BACKGROUND In the diagnosis and treatment of cancer,it is important to evaluate the components of psychological adjustment.Considering the key role of nurses in providing care to patients,it is important to evaluate p...BACKGROUND In the diagnosis and treatment of cancer,it is important to evaluate the components of psychological adjustment.Considering the key role of nurses in providing care to patients,it is important to evaluate patients,to determine highrisk patients and to use tools with acceptable validity and reliability to develop care plans.AIM To analyze the Turkish validity and reliability of The Psychological Impact of Cancer Scale(PICS).METHODS This methodological study was conducted with 257 cancer patients admitted to the oncology-haematology clinic and outpatient clinic of a University Hospital between February and October 2021.After the translation process of the scale,content and construct validity were conducted.Exploratory factor analysis(EFA)and confirmatory factor analysis(CFA)was examined with construct validity,while item analyses and internal consistency analysis were conducted for reliability.RESULTS Analyses and assessment results showed that the content validity index of the scale was 0.96.In the exploratory factor analysis of the Turkish adaptation study,total variance rate explained was found as 84.98%.Factor loads of all items were between 0.82 and 0.94.It was found that Cronbach Alpha values were between 0.860 and 0.930 and total scale Cronbach Alpha value was 0.844.EFA and CFA showed that Turkish form of 12-item and 4-factor.The Psychological Impact of Cancer Scale was confirmed with no changes to the original scale.CFA revealed good fit indices.CONCLUSION Turkish PICS is a valid and reliable measurement tool for the evaluation of individual’s psychological response to cancer diagnosis and treatment and for being used in clinical practice.展开更多
Introduction: A new electromechanical instrument has been developed to measure relative dorsal mobility of the first ray in an objective and reliable way by simulating ground reaction forces during gait. This device e...Introduction: A new electromechanical instrument has been developed to measure relative dorsal mobility of the first ray in an objective and reliable way by simulating ground reaction forces during gait. This device equally applies a standardized, electronically controlled, and precise force under the first metatarsal head M1 as well as under the heads of the lesser metatarsals M2 to M5. The relative dorsal mobility between these two bearings is then measured. The purpose of this study is to assess the intra- and inter-examiners reliabilities of the measurements obtained with this device. Methods: The protocol included two examiners and 36 feet (18 volunteers with healthy feet and no history of forefoot disorders). A total of nine measurements were performed on each foot separated into three sets of three trials for the assessment of inter-rater and intra-rater reliability. For this purpose, the interclass correlation coefficient (ICC), the error of measurement (SEM) and the Bland and Altman (B&A) graphical analysis were computed. Results: Excellent ICC values (≥0.91) were obtained with the novel device for inter-rater and intra-rater reliability when using the FRRM calculation. The B&A analysis presented a bias between examiners of -0.25 mm ranging from -1.66 to 1.18 mm. Conclusion: This study demonstrated the capability of the developed device to reliably measure the relative dorsal mobility of the first ray of the foot. This is a promising first step for further studies to better understand, qualify and quantify first ray hypermobility.展开更多
Quayside container crane is a kind of huge dimension steel structure,which is the major equipment used for handling container at modern ports.With the aim to validate the safety and reliability of the crane under seis...Quayside container crane is a kind of huge dimension steel structure,which is the major equipment used for handling container at modern ports.With the aim to validate the safety and reliability of the crane under seismic loads,besides conventional analysis,elastic-plastic time history analysis under rare seismic intensity is carried out.An ideal finite element(FEM) elastic-plastic mechanical model of the quayside container crane is presented by using ANSYS codes.Furthermore,according to elastic-plastic time history analysis theory,deformation,stress and damage pattern of the structure under rare seismic intensity are investigated.Based on the above analysis,the established reliability model according to the reliability theory,together with seismic reliability analysis based on Monte-Carlo simulation is applied to practical analysis.The results show that the overall structure of the quayside container crane is generally unstable under rare seismic intensity,and the structure needs to be reinforced.展开更多
In the light of the Grey characters of reliability on a mechanical transmission system, Grey problems that could assist in the study on mechanical transmission system were analyzed. For example, the factors of time fu...In the light of the Grey characters of reliability on a mechanical transmission system, Grey problems that could assist in the study on mechanical transmission system were analyzed. For example, the factors of time function,the factors of environment and the factors of people have some relationships with the system in this paper. And then, the methods and procedures, which were based upon the theory of Grey system, were elaborated.展开更多
Relative flexibility between the hamstring and lumbar extensor muscles, which can be evaluated using lumbopelvic curvature during active knee extension in sitting, can sometimes be assessed in physical therapy. Howeve...Relative flexibility between the hamstring and lumbar extensor muscles, which can be evaluated using lumbopelvic curvature during active knee extension in sitting, can sometimes be assessed in physical therapy. However, reliability for its quantitative measure has not been established yet and its establishment was the aim of the current study. Twenty-seven individuals with clinically tight hamstring muscles were recruited. On two separate sessions, the lumbopelvic curvature was evaluated in sitting when the right knee was moved from 90° flexion to 10° flexion on 15 occasions using a flexible ruler by two examiners on Day 1 and one on Day 2. Lines drawn tangential to the lumbopelvic curvature were traced at T12 and S2 vertebral levels and the angle between the two vertical lines was calculated. Using Day 1 data, the minimum number of repetitions and inter-examiner reliability were assessed. Inter-session reliability was also examined. As a result, there was no statistical difference (P?> 0.05) in the mean absolute difference between the mean value of N-1 and N repetitions (6 ≤ N ≤ 15) in the lumbopelvic curvature angle, indicating that five was considered the minimum number of repetitions. Intraclass correlation coefficient (ICC)(1, 5)?for the inter-session reliability and ICC(2, 5)?for the inter-examiner reliability was 0.97 and 0.93, respectively, indicating excellent reliability. The measure for the lumbopelvic curvature during active knee extension in sitting, which was established in the current study, will be a foundation for further research regarding the relative flexibility of the lumbar and adjunct regions.展开更多
