In order to obtain Mg alloys with fine microstructures and high mechanical performances,a novel friction-based processing method,name as“constrained friction processing(CFP)”,was investigated.Via CFP,defect-free Mg-...In order to obtain Mg alloys with fine microstructures and high mechanical performances,a novel friction-based processing method,name as“constrained friction processing(CFP)”,was investigated.Via CFP,defect-free Mg-Zn-Ca rods with greatly refined grains and high mechanical properties were produced.Compared to the previous as-cast microstructure,the grain size was reduced from more than 1 mm to around 4μm within 3 s by a single process cycle.The compressive yield strength was increased by 350%while the ultimate compressive strength by 53%.According to the established material flow behaviors by“tracer material”,the plastic material was transported by shear deformation.From the base material to the rod,the material experienced three stages,i.e.deformation by the tool,upward flow with additional tilt,followed by upward transportation.The microstructural evolution was revealed by“stop-action”technique.The microstructural development at regions adjacent to the rod is mainly controlled by twinning,dynamic recrystallization(DRX)as well as particle stimulated nucleation,while that within the rod is related to DRX combined with grain growth.展开更多
To address the problem of real-time processing of ultra-wide bandwidth pulsar baseband data,we designed and implemented a pulsar baseband data processing algorithm(PSRDP)based on GPU parallel computing technology.PSRD...To address the problem of real-time processing of ultra-wide bandwidth pulsar baseband data,we designed and implemented a pulsar baseband data processing algorithm(PSRDP)based on GPU parallel computing technology.PSRDP can perform operations such as baseband data unpacking,channel separation,coherent dedispersion,Stokes detection,phase and folding period prediction,and folding integration in GPU clusters.We tested the algorithm using the J0437-4715 pulsar baseband data generated by the CASPSR and Medusa backends of the Parkes,and the J0332+5434 pulsar baseband data generated by the self-developed backend of the Nan Shan Radio Telescope.We obtained the pulse profiles of each baseband data.Through experimental analysis,we have found that the pulse profiles generated by the PSRDP algorithm in this paper are essentially consistent with the processing results of Digital Signal Processing Software for Pulsar Astronomy(DSPSR),which verified the effectiveness of the PSRDP algorithm.Furthermore,using the same baseband data,we compared the processing speed of PSRDP with DSPSR,and the results showed that PSRDP was not slower than DSPSR in terms of speed.The theoretical and technical experience gained from the PSRDP algorithm research in this article lays a technical foundation for the real-time processing of QTT(Qi Tai radio Telescope)ultra-wide bandwidth pulsar baseband data.展开更多
The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.The...The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.Therefore,in this study,the effects of three different processing methods,i.e.,microwave,ultrasound,and high temperature-pressure(HTP)treatments,on the digestion stability of TM from Chinese mitten crab muscle and the allergenicity of TM digestion products were explored.sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that microwaving had little effect on the digestion stability of TM.In contrast,ultrasound and HTP treatments facilitated the degradation of TM.Similarly,Western blotting and inhibition ELISA indicated that the IgE-binding activity of TM was significantly reduced after treatment with ultrasound or HTP.Among the three different proces sing methods,HTP was the most effective method for improving digestibility of TM and reducing immunoreactivity.This finding provides new insights into treatments for crab allergies.展开更多
Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily h...Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily hydrolyzed to release cyanide salt compounds which is toxic to the nervous system especially the optic nerve, sometimes leading to optic neuropathy and visual impairment. Aim: The aim of this study is to find out the impact of selected processing methods of high-level cyanide in cassava on optic neuropathy in Wistar albino rats. Methodology: Twenty-four Wistar albino rats were fed with different concentration and duration of predetermined high-cyanide content cassava root cultivar which was processed using different processing methods adopted by various communities in Rivers State, Nigeria (for human consumption). A control group of 3 Wistar albino rats was fed with normal “Growth Mesh” meals. The pre and post weights of the animals and the fundoscopic optic nerve status of the rats were evaluated after 30 and 60 days. SPSS Version 25 was employed for descriptive and inferential statistical analyses. A p-value of ≤0.05 was considered statistically significant. Results: The Cassava species available in Rivers State have high cyanide content (2336.79 mg CN<sup>-</sup>/kg dry weight of cassava). There was statistically significant reduction in the cyanide content (p = 0.000) depending on the various common processing methods (into garri for human consumption): 24 hours, 48 hours, fermentation;with and without red palm oil additive. The individual weights as well as the mean weight of the 24 rats in the experimental group increased gradually from the first week to the 9<sup>th</sup> week with a slight weight reduction on the third and fourth weeks which was not statistically significant (p = 0.092). However, there was a steady increase in the weights of the animals in the control group throughout the 9 weeks. Varying degrees of optic neuropathy occurred, worse with the rats that had 24-hour fermented cassava twice daily for 60 days. The intra and inter group differences in the optic disc changes was statistically significant (p = 0.000). Conclusion: Longer duration of processing cassava roots into garri for human consumption reduces its cyanide content and minimizes the adverse impact on the optic nerve.展开更多
