The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, w...The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, which proved that 110-H owned satisfactory adsorption capacity（346.85 mg/g） in optimum conditions, belonging to one of the high adsorption capacity materials. Then, the adsorption and desorption behaviors were investigated by batch studies. The adsorption performance showed high agreement with the Lagergren-first-order model and Langmuir isotherm with thermodynamic adsorption parameters of ΔH= 36.1 k J/mol and ΔS=200 J/（mol·K）. Desorption study revealed that 110-H could be effectively eluted by a low concentration of HCl solution（0.1 mol/L） to regenerate and reuse. Finally, the 110-H and Eu（III） loaded 110-H were characterized by IR spectroscopy and scanning electron microscope（SEM） to analyze the mechanism of adsorption, which proved to be chemisorbed.展开更多
The adsorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR) for Er(Ⅲ) were investigated. The optima adsorption condition of DAAR for Er(Ⅲ) is pH 6.20 in HAc NaAc medium. The sta...The adsorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR) for Er(Ⅲ) were investigated. The optima adsorption condition of DAAR for Er(Ⅲ) is pH 6.20 in HAc NaAc medium. The statically saturated adsorption capacity is 189 mg·g -1 resin at 298 K. The Er (Ⅲ) adsorbed on DAAR can be eluted reaching 100% by 2 mol·L -1 HCl used as eluant. The resin can be regenerated and reused without apparent decreasing of adsorption capacity. The apparent adsorption rate constant is k 298 =1.94×10 -5 s -1 . The apparent activation energy is 24.7 kJ·mol -1 . The adsorption behavior of DAAR for Er(Ⅲ) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change Δ H of DAAR for Er(Ⅲ) is 24.1 kJ·mol -1 . The molar coordination ratio of the functional group of DAAR to Er (Ⅲ) is 3∶1. The adsorption mechanism of DAAR for Er (Ⅲ) was examined by using chemical method and IR spectrometry. The coordination compound is formed between oxygen atoms in the functional group of DAAR and Er(Ⅲ).展开更多
The adsorption behavior and the mechanism of a novel chelate resin, amino methylene phosphonic acid resin(APAR) for Cu(Ⅱ) were investigated. Cu(Ⅱ) was quantitatively adsorbed by APAR in the medium of pH=4 09. The s...The adsorption behavior and the mechanism of a novel chelate resin, amino methylene phosphonic acid resin(APAR) for Cu(Ⅱ) were investigated. Cu(Ⅱ) was quantitatively adsorbed by APAR in the medium of pH=4 09. The statically saturated adsorption capacity is 181 mg/(g resin). Cu(Ⅱ) adsorbed on APAR can be eluted by 1 0-3 0 mol/L HCl. The rate constant is k 298 =5 58×10 -5 s -1 . The adsorption of Cu(Ⅱ) on APAR follows the Freundlich isotherm. The Δ H of the adsorption is 3 91 kJ/mol. The apparent activation energy is E a=21 4 kJ/mol. The coordination molar ratio of APAR to Cu(Ⅱ) is 1/1. It is shown that the nitrogen and the oxygen atoms in the functional group of APAR coordinate to Cu(Ⅱ).展开更多
Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper...Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper catalyst is air stable and can be readily recovered and reused with minimal loss of activity for three runs.展开更多
The sorption behavior of amino methylene phosphonic acid resin (APAR) for In (Ⅲ ) was investigated . Experimental results show that In ( Ⅲ ) adsorbed on APAR can be elated with 2mol · L -1 HCl. The apparent rat...The sorption behavior of amino methylene phosphonic acid resin (APAR) for In (Ⅲ ) was investigated . Experimental results show that In ( Ⅲ ) adsorbed on APAR can be elated with 2mol · L -1 HCl. The apparent rate constant is k29 = 1.50 × 10-5s-1. The sorption behavior of APAR for In ( Ⅲ ) obeys the Freundlich isotherm. The themodynamic parameters of sorption, enthalpy change ()H, free energy change ()G and entropy change ()S of sorption (APAR) for In ( Ⅲ ) are 24.1 kJ·mol-1, -35. 1kJ· mol-1 and 200J· mol-1·K-1 respectively. The coordination molar ratio of the functional group of APAR to In( Ⅲ ) is 2:1. The sorption mechanism of APAR for In( Ⅲ ) was examined by IR spectrometry.展开更多
