Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control.The fragment spatial distribution of prismatic casings is more complex than that of traditional c...Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control.The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings.In this study,numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted.A new numerical method,which adds the Lagrangian marker points to the Eulerian grid,was proposed to track the multi-material interfaces and material dynamic fractures.Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship.Thereafter,the fragment spatial distributions of the prismatic casing with different fragment sizes,fragment shapes,and casing geometries were obtained using the numerical method.Moreover,fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes,and the experimental data were compared with the numerical results.The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data.Finally,a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.展开更多
This paper describes a dynamic simulation system for manufacturing prismatic components on machining centers named NCDSS. It is a subsystem of CAD/CAPP/NC integrated system for prismatic parts that we are working on. ...This paper describes a dynamic simulation system for manufacturing prismatic components on machining centers named NCDSS. It is a subsystem of CAD/CAPP/NC integrated system for prismatic parts that we are working on. Based on the system of CAD and CAPP, it can automati. cally generate NC program used on machining centers and can simulate the machining process in the sequence of technology. Techniques of automatically producing NC program for prismaic parts and the method of dynamic simulation are also discussed.展开更多
The fracture toughness and fracture work of A12O3/SiC prismatic ceramic composites was evaluated in this paper, which showed the fracture energy was improved greatly. Based on the observation ’for crack propagation a...The fracture toughness and fracture work of A12O3/SiC prismatic ceramic composites was evaluated in this paper, which showed the fracture energy was improved greatly. Based on the observation ’for crack propagation and fracture morphology, the fracture behavior of the prismatic composites was analyzed. In the bending test, the composites displayed a non-catastrophic behavior and a graceful failure with reasonable load-carrying capability.展开更多
The field of solid modeling has created numerous techniques for unambiguous computer representations of three-dimensional objects. Its data structures and algorithms have been used in a broad range of applications: Co...The field of solid modeling has created numerous techniques for unambiguous computer representations of three-dimensional objects. Its data structures and algorithms have been used in a broad range of applications: Computer-Aided Design and Computer-Aided Manufacturing (CAD/ CAM), robotics, computer vision, computer graphics and visualization, virtual reality, etc. This research paper is used to generate process plan from feature-based modeling, based on an integrated geometric modeling system that supports both feature-based modeling and information storage. Present system is developed only for milling components and limited to selective machining features for prismatic components and further implemented for more machining features to develop algorithms for modeling the components through the input of machining features. As a result, feature information is directly available to downstream activities, and feature extraction is no longer needed. The various systematic steps involved in this approach are study of Design, identification of Features, selection of Processes, Tools and Machines, Machining and Inspection [DFPTMMI]. Machining features generated in the design stage are recognized and stored under the Visual Basic control of CATIA software ActiveX interface. Algorithms are developed for individual features and these algorithms are embedded in Visual Basic forms. This system is discussed and suited for 2.5 Dimensional part approach, however, that can be extended to 3 dimensional prismatic part and complex features machining. Finally a process planning chart has been presented as a model process planning.展开更多
The synthesis of α-calcium sulfate hemihydrate (α-CSH) from flue gas desulfurization (FGD)gypsum is a good way to realize the comprehensive utilization of FGD gypsum. To obtainα-CSH with the satisfactory performanc...The synthesis of α-calcium sulfate hemihydrate (α-CSH) from flue gas desulfurization (FGD)gypsum is a good way to realize the comprehensive utilization of FGD gypsum. To obtainα-CSH with the satisfactory performances, a facile hydrothermal-aging pretreatment process for FGD gypsum raw materials was proposed, where FGD gypsum was firstly hydrothermally converted to α-CSH whiskers, and α-CSH whiskers were further hydrated to synthesize CaSO4·2H2O (CSD) by aging under the regulation of N,N'-methylenebisacrylamide (MBA). The effects of aging time, MBA addition, aging temperature, and pH on the morphology of the synthesized CSD were investigated. The synthesized CSD crystals exhibit highly uniform prismatic morphology with the length of ca 100μm and the whiteness of 91.56%. The regulation mechanism of MBA was also illustrated. The synthesized CSD crystals with prismatic morphology were further used as raw materials to synthesize the short columnar α-CSH. The absolute dry compressive strength of paste prepared from the short columnar α-CSH is 40.85 MPa, which reaches α40 strength grade.展开更多
