This research aims to address the pressing issue of failed and abandoned wells, causing water scarcity in Lapan Gwari Community, through an improved groundwater exploration approach integrating remote sensing and elec...This research aims to address the pressing issue of failed and abandoned wells, causing water scarcity in Lapan Gwari Community, through an improved groundwater exploration approach integrating remote sensing and electrical resistivity soundings. The study area, located within the Zungeru Sheet 163 SE, spans Latitudes 9°30'00"N to 9°32'00"N and Longitudes 6°28'00" to 6°30'00". The surface geologic, structural, and hydrogeological mapping provided essential insights into the hydrogeological framework. Leveraging SRTM DEM data, thematic maps were created for geomorphology, slope, land use, lineament density, and drainage density. These datasets were then integrated using ArcGIS to develop a preliminary groundwater potential zones map. Further investigations were conducted using Vertical Electrical Sounding (VES) and Electrical Resistivity Imaging (2D VES) surveys at targeted locations identified by the preliminary map. Results show that the study area predominantly consists of crystalline rocks of the Nigerian Basement Complex, primarily comprising schist and granite with minor occurrences of quartz vein intrusions. Surface joint directions indicated a dominant NE-SW trend. The VES data revealed three to four geoelectric layers, encompassing the topsoil (1 to 5 m depth, resistivity: 100 Ωm to 300 Ωm), the weathered layer (in the 3-layer system) or fractured layer (in the 4-layer system), and the fresh basement rock characterized by infinite resistivity. The shallow weathered layers (3 to 30 m thickness) are believed to hold aquiferous potential. Hydrogeological interpretation, facilitated by 2D resistivity models, delineated water horizons trapped within clayey sand and weathered/fractured formations. Notably, the aquifer resistivity range was found to be between 3 - 35 m and 100 - 300 Ωm, signifying a promising aquifer positioned at depths of 40 to 88 m. This aligns with corroborative static water level measurements. Given this, we recommend drilling depths of a minimum of 80 m to ensure the acquisition of sufficient and sustainable water supplies. The final groundwater potential zones map derived from this study is expected to serve as an invaluable guide for prospective groundwater developers and relevant authorities in formulating effective water resource management plans. By effectively tackling water scarcity challenges in Lapan Gwari Community, this integrated approach demonstrates its potential for application in similar regions facing comparable hydrogeological concerns.展开更多
Conventional artificial neural networks used to solve electrical resistivity imaging （ERI） inversion problem suffer from overfitting and local minima. To solve these problems, we propose to use a pruning Bayesian ne...Conventional artificial neural networks used to solve electrical resistivity imaging （ERI） inversion problem suffer from overfitting and local minima. To solve these problems, we propose to use a pruning Bayesian neural network （PBNN） nonlinear inversion method and a sample design method based on the K-medoids clustering algorithm. In the sample design method, the training samples of the neural network are designed according to the prior information provided by the K-medoids clustering results; thus, the training process of the neural network is well guided. The proposed PBNN, based on Bayesian regularization, is used to select the hidden layer structure by assessing the effect of each hidden neuron to the inversion results. Then, the hyperparameter αk, which is based on the generalized mean, is chosen to guide the pruning process according to the prior distribution of the training samples under the small-sample condition. The proposed algorithm is more efficient than other common adaptive regularization methods in geophysics. The inversion of synthetic data and field data suggests that the proposed method suppresses the noise in the neural network training stage and enhances the generalization. The inversion results with the proposed method are better than those of the BPNN, RBFNN, and RRBFNN inversion methods as well as the conventional least squares inversion.展开更多