A convenient and effective Paal-Knorr condensations of 2,5-hexanedione with most amines have been carried out at room temperature under solvent-free condition.Macroporous strongly acidic styrol resin(D001) as a novel,...A convenient and effective Paal-Knorr condensations of 2,5-hexanedione with most amines have been carried out at room temperature under solvent-free condition.Macroporous strongly acidic styrol resin(D001) as a novel,efficient,cost-effective,and reusable solid acid catalyst for the synthesis of pyrroles under the same conditions.The pyrroles were obtained in high yields in short reaction times.展开更多
In（Ⅲ） was quantitatively adsorbed by iminodiacetic acid resin （IDAAR） in the medium of pH = 4.52. The statically saturated sorption capacity of IDAAR is 235.5 mg·g^-1. 1.0 mol·L^-1 HCl can be used as an...In（Ⅲ） was quantitatively adsorbed by iminodiacetic acid resin （IDAAR） in the medium of pH = 4.52. The statically saturated sorption capacity of IDAAR is 235.5 mg·g^-1. 1.0 mol·L^-1 HCl can be used as an eluant. The elution efficiency is 97.9%. The resin can be regenerated and reused without apparent decrease of sorption capacity. The sorption rate constant is k298 = 1.94 × 10-5 s^-1. The apparent sorption activation energy of IDAAR for In（Ⅲ） is 20.1 kJ·mol^-1. The sorption behavior of IDAAR for In（HI） obeys the Freundlich isotherm. The enthalpy change is AH= 17.2 kJ·mol^-1.展开更多
Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc...Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc-NaAc medium.The Ni（Ⅱ）adsorbed on PAR can be eluted by 0.5mal·L^-1 HCl and the elution percentage reaches 96.6%.The resin can be regenerated and reused without abvious decrease in adsorption capacity.The apparent adsorption rate constant is k298=2.6×10^-5s^-1.The adsorption behavior of PAR for Ni（Ⅱ）obeys the Freundllich isotherm.The thermodynamie adsorption parameters.enthalpy change △H,free energy change △G and entropy change △S of PAR for Ni（Ⅱ）are 3.36kJ·mol^-1,-5.47kJ·mol^-1 and 29.6J·mol^-1·K^-1,respectively.The apparent activation energy is Ea=12.2kJ·mol^-1,The molar coordination ratio of the functional group of PAR to Ni（Ⅱ）is about 4：1.The adsorption mechanism of PAR for Ni（Ⅱ）was examined by a chemical method and IR spectrometry.展开更多
The influences of medium pH sorption temperature, sorption time, etc. on thesorption capacity of macroporous Phosphonic acid resin for La3+ were determined Thesorption rate constant was k298 = 7.64×10-5 s-1. The ...The influences of medium pH sorption temperature, sorption time, etc. on thesorption capacity of macroporous Phosphonic acid resin for La3+ were determined Thesorption rate constant was k298 = 7.64×10-5 s-1. The complex ratio of phosphonicgroups of the resin to La3+ was 3:1. The basic sorption parameters were determinedThe sorption mechanism of macroporous phosphonic acid resin for La3+ was examinedby chemical analysis and IR- spectrometry.展开更多
The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium....The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.展开更多
The sorption properties of amino methylene phosphonic resin(APAR) for Ag(Ⅰ) were studied. The amino methylene phosphonic acid resin(APAR) has a good adsorption ability for Ag(Ⅰ) at pH=6.0 in the HAc-NaAc medium. The...The sorption properties of amino methylene phosphonic resin(APAR) for Ag(Ⅰ) were studied. The amino methylene phosphonic acid resin(APAR) has a good adsorption ability for Ag(Ⅰ) at pH=6.0 in the HAc-NaAc medium. The statically saturated adsorption capacity is 272 mg/g resin, Ag(Ⅰ) adsorbed on APAR can be eluted by 5% (NH2)2CS-0.5 mol/L hydrochloric acid quantitatively. The adsorption rate constants determined under various temperatures are k15℃=3.89×10?5 s?1, k25℃=5.93×10?5 s?1, k35℃=7.59×10?5 s?1, k45℃=9.45×10?5 s?1, respectively. The apparent activation energy of adsorption, Ea is 22.8 kJ/mol, the enthalpy change (?H) of sorption is 17.4 kJ/mol. The adsorption mechanism shows that the functional group of APAR coordinates with Ag(Ⅰ) to form coordination bond, the coordination molar ratio of the functional group of APAR to Ag(Ⅰ) is 1∶1.展开更多