Prismatic precipitate platelet is always purposefully designed in the microstructure of magnesium alloys due to its greater contribution to yield stress.In this study,with an introduction of In into Mg-Sm system,a cat...Prismatic precipitate platelet is always purposefully designed in the microstructure of magnesium alloys due to its greater contribution to yield stress.In this study,with an introduction of In into Mg-Sm system,a category of novel{1010}_(α) prismatic platelets has replaced thoroughly the traditionalβ’precipitate formed in magnesium rare earth(Mg-RE)alloys.Herein,the microstructural characteristics of platelet are investigated particularly by atomic scale scanning transmission electron microscopy.It is confirmed that the platelet has a Mg_(2) InSm composition and can maintain a coherent relationship with α-Mg matrix.Importantly,on account of the similarities between In and Mg atoms,the Mg_(2) InSm prismatic platelet could be structurally categorized as a generalizedβ"precipitate with a(Mg_(2) In)Sm-type DO_(19) structure when both In and Mg are regarded as an equivalent atom.Thus,the addition of In into Mg-Sm alloy induces the formation ofβ"precipitate.Furthermore,the formedβ"prismatic platelets generally have a large average aspect ratio.The findings are of great significance to construct the effective precipitation strengthening phases and optimize the microstructure of Mg-based alloys.展开更多
In this paper,we present an effective prismatic mesh generation method for viscous flow simulations.To address the prismatic mesh collisions in recessed cavities or slit areas,we exploit 3D tensors controlled anisotro...In this paper,we present an effective prismatic mesh generation method for viscous flow simulations.To address the prismatic mesh collisions in recessed cavities or slit areas,we exploit 3D tensors controlled anisotropic volume harmonic field to generate prismatic meshes.Specially,a well-fitting tetrahedral mesh is first constructed to serve as the discrete computation domain of volume harmonic fields.Then,3D tensors are exploited to control the volume harmonic field that better fits the shape geometry.From the topological perspective,the generation of the prismatic mesh can be treated as a topology-preserved morphing of the viscous wall.Therefore,iso-surfaces in the volume harmonic field should be homeomorphic to the viscous wall while fitting its shapes.Finally,a full prismatic mesh can be induced by estimating the forward directions and visible regions in the volume harmonic field.Moreover,to be compatible with different simulation situations,the thickness of prismatic meshes should be variable.Our approach provides local adjustable thickness of prismatic meshes,which can be achieved by controlling local 3D tensors.The proposed anisotropic volume harmonic field based prismatic meshes are efficient and robust,and a full prismatic mesh can be guaranteed without low quality collisions.Various experiments have shown that our proposed prismatic meshes have obvious advantages in terms of efficiency and effectiveness.展开更多
The influence of grain size on the tensile deformation and ductility for Mg–1.02%Zn(wt.%)alloy was investigated.The uniform elongation is nearly insensitive to the increase of grain size,but the post-uniform elongati...The influence of grain size on the tensile deformation and ductility for Mg–1.02%Zn(wt.%)alloy was investigated.The uniform elongation is nearly insensitive to the increase of grain size,but the post-uniform elongation is significantly decreased with increasing grain size.The high ductility in the fine-grained samples is due to the lower frequency of twins and increased dynamic recovery from the enhanced activation of prismatic<a>slip.展开更多
Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test v...Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test via quasi in-situ electron backscattered diffraction technique.The results show that twinning firstly takes place under the compressive strain along the RD.With the increasing compressive strain,{1012}tensile twins firstly nucleate,then propagate,and finally thicken.While under a reversed tensile strain along the RD,detwinning occurs.No nucleation happens during detwinning.Thus,tensile twins can detwin at lower tensile strain,followed by thinning,shortening,and vanishing.Slips are also activated to accommodate the plastic deformation.In the matrix,prismatic slip can only dominate at relatively high strains.Otherwise,basal slip dominates.While in the twins,prismatic slip can activate at lower strains,which is ascribed to the texture reorientation.展开更多