To improve the global search ability and imaging quality of electrical resistivity imaging(ERI) inversion, a two-stage learning ICPSO algorithm of radial basis function neural network(RBFNN) based on information crite...To improve the global search ability and imaging quality of electrical resistivity imaging(ERI) inversion, a two-stage learning ICPSO algorithm of radial basis function neural network(RBFNN) based on information criterion(IC) and particle swarm optimization(PSO) is presented. In the proposed method, IC is applied to obtain the hidden layer structure by calculating the optimal IC value automatically and PSO algorithm is used to optimize the centers and widths of the radial basis functions in the hidden layer. Meanwhile, impacts of different information criteria to the inversion results are compared, and an implementation of the proposed ICPSO algorithm is given. The optimized neural network has one hidden layer with 261 nodes selected by AKAIKE's information criterion(AIC) and it is trained on 32 data sets and tested on another 8 synthetic data sets. Two complex synthetic examples are used to verify the feasibility and effectiveness of the proposed method with two learning stages. The results show that the proposed method has better performance and higher imaging quality than three-layer and four-layer back propagation neural networks(BPNNs) and traditional least square(LS) inversion.展开更多
Electrical resistivity imaging surveys have been conducted in order to locate, delineate subsurface water resource and estimate its reserve. The resistivity imaging surveys carried out basically measure and map the re...Electrical resistivity imaging surveys have been conducted in order to locate, delineate subsurface water resource and estimate its reserve. The resistivity imaging surveys carried out basically measure and map the resistivity of subsurface materials. Electrical imaging is an appropriate survey technique for areas with complex geology where the use of resistivity sounding and other techniques are unsuitable to provide detailed subsurface information. The purpose of electrical surveys is to determine the subsurface resistivity distribution by making measurements on the ground surface. The resistivity imaging measurement employing Wenner electrode configuration was carried out using an ABEM SAS 1000 terrameter and electrode selector system ES464. The field survey was conducted along four profiles which provide a continuous coverage of the resistivity imaging below surface. The surface soil material is mainly clayey silt. The results showed that the layers associated with the low resistivities （Ωm） are located at depth ranging from 2 m to 28 m. This low resistivity values are associated with zone of water saturated weathered layer and fractures. The results showed that the thickness of residual soil is about 0.5-2.55 m. Borehole data indicated that the depth of bedrock is about 10 m and the groundwater level is ranging from 8.73 m to 8.54 m.展开更多
Multi-electrodes Resistivity Imaging Survey(MRIS)is an array method of electrical survey.In practice how to choose a reasonable array is the key to get reliable survey results.Based on four methods of MRIS such as Wen...Multi-electrodes Resistivity Imaging Survey(MRIS)is an array method of electrical survey.In practice how to choose a reasonable array is the key to get reliable survey results.Based on four methods of MRIS such as Wenner,Schlumberger,Pole-pole and Dipole-dipole the authors established the model,by studying the result of the forward numerical simulation modeling and inverse modeling,and analyzed the differences among the different forms of detection devices.展开更多
In this paper, an electrical resistance tomography(ERT) imaging method is used as a classifier, and then the Dempster-Shafer's evidence theory with fuzzy clustering is integrated to improve the ERT image quality. ...In this paper, an electrical resistance tomography(ERT) imaging method is used as a classifier, and then the Dempster-Shafer's evidence theory with fuzzy clustering is integrated to improve the ERT image quality. The fuzzy clustering is applied to determining the key mass function, and dealing with the uncertain, incomplete and inconsistent measured imaging data in ERT. The proposed method was applied to images with the same investigated object under eight typical current drive patterns. Experiments were performed on a group of simulations using COMSOL Multiphysics tool and measurements with a piece of porcine lung and a pair of porcine kidneys as test materials. Compared with any single drive pattern, the proposed method can provide images with a spatial resolution of about 10% higher, while the time resolution was almost the same.展开更多
