The practical applications of high-capacity alloy-type anode materials in sodium-ion batteries(SIBs)are challenged by their vast volume effects and resulting unstable electrode-electrolyte interphases during discharge...The practical applications of high-capacity alloy-type anode materials in sodium-ion batteries(SIBs)are challenged by their vast volume effects and resulting unstable electrode-electrolyte interphases during discharge-charge cycling.Taking red phosphorus(P)/carbon anode material as an example,we report an on-site conversion reaction to intentionally eliminate the volume effect-dominated surface P and yield an ionically conducting layer of Na3PS4solid-state electrolyte on the composite.Such a surface reconstruction can significantly suppress the electrode swelling and simultaneously enable the activation energy of interfacial Na+transfer as low as 36.7 k J mol^(-1),resulting in excellent electrode stability and ultrafast reaction kinetics.Consequently,excellent cycling performance(510 mA h g^(-1)at 5 A g^(-1)after 1000 cycles with a tiny capacity fading rate of 0.016%per cycle)and outstanding rate capability(484 mA h g^(-1)at 10 A g^(-1)are achieved in half cells.When coupled with Na_(3)V_(2)(PO4)3cathode,the full cells exhibit 100%capacity retention over 200 cycles at 5C with an average Coulombic efficiency of 99.93%and a high energy density of 125.5 W h kg^(-1)at a power density of 8215.6 W kg^(-1)(charge or discharge within~49 s).Remarkably,the full cell can steadily operate at a high areal capacity of 1.9 mA h cm^(-2),the highest level among red P-based full SIBs ever reported.展开更多
Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH&l...Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. .展开更多
Supercapacitors have attracted much attention in the field of electrochemical energy storage.However,material preparation,stability,performance as well as power density limit their applications in many fields.Herein,a...Supercapacitors have attracted much attention in the field of electrochemical energy storage.However,material preparation,stability,performance as well as power density limit their applications in many fields.Herein,a sponge-like red phosphorus@graphene(rP@rGO)negative electrode and a Ni2P positive electrode were prepared using a simple one-step method.Both electrodes showed excellent performances(294 F g^−1 and 1526.6 F g^−1 for rP@rGO and Ni2P,respectively),which seem to be the highest among all rP@rGO-and Ni2P-based electrodes reported so far.The asymmetric solid-state supercapacitor was assembled by sandwiching a gel electrolyte-soaked cellulose paper between rP@rGO and Ni2P as the negative and positive electrodes.Compared to other asymmetric devices,the device,which attained a high operating window of up to 1.6 V,showed high energy and power density values of 41.66 and 1200 W kg−1,respectively.It also has an excellent cyclic stability up to 88%after various consecutive charge/discharge tests.Additionally,the device could power commercial light emitting diodes and fans for 30 s.So,the ease of the synthesis method and excellent performance of the prepared electrode materials mat have significant potential for energy storage applications.展开更多
The inherent difficulty in preservation and processing of conventional red phosphorus flame retardant severely limits its growing applications in polymer materials,thus,there is an urgent need to exploit effective tec...The inherent difficulty in preservation and processing of conventional red phosphorus flame retardant severely limits its growing applications in polymer materials,thus,there is an urgent need to exploit effective technology to modify red phosphorus.Functionalized lignin-based compounds can provide a great potential in improving the preservation and processing of red phosphorus.Here,we prepared melamine modified lignin/aluminum phosphate coated red phosphorus(LMAP@RP)and used it as the flame retardant of acrylonitrile-butadiene-styrene(ABS)resin.With 25wt%loading LMAP@RP,the ABS samples show excellent flame inhibiting capacity and reached UL-94 V-0 rating.Cone calorimetry test results show that the peak heat release rate,total heat release and total smoke release of ABS/25LMAP@RP are reduced strikingly by 64.6%,49.3%,and 30.1%,respectively.The char residue is 15.36wt%and the char layer is continuous and dense.The outstanding flame retardant and smoke-suppressant performances of LMAP@RP show its application prospect for ABS.展开更多
Secondary batteries are widely used in energy storage equipment.To obtain high-performance batteries,the development and utilization of electrode materials with cheap price and ideal theoretical gravimetric and volume...Secondary batteries are widely used in energy storage equipment.To obtain high-performance batteries,the development and utilization of electrode materials with cheap price and ideal theoretical gravimetric and volumetric specific capacities have become particularly important.Naturally abundant and low-cost red phosphorus(RP)is recognized as an anode material with great promise because it has a theoretical capacity of 2596 mA h g^(-1) in lithium-ion batteries(LIBs)and sodium-ion batteries(SIBs).However,owing to the inferior discharging,the capacity of pure RP has a fast decay.Nanoconfinement of RP nanoparticles within porous carbon framework is one of the efficient methods to overcome these problems.In this review,we introduce the recent progress of RP confinement into carbon matrix as an energy storage anode material in LIBs,SIBs and potassium-ion batteries(PIBs).The synthetic strategies,lithiation/sodia tion/potassiation mechanism,and the electrochemical performances of RP/carbon composites(RP/C)with kinds of designed structures and P-C and P-O-C bond by kinds of methods are included.Finally,the challenges and perspectives of RP faced in the application development as anodes for LIBs/SIBs/PIBs are covered.This review will strengthen the understanding of composites of RP nanoparticles in porous carbon materials and aid researchers to carry out future work rationally.展开更多
