storage,i.e.,the higher the degree of fragmentation,the lower the density of the tree;and fragmentation and distance to edge(DTE)directly increased canopy coverage.However,canopy coverage directly decreased carbon storage,and fragmentation directly increased carbon storage and tree density.In non-commercial forests,fragmentation reduces the carbon storage potential of plantation,and the influence of patch area,edge,and patchy connection on plantation should be considered when follow-up trees are planted and for the plantation management.Thus,expanding the area of plantation patches,repairing the edges of complex-shaped patches,enhancing the connectivity of similar patches,and applying nutrients to plantation forests at regular intervals are recommended in fragmented areas of the Loess Plateau.展开更多
Hydraulic-electric rock fragmentation(HERF)plays a significant role in improving the efficiency of high voltage pulse rock breaking.However,the underlying mechanism of HERF remains unclear.In this study,considering th...Hydraulic-electric rock fragmentation(HERF)plays a significant role in improving the efficiency of high voltage pulse rock breaking.However,the underlying mechanism of HERF remains unclear.In this study,considering the heterogeneity of the rock,microscopic thermodynamic properties,and shockwave time domain waveforms,based on the shockwave model,digital imaging technology and the discrete element method,the cyclic loading numerical simulations of HERF is achieved by coupling electrical,thermal,and solid mechanics under different formation temperatures,confining pressure,initial peak voltage,electrode bit diameter,and loading times.Meanwhile,the HERF discharge system is conducive to the laboratory experiments with various electrical parameters and the resulting broken pits are numerically reconstructed to obtain the geometric parameters.The results show that,the completely broken area consists of powdery rock debris.In the pre-broken zone,the mineral cementation of the rock determines the transition of type CⅠcracks to type CⅡand type CⅢcracks.Furthermore,the peak pressure of the shockwave increased with initial peak voltage but decreased with electrode bit diameter,while the wave front time reduced.Moreover,increasing well depth,formation temperature and confining pressure augment and inhibit HERF,but once confining pressure surpassed the threshold of 60 MPa for 152.40,215.90,and 228.60 mm electrode bits,and 40 MPa for 309.88 mm electrode bits,HERF is promoted.Additionally,for the same kind of rock,the volume and width of the broken pit increase with higher initial peak voltage and rock fissures will promote HERF.Eventually,the electrode drill bit with a 215.90 mm diameter is more suitable for drilling pink granite.This research contributes to a better microscopic understanding of HERF and provides valuable insights for electrode bit selection,as well as the optimization of circuit parameters for HERF technology.展开更多
Objective:To determine the relationship between teratozoospermia and sperm DNA fragmentation(SDF)in the human ejaculate.Methods:This retrospective study included 100 normozoospermic men as a control cohort(abnormal fo...Objective:To determine the relationship between teratozoospermia and sperm DNA fragmentation(SDF)in the human ejaculate.Methods:This retrospective study included 100 normozoospermic men as a control cohort(abnormal forms>14%),210 patients with a high level of abnormal forms(≤4%)and 65 patients presenting with a moderate level of abnormal forms(>4%to≤14%)based on the World Health Organization definitions.Sperm morphology was assessed using bright field microscopy.Sperm DNA fragmentation was assessed using the sperm chromatin dispersion assay.Non-parametric analyses were conducted to examine the relationship between abnormal sperm morphology and sperm DNA fragmentation;receiver operating characteristic(ROC)analyses were conducted to assess sensitivity and specificity of this relationship.Results:A correlation analysis revealed that the higher the proportion of abnormal spermatozoa in the ejaculate,the higher the level of SDF(Spearman's Rho=-0.230;P<0.001).Significant differences in the proportion of SDF were found when all cohorts were compared(P<0.001);these significant differences were also retained when the different cohorts were compared pairwise.ROC analysis showed a moderate but significant predictive value for SDF to differentiate patients with different levels of teratozoospemia.Conclusions:Although analysis of a more continuous range of values for teratozoospermia would help further clarify any causal relationship with SDF,there is clearly a synergistic or coincident affiliation between these variables that needs to be acknowledged by the clinician when interpreting the spermiogram.展开更多
Prefabricated green buildings are becoming a trend in the construction industry of China.The prefabricated components are made using modern technologies like green materials,artificial intelligence,and low-carbon and ...Prefabricated green buildings are becoming a trend in the construction industry of China.The prefabricated components are made using modern technologies like green materials,artificial intelligence,and low-carbon and energy-saving techniques.This makes them an important aspect of the development of the construction industry in China,representing modernization and sustainable development.This article presents a study on the innovative design of prefabricated green buildings.This article serves to promote sustainable development on a macro level.展开更多
Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size ...Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.展开更多
BACKGROUND Acute pancreatitis(AP)is a disease featuring acute inflammation of the pancreas and histological destruction of acinar cells.Approximately 20%of AP patients progress to moderately severe or severe pancreati...BACKGROUND Acute pancreatitis(AP)is a disease featuring acute inflammation of the pancreas and histological destruction of acinar cells.Approximately 20%of AP patients progress to moderately severe or severe pancreatitis,with a case fatality rate of up to 30%.However,a single indicator that can serve as the gold standard for prognostic prediction has not been discovered.Therefore,gaining deeper insights into the underlying mechanism of AP progression and the evolution of the disease and exploring effective biomarkers are important for early diagnosis,progression evaluation,and precise treatment of AP.AIM To determine the regulatory mechanisms of tRNA-derived fragments(tRFs)in AP based on small RNA sequencing and experiments.METHODS Small RNA sequencing and functional enrichment analyses were performed to identify key tRFs and the potential mechanisms in AP.Reverse transcription quantitative polymerase chain reaction(RT-qPCR)was conducted to determine tRF expression.AP cell and mouse models were created to investigate the role of tRF36 in AP progression.Lipase,amylase,and cytokine levels were assayed to examine AP progression.Ferritin expression,reactive oxygen species,malondialdehyde,and ferric ion levels were assayed to evaluate cellular ferroptosis.RNA pull down assays and methylated RNA immunoprecipitation were performed to explore the molecular mechanisms.RESULTS RT-qPCR results showed that tRF36 was significantly upregulated in the serum of AP patients,compared to healthy controls.Functional enrichment analysis indicated that target genes of tRF36 were involved in ferroptosisrelated pathways,including the Hippo signaling pathway and ion transport.Moreover,the occurrence of pancreatic cell ferroptosis was detected in AP cells and mouse models.The results of interference experiments and AP cell models suggested that tRF-36 could promote AP progression through the regulation of ferroptosis.Furthermore,ferroptosis gene microarray,database prediction,and immunoprecipitation suggested that tRF-36 accelerated the progression of AP by recruiting insulin-like growth factor 2 mRNA binding protein 3(IGF2BP3)to the p53 mRNA m6A modification site by binding to IGF2BP3,which enhanced p53 mRNA stability and promoted the ferroptosis of pancreatic follicle cells.CONCLUSION In conclusion,regulation of nuclear pre-mRNA domain-containing protein 1B promoted AP development by regulating the ferroptosis of pancreatic cells,thereby acting as a prospective therapeutic target for AP.In addition,this study provided a basis for understanding the regulatory mechanisms of tRFs in AP.展开更多