[Objectives]The paper was to compare the effects of different initial processing methods on atractylodin content of Atractylodes chinensis.[Methods]The atractylodin content of A.chinensis obtained by different initial...[Objectives]The paper was to compare the effects of different initial processing methods on atractylodin content of Atractylodes chinensis.[Methods]The atractylodin content of A.chinensis obtained by different initial processing methods was determined by HPLC.The loss rate on drying was determined by weighing.[Results]In the study of drying methods,the atractylodin content varied significantly among different thicknesses of slices,and the overall content of the product with the slice thickness of 5 mm was higher.Among different drying methods,constant temperature vacuum drying and shade drying of 5 mm slice resulted in the highest content of atractylodin.In the experiment of root impacting,root impacting twice received the best effect,and there was no significant difference in the atractylosin content of A.chinensis between drying in the sun and drying in the shade after root impacting twice(P>0.05).[Conclusions]Constant temperature vacuum drying or drying in the shade with the slice thickness of 5 mm,and root impacting twice is the best initial processing method,which leads to high atractylodin content of A.chinensis and good quality of medicinal materials.展开更多
Qingke(highland hull-less barley)is a grain replete with substantial nutrients and bioactive ingredients.In this study,we evaluated the effects of boiling(BO),steaming(ST),microwave baking(MB),far-infrared baking(FB),...Qingke(highland hull-less barley)is a grain replete with substantial nutrients and bioactive ingredients.In this study,we evaluated the effects of boiling(BO),steaming(ST),microwave baking(MB),far-infrared baking(FB),steam explosion(SE),and deep frying(DF)on bioactive components,phenolic compounds,and antioxidant activities of Qingke compared with the effects of traditional roast(TR).Results showed that the soluble dietary fiber,beta-glucan and water-extractable pentosans of Qingke in dry heat processes of TR,SE,MB and FB had a higher content compared with other thermal methods and had a better antioxidant activity of hydroxyl radical scavenging and a better reduction capacity,while those in wet heat processes of BO and ST had a better antioxidant activity of ABTS radical scavenging and a better Fe^(2+) chelating ability.DF-and SE-Qingke had a higher content of tocopherol,phenolic,and flavonoid.Overall,6 free phenolic compounds and 12 bound phenolic compounds of Qingke were identified,and free phenolic compounds suffered more damage during thermal processing.Principal component analysis showed that SE had more advantages in retaining and improving the main biological active ingredients of Qingke,and it may be the best method for treating Qingke.展开更多
Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).Howe...Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).However,the sparse and disordered nature of the 3D point cloud poses significant challenges to feature extraction.Overcoming limitations is critical for 3D point cloud processing.3D point cloud object detection is a very challenging and crucial task,in which point cloud processing and feature extraction methods play a crucial role and have a significant impact on subsequent object detection performance.In this overview of outstanding work in object detection from the 3D point cloud,we specifically focus on summarizing methods employed in 3D point cloud processing.We introduce the way point clouds are processed in classical 3D object detection algorithms,and their improvements to solve the problems existing in point cloud processing.Different voxelization methods and point cloud sampling strategies will influence the extracted features,thereby impacting the final detection performance.展开更多
Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processi...Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processing methods.Here,we conducted a lipidomics analysis using UPLC-QTOF-MS to characterize the lipid composition of cold-pressed hazelnut oil(CPO),ultrasonic-assisted hexane hazelnut oil(UHO)and enzyme-assisted aqueous hazelnut oil(EAO).A total of 10 subclasses of 98 lipids were identified,including35 glycerolipids(GLs),56 glycerophospholipids(GPs)and 7 sphingolipids(SPs).The total lipid and GL content were the highest in CPO,GP content was the highest in UHO and the ceramide content in SPs was most abundant in EAO.Multivariate statistical analysis showed that the lipid profiles of hazelnut oil prepared with different processing methods varied.Twelve significantly different lipids(TAG 54:3,TAG 52:2,TAG54:4,TAG 54:2,TAG 52:3,TAG 54:5,DAG 36:2,DAG 36:4,DAG 36:3,PC 36:2,PA 36:2 and PE 36:3)were identified,and these lipids could potentially be used as biomarkers to distinguish between hazelnut oil subjected to different processing methods.Our results provide useful information for hazelnut oil applications and new insight into the effects of edible oil processing.展开更多
We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing f...We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.展开更多
Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical com...Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical composition in jujube processed products,and impact of processing on chemical composition of jujube are reviewed,which could provide basic data for fully studying,developing and utilizing jujube by scholars and technical staff.展开更多
Due to the frequent changes of wind speed and wind direction,the accuracy of wind turbine(WT)power prediction using traditional data preprocessing method is low.This paper proposes a data preprocessing method which co...Due to the frequent changes of wind speed and wind direction,the accuracy of wind turbine(WT)power prediction using traditional data preprocessing method is low.This paper proposes a data preprocessing method which combines POT with DBSCAN(POT-DBSCAN)to improve the prediction efficiency of wind power prediction model.Firstly,according to the data of WT in the normal operation condition,the power prediction model ofWT is established based on the Particle Swarm Optimization(PSO)Arithmetic which is combined with the BP Neural Network(PSO-BP).Secondly,the wind-power data obtained from the supervisory control and data acquisition(SCADA)system is preprocessed by the POT-DBSCAN method.Then,the power prediction of the preprocessed data is carried out by PSO-BP model.Finally,the necessity of preprocessing is verified by the indexes.This case analysis shows that the prediction result of POT-DBSCAN preprocessing is better than that of the Quartile method.Therefore,the accuracy of data and prediction model can be improved by using this method.展开更多