Sol-gel method was utilized to synthesize two different series of red silicate phosphors:MgSiO3 and Mg2SiO4 powder samples doped with Mn2+, conducted the investigation of red long-lasting phosphor: MgSiO3:Eu2+, Dy3+, ...Sol-gel method was utilized to synthesize two different series of red silicate phosphors:MgSiO3 and Mg2SiO4 powder samples doped with Mn2+, conducted the investigation of red long-lasting phosphor: MgSiO3:Eu2+, Dy3+, Mn2+. TGA curves of the gel precursor for two series depicted that the loss of residual organic groups and NO3 groups occurs below 450 ℃. According to the XRD patterns, the major diffraction peaks of the MgSiO3 and Mg2SiO4 series are consistent with a proto-enstatite structure (JCPDS No.11-0273) and a forsterite structure (JCPDS No.85-1364) respectively. With the excitation at 415 nm, the red emission band of Mn2+ ions is peaked at 661 nm for MgSiO3:1%(atom fraction) Mn2+ or 644 nm for Mg2SiO4:1%(atom fraction) Mn2+. Compared with Mg2SiO4:Mn2+ samples, MgSiO3:Mn2+ samples exhibit higher luminescence intensity and higher quenching concentration. In addition, the two series co-doped with Eu2+, Dy3+, Mn2+ were also prepared. Photo-luminescence and afterglow properties of the two co-doped series were analyzed, which show that MgSiO3:Eu2+, Dy3+, Mn2+ is more suitable for a red long-lasting phosphor.展开更多
Ca(NO3)2·4H2O, Eu(NO3)3 and H2C2O4·2H2O were adopted to synthesize CaO: Eu3+ with the chemical co-precipitation method, and the effects of the calcination temperature and Eu3+ doping concentration on the pho...Ca(NO3)2·4H2O, Eu(NO3)3 and H2C2O4·2H2O were adopted to synthesize CaO: Eu3+ with the chemical co-precipitation method, and the effects of the calcination temperature and Eu3+ doping concentration on the phosphor structure and its luminescent properties were investigated by TG-SDTA, XRD, and PL-PLE. The results confirm that the Eu3+ ions as luminescent centers substi-tutes Ca2+ sites without changing the crystal structure of cubic CaO. The optimum calcination tem-perature and the optimum concentration of Eu3+ are 1 100 ℃ and 1 mol%, respectively, under which the best crystallinity and highest PL intensity appeared. The maximum emission wavelength is 592 nm (5D0→7F1) which is excited by xenon lamp with the wavelength of 200-280 nm, indicating that the Eu3+ ion mainly locates in the symmetric position (Oh) in the crystal lattice of CaO.展开更多
A complete solid solutions with monophasic zircon-type structure of vanadates of formula GdxBi0.95-xVO4:0.05Eu3+(x = 0–0.95) are synthesized by combined method of co-precipitation and hydrothermal synthesis. Their mi...A complete solid solutions with monophasic zircon-type structure of vanadates of formula GdxBi0.95-xVO4:0.05Eu3+(x = 0–0.95) are synthesized by combined method of co-precipitation and hydrothermal synthesis. Their microstructures and morphologies are characterized by X-ray powder diffraction and transmission electronic microscope, and the results show that each of all the samples has a monophasic zircon-type structure. The absorption spectrum of the prepared phosphor shows a blue-shift of the fundamental absorption band edge with increasing the gadolinium content. Under UV-light and visible-light excitation, all the prepared phosphors show the typical luminescence properties of Eu3+in the zircon-type structure. The emission intensity of GdxBi0.95-xVO4:0.05Eu3+(x = 0.55) is strongest in all samples under UV-light and visible-light excitations. Finally, the mechanisms of luminescence of Eu3+in the GdxBi0.95-xVO4:0.05Eu3+(x = 0–0.95)solid solutions are analyzed and discussed.展开更多
A series of (SrNa)2-xEux(MoO4)3 red phosphors have been synthesized by using the sol-gel method. X-ray diffraction, used to characterize the crystallization process of the phosphor precursors, indicates that the (SrNa...A series of (SrNa)2-xEux(MoO4)3 red phosphors have been synthesized by using the sol-gel method. X-ray diffraction, used to characterize the crystallization process of the phosphor precursors, indicates that the (SrNa)2-xEux(MoO4)3 phosphors had an SrMoO4 structure. The properties of these resulting phosphors have also been characterized by using photoluminescence (PL) spectra. The PL results indicate that all of the (SrNa)2-xEux(MoO4)3 phosphors exhibit intense red emissions under 275, 395, and 465-nm excitation. The two strongest lines at 395 and 465 nm in the excitation spectra of these phosphors match well with the two popular emissions from near-UV and blue GaN-based light-emitting diodes. Some process parameters for Eu3+ concentration, (C6H8O7)·H2O concentration, and solution pH value were also investigated. For (SrNa)2-xEux(MoO4)3 phosphors, there are two maximum emission intensities appearing with x = 0.6 and x = 1.4, respectively. When the molar ratio of citric acid is equal to that of metal cations and the solution pH is almost 4, (SrNa)2-xEux(MoO4)3 shows the strongest emission intensity compared to those under other conditions.展开更多
Sm3+-activated Ca2SiO4 red phosphors were prepared by the conventional high-temperature solid-state reaction method, and the effects of sodium (Na+) and samarium (Sm3+) ions doping concentrations on their crystal stru...Sm3+-activated Ca2SiO4 red phosphors were prepared by the conventional high-temperature solid-state reaction method, and the effects of sodium (Na+) and samarium (Sm3+) ions doping concentrations on their crystal structure and luminescent properties were investigated by X-ray diffraction (XRD) and fluorescent spectrofluorometer.XRD patterns demonstrate that a well-crystalline structure forms in the phosphors when they are treated by calcination at 1200°C for 4h, and the excitation spectra exhibit good absorption in the range between 350 and 420nm. Under the irradiation of 405nm near-ultraviolet (NUV) light, the spectra of the phosphors show a main emission peak at 601nm attributed to the 4G5/2 → 6H7/2 transition of Sm3+ions, and its intensity is greatly influenced by the concentrations of Sm3+ and Na2CO3 . When the concentrations of Sm3+ ions and Na2CO3 are 2mol% and 6mol%, respectively, the optimal emission intensity can be obtained. From strong absorption in the near ultraviolet zone, the Na0.06 Sm0.02Ca1.92SiO4 phosphor is a promising red-emitting phosphor for white light emitting diodes (W-LEDs).展开更多