AIM: To assess the inter-observer agreement and reliability as well as intra-observer repeatability for lacrimal scintigraphy(LS) reports with and without considering the irrigation test results.METHODS: A prospective...AIM: To assess the inter-observer agreement and reliability as well as intra-observer repeatability for lacrimal scintigraphy(LS) reports with and without considering the irrigation test results.METHODS: A prospective, observational, cross sectional study. Two masked clinicians(lacrimal surgeon and nuclear medicine specialist) independently reported 100 LS images(50 patients of >6 years of age with unilateral anophthalmic socket) in a university hospital. The lacrimal surgeon performed a diagnostic irrigation test and repeated the report of the same LS images 2 y after the first report(intra-observer agreement). A weighted Kappa analysis was performed to determine inter-observer agreement and reliability as well as intra-observer repeatability for the type(normal, partial and complete obstruction) and location(presac, preduct, and intraduct) of the obstruction. Subgroup analysis was also performed with consideration of irrigation test results. RESULTS: A significantly moderate agreement was found between lacrimal surgeon and nuclear medicine specialist for both the type(Kappa=0.55) and location(Kappa=0.48) of obstruction. Agreement values were higher for the type(Kappa=0.61 vs 0.41) and location(Kappa=0.56 vs 0.31) of obstruction in cases with normal than abnormal irrigation test. Strong and significant intraobserver(lacrimal surgeon) repeatability was found for both the type(Kappa=0.66) and location(Kappa=0.69) of obstruction. LS showed no to slight reliability based on irrigation test.CONCLUSION: A moderate agreement is found between lacrimal surgeon and nuclear medicine specialist regarding the interpretation of LS suggesting the importance ofconsensus groups among nuclear medicine specialists and lacrimal surgeons to create a common language for interpretation of LS. Intra-observer repeatability is strong for the lacrimal surgeon.展开更多
Risk precontrol management system of coal mines safety( RPMSCS) provides a set of preventive safety management strategy for high-risk coal industries, which has captured extensive attentions. Fundamentally,there are s...Risk precontrol management system of coal mines safety( RPMSCS) provides a set of preventive safety management strategy for high-risk coal industries, which has captured extensive attentions. Fundamentally,there are several membership systems with subsystems in the management system, and the subsystem reliability has an important influence on the management system performance. Through analyzing the structure characteristics of the management system,the phase type distribution was employed to analyze its subsystem reliability by considering repair process and three states including working,fail-abnormal,and fail-emergency states. The reliability indices of the subsystem were derived respectively,including the probabilities that the subsystem in three states,mean time to the first failure, mean time to first failemergency,mean working time to first fail-emergency,and mean maintenance time to the first fail-emergency, are derived respectively. The probabilities of the membership systems and the management system in three states were also derived. Some numerical examples were used to show the procedures. The result is important for better understanding the management system operation and improving its operational performance from the respect of system reliability.展开更多
Background: It has been suggested that hypertrophic eminence on the medial head of the first metatarsal is a component of the patho-anatomy of hallux valgus. However, research findings in this area are inconsistent, p...Background: It has been suggested that hypertrophic eminence on the medial head of the first metatarsal is a component of the patho-anatomy of hallux valgus. However, research findings in this area are inconsistent, possibly due to differences in methods in identifying and measuring the medial eminence. To date, reliability of any method of measurement has not been reported. The purpose of this study was to determine the reliability of measurement of the medial eminence on medial oblique and dorsoplantar radiographs using a previously described geometric technique. Methods: To evaluate the reliability of a method of measurement of the medial eminence of the first metatarsal duplicate standardized dorsoplantar and medial oblique radiographs were taken of one foot of 15 subjects. The feet included both rectus feet and subjects with hallux valgus. The medial eminence was measured on the digital images using Inteleviewer 2.5 (Intelerad medical systems incorporated, Montreal, Quebec) software. Observer 1 measured one randomly selected image from each subject to determine inter-observer reliability. Observer 2 measured all images to determine the overall intraobserver reliability. Reliability was calculated using intra-class correlation coefficients (ICC). Results: The mean projection of the medial eminence ranged from 0.39 to 0.44 cm in both views. The ICCs were calculated for the dorsoplantar view and the 2 medial oblique view measures between observers. They ranged from 0.76 intra-rater and 0.86 interrater in the dorsoplantar view to 0.80 intra-rater and 0.90 inter-rater in the medial oblique view indicating good reliability in all measures. The average of the 4 oblique views also showed a high level of reliability with a coefficient of 0.96. Conclusions: The medial eminence can be reliably measured in the medial oblique and dorsoplantar view using the described technique. The medial oblique and the dorsoplantar views are valuable and reliable projections for visualising the dorso medial aspect of the first metatarsal.展开更多