The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg&#...The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg·g^(-1)resin and 296 mg·g^(-1)resin at 298 K in HAc-NaAc medium at pH 5.6. Gd(Ⅲ)adsorbed on PAR can be reductively eluted by 0.5～5.0 mol·L^(-1) HCl used as eluant and the elution percentage is up to 94.7% in 1.0 mol·L^(-1) HCl. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=3.96×10^(-5) s^(-1). The adsorption behavior of PAR for Gd(Ⅲ) conforms to the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change △H of PAR for Gd(Ⅲ)is 22.6kJ·mol^(-1). The apparent adsorption activation energy(Ea)of PAR for Gd(Ⅲ)is 5.0 kJ·mol^(-1). The molar coordination ratio of the functional group of PAR to Gd(Ⅲ)is about 3∶1. The adsorption mechanism of PAR for Gd(Ⅲ)was examined by using chemical method and IR spectrometry.展开更多
The adsorption behavior and mechanism of a novel chelate resin, amino methylene phosphonic acid resin (APAR) for Ho(Ⅲ) were investigated. The statically saturated adsorption capacity is 258 mg·g^(-1) resin at 29...The adsorption behavior and mechanism of a novel chelate resin, amino methylene phosphonic acid resin (APAR) for Ho(Ⅲ) were investigated. The statically saturated adsorption capacity is 258 mg·g^(-1) resin at 298 K in HAc-NaAc medium. The Ho(Ⅲ) adsorbed on APAR can be repeatedly eluted by 3.0 mol·L^(-1) HCl and the elution percentage is as high as 95.8%. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=1.14×10^(-5) s^(-1). The adsorption behavior of APAR for Ho(Ⅲ) obeys the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change ΔH of APAR for Ho(Ⅲ) is 11.4 kJ·mol^(-1). The apparent activation energy is E_a=15.8 kJ·mol^(-1). The molar coordination ratio of the functional group of APAR to Ho(Ⅲ) is about 2∶1. The adsorption mechanism of APAR for Ho(Ⅲ) was examined by using chemical method and IR spectrometry.展开更多
The sorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR), for Sm(III) were investigated. The optimal sorption condition of DAAR for Sm(III) is pH=6.0 in HAc-NaAc medium. The stati...The sorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR), for Sm(III) were investigated. The optimal sorption condition of DAAR for Sm(III) is pH=6.0 in HAc-NaAc medium. The statically saturated sorption capacity is 190mg/g resin at 298K. The Sm(III) adsorbed on DAAR can be eluted reaching 100% by 0.5~2.0mol/L HCl used as eluant. The resin can be regenerated and reused without apparent decrease of sorption capacity. The apparent sorption rate constant is k298= 1.96×10-5s-1. The apparent activation energy is 26kJ/mol. The sorption behavior of DAAR for Sm(III) obeys the Freundlich isotherm. The thermodynamic sorption parameters, enthalpy change 腍 of DAAR for Sm(III) is 16.9kJ/mol. The molar coordination ratio of the functional group of DAAR to Sm (III) is 3. The sorption mechanism of DAAR for Sm(III) was examined by using chemical method and IR spectrometry. The coordination bond was formed between oxygen atoms in the functional group of DAAR and Sm(III).展开更多
Sm(III) was quantitatively adsorbed by amino methylene phosphonic acid resin (APAR) in the medium of pH=5.0. The statically saturated sorption capacity is 251mg/g·resin. Sm(III) adsorbed on APAR can be reductivel...Sm(III) was quantitatively adsorbed by amino methylene phosphonic acid resin (APAR) in the medium of pH=5.0. The statically saturated sorption capacity is 251mg/g·resin. Sm(III) adsorbed on APAR can be reductively eluted by 2.0mol/L HCl. The sorption rate constant is k298= 1.35×10-5s-1. The sorption behavior of APAR for Sm(III) obeys the Freundlich isotherm. The enthalpy change △H of sorption is 24.9kJ/mol. The apparent activation energy is Ea=11.7kJ/mol. The sorption mechanism shows that the nitrogen and oxygen atoms of the functional group of APAR coordinated with Sm(III) to form coordination bond.展开更多
