According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are prese...According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.展开更多
In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot...In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.展开更多
Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch ...Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.展开更多
Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identificatio...Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.展开更多
The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the hu...The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.展开更多
Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transfo...Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.展开更多
The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-bas...The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.展开更多
Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater...Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.展开更多
[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compa...[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.展开更多
A fast and high precision spatial domain algorithm is presented for forward modeling of two-dimensional(2D)body gravity anomalies of arbitrary shape and density distribution.The new algorithm takes advantage of the co...A fast and high precision spatial domain algorithm is presented for forward modeling of two-dimensional(2D)body gravity anomalies of arbitrary shape and density distribution.The new algorithm takes advantage of the convolution properties of the expression for 2D gravity anomalies,uses a rectangular cell as a grid subdivision unit,and then 2D bodies with irregular cross-sections are approximated by a combination of 2D bodies with a rectangular cross section.The closed-form expression is used to calculate the gravitational anomalies of the combination of 2D bodies with a rectangular cross section.To improve computing effi ciency,the new algorithm uses a fast algorithm for the implementation of the Toeplitz matrix and vector multiplication.The synthetic 2D models with rectangular and circular cross-sections and constant and variable densities are designed to evaluate the computational accuracy and speed of the new algorithm.The experiment results show that the computation costs less than 6 s for a grid subdivision with 10000×10000 elements.Compared to the traditional forward modeling methods,the proposed method significantly improved computational effi ciency while guaranteeing computational accuracy.展开更多
Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were prop...Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were proposed and studied during the past decade. Among them, tension-based compliant bistable mechanisms, that incorporate tension pivots as their flexible members, feature in short travel distance and low power consuming. So far, the design of this kind of bistable mechanisms is done using finite element method through trial and error, thus is time-consuming. By treating the tension pivots as fixed-guided segments and their elongation as a spring, we developed a novel three degree-of-freedom (3-DOF) pseudo-rigid-body model (PRBM) for this kind of bistable mechanisms. The principle of virtual work is used to derive the force-deflection relationship of the PRBM model. The comparison between the PRBM results and the experimental results of the force-deflection characteristics shows that the PRBM can predict not only the bistable behavior of the tension-based bistable mechanisms, but also their soft spring-like post-bistable behavior and the spring-like force-deflection characteristics when pulling in the reverse direction from the as-fabricated position, which is called reverse behavior. The 3-DOF PRBM can be used to design and identify tension-based bistable mechanisms. Using the PRBM instead of the trial-and-error method can greatly reduce the development time of this kind of bistable mechanisms.展开更多
This paper presents a new approach for modeling the human body by considering the motion state and the shape of whole body. The body model consists of a skeleton kinematic model and a surface model. The former is used...This paper presents a new approach for modeling the human body by considering the motion state and the shape of whole body. The body model consists of a skeleton kinematic model and a surface model. The former is used to determine the posture of the body,and the latter is used to generate the body shape according to the given posture. The body surface is reconstructed with multi-segment B-spline surfaces based on the 3D scan data from a real human body.Using only a few joints parameters and the original surface scan data, the various body postures and the shape can be generated easily. The model has a strong potential of being used for ergonomic design,garment design, virtual reality environment, as well as creating human animation, etc.展开更多
One of the key problems in the concept of planetary systems origin and early evolution is solid bodies formation in the protoplanetary gas-dust disc around young stars. Dust particles interactions inside the original ...One of the key problems in the concept of planetary systems origin and early evolution is solid bodies formation in the protoplanetary gas-dust disc around young stars. Dust particles interactions inside the original fluffy dust clusters of fractal nature resulted from gravitational instability and fragmentation in the disc’s central plane areassumed as the most plausible mechanism of primary bodies set up owing to particles integration within the clusters. Follow upcollisions are regarded to be responsible for eventual growth of primary bodies to the size of planetesimals. We discuss this scenario including chemical nature of particles depending on the disc’s radial temperature distribution and phase transitions. The mathematical model is developed based on the method of penetrating particles with the account for internal structure/properties of bodies involved, complicated patterns of their interaction, and phenomenological approach to describe energy distribution in the contact zone. The model is mainly addressed to the stage of formed solid bodies collisions. The results of numerical evaluation of the model are described involving some constraints for complete or partial destruction of colliding bodies followed by either scattering of collisional fragments orpartial back accumulation.展开更多