Objective To study the objectivity and reliability of needle electromyography and nerve conduction for detection of musculus extensor digitorum brevis strength, which may provide a basis for establishing a quantitativ...Objective To study the objectivity and reliability of needle electromyography and nerve conduction for detection of musculus extensor digitorum brevis strength, which may provide a basis for establishing a quantitative detection of muscle strength in forensic clinical study. Methods Forty-four healthy people were enrolled as the subjects, and during toe dorsiflexion, the following items including needle electromyography indexes, motor unit potential(MUP) amplitude, MUP count, recruitment reaction type, and nerve conduction detection indexes, compound muscle action potential(CMAP) amplitude, CMAP latent period and motor nerve conduction velocity(MNCV), were simultaneously detected under the cooperation and disguise condition. Results Under the cooperation condition, regardless of the same operator or different operators, there were good test-retest reliabilities in MUP amplitude, CMAP amplitude, CMAP latent period and MNCV, while there were normal test-retest reliabilities in MUP count and recruitment reaction type and the repeatability of the same operator was slightly better than the repeatability between different operators. Under the disguise condition, test-retest reliabilities of MUP amplitude, CMAP amplitude, CMAP latent period and MNCV were relatively high, while test-retest reliabilities of MUP count and recruitment reaction type were relatively low. Conclusion There are good test-retest reliabilities in MUP amplitude, CMAP amplitude, CMAP latent period and MNCV, which can be conducive to comparison between different operators and results at various times; MUP count and recruitment reaction type, which can be easily affected by subjectivity of operators and examinees, can be used to differentiate whether an examinee disguises or not. The indexes used to objectively judge muscle strength remain to be further investigated.展开更多
The method of reliability analysis of mineral reserve estimation, mining construction, mining technological system and surface mine investment in mine design is discussed in this paper. On the basis of this method, th...The method of reliability analysis of mineral reserve estimation, mining construction, mining technological system and surface mine investment in mine design is discussed in this paper. On the basis of this method, the questions, such as "whether the planned production and predicted economic effectiveness could be obtained", can be answered, and corresponding measures can be taken.展开更多
In this paper,the system on display panel(SoDP)architecture,the primary stage of heterogeneous integration system in display(HiSID),is introduced for the first time.In this architecture,the driving components of displ...In this paper,the system on display panel(SoDP)architecture,the primary stage of heterogeneous integration system in display(HiSID),is introduced for the first time.In this architecture,the driving components of display,which are supposed to be on the display flexible print circuit(FPC)in traditional architecture,are innovatively integrated onto the backside of display panel.Through the SoDP architecture,the simulated impact strain in the panel fan-out region can decrease about 30%compared to the traditional architecture,and SoDP provides more the 10 mm extra space in the in-plane Y-direction for holding a larger battery.Also,the SoDP is compatible with the current organic laser emitted diode(OLED)and system in package(SiP)processes.Besides the primary stage,this paper also presents a comprehensive and extensive analysis on the challenges of the manufacturability for the advanced stage of HiSID from four key technologies perspectives:device miniaturization,massive manufacturing,driving technology,and advanced heterogeneous integration.展开更多
The detrimental effect of imprint,which can cause misreading problem,has hindered the application of ferroelectric HfO_(2).In this work,we present results of a comprehensive reliability evaluation of Hf_(0.5)Zr_(0.5)O...The detrimental effect of imprint,which can cause misreading problem,has hindered the application of ferroelectric HfO_(2).In this work,we present results of a comprehensive reliability evaluation of Hf_(0.5)Zr_(0.5)O_(2)-based ferroelectric random access memory.The influence of imprint on the retention and endurance is demonstrated.Furthermore,a solution in circuity is pro-posed to effectively solve the misreading problem caused by imprint.展开更多
Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs s...Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs suffer from having a higher volume,current leakage,complex connections,and difficulty in gas sealing.To solve these problems,Rolls-Royce has fabricated a simple design by stacking cells in series on an insulating porous support,resulting in the tubular segmented-in-series solid oxide fuel cells(SIS-SOFCs),which achieved higher output voltage.This work systematically reviews recent advances in the structures,preparation methods,perform-ances,and stability of tubular SIS-SOFCs in experimental and numerical studies.Finally,the challenges and future development of tubular SIS-SOFCs are also discussed.The findings of this work can help guide the direction and inspire innovation of future development in this field.展开更多
Background: The prevalence of both atrial fibrillation (FA) and diabetes mellitus (DM) is increasing and they often occur together and constitute a high risk of thrombosis. Rivaroxaban is a Factor Xa inhibitor with a ...Background: The prevalence of both atrial fibrillation (FA) and diabetes mellitus (DM) is increasing and they often occur together and constitute a high risk of thrombosis. Rivaroxaban is a Factor Xa inhibitor with a rapid onset and disappearance of action after oral administration;it acts by inhibiting the active form of the coagulation factor. In order to reflect the effect of the action of Rivaroxaban, we used the prothrombin time (PT);however, it′s not the most accurate, but it is the one available in our community. Methods: This was a prospective, randomized, analyst-blinded, parallel group clinical study to verify the efficacy of Rivaroxaban Leti 20 mg (RL) (12 volunteers vs Rivaroxaban Bayer 20 mg (RB) (13 volunteers). The variables were determination of PT and Partial Thromboplastin Time (aPTT) at baseline and at 24, 48 and 72 hours after administering a daily dose of 20 mg for three days. The determination was carried out with the IDG method (Integrated Diagnostics Group Sanzay Corporation) with an International Sensitivity Index (ISI) of 1.17 PT and aPTT were taken before the first dose, and then, every day during the next 3 days, three hours after the ingestion of their daily dose at 7 am. Results: The 25 healthy volunteers were similar in age, BMI, and SBP/DBP level with a greater number of men in the Bayer group. The efficacy of rivaroxaban was similar in both groups with prolongation of PTT to the 2nd day of treatment with PT, and percentage changes from baseline (14.46 ± 0.97 for RB vs 14.17 ± 0.94 RL p: 0.45), PTT results and percentage changes from the base (RB: 34 ± 4.53 RL: 33.46 ± 2.82). The safety of rivaroxaban was good in both groups with no serious adverse events. The equivalence in the logarithmically transformed PT result (ln) on day two, Mean and CI (90%) 99.2 (94.4-104) and 100 (99.5-100.8);neither the means nor the 90% confidence intervals of the PT variable transformed logarithmically to ensure its normality, were far from the 80%-125% allowed for declaration of similarity. Conclusion: The test formulation Rivaroxaban Asarap<sup>?</sup> 20 mg, manufactured by Leti Laboratories, is interchangeable or bioequivalent in clinical and laboratory response to the reference formulation Xarelto<sup>?</sup> manufactured by Bayer Laboratories.展开更多