AIM:To develop a fuzzy classification method to score the texture features of pancreatic cancer in endoscopic ultrasonography(EUS)images and evaluate its utility in making prognosis judgments for patients with unresec...AIM:To develop a fuzzy classification method to score the texture features of pancreatic cancer in endoscopic ultrasonography(EUS)images and evaluate its utility in making prognosis judgments for patients with unresectable pancreatic cancer treated by EUS-guided interstitial brachytherapy.METHODS:EUS images from our retrospective database were analyzed.The regions of interest were drawn,and texture features were extracted,selected,and scored with a fuzzy classification method using a C++program.Then,patients with unresectable pancreatic cancer were enrolled to receive EUS-guided iodine 125 radioactive seed implantation.Their fuzzy classification scores,tumor volumes,and carbohydrate antigen 199(CA199)levels before and after the brachytherapy were recorded.The association between the changes in these parameters and overall survival was analyzed statistically.RESULTS:EUS images of 153 patients with pancreatic cancer and 63 non-cancer patients were analyzed.A total of 25 consecutive patients were enrolled,and they tolerated the brachytherapy well without any complications.There was a correlation between the change in the fuzzy classification score and overall survival(Spearman test,r=0.616,P=0.001),whereas no correlation was found to be significant between the change in tumor volume(P=0.663),CA199 level(P=0.659),and overall survival.There were 15 patients with a decrease in their fuzzy classification score after brachytherapy,whereas the fuzzy classification score increased in another 10 patients.There was a significant difference in overall survival between the two groups(67 d vs 151 d,P=0.001),but not in the change of tumor volume and CA199 level.CONCLUSION:Using the fuzzy classification method to analyze EUS images of pancreatic cancer is feasible,and the method can be used to make prognosis judgments for patients with unresectable pancreatic cancer treated by interstitial brachytherapy.展开更多
The mechanical properties of metal yttrium such as strength, plasticity, hardness and elasticity were introduced. The purifying techniques of yttrium were discussed in detail. The processing methods for metal yttrium ...The mechanical properties of metal yttrium such as strength, plasticity, hardness and elasticity were introduced. The purifying techniques of yttrium were discussed in detail. The processing methods for metal yttrium including extruding, forging, rolling, wiredrawing and welding were also introduced. Finally, the potential use of yttrium and its alloys were prospected.展开更多
The grain production prediction is one of the most important links in precision agriculture. In the process of grain production prediction, mechanical noise caused by the factors of difference in field topography and ...The grain production prediction is one of the most important links in precision agriculture. In the process of grain production prediction, mechanical noise caused by the factors of difference in field topography and mechanical vibration will be mixed in the original signal, which undoubtedly will affect the prediction accuracy. Therefore, in order to reduce the influence of vibration noise on the prediction accuracy, an adaptive Ensemble Empirical Mode Decomposition(EEMD) threshold filtering algorithm was applied to the original signal in this paper: the output signal was decomposed into a finite number of Intrinsic Mode Functions(IMF) from high frequency to low frequency by using the Empirical Mode Decomposition(EMD) algorithm which could effectively restrain the mode mixing phenomenon; then the demarcation point of high and low frequency IMF components were determined by Continuous Mean Square Error criterion(CMSE), the high frequency IMF components were denoised by wavelet threshold algorithm, and finally the signal was reconstructed. The algorithm was an improved algorithm based on the commonly used wavelet threshold. The two algorithms were used to denoise the original production signal respectively, the adaptive EEMD threshold filtering algorithm had significant advantages in three denoising performance indexes of signal denoising ratio, root mean square error and smoothness. The five field verification tests showed that the average error of field experiment was 1.994% and the maximum relative error was less than 3%. According to the test results, the relative error of the predicted yield per hectare was 2.97%, which was relative to the actual yield. The test results showed that the algorithm could effectively resist noise and improve the accuracy of prediction.展开更多
The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark ...The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark State Magnetometer)probes. This article introduces the main processing method, algorithm, and processing procedure of the HPM data. First, the FGM and CDSM probes are calibrated according to ground sensor data. Then the FGM linear parameters can be corrected in orbit, by applying the absolute vector magnetic field correction algorithm from CDSM data. At the same time, the magnetic interference of the satellite is eliminated according to ground-satellite magnetic test results. Finally, according to the characteristics of the magnetic field direction in the low latitude region, the transformation matrix between FGM probe and star sensor is calibrated in orbit to determine the correct direction of the magnetic field. Comparing the magnetic field data of CSES and SWARM satellites in five continuous geomagnetic quiet days, the difference in measurements of the vector magnetic field is about 10 nT, which is within the uncertainty interval of geomagnetic disturbance.展开更多
Underwater target recognition is a key technology for underwater acoustic countermeasure.How to classify and recognize underwater targets according to the noise information of underwater targets has been a hot topic i...Underwater target recognition is a key technology for underwater acoustic countermeasure.How to classify and recognize underwater targets according to the noise information of underwater targets has been a hot topic in the field of underwater acoustic signals.In this paper,the deep learning model is applied to underwater target recognition.Improved anti-noise Power-Normalized Cepstral Coefficients(ia-PNCC)is proposed,based on PNCC applied to underwater noises.Multitaper and normalized Gammatone filter banks are applied to improve the anti-noise capacity.The method is combined with a convolutional neural network in order to recognize the underwater target.Experiment results show that the acoustic feature presented by ia-PNCC has lower noise and are wellsuited to underwater target recognition using a convolutional neural network.Compared with the combination of convolutional neural network with single acoustic feature,such as MFCC(Mel-scale Frequency Cepstral Coefficients)or LPCC(Linear Prediction Cepstral Coefficients),the combination of the ia-PNCC with a convolutional neural network offers better accuracy for underwater target recognition.展开更多