This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is em...This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is emphasized and a rationale for this is given. Remarkably, the proposed solutions of this model have incorporated all 580 supernova redshifts in the Union2 database. Therefore, one can usefully apply this thermodynamic law in the form of a continually expanding black-body universe model. To our knowledge, no other cosmological model has achieved such high-precision observational correlation.展开更多
Intra-body communication (IBC) is a technology using the human body as a transmission medium for electrical signals. Compared with the short distance wireless communication technologies, it has several novel character...Intra-body communication (IBC) is a technology using the human body as a transmission medium for electrical signals. Compared with the short distance wireless communication technologies, it has several novel characteristics. The modeling, simulation and implement of intra-body communication are reviewed. Firstly, the transfer function of the galvanic coupling IBC is deduced, and the in vivo measurements results and the corresponding mathematical simulations results based on the proposed transfer function are discussed. Secondly, a finite-element method for modeling the whole human body is introduced, and the simulation results of the galvanic coupling IBC based on the whole human body and the corresponding in vivo measurement results are discussed. Finally, the implement methods of the intra-body communication as well as a novel IBC system based on Mach-Zehnder EO modulator are introduced and analyzed, while some conclusions are achieved.展开更多
This research is an active pedagogical experience with surgeons who are specialized in reconstructive plastic surgery and nursing. The guiding questions were the statements of each Surgeon’s clients and what they thi...This research is an active pedagogical experience with surgeons who are specialized in reconstructive plastic surgery and nursing. The guiding questions were the statements of each Surgeon’s clients and what they think about them. Modeling the imaginary bodies of the patients and identify what they built in their minds, highlighting topics and the discussion about the practice made in clay modeling. Eight bodies were modeled, with six bodies with all the senses and two incomplete bodies with only the regions of the breasts and buttocks. It was concluded that there are diverse issues emerging such as gender, ethics, care, spirituality and dream as the fulfillment of the wishes of the patients. Where in the body can these surgeons act to improve the patients’ physical and quality of life? There is an important theme when we are generally welcoming women into an anamnesis that considers their body as a whole, but what is their expectation for each patient? This paper showed the importance of the preoperative evaluation of this whole, for the indication of repairs or contraindications of procedures that aim to improve the physical of the patients, with possible bodily surgical modifications as a form of modeling through liposuction, grafting or excision with lipectomy and withdrawal of excess skin to mitigate the effects of the transformations that deform the physical and end up harming the human relationship, especially women. This is a qualitative method showing the meanings of the bodies of the women represented in the modeling by the Surgeons. However, some surgeons stand out by the look of their practice, as greater sensitivity looking at the body as a whole, spiritual and emotional. They need to use their skills as surgical art and gift, to try to achieve a means, but not an end.展开更多
The finite-element modeling and simulations of the intra-body communication (IBC) were investigated to provide a theoretical basis for biomedical monitoring. A finite-element model for the whole human body was devel...The finite-element modeling and simulations of the intra-body communication (IBC) were investigated to provide a theoretical basis for biomedical monitoring. A finite-element model for the whole human body was developed to simulate the IBC. The simulation of galvanic coupling IBC and electrostatic coupling IBC were implemented along with different signal transmission paths, and their attenuations were calculated. Our study showed that the position near the signal electrode had higher potential than other positions in the two types of IBC, while the potential generally decreased along the axis of the body parts. Both signal attenuations of the two types IBC increased with increasing signal transmission distance, and the electrostatic coupling IBC had comparatively higher receiving potential than the galvanic coupling IBC. The results indicated that the proposed modeling method could be used for the research of biomedical monitoring based on IBC technology.展开更多
In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting sy...In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.展开更多
文摘According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.
基金Supported by the Sinopec Science and Technology Project(P21040-1).
文摘In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.
基金supported by National Natural Science Foundation of China (Grant No. 60873003)
文摘Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.
基金supported by the grants from the Natural Science Foundation of Hubei Province(No.2020CFB780)the Fundamental Research Funds for the Central Universities(No.2017KFYXJJ020).
文摘Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.
基金Supported by MOE(Ministry of Education in China)Project of Humanities and Social Sciences(No.13YJC890027)the National Natural Science Foundations of China(No.61003173)+1 种基金the Fundamental Research Funds for the Central Universities(No.2012ZZ0063)the Science and Technology Project of Guangzhou City(No.2012J4100002)
文摘The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.
基金supported by the National Nature Science Foundation of China(Nos.41504102 and 41604037)National Science and Technology Major Project(No.2016ZX05015-006)Yangtze University Youth Found(No.2015cqn32)
文摘Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.