To promote the development of timber-concrete composite(TCC)structures,it is necessary to propose the assembly-type connections with high assembly efficiency and shear performances.This article presented the experimen...To promote the development of timber-concrete composite(TCC)structures,it is necessary to propose the assembly-type connections with high assembly efficiency and shear performances.This article presented the experimental results of the innovative steel-plate connections for TCC beams using prefabricated concrete slabs.The steel-plate connections consisted of the screws and the steel-plates.The steel-plates were partly embedded in the concrete slabs.The concrete slabs and the timber beams were connected by screws through the steel-plates.The parameters researched in this article included screw number,angle steel as the reinforcement for anchoring,and shallow notches on the timber surface to restrict the slip of the steel-plates.Experimental results were discussed in terms of failure modes,ultimate bearing capacities,and slip moduli.It was found that increasing the number of screws could lead to the obvious improvement on the ultimate bearing capacities and the slip moduli at the ultimate state;and the angle steel as the reinforcement showed the slight influence on the ultimate bearing capacities and the slip moduli.The application of the shallow notch can greatly improve the ultimate bearing capacities and the slip moduli.The calculation models for the ultimate bearing capacities and the slip moduli of the steel-plate connections with and without shallow notches were proposed,which showed good accuracy compared with the experimental results.展开更多
Individual hydrocarbons identified to be macrocyclic alkanes in a torbanite from the Sydney Basin(Australia)were successfully isolated from its extracts using preparative gas chromatography and analyzed by NMR.Saturat...Individual hydrocarbons identified to be macrocyclic alkanes in a torbanite from the Sydney Basin(Australia)were successfully isolated from its extracts using preparative gas chromatography and analyzed by NMR.Saturated cyclic structures were confirmed by single peaks in the NMR~1H and~(13)C spectra indicating single forms of H and C atoms exist in these biomarker molecules.This is consistent with the methylene unit in a ring system assignment of the macrocyclic alkanes and accounts for a formula of(CH2)n.The unusual molecular structures of these compounds are consistent with those that were identified from previous GC retention index data and co-injection with a standard supports the previous research.The mass spectral fragmentation behaviors of representative cyclic alkanes were further investigated by comparing them with the mass spectra of isolated individual macrocyclic alkanes.The characteristic fragment ions in the macrocyclic alkanes of(M–28)+and base peaks of m/z 97,111,125,etc.,can be assigned as being generated by simple a-/i-cleavage and hydrogen rearrangement.These fragmentation pathways combined with retention indices should assist in differentiating these compounds from monounsaturated alkenes and alkylated monocyclics having similar mass spectral characteristics in other geological samples.展开更多
A simple finite element implementation of the Mott model for fragmentation of a thin walled ring has been implemented and used to explore the effect of local variations in fracture strain around the ring.The model has...A simple finite element implementation of the Mott model for fragmentation of a thin walled ring has been implemented and used to explore the effect of local variations in fracture strain around the ring.The model has successfully reproduced the fragment size distributions previously reported,which follow a characteristic“Mott distribution”form,providing sufficient(1000)simulations are run.It has been shown that this form is retained even when there are large differences in the random distribution of fracture strains or a different choice of function used to describe the fracture strain scatter.In these cases,the strain rate has a much stronger effect than fracture strain distribution the on the average fragment size and fragment distribution.However,for cases where there are a small number of local defects that strongly reduce the fracture strain at certain locations around the ring,the predicted fragment size distribution develops a bimodal character.This is also the case for large but gradual variations in fracture strain with position around the ring.The results have implications for cases where a small number of large pre-existing defects exist,or processing has led to macrozones in the microstructure.The utility of a simple fast running model to study these cases is discussed.展开更多
The hilly area of red soil in the central subtropical region of China has a long history of severe soil erosion due to its abundance of water,heat,and intense agricultural and forestry activities.The Sandshale red soi...The hilly area of red soil in the central subtropical region of China has a long history of severe soil erosion due to its abundance of water,heat,and intense agricultural and forestry activities.The Sandshale red soil area is hot and rainy,the local land utilization rate and replanting index are high,and the soil easily weathers and erodes,resulting in infertile and sandy soils,extensive soil erosion and large erosion,with far-reaching impacts.In this study,the stability of soil aggregates was studied by the wet sieving method and Le Bissonais(LB)method in six land use patterns in the Sandshale red soil area,including natural forest(NF),Pinus massoniana(PM),Eucalyptus urophylla×E.grandis(EU),orchard(OR),wasteland(WL)and arable land(AL).The transport damage characteristics of the soil aggregates under concentrated water flow were analyzed by using the soil aggregates to simulate the soil surface roughness in the field using a steel scouring flume with a variable slope.The results showed that:(1)the total soil porosity of the natural forest was the highest,with 56.51%in A layer,which was 4.99%higher than the B layer,and the organic matter content ranged from 10.69 to 29.94 g.kg-1 and was highest in NF and lowest in AL;(2)the maximum mean weight diameter(MWD)obtained by the wet sieving method was 4.81 mm for natural forest,and the MWD was the lowest in OR and AL at 2.45-2.77mm.The MWD measured by the LB method was also highest in NF and lowest in AL.The contents of Fed and Ald have a strong correlation with the stability parameters of soil aggregates;(3)the Wr/Wi results for the six land use patterns were NF>PM>EU>WL>OR>AL;the NF had the strongest soil aggregate stability,followed by WL,PM and EU,and AL and OR had the weakest;the stability of soil aggregates gradually weakened as the soil depth increased.Comprehensive analysis shows that forest land has high soil stability and obvious advantages in soil erosion resistance.Strengthening the construction of artificial forests can be an important means to reduce soil erosion in red soil hilly region.展开更多
