The transplanting arm of two-arm transplanting mechanism is easy to cause seedlings injury and missing due to its faster speed relative to the seedlings.In order to solve the existed problems,a three-arm transplanting...The transplanting arm of two-arm transplanting mechanism is easy to cause seedlings injury and missing due to its faster speed relative to the seedlings.In order to solve the existed problems,a three-arm transplanting mechanism for rice potted seedlings was developed in this study.The developed three-arm transplanting mechanism for rice potted seedling can make the transplanting arm realize special trajectory and attitude through the unequal planetary gear transmission.The kinematic model of three-arm transplanting mechanism for rice potted seedling was established,and the optimal design software was developed.Based on the heuristic optimization algorithm named“parameter guide”,a set of satisfied mechanism parameters required by the rice potted seedling transplanting were obtained.The trajectory and attitude of three-arm transplanting mechanism used for the rice potted seedling were analyzed.Besides,the virtual simulation results were basically consistent with the optimization software results,and the correctness of theoretical analysis and virtual simulation were also verified by each other.When the developed transplanting mechanism picked up the seedling,the velocity of transplanting arm relative to the seedling was reduced by about 30%.The results showed that the injury rate of rice potted seedling transplanting mechanism was 0.04%,the missing rate of seedling was 1.4%,the integrity rate of seedling pot matrix was 96%,and the success rate of picking seedling was 99.92%.展开更多
The existing moving box mechanism pot seedling transplanting machine on the market moves too fast when the picked seedling is collected,which negatively impacts the seedling picking performance.In order to improve the...The existing moving box mechanism pot seedling transplanting machine on the market moves too fast when the picked seedling is collected,which negatively impacts the seedling picking performance.In order to improve the performance,two types of variable speed continuous moving box schemes were designed in this study.The first scheme was to apply a spiral-gear moving box spiral shaft with sine curve characteristics in the box moving mechanism,whereas the second one was to change the circular gear in the moving box into an elliptical gear with a speed shifting transmission mechanism.The working mechanism of the mechanical structure was analyzed,and the kinematic model was established.A dynamic analysis of the slider mechanism was performed.A virtual prototype was established according to agronomic parameters,and the virtual prototype experiments were conducted in ADAMS.The physical prototype and the high-speed photography experiment were performed on the test bench of a transplanting machine frame.The theoretical analysis,virtual prototype and physical prototype test results were consistent,which verified the validity of the theoretical model,virtual prototype and physical prototype and ensured the feasibility of the system.展开更多
To design a clamping-pot-type wide-narrow-row pot seedling transplanting(WPST)mechanism with desired spatial beak-shaped trajectory and working posture,a new design method of planetary gear train transplanting mechani...To design a clamping-pot-type wide-narrow-row pot seedling transplanting(WPST)mechanism with desired spatial beak-shaped trajectory and working posture,a new design method of planetary gear train transplanting mechanism(PGTM)with non-circular gears based on several key spatial poses(position and posture)was proposed.The PGTM was simplified to a spatial open-loop chain with two-revolute(2R)joints.The geometric constraint equations containing only the structural parameters of the chain were then established on the basis of the three key spatial poses,and the homotopy algorithm was used to obtain all the required parameters of the mechanism.In accordance with the parameters obtained,the relative angular displacement relation between the planet carrier and the transplanting arm was optimized,the trajectory of the mechanism was replayed,and the total transmission ratio was determined.The degree of freedom of the spatial 2R mechanism was reduced by attaching to the unequal gear pair,and the transmission ratio was distributed in accordance with the gear type to realize the design of a non-circular gear pitch curve.Lastly,a clamping-pot-type PGTM for rice WPST driven by the combination of planar non-circular and non-conical gears was designed,and virtual simulation and prototype test were conducted.Results showed that the simulation and prototype test trajectories were consistent with the desired trajectory.Under the operating speeds of 50 r/min and 90 r/min,the success rates of seedling picking were 95.32%and 90.15%,respectively,which verified the feasibility of the theoretical method.This method could provide a reference for the design of a spatial PGTM with nonuniform transmission.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52005221)the Natural Science Foundation of Jiangsu Province(Grant No.BK20200897)the China Postdoctoral Science Foundation(Grant No.2021M691315).
