To optimize the efficiency of the linear compressor,its operating frequency must be controlled equal to the system resonant frequency.The traditional resonant frequency tracking control algorithm relies on the steady ...To optimize the efficiency of the linear compressor,its operating frequency must be controlled equal to the system resonant frequency.The traditional resonant frequency tracking control algorithm relies on the steady state characteristics of the system,which suffers from slow convergence speed,low accuracy and slow system response.In order to solve these problems,a novel resonant frequency tracking control for linear compressor based on model reference adaptive system(MRAS)is proposed in this paper,and the parameter adaptive rate is derived by the Popov's hyperstability theory,so that the system resonant frequency can be directly calculated through the parameter adaptive rate.Furthermore,the traditional algorithm needs to calculate the piston stroke signal by integrating the back-EMF,which has the problem of integral drift.The algorithm proposed in this paper only needs the velocity signal,and the accuracy of the velocity calculation can be ensured by utilizing the self-adaptive band-pass filter(SABPF),thereby greatly improving the accuracy of the resonance frequency calculation.Simulation results verify the effectiveness of the proposed algorithm.展开更多
The flexible materials exhibit more favorable properties than most rigid substrates in flexibility,weight saving,mechanical reliability,and excellent environmental toughness.Particularly,flexible graphene film with un...The flexible materials exhibit more favorable properties than most rigid substrates in flexibility,weight saving,mechanical reliability,and excellent environmental toughness.Particularly,flexible graphene film with unique mechanical properties was extensively explored in high frequency devices.Herein,we report the characteristics of structure and magnetic properties at high frequency of Co2FeAl thin film with different thicknesses grown on flexible graphene substrate at room temperature.The exciting finding for the columnar structure of Co2FeAl thin film lays the foundation for excellent high frequency property of Co2FeAl/flexible graphene structure.In-plane magnetic anisotropy field varying with increasing thickness of Co2FeAl thin film can be obtained by measurement of ferromagnetic resonance,which can be ascribed to the enhancement of crystallinity and the increase of grain size.Meanwhile,the resonance frequency which can be achieved by the measurement of vector network analyzer with the microstrip method increases with increasing thickness of Co2FeAl thin film.Moreover,in our case with graphene film,the resonance magnetic field is quite stable though folded for twenty cycles,which demonstrates that good flexibility of graphene film and the stability of high frequency magnetic property of Co2FeAl thin film grown on flexible graphene substrate.These results are promising for the design of microwave devices and wireless communication equipment.展开更多
The objective of this study is to develop a simple tool for predicting the resonant frequency of the piston mode wave oscillation in a moonpool or a narrow gap between twin floating barges.Based on the dynamic analysi...The objective of this study is to develop a simple tool for predicting the resonant frequency of the piston mode wave oscillation in a moonpool or a narrow gap between twin floating barges.Based on the dynamic analysis and the domain-decomposition,a linear harmonic oscillator model for the fluid oscillation in a confined space is formulated,which immediately leads to an explicit dynamic solution for the resonant frequency.In the model,it is assumed that the water depth is equal to or greater than a critical value dependent on the ratio of the draft to the breadth of the floating body.The predicted resonant frequencies are compared with the numerical results of the linear potential model and the viscous fluid model,the semi-analytical potential solutions and the experimental measurements.Good agreements are observed for a wide range of geometric parameters of the moonpool and the narrow gap of either sharp or round edge shapes.The present dynamic method is also applied to predict the resonant frequency of the piston mode oscillation in the gap between a floating body and a vertical wall with a reasonable success.展开更多
Gas-liquid coupling oscillation is a novel approach to reducing the resonant frequency and to elevating the pressure amplitude of a thermoacoustic engine.If a thermoacoustic engine is used to drive low-frequency pulse...Gas-liquid coupling oscillation is a novel approach to reducing the resonant frequency and to elevating the pressure amplitude of a thermoacoustic engine.If a thermoacoustic engine is used to drive low-frequency pulse tube refrigerators,the frequency matching between the thermoacoustic engine and the refrigerator plays an important role.Based on an acoustic-electric analogy,a lumped parameter model is proposed to estimate the resonant frequency of a standing-wave thermoacoustic engine with gas-liquid coupling oscillation.Furthermore,a simplified lumped parameter model is also developed to reduce the computation complexity.The resonant frequency dependence on the mean pressure,the gas space volume,and the water column length is computed and analyzed.The impact of different working gases on the resonant frequency is also discussed.The effectiveness of the models is validated by comparing the computed results with the experimental data of the gas-liquid coupling oscillation system.An increase in the mean working pressure can lead to a rise in the resonant frequency,and a lower resonant frequency can be achieved by elongating the liquid column.In comparison with nitrogen and argon,carbon dioxide can realize a lower frequency due to a smaller specific heat ratio.展开更多