The response of biological phantoms against high velocity impact is actively sought for applications in defense,space,soft robotics and sensing.Towards this end,we study the ballistic response of silicone based skin s...The response of biological phantoms against high velocity impact is actively sought for applications in defense,space,soft robotics and sensing.Towards this end,we study the ballistic response of silicone based skin simulant against fragment impact.Using a pneumatic gas gun setup,six chisel-nosed and three regular shaped(sphere,cylinder,and cube)fragments were impacted on the skin simulant.The resulting skin simulant response was studied in terms of ballistic limit velocities,energy densities,failure pattern,and the mechanics of interaction.The results indicate that the shape of the fragment affects the ballistic limit velocities.The ballistic limit velocities,energy densities of the chisel-nosed fragment simulating projectiles were relatively insensitive to the size(mass),except for the smallest(0.16 g)and largest(2.79 g)chisel-nosed fragment.For the same size(1 g),ballistic limit velocities and failure are dependent on the shape of the fragment.The skin simulant failed by combined plugging and elastic hole enlargement.Failure in the spherical fragment was dominated by the elastic hole enlargement,whereas plugging failure was dominant in all other fragments.The spherical,cylindrical,and chisel-nosed fragments created circular cavities,and the cubical fragment created a square cavity.In the case of the spherical fragment,slipping of the fragment within the skin simulant was seen.Cubical fragments created lateral cracks emanating from the corners of the square cavity.Interestingly,for all the fragments,the maximum deformation corresponding to the perforation was lower than the non-perforation indicating rate dependent,stress driven failure.The maximum deformation was also dependent on the shape of the fragment.Overall,these results provide unique insights into the mechanical response of a soft simulant against ballistic impact.Results have utility in the calibration and validation of computational models,design of personal protective equipment,and antipersonnel systems.展开更多
In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairin...In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairing interaction on the fragment mass distribution and its dependence on nuclear elongation.The significant role of pairing interactions in the fragment mass distributions of^(230)Th,^(234)U,^(240)Pu,and^(246)Cm was demonstrated.Numerical analysis revealed that increasing the pairing interaction strength decreased the asymmetric fragment mass distribution and increased the symmetric distribution.Furthermore,the odd-even mass differences at symmetric and asymmetric fission points were examined,highlighting their sensitivity to changes in the pairing interaction strength.Systematic analysis of the Th,U,Pu,and Cm isotope fragment mass distributions demonstrated the effectiveness of the model in reproducing the experimental data.In addition,the effects of the zero-point energy and half-width parameter on the fragment mass distribution for^(240)Pu were explored.Thus,this study provides valuable insights into the fission process by emphasizing the importance of pairing interactions and their relationship with nuclear elongation.展开更多
In the context of global emission reduction, the low-carbon sustainable development of the construction industry has become an important research content. With the vigorous development of new industrial technologies, ...In the context of global emission reduction, the low-carbon sustainable development of the construction industry has become an important research content. With the vigorous development of new industrial technologies, the application of prefabrication technology to buildings had become a mainstream. However, the research on the role of prefabricated technology in reducing building carbon emissions was not yet comprehensive, and the research on the relationship between prefabricated structure types and carbon emissions in the construction stage was not yet thorough. Guided by life cycle assessment (LCA), this paper used the scenario analysis method to set different working conditions for five different structural systems, and used SimaPro software to evaluate the carbon emissions of prefabricated buildings in order to clarify the carbon emissions of prefabricated buildings under different structural systems, and explore their impact mechanisms in depth. Finally, take the existing buildings in China as an empirical study, the results showed that: 1) The carbon emissions produced by the four common prefabricated structural systems were almost the same. Different structures had different requirements for the combination of components. The carbon emissions of individual buildings would be superimposed according to the carbon emission characteristics of various individual components to form the final total carbon emissions. 2) When the building structure system requires more combinations of components, the greater the amount of transportation invested in the transportation process, the more carbon emissions would be caused. In the calculation of all individual building construction stages, the carbon emissions generated by tower cranes almost exceed the sum of the carbon emissions of all mobile machinery. 3) Prefabricated shear wall structures and prefabricated frame-shear wall structures require a large amount of hoisting of prefabricated shear walls, so the carbon emissions of their mechanical equipment were also the highest.展开更多
When an explosion occurs close to or partially within the face of a concrete structure, fragments are rapidly launched from the opposite face of the structure owing to concrete spalling, posing a significant risk to n...When an explosion occurs close to or partially within the face of a concrete structure, fragments are rapidly launched from the opposite face of the structure owing to concrete spalling, posing a significant risk to nearby personnel and equipment. To study the lead fragment velocity of ultra-high-performance concrete(UHPC), partially embedded explosion experiments were performed on UHPC slabs of limited thickness using a cylindrical trinitrotoluene charge. The launch angles and velocities of the resulting fragments were the determined using images collected by high-speed camera to document the concrete spalling and fragment launching process. The results showed that UHPC slabs without fiber reinforcement had a fragment velocity distribution of 0-118.3 m/s, which are largely identical to that for a normal-strength concrete(NSC) slab. In addition, the fragment velocity was negatively correlated to the angle between the velocity vector and vertical direction. An empirical Eq. for the lead spall velocity of UHPC and NSC slabs was then proposed based on a large volume of existing experimental data.展开更多