Li addition is verified to be an effective method to increase the room temperature ductility and formability of Mg alloys.In the present study,the microstructure,texture,and tensile properties of the extruded Mg-1Zn-x...Li addition is verified to be an effective method to increase the room temperature ductility and formability of Mg alloys.In the present study,the microstructure,texture,and tensile properties of the extruded Mg-1Zn-xLi(wt%,x=0,1,3,5)alloy sheets were studied by X-ray diffraction(XRD),scanning electron microscope(SEM),and electron backscatter diffraction(EBSD).It was found that Li addition resulted in the grain coarsening and the development of new transverse direction(TD)-tilting and{101^(-)0}parallel to extrusion direction textures,which was related to the improved dynamic recrystallization and the increased prismatic slip during extrusion.The Mg-1 Zn-5 Li sheet showed the weakest texture,which contained both basal and TD-tilting oriented grains.No additional phase was formed with Li addition.The yield strength of Mg-1Zn-xLi sheets gradually decreased with increasing Li content,which was mainly related to the grain coarsening and texture weakening.In addition,the ductility of the Mg-1Zn-xLi sheet was remarkably enhanced by Li addition.The elongation of the Mg-1 Zn-5 Li sheet was 30.3%along the TD,which was three times than that of Mg-1 Zn sheet.Microstructural analysis implied that this significant ductility enhancement was associated with the improvement activation of prismatic and basal slips during the tensile tests.This study may provide insights into the development of high-ductility,low-density Mg-Zn-Li based alloys.展开更多
Based on the principles of massive support and lateral support, a novel double-layered split die(DLSD) for high-pressure apparatus was designed to achieve a higher pressure-bearing capacity and larger sample cavity. T...Based on the principles of massive support and lateral support, a novel double-layered split die(DLSD) for high-pressure apparatus was designed to achieve a higher pressure-bearing capacity and larger sample cavity. The stress distributions of the DLSDs with different numbers of divided blocks were investigated by the finite element method and compared with the stress distributions of the conventional belt-type die(BTD). The results show that the cylinders and first-layer supporting rings of the DLSDs have dramatically smaller stresses than those of the BTD. In addition, increasing the number of divided blocks from 4 to 10 gradually increases the stress of the cylinder but has minimal influence on the stress of the supporting rings. The pressure-bearing capacities of the DLSDs with different numbers of divided blocks, especially with fewer blocks, are all remarkably higher than the pressure-bearing capacity of the BTD. The contrast experiments were also carried out to verify the simulated results. It is concluded that the pressure-bearing capacities of the DLSDs with 4 and 8 divided blocks are 1.58 and 1.45 times greater than that of the BTD. This work is rewarding for the commercial synthesis of high-quality, large-sized superhard materials using a double-layered split high-pressure die.展开更多
Most public universities in Latin America and Mexico lack laboratories for measuring sediment transport or to do academic activities. The Research Center of the engineering faculty of Chiapas state university (UNACH b...Most public universities in Latin America and Mexico lack laboratories for measuring sediment transport or to do academic activities. The Research Center of the engineering faculty of Chiapas state university (UNACH by its acronym in Spanish) designed a portable prismatic channel for teaching and researching the sediment transportation in rivers. This paper presents the method to measure river sand transportation in a laboratory channel with a mobile bottom and presents the results of twenty-seven experiments done in the portable channel, using nine different slope inclinations and 27 flow and water speed values. The three main results are the following: 1) The construction of the channel with variable slopes, to experiment and measure sediment transportation. 2) A method developed for measuring the volume of sediment in a laboratory. 3) In a channel with a bottom slope of 0.071, a water flow of 2 l/s and a water speed of 1.77 m/s, the volume of transported sediment was 0.015 m3;in a channel with a bottom slope of 0.44, a water flow of 2 l/s and a water speed of 0.788 m/s, the volume of transported sediment was 0.006 m3;in a channel with the bottom slope of 0.024, a water flow of 2 l/s and a water speed of 0.62 m/s, the transported sediment was 0 m3.展开更多
Statically indeterminate symmetric(SIS)flexure structures are symmetric structures with“clamped-clamped”boundary conditions.The static indeterminacy and topological symmetry significantly attenuate the parasitic mot...Statically indeterminate symmetric(SIS)flexure structures are symmetric structures with“clamped-clamped”boundary conditions.The static indeterminacy and topological symmetry significantly attenuate the parasitic motions associated with statically determinate flexure structures.Hence,SIS flexure structures feature decoupled linear and angular motions,improved motion accuracy,high stiffness,and high stability.Although SIS flexure structures have been more frequently utilized as prismatic joints,they can also be utilized as revolute joints.This study systematically investigates the characteristics of SIS flexure structures.Based on the unified compliance models of a single flexure hinge,analytical compliance models of two fundamental types of SIS flexure structures are established.In 1-degree-of-freedom or planar applications,multiple SIS-based structures can also be integrated into various configurations to transmit linear or angular motions.Corresponding stiffness models are also established.The characteristics and possible applications of the SIS flexure structures are computationally investigated through case studies.Ultimately,several SIS prototypes are manufactured,and the modeling accuracy of the established stiffness models is experimentally verified.展开更多