The adsorption kinetics and mechanism of a novel chelate resin, macroporous phosphonic acid resin (PAR) for In(III) were investigated. The statically saturated adsorption capacity is 216mg穏-1resin at 298K in HAc-NaAc...The adsorption kinetics and mechanism of a novel chelate resin, macroporous phosphonic acid resin (PAR) for In(III) were investigated. The statically saturated adsorption capacity is 216mg穏-1resin at 298K in HAc-NaAc medium. The apparent adsorption rate constant is k298=4.84?0-5 s-1. The adsorption behavior of PAR for In(III) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change △H, free energy change △G and entropy change △S of PAR for In(III) are 11.5kJ/mol, -12.6kJ/mol and 80.8J/mol稫, respectively. The apparent activation energy is Ea=3.5kJ/mol. The molar coordination ratio of the functional group of PAR to In(III) is about 3∶1.展开更多
Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7...Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7 and D-201 are performed, and all data indicates resin XAD-7 can be used as an effective adsorbent for removing tannic acid during water/wastewater treatment. Furthermore, adsorption thermodynamics studies indicate different adsorption mechanisms for TA on XAD-7 and D-201. FT-IR and solid state 13C-NMR spectroscopy are used to explain the adsorption force between XAD-7 and TA. It suggests that hydrogen bonding is the main adsorption force for TA. Finally, XAD-7＇s adsorption capacity in the presence of different metal ions is investigated, which indicates that heavy metal ions in solutions can decrease the adsorption capacity for TA on ester resin XAD-7.展开更多
Laboratory generated spent bleached liquor from the chlorination, caustic extraction stage of mixed wood kraft pulp processing has been analyzed both qualitatively and quantitatively for various resin & fatty acid...Laboratory generated spent bleached liquor from the chlorination, caustic extraction stage of mixed wood kraft pulp processing has been analyzed both qualitatively and quantitatively for various resin & fatty acids by using GC. A number of resin acids, saturated and unsaturated fatty acids, chloro fatty and resin acid have been detected and their concentrations are estimated. The results are compared with results on different agriculture residue/hardwood pulps, which were reported earlier. The concentrations of various compounds detected have also been compared with their reported LC50 values.展开更多
The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption tim...The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption time, etc on adsorbing Lu 3+ . The best value of medium’s pH to the adsorption of PAR for Lu 3+ was found to be 4.92. The static adsorption maximum capacity of PAR for Lu 3+ is 220?mg·g -1 . The thermodynamic adsorption parameters are respectively ΔH=11.3?kJ·mol -1 , ΔS=46.3?J·mol -1 ·K -1 , ΔG=-2.50?kJ·mol -1 and the apparent activity energy is E_a=31.4?kJ·mol -1 . The adsorption behavior of PAR for Lu 3+ obeys the Freundlich isotherm. The apparent adsorption rate constant is k_ 298 =4.68 ×10 -5 ?s -1 . The coordinate ratio of the functional radical to Lu 3+ is approximately 4∶1. The best eluant is 1.0?mol·L -1 HCl. The adsorption mechanism of PAR for Lu 3+ was separately confirmed by chemical analysis and IR spectra.展开更多
