A hybrid compensation scheme for piezoelectric ceramic actuators(PEAs)is proposed.In the hybrid compensation scheme,the input rate-dependent hysteresis characteristics of the PEAs are compensated.The feedforward contr...A hybrid compensation scheme for piezoelectric ceramic actuators(PEAs)is proposed.In the hybrid compensation scheme,the input rate-dependent hysteresis characteristics of the PEAs are compensated.The feedforward controller is a novel input rate-dependent neural network hysteresis inverse model,while the feedback controller is a proportion integration differentiation(PID)controller.In the proposed inverse model,an input ratedependent auxiliary inverse operator(RAIO)and output of the hysteresis construct the expanded input space(EIS)of the inverse model which transforms the hysteresis inverse with multi-valued mapping into single-valued mapping,and the wiping-out,rate-dependent and continuous properties of the RAIO are analyzed in theories.Based on the EIS method,a hysteresis neural network inverse model,namely the dynamic back propagation neural network(DBPNN)model,is established.Moreover,a hybrid compensation scheme for the PEAs is designed to compensate for the hysteresis.Finally,the proposed method,the conventional PID controller and the hybrid controller with the modified input rate-dependent Prandtl-Ishlinskii(MRPI)model are all applied in the experimental platform.Experimental results show that the proposed method has obvious superiorities in the performance of the system.展开更多
A rate-dependent constitutive model for saturated frozen soil is vital in frozen soil mechanics,especially when simultaneously describing the nonlinearity,dilatancy and strain-softening characteristics.The distributio...A rate-dependent constitutive model for saturated frozen soil is vital in frozen soil mechanics,especially when simultaneously describing the nonlinearity,dilatancy and strain-softening characteristics.The distribution of the non-uniform strain rate of saturated frozen soil at the meso-scale due to the local icecementation breakage is described by a newly binary-medium-based homogenization equation.Based on the field-equation-based approach of the meso-mechanics theory,the interaction expression of the strain rate at macro-and meso-scale is derived,which can give the strain rate concentration tensor at different crushed degrees.With the thermodynamics and empirical assumption,a breakage ratio in the rate-dependent form is determined.This overcomes the limitations of the existing binary-medium-based models that are difficult to simulate rate-dependent mechanical response.Based on these assumptions,a newly binary-medium-based rate-dependent model is proposed considering both the ice bond breakage and material composition characteristics of saturated frozen soil.The proposed constitutive model has been validated by the test results on frozen soils with different temperatures and strain rates.展开更多
The nonproportional multiaxial ratchetting of cast AZ91 magnesium (Mg) alloy was examined by performing a sequence of axial-torsional cyclic tests controlled by stress with various loading paths at room temperature (R...The nonproportional multiaxial ratchetting of cast AZ91 magnesium (Mg) alloy was examined by performing a sequence of axial-torsional cyclic tests controlled by stress with various loading paths at room temperature (RT).The evolutionary characteristics and path dependence of multiaxial ratchetting were discussed.Results illustrate that the cast AZ91 Mg alloy exhibits considerable nonproportional additional softening during cyclic loading with multiple nonproportional multiaxial loading paths;multiaxial ratchetting presents strong path dependence,and axial ratchetting strains are larger under nonproportional loading paths than under uniaxial and proportional45°linear loading paths;multiaxial ratchetting becomes increasingly pronounced as the applied stress amplitude and axial mean stress increase.Moreover,stress-strain curves show a convex and symmetrical shape in axial/torsional directions.Multiaxial ratchetting exhibits quasi-shakedown after certain loading cycles.The abundant experimental data obtained in this work can be used to develop a cyclic plasticity model of cast Mg alloys.展开更多
This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The frac...This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The fractional(fractional-order)derivative is an efficient tool for modeling these phenomena. Therefore, we develop a cyclic fractional-order unified visco-plastic(FVP) constitutive model. Specifically, within the framework of the cyclic elasto-plastic theory, the fractional derivative is used to describe the accumulated plastic strain rate and nonlinear kinematic hardening rule based on the Ohno-Abdel-Karim model. Moreover, a new radial return method for the back stress is developed to describe the unclosed hysteresis loops of the stress-strain properly.The capacity of the FVP model used to predict the cyclic deformation of the SS304 stainless steel is verified through a comparison with the corresponding experimental data found in the literature(KANG, G. Z., KAN, Q. H., ZHANG, J., and SUN, Y. F. Timedependent ratcheting experiments of SS304 stainless steel. International Journal of Plasticity, 22(5), 858–894(2006)). The FVP model is shown to be successful in predicting the rate-dependent ratcheting behaviors of the SS304 stainless steel.展开更多
An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched ...An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled circular load path. The ratcheting was investigated for the stress-controlled multiaxial circular, elliptical and rhombic load paths with different mean stresses, stress amplitudes and their histories. The experiment shows that U71Mn rail steel features the cyclic non-hardening/softening, and its strain cyclic characteristics depend greatly on the strain amplitude but slightly on its history. However, the ratcheting of U71Mn rail steel depends greatly not only on the values of mean stress and stress amplitude, but also on their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting. The ratcheting changes with the different loading paths.展开更多
Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room a...Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room and elevated temperatures within the framework of unified visco-plasticity. In the model, the temperature dependence of the ratcheting was emphasized, and the dynamic strain aging occurred in the temperature range of 4 00-600℃ for the material was taken into account particularly. Finally, the prediction capability of the developed model was checked by comparing to the corresponding experimental results.展开更多
The uniaxial time-dependent strain cyclic behaviors and ratcheting of SS304 stainless steel were studied at high temperatures （350 ℃ and 700 ℃）. The effects of straining and stressing rates, holding time at the pe...The uniaxial time-dependent strain cyclic behaviors and ratcheting of SS304 stainless steel were studied at high temperatures （350 ℃ and 700 ℃）. The effects of straining and stressing rates, holding time at the peak and/or valley of each cycle in addition to ambient temperature on the cyclic softening/hardening behavior and ratcheting of the material were discussed. It can be seen from experimental results that the material presents remarkable time dependence at 700 ℃, and the ratcheting strain depends greatly on the stressing rate, holding time and ambient temperature. Some significant conclusions are obtained, which are useful to build a constitutive model describiog the time-dependent cyclic deformation of the material.展开更多
In order to investigate the ratcheting behavior of T225NG alloy, a series of ratcheting tests under uniaxial long-cyclic stressing were performed. The results show that the ratcheting strain of this alloy can get into...In order to investigate the ratcheting behavior of T225NG alloy, a series of ratcheting tests under uniaxial long-cyclic stressing were performed. The results show that the ratcheting strain of this alloy can get into shakedown after tens （or hundreds） of thousand cycles. After the ratcheting strain is saturated under the condition that stress amplitude is half of peak stress, it will bring about subsequent fatigue failure, and relationship between fatigue life and one of peak stress and saturated ratcheting （SR） strain meets power law. As the alloy is under stress jiggling with stress amplitude that is 1%-2.5% of peak stress, the ratcheting strain still become remarkable and goes into shakedown after several hundreds of thousand cycles but there exists little accessional strain caused by creep effect. It is notable that, when the peak stress is 85%-100% of yield stress, the long-cyclic stressing will lead SR strain to be from 1.4% to 2.5% even if the initial ratio of ratcheting strain is zero. Based on ratcheting threshold property of peak stress and monotonicity of relationship between the peak stress and SR strain, a saturated ratcheting model （SRM） is developed to predict SR strain and to estimate saturated creep strain also. In addition, the classes of ratcheting evolutions of metals are discussed.展开更多
An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on ...An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on the strain cyclic characteristics were studied.Under the asymmetrical stress cycling, the effects of stress amplitude, mean stress,stress loading rate and their histories on the ratcheting were analyzed. The interaction between strain cycling and stress cycling was also discussed. It is shown that either the cyclic characteristics under strain cycling or the ratcheting under asymmetrical stress cycling depends not only on the cumnt loading state, but also on the previous loading history. Some significant results are obtained.展开更多
In this study,a new bond-based peridynamic model is proposed to describe the dynamic properties of ceramics under impact loading.Ceramic materials show pseudo-plastic behavior under certain compressive loadings with h...In this study,a new bond-based peridynamic model is proposed to describe the dynamic properties of ceramics under impact loading.Ceramic materials show pseudo-plastic behavior under certain compressive loadings with high strain-rate,while the characteristic brittleness of the material dominates when it is subjected to tensile loading.In this model,brittle response under tension,softening plasticity under compression and strain-rate effect of ceramics are considered,which makes it possible to accurately capture the overall dynamic process of ceramics.This enables the investigation of the fracture mechanism for ceramic materials,during ballistic impact,in more detail.Furthermore,a bond-force updating algorithm is introduced to perform the numerical simulation and solve the derived equations.The proposed model is then used to analyze the dynamic response of ceramics tiles under impact loading to assess its validity.The results of damage development in ceramic materials are calculated and compared with the experimental results.The simulation results are consistent with the experiments,which indicates that the proposed rate-dependent peridynamic model has the capability to describe damage propagation in ceramics with good accuracy.Finally,based on a comparison between simulation and experimental results,it can be concluded that the damage results are in better agreement with experimental results than non-ordinary state-based peridynamic method.展开更多
Because of the size limitation of weld joints in different regions, the traditional standard bar specimen is not suitable to investigate the mechanical properties of weld joints. In this study, miniature specimens wer...Because of the size limitation of weld joints in different regions, the traditional standard bar specimen is not suitable to investigate the mechanical properties of weld joints. In this study, miniature specimens were extracted from specific regions(base metal, weld metal, and three heat-affected zones) of API X80 and X70 weld joints. Uniaxial tensile tests were conducted to obtain the mechanical properties of different regions, and then uniaxial ratcheting tests were conducted to investigate the ratcheting behaviors of the different regions under the same peak and nominal stresses. Under both the tensile tests and ratcheting tests, the weld joints exhibit heterogeneous results, such as different mechanical properties and ratcheting behaviors, which were region dependent. Furthermore, the yield strength and yield-to-tensile strength ratio contribute differently to the ratcheting response.展开更多