In this paper the scheme of Ernst et al. has been improved and extended to a doublecomplex form. Two realizations of the Geroch group are obtained on the stationaryaxisymmetric vacuum fields and on the stationary cyli...In this paper the scheme of Ernst et al. has been improved and extended to a doublecomplex form. Two realizations of the Geroch group are obtained on the stationaryaxisymmetric vacuum fields and on the stationary cylindrical vacuum fields. The original result of Ernst et al. only corresponds to the half of one of our results. The rclation between the two realizations is discussed, and some new exact solutions are found by using the realizations.展开更多
Radiation-induced helium bubbles are detrimental to the mechanical properties of metals, usually causing severe hardening and embrittlement. Hexagonal close-packed(HCP) α-Zr alloys are one of the primary structural m...Radiation-induced helium bubbles are detrimental to the mechanical properties of metals, usually causing severe hardening and embrittlement. Hexagonal close-packed(HCP) α-Zr alloys are one of the primary structural materials for nuclear applications, however, the effect of helium bubbles on their deformation and fracture behaviors still remains unexplored. Here, we found that ordered helium bubbles prefer to align along the basal plane in HCP α-Zr. Micro-scale in situ tensile tests revealed that helium bubbles less than 8 nm in size can increase the critical resolved shear stress of the prismatic slip. However, once the helium bubbles are larger than 8 nm, a bubble-softening effect happens due to a decrease in number density of helium bubbles and an increase in porosity. Once the Schmid factor of basal slip is considerably higher than prismatic slip, bubble coalescence along the basal plane becomes the major failure mode in helium-irradiated α-Zr.展开更多
With the increasing demand for clean renewable energy and electric cars,people have put forward higher requirement for the energy storage system.One of the most successful lithium-ion batteries with a cathode combinat...With the increasing demand for clean renewable energy and electric cars,people have put forward higher requirement for the energy storage system.One of the most successful lithium-ion batteries with a cathode combination of lithium nickel manganese cobalt oxide(also called NCM lithium-ion battery),has been playing an increasingly important role.So far,numerous research has been done on the fabrication of cathode material with optimization of its composition,design,and assembly of the battery system in order to improve the energy storage performance.However,most of the previous studies were conducted based on relatively short cycling time of testing,with limited charge-discharge cycles of no more than 1000.Thus the conclusions were insufficient to be applied in the practical working condition.In this work,by using the developed NCM523 lithium-ion batteries,we have performed a series of ultra-long cycling tests on the individual cell and its module,with a comprehensive study on the relationship between the retained capacity after long cycling time and the depth of discharge(DOD),charge-discharge rate and operating temperature.Optimization of the charge-discharge strategies on a single cell and the whole module was also made to effectively improve the overall energy storage efficiency.This experimental study offers a guideline for the efficient use of similar types of lithium-ion batteries in the practical working condition.The developed batteries together with the optimized charge-discharge strategy proposed here are promising to meet the requirements for applications of stationary energy storage and electric cars.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11822203and 11702026)。
文摘Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control.The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings.In this study,numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted.A new numerical method,which adds the Lagrangian marker points to the Eulerian grid,was proposed to track the multi-material interfaces and material dynamic fractures.Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship.Thereafter,the fragment spatial distributions of the prismatic casing with different fragment sizes,fragment shapes,and casing geometries were obtained using the numerical method.Moreover,fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes,and the experimental data were compared with the numerical results.The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data.Finally,a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.