A macroporous polymeric adsorbent NG-8 was synthesized with divinylbenzene using conventional suspension polymerization technique. Its aminated product NG-9 was prepared by introducing tertiary amino groups into NG-8 ...A macroporous polymeric adsorbent NG-8 was synthesized with divinylbenzene using conventional suspension polymerization technique. Its aminated product NG-9 was prepared by introducing tertiary amino groups into NG-8 for removal of tannin acid from aqueous solutions. NG-9 could be used directly without a wetting process and had higher adsorption capacity than NG-8, which might be attributed to the enhanced adsorbent-adsorbate interaction due to the tertiary amino groups on the polymeric matrix. The Langmuir equation was successfully employed to describe the adsorption process. The adsorption enthalpy change further validated the uptake of tannin acid on NG-9 to be an enhanced physical adsorption because of the Lewis acid-base interaction. In addition, adsorption kinetic studies testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate maybe for the hindrance of the tertiary amino groups and water clusters built up.展开更多
基金Project(20133326110006)supported by Ph D Programs Foundation of Ministry of Education of ChinaProject(2014R408073)supported by College Student Innovation Projects of Zhejiang Province+2 种基金ChinaProject supported by Zhejiang Provincial Key Laboratory of Industrial Textile Materials&Manufacturing TechChina
文摘The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, which proved that 110-H owned satisfactory adsorption capacity（346.85 mg/g） in optimum conditions, belonging to one of the high adsorption capacity materials. Then, the adsorption and desorption behaviors were investigated by batch studies. The adsorption performance showed high agreement with the Lagergren-first-order model and Langmuir isotherm with thermodynamic adsorption parameters of ΔH= 36.1 k J/mol and ΔS=200 J/（mol·K）. Desorption study revealed that 110-H could be effectively eluted by a low concentration of HCl solution（0.1 mol/L） to regenerate and reuse. Finally, the 110-H and Eu（III） loaded 110-H were characterized by IR spectroscopy and scanning electron microscope（SEM） to analyze the mechanism of adsorption, which proved to be chemisorbed.
文摘The adsorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR) for Er(Ⅲ) were investigated. The optima adsorption condition of DAAR for Er(Ⅲ) is pH 6.20 in HAc NaAc medium. The statically saturated adsorption capacity is 189 mg·g -1 resin at 298 K. The Er (Ⅲ) adsorbed on DAAR can be eluted reaching 100% by 2 mol·L -1 HCl used as eluant. The resin can be regenerated and reused without apparent decreasing of adsorption capacity. The apparent adsorption rate constant is k 298 =1.94×10 -5 s -1 . The apparent activation energy is 24.7 kJ·mol -1 . The adsorption behavior of DAAR for Er(Ⅲ) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change Δ H of DAAR for Er(Ⅲ) is 24.1 kJ·mol -1 . The molar coordination ratio of the functional group of DAAR to Er (Ⅲ) is 3∶1. The adsorption mechanism of DAAR for Er (Ⅲ) was examined by using chemical method and IR spectrometry. The coordination compound is formed between oxygen atoms in the functional group of DAAR and Er(Ⅲ).
基金Supported by Zhejiang Provincial Natural Science Foundation of China( No.2 0 0 0 72 )
文摘The adsorption behavior and the mechanism of a novel chelate resin, amino methylene phosphonic acid resin(APAR) for Cu(Ⅱ) were investigated. Cu(Ⅱ) was quantitatively adsorbed by APAR in the medium of pH=4 09. The statically saturated adsorption capacity is 181 mg/(g resin). Cu(Ⅱ) adsorbed on APAR can be eluted by 1 0-3 0 mol/L HCl. The rate constant is k 298 =5 58×10 -5 s -1 . The adsorption of Cu(Ⅱ) on APAR follows the Freundlich isotherm. The Δ H of the adsorption is 3 91 kJ/mol. The apparent activation energy is E a=21 4 kJ/mol. The coordination molar ratio of APAR to Cu(Ⅱ) is 1/1. It is shown that the nitrogen and the oxygen atoms in the functional group of APAR coordinate to Cu(Ⅱ).
基金supported by the Natural Science Foundation of Zhejiang Province(No.Y407240).
文摘Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper catalyst is air stable and can be readily recovered and reused with minimal loss of activity for three runs.