This study investigated the failure mechanism associated with the rock mass structure and the dynamic fragmentation process of blocky rocks of the 2018 Daanshan rockslide that occurred on 11 August,2018.It was found t...This study investigated the failure mechanism associated with the rock mass structure and the dynamic fragmentation process of blocky rocks of the 2018 Daanshan rockslide that occurred on 11 August,2018.It was found that the initially collapsed rock of this rockslide was partitioned along the unconformity and strata interfaces.We analyzed how the unique rock mass structure,coupled with the road cut and the antecedent rainfall,jointly resulted in its failure.Based on the rock types and geological structures,the initial stratified configuration of a discrete element model was setup to reveal the influences of the local structure.The numerical model was divided into three parts.Part 1 is the basalt of the Nandaling Formation,the normal and shear stiffnesses of the basalt particles are set as 80 MPa and 40 MPa.Parts 2 and 3 are the sandstones interbedded with mudstone and sandstone of the Shihezi Formation,and the normal and shear stiffnesses of these parts were set as 6 MPa and 10 MPa,respectively.The dynamic process of the rockslide,particularly the rock fragmentation process,was numerically analyzed using a 3D discrete element method.The numerical results were compared with real-time videos and field investigations.The results show that the rock fragmentation and the final deposition range match well with the real disaster phenomenon,and the calculation accuracy of the rockslide reaches 82.41%.Moreover,a parameter sensitivity analysis was conducted,and classical uniform models under different bonding forces were established;the stratified model can better restore the true state of the fragmentation,movement,and deposition processes of rockslides.Therefore,for complicated rocks with significant differences in lithology,clarifying the rock mass stratigraphy is essential for an accurate reconstruction of the dynamic process of rockslides.展开更多
Foreign bodies are a rare cause of appendicitis, because in most cases these ingested foreign bodies cross the digestive tract asymptomatically [1] [2] [3]. However, some penetrate the lumen of the appendix causing it...Foreign bodies are a rare cause of appendicitis, because in most cases these ingested foreign bodies cross the digestive tract asymptomatically [1] [2] [3]. However, some penetrate the lumen of the appendix causing its inflammation. We report an unusual observation of acute appendicitis induced by a foreign body namely a bone fragment in the visceral surgery department of the Centre Hospitalier Intercommunal de Villeneuve Saint-Georges.展开更多
From the empirical phenomena of fragment distributions in nuclear spallation reactions,semiempirical formulas named SPAGINS were constructed to predict fragment cross-sections in high-energyγ-induced nuclear spallati...From the empirical phenomena of fragment distributions in nuclear spallation reactions,semiempirical formulas named SPAGINS were constructed to predict fragment cross-sections in high-energyγ-induced nuclear spallation reactions(PNSR).In constructing the SPAGINS formulas,theoretical models,including the TALYS toolkit,SPACS,and Rudstam formulas,were employed to study the general phenomenon of fragment distributions in PNSR with incident energies ranging from 100 to 1000 MeV.Considering the primary characteristics of PNSR,the SPAGINS formulas modify the EPAX and SPACS formulas and efficiently reproduce the measured data.The SPAGINS formulas provide a new and effective tool for predicting fragment production in PNSR.展开更多
This study investigates how the debris cloud structure and hazardous fragment distribution vary with attack angle by simulating a circular cylinder projectile hypervelocity impinging on a thin plate using the finite e...This study investigates how the debris cloud structure and hazardous fragment distribution vary with attack angle by simulating a circular cylinder projectile hypervelocity impinging on a thin plate using the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method.Based on the comparison and analysis of the experimental and simulation results,the FE-SPH adaptive method was applied to address the hypervelocity yaw impact problem,and the variation law of the debris cloud structure with the attack angle was obtained.The screening criterion of the hazardous fragment at yaw impact is given by analyzing the debris formation obtained by the FE-SPH adaptive method,and the distribution characteristics of hazardous fragments and their relationship with the attack angle are given.Moreover,the velocity space was used to evaluate the distribution range and damage capability of asymmetric hazardous fragments.The maximum velocity angle was extended from fully symmetrical working conditions to asymmetrical cases to describe the asymmetrical debris cloud distribution range.In this range,the energy density was calculated to quantitatively analyze how much damage hazardous fragments inflict on the rear plate.The results showed that the number of hazardous fragments generated by the case near the 35°attack angle was the largest,the distribution range was the smallest,and the energy density was the largest.These results suggest that in this case,debris cloud generated by the impact had the strongest damage to the rear plate.展开更多
High-voltage pulse discharge(HVPD)rock fragmentation controls a plasma channel forming inside the rock by adjusting the electrical parameters,electrode type,etc.In this work,an HVPD rock fragmentation test platform wa...High-voltage pulse discharge(HVPD)rock fragmentation controls a plasma channel forming inside the rock by adjusting the electrical parameters,electrode type,etc.In this work,an HVPD rock fragmentation test platform was built and the test waveforms were measured.Considering the effects of temperature,channel expansion and electromagnetic radiation,the impedance model of the plasma channel in the rock was established.The parameters and initial values of the model were determined by an iterative computational process.The model calculation results can reasonably characterize the development of the plasma channel in the rock and estimate the shock wave characteristics.Based on the plasma channel impedance model,the temporal and spatial distribution characteristics of the radial stress and tangential stress in the rock were calculated,and the rock fragmentation effect of the HVPD was analyzed.展开更多
The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic perf...The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic performance is still under debate.In this study,two Y6-like acceptors BDOTP-1 and BDOTP-2 were designed.Different from previous Y6-type acceptors featuring an A–D–Aʹ–D–A structure,BDOTP-1,and BDOTP-2 have no electron-deficient Aʹfragment in the core unit.Instead,there is an electron-rich dibenzodioxine fragment in the core.Although this modification leads to a marked change in the molecular dipole moment,electrostatic potential,frontier orbitals,and energy levels,BDOTP acceptors retain similar three-dimensional packing capability as Y6-type acceptors due to the similar banana-shaped molecular configuration.BDOTP acceptors show good performance in OSCs.High PCEs of up to 18.51%(certified 17.9%)are achieved.This study suggests that the banana-shaped configuration instead of the A–D–Aʹ–D–A structure is likely to be the determining factor in realizing high photovoltaic performance.展开更多
基金supported by the National Natural Science Foundation of China(32201429)the College of Landscape Architecture and Art,Northwest A&F University,China.