We report on the generation of self-oscillations from a continuously pumped singly resonant frequency doubler based on a periodically poled potassium titanyl phosphate crystal(PPKTP).The sustained square-wave and stai...We report on the generation of self-oscillations from a continuously pumped singly resonant frequency doubler based on a periodically poled potassium titanyl phosphate crystal(PPKTP).The sustained square-wave and staircase curve of self-oscillations are obtained when the incident pump powers are below and above the threshold of subharmonic-pumped parametric oscillation(SPO),respectively.The self-oscillations can be explained by the competition between the phase shifts induced by cascading nonlinearity and thermal effect,and the influence of fundamental nonlinear phase shift by the generation of SPO.The simulation results are in good agreement with the experiment data.展开更多
The small-current grounding fault in distribution network is hard to be located because of its weak fault features.To accurately locate the faults,the transient process is analyzed in this paper.Through the study we t...The small-current grounding fault in distribution network is hard to be located because of its weak fault features.To accurately locate the faults,the transient process is analyzed in this paper.Through the study we take that the main resonant frequency and its corresponding component is related to the fault distance.Based on this,a fault location method based on double-end wavelet energy ratio at the scale corresponding to the main resonant frequency is proposed.And back propagation neural network(BPNN)is selected to fit the non-linear relationship between the wavelet energy ratio and fault distance.The performance of this proposed method has been verified in different scenarios of a simulation model in PSCAD/EMTDC.展开更多
LC circuit resonance frequency measurement often requires the use of professional analysis instruments such as LCR meters,vector network analyzers,but currently such instruments on the market are expensive,and it is d...LC circuit resonance frequency measurement often requires the use of professional analysis instruments such as LCR meters,vector network analyzers,but currently such instruments on the market are expensive,and it is difficult for non-professional institute personnel to access.Here comes unnecessary trouble.In view of this situation,a test method for measuring the resonance frequency using only a digital storage oscilloscope is proposed.Using the impulse signal to obtain the system response,the response waveform period can be observed through the oscilloscope.展开更多
The modelling and determination of the geometric parameters of a solar cell are important data, which influence the evaluation of its performance under specific operating conditions, as well as its industrial developm...The modelling and determination of the geometric parameters of a solar cell are important data, which influence the evaluation of its performance under specific operating conditions, as well as its industrial development for a low cost. In this work, an n+/p/p+ crystalline silicon solar cell is studied under monochromatic illumination in modulation and placed in a constant magnetic field. The minority carriers’ diffusion coefficient (<em>D</em>(<em>ω</em>, <em>B</em>), in the (<em>p</em>) base leads to maximum values (Dmax) at resonance frequencies (<em>ωr</em>). These values are used in expressions of AC minority carriers recombination velocity (Sb(Dmax, H)) in the rear of the base, to extract the optimum thickness while solar cell is subjected to these specific conditions. Optimum thickness modelling relationships, depending respectively on Dmax, <em>ωr</em> and <em>B</em>, are then established, and will be data for industrial development of low-cost solar cells for specific use.展开更多
An acoustically actuated piezoelectric antenna is proposed for low frequency(LF)band in this paper.The proposed antenna is theoretically calculated,numerically optimized by the finite element method(FEM),and experimen...An acoustically actuated piezoelectric antenna is proposed for low frequency(LF)band in this paper.The proposed antenna is theoretically calculated,numerically optimized by the finite element method(FEM),and experimentally analyzed.The measurement results show that the near-field radiation pattern of the piezoelectric antenna is similar to that of the electric dipole antenna.The radiation efficiency of the piezoelectric antenna is 3-4 orders of magnitude higher than that of electrically small antenna(ESA),with their sizes being the same size,and the maximum transmission distance obtained experimentally is 100 cm,which can be improved by increasing the input power.In addition,the gain,directivity,and quality factor of piezoelectric antenna are also analyzed.In this paper,traditional antenna parameters are creatively used to analyze the performance of piezoelectric antenna.The research conclusions can provide reliable theoretical basis for realizing LF antenna miniaturization.展开更多
This paper presents an analytic method that adjusts resonance frequency of a piezoelectric vibration energy harvester. A mathematical model that estimates resonance frequency of cantilever is also proposed. Through mo...This paper presents an analytic method that adjusts resonance frequency of a piezoelectric vibration energy harvester. A mathematical model that estimates resonance frequency of cantilever is also proposed. Through moving an attached mass and changing its weight on the cantilever beam, resonance frequency of adopted piezoelectric device can be adjusted to match the frequency of ambient vibration sources, which is critical in order to harvest maximum amount of energy. The theoretical results are validated by experiments that move different masses along experimental cantilever beams. The results demonstrate that resonance frequency can be adjusted by an attached mass located at different positions on the cantilever beam. Different combinations of operational conditions that harvest maximum amount of energy are also discussed in this paper.展开更多