The reliability of a network is an important indicator for maintaining communication and ensuring its stable operation. Therefore, the assessment of reliability in underlying interconnection networks has become an inc...The reliability of a network is an important indicator for maintaining communication and ensuring its stable operation. Therefore, the assessment of reliability in underlying interconnection networks has become an increasingly important research issue. However, at present, the reliability assessment of many interconnected networks is not yet accurate,which inevitably weakens their fault tolerance and diagnostic capabilities. To improve network reliability,researchers have proposed various methods and strategies for precise assessment. This paper introduces a novel family of interconnection networks called general matching composed networks(gMCNs), which is based on the common characteristics of network topology structure. After analyzing the topological properties of gMCNs, we establish a relationship between super connectivity and conditional diagnosability of gMCNs. Furthermore, we assess the reliability of g MCNs, and determine the conditional diagnosability of many interconnection networks.展开更多
The escalating need for reliability analysis(RA)and reliability-based design optimization(RBDO)within engineering challenges has prompted the advancement of saddlepoint approximationmethods(SAM)tailored for such probl...The escalating need for reliability analysis(RA)and reliability-based design optimization(RBDO)within engineering challenges has prompted the advancement of saddlepoint approximationmethods(SAM)tailored for such problems.This article offers a detailed overview of the general SAM and summarizes the method characteristics first.Subsequently,recent enhancements in the SAM theoretical framework are assessed.Notably,the mean value first-order saddlepoint approximation(MVFOSA)bears resemblance to the conceptual framework of the mean value second-order saddlepoint approximation(MVSOSA);the latter serves as an auxiliary approach to the former.Their distinction is rooted in the varying expansion orders of the performance function as implemented through the Taylor method.Both the saddlepoint approximation and third-moment(SATM)and saddlepoint approximation and fourth-moment(SAFM)strategies model the cumulant generating function(CGF)by leveraging the initial random moments of the function.Although their optimal application domains diverge,each method consistently ensures superior relative precision,enhanced efficiency,and sustained stability.Every method elucidated is exemplified through pertinent RA or RBDO scenarios.By juxtaposing them against alternative strategies,the efficacy of these methods becomes evident.The outcomes proffered are subsequently employed as a foundation for contemplating prospective theoretical and practical research endeavors concerning SAMs.The main purpose and value of this article is to review the SAM and reliability-related issues,which can provide some reference and inspiration for future research scholars in this field.展开更多
This paper proposes a multi-material topology optimization method based on the hybrid reliability of the probability-ellipsoid model with stress constraint for the stochastic uncertainty and epistemic uncertainty of m...This paper proposes a multi-material topology optimization method based on the hybrid reliability of the probability-ellipsoid model with stress constraint for the stochastic uncertainty and epistemic uncertainty of mechanical loads in optimization design.The probabilistic model is combined with the ellipsoidal model to describe the uncertainty of mechanical loads.The topology optimization formula is combined with the ordered solid isotropic material with penalization(ordered-SIMP)multi-material interpolation model.The stresses of all elements are integrated into a global stress measurement that approximates the maximum stress using the normalized p-norm function.Furthermore,the sequential optimization and reliability assessment(SORA)is applied to transform the original uncertainty optimization problem into an equivalent deterministic topology optimization(DTO)problem.Stochastic response surface and sparse grid technique are combined with SORA to get accurate information on the most probable failure point(MPP).In each cycle,the equivalent topology optimization formula is updated according to the MPP information obtained in the previous cycle.The adjoint variable method is used for deriving the sensitivity of the stress constraint and the moving asymptote method(MMA)is used to update design variables.Finally,the validity and feasibility of the method are verified by the numerical example of L-shape beam design,T-shape structure design,steering knuckle,and 3D T-shaped beam.展开更多
A non-probabilistic reliability topology optimization method is proposed based on the aggregation function and matrix multiplication.The expression of the geometric stiffness matrix is derived,the finite element linea...A non-probabilistic reliability topology optimization method is proposed based on the aggregation function and matrix multiplication.The expression of the geometric stiffness matrix is derived,the finite element linear buckling analysis is conducted,and the sensitivity solution of the linear buckling factor is achieved.For a specific problem in linear buckling topology optimization,a Heaviside projection function based on the exponential smooth growth is developed to eliminate the gray cells.The aggregation function method is used to consider the high-order eigenvalues,so as to obtain continuous sensitivity information and refined structural design.With cyclic matrix programming,a fast topology optimization method that can be used to efficiently obtain the unit assembly and sensitivity solution is conducted.To maximize the buckling load,under the constraint of the given buckling load,two types of topological optimization columns are constructed.The variable density method is used to achieve the topology optimization solution along with the moving asymptote optimization algorithm.The vertex method and the matching point method are used to carry out an uncertainty propagation analysis,and the non-probability reliability topology optimization method considering buckling responses is developed based on the transformation of non-probability reliability indices based on the characteristic distance.Finally,the differences in the structural topology optimization under different reliability degrees are illustrated by examples.展开更多
In time-variant reliability problems,there are a lot of uncertain variables from different sources.Therefore,it is important to consider these uncertainties in engineering.In addition,time-variant reliability problems...In time-variant reliability problems,there are a lot of uncertain variables from different sources.Therefore,it is important to consider these uncertainties in engineering.In addition,time-variant reliability problems typically involve a complexmultilevel nested optimization problem,which can result in an enormous amount of computation.To this end,this paper studies the time-variant reliability evaluation of structures with stochastic and bounded uncertainties using a mixed probability and convex set model.In this method,the stochastic process of a limit-state function with mixed uncertain parameters is first discretized and then converted into a timeindependent reliability problem.Further,to solve the double nested optimization problem in hybrid reliability calculation,an efficient iterative scheme is designed in standard uncertainty space to determine the most probable point(MPP).The limit state function is linearized at these points,and an innovative random variable is defined to solve the equivalent static reliability analysis model.The effectiveness of the proposed method is verified by two benchmark numerical examples and a practical engineering problem.展开更多