基金Research Supporting Project Number(RSP2024R421),King Saud University,Riyadh,Saudi Arabia。
文摘The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.
基金This work was funded by the Science and Technology Program of Gansu Province(23ZDFA017,22ZD6FA005)the Third Xinjiang Scientific Expedition Program(2022xjkk0802).
文摘Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.
基金Health Science and Technology Program of Inner Mongolia Autonomous Region(202201450)Key R&D and Achievement Transformation Project of Inner Mongolia Autonomous Region(2023YFDZ0063)+3 种基金Project of Improving the Scientific Research and Innovation Ability of Young Teachers in Universities Directly under Inner Mongolia Autonomous Region(GXKY22139)Open Fund Project of National and Local Joint Engineering Research Center for Mongolian Medicine Research and Development(MDK2021026)Key Discipline Construction Project of Traditional Chinese Pharmacy(Mongolian Pharmacy)of Inner Mongolia Minzu University(ZYX007)Basic Operating Expenses for Scientific Research of Universities Directly under Inner Mongolia Autonomous Region in 2022"Study on the Change of Shikonin Content During Milk Processed Arnebiae Radix".
文摘[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.
基金This work is jointly sponsored by the National Natural Science Foundation of China(No.41404106)the Scientific Research Startup Fund for Doctoral Program of Guilin University of Technology,Guangxi Natural Science Foundation Program(No.2018GXNSFBA138049)Guangxi Natural Science Foundation Program for Innovation Research Team(No.2016GXNSFGA380004).
文摘A fast and high precision spatial domain algorithm is presented for forward modeling of two-dimensional(2D)body gravity anomalies of arbitrary shape and density distribution.The new algorithm takes advantage of the convolution properties of the expression for 2D gravity anomalies,uses a rectangular cell as a grid subdivision unit,and then 2D bodies with irregular cross-sections are approximated by a combination of 2D bodies with a rectangular cross section.The closed-form expression is used to calculate the gravitational anomalies of the combination of 2D bodies with a rectangular cross section.To improve computing effi ciency,the new algorithm uses a fast algorithm for the implementation of the Toeplitz matrix and vector multiplication.The synthetic 2D models with rectangular and circular cross-sections and constant and variable densities are designed to evaluate the computational accuracy and speed of the new algorithm.The experiment results show that the computation costs less than 6 s for a grid subdivision with 10000×10000 elements.Compared to the traditional forward modeling methods,the proposed method significantly improved computational effi ciency while guaranteeing computational accuracy.
基金supported by National Natural Science Foundation of China(Grant No.50805110)Foundation for Key Program of Ministry of Education of China (Grant No.109145)Fundamental Research Funds for the Central Universities of China (Grant No.JY10000904010)
文摘Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were proposed and studied during the past decade. Among them, tension-based compliant bistable mechanisms, that incorporate tension pivots as their flexible members, feature in short travel distance and low power consuming. So far, the design of this kind of bistable mechanisms is done using finite element method through trial and error, thus is time-consuming. By treating the tension pivots as fixed-guided segments and their elongation as a spring, we developed a novel three degree-of-freedom (3-DOF) pseudo-rigid-body model (PRBM) for this kind of bistable mechanisms. The principle of virtual work is used to derive the force-deflection relationship of the PRBM model. The comparison between the PRBM results and the experimental results of the force-deflection characteristics shows that the PRBM can predict not only the bistable behavior of the tension-based bistable mechanisms, but also their soft spring-like post-bistable behavior and the spring-like force-deflection characteristics when pulling in the reverse direction from the as-fabricated position, which is called reverse behavior. The 3-DOF PRBM can be used to design and identify tension-based bistable mechanisms. Using the PRBM instead of the trial-and-error method can greatly reduce the development time of this kind of bistable mechanisms.
基金This work was funded by the Science & Technology Development Fund of Shanghai, China( No. 005111081)
文摘This paper presents a new approach for modeling the human body by considering the motion state and the shape of whole body. The body model consists of a skeleton kinematic model and a surface model. The former is used to determine the posture of the body,and the latter is used to generate the body shape according to the given posture. The body surface is reconstructed with multi-segment B-spline surfaces based on the 3D scan data from a real human body.Using only a few joints parameters and the original surface scan data, the various body postures and the shape can be generated easily. The model has a strong potential of being used for ergonomic design,garment design, virtual reality environment, as well as creating human animation, etc.