Objective:A novel processing analytical framework of Chinese Material Medica (CMM) includes breeding process analysis,planting process analysis,producing process analysis and manufacture process analysis.In order to s...Objective:A novel processing analytical framework of Chinese Material Medica (CMM) includes breeding process analysis,planting process analysis,producing process analysis and manufacture process analysis.In order to study this framework,we used quality control of honeysuckle flower (Lonicerae japonicae Flos) including diploid and tetraploid Lonicera japonica,and wild honeysuckle flower (Lonicerae Flos) including Lonicerae hypoglauca,Lonicerae confusa,Lonicerae fulvotomentosa and Lonicerae macranthoides as an example.Methods:A total of 360 samples were analyzed from three variables including species,growing areas,and optimization of processing methods.For quantitative analysis,chlorogenic acid (CA),isochlorogenic acid A (3,5-DCA),and isochlorogenic acid C (4,5-DCA) were measured with high performance liquid chromatography (HPLC).Results:The three organic acids contents are higher in wild honeysuckle flower than honeysuckle flower;L.japonica (tetraploid) is higher than L.japonica (diploid).Modern processing methods (kill-enzyme torrefaction and fixing machine drying) are popular in growing areas and are superior to traditional methods (sun and shade drying).Conclusions:Novel process analysis concepts in processing analytical technology (PAT) enriched the Chinese MateHal Medica contents.展开更多
The conventional methods of edge detection can roughly delineate edge position of geological bodies,but there are still some problems such as low detection accuracy and being susceptible to noise interference.In this ...The conventional methods of edge detection can roughly delineate edge position of geological bodies,but there are still some problems such as low detection accuracy and being susceptible to noise interference.In this paper,three image processing methods,Canny,Lo G and Sobel operators are briefly introduced,and applied to edge detection to determine the edge of geological bodies.Furthermore,model data is built to analyze the edge detection ability of this image processing methods,and compare with conventional methods.Combined with gravity anomaly of Sichuan basin and magnetic anomaly of Zhurihe area,the detection effect of image processing methods is further verified in real data.The results show that image processing methods can be applied to effectively identify the edge of geological bodies.Moreover,when both positive and negative anomalies exist and noise is abundant,fake edge can be avoided and edge division is clearer,and satisfactory results of edge detection are obtained.展开更多
A novel method,referred to as joint multiple subpulses processing,is developed to calibrate the nonideal transfer function of radio frequency front-end and I/Q imbalance in quadrature modulate/demodulate systems simul...A novel method,referred to as joint multiple subpulses processing,is developed to calibrate the nonideal transfer function of radio frequency front-end and I/Q imbalance in quadrature modulate/demodulate systems simultaneously,which frequently occur in wideband Synthetic Aperture Radar(SAR) systems.Based on the time-frequency relation of the chirp signal and the analyses of the channel errors in wideband SAR,joint multiple subpulses processing method is adopted to separate the image frequency component due to the I/Q channel error.Then,the complete description of the channel error is acquired for building the correction function,which is used to correct the radar raw echo in frequency domain.The validity and capability of this method are demonstrated by the experiments of the channel error correction on the high resolution SAR system with the effective bandwidth of 500 MHz.展开更多
In this paper, I described the methods that I used for the creation of Xlets, which are Java applets that are developed for the IDTV environment;and the methods for online data retrieval and processing that I utilized...In this paper, I described the methods that I used for the creation of Xlets, which are Java applets that are developed for the IDTV environment;and the methods for online data retrieval and processing that I utilized in these Xlets. The themes that I chose for the Xlets of the IDTV applications are Earthquake and Tsunami Early Warning;Recent Seismic Activity Report;and Emergency Services. The online data regarding the Recent Seismic Activity Report application are provided by the Kandilli Observatory and Earthquake Research Institute (KOERI) of Bogazici University in Istanbul;while the online data for the Earthquake and Tsunami Early Warning and the Emergency Services applications are provided by the Godoro website which I used for storing (and retrieving by the Xlets) the earthquake and tsunami early warning simulation data, and the DVB network subscriber data (such as name and address information) for utilizing in the Emergency Services (Police, Ambulance and Fire Department) application. I have focused on the methodologies to use digital television as an efficient medium to convey timely and useful information regarding seismic warning data to the public, which forms the main research topic of this paper.展开更多
基金the China Scholarship Council for the award of fellowship and funding(No.202006230137)。
文摘In order to obtain Mg alloys with fine microstructures and high mechanical performances,a novel friction-based processing method,name as“constrained friction processing(CFP)”,was investigated.Via CFP,defect-free Mg-Zn-Ca rods with greatly refined grains and high mechanical properties were produced.Compared to the previous as-cast microstructure,the grain size was reduced from more than 1 mm to around 4μm within 3 s by a single process cycle.The compressive yield strength was increased by 350%while the ultimate compressive strength by 53%.According to the established material flow behaviors by“tracer material”,the plastic material was transported by shear deformation.From the base material to the rod,the material experienced three stages,i.e.deformation by the tool,upward flow with additional tilt,followed by upward transportation.The microstructural evolution was revealed by“stop-action”technique.The microstructural development at regions adjacent to the rod is mainly controlled by twinning,dynamic recrystallization(DRX)as well as particle stimulated nucleation,while that within the rod is related to DRX combined with grain growth.