A compact patch antenna is designed, which is with structures of cross-shape slot, Complementary Split Ring Resonator(CSRR), and loaded transmission line. To implement the compactness in size, these structures are etc...A compact patch antenna is designed, which is with structures of cross-shape slot, Complementary Split Ring Resonator(CSRR), and loaded transmission line. To implement the compactness in size, these structures are etched on the ground plane, then the input impedance has been improved. The CSRR is employed to improve impedance matching between the source and radiation patch, and the cross-shape slot on the radiation patch is utilized to increase the bandwidth. The design is validated by comparison of realistic field simulation with measurement results of an antenna prototype. The presented antenna is much smaller in size than conventional antennas with CSRR, showing good performances at the resonant frequency. The experimental results accord well with simulated results.展开更多
The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutio...The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutions can be reduced to the ones of an elastodynamic problem.Based on the effective medium method,these closedform solutions can be used to establish the self-consistent equations about the frequencydependent effective parameters,which can be numerically solved by iteration.Theoretical predictions are compared with the experimental results,and good agreement can be found.Furthermore,the analyses on the effects of microstructure and wavelength on the effective properties,resonance frequencies,and attenuation are also presented,which may provide some guidance for the microstructure design and analysis of piezoelectric composites.展开更多
The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that ...The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.展开更多
The dynamic elasticity modulus(Ed)is the most commonly used indexes for nondestructive testing to represent the internal damage of hydraulic concrete.Samples with a specific size is required when the transverse resona...The dynamic elasticity modulus(Ed)is the most commonly used indexes for nondestructive testing to represent the internal damage of hydraulic concrete.Samples with a specific size is required when the transverse resonance method was used to detect the Ed,resulting in a limitation for field tests.The impact-echo method can make up defects of traditional detection methods for frost-resistance testing,such as the evaluation via the loss of mass or strength.The feasibility of the impact-echo method to obtain the relative Ed is explored to detect the frost-resistance property of large-volume hydraulic concretes on site.Results show that the impact-echo method can replace the traditional resonance frequency method to evaluate the frost resistance of concrete,and has advantages of high accuracy,easy to operate,and not affecting by the aggregate size and size effect of samples.The dynamic elastic modulus of concrete detected by the impact-echo method has little difference with that obtained by the traditional resonance method.The one-dimensional elastic wave velocity of concrete has a good linear correlation with the transverse resonance frequency.The freeze-thaw damage occurred from the surface to the inner layer,and the surface is expected to be the most vulnerable part for the freeze-thaw damage.It is expected to monitor and track the degradation of the frost resistance of an actual structure by frequently detecting the P-wave velocity on site,which avoids coring again.展开更多
Capacitive micromechanical ultrasonic transducers(CMUTs)have been widely studied because they can be used as substitutes for piezoelectric ultrasonic transducers in imaging applications.However,it is unclear whether a...Capacitive micromechanical ultrasonic transducers(CMUTs)have been widely studied because they can be used as substitutes for piezoelectric ultrasonic transducers in imaging applications.However,it is unclear whether and how CMUTs can be developed for sensors incorporating other functions.For instance,researchers have proposed the use of CMUTs for pressure sensing,but fundamental and practical application issues remain unsolved.This study explored ways in which a pressure sensor can be properly developed based on a CMUT prototype using a simulation approach.A three-dimensional finite element model of CMUTs was designed using the COMSOL Multiphysics software by combining the working principle of CMUTs with pressure sensing characteristics in which the resonance frequency of the CMUT cell shifts accordingly when it is subjected to an external pressure.Simultaneously,when subjected to pressure,the CMUT membrane deforms,thus the pressure can be reflected by the change in the capacitance.展开更多
