The change and control of nitrogen content in molten steel was investigated through the production process of "LDBAr-LF-RH-CC". Results show that nitrogen content reduces gradually in converter-steelmaking s...The change and control of nitrogen content in molten steel was investigated through the production process of "LDBAr-LF-RH-CC". Results show that nitrogen content reduces gradually in converter-steelmaking stage, rises rapidly from the end of converter process to the end of argon station process, continues to increase in ladle furnace process, and decreases slightly in RH refining stage. Since nitrogen is removed mainly by BOF steelmaking and vacuum refining operations, nitrogen in molten steel should be removed as much as possible in these two operations. However, nitrogen uptake should be minimized in other operations of molten steel production process.展开更多
Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutua...Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutual feedback are adopted among nodes at the same layer in Elman network, it has stronger ability of dynamic approximation, and can describe any non linear dynamic system. After the structure and mathematical description being given, dynamic back propagation (BP) algorithm of training weights of Elman neural network is deduced. At last, the network is used to predict ash content of black amber in jigging production process. The results show that this neural network is powerful in predicting and suitable for modeling, predicting, and controling of complex production process.展开更多
WHILE much of Africa＇s oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. （CNOOC） struck a ...WHILE much of Africa＇s oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. （CNOOC） struck a $2-billion licensing deal to develop a vast petroleum field in Uganda. Signed in late September, it was the first oil production license to be issued in Uganda,展开更多
Online monitoring and diagnosis of production processes face great challenges due to the nonlinearity and multivariate of complex industrial processes.Traditional process monitoring methods employ kernel function or m...Online monitoring and diagnosis of production processes face great challenges due to the nonlinearity and multivariate of complex industrial processes.Traditional process monitoring methods employ kernel function or multilayer neural networks to solve the nonlinear mapping problem of data.However,the above methods increase the model complexity and are not interpretable,leading to difficulties in subsequent fault recognition/diagnosis/location.A process monitoring and diagnosis method based on the free energy of Gaussian-Bernoulli restricted Boltzmann machine(GBRBM-FE)was proposed.Firstly,a GBRBM network was established to make the probability distribution of the reconstructed data as close as possible to the probability distribution of the raw data.On this basis,the weights and biases in GBRBM network were used to construct F statistics,which represents the free energy of the sample.The smaller the energy of the sample is,the more normal the sample is.Therefore,F statistics can be used to monitor the production process.To diagnose fault variables,the F statistic for each sample was decomposed to obtain the Fv statistic for each variable.By analyzing the deviation degree between the corresponding variables of abnormal samples and normal samples,the cause of process abnormalities can be accurately located.The application of converter steelmaking process demonstrates that the proposed method outperforms the traditional methods,in terms of fault monitoring and diagnosis performance.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
Production planning under flexible job shop environment is studied.A mathematic model is formulated to help improve alternative process production.This model,in which genetic algorithm is used,is expected to result in...Production planning under flexible job shop environment is studied.A mathematic model is formulated to help improve alternative process production.This model,in which genetic algorithm is used,is expected to result in better production planning,hence towards the aim of minimizing production cost under the constraints of delivery time and other scheduling conditions.By means of this algorithm,all planning schemes which could meet all requirements of the constraints within the whole solution space are exhaustively searched so as to find the optimal one.Also,a case study is given in the end to support and validate this model.Our results show that genetic algorithm is capable of locating feasible process routes to reduce production cost for certain tasks.展开更多