This paper reports some results of geoscientific investigations of the shallow subsurface beneath the Nazca geoglyphs in the stone desert in southern Peru. A resistivity and georadar survey was accompanied by soil sam...This paper reports some results of geoscientific investigations of the shallow subsurface beneath the Nazca geoglyphs in the stone desert in southern Peru. A resistivity and georadar survey was accompanied by soil sampling at a test site in the Palpa district. The resulting images of the two geophysical methods indicate similar structures. Georadar enables a fast and continuous data acquisition but is restricted in its depth of penetration. Despite the dry surface conditions, the electrical method yielded good results in the desert area. The resulting resistivity images for both vertical and horizontal slices provide structural information that might be interpreted in terms of lithology and water content. A promising correlation between sulfate content and electrical resistivity at shallow depth was observed that might be helpful to provide insight into the migration of chemical constituents. The approach to combine geophysical, mineralogical and geochemical methods proves to be successful to extend the knowledge on the weathering processes in the desert soil.展开更多
Earthen sites are widely distributed throughout China, and most of them belong to archaeological sites with significant values, which not only directly witness the origin, formation and development of Chinese civiliza...Earthen sites are widely distributed throughout China, and most of them belong to archaeological sites with significant values, which not only directly witness the origin, formation and development of Chinese civilization, but also possess important values for conservation and exhibition. Many researches and practices on their conservation and consolidation have been carried out; however, the consolidation effect is mainly judged by visual observation and expert evaluation. Scientific assessment of conservation and consolidation effects is a challenging issue. Many instruments in other fields cannot be directly applied to the conservation of cultural relics due to their peculiarity. In order to assess the effects of field conservation experiments, this paper tries to understand the consolidation effects at Liangzhu site using nondestructive or micro-damage methods, including thermo-physical parameters testing, infrared thermal imaging, high-density microelectrode resistivity testing, portable microscope observation, and hydrophilic and hydrophobic testing, and thereby explores the practicable methods for evaluating the properties of consolidation materials for earthen sites treatment.展开更多
Objectives To investigate the relationship between serum uric acid levels and arteriole resistance detected with the color Doppler energy imaging (CDEI) and to explore the risks of impaired regulation of vascular tone...Objectives To investigate the relationship between serum uric acid levels and arteriole resistance detected with the color Doppler energy imaging (CDEI) and to explore the risks of impaired regulation of vascular tone by uric acid in kidneys of hypertension patients. Methods In 12 healthy control cases, 28 non-diabetic hypertension (nNIDDM +H) cases and 25 type 2 diabetic hypertension (NIDDM+H) cases, uric acid (UA) levels were measured with uricase-peroxidase method. Arteriole resistance index (RI) and pulsate index (PI) in separate sections of renal artery included MAR, SRA, IRA were detected using CDEI with 2.1~4.2 Hz Doppler transducer in kidneys. Results In comparison, UA was significantly higher in non-diabetic hyper- tension group and diabetic hypertension group than in control group (P<0.01, separately). UA levels was also significantly higher in NIDDM+H group than in nNIDDM+H, P < 0.029. RI in separate sections of renal artery was significantly higher in nNIDDM+H, or NIDDM+H group than in control group ( all P < 0.01) , and it was significantly higher in NIDDM +H than nNIDDM+H groups (P < 0.05 and P < 0.01). In nNIDDM +H and NIDDM +H groups UA levels and IRA-RI could be elevated significantly following with the impaired heart function being aggravated (χ2 = 13.028, P=0.005, χ2=13.29, P=0.004); the dosage of HCT being increased (χ2 =14.216, P=0.001, χ2 = 14.661, P=0.001); the levels of GHbA1 being excessed unnormally (P=0.000). The correlation between UA and IRA-RI in both hypertension groups were directly related, in nNIDDM+H group r=0.842, P=0.000, in NIDDM+H group, r=0.797, P=0.000. Conclusions Uric acid levels and IRA-RI in hyper-tension patients were directly related. Uric acid levels and IRA-RI could be partly dependent on the severity of heart dysfunction, diuretic dose, and serum glucose status of diabete patients in long-term. Uric acid and the xanthine oxidase metabolic pathway may contribute to impaired regulation of arteriole tone in hypertension patients.展开更多