The behavior of rolling contact fatigue (RCF) of medium carbon bainitic back-up roll steel was investigated under its actual work conditions. A kind of asperity-scale surface originated cracks, which is lying parallel...The behavior of rolling contact fatigue (RCF) of medium carbon bainitic back-up roll steel was investigated under its actual work conditions. A kind of asperity-scale surface originated cracks, which is lying parallel or at an acute angle to the surfaces, initiated after unidirectional plastic flow of the material in thin surface layer had occurred. Theoretical analysis indicates that they nucleate due to plastic ratcheting induced by asperity contact stresses, and consequently are named as ratcheting cracks. After nucleating and initially propagating, they arrest at some depth and resume propagating till about 70%-80% of the RCF failure life by initially turning parallel to contact surfaces. Their behavior of initiation and propagation is confined to a thin layer prior to the formation of surface distress. According to the critical principle of the preventive grinding strategy, removing the asperity influenced surface layer at about 70%-80% of the RCF failure life can effectively prevent the ratcheting cracks from developing into surface distress, which can lead to the formation of macro-RCF failure soon.展开更多
To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The tem...To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The temperature evolutions during static and cyclic loadings were both measured by infrared thermography.Fatigue tests show that the temperature evolution was closely related to the cyclic loading,and the cyclic loading range can be divided into three sections according to the regular of temperature evolution in different section.The mechanism of temperature evolution under different cyclic loadings was also analyzed due to the thermoelastic,viscous,and thermoplastic effects.Additionally,ratcheting strain under cyclic loading was also measured,and the results show that the evolution of the ratcheting strain under cyclic loading above the fatigue limit undergone three stages:the first increasing stage,the second steady state,and the final abrupt increase stage.The fatigue limit of the 6061 aluminum alloy was quickly estimated based on transition point of linear fitting of temperature increase and the steady value of ratcheting strain difference.Besides,it is feasible and quick of the two methods by the proof of the traditional S-N curve.展开更多
Updating parameters according to the driving rate of input, the rate-dependent Prandtl-Ishlinskii （PI） model is widely used in hysteresis modeling and compensation. In order to improve the modeling accuracy, two PI ...Updating parameters according to the driving rate of input, the rate-dependent Prandtl-Ishlinskii （PI） model is widely used in hysteresis modeling and compensation. In order to improve the modeling accuracy, two PI models identified at low and high driving rates separately are incorporated through a combination law. For the piezo- driven flexure-based mechanism, the very low damping ratio makes it easy to excite the structural vibration. As a re- suit, the measured hysteresis loop is greatly distorted and the modeling accuracy of the identified P1 model is signifi- cantly affected. In this paper, a novel time-efficient parameter identification method which utilizes the superimposed sinusoidal signals as the control input is proposed. This method effectively avoids the excitation of the structural vibra- tion. In addition, as the driving rate of the superimposed sinusoidal signals covers a wide range, all the coefficients required for modeling the rate-dependence can be identified through only one set of experimental data. Hysteresis modeling and trajectory tracking experiments were performed on a 2-DOF piezo-driven flexure-based mechanism. The experimental results show that the combined hysteresis model maintains the modeling accuracy over the entire work- ing range of the flexure-based mechanism. The mechanism＇s hysteresis is significantly suppressed by the use of the inverse PI model as the feedforward controller; and better result is achieved when a feedback loop is also incorporated. The tracking performance of the flexure-based mechanism is greatly improved.展开更多
Rock blocks sliding along discontinuities can cause serious disasters,such as landslides,earthquakes,or rock bursts.The shear rate-dependent behavior is a typical time-dependent behavior of a rock discontinuity,and it...Rock blocks sliding along discontinuities can cause serious disasters,such as landslides,earthquakes,or rock bursts.The shear rate-dependent behavior is a typical time-dependent behavior of a rock discontinuity,and it is closely related to the stability of a rock block.To further study the shear rate-dependent behavior of rock discontinuities,shear tests with alternating shear rates(SASRs)were conducted on rock discontinuities with various surface morphologies.The dynamic evolution of the shear rate dependency was studied in detail based on the shear test results,and three stages were identified with respect to the shear stress and shear deformation states.The test results revealed that dynamic changes in shear stiffness and the energy storage abilities of the rock discontinuities occurred in relation to the shear rate-dependent behavior of crack growth,which increased with an increase in normal stress and/or the joint roughness coefficient.The stage of decreasing shear stiffness corresponded to a stage of noticeable shear rate-dependency,and the shear rate was found to have no influence on the initial crack stress.展开更多
An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched ...An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled uniaxial tension-compression and multiaxial circular paths of loading. The ratcheting tests were conducted for the stress-controlled uniaxial tension-compression and multiaxial circular, rhombic and linear paths of loading with different mean stresses, stress amplitudes and histories. The experiment results show that 316L stainless steel features the cyclic hardening, and its strain cyclic characteristics depend on the strain amplitude and its history apparently. The ratcheting of 316L stainless steel depends greatly on the Values of mean stress, stress amplitude and their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting.展开更多
Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow ...Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow liquids with different surface tensions to select their spreading directions on a same surface composed of macro ratchets with dual reentrant curvatures. Nevertheless, such intriguing directional steering function relies on 3D printed sophisticated structures and additional polishing process to eliminate the inevitable microgrooves-like surface deficiency generated from printing process, which increases the manufacturing complexity and severally hinders practical applications. Herein, we developed a simplified dual-scale structure that enables directional liquid steering via a straightforward 3D printing process without the need of any physical and chemical post-treatment. The dual-scale structure consists of macroscale tilt ratchet equipped with a reentrant tip and microscale grooves that decorated on the whole surface along a specific orientation. Distinct from conventional design requiring the elimination of microgrooves-like surface deficiency, we demonstrated that the microgrooves of dual-scale structure play a key role in delaying or promoting the local flow of liquids, tuning of which could even enable liquids select different spreading pathways. This study provides a new insight for developing surfaces with tunable multi-scale structures, and also advances our fundamental understanding of the interaction between liquid spreading dynamics and surface topography.展开更多
The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deform...The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deformation mechanisms.Different stress levels are prescribed to reflect the cyclic plasticity of the alloy controlled by diverse deformation mechanisms(i.e.,dislocation slipping,deformation twinning and detwinning ones),and then the influences of stress level and stress rate on the ratchetting and fatigue life are discussed.The experimental results demonstrate that different evolution characteristics of whole-life ratchetting and fatigue life presented during cyclic tests with various mean stresses,stress amplitudes and stress rates are determined by the dominated plastic deformation mechanisms.It’s worth noting that the ratchetting can occur in the compressive direction even in the cyclic tests with a positive(tensile)mean stress,and the fatigue life increases first and then decreases with the increase of mean stress on account of the interaction between dislocation slipping and twinning/detwinning mechanisms.Comparing the fatigue lives obtained in the asymmetric stress-controlled and symmetrical strain-controlled cycle tests,it is seen that the ratchetting deformation causes an additional damage,and then leads to a shortening of fatigue life.展开更多
A rate-dependent peridynamic ceramic model,considering the brittle tensile response,compressive plastic softening and strain-rate dependence,can accurately represent the dynamic response and crack propagation of ceram...A rate-dependent peridynamic ceramic model,considering the brittle tensile response,compressive plastic softening and strain-rate dependence,can accurately represent the dynamic response and crack propagation of ceramic materials.However,it also considers the strain-rate dependence and damage accumulation caused by compressive plastic softening during the compression stage,requiring more computational resources for the bond force evaluation and damage evolution.Herein,the OpenMP parallel optimization of the rate-dependent peridynamic ceramicmodel is investigated.Also,themodules that compute the interactions betweenmaterial points and update damage index are vectorized and parallelized.Moreover,the numerical examples are carried out to simulate the dynamic response and fracture of the ceramic plate under normal impact.Furthermore,the speed-up ratio and computational efficiency by multi-threads are evaluated and discussed to demonstrate the reliability of parallelized programs.The results reveal that the totalwall clock time has been significantly reduced after optimization,showing the promise of parallelization process in terms of accuracy and stability.展开更多
A series of fully reversed axial, torsional strain-controlled cyclic tests and two multiaxial ratcheting tests were conducted on weld metal specimens using an Instron8521 tension-torsional servo-controlled testing mac...A series of fully reversed axial, torsional strain-controlled cyclic tests and two multiaxial ratcheting tests were conducted on weld metal specimens using an Instron8521 tension-torsional servo-controlled testing machine. The weld metal showed clear cyclic softening under axial, torsional and multiaxial loading. A modified kinematic hardening rule was proposed in which a multiaxial-loading-dependent parameter incorporated the radial evanescence term of the Burlet-Cailletaud mode with the Ohno-Wang kinematic hardening rule to predict the multiaxial ratcheting effects. The introduction of yield stress evolved with accumulated plasticity strain enables the model to predict cyclic plasticity behavior of cyclic softening or cyclic hardening materials. Thus modified model considers the isotropic hardening as well as kinematic hardening of yield surface, and it can present description of plasticity behavior and ratcheting of cyclic softening and cyclic hardening materials well under multiaxial loading.展开更多
基金National Natural Science Foundation of China(Nos.62171285,61971120 and 62327807)。
文摘A hybrid compensation scheme for piezoelectric ceramic actuators(PEAs)is proposed.In the hybrid compensation scheme,the input rate-dependent hysteresis characteristics of the PEAs are compensated.The feedforward controller is a novel input rate-dependent neural network hysteresis inverse model,while the feedback controller is a proportion integration differentiation(PID)controller.In the proposed inverse model,an input ratedependent auxiliary inverse operator(RAIO)and output of the hysteresis construct the expanded input space(EIS)of the inverse model which transforms the hysteresis inverse with multi-valued mapping into single-valued mapping,and the wiping-out,rate-dependent and continuous properties of the RAIO are analyzed in theories.Based on the EIS method,a hysteresis neural network inverse model,namely the dynamic back propagation neural network(DBPNN)model,is established.Moreover,a hybrid compensation scheme for the PEAs is designed to compensate for the hysteresis.Finally,the proposed method,the conventional PID controller and the hybrid controller with the modified input rate-dependent Prandtl-Ishlinskii(MRPI)model are all applied in the experimental platform.Experimental results show that the proposed method has obvious superiorities in the performance of the system.