[Objective] The aim was to discuss he produce and elimination rules of particles in Beijing during early 2008 Olympic Games. [Method] Based on the analysis of particulate matter online observation data and meteorologi...[Objective] The aim was to discuss he produce and elimination rules of particles in Beijing during early 2008 Olympic Games. [Method] Based on the analysis of particulate matter online observation data and meteorological data during the corresponding period in Chinese environmental science college, Hysplit Back trace model and Numerical weather prediction graphs, and combined with the different analytical methods on meteorological flow fields, a typical process of particles in Beijing during early 2008 Olympic Games was studied. [Result] The results indicated that during the ascent stage of PM2.5 concentration, the PM showed gradually aging phenomena; the process controlled by large scale synoptic system mainly. And the weak wind and the high humidity were not in favor of dispersion; the prolonged southerly air mass to bring the pollutant of Hebei, Taijin and Shandong to Beijing; mixing height and temperature curve took the importance role to the pollution. [Conclusion] The study provided theoretical basis for the discussion on factors influencing the production and elimination of particles in the air pollution process.展开更多
On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured wi...On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.展开更多
Since bamboo has the advantages of straight grain, beautiful color, high strength and toughness, and excellent abrasion resistance, bamboo-based panels have been widely used in the fields of vehicle, construction, shi...Since bamboo has the advantages of straight grain, beautiful color, high strength and toughness, and excellent abrasion resistance, bamboo-based panels have been widely used in the fields of vehicle, construction, ship building, furniture, and decoration to partly take the place of wood, steel, plastic etc in China. This paper briefly described the basic component units, including strip, sliver, and particle, of bamboo-based panel and pointed out that to design the structure of bamboo-based panels should follow the principle of symmetric structure, surface forming method, and structuring principle of equalizing stress. According to the processing methods and formation of component units, the authors classified the bamboo-based panels in China into 13 types and presented the manufacturing technique and uses of the bamboo products, such as plybamboo, bamboo flooring, and bamboo-wood composite products in detail. In the last part of the paper, much information were offered on the output, market, and selling prospect of each type of bamboo-based panels.展开更多
In this paper,we consider a production machine which may fail and it is necessary to repair the machine after each failure and there are two statuses for each repair;in one case,we should replace the machine because o...In this paper,we consider a production machine which may fail and it is necessary to repair the machine after each failure and there are two statuses for each repair;in one case,we should replace the machine because of catastrophic failure and in the other case,only small repairs are needed.Times between failures and repair and replace times are random and demands are satisfied by inventory during repairing and replacing the machine;shortage level is limited.We model described system as a Markov chain and develop an algorithm to compute the expected number of transitions among states.展开更多
This study takes the virtual business society environment(VBSE)practical training course as a case study and applies the theoretical framework of the context,input,process,product(CIPP)model to construct an evaluation...This study takes the virtual business society environment(VBSE)practical training course as a case study and applies the theoretical framework of the context,input,process,product(CIPP)model to construct an evaluation indicator system for the application of civic and politics in professional practice courses.The context evaluation is measured from the support of the VBSE practical training course into course civic and politics,teachers’cognition,and the integration of course objectives;the input evaluation is measured from the matching degree of teachers’civic and political competence,and the matching degree of teaching resources;the process evaluation is measured from the degree of implementation of civic and politics teaching and the degree of students’acceptance;and the product evaluation is measured from the degree of impact of civic and politics teaching.展开更多
Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an ...Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an advanced control strategy through integrating product and process control is established.The proposed multiscale scheme contains three layers for coordinated equipment control,process control and product quality control.In the upper layer,online control performance assessment is applied to reduce the quality variation and maximize the overall product performance （OPP）.It serves as supervisory control to update the recipe of the process controller in the middle layer.The process controller is designed as an exponentially weighted moving average （EWMA） run-to-run controller to reject disturbances,such as process shift,drift and tool worn out,that are exerted to the op-eration.The equipment in the process is individually controlled to maintain its optimal operational status and maximize the overall equipment effectiveness （OEE）,based on the set point given by the process controller.The ef-ficacy of the proposed integrated control scheme is demonstrated through case studies,where both the OPP （for product） and the OEE （for equipment） are enhanced.展开更多