Highly efficient phosphors under vacuum ultraviolet excitation are still demanded for the development of plasma display panels and Hg-free fluorescent lamps. The phosphors of Eu3+ doped (Y, Gd, Lu)BO3 were synthesized...Highly efficient phosphors under vacuum ultraviolet excitation are still demanded for the development of plasma display panels and Hg-free fluorescent lamps. The phosphors of Eu3+ doped (Y, Gd, Lu)BO3 were synthesized with solid state reaction method and the contents of Y3+, Gd3+, and Lu3+ for plasma display panel red phosphor were optimized under vacuum ultraviolet excitation. Two new potential candidates, which were (Y1-S-TGdSLuT)BO3: Eu3+ (0<S<0.2, 0<T≤0.1) and (GdIYJLuK)BO3: Eu3+ (0.5<I<0.7, 0.2<J<0.4, 0<K≤0.1), were obtained. The mechanism of luminescence improvement was discussed upon the analysis of crystal microstructure and excitation spectra.展开更多
The S-scheme heterojunctions can effectively separate photogenerated electrons and holes,retain their high redox capacity,and provide great prospects for enhancing the photocatalytic activity of the composites in diff...The S-scheme heterojunctions can effectively separate photogenerated electrons and holes,retain their high redox capacity,and provide great prospects for enhancing the photocatalytic activity of the composites in different fields.Herein,S-scheme heterojunction photocatalytic materials were rationally designed and prepared by a simple hydrothermal method between narrow-bandgap red phosphorus(HRP)and wide-bandgap BaTiO_(3)(BTO)photocatalysts.Owing to the effective charge separation and redox ability from the S-scheme mechanism and oxygen vacancies,BTO/HRP exhibited good photoelectrochemical and photocatalytic degradation ability.Systematic photoreaction tests demonstrated that BTO/HRP had high practicality in the removal of pollutants from wastewater;its photodegradation rate of Rhodamine B reached 3.029×10^(−1) min^(−1) in 12 min;and it could inactivate 1.8×10^(9) CFU/mL of Escherichia.coli in 1 h,with an antibacterial rate of 99.8%.This paper provided a promising photocatalyst for pollutant removal and a new strategy for the fabrication of efficient RP-based photocatalytic materials.展开更多
Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural ...Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural modification.The correlations among structural evolution,crystal-field environment,and luminescence properties were elucidated.Replacing Sr^(2+)with Gd^(3+)in(Sr,Gd)LiAl_(3)N_(4):Eu^(2+)leads to the enhanced crystal field splitting,larger Stokes shift,and increased structural polyhedron distortion differences,consequently resulting in spectral red-shift and broadening.For further spectral tuning,Mg,with lower electronegativity,was also introduced to modify the local crystal structure,consequently resulting in a further red-shift towards 675 nm and enhanced photoluminescence intensity in(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+).What’s more,w-LEDs were fabricated by using blue LED chip,blue,green,red and deep red((Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+))phosphors whose color rendering index were Ra 96.0 and R997.7.All above results demonstrate that the partial replacements of Sr^(2+)by Gd^(3+)and Al^(3+)by Mg^(2+)are effective methods for spectral modulation and(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)phosphors are suitable for highquality full-spectrum WLEDs.展开更多
Herein,double-perovskite Ba_(2)LaTaO_(6) Eu-doped orange-red phosphors were successfully synthesized using a high-temperature solid-phase method.The phosphor phase purity was investigated using X-ray diffraction and m...Herein,double-perovskite Ba_(2)LaTaO_(6) Eu-doped orange-red phosphors were successfully synthesized using a high-temperature solid-phase method.The phosphor phase purity was investigated using X-ray diffraction and microscopic morphology analyses.Their luminescence properties were investigated using absorption,emission,excitation,and temperature-dependent spectra.The transition mechanism mainly involves a magnetic-dipole transition with an energy transfer mode featuring multipole-multipole interactions,and concentration quenching is achieved via dipole-dipole interactions.In addition,the intensity of the temperature-dependent spectrum increases abnormally between 298 and 373 K,with the luminous intensity at 373 K increasing to 110%of that observed at room temperature.This phenomenon can be attributed to lattice defects in Ba_(2)LaTaO_(6):Eu^(3+),and the phosphor luminous intensity at473 K remains at 80.62%of that at room temperature.In addition,white-light-emitting diode devices based on this novel Ba_(2)LaTaO_(6):0.35Eu^(3+)phosphor were fabricated to evaluate the potential applications of the as-prepared phosphor.展开更多