文摘Tree plantation and forest restoration are the major strategies for enhancing terrestrial carbon sequestration and mitigating climate change.The Grain for Green Project in China has positively impacted global carbon sequestration and the trend towards fragmentation of plantation forests.Limited studies have been conducted on changes in plantation biomass and stand structure caused by fragmentation,and the effect of fragmentation on the carbon storage of plantation forests remains unclear.This study evaluated the differences between carbon storage and stand structure in black locust forests in fragmented and continuous landscape in the Ansai District,China and discussed the effects of ecological significance of four landscape indices on carbon storage and tree density.We used structural equation modelling to explore the direct and indirect effects of fragmentation,edge,abiotic factors,and stand structure on above-ground carbon storage.Diameter at breast height(DBH)in fragmented forests was 53.3%thicker,tree density was 40.9%lower,and carbon storage was 49.8%higher than those in continuous forests;for all given DBH>10 cm,the trees in fragmented forests were shorter than those in continuous forests.The patch area had a negative impact on carbon storage,i.e.,the higher the degree of fragmentation,the lower the density of the tree;and fragmentation and distance to edge(DTE)directly increased canopy coverage.However,canopy coverage directly decreased carbon storage,and fragmentation directly increased carbon storage and tree density.In non-commercial forests,fragmentation reduces the carbon storage potential of plantation,and the influence of patch area,edge,and patchy connection on plantation should be considered when follow-up trees are planted and for the plantation management.Thus,expanding the area of plantation patches,repairing the edges of complex-shaped patches,enhancing the connectivity of similar patches,and applying nutrients to plantation forests at regular intervals are recommended in fragmented areas of the Loess Plateau.
基金supported by the National Natural Science Foundation of China(Nos.52034006,52004229,52225401,and 52274231)the Regional Innovation Cooperation Project of Sichuan Province(No.2022YFQ0059)+3 种基金Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(No.2020CX040301)Natural Science Foundation of Sichuan Province(No.2023NSFSC0431)Science and Technology Strategic Cooperation Project between Nanchong City and Southwest Petroleum University(No.SXHZ004)Research and innovation Fund for Graduate Students of Southwest Petroleum University(No.2022KYCX058).
文摘Hydraulic-electric rock fragmentation(HERF)plays a significant role in improving the efficiency of high voltage pulse rock breaking.However,the underlying mechanism of HERF remains unclear.In this study,considering the heterogeneity of the rock,microscopic thermodynamic properties,and shockwave time domain waveforms,based on the shockwave model,digital imaging technology and the discrete element method,the cyclic loading numerical simulations of HERF is achieved by coupling electrical,thermal,and solid mechanics under different formation temperatures,confining pressure,initial peak voltage,electrode bit diameter,and loading times.Meanwhile,the HERF discharge system is conducive to the laboratory experiments with various electrical parameters and the resulting broken pits are numerically reconstructed to obtain the geometric parameters.The results show that,the completely broken area consists of powdery rock debris.In the pre-broken zone,the mineral cementation of the rock determines the transition of type CⅠcracks to type CⅡand type CⅢcracks.Furthermore,the peak pressure of the shockwave increased with initial peak voltage but decreased with electrode bit diameter,while the wave front time reduced.Moreover,increasing well depth,formation temperature and confining pressure augment and inhibit HERF,but once confining pressure surpassed the threshold of 60 MPa for 152.40,215.90,and 228.60 mm electrode bits,and 40 MPa for 309.88 mm electrode bits,HERF is promoted.Additionally,for the same kind of rock,the volume and width of the broken pit increase with higher initial peak voltage and rock fissures will promote HERF.Eventually,the electrode drill bit with a 215.90 mm diameter is more suitable for drilling pink granite.This research contributes to a better microscopic understanding of HERF and provides valuable insights for electrode bit selection,as well as the optimization of circuit parameters for HERF technology.
文摘Objective:To determine the relationship between teratozoospermia and sperm DNA fragmentation(SDF)in the human ejaculate.Methods:This retrospective study included 100 normozoospermic men as a control cohort(abnormal forms>14%),210 patients with a high level of abnormal forms(≤4%)and 65 patients presenting with a moderate level of abnormal forms(>4%to≤14%)based on the World Health Organization definitions.Sperm morphology was assessed using bright field microscopy.Sperm DNA fragmentation was assessed using the sperm chromatin dispersion assay.Non-parametric analyses were conducted to examine the relationship between abnormal sperm morphology and sperm DNA fragmentation;receiver operating characteristic(ROC)analyses were conducted to assess sensitivity and specificity of this relationship.Results:A correlation analysis revealed that the higher the proportion of abnormal spermatozoa in the ejaculate,the higher the level of SDF(Spearman's Rho=-0.230;P<0.001).Significant differences in the proportion of SDF were found when all cohorts were compared(P<0.001);these significant differences were also retained when the different cohorts were compared pairwise.ROC analysis showed a moderate but significant predictive value for SDF to differentiate patients with different levels of teratozoospemia.Conclusions:Although analysis of a more continuous range of values for teratozoospermia would help further clarify any causal relationship with SDF,there is clearly a synergistic or coincident affiliation between these variables that needs to be acknowledged by the clinician when interpreting the spermiogram.
文摘Prefabricated green buildings are becoming a trend in the construction industry of China.The prefabricated components are made using modern technologies like green materials,artificial intelligence,and low-carbon and energy-saving techniques.This makes them an important aspect of the development of the construction industry in China,representing modernization and sustainable development.This article presents a study on the innovative design of prefabricated green buildings.This article serves to promote sustainable development on a macro level.
基金financially supported by the National Key Research&Development Project(2017YFB1103505)the Military Logistics Research Program(XXXC002)of China。
文摘Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.
基金the National Natural Science Foundation of China,No.81860424.