Task decomposition is a kind of powerful technique increasingly being used within industry as a pathway for achieving product's developing success. In this paper, topology's concept in modern mathematics is us...Task decomposition is a kind of powerful technique increasingly being used within industry as a pathway for achieving product's developing success. In this paper, topology's concept in modern mathematics is used for task decomposition technique's deduction in product developing process. It puts fonvard the views of resolvability, measurability and connectivity of tasks and their practi-cal principles. Combined with an example of developing the typical mechanical product, it ex-plains the implementing method of task decomposition in Concurrent Engineering (CE).展开更多
Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ...Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.展开更多
Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on th...Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.展开更多
The RR soybean was quantitatively detected by ABI Prism 7300 sequence detector with PCR primers and fluorescence probes were designed according to the sequences of endogenous Lectin gene and exogenous CP4-EPSPS gene, ...The RR soybean was quantitatively detected by ABI Prism 7300 sequence detector with PCR primers and fluorescence probes were designed according to the sequences of endogenous Lectin gene and exogenous CP4-EPSPS gene, and the PCR systems were based on SYBR Green I and TaqMan. The standard curve of ACt between CP4-EPSPS gene and Lectin gene of the RR soybean in standard materials was generated and a linear regression equation was obtained. Quantification methods were optimized through two different real-time PCR chemistries, i.e. SYBR Green I and TaqMan, and the RR soybean contents were quantified in five standard samples and seven highly processed products by the two assays. Both methods are proved to be specific, highly sensitive and reliable for both identification and quantification of soybean DNA. The results indicate that the two optimized PCR system can be used for the practical quantitative detection of RR soybean in highly processed products.展开更多
Effective food professional personnel training strategies are explored and implemented,and interdisciplinary talents of food science and engineering in accordance with the background of intelligent agriculture are cul...Effective food professional personnel training strategies are explored and implemented,and interdisciplinary talents of food science and engineering in accordance with the background of intelligent agriculture are cultivated from the aspects of construction of teaching staff,reform of teaching content,upgrading of teaching model,construction of industry-education integration platform,which is of great significance to the modernization development of Chinese animal products processing industry.展开更多
[Objectives]This study aims to investigate the effects of Dachengqi decoctions made from different processed products of rhubarb on water intake,defecation amount,urination amount,urination volume,dryness of stool,men...[Objectives]This study aims to investigate the effects of Dachengqi decoctions made from different processed products of rhubarb on water intake,defecation amount,urination amount,urination volume,dryness of stool,mental state and activity of ABP mice.[Methods]Total 165 mice were randomly divided into Dachengqi decoction groups(made from different processed products of rhubarb,6 and 10 g/kg),positive control group,blank control group and model group.The administration dosage was 20 mL/kg.With the metabolic cage integral method,the effects of Dachengqi decoctions made from different processed products of rhubarb on the water intake,defecation amount,urination volume,dryness of stool,mental state and activity of ABP mice were compared.[Results]Dachengqi decoctions all could soften stool and promote rapid defecation of the mice with fecal peritonitis of excess heat stagnation type except that made from carbonized rhubarb.The water intakes of all the Dachengqi decoction groups were higher than those of the positive control group and the model group,except the carbonized rhubarb-made Dachengqi decoction groups.[Conclusions]Dachengqi decoctions all have obvious purgative effect except those made from carbonized rhubarb.展开更多