文摘This research aims to address the pressing issue of failed and abandoned wells, causing water scarcity in Lapan Gwari Community, through an improved groundwater exploration approach integrating remote sensing and electrical resistivity soundings. The study area, located within the Zungeru Sheet 163 SE, spans Latitudes 9°30'00"N to 9°32'00"N and Longitudes 6°28'00" to 6°30'00". The surface geologic, structural, and hydrogeological mapping provided essential insights into the hydrogeological framework. Leveraging SRTM DEM data, thematic maps were created for geomorphology, slope, land use, lineament density, and drainage density. These datasets were then integrated using ArcGIS to develop a preliminary groundwater potential zones map. Further investigations were conducted using Vertical Electrical Sounding (VES) and Electrical Resistivity Imaging (2D VES) surveys at targeted locations identified by the preliminary map. Results show that the study area predominantly consists of crystalline rocks of the Nigerian Basement Complex, primarily comprising schist and granite with minor occurrences of quartz vein intrusions. Surface joint directions indicated a dominant NE-SW trend. The VES data revealed three to four geoelectric layers, encompassing the topsoil (1 to 5 m depth, resistivity: 100 Ωm to 300 Ωm), the weathered layer (in the 3-layer system) or fractured layer (in the 4-layer system), and the fresh basement rock characterized by infinite resistivity. The shallow weathered layers (3 to 30 m thickness) are believed to hold aquiferous potential. Hydrogeological interpretation, facilitated by 2D resistivity models, delineated water horizons trapped within clayey sand and weathered/fractured formations. Notably, the aquifer resistivity range was found to be between 3 - 35 m and 100 - 300 Ωm, signifying a promising aquifer positioned at depths of 40 to 88 m. This aligns with corroborative static water level measurements. Given this, we recommend drilling depths of a minimum of 80 m to ensure the acquisition of sufficient and sustainable water supplies. The final groundwater potential zones map derived from this study is expected to serve as an invaluable guide for prospective groundwater developers and relevant authorities in formulating effective water resource management plans. By effectively tackling water scarcity challenges in Lapan Gwari Community, this integrated approach demonstrates its potential for application in similar regions facing comparable hydrogeological concerns.
基金supported by the National Natural Science Foundation of China(Grant No.41374118)the Research Fund for the Higher Education Doctoral Program of China(Grant No.20120162110015)+3 种基金the China Postdoctoral Science Foundation(Grant No.2015M580700)the Hunan Provincial Natural Science Foundation,the China(Grant No.2016JJ3086)the Hunan Provincial Science and Technology Program,China(Grant No.2015JC3067)the Scientific Research Fund of Hunan Provincial Education Department,China(Grant No.15B138)
文摘Conventional artificial neural networks used to solve electrical resistivity imaging （ERI） inversion problem suffer from overfitting and local minima. To solve these problems, we propose to use a pruning Bayesian neural network （PBNN） nonlinear inversion method and a sample design method based on the K-medoids clustering algorithm. In the sample design method, the training samples of the neural network are designed according to the prior information provided by the K-medoids clustering results; thus, the training process of the neural network is well guided. The proposed PBNN, based on Bayesian regularization, is used to select the hidden layer structure by assessing the effect of each hidden neuron to the inversion results. Then, the hyperparameter αk, which is based on the generalized mean, is chosen to guide the pruning process according to the prior distribution of the training samples under the small-sample condition. The proposed algorithm is more efficient than other common adaptive regularization methods in geophysics. The inversion of synthetic data and field data suggests that the proposed method suppresses the noise in the neural network training stage and enhances the generalization. The inversion results with the proposed method are better than those of the BPNN, RBFNN, and RRBFNN inversion methods as well as the conventional least squares inversion.