文摘BACKGROUND In the diagnosis and treatment of cancer,it is important to evaluate the components of psychological adjustment.Considering the key role of nurses in providing care to patients,it is important to evaluate patients,to determine highrisk patients and to use tools with acceptable validity and reliability to develop care plans.AIM To analyze the Turkish validity and reliability of The Psychological Impact of Cancer Scale(PICS).METHODS This methodological study was conducted with 257 cancer patients admitted to the oncology-haematology clinic and outpatient clinic of a University Hospital between February and October 2021.After the translation process of the scale,content and construct validity were conducted.Exploratory factor analysis(EFA)and confirmatory factor analysis(CFA)was examined with construct validity,while item analyses and internal consistency analysis were conducted for reliability.RESULTS Analyses and assessment results showed that the content validity index of the scale was 0.96.In the exploratory factor analysis of the Turkish adaptation study,total variance rate explained was found as 84.98%.Factor loads of all items were between 0.82 and 0.94.It was found that Cronbach Alpha values were between 0.860 and 0.930 and total scale Cronbach Alpha value was 0.844.EFA and CFA showed that Turkish form of 12-item and 4-factor.The Psychological Impact of Cancer Scale was confirmed with no changes to the original scale.CFA revealed good fit indices.CONCLUSION Turkish PICS is a valid and reliable measurement tool for the evaluation of individual’s psychological response to cancer diagnosis and treatment and for being used in clinical practice.
文摘Introduction: A new electromechanical instrument has been developed to measure relative dorsal mobility of the first ray in an objective and reliable way by simulating ground reaction forces during gait. This device equally applies a standardized, electronically controlled, and precise force under the first metatarsal head M1 as well as under the heads of the lesser metatarsals M2 to M5. The relative dorsal mobility between these two bearings is then measured. The purpose of this study is to assess the intra- and inter-examiners reliabilities of the measurements obtained with this device. Methods: The protocol included two examiners and 36 feet (18 volunteers with healthy feet and no history of forefoot disorders). A total of nine measurements were performed on each foot separated into three sets of three trials for the assessment of inter-rater and intra-rater reliability. For this purpose, the interclass correlation coefficient (ICC), the error of measurement (SEM) and the Bland and Altman (B&A) graphical analysis were computed. Results: Excellent ICC values (≥0.91) were obtained with the novel device for inter-rater and intra-rater reliability when using the FRRM calculation. The B&A analysis presented a bias between examiners of -0.25 mm ranging from -1.66 to 1.18 mm. Conclusion: This study demonstrated the capability of the developed device to reliably measure the relative dorsal mobility of the first ray of the foot. This is a promising first step for further studies to better understand, qualify and quantify first ray hypermobility.
基金supported by National High Technology Research and Development Program 863 Plan (No. 2009AA043000)
文摘Quayside container crane is a kind of huge dimension steel structure,which is the major equipment used for handling container at modern ports.With the aim to validate the safety and reliability of the crane under seismic loads,besides conventional analysis,elastic-plastic time history analysis under rare seismic intensity is carried out.An ideal finite element(FEM) elastic-plastic mechanical model of the quayside container crane is presented by using ANSYS codes.Furthermore,according to elastic-plastic time history analysis theory,deformation,stress and damage pattern of the structure under rare seismic intensity are investigated.Based on the above analysis,the established reliability model according to the reliability theory,together with seismic reliability analysis based on Monte-Carlo simulation is applied to practical analysis.The results show that the overall structure of the quayside container crane is generally unstable under rare seismic intensity,and the structure needs to be reinforced.
基金the Natural Science Foundation of China and the scientific research fund of the Education Bureau of Hunan Province.
文摘In the light of the Grey characters of reliability on a mechanical transmission system, Grey problems that could assist in the study on mechanical transmission system were analyzed. For example, the factors of time function,the factors of environment and the factors of people have some relationships with the system in this paper. And then, the methods and procedures, which were based upon the theory of Grey system, were elaborated.
文摘Relative flexibility between the hamstring and lumbar extensor muscles, which can be evaluated using lumbopelvic curvature during active knee extension in sitting, can sometimes be assessed in physical therapy. However, reliability for its quantitative measure has not been established yet and its establishment was the aim of the current study. Twenty-seven individuals with clinically tight hamstring muscles were recruited. On two separate sessions, the lumbopelvic curvature was evaluated in sitting when the right knee was moved from 90° flexion to 10° flexion on 15 occasions using a flexible ruler by two examiners on Day 1 and one on Day 2. Lines drawn tangential to the lumbopelvic curvature were traced at T12 and S2 vertebral levels and the angle between the two vertical lines was calculated. Using Day 1 data, the minimum number of repetitions and inter-examiner reliability were assessed. Inter-session reliability was also examined. As a result, there was no statistical difference (P?> 0.05) in the mean absolute difference between the mean value of N-1 and N repetitions (6 ≤ N ≤ 15) in the lumbopelvic curvature angle, indicating that five was considered the minimum number of repetitions. Intraclass correlation coefficient (ICC)(1, 5)?for the inter-session reliability and ICC(2, 5)?for the inter-examiner reliability was 0.97 and 0.93, respectively, indicating excellent reliability. The measure for the lumbopelvic curvature during active knee extension in sitting, which was established in the current study, will be a foundation for further research regarding the relative flexibility of the lumbar and adjunct regions.