文摘This paper describes a dynamic simulation system for manufacturing prismatic components on machining centers named NCDSS. It is a subsystem of CAD/CAPP/NC integrated system for prismatic parts that we are working on. Based on the system of CAD and CAPP, it can automati. cally generate NC program used on machining centers and can simulate the machining process in the sequence of technology. Techniques of automatically producing NC program for prismaic parts and the method of dynamic simulation are also discussed.
文摘The fracture toughness and fracture work of A12O3/SiC prismatic ceramic composites was evaluated in this paper, which showed the fracture energy was improved greatly. Based on the observation ’for crack propagation and fracture morphology, the fracture behavior of the prismatic composites was analyzed. In the bending test, the composites displayed a non-catastrophic behavior and a graceful failure with reasonable load-carrying capability.
文摘The field of solid modeling has created numerous techniques for unambiguous computer representations of three-dimensional objects. Its data structures and algorithms have been used in a broad range of applications: Computer-Aided Design and Computer-Aided Manufacturing (CAD/ CAM), robotics, computer vision, computer graphics and visualization, virtual reality, etc. This research paper is used to generate process plan from feature-based modeling, based on an integrated geometric modeling system that supports both feature-based modeling and information storage. Present system is developed only for milling components and limited to selective machining features for prismatic components and further implemented for more machining features to develop algorithms for modeling the components through the input of machining features. As a result, feature information is directly available to downstream activities, and feature extraction is no longer needed. The various systematic steps involved in this approach are study of Design, identification of Features, selection of Processes, Tools and Machines, Machining and Inspection [DFPTMMI]. Machining features generated in the design stage are recognized and stored under the Visual Basic control of CATIA software ActiveX interface. Algorithms are developed for individual features and these algorithms are embedded in Visual Basic forms. This system is discussed and suited for 2.5 Dimensional part approach, however, that can be extended to 3 dimensional prismatic part and complex features machining. Finally a process planning chart has been presented as a model process planning.
基金Funded by National Natural Science Foundation of China(No.22008049)Natural Science Foundation of Hebei Province,China (Nos.B2020202081 and B2018202330)+1 种基金Key Laboratory of Gas Hydrate,Guangzhou Institute of Energy Conversion,Chinese Academy of Sciences,China (No.E029kf1601)Research Fund Program of Science and Technology of Colleges and Universities of Hebei Province,China (No.QN2019012)。
文摘The synthesis of α-calcium sulfate hemihydrate (α-CSH) from flue gas desulfurization (FGD)gypsum is a good way to realize the comprehensive utilization of FGD gypsum. To obtainα-CSH with the satisfactory performances, a facile hydrothermal-aging pretreatment process for FGD gypsum raw materials was proposed, where FGD gypsum was firstly hydrothermally converted to α-CSH whiskers, and α-CSH whiskers were further hydrated to synthesize CaSO4·2H2O (CSD) by aging under the regulation of N,N'-methylenebisacrylamide (MBA). The effects of aging time, MBA addition, aging temperature, and pH on the morphology of the synthesized CSD were investigated. The synthesized CSD crystals exhibit highly uniform prismatic morphology with the length of ca 100μm and the whiteness of 91.56%. The regulation mechanism of MBA was also illustrated. The synthesized CSD crystals with prismatic morphology were further used as raw materials to synthesize the short columnar α-CSH. The absolute dry compressive strength of paste prepared from the short columnar α-CSH is 40.85 MPa, which reaches α40 strength grade.