Although lithium-sulfur(Li-S)batteries with high specific energy exhibit great potential for next-generation energy-storage systems,their practical applications are limited by the growth of Li dendrites and lithium po...Although lithium-sulfur(Li-S)batteries with high specific energy exhibit great potential for next-generation energy-storage systems,their practical applications are limited by the growth of Li dendrites and lithium polysulfides(LiPSs)shuttling.Herein,a highly porous red phosphorus sponge(HPPS)with well distributed pore structure was efficiently prepared via a facile and largescale hydrothermal process for polysulfides adsorption and dendrite suppression.As experimental demonstrated,the porous red phosphorus modified separator with increased active site greatly promotes the chemisorption of LiPSs to efficiently immobilize the active sulfur within the cathode section,while Li metal anode activated by Li_(3)P interlayer with abundant ionically conductive channels significantly eliminates the barrier for uniform Li^(+)permeation across the interlayer,contributing to the enhanced stability for both S cathode and Li anode.Mediated by the HPPS,long-term stability of 1,200 h with minor voltage hysteresis is achieved in symmetric cells with Li_(3)P@Li electrode while Li-S half-cell based on HPPS modified separator delivers an outperformed reversibility of 783.0 mAh·g^(−1)after 300 cycles as well as high-rate performance of 694.5 mAh·g^(−1)at 3 C,which further boosts the HPPS tuned full cells in practical S loading(3 mg·cm^(−2))and thin Li3P@Li electrode(100μm)with a capacity retention of 71.8%after 200 cycles at 0.5 C.This work provides a cost-effective and metal free mediator for simultaneously alleviating the fundamental issues of both S cathode and Li anode towards high energy density and long cycle life Li-S full batteries.展开更多
The recovery of rare earth elements(REEs) is a global challenge and the mining of rare earths has serious environmental implications due to the toxic waste released post mining.Hence,the rising demand for rare earths ...The recovery of rare earth elements(REEs) is a global challenge and the mining of rare earths has serious environmental implications due to the toxic waste released post mining.Hence,the rising demand for rare earths and their far reaching electronic applications necessitates an effective strategy to recover the REEs from more viable sources.In this work,the graphene oxide-Aspergillus niger spores(GO-A.niger spores) blend was utilized for adsorptive recovery of a precious rare earth Eu(Ⅲ) and the adsorption variables like pH of the medium,adsorbent dosage,sorption kinetics,thermodynamics,and isotherm were optimized for the developed bioso rbent.The adsorption process suits the Langmuir isotherm model with a maximum adsorption capacity of 147.3 mg/g.The pseudo-second-order kinetics is a perfect fit to describe the adsorption process.The results obtained through the Van’t Hoff plot show negative free energy change(ΔG^(0)) which implies the spontaneity of the adsorption process.The negative standard enthalpy change(ΔH^(0)) values show that the nature of the adsorption process is exothermic.The analytical characterizations including Fourier transform infrared spectroscopy(FTIR),Raman,X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),Brunauer-Emmett-Teller(BET),thermal gravimetric analysis(TGA),and scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX) were employed to study the biosorbent.The features of GO-A.niger spores biosorbent were applied to recover Eu(Ⅲ) from real samples such as fluorescent lamp phosphor,red phosphor powder,and a simulated radioactive waste solution.展开更多
Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to i...Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to its low solubility in aqueous electrolytes.Herein,we propose phosphorus-activated Cu electrocatalysts to generate electron-deficient Cu sites on the catalyst surface to promote the adsorption of N_(2) molecules.The eNRR system is further modified using a gas diffusion electrode(GDE) coated with polytetrafluoroethylene(PTFE) to form an effective three-phase boundary of liquid water-gas N_(2)-solid catalyst to facilitate easy access of N_(2) to the catalytic sites.As a result,the new catalyst in the flow-type cell records a Faradaic efficiency of 13.15% and an NH_(3) production rate of 7.69 μg h^(-1) cm^(-2) at-0.2 V_(RHE),which represent 3.56 and 59.2 times increases from those obtained with a pristine Cu electrode in a typical electrolytic cell.This work represents a successful demonstration of dual modification strategies;catalyst modification and N_(2) supplying system engineering,and the results would provide a useful platform for further developments of electrocatalysts and reaction systems.展开更多
基金support from the National Natural Science Foundation of China(51976143)the Guangdong Key Areas Research and Development Program(2020B090904001 and 2019B090909003)。
文摘The practical applications of high-capacity alloy-type anode materials in sodium-ion batteries(SIBs)are challenged by their vast volume effects and resulting unstable electrode-electrolyte interphases during discharge-charge cycling.Taking red phosphorus(P)/carbon anode material as an example,we report an on-site conversion reaction to intentionally eliminate the volume effect-dominated surface P and yield an ionically conducting layer of Na3PS4solid-state electrolyte on the composite.Such a surface reconstruction can significantly suppress the electrode swelling and simultaneously enable the activation energy of interfacial Na+transfer as low as 36.7 k J mol^(-1),resulting in excellent electrode stability and ultrafast reaction kinetics.Consequently,excellent cycling performance(510 mA h g^(-1)at 5 A g^(-1)after 1000 cycles with a tiny capacity fading rate of 0.016%per cycle)and outstanding rate capability(484 mA h g^(-1)at 10 A g^(-1)are achieved in half cells.When coupled with Na_(3)V_(2)(PO4)3cathode,the full cells exhibit 100%capacity retention over 200 cycles at 5C with an average Coulombic efficiency of 99.93%and a high energy density of 125.5 W h kg^(-1)at a power density of 8215.6 W kg^(-1)(charge or discharge within~49 s).Remarkably,the full cell can steadily operate at a high areal capacity of 1.9 mA h cm^(-2),the highest level among red P-based full SIBs ever reported.