文摘The transplanting arm of two-arm transplanting mechanism is easy to cause seedlings injury and missing due to its faster speed relative to the seedlings.In order to solve the existed problems,a three-arm transplanting mechanism for rice potted seedlings was developed in this study.The developed three-arm transplanting mechanism for rice potted seedling can make the transplanting arm realize special trajectory and attitude through the unequal planetary gear transmission.The kinematic model of three-arm transplanting mechanism for rice potted seedling was established,and the optimal design software was developed.Based on the heuristic optimization algorithm named“parameter guide”,a set of satisfied mechanism parameters required by the rice potted seedling transplanting were obtained.The trajectory and attitude of three-arm transplanting mechanism used for the rice potted seedling were analyzed.Besides,the virtual simulation results were basically consistent with the optimization software results,and the correctness of theoretical analysis and virtual simulation were also verified by each other.When the developed transplanting mechanism picked up the seedling,the velocity of transplanting arm relative to the seedling was reduced by about 30%.The results showed that the injury rate of rice potted seedling transplanting mechanism was 0.04%,the missing rate of seedling was 1.4%,the integrity rate of seedling pot matrix was 96%,and the success rate of picking seedling was 99.92%.
基金supported by the National Key Research and Development Program of the 13th Five-year Plan(Grant No.2017YFD070802-2)the China Special Fund for Agro-Scientific Research in the Public Interest(Grant No.201203059-01)+3 种基金the National Key Technology R&D Program(Grant No.2014BAD06B-1-05)the Open Fund Projects of Zhejiang Province Planting Equipment Technology Key Laboratory(Grant No.2013E10013-06)the National Natural Science Foundation of China(Grant No.51775104)by the National Key Technology R&D Program(Grant No.2014BAD06B01-13).
文摘The existing moving box mechanism pot seedling transplanting machine on the market moves too fast when the picked seedling is collected,which negatively impacts the seedling picking performance.In order to improve the performance,two types of variable speed continuous moving box schemes were designed in this study.The first scheme was to apply a spiral-gear moving box spiral shaft with sine curve characteristics in the box moving mechanism,whereas the second one was to change the circular gear in the moving box into an elliptical gear with a speed shifting transmission mechanism.The working mechanism of the mechanical structure was analyzed,and the kinematic model was established.A dynamic analysis of the slider mechanism was performed.A virtual prototype was established according to agronomic parameters,and the virtual prototype experiments were conducted in ADAMS.The physical prototype and the high-speed photography experiment were performed on the test bench of a transplanting machine frame.The theoretical analysis,virtual prototype and physical prototype test results were consistent,which verified the validity of the theoretical model,virtual prototype and physical prototype and ensured the feasibility of the system.
基金This work was supported by the National Key Research and Development Program of China(Grant No.2018YFD0700703)the National Natural Science Foundation of China(Grant No.51975534,51675487)+2 种基金the Zhejiang Provincial Key Research and Development Program(Grant No.2018C02046)the Natural Science Foundation of Zhejiang Province(Grant No.LY19E050021)the 151 Talent Plan of Zhejiang Province,and the Project of Zhejiang Provincial Young and Middle-aged Discipline Leaders.
文摘To design a clamping-pot-type wide-narrow-row pot seedling transplanting(WPST)mechanism with desired spatial beak-shaped trajectory and working posture,a new design method of planetary gear train transplanting mechanism(PGTM)with non-circular gears based on several key spatial poses(position and posture)was proposed.The PGTM was simplified to a spatial open-loop chain with two-revolute(2R)joints.The geometric constraint equations containing only the structural parameters of the chain were then established on the basis of the three key spatial poses,and the homotopy algorithm was used to obtain all the required parameters of the mechanism.In accordance with the parameters obtained,the relative angular displacement relation between the planet carrier and the transplanting arm was optimized,the trajectory of the mechanism was replayed,and the total transmission ratio was determined.The degree of freedom of the spatial 2R mechanism was reduced by attaching to the unequal gear pair,and the transmission ratio was distributed in accordance with the gear type to realize the design of a non-circular gear pitch curve.Lastly,a clamping-pot-type PGTM for rice WPST driven by the combination of planar non-circular and non-conical gears was designed,and virtual simulation and prototype test were conducted.Results showed that the simulation and prototype test trajectories were consistent with the desired trajectory.Under the operating speeds of 50 r/min and 90 r/min,the success rates of seedling picking were 95.32%and 90.15%,respectively,which verified the feasibility of the theoretical method.This method could provide a reference for the design of a spatial PGTM with nonuniform transmission.