基金supported by the National Key R&D Program of China Nos.2021YFC2203502 and 2022YFF0711502the National Natural Science Foundation of China(NSFC)(12173077 and 12003062)+5 种基金the Tianshan Innovation Team Plan of Xinjiang Uygur Autonomous Region(2022D14020)the Tianshan Talent Project of Xinjiang Uygur Autonomous Region(2022TSYCCX0095)the Scientific Instrument Developing Project of the Chinese Academy of Sciences,grant No.PTYQ2022YZZD01China National Astronomical Data Center(NADC)the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administrated by the Chinese Academy of Sciences(CAS)Natural Science Foundation of Xinjiang Uygur Autonomous Region(2022D01A360)。
文摘To address the problem of real-time processing of ultra-wide bandwidth pulsar baseband data,we designed and implemented a pulsar baseband data processing algorithm(PSRDP)based on GPU parallel computing technology.PSRDP can perform operations such as baseband data unpacking,channel separation,coherent dedispersion,Stokes detection,phase and folding period prediction,and folding integration in GPU clusters.We tested the algorithm using the J0437-4715 pulsar baseband data generated by the CASPSR and Medusa backends of the Parkes,and the J0332+5434 pulsar baseband data generated by the self-developed backend of the Nan Shan Radio Telescope.We obtained the pulse profiles of each baseband data.Through experimental analysis,we have found that the pulse profiles generated by the PSRDP algorithm in this paper are essentially consistent with the processing results of Digital Signal Processing Software for Pulsar Astronomy(DSPSR),which verified the effectiveness of the PSRDP algorithm.Furthermore,using the same baseband data,we compared the processing speed of PSRDP with DSPSR,and the results showed that PSRDP was not slower than DSPSR in terms of speed.The theoretical and technical experience gained from the PSRDP algorithm research in this article lays a technical foundation for the real-time processing of QTT(Qi Tai radio Telescope)ultra-wide bandwidth pulsar baseband data.
基金supported by the earmarked fund for the Anhui Provincial Modern Agri-industry Technology Research System(AHCYJSTX-08)the China Agriculture Research System of MOF and MARA(CARS-48)。
文摘The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.Therefore,in this study,the effects of three different processing methods,i.e.,microwave,ultrasound,and high temperature-pressure(HTP)treatments,on the digestion stability of TM from Chinese mitten crab muscle and the allergenicity of TM digestion products were explored.sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that microwaving had little effect on the digestion stability of TM.In contrast,ultrasound and HTP treatments facilitated the degradation of TM.Similarly,Western blotting and inhibition ELISA indicated that the IgE-binding activity of TM was significantly reduced after treatment with ultrasound or HTP.Among the three different proces sing methods,HTP was the most effective method for improving digestibility of TM and reducing immunoreactivity.This finding provides new insights into treatments for crab allergies.
文摘Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily hydrolyzed to release cyanide salt compounds which is toxic to the nervous system especially the optic nerve, sometimes leading to optic neuropathy and visual impairment. Aim: The aim of this study is to find out the impact of selected processing methods of high-level cyanide in cassava on optic neuropathy in Wistar albino rats. Methodology: Twenty-four Wistar albino rats were fed with different concentration and duration of predetermined high-cyanide content cassava root cultivar which was processed using different processing methods adopted by various communities in Rivers State, Nigeria (for human consumption). A control group of 3 Wistar albino rats was fed with normal “Growth Mesh” meals. The pre and post weights of the animals and the fundoscopic optic nerve status of the rats were evaluated after 30 and 60 days. SPSS Version 25 was employed for descriptive and inferential statistical analyses. A p-value of ≤0.05 was considered statistically significant. Results: The Cassava species available in Rivers State have high cyanide content (2336.79 mg CN<sup>-</sup>/kg dry weight of cassava). There was statistically significant reduction in the cyanide content (p = 0.000) depending on the various common processing methods (into garri for human consumption): 24 hours, 48 hours, fermentation;with and without red palm oil additive. The individual weights as well as the mean weight of the 24 rats in the experimental group increased gradually from the first week to the 9<sup>th</sup> week with a slight weight reduction on the third and fourth weeks which was not statistically significant (p = 0.092). However, there was a steady increase in the weights of the animals in the control group throughout the 9 weeks. Varying degrees of optic neuropathy occurred, worse with the rats that had 24-hour fermented cassava twice daily for 60 days. The intra and inter group differences in the optic disc changes was statistically significant (p = 0.000). Conclusion: Longer duration of processing cassava roots into garri for human consumption reduces its cyanide content and minimizes the adverse impact on the optic nerve.