文摘A rate-dependent constitutive model for saturated frozen soil is vital in frozen soil mechanics,especially when simultaneously describing the nonlinearity,dilatancy and strain-softening characteristics.The distribution of the non-uniform strain rate of saturated frozen soil at the meso-scale due to the local icecementation breakage is described by a newly binary-medium-based homogenization equation.Based on the field-equation-based approach of the meso-mechanics theory,the interaction expression of the strain rate at macro-and meso-scale is derived,which can give the strain rate concentration tensor at different crushed degrees.With the thermodynamics and empirical assumption,a breakage ratio in the rate-dependent form is determined.This overcomes the limitations of the existing binary-medium-based models that are difficult to simulate rate-dependent mechanical response.Based on these assumptions,a newly binary-medium-based rate-dependent model is proposed considering both the ice bond breakage and material composition characteristics of saturated frozen soil.The proposed constitutive model has been validated by the test results on frozen soils with different temperatures and strain rates.
基金financially supported by the National Natural Science Foundation of China(Nos.12192210 and12192214)the Independent Project of State Key Laboratory of Traction Power(No.2022TPL-T05)。
文摘The nonproportional multiaxial ratchetting of cast AZ91 magnesium (Mg) alloy was examined by performing a sequence of axial-torsional cyclic tests controlled by stress with various loading paths at room temperature (RT).The evolutionary characteristics and path dependence of multiaxial ratchetting were discussed.Results illustrate that the cast AZ91 Mg alloy exhibits considerable nonproportional additional softening during cyclic loading with multiple nonproportional multiaxial loading paths;multiaxial ratchetting presents strong path dependence,and axial ratchetting strains are larger under nonproportional loading paths than under uniaxial and proportional45°linear loading paths;multiaxial ratchetting becomes increasingly pronounced as the applied stress amplitude and axial mean stress increase.Moreover,stress-strain curves show a convex and symmetrical shape in axial/torsional directions.Multiaxial ratchetting exhibits quasi-shakedown after certain loading cycles.The abundant experimental data obtained in this work can be used to develop a cyclic plasticity model of cast Mg alloys.
基金Project supported by the National Natural Science Foundation of China(Nos.11790282,U1534204,and 11472179)the Natural Science Foundation of Hebei Province of China(No.A2016210099)
文摘This paper proposes a novel unified visco-plastic constitutive model for uniaxial ratcheting behaviors. The cyclic deformation of the material presents remarkable time-dependence and history memory phenomena. The fractional(fractional-order)derivative is an efficient tool for modeling these phenomena. Therefore, we develop a cyclic fractional-order unified visco-plastic(FVP) constitutive model. Specifically, within the framework of the cyclic elasto-plastic theory, the fractional derivative is used to describe the accumulated plastic strain rate and nonlinear kinematic hardening rule based on the Ohno-Abdel-Karim model. Moreover, a new radial return method for the back stress is developed to describe the unclosed hysteresis loops of the stress-strain properly.The capacity of the FVP model used to predict the cyclic deformation of the SS304 stainless steel is verified through a comparison with the corresponding experimental data found in the literature(KANG, G. Z., KAN, Q. H., ZHANG, J., and SUN, Y. F. Timedependent ratcheting experiments of SS304 stainless steel. International Journal of Plasticity, 22(5), 858–894(2006)). The FVP model is shown to be successful in predicting the rate-dependent ratcheting behaviors of the SS304 stainless steel.
基金Financially supported by the National Natural Science Foundation of China(197T2041)the Excellent Youth Fund of Sichuan Province.
文摘An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled circular load path. The ratcheting was investigated for the stress-controlled multiaxial circular, elliptical and rhombic load paths with different mean stresses, stress amplitudes and their histories. The experiment shows that U71Mn rail steel features the cyclic non-hardening/softening, and its strain cyclic characteristics depend greatly on the strain amplitude but slightly on its history. However, the ratcheting of U71Mn rail steel depends greatly not only on the values of mean stress and stress amplitude, but also on their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting. The ratcheting changes with the different loading paths.
基金supported by the Theoretical Research Fund of Sichuan Province(No.03JY029-062-2)the Scientific Research Foundation for the Returned Overseas Chinese Scholars(SRF-ROCS),State Education Ministry of China(No.2003-406-01).