文摘One of the key problems in the concept of planetary systems origin and early evolution is solid bodies formation in the protoplanetary gas-dust disc around young stars. Dust particles interactions inside the original fluffy dust clusters of fractal nature resulted from gravitational instability and fragmentation in the disc’s central plane areassumed as the most plausible mechanism of primary bodies set up owing to particles integration within the clusters. Follow upcollisions are regarded to be responsible for eventual growth of primary bodies to the size of planetesimals. We discuss this scenario including chemical nature of particles depending on the disc’s radial temperature distribution and phase transitions. The mathematical model is developed based on the method of penetrating particles with the account for internal structure/properties of bodies involved, complicated patterns of their interaction, and phenomenological approach to describe energy distribution in the contact zone. The model is mainly addressed to the stage of formed solid bodies collisions. The results of numerical evaluation of the model are described involving some constraints for complete or partial destruction of colliding bodies followed by either scattering of collisional fragments orpartial back accumulation.
文摘This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is emphasized and a rationale for this is given. Remarkably, the proposed solutions of this model have incorporated all 580 supernova redshifts in the Union2 database. Therefore, one can usefully apply this thermodynamic law in the form of a continually expanding black-body universe model. To our knowledge, no other cosmological model has achieved such high-precision observational correlation.
文摘Intra-body communication (IBC) is a technology using the human body as a transmission medium for electrical signals. Compared with the short distance wireless communication technologies, it has several novel characteristics. The modeling, simulation and implement of intra-body communication are reviewed. Firstly, the transfer function of the galvanic coupling IBC is deduced, and the in vivo measurements results and the corresponding mathematical simulations results based on the proposed transfer function are discussed. Secondly, a finite-element method for modeling the whole human body is introduced, and the simulation results of the galvanic coupling IBC based on the whole human body and the corresponding in vivo measurement results are discussed. Finally, the implement methods of the intra-body communication as well as a novel IBC system based on Mach-Zehnder EO modulator are introduced and analyzed, while some conclusions are achieved.
文摘This research is an active pedagogical experience with surgeons who are specialized in reconstructive plastic surgery and nursing. The guiding questions were the statements of each Surgeon’s clients and what they think about them. Modeling the imaginary bodies of the patients and identify what they built in their minds, highlighting topics and the discussion about the practice made in clay modeling. Eight bodies were modeled, with six bodies with all the senses and two incomplete bodies with only the regions of the breasts and buttocks. It was concluded that there are diverse issues emerging such as gender, ethics, care, spirituality and dream as the fulfillment of the wishes of the patients. Where in the body can these surgeons act to improve the patients’ physical and quality of life? There is an important theme when we are generally welcoming women into an anamnesis that considers their body as a whole, but what is their expectation for each patient? This paper showed the importance of the preoperative evaluation of this whole, for the indication of repairs or contraindications of procedures that aim to improve the physical of the patients, with possible bodily surgical modifications as a form of modeling through liposuction, grafting or excision with lipectomy and withdrawal of excess skin to mitigate the effects of the transformations that deform the physical and end up harming the human relationship, especially women. This is a qualitative method showing the meanings of the bodies of the women represented in the modeling by the Surgeons. However, some surgeons stand out by the look of their practice, as greater sensitivity looking at the body as a whole, spiritual and emotional. They need to use their skills as surgical art and gift, to try to achieve a means, but not an end.
基金Supported by the National Natural Science Foundation of China(60801050)the Excellent Talent Fund of Beijing(2011)Excellent Young Scholars Research Fund of Beijing Institute ofTechnology(2012)
文摘The finite-element modeling and simulations of the intra-body communication (IBC) were investigated to provide a theoretical basis for biomedical monitoring. A finite-element model for the whole human body was developed to simulate the IBC. The simulation of galvanic coupling IBC and electrostatic coupling IBC were implemented along with different signal transmission paths, and their attenuations were calculated. Our study showed that the position near the signal electrode had higher potential than other positions in the two types of IBC, while the potential generally decreased along the axis of the body parts. Both signal attenuations of the two types IBC increased with increasing signal transmission distance, and the electrostatic coupling IBC had comparatively higher receiving potential than the galvanic coupling IBC. The results indicated that the proposed modeling method could be used for the research of biomedical monitoring based on IBC technology.
基金This research project was financially supported by China Ocean Mineral Resources R&D Association(Grant No.DY105-03-02-17)Ph.D.Programs Foundation of Ministry of Education of China(Grant No.20060008025)
文摘In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.