基金Supported by Science and Technology Project for the Construction of Chengde National Sustainable Development Agenda Innovation Demonstration Zone(202007F004)Science and Technology Business Project of Hebei Provincial Department of Science and Technology(V1623138472760)。
文摘[Objectives]The paper was to compare the effects of different initial processing methods on atractylodin content of Atractylodes chinensis.[Methods]The atractylodin content of A.chinensis obtained by different initial processing methods was determined by HPLC.The loss rate on drying was determined by weighing.[Results]In the study of drying methods,the atractylodin content varied significantly among different thicknesses of slices,and the overall content of the product with the slice thickness of 5 mm was higher.Among different drying methods,constant temperature vacuum drying and shade drying of 5 mm slice resulted in the highest content of atractylodin.In the experiment of root impacting,root impacting twice received the best effect,and there was no significant difference in the atractylosin content of A.chinensis between drying in the sun and drying in the shade after root impacting twice(P>0.05).[Conclusions]Constant temperature vacuum drying or drying in the shade with the slice thickness of 5 mm,and root impacting twice is the best initial processing method,which leads to high atractylodin content of A.chinensis and good quality of medicinal materials.
基金financially supported by the 2018 annual three gorges follow-up research project of the three gorges office of the State Council (YYNY-2017-01)
文摘Qingke(highland hull-less barley)is a grain replete with substantial nutrients and bioactive ingredients.In this study,we evaluated the effects of boiling(BO),steaming(ST),microwave baking(MB),far-infrared baking(FB),steam explosion(SE),and deep frying(DF)on bioactive components,phenolic compounds,and antioxidant activities of Qingke compared with the effects of traditional roast(TR).Results showed that the soluble dietary fiber,beta-glucan and water-extractable pentosans of Qingke in dry heat processes of TR,SE,MB and FB had a higher content compared with other thermal methods and had a better antioxidant activity of hydroxyl radical scavenging and a better reduction capacity,while those in wet heat processes of BO and ST had a better antioxidant activity of ABTS radical scavenging and a better Fe^(2+) chelating ability.DF-and SE-Qingke had a higher content of tocopherol,phenolic,and flavonoid.Overall,6 free phenolic compounds and 12 bound phenolic compounds of Qingke were identified,and free phenolic compounds suffered more damage during thermal processing.Principal component analysis showed that SE had more advantages in retaining and improving the main biological active ingredients of Qingke,and it may be the best method for treating Qingke.
文摘Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).However,the sparse and disordered nature of the 3D point cloud poses significant challenges to feature extraction.Overcoming limitations is critical for 3D point cloud processing.3D point cloud object detection is a very challenging and crucial task,in which point cloud processing and feature extraction methods play a crucial role and have a significant impact on subsequent object detection performance.In this overview of outstanding work in object detection from the 3D point cloud,we specifically focus on summarizing methods employed in 3D point cloud processing.We introduce the way point clouds are processed in classical 3D object detection algorithms,and their improvements to solve the problems existing in point cloud processing.Different voxelization methods and point cloud sampling strategies will influence the extracted features,thereby impacting the final detection performance.
基金supported by Key R&D Project of Liaoning Province,under Grant Research and Demonstration of Key Technologies for Deep Processing and Comprehensive Utilization of Northeast Hazelnuts(2020JH2/10200037)Service Local Project of Liaoning Province,under Grant Demonstration and Promotion of new deep-processing technology for comprehensive utilization of Northeast Hazelnuts(LSNFW201903)horizontal subject,under Grant Demonstration and Promotion of key technologies for transformation and deep processing of wild hazelnut forest in northwestern Liaoning(H2019388)。
文摘Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processing methods.Here,we conducted a lipidomics analysis using UPLC-QTOF-MS to characterize the lipid composition of cold-pressed hazelnut oil(CPO),ultrasonic-assisted hexane hazelnut oil(UHO)and enzyme-assisted aqueous hazelnut oil(EAO).A total of 10 subclasses of 98 lipids were identified,including35 glycerolipids(GLs),56 glycerophospholipids(GPs)and 7 sphingolipids(SPs).The total lipid and GL content were the highest in CPO,GP content was the highest in UHO and the ceramide content in SPs was most abundant in EAO.Multivariate statistical analysis showed that the lipid profiles of hazelnut oil prepared with different processing methods varied.Twelve significantly different lipids(TAG 54:3,TAG 52:2,TAG54:4,TAG 54:2,TAG 52:3,TAG 54:5,DAG 36:2,DAG 36:4,DAG 36:3,PC 36:2,PA 36:2 and PE 36:3)were identified,and these lipids could potentially be used as biomarkers to distinguish between hazelnut oil subjected to different processing methods.Our results provide useful information for hazelnut oil applications and new insight into the effects of edible oil processing.
基金National Natural Science Foundtion of China(No.11435011)Young Teachers Fund of Nanjing Institute of Technology,China(Nos.QKJ201907 and QKJ201908)+2 种基金China Scholarship Council(No.201708320319)Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.KYZZ16-0349)Qing Lan Project of Jiangsu Province,China。
文摘We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.
基金Supported by Scientific Research Fund Project of Yunnan Department of Education(2018JS719).
文摘Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical composition in jujube processed products,and impact of processing on chemical composition of jujube are reviewed,which could provide basic data for fully studying,developing and utilizing jujube by scholars and technical staff.
基金National Natural Science Foundation of China(Nos.51875199 and 51905165)Hunan Natural Science Fund Project(2019JJ50186)the Ke7y Research and Development Program of Hunan Province(No.2018GK2073).