基金This project was supported by Foundation of Zhejiang Provincial Education Bureau(No.20010677) and Lishui Science and Technology Bureau(No.2001012)
文摘The sorption behavior of amino methylene phosphonic acid resin (APAR) for In (Ⅲ ) was investigated . Experimental results show that In ( Ⅲ ) adsorbed on APAR can be elated with 2mol · L -1 HCl. The apparent rate constant is k29 = 1.50 × 10-5s-1. The sorption behavior of APAR for In ( Ⅲ ) obeys the Freundlich isotherm. The themodynamic parameters of sorption, enthalpy change ()H, free energy change ()G and entropy change ()S of sorption (APAR) for In ( Ⅲ ) are 24.1 kJ·mol-1, -35. 1kJ· mol-1 and 200J· mol-1·K-1 respectively. The coordination molar ratio of the functional group of APAR to In( Ⅲ ) is 2:1. The sorption mechanism of APAR for In( Ⅲ ) was examined by IR spectrometry.
文摘A convenient and effective Paal-Knorr condensations of 2,5-hexanedione with most amines have been carried out at room temperature under solvent-free condition.Macroporous strongly acidic styrol resin(D001) as a novel,efficient,cost-effective,and reusable solid acid catalyst for the synthesis of pyrroles under the same conditions.The pyrroles were obtained in high yields in short reaction times.
文摘In（Ⅲ） was quantitatively adsorbed by iminodiacetic acid resin （IDAAR） in the medium of pH = 4.52. The statically saturated sorption capacity of IDAAR is 235.5 mg·g^-1. 1.0 mol·L^-1 HCl can be used as an eluant. The elution efficiency is 97.9%. The resin can be regenerated and reused without apparent decrease of sorption capacity. The sorption rate constant is k298 = 1.94 × 10-5 s^-1. The apparent sorption activation energy of IDAAR for In（Ⅲ） is 20.1 kJ·mol^-1. The sorption behavior of IDAAR for In（HI） obeys the Freundlich isotherm. The enthalpy change is AH= 17.2 kJ·mol^-1.
文摘Tje adsorption bchavior and mechanism of a novel chelate resin,macroporous phosphonic acid resin（PAR）for Ni（Ⅱ）were imestigated.The stotically saturated adsorption capacity is 64.3mg·g^-1 resin at 298K in HAc-NaAc medium.The Ni（Ⅱ）adsorbed on PAR can be eluted by 0.5mal·L^-1 HCl and the elution percentage reaches 96.6%.The resin can be regenerated and reused without abvious decrease in adsorption capacity.The apparent adsorption rate constant is k298=2.6×10^-5s^-1.The adsorption behavior of PAR for Ni（Ⅱ）obeys the Freundllich isotherm.The thermodynamie adsorption parameters.enthalpy change △H,free energy change △G and entropy change △S of PAR for Ni（Ⅱ）are 3.36kJ·mol^-1,-5.47kJ·mol^-1 and 29.6J·mol^-1·K^-1,respectively.The apparent activation energy is Ea=12.2kJ·mol^-1,The molar coordination ratio of the functional group of PAR to Ni（Ⅱ）is about 4：1.The adsorption mechanism of PAR for Ni（Ⅱ）was examined by a chemical method and IR spectrometry.
文摘The influences of medium pH sorption temperature, sorption time, etc. on thesorption capacity of macroporous Phosphonic acid resin for La3+ were determined Thesorption rate constant was k298 = 7.64×10-5 s-1. The complex ratio of phosphonicgroups of the resin to La3+ was 3:1. The basic sorption parameters were determinedThe sorption mechanism of macroporous phosphonic acid resin for La3+ was examinedby chemical analysis and IR- spectrometry.
基金Project(2008F70059) supported by the Scientific and Technological Research Planning of Zhejiang Province, China
文摘The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.