基金financially supported by the Liaoning Provincial Natural Science Foundation of China(No.2020-MS-085)。
文摘Prismatic precipitate platelet is always purposefully designed in the microstructure of magnesium alloys due to its greater contribution to yield stress.In this study,with an introduction of In into Mg-Sm system,a category of novel{1010}_(α) prismatic platelets has replaced thoroughly the traditionalβ’precipitate formed in magnesium rare earth(Mg-RE)alloys.Herein,the microstructural characteristics of platelet are investigated particularly by atomic scale scanning transmission electron microscopy.It is confirmed that the platelet has a Mg_(2) InSm composition and can maintain a coherent relationship with α-Mg matrix.Importantly,on account of the similarities between In and Mg atoms,the Mg_(2) InSm prismatic platelet could be structurally categorized as a generalizedβ"precipitate with a(Mg_(2) In)Sm-type DO_(19) structure when both In and Mg are regarded as an equivalent atom.Thus,the addition of In into Mg-Sm alloy induces the formation ofβ"precipitate.Furthermore,the formedβ"prismatic platelets generally have a large average aspect ratio.The findings are of great significance to construct the effective precipitation strengthening phases and optimize the microstructure of Mg-based alloys.
基金National Numerical Wind Tunnel Project of China,National Natural Science Foundation of China grants(61772104,61720106005)Fundamental Research Funds for the Central Universities(DUT20JC32,DUT20TD107).
文摘In this paper,we present an effective prismatic mesh generation method for viscous flow simulations.To address the prismatic mesh collisions in recessed cavities or slit areas,we exploit 3D tensors controlled anisotropic volume harmonic field to generate prismatic meshes.Specially,a well-fitting tetrahedral mesh is first constructed to serve as the discrete computation domain of volume harmonic fields.Then,3D tensors are exploited to control the volume harmonic field that better fits the shape geometry.From the topological perspective,the generation of the prismatic mesh can be treated as a topology-preserved morphing of the viscous wall.Therefore,iso-surfaces in the volume harmonic field should be homeomorphic to the viscous wall while fitting its shapes.Finally,a full prismatic mesh can be induced by estimating the forward directions and visible regions in the volume harmonic field.Moreover,to be compatible with different simulation situations,the thickness of prismatic meshes should be variable.Our approach provides local adjustable thickness of prismatic meshes,which can be achieved by controlling local 3D tensors.The proposed anisotropic volume harmonic field based prismatic meshes are efficient and robust,and a full prismatic mesh can be guaranteed without low quality collisions.Various experiments have shown that our proposed prismatic meshes have obvious advantages in terms of efficiency and effectiveness.
基金This work was funded by the National Natural Science Foundation of China(No.51105350)China 973 Program(2013CB632202).
文摘The influence of grain size on the tensile deformation and ductility for Mg–1.02%Zn(wt.%)alloy was investigated.The uniform elongation is nearly insensitive to the increase of grain size,but the post-uniform elongation is significantly decreased with increasing grain size.The high ductility in the fine-grained samples is due to the lower frequency of twins and increased dynamic recovery from the enhanced activation of prismatic<a>slip.
基金support from the US Department of Energy,Office of Basic Energy Science under Award no.DE-SC0016333.
文摘Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test via quasi in-situ electron backscattered diffraction technique.The results show that twinning firstly takes place under the compressive strain along the RD.With the increasing compressive strain,{1012}tensile twins firstly nucleate,then propagate,and finally thicken.While under a reversed tensile strain along the RD,detwinning occurs.No nucleation happens during detwinning.Thus,tensile twins can detwin at lower tensile strain,followed by thinning,shortening,and vanishing.Slips are also activated to accommodate the plastic deformation.In the matrix,prismatic slip can only dominate at relatively high strains.Otherwise,basal slip dominates.While in the twins,prismatic slip can activate at lower strains,which is ascribed to the texture reorientation.