文摘Based on the experimental results of the ratcheting for SS304 stainless steel, a new visco-plastic cyclic constitutive model was established to describe the uniaxial and multiaxial ratcheting of the material at room and elevated temperatures within the framework of unified visco-plasticity. In the model, the temperature dependence of the ratcheting was emphasized, and the dynamic strain aging occurred in the temperature range of 4 00-600℃ for the material was taken into account particularly. Finally, the prediction capability of the developed model was checked by comparing to the corresponding experimental results.
基金Item Sponsored by National Natural Science Foundation of China (NSFC10402037) Theoretical Research Fund of SouthwestJiaotong University (2005XJB23)
文摘The uniaxial time-dependent strain cyclic behaviors and ratcheting of SS304 stainless steel were studied at high temperatures （350 ℃ and 700 ℃）. The effects of straining and stressing rates, holding time at the peak and/or valley of each cycle in addition to ambient temperature on the cyclic softening/hardening behavior and ratcheting of the material were discussed. It can be seen from experimental results that the material presents remarkable time dependence at 700 ℃, and the ratcheting strain depends greatly on the stressing rate, holding time and ambient temperature. Some significant conclusions are obtained, which are useful to build a constitutive model describiog the time-dependent cyclic deformation of the material.
文摘In order to investigate the ratcheting behavior of T225NG alloy, a series of ratcheting tests under uniaxial long-cyclic stressing were performed. The results show that the ratcheting strain of this alloy can get into shakedown after tens （or hundreds） of thousand cycles. After the ratcheting strain is saturated under the condition that stress amplitude is half of peak stress, it will bring about subsequent fatigue failure, and relationship between fatigue life and one of peak stress and saturated ratcheting （SR） strain meets power law. As the alloy is under stress jiggling with stress amplitude that is 1%-2.5% of peak stress, the ratcheting strain still become remarkable and goes into shakedown after several hundreds of thousand cycles but there exists little accessional strain caused by creep effect. It is notable that, when the peak stress is 85%-100% of yield stress, the long-cyclic stressing will lead SR strain to be from 1.4% to 2.5% even if the initial ratio of ratcheting strain is zero. Based on ratcheting threshold property of peak stress and monotonicity of relationship between the peak stress and SR strain, a saturated ratcheting model （SRM） is developed to predict SR strain and to estimate saturated creep strain also. In addition, the classes of ratcheting evolutions of metals are discussed.
文摘An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on the strain cyclic characteristics were studied.Under the asymmetrical stress cycling, the effects of stress amplitude, mean stress,stress loading rate and their histories on the ratcheting were analyzed. The interaction between strain cycling and stress cycling was also discussed. It is shown that either the cyclic characteristics under strain cycling or the ratcheting under asymmetrical stress cycling depends not only on the cumnt loading state, but also on the previous loading history. Some significant results are obtained.
基金supported by the National Natural Science Foundation of China(Nos.11972267 and 11802214)the Fundamental Research Funds for the Central Universities(WUT:2018IB006 and WUT:2019IVB042).
文摘In this study,a new bond-based peridynamic model is proposed to describe the dynamic properties of ceramics under impact loading.Ceramic materials show pseudo-plastic behavior under certain compressive loadings with high strain-rate,while the characteristic brittleness of the material dominates when it is subjected to tensile loading.In this model,brittle response under tension,softening plasticity under compression and strain-rate effect of ceramics are considered,which makes it possible to accurately capture the overall dynamic process of ceramics.This enables the investigation of the fracture mechanism for ceramic materials,during ballistic impact,in more detail.Furthermore,a bond-force updating algorithm is introduced to perform the numerical simulation and solve the derived equations.The proposed model is then used to analyze the dynamic response of ceramics tiles under impact loading to assess its validity.The results of damage development in ceramic materials are calculated and compared with the experimental results.The simulation results are consistent with the experiments,which indicates that the proposed rate-dependent peridynamic model has the capability to describe damage propagation in ceramics with good accuracy.Finally,based on a comparison between simulation and experimental results,it can be concluded that the damage results are in better agreement with experimental results than non-ordinary state-based peridynamic method.
基金supported by the National Natural Science Foundation of China (No. 51435012)
文摘Because of the size limitation of weld joints in different regions, the traditional standard bar specimen is not suitable to investigate the mechanical properties of weld joints. In this study, miniature specimens were extracted from specific regions(base metal, weld metal, and three heat-affected zones) of API X80 and X70 weld joints. Uniaxial tensile tests were conducted to obtain the mechanical properties of different regions, and then uniaxial ratcheting tests were conducted to investigate the ratcheting behaviors of the different regions under the same peak and nominal stresses. Under both the tensile tests and ratcheting tests, the weld joints exhibit heterogeneous results, such as different mechanical properties and ratcheting behaviors, which were region dependent. Furthermore, the yield strength and yield-to-tensile strength ratio contribute differently to the ratcheting response.