基金Project(41374118)supported by the National Natural Science Foundation,ChinaProject(20120162110015)supported by Research Fund for the Doctoral Program of Higher Education,China+3 种基金Project(2015M580700)supported by the China Postdoctoral Science Foundation,ChinaProject(2016JJ3086)supported by the Hunan Provincial Natural Science Foundation,ChinaProject(2015JC3067)supported by the Hunan Provincial Science and Technology Program,ChinaProject(15B138)supported by the Scientific Research Fund of Hunan Provincial Education Department,China
文摘To improve the global search ability and imaging quality of electrical resistivity imaging(ERI) inversion, a two-stage learning ICPSO algorithm of radial basis function neural network(RBFNN) based on information criterion(IC) and particle swarm optimization(PSO) is presented. In the proposed method, IC is applied to obtain the hidden layer structure by calculating the optimal IC value automatically and PSO algorithm is used to optimize the centers and widths of the radial basis functions in the hidden layer. Meanwhile, impacts of different information criteria to the inversion results are compared, and an implementation of the proposed ICPSO algorithm is given. The optimized neural network has one hidden layer with 261 nodes selected by AKAIKE's information criterion(AIC) and it is trained on 32 data sets and tested on another 8 synthetic data sets. Two complex synthetic examples are used to verify the feasibility and effectiveness of the proposed method with two learning stages. The results show that the proposed method has better performance and higher imaging quality than three-layer and four-layer back propagation neural networks(BPNNs) and traditional least square(LS) inversion.
文摘Electrical resistivity imaging surveys have been conducted in order to locate, delineate subsurface water resource and estimate its reserve. The resistivity imaging surveys carried out basically measure and map the resistivity of subsurface materials. Electrical imaging is an appropriate survey technique for areas with complex geology where the use of resistivity sounding and other techniques are unsuitable to provide detailed subsurface information. The purpose of electrical surveys is to determine the subsurface resistivity distribution by making measurements on the ground surface. The resistivity imaging measurement employing Wenner electrode configuration was carried out using an ABEM SAS 1000 terrameter and electrode selector system ES464. The field survey was conducted along four profiles which provide a continuous coverage of the resistivity imaging below surface. The surface soil material is mainly clayey silt. The results showed that the layers associated with the low resistivities （Ωm） are located at depth ranging from 2 m to 28 m. This low resistivity values are associated with zone of water saturated weathered layer and fractures. The results showed that the thickness of residual soil is about 0.5-2.55 m. Borehole data indicated that the depth of bedrock is about 10 m and the groundwater level is ranging from 8.73 m to 8.54 m.
基金Supported by Project of the National High Technology Research and Development Program of China(No.2007AA06Z215)
文摘Multi-electrodes Resistivity Imaging Survey(MRIS)is an array method of electrical survey.In practice how to choose a reasonable array is the key to get reliable survey results.Based on four methods of MRIS such as Wenner,Schlumberger,Pole-pole and Dipole-dipole the authors established the model,by studying the result of the forward numerical simulation modeling and inverse modeling,and analyzed the differences among the different forms of detection devices.
基金Supported by National Natural Science Foundation of China(No.61774014 and No.60772080)
文摘In this paper, an electrical resistance tomography(ERT) imaging method is used as a classifier, and then the Dempster-Shafer's evidence theory with fuzzy clustering is integrated to improve the ERT image quality. The fuzzy clustering is applied to determining the key mass function, and dealing with the uncertain, incomplete and inconsistent measured imaging data in ERT. The proposed method was applied to images with the same investigated object under eight typical current drive patterns. Experiments were performed on a group of simulations using COMSOL Multiphysics tool and measurements with a piece of porcine lung and a pair of porcine kidneys as test materials. Compared with any single drive pattern, the proposed method can provide images with a spatial resolution of about 10% higher, while the time resolution was almost the same.