文摘Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. .
基金supported by Basic Sci-ence Research Program through National Research Foundation of Korea(NRF)founded by the ministry of Education(NRF-2017R1D1A1B03030456)
文摘Supercapacitors have attracted much attention in the field of electrochemical energy storage.However,material preparation,stability,performance as well as power density limit their applications in many fields.Herein,a sponge-like red phosphorus@graphene(rP@rGO)negative electrode and a Ni2P positive electrode were prepared using a simple one-step method.Both electrodes showed excellent performances(294 F g^−1 and 1526.6 F g^−1 for rP@rGO and Ni2P,respectively),which seem to be the highest among all rP@rGO-and Ni2P-based electrodes reported so far.The asymmetric solid-state supercapacitor was assembled by sandwiching a gel electrolyte-soaked cellulose paper between rP@rGO and Ni2P as the negative and positive electrodes.Compared to other asymmetric devices,the device,which attained a high operating window of up to 1.6 V,showed high energy and power density values of 41.66 and 1200 W kg−1,respectively.It also has an excellent cyclic stability up to 88%after various consecutive charge/discharge tests.Additionally,the device could power commercial light emitting diodes and fans for 30 s.So,the ease of the synthesis method and excellent performance of the prepared electrode materials mat have significant potential for energy storage applications.
基金Funded by the National Natural Science Foundation of China(No.51503041)the Natural Science Foundation of Fujian Province,China(No.2018J01752)。
文摘The inherent difficulty in preservation and processing of conventional red phosphorus flame retardant severely limits its growing applications in polymer materials,thus,there is an urgent need to exploit effective technology to modify red phosphorus.Functionalized lignin-based compounds can provide a great potential in improving the preservation and processing of red phosphorus.Here,we prepared melamine modified lignin/aluminum phosphate coated red phosphorus(LMAP@RP)and used it as the flame retardant of acrylonitrile-butadiene-styrene(ABS)resin.With 25wt%loading LMAP@RP,the ABS samples show excellent flame inhibiting capacity and reached UL-94 V-0 rating.Cone calorimetry test results show that the peak heat release rate,total heat release and total smoke release of ABS/25LMAP@RP are reduced strikingly by 64.6%,49.3%,and 30.1%,respectively.The char residue is 15.36wt%and the char layer is continuous and dense.The outstanding flame retardant and smoke-suppressant performances of LMAP@RP show its application prospect for ABS.
基金financially supported by the National Natural Science Foundation of China(51808303 and 51672143)the Science and Technology Support Plan for Youth Innovation of Colleges in Shandong Province(DC2000000961)+2 种基金the Taishan Scholar Program,Outstanding Youth of Natural Science in Shandong Province(JQ201713)the Natural Science Foundation of Shandong Province(ZR2019BEE027)the State Key Laboratory of BioFibers and Eco-Textiles(Qingdao University,No.ZKT25 and ZKT30)。
文摘Secondary batteries are widely used in energy storage equipment.To obtain high-performance batteries,the development and utilization of electrode materials with cheap price and ideal theoretical gravimetric and volumetric specific capacities have become particularly important.Naturally abundant and low-cost red phosphorus(RP)is recognized as an anode material with great promise because it has a theoretical capacity of 2596 mA h g^(-1) in lithium-ion batteries(LIBs)and sodium-ion batteries(SIBs).However,owing to the inferior discharging,the capacity of pure RP has a fast decay.Nanoconfinement of RP nanoparticles within porous carbon framework is one of the efficient methods to overcome these problems.In this review,we introduce the recent progress of RP confinement into carbon matrix as an energy storage anode material in LIBs,SIBs and potassium-ion batteries(PIBs).The synthetic strategies,lithiation/sodia tion/potassiation mechanism,and the electrochemical performances of RP/carbon composites(RP/C)with kinds of designed structures and P-C and P-O-C bond by kinds of methods are included.Finally,the challenges and perspectives of RP faced in the application development as anodes for LIBs/SIBs/PIBs are covered.This review will strengthen the understanding of composites of RP nanoparticles in porous carbon materials and aid researchers to carry out future work rationally.
