This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),YGdTbDyHo.Results indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with t...This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),YGdTbDyHo.Results indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed homogeneously.Upon hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any secondary phase precipitated.The alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy could absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period observed.The reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral interstices.These results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.展开更多
High-temperature superconducting(HTS)rare-earth Ba_(2)Cu_(3)O_(7-x)(REBCO)coated conductors(CCs)have significant potential in high-current and high-field applications.However,owing to the weak interface strength of th...High-temperature superconducting(HTS)rare-earth Ba_(2)Cu_(3)O_(7-x)(REBCO)coated conductors(CCs)have significant potential in high-current and high-field applications.However,owing to the weak interface strength of the laminated composite REBCO CCs,the damage induced by the thermal mismatch stress under a combination of epoxy impregnation,cooling,and quenching can cause premature degradation of the critical current.In this study,a three-dimensional(3D)electromagnetic-thermal-mechanical model based on the H-formulation and cohesive zone model(CZM)is developed to study the critical current degradation characteristics in an epoxy-impregnated REBCO CC caused by the damage during a quench.The temperature variation,critical current degradation of the REBCO CC,and its degradation onset temperature calculated by the numerical model are in agreement with the experimental data taken from the literature.The delamination of the REBCO CC predicted by the numerical model is consistent with the experimental result.The numerical results also indicate that the shear stress is the main contributor to the damage propagation inside the REBCO CC.The premature degradation of the critical current during a quench is closely related to the interface shear strength inside the REBCO CC.Finally,the effects of the coefficient of thermal expansion(CTE)of the epoxy resin,thickness of the substrate,and substrate material on the critical current degradation characteristics of the epoxy-impregnated REBCO CC during a quench are also discussed.These results help us understand the relationship between the current-carrying degradation and damage in the HTS applications.展开更多
An inorganic nanomaterials combination of Sm, Ag, and TiO2 was synthesized using supercritical fluid drying (SCFD) combined with solgel techniques. The structure, photocatalysis and bacteriostatic activity of the ma...An inorganic nanomaterials combination of Sm, Ag, and TiO2 was synthesized using supercritical fluid drying (SCFD) combined with solgel techniques. The structure, photocatalysis and bacteriostatic activity of the materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XRPS), photocatalytic performance, and antibacterial activity experiments. The XRD results showed that the average particle diameter of Sm/Ag/TiO2 was 14.62 nm and Ag and Sm ions were dispersed on the surface of TiO2 in a highly dispersed, amorphous form. The TEM image showed that the size of the particle was 12 nm using the scherer formula. The XPS result showed that the element Sm was doped and Ag was loaded inorganic nanomaterials successfully. Sm/Ag/TiO2 exhibited optimal photocatalytic properties at 600 oC, the photocatalytic optimal proportion of Sm/Ag/TiO2 was 2:2:100. When the molar ratio was 2:2:100, the bacteriostatic circle diameter was 16 mm for Staphylococcus aureus, the minimum bacteriostatic concentration was 200μg/mL for white beads coccus, and the minimum bactericidal concentration was 2×10^4μg/mL for white beads coccus. The SEM results showed that the antibacterial material attached to the candida albicans cell surface, cells appeared fold deformation. Therefore the inorganic nanomaterials Sm/Ag/TiO2 had high temperature resistance, good photocatalytic and antibacterial characteristics in visible light.展开更多
To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently f...To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.展开更多