[Objectives]To study the volatile components and antibacterial effects of 11 kinds of Aurantii Fructus Immaturus processed products.[Methods]11 kinds of Aurantii Fructus Immaturus processed products were obtained acco...[Objectives]To study the volatile components and antibacterial effects of 11 kinds of Aurantii Fructus Immaturus processed products.[Methods]11 kinds of Aurantii Fructus Immaturus processed products were obtained according to the traditional processing method,the volatile oil was extracted by steam distillation,and the composition of volatile oil in the 11 kinds of processed products was analyzed by gas chromatography-mass spectrometry(GC-MS).the relative percentage content of each component in these 11 kinds of processed products was determined using the peak area normalization.The drug sensitivity activity of the volatile oil of these 11 kinds of processed products was tested using the K-B paper diffusion method and the minimum inhibition volume fraction of volatile oil of these 11 kinds of processed products was tested using the microdilution method.[Results]The highest yield of volatile oil of 11 kinds of these processed products was baking(5.193%),and the lowest was stir-bake to scorch(1.998%).A total of 36 chemical components were identified from the volatile oils of these 11 kinds of processed products.The components with the most volatile oil were stir-bake to scorch(24 kinds),and the components with the least volatile oil were the method of processing with rice-washed water(15 kinds).They contain 8 kinds of common chemical components,such as limonene,linalool,myrcene,α-pinene.The highest content of limonene came from processing with honey(60.93%),the lowest came from processing with rice-washed water(55.25%);the highest content of linalool came from processing with rice-washed water(7.139%),the lowest came from processing with honey(5.436%);the highest content of myrcene came from processing with honey(1.899%),the lowest came from stir-bake to scorch(1.632%);the highest content ofα-pinene came from raw Aurantii Fructus Immaturus(2.355%),and the lowest came from stir-bake to scorch(1.618%).The volatile oil of these 11 kinds of Aurantii Fructus Immaturus processed products has good antibacterial effect on Escherichia coli and Staphylococcus aureus.[Conclusions]The oil yields of volatile oils of 11 kinds of Aurantii Fructus Immaturus processed products are different,the content of limonene is significantly different,and the changes of other chemical components and their contents are not significantly different.The volatile oil of 11 kinds of Aurantii Fructus Immaturus processed products has certain antibacterial effect.展开更多
[Objectives] This study was conducted to study the anti-gout effect of Phellodendron amurense and its different processed products.[Methods] Extracts of P. amurense and its different processed products were fed to rat...[Objectives] This study was conducted to study the anti-gout effect of Phellodendron amurense and its different processed products.[Methods] Extracts of P. amurense and its different processed products were fed to rats respectively, to observe uric acid and creatinine in the serum and swelling index.[Results] Compared with the data of positive control, P. amurense and the processed products could significantly reduce the high uric acid and creatinine in the serum, and also could resist the swelling in rats.[Conclusions] P. amurense and its processed products showed different degrees of anti-gout effect, and the processing methods were found to have no remarkable impact on this effect.展开更多
文摘The change and control of nitrogen content in molten steel was investigated through the production process of "LDBAr-LF-RH-CC". Results show that nitrogen content reduces gradually in converter-steelmaking stage, rises rapidly from the end of converter process to the end of argon station process, continues to increase in ladle furnace process, and decreases slightly in RH refining stage. Since nitrogen is removed mainly by BOF steelmaking and vacuum refining operations, nitrogen in molten steel should be removed as much as possible in these two operations. However, nitrogen uptake should be minimized in other operations of molten steel production process.
文摘Based on the comparison of several methods of time series predicting, this paper points out that it is necessary to use dynamic neural network in modeling of complex production process. Because self feedback and mutual feedback are adopted among nodes at the same layer in Elman network, it has stronger ability of dynamic approximation, and can describe any non linear dynamic system. After the structure and mathematical description being given, dynamic back propagation (BP) algorithm of training weights of Elman neural network is deduced. At last, the network is used to predict ash content of black amber in jigging production process. The results show that this neural network is powerful in predicting and suitable for modeling, predicting, and controling of complex production process.
文摘WHILE much of Africa＇s oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. （CNOOC） struck a $2-billion licensing deal to develop a vast petroleum field in Uganda. Signed in late September, it was the first oil production license to be issued in Uganda,
基金the financial support from the National Key R&D Program of China(Grant No.2020YFA0405700).