基金financially supported by the National Natural Science Foundation of China (Nos. U1764253, U2037601, U1910213, 51971044, and 52001037)the Qinghai Science and Technology Program, China (No. 2018GX-A1)
文摘Li addition is verified to be an effective method to increase the room temperature ductility and formability of Mg alloys.In the present study,the microstructure,texture,and tensile properties of the extruded Mg-1Zn-xLi(wt%,x=0,1,3,5)alloy sheets were studied by X-ray diffraction(XRD),scanning electron microscope(SEM),and electron backscatter diffraction(EBSD).It was found that Li addition resulted in the grain coarsening and the development of new transverse direction(TD)-tilting and{101^(-)0}parallel to extrusion direction textures,which was related to the improved dynamic recrystallization and the increased prismatic slip during extrusion.The Mg-1 Zn-5 Li sheet showed the weakest texture,which contained both basal and TD-tilting oriented grains.No additional phase was formed with Li addition.The yield strength of Mg-1Zn-xLi sheets gradually decreased with increasing Li content,which was mainly related to the grain coarsening and texture weakening.In addition,the ductility of the Mg-1Zn-xLi sheet was remarkably enhanced by Li addition.The elongation of the Mg-1 Zn-5 Li sheet was 30.3%along the TD,which was three times than that of Mg-1 Zn sheet.Microstructural analysis implied that this significant ductility enhancement was associated with the improvement activation of prismatic and basal slips during the tensile tests.This study may provide insights into the development of high-ductility,low-density Mg-Zn-Li based alloys.
基金Changchun Ruiguang Science & Technology Co., Ltd. for technical assistance and financial support
文摘Based on the principles of massive support and lateral support, a novel double-layered split die(DLSD) for high-pressure apparatus was designed to achieve a higher pressure-bearing capacity and larger sample cavity. The stress distributions of the DLSDs with different numbers of divided blocks were investigated by the finite element method and compared with the stress distributions of the conventional belt-type die(BTD). The results show that the cylinders and first-layer supporting rings of the DLSDs have dramatically smaller stresses than those of the BTD. In addition, increasing the number of divided blocks from 4 to 10 gradually increases the stress of the cylinder but has minimal influence on the stress of the supporting rings. The pressure-bearing capacities of the DLSDs with different numbers of divided blocks, especially with fewer blocks, are all remarkably higher than the pressure-bearing capacity of the BTD. The contrast experiments were also carried out to verify the simulated results. It is concluded that the pressure-bearing capacities of the DLSDs with 4 and 8 divided blocks are 1.58 and 1.45 times greater than that of the BTD. This work is rewarding for the commercial synthesis of high-quality, large-sized superhard materials using a double-layered split high-pressure die.
文摘Most public universities in Latin America and Mexico lack laboratories for measuring sediment transport or to do academic activities. The Research Center of the engineering faculty of Chiapas state university (UNACH by its acronym in Spanish) designed a portable prismatic channel for teaching and researching the sediment transportation in rivers. This paper presents the method to measure river sand transportation in a laboratory channel with a mobile bottom and presents the results of twenty-seven experiments done in the portable channel, using nine different slope inclinations and 27 flow and water speed values. The three main results are the following: 1) The construction of the channel with variable slopes, to experiment and measure sediment transportation. 2) A method developed for measuring the volume of sediment in a laboratory. 3) In a channel with a bottom slope of 0.071, a water flow of 2 l/s and a water speed of 1.77 m/s, the volume of transported sediment was 0.015 m3;in a channel with a bottom slope of 0.44, a water flow of 2 l/s and a water speed of 0.788 m/s, the volume of transported sediment was 0.006 m3;in a channel with the bottom slope of 0.024, a water flow of 2 l/s and a water speed of 0.62 m/s, the transported sediment was 0 m3.