In this work, we investigated the influence of phosphorus and magnetic anneal on the soft magnetic properties of electrodeposited FeMnP alloy films prepared by changing sodium hypophosphite concentrations. X-ray diffr...In this work, we investigated the influence of phosphorus and magnetic anneal on the soft magnetic properties of electrodeposited FeMnP alloy films prepared by changing sodium hypophosphite concentrations. X-ray diffraction radiation patterns showed an amorphous structure of electrodeposited alloy films. The saturation magnetization and coercivity value decreased from 586 emu/cc to 346 emu/cc, and 52 Oe to 18 Oe, with the P content increased, respectively. The absorption resonance peak became broad as the P content increased, and the natural resonance frequency decreased from 1.8 GHz to 0.6 GHz, with the P content increasing. Magnetic annealing of samples reduced the magnetic damping, and natural resonance frequency increased by about 1.8 GHz and 3.5 GHz for the sample with lower and higher P content. The film structure with lower P content changed at 300˚C, while the structure remains unchanged for the films with higher P content. Thus, the crystallization temperature could depend on the P content in the film. FeMnP alloy films could be used in high-frequency devices.展开更多
High gain antennas are highly desirable for long-range wireless communication systems.In this paper,a compact,low profile,and high gain dielectric resonator antenna is proposed,fabricated,experimentally tested,and ver...High gain antennas are highly desirable for long-range wireless communication systems.In this paper,a compact,low profile,and high gain dielectric resonator antenna is proposed,fabricated,experimentally tested,and verified.The proposed antenna system has a cylindrical dielectric resonator antenna with a height of 9 mm and a radius of 6.35 mm as a radiating element.The proposed dielectric resonator antenna is sourced with a slot while the slot is excited with a rectangular microstrip transmission line.The microstrip transmission line is designed for a 50impedance to provide maximum power to the slot.As a result,the proposed antenna operates at 5.15 GHz with a 10-dB absolute bandwidth of 430 MHz(4.98–5.41 GHz).It is important to mention that the gain of the dielectric resonator antenna is enhanced by the introduction of an electromagnetic bandgap(EBG)structure.In fact,EBG units are placed below the antenna,which enhances the realized peak gain from 5.32 dBi to 8.36 dBi at 5.15 GHz.More specifically,a gain enhancement of 3.04 dB is observed with the introduction of the EBG array.This antenna has several good features such as high gain,compact size,large bandwidth,and lower losses which make it a suitable choice for long-range wireless communication systems.展开更多
Efficiently converting the random vibration energy widely existed in human activities and natural environments into electricity is significant to the local power supply of sensor nodes in the internet of things.Howeve...Efficiently converting the random vibration energy widely existed in human activities and natural environments into electricity is significant to the local power supply of sensor nodes in the internet of things.However,the conversion efficiency of energy harvester is relatively low due to the limitation of device’s intrinsic frequency.In this work,a multi-layered,wavy super-structuredtriboelectric nanogenerator(SS-TENG)is designed,whose output performances can be greatly promoted by combining the charge excitation mechanism.The steel sheet acts not only as an electrode but also as a supporter for the overall frame of SSTENG,which effectively improves the space utilization rate and results in a volume charge density up to 129 mC·m^(−3).In addition,the resonant frequency width of the SS-TENG can be widened by changing the parameters of the superstructure.For demonstration,the SS-TENG can sustainably drive two temperature and humidity sensors in parallel by harvesting vibration energy.This work may provide an effective strategy for harvesting vibration energy and broadening frequency response.展开更多
As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical def...As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.展开更多
The malignant processes deviate from the healthy homeostatic control, and various “tricks” enable malignant cells to avoid the healthy regulation. Consequently, the malignant structures miss the apoptosis and prolif...The malignant processes deviate from the healthy homeostatic control, and various “tricks” enable malignant cells to avoid the healthy regulation. Consequently, the malignant structures miss the apoptosis and proliferate without restriction, and without the formation of communication networks in the newly formed cells. The modulation supports the homeostatic control to rearrange the health regulation processes in various ways. The modulation acts with stochastic processes, using stochastic resonances for molecular excitations, supporting the regulative enzymatic processes. The number of stochastic resonant frequencies is as many as the number of enzymatic reactions. The malignant cells differ structurally and dynamically in their connections and interactions from their healthy host tissues. The radiofrequency carrier is modulated with an appropriate time-fractal (1/f) noise to select the autonomic cancer-cells, destroy them, or force the precancerous, semi-individual cells to participate in the networking connections. The modulation in this way limits the cellular autonomy of malignant cells and boosts the healthy control. The resonant energy triggers apoptotic processes and helps immunogenic actions deliver extracellular genetic information for antigen-presentation. The modulation is applied in clinical practice. The therapy (modulated electro-hyperthermia, mEHT) is intensively used in oncology in complementary applications and for palliative stages, and occasionally even as a monotherapy.展开更多
基金supported in part by the National Natural Science Foundation of China under Grants 51877093 and 51707079in part by the National Key Research and Development Program of China under Grant 2018YFE0100200in part by the Key Technical Innovation Program of Hubei Province under Grant 2019AAA026.