文摘BACKGROUND Acute pancreatitis(AP)is a disease featuring acute inflammation of the pancreas and histological destruction of acinar cells.Approximately 20%of AP patients progress to moderately severe or severe pancreatitis,with a case fatality rate of up to 30%.However,a single indicator that can serve as the gold standard for prognostic prediction has not been discovered.Therefore,gaining deeper insights into the underlying mechanism of AP progression and the evolution of the disease and exploring effective biomarkers are important for early diagnosis,progression evaluation,and precise treatment of AP.AIM To determine the regulatory mechanisms of tRNA-derived fragments(tRFs)in AP based on small RNA sequencing and experiments.METHODS Small RNA sequencing and functional enrichment analyses were performed to identify key tRFs and the potential mechanisms in AP.Reverse transcription quantitative polymerase chain reaction(RT-qPCR)was conducted to determine tRF expression.AP cell and mouse models were created to investigate the role of tRF36 in AP progression.Lipase,amylase,and cytokine levels were assayed to examine AP progression.Ferritin expression,reactive oxygen species,malondialdehyde,and ferric ion levels were assayed to evaluate cellular ferroptosis.RNA pull down assays and methylated RNA immunoprecipitation were performed to explore the molecular mechanisms.RESULTS RT-qPCR results showed that tRF36 was significantly upregulated in the serum of AP patients,compared to healthy controls.Functional enrichment analysis indicated that target genes of tRF36 were involved in ferroptosisrelated pathways,including the Hippo signaling pathway and ion transport.Moreover,the occurrence of pancreatic cell ferroptosis was detected in AP cells and mouse models.The results of interference experiments and AP cell models suggested that tRF-36 could promote AP progression through the regulation of ferroptosis.Furthermore,ferroptosis gene microarray,database prediction,and immunoprecipitation suggested that tRF-36 accelerated the progression of AP by recruiting insulin-like growth factor 2 mRNA binding protein 3(IGF2BP3)to the p53 mRNA m6A modification site by binding to IGF2BP3,which enhanced p53 mRNA stability and promoted the ferroptosis of pancreatic follicle cells.CONCLUSION In conclusion,regulation of nuclear pre-mRNA domain-containing protein 1B promoted AP development by regulating the ferroptosis of pancreatic cells,thereby acting as a prospective therapeutic target for AP.In addition,this study provided a basis for understanding the regulatory mechanisms of tRFs in AP.
基金sponsored by the National Natural Science Foundation of China(Grant No.51878344)the Postdoctoral Foundation of Jiangsu Province(Grant No.2021K128B).
文摘To promote the development of timber-concrete composite(TCC)structures,it is necessary to propose the assembly-type connections with high assembly efficiency and shear performances.This article presented the experimental results of the innovative steel-plate connections for TCC beams using prefabricated concrete slabs.The steel-plate connections consisted of the screws and the steel-plates.The steel-plates were partly embedded in the concrete slabs.The concrete slabs and the timber beams were connected by screws through the steel-plates.The parameters researched in this article included screw number,angle steel as the reinforcement for anchoring,and shallow notches on the timber surface to restrict the slip of the steel-plates.Experimental results were discussed in terms of failure modes,ultimate bearing capacities,and slip moduli.It was found that increasing the number of screws could lead to the obvious improvement on the ultimate bearing capacities and the slip moduli at the ultimate state;and the angle steel as the reinforcement showed the slight influence on the ultimate bearing capacities and the slip moduli.The application of the shallow notch can greatly improve the ultimate bearing capacities and the slip moduli.The calculation models for the ultimate bearing capacities and the slip moduli of the steel-plate connections with and without shallow notches were proposed,which showed good accuracy compared with the experimental results.
基金the financial support from The Strategic Priority Research Program of the Chinese Academy of Sciences(XDA14010102)Chinese National Science Foundation grants(4197306941673045)。
文摘Individual hydrocarbons identified to be macrocyclic alkanes in a torbanite from the Sydney Basin(Australia)were successfully isolated from its extracts using preparative gas chromatography and analyzed by NMR.Saturated cyclic structures were confirmed by single peaks in the NMR~1H and~(13)C spectra indicating single forms of H and C atoms exist in these biomarker molecules.This is consistent with the methylene unit in a ring system assignment of the macrocyclic alkanes and accounts for a formula of(CH2)n.The unusual molecular structures of these compounds are consistent with those that were identified from previous GC retention index data and co-injection with a standard supports the previous research.The mass spectral fragmentation behaviors of representative cyclic alkanes were further investigated by comparing them with the mass spectra of isolated individual macrocyclic alkanes.The characteristic fragment ions in the macrocyclic alkanes of(M–28)+and base peaks of m/z 97,111,125,etc.,can be assigned as being generated by simple a-/i-cleavage and hydrogen rearrangement.These fragmentation pathways combined with retention indices should assist in differentiating these compounds from monounsaturated alkenes and alkylated monocyclics having similar mass spectral characteristics in other geological samples.
基金funding through the LightForm program grant EP/R001715/1
文摘A simple finite element implementation of the Mott model for fragmentation of a thin walled ring has been implemented and used to explore the effect of local variations in fracture strain around the ring.The model has successfully reproduced the fragment size distributions previously reported,which follow a characteristic“Mott distribution”form,providing sufficient(1000)simulations are run.It has been shown that this form is retained even when there are large differences in the random distribution of fracture strains or a different choice of function used to describe the fracture strain scatter.In these cases,the strain rate has a much stronger effect than fracture strain distribution the on the average fragment size and fragment distribution.However,for cases where there are a small number of local defects that strongly reduce the fracture strain at certain locations around the ring,the predicted fragment size distribution develops a bimodal character.This is also the case for large but gradual variations in fracture strain with position around the ring.The results have implications for cases where a small number of large pre-existing defects exist,or processing has led to macrozones in the microstructure.The utility of a simple fast running model to study these cases is discussed.