基金Project(20040501) supported by the Department of Education of Zhejiang Province, China
文摘The sorption properties of amino methylene phosphonic resin(APAR) for Ag(Ⅰ) were studied. The amino methylene phosphonic acid resin(APAR) has a good adsorption ability for Ag(Ⅰ) at pH=6.0 in the HAc-NaAc medium. The statically saturated adsorption capacity is 272 mg/g resin, Ag(Ⅰ) adsorbed on APAR can be eluted by 5% (NH2)2CS-0.5 mol/L hydrochloric acid quantitatively. The adsorption rate constants determined under various temperatures are k15℃=3.89×10?5 s?1, k25℃=5.93×10?5 s?1, k35℃=7.59×10?5 s?1, k45℃=9.45×10?5 s?1, respectively. The apparent activation energy of adsorption, Ea is 22.8 kJ/mol, the enthalpy change (?H) of sorption is 17.4 kJ/mol. The adsorption mechanism shows that the functional group of APAR coordinates with Ag(Ⅰ) to form coordination bond, the coordination molar ratio of the functional group of APAR to Ag(Ⅰ) is 1∶1.
文摘The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg·g^(-1)resin and 296 mg·g^(-1)resin at 298 K in HAc-NaAc medium at pH 5.6. Gd(Ⅲ)adsorbed on PAR can be reductively eluted by 0.5～5.0 mol·L^(-1) HCl used as eluant and the elution percentage is up to 94.7% in 1.0 mol·L^(-1) HCl. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=3.96×10^(-5) s^(-1). The adsorption behavior of PAR for Gd(Ⅲ) conforms to the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change △H of PAR for Gd(Ⅲ)is 22.6kJ·mol^(-1). The apparent adsorption activation energy(Ea)of PAR for Gd(Ⅲ)is 5.0 kJ·mol^(-1). The molar coordination ratio of the functional group of PAR to Gd(Ⅲ)is about 3∶1. The adsorption mechanism of PAR for Gd(Ⅲ)was examined by using chemical method and IR spectrometry.
文摘The adsorption behavior and mechanism of a novel chelate resin, amino methylene phosphonic acid resin (APAR) for Ho(Ⅲ) were investigated. The statically saturated adsorption capacity is 258 mg·g^(-1) resin at 298 K in HAc-NaAc medium. The Ho(Ⅲ) adsorbed on APAR can be repeatedly eluted by 3.0 mol·L^(-1) HCl and the elution percentage is as high as 95.8%. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=1.14×10^(-5) s^(-1). The adsorption behavior of APAR for Ho(Ⅲ) obeys the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change ΔH of APAR for Ho(Ⅲ) is 11.4 kJ·mol^(-1). The apparent activation energy is E_a=15.8 kJ·mol^(-1). The molar coordination ratio of the functional group of APAR to Ho(Ⅲ) is about 2∶1. The adsorption mechanism of APAR for Ho(Ⅲ) was examined by using chemical method and IR spectrometry.
基金The Natural Science Foundation of Zhejiang Province (No.200072)
文摘The sorption behavior and mechanism of a novel chelate resin, diglycolamidic acid resin (DAAR), for Sm(III) were investigated. The optimal sorption condition of DAAR for Sm(III) is pH=6.0 in HAc-NaAc medium. The statically saturated sorption capacity is 190mg/g resin at 298K. The Sm(III) adsorbed on DAAR can be eluted reaching 100% by 0.5~2.0mol/L HCl used as eluant. The resin can be regenerated and reused without apparent decrease of sorption capacity. The apparent sorption rate constant is k298= 1.96×10-5s-1. The apparent activation energy is 26kJ/mol. The sorption behavior of DAAR for Sm(III) obeys the Freundlich isotherm. The thermodynamic sorption parameters, enthalpy change 腍 of DAAR for Sm(III) is 16.9kJ/mol. The molar coordination ratio of the functional group of DAAR to Sm (III) is 3. The sorption mechanism of DAAR for Sm(III) was examined by using chemical method and IR spectrometry. The coordination bond was formed between oxygen atoms in the functional group of DAAR and Sm(III).
基金Foundations of Zhejiang Provincial Education Ministry (No.20010677)
文摘Sm(III) was quantitatively adsorbed by amino methylene phosphonic acid resin (APAR) in the medium of pH=5.0. The statically saturated sorption capacity is 251mg/g·resin. Sm(III) adsorbed on APAR can be reductively eluted by 2.0mol/L HCl. The sorption rate constant is k298= 1.35×10-5s-1. The sorption behavior of APAR for Sm(III) obeys the Freundlich isotherm. The enthalpy change △H of sorption is 24.9kJ/mol. The apparent activation energy is Ea=11.7kJ/mol. The sorption mechanism shows that the nitrogen and oxygen atoms of the functional group of APAR coordinated with Sm(III) to form coordination bond.