文摘To optimize the efficiency of the linear compressor,its operating frequency must be controlled equal to the system resonant frequency.The traditional resonant frequency tracking control algorithm relies on the steady state characteristics of the system,which suffers from slow convergence speed,low accuracy and slow system response.In order to solve these problems,a novel resonant frequency tracking control for linear compressor based on model reference adaptive system(MRAS)is proposed in this paper,and the parameter adaptive rate is derived by the Popov's hyperstability theory,so that the system resonant frequency can be directly calculated through the parameter adaptive rate.Furthermore,the traditional algorithm needs to calculate the piston stroke signal by integrating the back-EMF,which has the problem of integral drift.The algorithm proposed in this paper only needs the velocity signal,and the accuracy of the velocity calculation can be ensured by utilizing the self-adaptive band-pass filter(SABPF),thereby greatly improving the accuracy of the resonance frequency calculation.Simulation results verify the effectiveness of the proposed algorithm.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51901163 and 12104171)the Fundamental Research Funds for the Central Universities(Grant No.2021XXJS025).
文摘The flexible materials exhibit more favorable properties than most rigid substrates in flexibility,weight saving,mechanical reliability,and excellent environmental toughness.Particularly,flexible graphene film with unique mechanical properties was extensively explored in high frequency devices.Herein,we report the characteristics of structure and magnetic properties at high frequency of Co2FeAl thin film with different thicknesses grown on flexible graphene substrate at room temperature.The exciting finding for the columnar structure of Co2FeAl thin film lays the foundation for excellent high frequency property of Co2FeAl/flexible graphene structure.In-plane magnetic anisotropy field varying with increasing thickness of Co2FeAl thin film can be obtained by measurement of ferromagnetic resonance,which can be ascribed to the enhancement of crystallinity and the increase of grain size.Meanwhile,the resonance frequency which can be achieved by the measurement of vector network analyzer with the microstrip method increases with increasing thickness of Co2FeAl thin film.Moreover,in our case with graphene film,the resonance magnetic field is quite stable though folded for twenty cycles,which demonstrates that good flexibility of graphene film and the stability of high frequency magnetic property of Co2FeAl thin film grown on flexible graphene substrate.These results are promising for the design of microwave devices and wireless communication equipment.
基金Project supported by the National Nature Science Foundation of China(Grant No.51490673)the National Key R&D Program of China(Project ID:2016YFE0200100).
文摘The objective of this study is to develop a simple tool for predicting the resonant frequency of the piston mode wave oscillation in a moonpool or a narrow gap between twin floating barges.Based on the dynamic analysis and the domain-decomposition,a linear harmonic oscillator model for the fluid oscillation in a confined space is formulated,which immediately leads to an explicit dynamic solution for the resonant frequency.In the model,it is assumed that the water depth is equal to or greater than a critical value dependent on the ratio of the draft to the breadth of the floating body.The predicted resonant frequencies are compared with the numerical results of the linear potential model and the viscous fluid model,the semi-analytical potential solutions and the experimental measurements.Good agreements are observed for a wide range of geometric parameters of the moonpool and the narrow gap of either sharp or round edge shapes.The present dynamic method is also applied to predict the resonant frequency of the piston mode oscillation in the gap between a floating body and a vertical wall with a reasonable success.
基金Project supported by the National Natural Science Foundation of China (No.50806065)the Research Fund for the Doctoral Program of Higher Education of China (No.200803351053)
文摘Gas-liquid coupling oscillation is a novel approach to reducing the resonant frequency and to elevating the pressure amplitude of a thermoacoustic engine.If a thermoacoustic engine is used to drive low-frequency pulse tube refrigerators,the frequency matching between the thermoacoustic engine and the refrigerator plays an important role.Based on an acoustic-electric analogy,a lumped parameter model is proposed to estimate the resonant frequency of a standing-wave thermoacoustic engine with gas-liquid coupling oscillation.Furthermore,a simplified lumped parameter model is also developed to reduce the computation complexity.The resonant frequency dependence on the mean pressure,the gas space volume,and the water column length is computed and analyzed.The impact of different working gases on the resonant frequency is also discussed.The effectiveness of the models is validated by comparing the computed results with the experimental data of the gas-liquid coupling oscillation system.An increase in the mean working pressure can lead to a rise in the resonant frequency,and a lower resonant frequency can be achieved by elongating the liquid column.In comparison with nitrogen and argon,carbon dioxide can realize a lower frequency due to a smaller specific heat ratio.