基金financial support for the research provided by the National Natural Science Foundation of China(No.42107350)the Special Projects of the Central Government Guiding Local Science and Technology Development in China(Guike.ZY21195022)the National Natural Science Foundation of China(No.42007055)。
文摘The hilly area of red soil in the central subtropical region of China has a long history of severe soil erosion due to its abundance of water,heat,and intense agricultural and forestry activities.The Sandshale red soil area is hot and rainy,the local land utilization rate and replanting index are high,and the soil easily weathers and erodes,resulting in infertile and sandy soils,extensive soil erosion and large erosion,with far-reaching impacts.In this study,the stability of soil aggregates was studied by the wet sieving method and Le Bissonais(LB)method in six land use patterns in the Sandshale red soil area,including natural forest(NF),Pinus massoniana(PM),Eucalyptus urophylla×E.grandis(EU),orchard(OR),wasteland(WL)and arable land(AL).The transport damage characteristics of the soil aggregates under concentrated water flow were analyzed by using the soil aggregates to simulate the soil surface roughness in the field using a steel scouring flume with a variable slope.The results showed that:(1)the total soil porosity of the natural forest was the highest,with 56.51%in A layer,which was 4.99%higher than the B layer,and the organic matter content ranged from 10.69 to 29.94 g.kg-1 and was highest in NF and lowest in AL;(2)the maximum mean weight diameter(MWD)obtained by the wet sieving method was 4.81 mm for natural forest,and the MWD was the lowest in OR and AL at 2.45-2.77mm.The MWD measured by the LB method was also highest in NF and lowest in AL.The contents of Fed and Ald have a strong correlation with the stability parameters of soil aggregates;(3)the Wr/Wi results for the six land use patterns were NF>PM>EU>WL>OR>AL;the NF had the strongest soil aggregate stability,followed by WL,PM and EU,and AL and OR had the weakest;the stability of soil aggregates gradually weakened as the soil depth increased.Comprehensive analysis shows that forest land has high soil stability and obvious advantages in soil erosion resistance.Strengthening the construction of artificial forests can be an important means to reduce soil erosion in red soil hilly region.
文摘The response of biological phantoms against high velocity impact is actively sought for applications in defense,space,soft robotics and sensing.Towards this end,we study the ballistic response of silicone based skin simulant against fragment impact.Using a pneumatic gas gun setup,six chisel-nosed and three regular shaped(sphere,cylinder,and cube)fragments were impacted on the skin simulant.The resulting skin simulant response was studied in terms of ballistic limit velocities,energy densities,failure pattern,and the mechanics of interaction.The results indicate that the shape of the fragment affects the ballistic limit velocities.The ballistic limit velocities,energy densities of the chisel-nosed fragment simulating projectiles were relatively insensitive to the size(mass),except for the smallest(0.16 g)and largest(2.79 g)chisel-nosed fragment.For the same size(1 g),ballistic limit velocities and failure are dependent on the shape of the fragment.The skin simulant failed by combined plugging and elastic hole enlargement.Failure in the spherical fragment was dominated by the elastic hole enlargement,whereas plugging failure was dominant in all other fragments.The spherical,cylindrical,and chisel-nosed fragments created circular cavities,and the cubical fragment created a square cavity.In the case of the spherical fragment,slipping of the fragment within the skin simulant was seen.Cubical fragments created lateral cracks emanating from the corners of the square cavity.Interestingly,for all the fragments,the maximum deformation corresponding to the perforation was lower than the non-perforation indicating rate dependent,stress driven failure.The maximum deformation was also dependent on the shape of the fragment.Overall,these results provide unique insights into the mechanical response of a soft simulant against ballistic impact.Results have utility in the calibration and validation of computational models,design of personal protective equipment,and antipersonnel systems.
基金This work was supported by the National Natural Science Foundation of China(Nos.12275115 and 12175097)the Educational Department of Liaoning Province(No.LJKMZ20221410).
文摘In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairing interaction on the fragment mass distribution and its dependence on nuclear elongation.The significant role of pairing interactions in the fragment mass distributions of^(230)Th,^(234)U,^(240)Pu,and^(246)Cm was demonstrated.Numerical analysis revealed that increasing the pairing interaction strength decreased the asymmetric fragment mass distribution and increased the symmetric distribution.Furthermore,the odd-even mass differences at symmetric and asymmetric fission points were examined,highlighting their sensitivity to changes in the pairing interaction strength.Systematic analysis of the Th,U,Pu,and Cm isotope fragment mass distributions demonstrated the effectiveness of the model in reproducing the experimental data.In addition,the effects of the zero-point energy and half-width parameter on the fragment mass distribution for^(240)Pu were explored.Thus,this study provides valuable insights into the fission process by emphasizing the importance of pairing interactions and their relationship with nuclear elongation.
文摘In the context of global emission reduction, the low-carbon sustainable development of the construction industry has become an important research content. With the vigorous development of new industrial technologies, the application of prefabrication technology to buildings had become a mainstream. However, the research on the role of prefabricated technology in reducing building carbon emissions was not yet comprehensive, and the research on the relationship between prefabricated structure types and carbon emissions in the construction stage was not yet thorough. Guided by life cycle assessment (LCA), this paper used the scenario analysis method to set different working conditions for five different structural systems, and used SimaPro software to evaluate the carbon emissions of prefabricated buildings in order to clarify the carbon emissions of prefabricated buildings under different structural systems, and explore their impact mechanisms in depth. Finally, take the existing buildings in China as an empirical study, the results showed that: 1) The carbon emissions produced by the four common prefabricated structural systems were almost the same. Different structures had different requirements for the combination of components. The carbon emissions of individual buildings would be superimposed according to the carbon emission characteristics of various individual components to form the final total carbon emissions. 2) When the building structure system requires more combinations of components, the greater the amount of transportation invested in the transportation process, the more carbon emissions would be caused. In the calculation of all individual building construction stages, the carbon emissions generated by tower cranes almost exceed the sum of the carbon emissions of all mobile machinery. 3) Prefabricated shear wall structures and prefabricated frame-shear wall structures require a large amount of hoisting of prefabricated shear walls, so the carbon emissions of their mechanical equipment were also the highest.
基金supported by the National Natural Science Foundation of China[No.51978166]。
文摘When an explosion occurs close to or partially within the face of a concrete structure, fragments are rapidly launched from the opposite face of the structure owing to concrete spalling, posing a significant risk to nearby personnel and equipment. To study the lead fragment velocity of ultra-high-performance concrete(UHPC), partially embedded explosion experiments were performed on UHPC slabs of limited thickness using a cylindrical trinitrotoluene charge. The launch angles and velocities of the resulting fragments were the determined using images collected by high-speed camera to document the concrete spalling and fragment launching process. The results showed that UHPC slabs without fiber reinforcement had a fragment velocity distribution of 0-118.3 m/s, which are largely identical to that for a normal-strength concrete(NSC) slab. In addition, the fragment velocity was negatively correlated to the angle between the velocity vector and vertical direction. An empirical Eq. for the lead spall velocity of UHPC and NSC slabs was then proposed based on a large volume of existing experimental data.