文摘AIM: To assess the inter-observer agreement and reliability as well as intra-observer repeatability for lacrimal scintigraphy(LS) reports with and without considering the irrigation test results.METHODS: A prospective, observational, cross sectional study. Two masked clinicians(lacrimal surgeon and nuclear medicine specialist) independently reported 100 LS images(50 patients of >6 years of age with unilateral anophthalmic socket) in a university hospital. The lacrimal surgeon performed a diagnostic irrigation test and repeated the report of the same LS images 2 y after the first report(intra-observer agreement). A weighted Kappa analysis was performed to determine inter-observer agreement and reliability as well as intra-observer repeatability for the type(normal, partial and complete obstruction) and location(presac, preduct, and intraduct) of the obstruction. Subgroup analysis was also performed with consideration of irrigation test results. RESULTS: A significantly moderate agreement was found between lacrimal surgeon and nuclear medicine specialist for both the type(Kappa=0.55) and location(Kappa=0.48) of obstruction. Agreement values were higher for the type(Kappa=0.61 vs 0.41) and location(Kappa=0.56 vs 0.31) of obstruction in cases with normal than abnormal irrigation test. Strong and significant intraobserver(lacrimal surgeon) repeatability was found for both the type(Kappa=0.66) and location(Kappa=0.69) of obstruction. LS showed no to slight reliability based on irrigation test.CONCLUSION: A moderate agreement is found between lacrimal surgeon and nuclear medicine specialist regarding the interpretation of LS suggesting the importance ofconsensus groups among nuclear medicine specialists and lacrimal surgeons to create a common language for interpretation of LS. Intra-observer repeatability is strong for the lacrimal surgeon.
文摘Risk precontrol management system of coal mines safety( RPMSCS) provides a set of preventive safety management strategy for high-risk coal industries, which has captured extensive attentions. Fundamentally,there are several membership systems with subsystems in the management system, and the subsystem reliability has an important influence on the management system performance. Through analyzing the structure characteristics of the management system,the phase type distribution was employed to analyze its subsystem reliability by considering repair process and three states including working,fail-abnormal,and fail-emergency states. The reliability indices of the subsystem were derived respectively,including the probabilities that the subsystem in three states,mean time to the first failure, mean time to first failemergency,mean working time to first fail-emergency,and mean maintenance time to the first fail-emergency, are derived respectively. The probabilities of the membership systems and the management system in three states were also derived. Some numerical examples were used to show the procedures. The result is important for better understanding the management system operation and improving its operational performance from the respect of system reliability.
文摘Background: It has been suggested that hypertrophic eminence on the medial head of the first metatarsal is a component of the patho-anatomy of hallux valgus. However, research findings in this area are inconsistent, possibly due to differences in methods in identifying and measuring the medial eminence. To date, reliability of any method of measurement has not been reported. The purpose of this study was to determine the reliability of measurement of the medial eminence on medial oblique and dorsoplantar radiographs using a previously described geometric technique. Methods: To evaluate the reliability of a method of measurement of the medial eminence of the first metatarsal duplicate standardized dorsoplantar and medial oblique radiographs were taken of one foot of 15 subjects. The feet included both rectus feet and subjects with hallux valgus. The medial eminence was measured on the digital images using Inteleviewer 2.5 (Intelerad medical systems incorporated, Montreal, Quebec) software. Observer 1 measured one randomly selected image from each subject to determine inter-observer reliability. Observer 2 measured all images to determine the overall intraobserver reliability. Reliability was calculated using intra-class correlation coefficients (ICC). Results: The mean projection of the medial eminence ranged from 0.39 to 0.44 cm in both views. The ICCs were calculated for the dorsoplantar view and the 2 medial oblique view measures between observers. They ranged from 0.76 intra-rater and 0.86 interrater in the dorsoplantar view to 0.80 intra-rater and 0.90 inter-rater in the medial oblique view indicating good reliability in all measures. The average of the 4 oblique views also showed a high level of reliability with a coefficient of 0.96. Conclusions: The medial eminence can be reliably measured in the medial oblique and dorsoplantar view using the described technique. The medial oblique and the dorsoplantar views are valuable and reliable projections for visualising the dorso medial aspect of the first metatarsal.
文摘Objective To study the objectivity and reliability of needle electromyography and nerve conduction for detection of musculus extensor digitorum brevis strength, which may provide a basis for establishing a quantitative detection of muscle strength in forensic clinical study. Methods Forty-four healthy people were enrolled as the subjects, and during toe dorsiflexion, the following items including needle electromyography indexes, motor unit potential(MUP) amplitude, MUP count, recruitment reaction type, and nerve conduction detection indexes, compound muscle action potential(CMAP) amplitude, CMAP latent period and motor nerve conduction velocity(MNCV), were simultaneously detected under the cooperation and disguise condition. Results Under the cooperation condition, regardless of the same operator or different operators, there were good test-retest reliabilities in MUP amplitude, CMAP amplitude, CMAP latent period and MNCV, while there were normal test-retest reliabilities in MUP count and recruitment reaction type and the repeatability of the same operator was slightly better than the repeatability between different operators. Under the disguise condition, test-retest reliabilities of MUP amplitude, CMAP amplitude, CMAP latent period and MNCV were relatively high, while test-retest reliabilities of MUP count and recruitment reaction type were relatively low. Conclusion There are good test-retest reliabilities in MUP amplitude, CMAP amplitude, CMAP latent period and MNCV, which can be conducive to comparison between different operators and results at various times; MUP count and recruitment reaction type, which can be easily affected by subjectivity of operators and examinees, can be used to differentiate whether an examinee disguises or not. The indexes used to objectively judge muscle strength remain to be further investigated.