基金Project is supported by National High Technology Research and Development Program of China (863 Program) (2002 AA 324060)National Natural Science Foundation of China (10404028)
文摘Sol-gel method was utilized to synthesize two different series of red silicate phosphors:MgSiO3 and Mg2SiO4 powder samples doped with Mn2+, conducted the investigation of red long-lasting phosphor: MgSiO3:Eu2+, Dy3+, Mn2+. TGA curves of the gel precursor for two series depicted that the loss of residual organic groups and NO3 groups occurs below 450 ℃. According to the XRD patterns, the major diffraction peaks of the MgSiO3 and Mg2SiO4 series are consistent with a proto-enstatite structure (JCPDS No.11-0273) and a forsterite structure (JCPDS No.85-1364) respectively. With the excitation at 415 nm, the red emission band of Mn2+ ions is peaked at 661 nm for MgSiO3:1%(atom fraction) Mn2+ or 644 nm for Mg2SiO4:1%(atom fraction) Mn2+. Compared with Mg2SiO4:Mn2+ samples, MgSiO3:Mn2+ samples exhibit higher luminescence intensity and higher quenching concentration. In addition, the two series co-doped with Eu2+, Dy3+, Mn2+ were also prepared. Photo-luminescence and afterglow properties of the two co-doped series were analyzed, which show that MgSiO3:Eu2+, Dy3+, Mn2+ is more suitable for a red long-lasting phosphor.
基金Funded by the Science and Technology Bureau of Sichun Province(No.2006J13-059)Education Bureau of Sichun Province (No. 2006A094)
文摘Ca(NO3)2·4H2O, Eu(NO3)3 and H2C2O4·2H2O were adopted to synthesize CaO: Eu3+ with the chemical co-precipitation method, and the effects of the calcination temperature and Eu3+ doping concentration on the phosphor structure and its luminescent properties were investigated by TG-SDTA, XRD, and PL-PLE. The results confirm that the Eu3+ ions as luminescent centers substi-tutes Ca2+ sites without changing the crystal structure of cubic CaO. The optimum calcination tem-perature and the optimum concentration of Eu3+ are 1 100 ℃ and 1 mol%, respectively, under which the best crystallinity and highest PL intensity appeared. The maximum emission wavelength is 592 nm (5D0→7F1) which is excited by xenon lamp with the wavelength of 200-280 nm, indicating that the Eu3+ ion mainly locates in the symmetric position (Oh) in the crystal lattice of CaO.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB211708)the National Natural Science Foundation of China(Grant Nos.51272097,61265004,and 61307111)the Natural Science Foundation of Yunnan Province,China(Grant No.2012FD009)
文摘A complete solid solutions with monophasic zircon-type structure of vanadates of formula GdxBi0.95-xVO4:0.05Eu3+(x = 0–0.95) are synthesized by combined method of co-precipitation and hydrothermal synthesis. Their microstructures and morphologies are characterized by X-ray powder diffraction and transmission electronic microscope, and the results show that each of all the samples has a monophasic zircon-type structure. The absorption spectrum of the prepared phosphor shows a blue-shift of the fundamental absorption band edge with increasing the gadolinium content. Under UV-light and visible-light excitation, all the prepared phosphors show the typical luminescence properties of Eu3+in the zircon-type structure. The emission intensity of GdxBi0.95-xVO4:0.05Eu3+(x = 0.55) is strongest in all samples under UV-light and visible-light excitations. Finally, the mechanisms of luminescence of Eu3+in the GdxBi0.95-xVO4:0.05Eu3+(x = 0–0.95)solid solutions are analyzed and discussed.
文摘A series of (SrNa)2-xEux(MoO4)3 red phosphors have been synthesized by using the sol-gel method. X-ray diffraction, used to characterize the crystallization process of the phosphor precursors, indicates that the (SrNa)2-xEux(MoO4)3 phosphors had an SrMoO4 structure. The properties of these resulting phosphors have also been characterized by using photoluminescence (PL) spectra. The PL results indicate that all of the (SrNa)2-xEux(MoO4)3 phosphors exhibit intense red emissions under 275, 395, and 465-nm excitation. The two strongest lines at 395 and 465 nm in the excitation spectra of these phosphors match well with the two popular emissions from near-UV and blue GaN-based light-emitting diodes. Some process parameters for Eu3+ concentration, (C6H8O7)·H2O concentration, and solution pH value were also investigated. For (SrNa)2-xEux(MoO4)3 phosphors, there are two maximum emission intensities appearing with x = 0.6 and x = 1.4, respectively. When the molar ratio of citric acid is equal to that of metal cations and the solution pH is almost 4, (SrNa)2-xEux(MoO4)3 shows the strongest emission intensity compared to those under other conditions.