文摘The behavior of rolling contact fatigue (RCF) of medium carbon bainitic back-up roll steel was investigated under its actual work conditions. A kind of asperity-scale surface originated cracks, which is lying parallel or at an acute angle to the surfaces, initiated after unidirectional plastic flow of the material in thin surface layer had occurred. Theoretical analysis indicates that they nucleate due to plastic ratcheting induced by asperity contact stresses, and consequently are named as ratcheting cracks. After nucleating and initially propagating, they arrest at some depth and resume propagating till about 70%-80% of the RCF failure life by initially turning parallel to contact surfaces. Their behavior of initiation and propagation is confined to a thin layer prior to the formation of surface distress. According to the critical principle of the preventive grinding strategy, removing the asperity influenced surface layer at about 70%-80% of the RCF failure life can effectively prevent the ratcheting cracks from developing into surface distress, which can lead to the formation of macro-RCF failure soon.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51505322 and 51775366)the Natural Science Foundation of Shanxi Province,China(No.201801D221137).
文摘To quickly predict the fatigue limit of 6061 aluminum alloy,two assessment methods based on the temperature evolution and the steady ratcheting strain difference under cyclic loading,respectively,were proposed.The temperature evolutions during static and cyclic loadings were both measured by infrared thermography.Fatigue tests show that the temperature evolution was closely related to the cyclic loading,and the cyclic loading range can be divided into three sections according to the regular of temperature evolution in different section.The mechanism of temperature evolution under different cyclic loadings was also analyzed due to the thermoelastic,viscous,and thermoplastic effects.Additionally,ratcheting strain under cyclic loading was also measured,and the results show that the evolution of the ratcheting strain under cyclic loading above the fatigue limit undergone three stages:the first increasing stage,the second steady state,and the final abrupt increase stage.The fatigue limit of the 6061 aluminum alloy was quickly estimated based on transition point of linear fitting of temperature increase and the steady value of ratcheting strain difference.Besides,it is feasible and quick of the two methods by the proof of the traditional S-N curve.
基金Supported by National Natural Science Foundation of China (No. 51175372)National Key Special Project of Science and Technology of China (No. 2011ZX04016-011)
文摘Updating parameters according to the driving rate of input, the rate-dependent Prandtl-Ishlinskii （PI） model is widely used in hysteresis modeling and compensation. In order to improve the modeling accuracy, two PI models identified at low and high driving rates separately are incorporated through a combination law. For the piezo- driven flexure-based mechanism, the very low damping ratio makes it easy to excite the structural vibration. As a re- suit, the measured hysteresis loop is greatly distorted and the modeling accuracy of the identified P1 model is signifi- cantly affected. In this paper, a novel time-efficient parameter identification method which utilizes the superimposed sinusoidal signals as the control input is proposed. This method effectively avoids the excitation of the structural vibra- tion. In addition, as the driving rate of the superimposed sinusoidal signals covers a wide range, all the coefficients required for modeling the rate-dependence can be identified through only one set of experimental data. Hysteresis modeling and trajectory tracking experiments were performed on a 2-DOF piezo-driven flexure-based mechanism. The experimental results show that the combined hysteresis model maintains the modeling accuracy over the entire work- ing range of the flexure-based mechanism. The mechanism＇s hysteresis is significantly suppressed by the use of the inverse PI model as the feedforward controller; and better result is achieved when a feedback loop is also incorporated. The tracking performance of the flexure-based mechanism is greatly improved.
基金Projects(42002266,51908288)supported by the National Natural Science Foundation of ChinaProject(2020M673654)supported by the Chinese Postdoctoral Science FoundationProject(2019K284)supported by Jiangsu Post-doctoral Research Funding Program,China。
文摘Rock blocks sliding along discontinuities can cause serious disasters,such as landslides,earthquakes,or rock bursts.The shear rate-dependent behavior is a typical time-dependent behavior of a rock discontinuity,and it is closely related to the stability of a rock block.To further study the shear rate-dependent behavior of rock discontinuities,shear tests with alternating shear rates(SASRs)were conducted on rock discontinuities with various surface morphologies.The dynamic evolution of the shear rate dependency was studied in detail based on the shear test results,and three stages were identified with respect to the shear stress and shear deformation states.The test results revealed that dynamic changes in shear stiffness and the energy storage abilities of the rock discontinuities occurred in relation to the shear rate-dependent behavior of crack growth,which increased with an increase in normal stress and/or the joint roughness coefficient.The stage of decreasing shear stiffness corresponded to a stage of noticeable shear rate-dependency,and the shear rate was found to have no influence on the initial crack stress.
文摘An experimental study was carried out on the strain cyclic characteristics and ratcheting of 316L stainless steel subjected to uniaxial and multiaxial cyclic loading. The strain cyclic characteristics were researched under the strain-controlled uniaxial tension-compression and multiaxial circular paths of loading. The ratcheting tests were conducted for the stress-controlled uniaxial tension-compression and multiaxial circular, rhombic and linear paths of loading with different mean stresses, stress amplitudes and histories. The experiment results show that 316L stainless steel features the cyclic hardening, and its strain cyclic characteristics depend on the strain amplitude and its history apparently. The ratcheting of 316L stainless steel depends greatly on the Values of mean stress, stress amplitude and their histories. In the meantime, the shape of load path and its history also apparently influence the ratcheting.