This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by ...This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by co-precipitation.Activity tests indicated that the Sm_(0.15)Mn_(0.15)Ti catalyst showed superior performances,with a NO conversion of 100%and N_(2)selectivity above 87%at 180–300℃.The characterizations showed that Sm doping suppressed the crystallization of TiO_(2)and Mn2O3phases and increased the specific surface area and acidity.In particular,the surface area increased from 152.2 m^(2)·g^(-1)for Mn0.3Ti to 241.7 m^(2)·g^(-1)for Sm_(0.15)Mn_(0.15)Ti.These effects contributed to the high catalytic activity.The X-ray photoelectron spectroscopy (XPS) results indicated that the relative atomic ratios of Sm^(3+)/Sm and Oβ/O of Sm_(0.15)Mn_(0.15)Ti were 76.77at%and 44.11at%,respectively.The presence of Sm contributed to an increase in surface-absorbed oxygen (Oβ) and a decrease in Mn^(4+)surface concentration,which improved the catalytic activity.In the results of hydrogen temperature-programmed reduction(H_(2)-TPR),the presence of Sm induced a higher reduction temperature and lower H_(2)consumption (0.3 mmol·g^(-1)) for the Sm_(0.15)Mn_(0.15)Ti catalyst compared to the Mn0.3Ti catalyst.The decrease in Mn^(4+)weakened the redox property of the catalysts and increased the N_(2)selectivity by suppressing N_(2)O formation from NH3oxidation and the nonselective catalytic reduction reaction.The in situ diffuse reflectance infrared Fourier transform spectra (DRIFTs) revealed that NH3-SCR of NO over the Sm_(0.15)Mn_(0.15)Ti catalyst mainly followed the Eley–Rideal mechanism.Sm doping increased surface-absorbed oxygen and weakened the redox property to improve the NO conversion and N_(2)selectivity of the Sm_(0.15)Mn_(0.15)Ti catalyst.展开更多
Ion-absorbed rare-earth ore is an important mineral resource which is widely extracted by in-situ leaching process. And such process generates a significant amount of impurities such as aluminum and iron ions in leach...Ion-absorbed rare-earth ore is an important mineral resource which is widely extracted by in-situ leaching process. And such process generates a significant amount of impurities such as aluminum and iron ions in leaching solution simultaneously. The surface characteristics and interactions by infrared spectroscopy and X-ray diffraction were studied to optimize the leaching conditions. It is found that the environment-friendly depressant LG-01 can react with the impurity ions through the formation of a new complex on the surface of leaching residues. Thus, it reduces significantly the concentration of impurity ions in leaching solution and improves the leaching rate of rare-earth ore. Moreover, a leaching rate of 95.6% and an impurity removal rate of 92% have been achieved under the optimized conditions.展开更多
The effects of rare earth samarium (Sm) additions on the microstructure and mechanical properties of as-cast Al-Si-Cu alloy were investigated by optical microscopy and scanning electron microscopy (SEM). The resul...The effects of rare earth samarium (Sm) additions on the microstructure and mechanical properties of as-cast Al-Si-Cu alloy were investigated by optical microscopy and scanning electron microscopy (SEM). The results show that Sm can effectively refine the a(Al) dendrite and the eutectic silicon. In addition, the shape of iron-rich phases changes from the Chinese script-like to slender-like ones and the volume fraction of iron-rich phases is decreased by the addition of Sm. Two kinds of Sm-rich interrnetallics are found: AlSiSm and AlSiCuSm. The plate-like AlSiCuSm phase always associates with the needle-like AISiSm phase. The mechanical properties are improved by the addition of Sm, and the good ultimate tensile strength (220 MPa) and elongation (3. 1%) are obtained from the Al-Si-Cu-1.0Sin alloy.展开更多
Rare-earth nickelates(RENiO_(3))show widely tunable metal-to-insulator transition(MIT)properties with ignorable variations in lattice constants and small latent heat across the critical temperature(TMIT).Particularly,...Rare-earth nickelates(RENiO_(3))show widely tunable metal-to-insulator transition(MIT)properties with ignorable variations in lattice constants and small latent heat across the critical temperature(TMIT).Particularly,it is worth noting that compared with the more commonly investigated vanadium oxides,the MIT of RENiO_(3)is less abrupt but usually across a wider range of temperatures.This sheds light on their alternative applications as negative temperature coefficient resistance(NTCR)thermistors with high sensitivity compared with the current NTCR thermistors,other than their expected use as critical temperature resistance thermistors.In this work,we demonstrate the NTCR thermistor functionality for using the adjustable MIT of Nd_(x)Sm_(1-x)NiO_(3)within 200–400 K,which displays larger magnitudes of NTCR(e.g.,more than 7%/K)that is unattainable in traditional NTCR thermistor materials.The temperature dependence of resistance(R–T)shows sharp variation during the MIT of Nd_(x)Sm_(1-x)NiO_(3)with no hysteresis via decreasing the Nd content(e.g.,x≤0.8),and such a R–T tendency can be linearized by introducing an optimum parallel resistor.The sensitive range of temperature can be further extended to 210–360 K by combining a series of Nd_(x)Sm_(1-x)NiO_(3)with eight rare-earth co-occupation ratios as an array,with a high magnitude of NTCR(e.g.,7%–14%/K)covering the entire range of temperatures.展开更多