基金Zhoushan Science & Technology Bureau (No. 04114)
文摘The adsorption kinetics and mechanism of a novel chelate resin, macroporous phosphonic acid resin (PAR) for In(III) were investigated. The statically saturated adsorption capacity is 216mg穏-1resin at 298K in HAc-NaAc medium. The apparent adsorption rate constant is k298=4.84?0-5 s-1. The adsorption behavior of PAR for In(III) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change △H, free energy change △G and entropy change △S of PAR for In(III) are 11.5kJ/mol, -12.6kJ/mol and 80.8J/mol稫, respectively. The apparent activation energy is Ea=3.5kJ/mol. The molar coordination ratio of the functional group of PAR to In(III) is about 3∶1.
基金supported by the National Natural Science Fundation of China(No.50778088)China National Funds for Distinguished Young Scientists(No.50825802)
文摘Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7 and D-201 are performed, and all data indicates resin XAD-7 can be used as an effective adsorbent for removing tannic acid during water/wastewater treatment. Furthermore, adsorption thermodynamics studies indicate different adsorption mechanisms for TA on XAD-7 and D-201. FT-IR and solid state 13C-NMR spectroscopy are used to explain the adsorption force between XAD-7 and TA. It suggests that hydrogen bonding is the main adsorption force for TA. Finally, XAD-7＇s adsorption capacity in the presence of different metal ions is investigated, which indicates that heavy metal ions in solutions can decrease the adsorption capacity for TA on ester resin XAD-7.
文摘Laboratory generated spent bleached liquor from the chlorination, caustic extraction stage of mixed wood kraft pulp processing has been analyzed both qualitatively and quantitatively for various resin & fatty acids by using GC. A number of resin acids, saturated and unsaturated fatty acids, chloro fatty and resin acid have been detected and their concentrations are estimated. The results are compared with results on different agriculture residue/hardwood pulps, which were reported earlier. The concentrations of various compounds detected have also been compared with their reported LC50 values.
文摘The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu 3+ and the influence of the medium’s pH, adsorption temperature, adsorption time, etc on adsorbing Lu 3+ . The best value of medium’s pH to the adsorption of PAR for Lu 3+ was found to be 4.92. The static adsorption maximum capacity of PAR for Lu 3+ is 220?mg·g -1 . The thermodynamic adsorption parameters are respectively ΔH=11.3?kJ·mol -1 , ΔS=46.3?J·mol -1 ·K -1 , ΔG=-2.50?kJ·mol -1 and the apparent activity energy is E_a=31.4?kJ·mol -1 . The adsorption behavior of PAR for Lu 3+ obeys the Freundlich isotherm. The apparent adsorption rate constant is k_ 298 =4.68 ×10 -5 ?s -1 . The coordinate ratio of the functional radical to Lu 3+ is approximately 4∶1. The best eluant is 1.0?mol·L -1 HCl. The adsorption mechanism of PAR for Lu 3+ was separately confirmed by chemical analysis and IR spectra.
基金This work was supported by the Jiangsu Provincial Key Laboratory of Coastal Wetland Bioresources and Environmental Protection,China(Grant Code JLCBE6006).
文摘A macroporous polymeric adsorbent NG-8 was synthesized with divinylbenzene using conventional suspension polymerization technique. Its aminated product NG-9 was prepared by introducing tertiary amino groups into NG-8 for removal of tannin acid from aqueous solutions. NG-9 could be used directly without a wetting process and had higher adsorption capacity than NG-8, which might be attributed to the enhanced adsorbent-adsorbate interaction due to the tertiary amino groups on the polymeric matrix. The Langmuir equation was successfully employed to describe the adsorption process. The adsorption enthalpy change further validated the uptake of tannin acid on NG-9 to be an enhanced physical adsorption because of the Lewis acid-base interaction. In addition, adsorption kinetic studies testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate maybe for the hindrance of the tertiary amino groups and water clusters built up.