文摘Online monitoring and diagnosis of production processes face great challenges due to the nonlinearity and multivariate of complex industrial processes.Traditional process monitoring methods employ kernel function or multilayer neural networks to solve the nonlinear mapping problem of data.However,the above methods increase the model complexity and are not interpretable,leading to difficulties in subsequent fault recognition/diagnosis/location.A process monitoring and diagnosis method based on the free energy of Gaussian-Bernoulli restricted Boltzmann machine(GBRBM-FE)was proposed.Firstly,a GBRBM network was established to make the probability distribution of the reconstructed data as close as possible to the probability distribution of the raw data.On this basis,the weights and biases in GBRBM network were used to construct F statistics,which represents the free energy of the sample.The smaller the energy of the sample is,the more normal the sample is.Therefore,F statistics can be used to monitor the production process.To diagnose fault variables,the F statistic for each sample was decomposed to obtain the Fv statistic for each variable.By analyzing the deviation degree between the corresponding variables of abnormal samples and normal samples,the cause of process abnormalities can be accurately located.The application of converter steelmaking process demonstrates that the proposed method outperforms the traditional methods,in terms of fault monitoring and diagnosis performance.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
基金Sponsored by Key Subject Foundation of Beijing Municipal(XK100070530)
文摘Production planning under flexible job shop environment is studied.A mathematic model is formulated to help improve alternative process production.This model,in which genetic algorithm is used,is expected to result in better production planning,hence towards the aim of minimizing production cost under the constraints of delivery time and other scheduling conditions.By means of this algorithm,all planning schemes which could meet all requirements of the constraints within the whole solution space are exhaustively searched so as to find the optimal one.Also,a case study is given in the end to support and validate this model.Our results show that genetic algorithm is capable of locating feasible process routes to reduce production cost for certain tasks.
基金Supported by Central Public Welfare Research Institutes of BasicResearch Operations Special Fund (2008KYYW01)
文摘[Objective] The aim was to discuss he produce and elimination rules of particles in Beijing during early 2008 Olympic Games. [Method] Based on the analysis of particulate matter online observation data and meteorological data during the corresponding period in Chinese environmental science college, Hysplit Back trace model and Numerical weather prediction graphs, and combined with the different analytical methods on meteorological flow fields, a typical process of particles in Beijing during early 2008 Olympic Games was studied. [Result] The results indicated that during the ascent stage of PM2.5 concentration, the PM showed gradually aging phenomena; the process controlled by large scale synoptic system mainly. And the weak wind and the high humidity were not in favor of dispersion; the prolonged southerly air mass to bring the pollutant of Hebei, Taijin and Shandong to Beijing; mixing height and temperature curve took the importance role to the pollution. [Conclusion] The study provided theoretical basis for the discussion on factors influencing the production and elimination of particles in the air pollution process.
文摘On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.
基金This study was supported by National 9th-Five-Year Plan Project (No. 96-011-02-07-02).
文摘Since bamboo has the advantages of straight grain, beautiful color, high strength and toughness, and excellent abrasion resistance, bamboo-based panels have been widely used in the fields of vehicle, construction, ship building, furniture, and decoration to partly take the place of wood, steel, plastic etc in China. This paper briefly described the basic component units, including strip, sliver, and particle, of bamboo-based panel and pointed out that to design the structure of bamboo-based panels should follow the principle of symmetric structure, surface forming method, and structuring principle of equalizing stress. According to the processing methods and formation of component units, the authors classified the bamboo-based panels in China into 13 types and presented the manufacturing technique and uses of the bamboo products, such as plybamboo, bamboo flooring, and bamboo-wood composite products in detail. In the last part of the paper, much information were offered on the output, market, and selling prospect of each type of bamboo-based panels.
文摘In this paper,we consider a production machine which may fail and it is necessary to repair the machine after each failure and there are two statuses for each repair;in one case,we should replace the machine because of catastrophic failure and in the other case,only small repairs are needed.Times between failures and repair and replace times are random and demands are satisfied by inventory during repairing and replacing the machine;shortage level is limited.We model described system as a Markov chain and develop an algorithm to compute the expected number of transitions among states.
基金2022 Southwest Forestry University Educational Science Research Project:Surface Project Grant(Project number:YB202227)Grant No.42 of 2024 Curriculum Civics Construction(Teaching Research Project)of Southwest Forestry University。
文摘This study takes the virtual business society environment(VBSE)practical training course as a case study and applies the theoretical framework of the context,input,process,product(CIPP)model to construct an evaluation indicator system for the application of civic and politics in professional practice courses.The context evaluation is measured from the support of the VBSE practical training course into course civic and politics,teachers’cognition,and the integration of course objectives;the input evaluation is measured from the matching degree of teachers’civic and political competence,and the matching degree of teaching resources;the process evaluation is measured from the degree of implementation of civic and politics teaching and the degree of students’acceptance;and the product evaluation is measured from the degree of impact of civic and politics teaching.