Rare-earth silicates are promising environmental barrier coatings(EBCs)that can protect SiC_(f)/Si C_(m)substrates in next-genera tion gas turbine blades.Notably,RE_(2)Si_(2)O_(7)(RE=Yb and Ho)shows potential as an EB...Rare-earth silicates are promising environmental barrier coatings(EBCs)that can protect SiC_(f)/Si C_(m)substrates in next-genera tion gas turbine blades.Notably,RE_(2)Si_(2)O_(7)(RE=Yb and Ho)shows potential as an EBC due to its coefficient of thermal expansion(CTE)compatible with substrates and high resistance to water vapor corrosion.The target operating temperature for next-generation tur bine blades is 1400°C.Corrosion is inevitable during adhesion to molten volcanic ash,and thus,understanding the corrosion behavior o the material is crucial to its reliability.This study investigates the high-temperature corrosion behavior of sintered RE_(2)Si_(2)O_(7)(RE=Yb and Ho).Samples were prepared using a solid-state reaction and hot-press method.They were then exposed to volcanic ash at 1400°C for 224,and 48 h.After 48 h of exposure,volcanic ash did not react with Yb_(2)Si_(2)O_(7)but penetrated its interior,causing damage.Meanwhile Ho_(2)Si_(2)O_(7)was partially dissolved in the molten volcanic ash,forming a reaction zone that prevented volcanic ash melts from penetrating the interior.With increasing heat treatment time,the reaction zone expanded,and the thickness of the acicular apatite grains increased The Ca:Si ratios in the residual volcanic ash were mostly unchanged for Yb_(2)Si_(2)O_(7)but decreased considerably over time for Ho_(2)Si_(2)O_(7).Th Ca in volcanic ash was consumed and formed apatite,indicating that RE^(3+)ions with large ionic radii(Ho>Yb)easily precipitated apatit from the volcanic ash.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.21171018 and 51271021)the State Key Laboratory for Advanced Metals and Materials。
文摘This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),YGdTbDyHo.Results indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed homogeneously.Upon hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any secondary phase precipitated.The alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy could absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period observed.The reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral interstices.These results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.
基金Project supported by the National Natural Science Foundation of China(Nos.12302278,U2241267,12172155,and 11932008)the Fundamental Research Funds for the Central Universities of China(No.lzujbky-2022-48)the Natural Science Foundation of Gansu Province of China(No.24JRRA473)。
文摘High-temperature superconducting(HTS)rare-earth Ba_(2)Cu_(3)O_(7-x)(REBCO)coated conductors(CCs)have significant potential in high-current and high-field applications.However,owing to the weak interface strength of the laminated composite REBCO CCs,the damage induced by the thermal mismatch stress under a combination of epoxy impregnation,cooling,and quenching can cause premature degradation of the critical current.In this study,a three-dimensional(3D)electromagnetic-thermal-mechanical model based on the H-formulation and cohesive zone model(CZM)is developed to study the critical current degradation characteristics in an epoxy-impregnated REBCO CC caused by the damage during a quench.The temperature variation,critical current degradation of the REBCO CC,and its degradation onset temperature calculated by the numerical model are in agreement with the experimental data taken from the literature.The delamination of the REBCO CC predicted by the numerical model is consistent with the experimental result.The numerical results also indicate that the shear stress is the main contributor to the damage propagation inside the REBCO CC.The premature degradation of the critical current during a quench is closely related to the interface shear strength inside the REBCO CC.Finally,the effects of the coefficient of thermal expansion(CTE)of the epoxy resin,thickness of the substrate,and substrate material on the critical current degradation characteristics of the epoxy-impregnated REBCO CC during a quench are also discussed.These results help us understand the relationship between the current-carrying degradation and damage in the HTS applications.