基金This project is supported by the doctorate fund of State Education Commission
文摘The method of reliability analysis of mineral reserve estimation, mining construction, mining technological system and surface mine investment in mine design is discussed in this paper. On the basis of this method, the questions, such as "whether the planned production and predicted economic effectiveness could be obtained", can be answered, and corresponding measures can be taken.
文摘In this paper,the system on display panel(SoDP)architecture,the primary stage of heterogeneous integration system in display(HiSID),is introduced for the first time.In this architecture,the driving components of display,which are supposed to be on the display flexible print circuit(FPC)in traditional architecture,are innovatively integrated onto the backside of display panel.Through the SoDP architecture,the simulated impact strain in the panel fan-out region can decrease about 30%compared to the traditional architecture,and SoDP provides more the 10 mm extra space in the in-plane Y-direction for holding a larger battery.Also,the SoDP is compatible with the current organic laser emitted diode(OLED)and system in package(SiP)processes.Besides the primary stage,this paper also presents a comprehensive and extensive analysis on the challenges of the manufacturability for the advanced stage of HiSID from four key technologies perspectives:device miniaturization,massive manufacturing,driving technology,and advanced heterogeneous integration.
基金This research was supported by the National Key R&D Program of China(Grant No.2022YFB3606900)in part by the National Natural Science of China(Grant No.62004217).
文摘The detrimental effect of imprint,which can cause misreading problem,has hindered the application of ferroelectric HfO_(2).In this work,we present results of a comprehensive reliability evaluation of Hf_(0.5)Zr_(0.5)O_(2)-based ferroelectric random access memory.The influence of imprint on the retention and endurance is demonstrated.Furthermore,a solution in circuity is pro-posed to effectively solve the misreading problem caused by imprint.
基金supported by the National Natural Science Foundation of China (Nos.21701083 and 22179054).
文摘Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs suffer from having a higher volume,current leakage,complex connections,and difficulty in gas sealing.To solve these problems,Rolls-Royce has fabricated a simple design by stacking cells in series on an insulating porous support,resulting in the tubular segmented-in-series solid oxide fuel cells(SIS-SOFCs),which achieved higher output voltage.This work systematically reviews recent advances in the structures,preparation methods,perform-ances,and stability of tubular SIS-SOFCs in experimental and numerical studies.Finally,the challenges and future development of tubular SIS-SOFCs are also discussed.The findings of this work can help guide the direction and inspire innovation of future development in this field.
文摘Background: The prevalence of both atrial fibrillation (FA) and diabetes mellitus (DM) is increasing and they often occur together and constitute a high risk of thrombosis. Rivaroxaban is a Factor Xa inhibitor with a rapid onset and disappearance of action after oral administration;it acts by inhibiting the active form of the coagulation factor. In order to reflect the effect of the action of Rivaroxaban, we used the prothrombin time (PT);however, it′s not the most accurate, but it is the one available in our community. Methods: This was a prospective, randomized, analyst-blinded, parallel group clinical study to verify the efficacy of Rivaroxaban Leti 20 mg (RL) (12 volunteers vs Rivaroxaban Bayer 20 mg (RB) (13 volunteers). The variables were determination of PT and Partial Thromboplastin Time (aPTT) at baseline and at 24, 48 and 72 hours after administering a daily dose of 20 mg for three days. The determination was carried out with the IDG method (Integrated Diagnostics Group Sanzay Corporation) with an International Sensitivity Index (ISI) of 1.17 PT and aPTT were taken before the first dose, and then, every day during the next 3 days, three hours after the ingestion of their daily dose at 7 am. Results: The 25 healthy volunteers were similar in age, BMI, and SBP/DBP level with a greater number of men in the Bayer group. The efficacy of rivaroxaban was similar in both groups with prolongation of PTT to the 2nd day of treatment with PT, and percentage changes from baseline (14.46 ± 0.97 for RB vs 14.17 ± 0.94 RL p: 0.45), PTT results and percentage changes from the base (RB: 34 ± 4.53 RL: 33.46 ± 2.82). The safety of rivaroxaban was good in both groups with no serious adverse events. The equivalence in the logarithmically transformed PT result (ln) on day two, Mean and CI (90%) 99.2 (94.4-104) and 100 (99.5-100.8);neither the means nor the 90% confidence intervals of the PT variable transformed logarithmically to ensure its normality, were far from the 80%-125% allowed for declaration of similarity. Conclusion: The test formulation Rivaroxaban Asarap<sup>?</sup> 20 mg, manufactured by Leti Laboratories, is interchangeable or bioequivalent in clinical and laboratory response to the reference formulation Xarelto<sup>?</sup> manufactured by Bayer Laboratories.
基金supported by National Natural Science Foundation of China (No.62362005)。
文摘The reliability of a network is an important indicator for maintaining communication and ensuring its stable operation. Therefore, the assessment of reliability in underlying interconnection networks has become an increasingly important research issue. However, at present, the reliability assessment of many interconnected networks is not yet accurate,which inevitably weakens their fault tolerance and diagnostic capabilities. To improve network reliability,researchers have proposed various methods and strategies for precise assessment. This paper introduces a novel family of interconnection networks called general matching composed networks(gMCNs), which is based on the common characteristics of network topology structure. After analyzing the topological properties of gMCNs, we establish a relationship between super connectivity and conditional diagnosability of gMCNs. Furthermore, we assess the reliability of g MCNs, and determine the conditional diagnosability of many interconnection networks.