基金supported by the National Basic Research Program of China (Grant No. 2010CB923101)the National Natural Science Foundation of China (Grant Nos. 61227015 and 61121064)
文摘We report on the generation of self-oscillations from a continuously pumped singly resonant frequency doubler based on a periodically poled potassium titanyl phosphate crystal(PPKTP).The sustained square-wave and staircase curve of self-oscillations are obtained when the incident pump powers are below and above the threshold of subharmonic-pumped parametric oscillation(SPO),respectively.The self-oscillations can be explained by the competition between the phase shifts induced by cascading nonlinearity and thermal effect,and the influence of fundamental nonlinear phase shift by the generation of SPO.The simulation results are in good agreement with the experiment data.
基金supported by National Key R&D Program of China(2017YFB0902800)Science and 333 Technology Project of State Grid Corporation of China(52094017003D).
文摘The small-current grounding fault in distribution network is hard to be located because of its weak fault features.To accurately locate the faults,the transient process is analyzed in this paper.Through the study we take that the main resonant frequency and its corresponding component is related to the fault distance.Based on this,a fault location method based on double-end wavelet energy ratio at the scale corresponding to the main resonant frequency is proposed.And back propagation neural network(BPNN)is selected to fit the non-linear relationship between the wavelet energy ratio and fault distance.The performance of this proposed method has been verified in different scenarios of a simulation model in PSCAD/EMTDC.
文摘LC circuit resonance frequency measurement often requires the use of professional analysis instruments such as LCR meters,vector network analyzers,but currently such instruments on the market are expensive,and it is difficult for non-professional institute personnel to access.Here comes unnecessary trouble.In view of this situation,a test method for measuring the resonance frequency using only a digital storage oscilloscope is proposed.Using the impulse signal to obtain the system response,the response waveform period can be observed through the oscilloscope.
文摘The modelling and determination of the geometric parameters of a solar cell are important data, which influence the evaluation of its performance under specific operating conditions, as well as its industrial development for a low cost. In this work, an n+/p/p+ crystalline silicon solar cell is studied under monochromatic illumination in modulation and placed in a constant magnetic field. The minority carriers’ diffusion coefficient (<em>D</em>(<em>ω</em>, <em>B</em>), in the (<em>p</em>) base leads to maximum values (Dmax) at resonance frequencies (<em>ωr</em>). These values are used in expressions of AC minority carriers recombination velocity (Sb(Dmax, H)) in the rear of the base, to extract the optimum thickness while solar cell is subjected to these specific conditions. Optimum thickness modelling relationships, depending respectively on Dmax, <em>ωr</em> and <em>B</em>, are then established, and will be data for industrial development of low-cost solar cells for specific use.
文摘An acoustically actuated piezoelectric antenna is proposed for low frequency(LF)band in this paper.The proposed antenna is theoretically calculated,numerically optimized by the finite element method(FEM),and experimentally analyzed.The measurement results show that the near-field radiation pattern of the piezoelectric antenna is similar to that of the electric dipole antenna.The radiation efficiency of the piezoelectric antenna is 3-4 orders of magnitude higher than that of electrically small antenna(ESA),with their sizes being the same size,and the maximum transmission distance obtained experimentally is 100 cm,which can be improved by increasing the input power.In addition,the gain,directivity,and quality factor of piezoelectric antenna are also analyzed.In this paper,traditional antenna parameters are creatively used to analyze the performance of piezoelectric antenna.The research conclusions can provide reliable theoretical basis for realizing LF antenna miniaturization.
文摘This paper presents an analytic method that adjusts resonance frequency of a piezoelectric vibration energy harvester. A mathematical model that estimates resonance frequency of cantilever is also proposed. Through moving an attached mass and changing its weight on the cantilever beam, resonance frequency of adopted piezoelectric device can be adjusted to match the frequency of ambient vibration sources, which is critical in order to harvest maximum amount of energy. The theoretical results are validated by experiments that move different masses along experimental cantilever beams. The results demonstrate that resonance frequency can be adjusted by an attached mass located at different positions on the cantilever beam. Different combinations of operational conditions that harvest maximum amount of energy are also discussed in this paper.