文摘Due to the frequent changes of wind speed and wind direction,the accuracy of wind turbine(WT)power prediction using traditional data preprocessing method is low.This paper proposes a data preprocessing method which combines POT with DBSCAN(POT-DBSCAN)to improve the prediction efficiency of wind power prediction model.Firstly,according to the data of WT in the normal operation condition,the power prediction model ofWT is established based on the Particle Swarm Optimization(PSO)Arithmetic which is combined with the BP Neural Network(PSO-BP).Secondly,the wind-power data obtained from the supervisory control and data acquisition(SCADA)system is preprocessed by the POT-DBSCAN method.Then,the power prediction of the preprocessed data is carried out by PSO-BP model.Finally,the necessity of preprocessing is verified by the indexes.This case analysis shows that the prediction result of POT-DBSCAN preprocessing is better than that of the Quartile method.Therefore,the accuracy of data and prediction model can be improved by using this method.
基金Supported by The National Natural Science Foundation of China,No.30801362 and 81001074
文摘AIM:To develop a fuzzy classification method to score the texture features of pancreatic cancer in endoscopic ultrasonography(EUS)images and evaluate its utility in making prognosis judgments for patients with unresectable pancreatic cancer treated by EUS-guided interstitial brachytherapy.METHODS:EUS images from our retrospective database were analyzed.The regions of interest were drawn,and texture features were extracted,selected,and scored with a fuzzy classification method using a C++program.Then,patients with unresectable pancreatic cancer were enrolled to receive EUS-guided iodine 125 radioactive seed implantation.Their fuzzy classification scores,tumor volumes,and carbohydrate antigen 199(CA199)levels before and after the brachytherapy were recorded.The association between the changes in these parameters and overall survival was analyzed statistically.RESULTS:EUS images of 153 patients with pancreatic cancer and 63 non-cancer patients were analyzed.A total of 25 consecutive patients were enrolled,and they tolerated the brachytherapy well without any complications.There was a correlation between the change in the fuzzy classification score and overall survival(Spearman test,r=0.616,P=0.001),whereas no correlation was found to be significant between the change in tumor volume(P=0.663),CA199 level(P=0.659),and overall survival.There were 15 patients with a decrease in their fuzzy classification score after brachytherapy,whereas the fuzzy classification score increased in another 10 patients.There was a significant difference in overall survival between the two groups(67 d vs 151 d,P=0.001),but not in the change of tumor volume and CA199 level.CONCLUSION:Using the fuzzy classification method to analyze EUS images of pancreatic cancer is feasible,and the method can be used to make prognosis judgments for patients with unresectable pancreatic cancer treated by interstitial brachytherapy.
文摘The mechanical properties of metal yttrium such as strength, plasticity, hardness and elasticity were introduced. The purifying techniques of yttrium were discussed in detail. The processing methods for metal yttrium including extruding, forging, rolling, wiredrawing and welding were also introduced. Finally, the potential use of yttrium and its alloys were prospected.
基金Supported by National Science and Technology Support Program(2014BAD06B04-1-09)China Postdoctoral Fund(2016M601406)Heilongjiang Postdoctoral Fund(LBHZ15024)
文摘The grain production prediction is one of the most important links in precision agriculture. In the process of grain production prediction, mechanical noise caused by the factors of difference in field topography and mechanical vibration will be mixed in the original signal, which undoubtedly will affect the prediction accuracy. Therefore, in order to reduce the influence of vibration noise on the prediction accuracy, an adaptive Ensemble Empirical Mode Decomposition(EEMD) threshold filtering algorithm was applied to the original signal in this paper: the output signal was decomposed into a finite number of Intrinsic Mode Functions(IMF) from high frequency to low frequency by using the Empirical Mode Decomposition(EMD) algorithm which could effectively restrain the mode mixing phenomenon; then the demarcation point of high and low frequency IMF components were determined by Continuous Mean Square Error criterion(CMSE), the high frequency IMF components were denoised by wavelet threshold algorithm, and finally the signal was reconstructed. The algorithm was an improved algorithm based on the commonly used wavelet threshold. The two algorithms were used to denoise the original production signal respectively, the adaptive EEMD threshold filtering algorithm had significant advantages in three denoising performance indexes of signal denoising ratio, root mean square error and smoothness. The five field verification tests showed that the average error of field experiment was 1.994% and the maximum relative error was less than 3%. According to the test results, the relative error of the predicted yield per hectare was 2.97%, which was relative to the actual yield. The test results showed that the algorithm could effectively resist noise and improve the accuracy of prediction.
基金supported by National Key Research and Development Program of China from MOST (2016YFB0501503)
文摘The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark State Magnetometer)probes. This article introduces the main processing method, algorithm, and processing procedure of the HPM data. First, the FGM and CDSM probes are calibrated according to ground sensor data. Then the FGM linear parameters can be corrected in orbit, by applying the absolute vector magnetic field correction algorithm from CDSM data. At the same time, the magnetic interference of the satellite is eliminated according to ground-satellite magnetic test results. Finally, according to the characteristics of the magnetic field direction in the low latitude region, the transformation matrix between FGM probe and star sensor is calibrated in orbit to determine the correct direction of the magnetic field. Comparing the magnetic field data of CSES and SWARM satellites in five continuous geomagnetic quiet days, the difference in measurements of the vector magnetic field is about 10 nT, which is within the uncertainty interval of geomagnetic disturbance.
基金This work was funded by the National Natural Science Foundation of China under Grant(Nos.61772152,61502037)the Basic Research Project(Nos.JCKY2016206B001,JCKY2014206C002,JCKY2017604C010)and the Technical Foundation Project(No.JSQB2017206C002).