基金funded by the National Natural Science Foundation of China under Grant No.52175130the Sichuan Science and Technology Program under Grants Nos.2022YFQ0087 and 2022JDJQ0024+1 种基金the Guangdong Basic and Applied Basic Research Foundation under Grant No.2022A1515240010the Students Go Abroad for Scientific Research and Internship Funding Program of University of Electronic Science and Technology of China.
文摘The escalating need for reliability analysis(RA)and reliability-based design optimization(RBDO)within engineering challenges has prompted the advancement of saddlepoint approximationmethods(SAM)tailored for such problems.This article offers a detailed overview of the general SAM and summarizes the method characteristics first.Subsequently,recent enhancements in the SAM theoretical framework are assessed.Notably,the mean value first-order saddlepoint approximation(MVFOSA)bears resemblance to the conceptual framework of the mean value second-order saddlepoint approximation(MVSOSA);the latter serves as an auxiliary approach to the former.Their distinction is rooted in the varying expansion orders of the performance function as implemented through the Taylor method.Both the saddlepoint approximation and third-moment(SATM)and saddlepoint approximation and fourth-moment(SAFM)strategies model the cumulant generating function(CGF)by leveraging the initial random moments of the function.Although their optimal application domains diverge,each method consistently ensures superior relative precision,enhanced efficiency,and sustained stability.Every method elucidated is exemplified through pertinent RA or RBDO scenarios.By juxtaposing them against alternative strategies,the efficacy of these methods becomes evident.The outcomes proffered are subsequently employed as a foundation for contemplating prospective theoretical and practical research endeavors concerning SAMs.The main purpose and value of this article is to review the SAM and reliability-related issues,which can provide some reference and inspiration for future research scholars in this field.
基金supported by the National Natural Science Foundation of China(Grant 52175236).
文摘This paper proposes a multi-material topology optimization method based on the hybrid reliability of the probability-ellipsoid model with stress constraint for the stochastic uncertainty and epistemic uncertainty of mechanical loads in optimization design.The probabilistic model is combined with the ellipsoidal model to describe the uncertainty of mechanical loads.The topology optimization formula is combined with the ordered solid isotropic material with penalization(ordered-SIMP)multi-material interpolation model.The stresses of all elements are integrated into a global stress measurement that approximates the maximum stress using the normalized p-norm function.Furthermore,the sequential optimization and reliability assessment(SORA)is applied to transform the original uncertainty optimization problem into an equivalent deterministic topology optimization(DTO)problem.Stochastic response surface and sparse grid technique are combined with SORA to get accurate information on the most probable failure point(MPP).In each cycle,the equivalent topology optimization formula is updated according to the MPP information obtained in the previous cycle.The adjoint variable method is used for deriving the sensitivity of the stress constraint and the moving asymptote method(MMA)is used to update design variables.Finally,the validity and feasibility of the method are verified by the numerical example of L-shape beam design,T-shape structure design,steering knuckle,and 3D T-shaped beam.
基金Project supported by the National Natural Science Foundation of China (Nos.12072007,12072006,12132001,and 52192632)the Ningbo Natural Science Foundation of Zhejiang Province of China (No.202003N4018)the Defense Industrial Technology Development Program of China (Nos.JCKY2019205A006,JCKY2019203A003,and JCKY2021204A002)。
文摘A non-probabilistic reliability topology optimization method is proposed based on the aggregation function and matrix multiplication.The expression of the geometric stiffness matrix is derived,the finite element linear buckling analysis is conducted,and the sensitivity solution of the linear buckling factor is achieved.For a specific problem in linear buckling topology optimization,a Heaviside projection function based on the exponential smooth growth is developed to eliminate the gray cells.The aggregation function method is used to consider the high-order eigenvalues,so as to obtain continuous sensitivity information and refined structural design.With cyclic matrix programming,a fast topology optimization method that can be used to efficiently obtain the unit assembly and sensitivity solution is conducted.To maximize the buckling load,under the constraint of the given buckling load,two types of topological optimization columns are constructed.The variable density method is used to achieve the topology optimization solution along with the moving asymptote optimization algorithm.The vertex method and the matching point method are used to carry out an uncertainty propagation analysis,and the non-probability reliability topology optimization method considering buckling responses is developed based on the transformation of non-probability reliability indices based on the characteristic distance.Finally,the differences in the structural topology optimization under different reliability degrees are illustrated by examples.
基金partially supported by the National Natural Science Foundation of China(52375238)Science and Technology Program of Guangzhou(202201020213,202201020193,202201010399)GZHU-HKUST Joint Research Fund(YH202109).
文摘In time-variant reliability problems,there are a lot of uncertain variables from different sources.Therefore,it is important to consider these uncertainties in engineering.In addition,time-variant reliability problems typically involve a complexmultilevel nested optimization problem,which can result in an enormous amount of computation.To this end,this paper studies the time-variant reliability evaluation of structures with stochastic and bounded uncertainties using a mixed probability and convex set model.In this method,the stochastic process of a limit-state function with mixed uncertain parameters is first discretized and then converted into a timeindependent reliability problem.Further,to solve the double nested optimization problem in hybrid reliability calculation,an efficient iterative scheme is designed in standard uncertainty space to determine the most probable point(MPP).The limit state function is linearized at these points,and an innovative random variable is defined to solve the equivalent static reliability analysis model.The effectiveness of the proposed method is verified by two benchmark numerical examples and a practical engineering problem.