基金Hebei Provincial Education Department Youth Fund(QN2017114)。
文摘A compact patch antenna is designed, which is with structures of cross-shape slot, Complementary Split Ring Resonator(CSRR), and loaded transmission line. To implement the compactness in size, these structures are etched on the ground plane, then the input impedance has been improved. The CSRR is employed to improve impedance matching between the source and radiation patch, and the cross-shape slot on the radiation patch is utilized to increase the bandwidth. The design is validated by comparison of realistic field simulation with measurement results of an antenna prototype. The presented antenna is much smaller in size than conventional antennas with CSRR, showing good performances at the resonant frequency. The experimental results accord well with simulated results.
基金Project supported by the National Natural Science Foundation of China(No.12072240)。
文摘The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutions can be reduced to the ones of an elastodynamic problem.Based on the effective medium method,these closedform solutions can be used to establish the self-consistent equations about the frequencydependent effective parameters,which can be numerically solved by iteration.Theoretical predictions are compared with the experimental results,and good agreement can be found.Furthermore,the analyses on the effects of microstructure and wavelength on the effective properties,resonance frequencies,and attenuation are also presented,which may provide some guidance for the microstructure design and analysis of piezoelectric composites.
文摘The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.
基金Hainan Provincial Natural Science Foundation of China(522QN279)Research Lab Construction of Hainan University(ZY2019HN0904).
文摘The dynamic elasticity modulus(Ed)is the most commonly used indexes for nondestructive testing to represent the internal damage of hydraulic concrete.Samples with a specific size is required when the transverse resonance method was used to detect the Ed,resulting in a limitation for field tests.The impact-echo method can make up defects of traditional detection methods for frost-resistance testing,such as the evaluation via the loss of mass or strength.The feasibility of the impact-echo method to obtain the relative Ed is explored to detect the frost-resistance property of large-volume hydraulic concretes on site.Results show that the impact-echo method can replace the traditional resonance frequency method to evaluate the frost resistance of concrete,and has advantages of high accuracy,easy to operate,and not affecting by the aggregate size and size effect of samples.The dynamic elastic modulus of concrete detected by the impact-echo method has little difference with that obtained by the traditional resonance method.The one-dimensional elastic wave velocity of concrete has a good linear correlation with the transverse resonance frequency.The freeze-thaw damage occurred from the surface to the inner layer,and the surface is expected to be the most vulnerable part for the freeze-thaw damage.It is expected to monitor and track the degradation of the frost resistance of an actual structure by frequently detecting the P-wave velocity on site,which avoids coring again.
文摘Capacitive micromechanical ultrasonic transducers(CMUTs)have been widely studied because they can be used as substitutes for piezoelectric ultrasonic transducers in imaging applications.However,it is unclear whether and how CMUTs can be developed for sensors incorporating other functions.For instance,researchers have proposed the use of CMUTs for pressure sensing,but fundamental and practical application issues remain unsolved.This study explored ways in which a pressure sensor can be properly developed based on a CMUT prototype using a simulation approach.A three-dimensional finite element model of CMUTs was designed using the COMSOL Multiphysics software by combining the working principle of CMUTs with pressure sensing characteristics in which the resonance frequency of the CMUT cell shifts accordingly when it is subjected to an external pressure.Simultaneously,when subjected to pressure,the CMUT membrane deforms,thus the pressure can be reflected by the change in the capacitance.
文摘In this work, we investigated the influence of phosphorus and magnetic anneal on the soft magnetic properties of electrodeposited FeMnP alloy films prepared by changing sodium hypophosphite concentrations. X-ray diffraction radiation patterns showed an amorphous structure of electrodeposited alloy films. The saturation magnetization and coercivity value decreased from 586 emu/cc to 346 emu/cc, and 52 Oe to 18 Oe, with the P content increased, respectively. The absorption resonance peak became broad as the P content increased, and the natural resonance frequency decreased from 1.8 GHz to 0.6 GHz, with the P content increasing. Magnetic annealing of samples reduced the magnetic damping, and natural resonance frequency increased by about 1.8 GHz and 3.5 GHz for the sample with lower and higher P content. The film structure with lower P content changed at 300˚C, while the structure remains unchanged for the films with higher P content. Thus, the crystallization temperature could depend on the P content in the film. FeMnP alloy films could be used in high-frequency devices.