基金funded by the National Natural Science Foundation of China under Grants 61873133,and 52005270in part by the Natural Science Foundation of Tianjin under Grant 21JCZDJC00090.
文摘Statically indeterminate symmetric(SIS)flexure structures are symmetric structures with“clamped-clamped”boundary conditions.The static indeterminacy and topological symmetry significantly attenuate the parasitic motions associated with statically determinate flexure structures.Hence,SIS flexure structures feature decoupled linear and angular motions,improved motion accuracy,high stiffness,and high stability.Although SIS flexure structures have been more frequently utilized as prismatic joints,they can also be utilized as revolute joints.This study systematically investigates the characteristics of SIS flexure structures.Based on the unified compliance models of a single flexure hinge,analytical compliance models of two fundamental types of SIS flexure structures are established.In 1-degree-of-freedom or planar applications,multiple SIS-based structures can also be integrated into various configurations to transmit linear or angular motions.Corresponding stiffness models are also established.The characteristics and possible applications of the SIS flexure structures are computationally investigated through case studies.Ultimately,several SIS prototypes are manufactured,and the modeling accuracy of the established stiffness models is experimentally verified.
文摘In this paper the scheme of Ernst et al. has been improved and extended to a doublecomplex form. Two realizations of the Geroch group are obtained on the stationaryaxisymmetric vacuum fields and on the stationary cylindrical vacuum fields. The original result of Ernst et al. only corresponds to the half of one of our results. The rclation between the two realizations is discussed, and some new exact solutions are found by using the realizations.
基金supported financially by the National Key Research and Development Program of China (No. 2017YFB0702301)the National Natural Science Foundation of China (Nos. 51471128 and 51621063)+1 种基金the Innovation Project of Shannxi Province (No. 2017KTPT-12)111 Project of China (No. BP2018008)
文摘Radiation-induced helium bubbles are detrimental to the mechanical properties of metals, usually causing severe hardening and embrittlement. Hexagonal close-packed(HCP) α-Zr alloys are one of the primary structural materials for nuclear applications, however, the effect of helium bubbles on their deformation and fracture behaviors still remains unexplored. Here, we found that ordered helium bubbles prefer to align along the basal plane in HCP α-Zr. Micro-scale in situ tensile tests revealed that helium bubbles less than 8 nm in size can increase the critical resolved shear stress of the prismatic slip. However, once the helium bubbles are larger than 8 nm, a bubble-softening effect happens due to a decrease in number density of helium bubbles and an increase in porosity. Once the Schmid factor of basal slip is considerably higher than prismatic slip, bubble coalescence along the basal plane becomes the major failure mode in helium-irradiated α-Zr.
基金This work was financially supported by the National K ey Basic Research Program of China(2014CB249200).
文摘With the increasing demand for clean renewable energy and electric cars,people have put forward higher requirement for the energy storage system.One of the most successful lithium-ion batteries with a cathode combination of lithium nickel manganese cobalt oxide(also called NCM lithium-ion battery),has been playing an increasingly important role.So far,numerous research has been done on the fabrication of cathode material with optimization of its composition,design,and assembly of the battery system in order to improve the energy storage performance.However,most of the previous studies were conducted based on relatively short cycling time of testing,with limited charge-discharge cycles of no more than 1000.Thus the conclusions were insufficient to be applied in the practical working condition.In this work,by using the developed NCM523 lithium-ion batteries,we have performed a series of ultra-long cycling tests on the individual cell and its module,with a comprehensive study on the relationship between the retained capacity after long cycling time and the depth of discharge(DOD),charge-discharge rate and operating temperature.Optimization of the charge-discharge strategies on a single cell and the whole module was also made to effectively improve the overall energy storage efficiency.This experimental study offers a guideline for the efficient use of similar types of lithium-ion batteries in the practical working condition.The developed batteries together with the optimized charge-discharge strategy proposed here are promising to meet the requirements for applications of stationary energy storage and electric cars.