文摘Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an advanced control strategy through integrating product and process control is established.The proposed multiscale scheme contains three layers for coordinated equipment control,process control and product quality control.In the upper layer,online control performance assessment is applied to reduce the quality variation and maximize the overall product performance （OPP）.It serves as supervisory control to update the recipe of the process controller in the middle layer.The process controller is designed as an exponentially weighted moving average （EWMA） run-to-run controller to reject disturbances,such as process shift,drift and tool worn out,that are exerted to the op-eration.The equipment in the process is individually controlled to maintain its optimal operational status and maximize the overall equipment effectiveness （OEE）,based on the set point given by the process controller.The ef-ficacy of the proposed integrated control scheme is demonstrated through case studies,where both the OPP （for product） and the OEE （for equipment） are enhanced.
基金the State High-Tech Developmets Plan of Cina(No.863-511-9930-007)
文摘Task decomposition is a kind of powerful technique increasingly being used within industry as a pathway for achieving product's developing success. In this paper, topology's concept in modern mathematics is used for task decomposition technique's deduction in product developing process. It puts fonvard the views of resolvability, measurability and connectivity of tasks and their practi-cal principles. Combined with an example of developing the typical mechanical product, it ex-plains the implementing method of task decomposition in Concurrent Engineering (CE).
文摘Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.
文摘Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.
基金Supported by the Innovative Team Funds of Northeast Agricultural University (CXT004-3-2)Foundation of Heilongjiang Educational Committee(11511030)
文摘The RR soybean was quantitatively detected by ABI Prism 7300 sequence detector with PCR primers and fluorescence probes were designed according to the sequences of endogenous Lectin gene and exogenous CP4-EPSPS gene, and the PCR systems were based on SYBR Green I and TaqMan. The standard curve of ACt between CP4-EPSPS gene and Lectin gene of the RR soybean in standard materials was generated and a linear regression equation was obtained. Quantification methods were optimized through two different real-time PCR chemistries, i.e. SYBR Green I and TaqMan, and the RR soybean contents were quantified in five standard samples and seven highly processed products by the two assays. Both methods are proved to be specific, highly sensitive and reliable for both identification and quantification of soybean DNA. The results indicate that the two optimized PCR system can be used for the practical quantitative detection of RR soybean in highly processed products.
基金Supported by Chengdu Animal Products and Food Safety Science Popularization Base(2019-HM03-00073-SN)School-level First-class Curriculum Construction Project of Chengdu University"Online and Offline Mixed First-class Course-Animal Products Processing"(2020)+2 种基金First-class Curriculum Construction Project of Sichuan Province"Online and Offline Mixed First-class Course-Animal Products Processing"(2021)China Agricultural Industry Research System(CARS-43)Experimental Teaching Reform Project of Chengdu University in 2022(cdsyjg2022046).
文摘Effective food professional personnel training strategies are explored and implemented,and interdisciplinary talents of food science and engineering in accordance with the background of intelligent agriculture are cultivated from the aspects of construction of teaching staff,reform of teaching content,upgrading of teaching model,construction of industry-education integration platform,which is of great significance to the modernization development of Chinese animal products processing industry.
基金Supported by National Natural Science Foundation of China(81360524)National Traditional Chinese Medicine Characteristic Technology Inheritance Talent Training Project(20184828005)+2 种基金Youth Foundation of Guangxi University of Chinese Medicine(2019QN036)Natural Science Foundation of Guangxi(2020GXNSFAA259059)In-hospital Preparation Development Project of the First Affiliated Hospital of Guangxi University of Chinese Medicine(2017ZJ001).