基金supported by National Natural Science Foundation of China(21346006)National College Students' Innovation and Entrepreneurship Training Major Project(201310222013)+3 种基金the Department of Scientific Research Projects in Heilongjiang Province(B201015)Scientific Research Project in Heilongjiang Province’s Department of Education(125418211254178312543078)
文摘An inorganic nanomaterials combination of Sm, Ag, and TiO2 was synthesized using supercritical fluid drying (SCFD) combined with solgel techniques. The structure, photocatalysis and bacteriostatic activity of the materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XRPS), photocatalytic performance, and antibacterial activity experiments. The XRD results showed that the average particle diameter of Sm/Ag/TiO2 was 14.62 nm and Ag and Sm ions were dispersed on the surface of TiO2 in a highly dispersed, amorphous form. The TEM image showed that the size of the particle was 12 nm using the scherer formula. The XPS result showed that the element Sm was doped and Ag was loaded inorganic nanomaterials successfully. Sm/Ag/TiO2 exhibited optimal photocatalytic properties at 600 oC, the photocatalytic optimal proportion of Sm/Ag/TiO2 was 2:2:100. When the molar ratio was 2:2:100, the bacteriostatic circle diameter was 16 mm for Staphylococcus aureus, the minimum bacteriostatic concentration was 200μg/mL for white beads coccus, and the minimum bactericidal concentration was 2×10^4μg/mL for white beads coccus. The SEM results showed that the antibacterial material attached to the candida albicans cell surface, cells appeared fold deformation. Therefore the inorganic nanomaterials Sm/Ag/TiO2 had high temperature resistance, good photocatalytic and antibacterial characteristics in visible light.
基金supported by the National Natural Science Foundation of China(No.51975365)the Shanghai Pujiang Program(18PJ1405000)+1 种基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)the Province of Ontario
文摘To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.
基金sponsored by the National Key R&D Program of China(Nos.2021YFC1910504,2019YFC 1907101,and 2019YFC1907103)the Key R&D Program of Ningxia Hui Autonomous Region,China(Nos.2020BCE01001 and 2021BEG01003)+3 种基金the National Natural Science Foundation of China(Nos.U2002212,51672024,52102058,and 52204414)the Xijiang Innovation and Entrepreneurship Team(No.2017A0109004)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP20-097A1Z and FRF-TP-20-031A1)the Foshan Science and Technology Innovation Special Foundation(No.BK22BE001)。
文摘This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by co-precipitation.Activity tests indicated that the Sm_(0.15)Mn_(0.15)Ti catalyst showed superior performances,with a NO conversion of 100%and N_(2)selectivity above 87%at 180–300℃.The characterizations showed that Sm doping suppressed the crystallization of TiO_(2)and Mn2O3phases and increased the specific surface area and acidity.In particular,the surface area increased from 152.2 m^(2)·g^(-1)for Mn0.3Ti to 241.7 m^(2)·g^(-1)for Sm_(0.15)Mn_(0.15)Ti.These effects contributed to the high catalytic activity.The X-ray photoelectron spectroscopy (XPS) results indicated that the relative atomic ratios of Sm^(3+)/Sm and Oβ/O of Sm_(0.15)Mn_(0.15)Ti were 76.77at%and 44.11at%,respectively.The presence of Sm contributed to an increase in surface-absorbed oxygen (Oβ) and a decrease in Mn^(4+)surface concentration,which improved the catalytic activity.In the results of hydrogen temperature-programmed reduction(H_(2)-TPR),the presence of Sm induced a higher reduction temperature and lower H_(2)consumption (0.3 mmol·g^(-1)) for the Sm_(0.15)Mn_(0.15)Ti catalyst compared to the Mn0.3Ti catalyst.The decrease in Mn^(4+)weakened the redox property of the catalysts and increased the N_(2)selectivity by suppressing N_(2)O formation from NH3oxidation and the nonselective catalytic reduction reaction.The in situ diffuse reflectance infrared Fourier transform spectra (DRIFTs) revealed that NH3-SCR of NO over the Sm_(0.15)Mn_(0.15)Ti catalyst mainly followed the Eley–Rideal mechanism.Sm doping increased surface-absorbed oxygen and weakened the redox property to improve the NO conversion and N_(2)selectivity of the Sm_(0.15)Mn_(0.15)Ti catalyst.
基金Project(51164010)supported by the National Natural Science Foundation of ChinaProject(2010GZC0048)supported by the Natural Science Foundation of Jiangxi Province,China
文摘Ion-absorbed rare-earth ore is an important mineral resource which is widely extracted by in-situ leaching process. And such process generates a significant amount of impurities such as aluminum and iron ions in leaching solution simultaneously. The surface characteristics and interactions by infrared spectroscopy and X-ray diffraction were studied to optimize the leaching conditions. It is found that the environment-friendly depressant LG-01 can react with the impurity ions through the formation of a new complex on the surface of leaching residues. Thus, it reduces significantly the concentration of impurity ions in leaching solution and improves the leaching rate of rare-earth ore. Moreover, a leaching rate of 95.6% and an impurity removal rate of 92% have been achieved under the optimized conditions.