基金financial support from the ITF(GHP/021/19SZ)Shenzhen Science and Technology Innovation Council (9240061 and JCYJ20200109143206663)+3 种基金National Natural Science Foundation of China (No.51975502)Research Grants Council of Hong Kong(No. C1006-20WF, No. 11213320)Science and Technology Planning Project of Guangdong Province (No.2021A0505110002)Shenzhen-Hong Kong Joint Innovation Project (No. SGDX2019091716460172)。
文摘Achieving well-controlled directional steering of liquids is of great significance for both fundamental study and practical applications, such as microfluidics, biomedicine, and heat management. Recent advances allow liquids with different surface tensions to select their spreading directions on a same surface composed of macro ratchets with dual reentrant curvatures. Nevertheless, such intriguing directional steering function relies on 3D printed sophisticated structures and additional polishing process to eliminate the inevitable microgrooves-like surface deficiency generated from printing process, which increases the manufacturing complexity and severally hinders practical applications. Herein, we developed a simplified dual-scale structure that enables directional liquid steering via a straightforward 3D printing process without the need of any physical and chemical post-treatment. The dual-scale structure consists of macroscale tilt ratchet equipped with a reentrant tip and microscale grooves that decorated on the whole surface along a specific orientation. Distinct from conventional design requiring the elimination of microgrooves-like surface deficiency, we demonstrated that the microgrooves of dual-scale structure play a key role in delaying or promoting the local flow of liquids, tuning of which could even enable liquids select different spreading pathways. This study provides a new insight for developing surfaces with tunable multi-scale structures, and also advances our fundamental understanding of the interaction between liquid spreading dynamics and surface topography.
基金Financial support from National Natural Science Foundation of China(11532010)。
文摘The uniaxial ratchetting-fatigue interaction of extruded AZ31 magnesium(Mg)alloy is investigated by uniaxial stress-controlled cyclic tests at room temperature and with addressing the roles of different plastic deformation mechanisms.Different stress levels are prescribed to reflect the cyclic plasticity of the alloy controlled by diverse deformation mechanisms(i.e.,dislocation slipping,deformation twinning and detwinning ones),and then the influences of stress level and stress rate on the ratchetting and fatigue life are discussed.The experimental results demonstrate that different evolution characteristics of whole-life ratchetting and fatigue life presented during cyclic tests with various mean stresses,stress amplitudes and stress rates are determined by the dominated plastic deformation mechanisms.It’s worth noting that the ratchetting can occur in the compressive direction even in the cyclic tests with a positive(tensile)mean stress,and the fatigue life increases first and then decreases with the increase of mean stress on account of the interaction between dislocation slipping and twinning/detwinning mechanisms.Comparing the fatigue lives obtained in the asymmetric stress-controlled and symmetrical strain-controlled cycle tests,it is seen that the ratchetting deformation causes an additional damage,and then leads to a shortening of fatigue life.
基金supported by the National Natural Science Foundation of China(Nos.11972267,11802214 and 51932006)the Fundamental Research Funds for the Central Universities(WUT:2020lll031GX).
文摘A rate-dependent peridynamic ceramic model,considering the brittle tensile response,compressive plastic softening and strain-rate dependence,can accurately represent the dynamic response and crack propagation of ceramic materials.However,it also considers the strain-rate dependence and damage accumulation caused by compressive plastic softening during the compression stage,requiring more computational resources for the bond force evaluation and damage evolution.Herein,the OpenMP parallel optimization of the rate-dependent peridynamic ceramicmodel is investigated.Also,themodules that compute the interactions betweenmaterial points and update damage index are vectorized and parallelized.Moreover,the numerical examples are carried out to simulate the dynamic response and fracture of the ceramic plate under normal impact.Furthermore,the speed-up ratio and computational efficiency by multi-threads are evaluated and discussed to demonstrate the reliability of parallelized programs.The results reveal that the totalwall clock time has been significantly reduced after optimization,showing the promise of parallelization process in terms of accuracy and stability.
文摘A series of fully reversed axial, torsional strain-controlled cyclic tests and two multiaxial ratcheting tests were conducted on weld metal specimens using an Instron8521 tension-torsional servo-controlled testing machine. The weld metal showed clear cyclic softening under axial, torsional and multiaxial loading. A modified kinematic hardening rule was proposed in which a multiaxial-loading-dependent parameter incorporated the radial evanescence term of the Burlet-Cailletaud mode with the Ohno-Wang kinematic hardening rule to predict the multiaxial ratcheting effects. The introduction of yield stress evolved with accumulated plasticity strain enables the model to predict cyclic plasticity behavior of cyclic softening or cyclic hardening materials. Thus modified model considers the isotropic hardening as well as kinematic hardening of yield surface, and it can present description of plasticity behavior and ratcheting of cyclic softening and cyclic hardening materials well under multiaxial loading.