文摘[Objectives]This study aims to investigate the effects of Dachengqi decoctions made from different processed products of rhubarb on water intake,defecation amount,urination amount,urination volume,dryness of stool,mental state and activity of ABP mice.[Methods]Total 165 mice were randomly divided into Dachengqi decoction groups(made from different processed products of rhubarb,6 and 10 g/kg),positive control group,blank control group and model group.The administration dosage was 20 mL/kg.With the metabolic cage integral method,the effects of Dachengqi decoctions made from different processed products of rhubarb on the water intake,defecation amount,urination volume,dryness of stool,mental state and activity of ABP mice were compared.[Results]Dachengqi decoctions all could soften stool and promote rapid defecation of the mice with fecal peritonitis of excess heat stagnation type except that made from carbonized rhubarb.The water intakes of all the Dachengqi decoction groups were higher than those of the positive control group and the model group,except the carbonized rhubarb-made Dachengqi decoction groups.[Conclusions]Dachengqi decoctions all have obvious purgative effect except those made from carbonized rhubarb.
基金the First Phase of Teaching Ability Training Program for Young Backbone Teachers of Guangxi University of Chinese Medicine(04B1805815)Program of Key Laboratory for Extraction and Purification and Quality Analysis of TCM in 2014(Gui Jiao Ke Yan[2014]No.6)。
文摘[Objectives]To study the volatile components and antibacterial effects of 11 kinds of Aurantii Fructus Immaturus processed products.[Methods]11 kinds of Aurantii Fructus Immaturus processed products were obtained according to the traditional processing method,the volatile oil was extracted by steam distillation,and the composition of volatile oil in the 11 kinds of processed products was analyzed by gas chromatography-mass spectrometry(GC-MS).the relative percentage content of each component in these 11 kinds of processed products was determined using the peak area normalization.The drug sensitivity activity of the volatile oil of these 11 kinds of processed products was tested using the K-B paper diffusion method and the minimum inhibition volume fraction of volatile oil of these 11 kinds of processed products was tested using the microdilution method.[Results]The highest yield of volatile oil of 11 kinds of these processed products was baking(5.193%),and the lowest was stir-bake to scorch(1.998%).A total of 36 chemical components were identified from the volatile oils of these 11 kinds of processed products.The components with the most volatile oil were stir-bake to scorch(24 kinds),and the components with the least volatile oil were the method of processing with rice-washed water(15 kinds).They contain 8 kinds of common chemical components,such as limonene,linalool,myrcene,α-pinene.The highest content of limonene came from processing with honey(60.93%),the lowest came from processing with rice-washed water(55.25%);the highest content of linalool came from processing with rice-washed water(7.139%),the lowest came from processing with honey(5.436%);the highest content of myrcene came from processing with honey(1.899%),the lowest came from stir-bake to scorch(1.632%);the highest content ofα-pinene came from raw Aurantii Fructus Immaturus(2.355%),and the lowest came from stir-bake to scorch(1.618%).The volatile oil of these 11 kinds of Aurantii Fructus Immaturus processed products has good antibacterial effect on Escherichia coli and Staphylococcus aureus.[Conclusions]The oil yields of volatile oils of 11 kinds of Aurantii Fructus Immaturus processed products are different,the content of limonene is significantly different,and the changes of other chemical components and their contents are not significantly different.The volatile oil of 11 kinds of Aurantii Fructus Immaturus processed products has certain antibacterial effect.
基金Supported by Youth and Guidance Fund of Liaoning Institute of Science and Technology(Yd201605)
文摘[Objectives] This study was conducted to study the anti-gout effect of Phellodendron amurense and its different processed products.[Methods] Extracts of P. amurense and its different processed products were fed to rats respectively, to observe uric acid and creatinine in the serum and swelling index.[Results] Compared with the data of positive control, P. amurense and the processed products could significantly reduce the high uric acid and creatinine in the serum, and also could resist the swelling in rats.[Conclusions] P. amurense and its processed products showed different degrees of anti-gout effect, and the processing methods were found to have no remarkable impact on this effect.