文摘Underwater target recognition is a key technology for underwater acoustic countermeasure.How to classify and recognize underwater targets according to the noise information of underwater targets has been a hot topic in the field of underwater acoustic signals.In this paper,the deep learning model is applied to underwater target recognition.Improved anti-noise Power-Normalized Cepstral Coefficients(ia-PNCC)is proposed,based on PNCC applied to underwater noises.Multitaper and normalized Gammatone filter banks are applied to improve the anti-noise capacity.The method is combined with a convolutional neural network in order to recognize the underwater target.Experiment results show that the acoustic feature presented by ia-PNCC has lower noise and are wellsuited to underwater target recognition using a convolutional neural network.Compared with the combination of convolutional neural network with single acoustic feature,such as MFCC(Mel-scale Frequency Cepstral Coefficients)or LPCC(Linear Prediction Cepstral Coefficients),the combination of the ia-PNCC with a convolutional neural network offers better accuracy for underwater target recognition.
基金Financial support of this work from National Natural Science Foundation of China(No.31370360 and No.81303218)National Science and Technology Support Programme(No.2011BAI07B07)Independent Subject of Beijing University of Chinese Medicine(No:JYBZZ-7S016)are gratefully acknowledged.
文摘Objective:A novel processing analytical framework of Chinese Material Medica (CMM) includes breeding process analysis,planting process analysis,producing process analysis and manufacture process analysis.In order to study this framework,we used quality control of honeysuckle flower (Lonicerae japonicae Flos) including diploid and tetraploid Lonicera japonica,and wild honeysuckle flower (Lonicerae Flos) including Lonicerae hypoglauca,Lonicerae confusa,Lonicerae fulvotomentosa and Lonicerae macranthoides as an example.Methods:A total of 360 samples were analyzed from three variables including species,growing areas,and optimization of processing methods.For quantitative analysis,chlorogenic acid (CA),isochlorogenic acid A (3,5-DCA),and isochlorogenic acid C (4,5-DCA) were measured with high performance liquid chromatography (HPLC).Results:The three organic acids contents are higher in wild honeysuckle flower than honeysuckle flower;L.japonica (tetraploid) is higher than L.japonica (diploid).Modern processing methods (kill-enzyme torrefaction and fixing machine drying) are popular in growing areas and are superior to traditional methods (sun and shade drying).Conclusions:Novel process analysis concepts in processing analytical technology (PAT) enriched the Chinese MateHal Medica contents.
基金Supported by projects of the National Key Research and Development Plan(Nos.2017YFC0602203,2017YFC0601606)the National Science and Technology Major Project Task(No.2016ZX05027-002-003)+1 种基金the National Natural Science Foundation of China(Nos.41604089,41404089)the State Key Program of National Natural Science of China(No.41430322)
文摘The conventional methods of edge detection can roughly delineate edge position of geological bodies,but there are still some problems such as low detection accuracy and being susceptible to noise interference.In this paper,three image processing methods,Canny,Lo G and Sobel operators are briefly introduced,and applied to edge detection to determine the edge of geological bodies.Furthermore,model data is built to analyze the edge detection ability of this image processing methods,and compare with conventional methods.Combined with gravity anomaly of Sichuan basin and magnetic anomaly of Zhurihe area,the detection effect of image processing methods is further verified in real data.The results show that image processing methods can be applied to effectively identify the edge of geological bodies.Moreover,when both positive and negative anomalies exist and noise is abundant,fake edge can be avoided and edge division is clearer,and satisfactory results of edge detection are obtained.
基金Supported by the National High-Tech Research and Development Plan of China(No.2007AA120302)
文摘A novel method,referred to as joint multiple subpulses processing,is developed to calibrate the nonideal transfer function of radio frequency front-end and I/Q imbalance in quadrature modulate/demodulate systems simultaneously,which frequently occur in wideband Synthetic Aperture Radar(SAR) systems.Based on the time-frequency relation of the chirp signal and the analyses of the channel errors in wideband SAR,joint multiple subpulses processing method is adopted to separate the image frequency component due to the I/Q channel error.Then,the complete description of the channel error is acquired for building the correction function,which is used to correct the radar raw echo in frequency domain.The validity and capability of this method are demonstrated by the experiments of the channel error correction on the high resolution SAR system with the effective bandwidth of 500 MHz.
文摘In this paper, I described the methods that I used for the creation of Xlets, which are Java applets that are developed for the IDTV environment;and the methods for online data retrieval and processing that I utilized in these Xlets. The themes that I chose for the Xlets of the IDTV applications are Earthquake and Tsunami Early Warning;Recent Seismic Activity Report;and Emergency Services. The online data regarding the Recent Seismic Activity Report application are provided by the Kandilli Observatory and Earthquake Research Institute (KOERI) of Bogazici University in Istanbul;while the online data for the Earthquake and Tsunami Early Warning and the Emergency Services applications are provided by the Godoro website which I used for storing (and retrieving by the Xlets) the earthquake and tsunami early warning simulation data, and the DVB network subscriber data (such as name and address information) for utilizing in the Emergency Services (Police, Ambulance and Fire Department) application. I have focused on the methodologies to use digital television as an efficient medium to convey timely and useful information regarding seismic warning data to the public, which forms the main research topic of this paper.