This study proposes a novel open-type rectangular breakwater combined with horizontal perforated plates on both sides to enhance the sheltering effect of the rectangular box-type breakwaters against longer waves.The h...This study proposes a novel open-type rectangular breakwater combined with horizontal perforated plates on both sides to enhance the sheltering effect of the rectangular box-type breakwaters against longer waves.The hydrodynamic characteristics of this breakwater are analyzed through analytical potential solutions and experimental tests.The quadratic pressure drop conditions are exerted on the horizontal perforated plates to facilitate assessing the effect of wave height on the dissipated wave energy of breakwater through the analytical solution.The hydrodynamic quantities of the breakwater,including the reflection,transmission,and energyloss coefficients,together with vertical and horizontal wave forces,are calculated using the velocity potential decomposition method as well as an iterative algorithm.Furthermore,the reflection and transmission coefficients of the breakwater are measured by conducting experimental tests at various wave periods,wave heights,and both porosities and widths of the horizontal perforated plates.The analytical predicted results demonstrate good agreement with the iterative boundary element method solution and measured data.The influences of variable incident waves and structure parameters on the hydrodynamic characteristics of the breakwater are investigated through further calculations based on analytical solutions.Results indicate that horizontal perforated plates placed on the water surface for both sides of the rectangular breakwater can enhance the wave dissipation ability of the breakwater while effectively decreasing the transmission and reflection coefficients.展开更多
The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel...The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson–Boltzmann equation, whereas the velocity distribution was determined by the Navier–Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5 there is a twofold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights into the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.展开更多
Tunnel heading stability in two dimensions(2D)has been extensively investigated by numerous scholars in the past decade.One significant limitation of 2D analysis is the absence of actual tunnel geometry modeling with ...Tunnel heading stability in two dimensions(2D)has been extensively investigated by numerous scholars in the past decade.One significant limitation of 2D analysis is the absence of actual tunnel geometry modeling with a considerable degree of idealization.Nevertheless,it is possible to study the stability of tunnels in three dimensions(3D)with a rectangular shape using finite element limit analysis(FELA)and a nonlinear programming technique.This paper employs 3D FELA to generate rigorous solutions for stability numbers,failure mechanisms,and safety factors for rectangular-shaped tunnels.To further explore the usefulness of the produced results,multivariate adaptive regression spline(MARS)is used for machine learning of big dataset and development of design equations for practical design applications.The study should be of great benefit to tunnel design practices using the developed equations provided in the paper.展开更多
A nonlinear semi-analytical scheme is proposed for investigating the finiteamplitude nonlinear sloshing in a horizontally baffled rectangular liquid container under the seismic excitation.The sub-domain method is deve...A nonlinear semi-analytical scheme is proposed for investigating the finiteamplitude nonlinear sloshing in a horizontally baffled rectangular liquid container under the seismic excitation.The sub-domain method is developed to analytically derive the modal behaviors of the baffled linear sloshing.The viscosity dissipation effects from the interior liquid and boundary layers are considered.With the introduction of the generalized time-dependent coordinates,the surface wave elevation and velocity potential are represented by a series of linear modal eigenfunctions.The infinite-dimensional modal system of the nonlinear sloshing is formulated based on the Bateman-Luke variational principle,which is further reduced to the finite-dimensional modal system by using the NarimanovMoiseev asymptotic ordering.The base force and overturning moment induced by the nonlinear sloshing are derived as the functions of the generalized time-dependent coordinates.The present results match well with the available analytical,numerical,and experimental results.The paper examines the surface wave elevation,base force,and overturning moment versus the baffle parameters and excitation amplitude in detail.展开更多
We study the spontaneous emission(SE) of an excited nonrelativistic two-level system(TLS) interacting with the vacuum in a waveguide of rectangular cross section. All TLS’s transitions and the center-of-mass motion o...We study the spontaneous emission(SE) of an excited nonrelativistic two-level system(TLS) interacting with the vacuum in a waveguide of rectangular cross section. All TLS’s transitions and the center-of-mass motion of the TLS are taken into account. The SE rate and the carried frequency of the emitted photon for the TLS initially being at rest are obtained, it is found that in the first order of the mass M, the frequency of the emitted photon is smaller than the transition frequency of the TLS and the SE rate is smaller than the SE rate Γfof the TLS fixed in the same waveguide. The SE rate for the TLS initially being moving is obtained in the second order of the mass M. The SE rate is smaller than Γfbut it is dependent not only on the atomic mass but also on the initial momentum. The carried frequency of the emitted photon is decreased when it travels along the direction of the initial momentum, whereas it is increased when it travels in the opposite direction of the initial momentum.展开更多