基金finacially supported by the National Natural Science Foundation of China (Nos. 11004154 and 10874160)the Scienceand Technology Foundation of Guangdong Province, China (No. 2007173)
文摘Sm3+-activated Ca2SiO4 red phosphors were prepared by the conventional high-temperature solid-state reaction method, and the effects of sodium (Na+) and samarium (Sm3+) ions doping concentrations on their crystal structure and luminescent properties were investigated by X-ray diffraction (XRD) and fluorescent spectrofluorometer.XRD patterns demonstrate that a well-crystalline structure forms in the phosphors when they are treated by calcination at 1200°C for 4h, and the excitation spectra exhibit good absorption in the range between 350 and 420nm. Under the irradiation of 405nm near-ultraviolet (NUV) light, the spectra of the phosphors show a main emission peak at 601nm attributed to the 4G5/2 → 6H7/2 transition of Sm3+ions, and its intensity is greatly influenced by the concentrations of Sm3+ and Na2CO3 . When the concentrations of Sm3+ ions and Na2CO3 are 2mol% and 6mol%, respectively, the optimal emission intensity can be obtained. From strong absorption in the near ultraviolet zone, the Na0.06 Sm0.02Ca1.92SiO4 phosphor is a promising red-emitting phosphor for white light emitting diodes (W-LEDs).
基金supported by the Special Foundation of Hefei University of Technology for Doctor Degree Staff (103-036402)the Postdoctoral Research Fellow of Materials Science and Engineering of Hefei University of Technology (103-035038)
文摘Highly efficient phosphors under vacuum ultraviolet excitation are still demanded for the development of plasma display panels and Hg-free fluorescent lamps. The phosphors of Eu3+ doped (Y, Gd, Lu)BO3 were synthesized with solid state reaction method and the contents of Y3+, Gd3+, and Lu3+ for plasma display panel red phosphor were optimized under vacuum ultraviolet excitation. Two new potential candidates, which were (Y1-S-TGdSLuT)BO3: Eu3+ (0<S<0.2, 0<T≤0.1) and (GdIYJLuK)BO3: Eu3+ (0.5<I<0.7, 0.2<J<0.4, 0<K≤0.1), were obtained. The mechanism of luminescence improvement was discussed upon the analysis of crystal microstructure and excitation spectra.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.52063028,22208275 and 22268003)the Ph.D.Startup Fund of Xinjiang Normal Univer-sity(No.XJNUBS1907)+1 种基金the Xinjiang Normal University Outstanding Young Teachers’Research Initiation Project(No.XJNU202015)the Innovation team for monitoring of emerging contaminants and biomarkers(No.2021D14017).
文摘The S-scheme heterojunctions can effectively separate photogenerated electrons and holes,retain their high redox capacity,and provide great prospects for enhancing the photocatalytic activity of the composites in different fields.Herein,S-scheme heterojunction photocatalytic materials were rationally designed and prepared by a simple hydrothermal method between narrow-bandgap red phosphorus(HRP)and wide-bandgap BaTiO_(3)(BTO)photocatalysts.Owing to the effective charge separation and redox ability from the S-scheme mechanism and oxygen vacancies,BTO/HRP exhibited good photoelectrochemical and photocatalytic degradation ability.Systematic photoreaction tests demonstrated that BTO/HRP had high practicality in the removal of pollutants from wastewater;its photodegradation rate of Rhodamine B reached 3.029×10^(−1) min^(−1) in 12 min;and it could inactivate 1.8×10^(9) CFU/mL of Escherichia.coli in 1 h,with an antibacterial rate of 99.8%.This paper provided a promising photocatalyst for pollutant removal and a new strategy for the fabrication of efficient RP-based photocatalytic materials.
基金supported by the National Key Research and Development Program of China(2021YFB3500402)。
文摘Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural modification.The correlations among structural evolution,crystal-field environment,and luminescence properties were elucidated.Replacing Sr^(2+)with Gd^(3+)in(Sr,Gd)LiAl_(3)N_(4):Eu^(2+)leads to the enhanced crystal field splitting,larger Stokes shift,and increased structural polyhedron distortion differences,consequently resulting in spectral red-shift and broadening.For further spectral tuning,Mg,with lower electronegativity,was also introduced to modify the local crystal structure,consequently resulting in a further red-shift towards 675 nm and enhanced photoluminescence intensity in(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+).What’s more,w-LEDs were fabricated by using blue LED chip,blue,green,red and deep red((Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+))phosphors whose color rendering index were Ra 96.0 and R997.7.All above results demonstrate that the partial replacements of Sr^(2+)by Gd^(3+)and Al^(3+)by Mg^(2+)are effective methods for spectral modulation and(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)phosphors are suitable for highquality full-spectrum WLEDs.
基金Project supported by the National Natural Science Foundation of China (52262020)the Science and Technology Foundation of Guizhou Province (ZK[2021]yiban 328)。
文摘Herein,double-perovskite Ba_(2)LaTaO_(6) Eu-doped orange-red phosphors were successfully synthesized using a high-temperature solid-phase method.The phosphor phase purity was investigated using X-ray diffraction and microscopic morphology analyses.Their luminescence properties were investigated using absorption,emission,excitation,and temperature-dependent spectra.The transition mechanism mainly involves a magnetic-dipole transition with an energy transfer mode featuring multipole-multipole interactions,and concentration quenching is achieved via dipole-dipole interactions.In addition,the intensity of the temperature-dependent spectrum increases abnormally between 298 and 373 K,with the luminous intensity at 373 K increasing to 110%of that observed at room temperature.This phenomenon can be attributed to lattice defects in Ba_(2)LaTaO_(6):Eu^(3+),and the phosphor luminous intensity at473 K remains at 80.62%of that at room temperature.In addition,white-light-emitting diode devices based on this novel Ba_(2)LaTaO_(6):0.35Eu^(3+)phosphor were fabricated to evaluate the potential applications of the as-prepared phosphor.