文摘This paper reports some results of geoscientific investigations of the shallow subsurface beneath the Nazca geoglyphs in the stone desert in southern Peru. A resistivity and georadar survey was accompanied by soil sampling at a test site in the Palpa district. The resulting images of the two geophysical methods indicate similar structures. Georadar enables a fast and continuous data acquisition but is restricted in its depth of penetration. Despite the dry surface conditions, the electrical method yielded good results in the desert area. The resulting resistivity images for both vertical and horizontal slices provide structural information that might be interpreted in terms of lithology and water content. A promising correlation between sulfate content and electrical resistivity at shallow depth was observed that might be helpful to provide insight into the migration of chemical constituents. The approach to combine geophysical, mineralogical and geochemical methods proves to be successful to extend the knowledge on the weathering processes in the desert soil.
基金supported by the National"12th Five-Year"Plan for Science and Technology Support(Grant No.2014BAK16B02)the Key Project of the State Administration of Cultural Heritage(Grant No.20120207)the Project on Basic Research of Gansu Province's Innovation Group(Grant No.145RJIF336)
文摘Earthen sites are widely distributed throughout China, and most of them belong to archaeological sites with significant values, which not only directly witness the origin, formation and development of Chinese civilization, but also possess important values for conservation and exhibition. Many researches and practices on their conservation and consolidation have been carried out; however, the consolidation effect is mainly judged by visual observation and expert evaluation. Scientific assessment of conservation and consolidation effects is a challenging issue. Many instruments in other fields cannot be directly applied to the conservation of cultural relics due to their peculiarity. In order to assess the effects of field conservation experiments, this paper tries to understand the consolidation effects at Liangzhu site using nondestructive or micro-damage methods, including thermo-physical parameters testing, infrared thermal imaging, high-density microelectrode resistivity testing, portable microscope observation, and hydrophilic and hydrophobic testing, and thereby explores the practicable methods for evaluating the properties of consolidation materials for earthen sites treatment.
文摘Objectives To investigate the relationship between serum uric acid levels and arteriole resistance detected with the color Doppler energy imaging (CDEI) and to explore the risks of impaired regulation of vascular tone by uric acid in kidneys of hypertension patients. Methods In 12 healthy control cases, 28 non-diabetic hypertension (nNIDDM +H) cases and 25 type 2 diabetic hypertension (NIDDM+H) cases, uric acid (UA) levels were measured with uricase-peroxidase method. Arteriole resistance index (RI) and pulsate index (PI) in separate sections of renal artery included MAR, SRA, IRA were detected using CDEI with 2.1~4.2 Hz Doppler transducer in kidneys. Results In comparison, UA was significantly higher in non-diabetic hyper- tension group and diabetic hypertension group than in control group (P<0.01, separately). UA levels was also significantly higher in NIDDM+H group than in nNIDDM+H, P < 0.029. RI in separate sections of renal artery was significantly higher in nNIDDM+H, or NIDDM+H group than in control group ( all P < 0.01) , and it was significantly higher in NIDDM +H than nNIDDM+H groups (P < 0.05 and P < 0.01). In nNIDDM +H and NIDDM +H groups UA levels and IRA-RI could be elevated significantly following with the impaired heart function being aggravated (χ2 = 13.028, P=0.005, χ2=13.29, P=0.004); the dosage of HCT being increased (χ2 =14.216, P=0.001, χ2 = 14.661, P=0.001); the levels of GHbA1 being excessed unnormally (P=0.000). The correlation between UA and IRA-RI in both hypertension groups were directly related, in nNIDDM+H group r=0.842, P=0.000, in NIDDM+H group, r=0.797, P=0.000. Conclusions Uric acid levels and IRA-RI in hyper-tension patients were directly related. Uric acid levels and IRA-RI could be partly dependent on the severity of heart dysfunction, diuretic dose, and serum glucose status of diabete patients in long-term. Uric acid and the xanthine oxidase metabolic pathway may contribute to impaired regulation of arteriole tone in hypertension patients.