基金Project(51165032)supported by the National Natural Science Foundation of ChinaProject(20122BAB216017)supported by the Natural Science Foundation of Jiangxi Province,ChinaProject(2011-TW-03)supported by the Open Foundation of Jiangxi Key Laboratory for Advanced Copper and Tungsten Materials,China
文摘The effects of rare earth samarium (Sm) additions on the microstructure and mechanical properties of as-cast Al-Si-Cu alloy were investigated by optical microscopy and scanning electron microscopy (SEM). The results show that Sm can effectively refine the a(Al) dendrite and the eutectic silicon. In addition, the shape of iron-rich phases changes from the Chinese script-like to slender-like ones and the volume fraction of iron-rich phases is decreased by the addition of Sm. Two kinds of Sm-rich interrnetallics are found: AlSiSm and AlSiCuSm. The plate-like AlSiCuSm phase always associates with the needle-like AISiSm phase. The mechanical properties are improved by the addition of Sm, and the good ultimate tensile strength (220 MPa) and elongation (3. 1%) are obtained from the Al-Si-Cu-1.0Sin alloy.
基金the National Key Research and Development Program of China(No.2021YFA0718900)the National Natural Science Foundation of China(No.62074014)。
文摘Rare-earth nickelates(RENiO_(3))show widely tunable metal-to-insulator transition(MIT)properties with ignorable variations in lattice constants and small latent heat across the critical temperature(TMIT).Particularly,it is worth noting that compared with the more commonly investigated vanadium oxides,the MIT of RENiO_(3)is less abrupt but usually across a wider range of temperatures.This sheds light on their alternative applications as negative temperature coefficient resistance(NTCR)thermistors with high sensitivity compared with the current NTCR thermistors,other than their expected use as critical temperature resistance thermistors.In this work,we demonstrate the NTCR thermistor functionality for using the adjustable MIT of Nd_(x)Sm_(1-x)NiO_(3)within 200–400 K,which displays larger magnitudes of NTCR(e.g.,more than 7%/K)that is unattainable in traditional NTCR thermistor materials.The temperature dependence of resistance(R–T)shows sharp variation during the MIT of Nd_(x)Sm_(1-x)NiO_(3)with no hysteresis via decreasing the Nd content(e.g.,x≤0.8),and such a R–T tendency can be linearized by introducing an optimum parallel resistor.The sensitive range of temperature can be further extended to 210–360 K by combining a series of Nd_(x)Sm_(1-x)NiO_(3)with eight rare-earth co-occupation ratios as an array,with a high magnitude of NTCR(e.g.,7%–14%/K)covering the entire range of temperatures.
基金supported by JSPS KAKENHI(No.23K19087)“Dynamic Alliance for Open Innovation Bridging Human,Environment and Materials”from the Ministry of Education,Culture,Sports,Science and Technology o f Japan(MEXT).
文摘Rare-earth silicates are promising environmental barrier coatings(EBCs)that can protect SiC_(f)/Si C_(m)substrates in next-genera tion gas turbine blades.Notably,RE_(2)Si_(2)O_(7)(RE=Yb and Ho)shows potential as an EBC due to its coefficient of thermal expansion(CTE)compatible with substrates and high resistance to water vapor corrosion.The target operating temperature for next-generation tur bine blades is 1400°C.Corrosion is inevitable during adhesion to molten volcanic ash,and thus,understanding the corrosion behavior o the material is crucial to its reliability.This study investigates the high-temperature corrosion behavior of sintered RE_(2)Si_(2)O_(7)(RE=Yb and Ho).Samples were prepared using a solid-state reaction and hot-press method.They were then exposed to volcanic ash at 1400°C for 224,and 48 h.After 48 h of exposure,volcanic ash did not react with Yb_(2)Si_(2)O_(7)but penetrated its interior,causing damage.Meanwhile Ho_(2)Si_(2)O_(7)was partially dissolved in the molten volcanic ash,forming a reaction zone that prevented volcanic ash melts from penetrating the interior.With increasing heat treatment time,the reaction zone expanded,and the thickness of the acicular apatite grains increased The Ca:Si ratios in the residual volcanic ash were mostly unchanged for Yb_(2)Si_(2)O_(7)but decreased considerably over time for Ho_(2)Si_(2)O_(7).Th Ca in volcanic ash was consumed and formed apatite,indicating that RE^(3+)ions with large ionic radii(Ho>Yb)easily precipitated apatit from the volcanic ash.