The underexpanded microjet emerging from a rectangular convergent nozzle with a high aspect ratio at the nozzle exit is investigated numerically using the Reynolds-averaged Navier-Stokes (RANS) simulation with the Men...The underexpanded microjet emerging from a rectangular convergent nozzle with a high aspect ratio at the nozzle exit is investigated numerically using the Reynolds-averaged Navier-Stokes (RANS) simulation with the Menter’s shear stress transport (SST) k-ω turbulence model. The simulation is performed at the nozzle pressure ratio of 5.0 to produce a strong shock and it is validated by a comparison with a rainbow schlieren picture of the microjet. The three-dimensional structure of the shock-containing rectangular microjet is demonstrated using the isopycnic surface and bright-field schlieren representations.展开更多
The chaotic motion behavior of the rectangular conductive thin plate that is simply supported on four sides by airflow andmechanical external excitation in a magnetic field is studied.According to Kirchhoff’s thin pl...The chaotic motion behavior of the rectangular conductive thin plate that is simply supported on four sides by airflow andmechanical external excitation in a magnetic field is studied.According to Kirchhoff’s thin plate theory,considering geometric nonlinearity and using the principle of virtualwork,the nonlinearmotion partial differential equation of the rectangular conductive thin plate is deduced.Using the separate variable method and Galerkin’s method,the system motion partial differential equation is converted into the general equation of the Duffing equation;the Hamilton system is introduced,and the Melnikov function is used to analyze the Hamilton system,and obtain the critical surface for the existence of chaos.The bifurcation diagram,phase portrait,time history response and Poincarémap of the vibration system are obtained by numerical simulation,and the correctness is demonstrated.The results showthatwhen the ratio of external excitation amplitude to damping coefficient is higher than the critical surface,the system will enter chaotic state.The chaotic motion of the rectangular conductive thin plate is affected by different magnetic field distributions and airflow.展开更多
Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved ...Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.展开更多
基金supported by the National Natural Sci-ence Foundation of China(Nos.52201345,and 52001293)the New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘This study proposes a novel open-type rectangular breakwater combined with horizontal perforated plates on both sides to enhance the sheltering effect of the rectangular box-type breakwaters against longer waves.The hydrodynamic characteristics of this breakwater are analyzed through analytical potential solutions and experimental tests.The quadratic pressure drop conditions are exerted on the horizontal perforated plates to facilitate assessing the effect of wave height on the dissipated wave energy of breakwater through the analytical solution.The hydrodynamic quantities of the breakwater,including the reflection,transmission,and energyloss coefficients,together with vertical and horizontal wave forces,are calculated using the velocity potential decomposition method as well as an iterative algorithm.Furthermore,the reflection and transmission coefficients of the breakwater are measured by conducting experimental tests at various wave periods,wave heights,and both porosities and widths of the horizontal perforated plates.The analytical predicted results demonstrate good agreement with the iterative boundary element method solution and measured data.The influences of variable incident waves and structure parameters on the hydrodynamic characteristics of the breakwater are investigated through further calculations based on analytical solutions.Results indicate that horizontal perforated plates placed on the water surface for both sides of the rectangular breakwater can enhance the wave dissipation ability of the breakwater while effectively decreasing the transmission and reflection coefficients.
基金Project supported by the Natural Science Foundation of Inner Mongolia of China(Grant No.2021BS01008)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region(Grant No.NMGIRT2323)the Scientific Research Funding Project for introduced high level talents of IMNU(Grant No.2020YJRC014)。
文摘The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson–Boltzmann equation, whereas the velocity distribution was determined by the Navier–Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5 there is a twofold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights into the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.
基金supported by the Thailand Science Research and Innovation Fundamental Fund fiscal year 2023The fifth author (V.Kamchoom)acknowledges the financial support from the National Science,Research and Innovation Fund (NSRF)at King Mongkut's Institute of Technology Ladkrabang (KMITL),Thailand (Grant No.FRB66065/0258-RE-KRIS/FF66/53)+1 种基金the Climate Change and Climate Variability Research in Monsoon Asia (CMON3)from the National Research Council of Thailand (NRCT) (Grant No.N10A650844)the National Natural Science Foundation of China (NSFC).