基金funded by the Strategic Priority Research Program of CAS(Grant No.XDA23090303)the NSFC(Grant No.42022054)+1 种基金Sichuan Science and Technology Program(Grant No.2022YFS0543)the Science Foundation for Distinguished Young Scholars of Sichuan Province(Grant No.2020JDJQ0044)State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project(SKLGP2019Z013).
文摘This study investigated the failure mechanism associated with the rock mass structure and the dynamic fragmentation process of blocky rocks of the 2018 Daanshan rockslide that occurred on 11 August,2018.It was found that the initially collapsed rock of this rockslide was partitioned along the unconformity and strata interfaces.We analyzed how the unique rock mass structure,coupled with the road cut and the antecedent rainfall,jointly resulted in its failure.Based on the rock types and geological structures,the initial stratified configuration of a discrete element model was setup to reveal the influences of the local structure.The numerical model was divided into three parts.Part 1 is the basalt of the Nandaling Formation,the normal and shear stiffnesses of the basalt particles are set as 80 MPa and 40 MPa.Parts 2 and 3 are the sandstones interbedded with mudstone and sandstone of the Shihezi Formation,and the normal and shear stiffnesses of these parts were set as 6 MPa and 10 MPa,respectively.The dynamic process of the rockslide,particularly the rock fragmentation process,was numerically analyzed using a 3D discrete element method.The numerical results were compared with real-time videos and field investigations.The results show that the rock fragmentation and the final deposition range match well with the real disaster phenomenon,and the calculation accuracy of the rockslide reaches 82.41%.Moreover,a parameter sensitivity analysis was conducted,and classical uniform models under different bonding forces were established;the stratified model can better restore the true state of the fragmentation,movement,and deposition processes of rockslides.Therefore,for complicated rocks with significant differences in lithology,clarifying the rock mass stratigraphy is essential for an accurate reconstruction of the dynamic process of rockslides.
文摘Foreign bodies are a rare cause of appendicitis, because in most cases these ingested foreign bodies cross the digestive tract asymptomatically [1] [2] [3]. However, some penetrate the lumen of the appendix causing its inflammation. We report an unusual observation of acute appendicitis induced by a foreign body namely a bone fragment in the visceral surgery department of the Centre Hospitalier Intercommunal de Villeneuve Saint-Georges.
基金supported by the Program for Innovative Research Team(in Science and Technology)in University of Henan Province(No.21IRTSTHN011),China。
文摘From the empirical phenomena of fragment distributions in nuclear spallation reactions,semiempirical formulas named SPAGINS were constructed to predict fragment cross-sections in high-energyγ-induced nuclear spallation reactions(PNSR).In constructing the SPAGINS formulas,theoretical models,including the TALYS toolkit,SPACS,and Rudstam formulas,were employed to study the general phenomenon of fragment distributions in PNSR with incident energies ranging from 100 to 1000 MeV.Considering the primary characteristics of PNSR,the SPAGINS formulas modify the EPAX and SPACS formulas and efficiently reproduce the measured data.The SPAGINS formulas provide a new and effective tool for predicting fragment production in PNSR.
基金supported by the National Natural Science Foundation of China(Grant No.11872118,11627901)。
文摘This study investigates how the debris cloud structure and hazardous fragment distribution vary with attack angle by simulating a circular cylinder projectile hypervelocity impinging on a thin plate using the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method.Based on the comparison and analysis of the experimental and simulation results,the FE-SPH adaptive method was applied to address the hypervelocity yaw impact problem,and the variation law of the debris cloud structure with the attack angle was obtained.The screening criterion of the hazardous fragment at yaw impact is given by analyzing the debris formation obtained by the FE-SPH adaptive method,and the distribution characteristics of hazardous fragments and their relationship with the attack angle are given.Moreover,the velocity space was used to evaluate the distribution range and damage capability of asymmetric hazardous fragments.The maximum velocity angle was extended from fully symmetrical working conditions to asymmetrical cases to describe the asymmetrical debris cloud distribution range.In this range,the energy density was calculated to quantitatively analyze how much damage hazardous fragments inflict on the rear plate.The results showed that the number of hazardous fragments generated by the case near the 35°attack angle was the largest,the distribution range was the smallest,and the energy density was the largest.These results suggest that in this case,debris cloud generated by the impact had the strongest damage to the rear plate.
基金support of National Natural Science Foundation of China(No.52177144)。
文摘High-voltage pulse discharge(HVPD)rock fragmentation controls a plasma channel forming inside the rock by adjusting the electrical parameters,electrode type,etc.In this work,an HVPD rock fragmentation test platform was built and the test waveforms were measured.Considering the effects of temperature,channel expansion and electromagnetic radiation,the impedance model of the plasma channel in the rock was established.The parameters and initial values of the model were determined by an iterative computational process.The model calculation results can reasonably characterize the development of the plasma channel in the rock and estimate the shock wave characteristics.Based on the plasma channel impedance model,the temporal and spatial distribution characteristics of the radial stress and tangential stress in the rock were calculated,and the rock fragmentation effect of the HVPD was analyzed.
基金the open research fund of the Songshan Lake Materials Laboratory(2021SLABFK02)the National Key Research and Development Program of China(2017YFA0206600)the National Natural Science Foundation of China(51922032 and 21961160720).
文摘The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic performance is still under debate.In this study,two Y6-like acceptors BDOTP-1 and BDOTP-2 were designed.Different from previous Y6-type acceptors featuring an A–D–Aʹ–D–A structure,BDOTP-1,and BDOTP-2 have no electron-deficient Aʹfragment in the core unit.Instead,there is an electron-rich dibenzodioxine fragment in the core.Although this modification leads to a marked change in the molecular dipole moment,electrostatic potential,frontier orbitals,and energy levels,BDOTP acceptors retain similar three-dimensional packing capability as Y6-type acceptors due to the similar banana-shaped molecular configuration.BDOTP acceptors show good performance in OSCs.High PCEs of up to 18.51%(certified 17.9%)are achieved.This study suggests that the banana-shaped configuration instead of the A–D–Aʹ–D–A structure is likely to be the determining factor in realizing high photovoltaic performance.