基金The author would like to thank the Deanship of Scientific Research at Majmaah Universty,Kingdom of Saudi Arabia for supporting this work(R-2021-211).
文摘High gain antennas are highly desirable for long-range wireless communication systems.In this paper,a compact,low profile,and high gain dielectric resonator antenna is proposed,fabricated,experimentally tested,and verified.The proposed antenna system has a cylindrical dielectric resonator antenna with a height of 9 mm and a radius of 6.35 mm as a radiating element.The proposed dielectric resonator antenna is sourced with a slot while the slot is excited with a rectangular microstrip transmission line.The microstrip transmission line is designed for a 50impedance to provide maximum power to the slot.As a result,the proposed antenna operates at 5.15 GHz with a 10-dB absolute bandwidth of 430 MHz(4.98–5.41 GHz).It is important to mention that the gain of the dielectric resonator antenna is enhanced by the introduction of an electromagnetic bandgap(EBG)structure.In fact,EBG units are placed below the antenna,which enhances the realized peak gain from 5.32 dBi to 8.36 dBi at 5.15 GHz.More specifically,a gain enhancement of 3.04 dB is observed with the introduction of the EBG array.This antenna has several good features such as high gain,compact size,large bandwidth,and lower losses which make it a suitable choice for long-range wireless communication systems.
基金the National Key Research and Development Program(No.2021YFA1201602)the NSFC(No.62004017)+3 种基金the Fundamental Research Funds for the Central Universities(No.2021CDJQY-019)the Graduate Research and Innovation Foundation of Chongqing,China(No.CYB22047)J.C.also wants to acknowledge the supports from the Natural Science Foundation of Chongqing(No.cstc2021jcyjmsxmX0746)the Scientific Research Project of Chongqing Education Committee(No.KJQN202100522).
文摘Efficiently converting the random vibration energy widely existed in human activities and natural environments into electricity is significant to the local power supply of sensor nodes in the internet of things.However,the conversion efficiency of energy harvester is relatively low due to the limitation of device’s intrinsic frequency.In this work,a multi-layered,wavy super-structuredtriboelectric nanogenerator(SS-TENG)is designed,whose output performances can be greatly promoted by combining the charge excitation mechanism.The steel sheet acts not only as an electrode but also as a supporter for the overall frame of SSTENG,which effectively improves the space utilization rate and results in a volume charge density up to 129 mC·m^(−3).In addition,the resonant frequency width of the SS-TENG can be widened by changing the parameters of the superstructure.For demonstration,the SS-TENG can sustainably drive two temperature and humidity sensors in parallel by harvesting vibration energy.This work may provide an effective strategy for harvesting vibration energy and broadening frequency response.
基金This work was in part supported by the International Partnership Program of Chinese Academy of Science(Grant No.154232KYSB20200016)the Suzhou Science and Technology Support Project(Grant No.SYG201905)+2 种基金the National Key Research and Development Program of China(Grant No.2020YFC2007400)H.C.acknowledges the supports provided by the National Science Foundation(NSF)(Grant No.ECCS-1933072)the National Heart,Lung,And Blood Institute of the National Institutes of Health under Award Number R61HL154215,and Penn State University.The partial support from the Center for Biodevices,the College of Engineering,and the Center for Security Research and Education at Penn State is also acknowledged.
文摘As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.
文摘The malignant processes deviate from the healthy homeostatic control, and various “tricks” enable malignant cells to avoid the healthy regulation. Consequently, the malignant structures miss the apoptosis and proliferate without restriction, and without the formation of communication networks in the newly formed cells. The modulation supports the homeostatic control to rearrange the health regulation processes in various ways. The modulation acts with stochastic processes, using stochastic resonances for molecular excitations, supporting the regulative enzymatic processes. The number of stochastic resonant frequencies is as many as the number of enzymatic reactions. The malignant cells differ structurally and dynamically in their connections and interactions from their healthy host tissues. The radiofrequency carrier is modulated with an appropriate time-fractal (1/f) noise to select the autonomic cancer-cells, destroy them, or force the precancerous, semi-individual cells to participate in the networking connections. The modulation in this way limits the cellular autonomy of malignant cells and boosts the healthy control. The resonant energy triggers apoptotic processes and helps immunogenic actions deliver extracellular genetic information for antigen-presentation. The modulation is applied in clinical practice. The therapy (modulated electro-hyperthermia, mEHT) is intensively used in oncology in complementary applications and for palliative stages, and occasionally even as a monotherapy.