文摘Tunnel heading stability in two dimensions(2D)has been extensively investigated by numerous scholars in the past decade.One significant limitation of 2D analysis is the absence of actual tunnel geometry modeling with a considerable degree of idealization.Nevertheless,it is possible to study the stability of tunnels in three dimensions(3D)with a rectangular shape using finite element limit analysis(FELA)and a nonlinear programming technique.This paper employs 3D FELA to generate rigorous solutions for stability numbers,failure mechanisms,and safety factors for rectangular-shaped tunnels.To further explore the usefulness of the produced results,multivariate adaptive regression spline(MARS)is used for machine learning of big dataset and development of design equations for practical design applications.The study should be of great benefit to tunnel design practices using the developed equations provided in the paper.
基金Project supported by the National Natural Science Foundation of China(Nos.51978336 and11702117)。
文摘A nonlinear semi-analytical scheme is proposed for investigating the finiteamplitude nonlinear sloshing in a horizontally baffled rectangular liquid container under the seismic excitation.The sub-domain method is developed to analytically derive the modal behaviors of the baffled linear sloshing.The viscosity dissipation effects from the interior liquid and boundary layers are considered.With the introduction of the generalized time-dependent coordinates,the surface wave elevation and velocity potential are represented by a series of linear modal eigenfunctions.The infinite-dimensional modal system of the nonlinear sloshing is formulated based on the Bateman-Luke variational principle,which is further reduced to the finite-dimensional modal system by using the NarimanovMoiseev asymptotic ordering.The base force and overturning moment induced by the nonlinear sloshing are derived as the functions of the generalized time-dependent coordinates.The present results match well with the available analytical,numerical,and experimental results.The paper examines the surface wave elevation,base force,and overturning moment versus the baffle parameters and excitation amplitude in detail.
基金supported by the Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province, China (Grant No. 2020RC4047)the National Natural Science Foundation of China (Grant Nos. 11975095, 12075082, and 11935006)。
文摘We study the spontaneous emission(SE) of an excited nonrelativistic two-level system(TLS) interacting with the vacuum in a waveguide of rectangular cross section. All TLS’s transitions and the center-of-mass motion of the TLS are taken into account. The SE rate and the carried frequency of the emitted photon for the TLS initially being at rest are obtained, it is found that in the first order of the mass M, the frequency of the emitted photon is smaller than the transition frequency of the TLS and the SE rate is smaller than the SE rate Γfof the TLS fixed in the same waveguide. The SE rate for the TLS initially being moving is obtained in the second order of the mass M. The SE rate is smaller than Γfbut it is dependent not only on the atomic mass but also on the initial momentum. The carried frequency of the emitted photon is decreased when it travels along the direction of the initial momentum, whereas it is increased when it travels in the opposite direction of the initial momentum.
文摘The underexpanded microjet emerging from a rectangular convergent nozzle with a high aspect ratio at the nozzle exit is investigated numerically using the Reynolds-averaged Navier-Stokes (RANS) simulation with the Menter’s shear stress transport (SST) k-ω turbulence model. The simulation is performed at the nozzle pressure ratio of 5.0 to produce a strong shock and it is validated by a comparison with a rainbow schlieren picture of the microjet. The three-dimensional structure of the shock-containing rectangular microjet is demonstrated using the isopycnic surface and bright-field schlieren representations.
基金funded by the Anhui Provincial Natural Science Foundation(Grant No.2008085QE245)the Natural Science Research Project of Higher Education Institutions in Anhui Province(2022AH040045)the Project of Science and Technology Plan of Department of Housing and Urban-Rural Development of Anhui Province(2021-YF22).
文摘The chaotic motion behavior of the rectangular conductive thin plate that is simply supported on four sides by airflow andmechanical external excitation in a magnetic field is studied.According to Kirchhoff’s thin plate theory,considering geometric nonlinearity and using the principle of virtualwork,the nonlinearmotion partial differential equation of the rectangular conductive thin plate is deduced.Using the separate variable method and Galerkin’s method,the system motion partial differential equation is converted into the general equation of the Duffing equation;the Hamilton system is introduced,and the Melnikov function is used to analyze the Hamilton system,and obtain the critical surface for the existence of chaos.The bifurcation diagram,phase portrait,time history response and Poincarémap of the vibration system are obtained by numerical simulation,and the correctness is demonstrated.The results showthatwhen the ratio of external excitation amplitude to damping coefficient is higher than the critical surface,the system will enter chaotic state.The chaotic motion of the rectangular conductive thin plate is affected by different magnetic field distributions and airflow.
基金support of this work by the National Natural Science Foundation of China(No.51405096)the Fundamental Research Funds for the Central Universities(HEUCF210710).
文摘Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.