基金supported by the National Natural Science Foundation of China(Nos.52074359,51904342,and U21A20284)the Hunan Provincial Science and Technology Plan(No.2020JJ3048)the Science and Technology Innovation Program of Hunan Province(Nos.2021RC3014,2020RC4005,and 2019RS1004).
文摘Although lithium-sulfur(Li-S)batteries with high specific energy exhibit great potential for next-generation energy-storage systems,their practical applications are limited by the growth of Li dendrites and lithium polysulfides(LiPSs)shuttling.Herein,a highly porous red phosphorus sponge(HPPS)with well distributed pore structure was efficiently prepared via a facile and largescale hydrothermal process for polysulfides adsorption and dendrite suppression.As experimental demonstrated,the porous red phosphorus modified separator with increased active site greatly promotes the chemisorption of LiPSs to efficiently immobilize the active sulfur within the cathode section,while Li metal anode activated by Li_(3)P interlayer with abundant ionically conductive channels significantly eliminates the barrier for uniform Li^(+)permeation across the interlayer,contributing to the enhanced stability for both S cathode and Li anode.Mediated by the HPPS,long-term stability of 1,200 h with minor voltage hysteresis is achieved in symmetric cells with Li_(3)P@Li electrode while Li-S half-cell based on HPPS modified separator delivers an outperformed reversibility of 783.0 mAh·g^(−1)after 300 cycles as well as high-rate performance of 694.5 mAh·g^(−1)at 3 C,which further boosts the HPPS tuned full cells in practical S loading(3 mg·cm^(−2))and thin Li3P@Li electrode(100μm)with a capacity retention of 71.8%after 200 cycles at 0.5 C.This work provides a cost-effective and metal free mediator for simultaneously alleviating the fundamental issues of both S cathode and Li anode towards high energy density and long cycle life Li-S full batteries.
基金Project supported by Science and Engineering Research Board,Department of Science and Technology,India (EMR/2016/005231)。
文摘The recovery of rare earth elements(REEs) is a global challenge and the mining of rare earths has serious environmental implications due to the toxic waste released post mining.Hence,the rising demand for rare earths and their far reaching electronic applications necessitates an effective strategy to recover the REEs from more viable sources.In this work,the graphene oxide-Aspergillus niger spores(GO-A.niger spores) blend was utilized for adsorptive recovery of a precious rare earth Eu(Ⅲ) and the adsorption variables like pH of the medium,adsorbent dosage,sorption kinetics,thermodynamics,and isotherm were optimized for the developed bioso rbent.The adsorption process suits the Langmuir isotherm model with a maximum adsorption capacity of 147.3 mg/g.The pseudo-second-order kinetics is a perfect fit to describe the adsorption process.The results obtained through the Van’t Hoff plot show negative free energy change(ΔG^(0)) which implies the spontaneity of the adsorption process.The negative standard enthalpy change(ΔH^(0)) values show that the nature of the adsorption process is exothermic.The analytical characterizations including Fourier transform infrared spectroscopy(FTIR),Raman,X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),Brunauer-Emmett-Teller(BET),thermal gravimetric analysis(TGA),and scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX) were employed to study the biosorbent.The features of GO-A.niger spores biosorbent were applied to recover Eu(Ⅲ) from real samples such as fluorescent lamp phosphor,red phosphor powder,and a simulated radioactive waste solution.
基金supported by the Climate Change Response Project (NRF-2019M1A2A2065612)the Brainlink Project (NRF2022H1D3A3A01081140)+3 种基金the NRF-2021R1A4A3027878 and the No. RS-2023-00212273 funded by the Ministry of Science and ICT of Korea via National Research Foundationresearch funds from Hanhwa Solutions Chemicals (1.220029.01)UNIST (1.190013.01)supported by the Institute for Basic Science (IBS-R019-D1)。
文摘Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to its low solubility in aqueous electrolytes.Herein,we propose phosphorus-activated Cu electrocatalysts to generate electron-deficient Cu sites on the catalyst surface to promote the adsorption of N_(2) molecules.The eNRR system is further modified using a gas diffusion electrode(GDE) coated with polytetrafluoroethylene(PTFE) to form an effective three-phase boundary of liquid water-gas N_(2)-solid catalyst to facilitate easy access of N_(2) to the catalytic sites.As a result,the new catalyst in the flow-type cell records a Faradaic efficiency of 13.15% and an NH_(3) production rate of 7.69 μg h^(-1) cm^(-2) at-0.2 V_(RHE),which represent 3.56 and 59.2 times increases from those obtained with a pristine Cu electrode in a typical electrolytic cell.This work represents a successful demonstration of dual modification strategies;catalyst modification and N_(2) supplying system engineering,and the results would provide a useful platform for further developments of electrocatalysts and reaction systems.