BACKGROUND Chronic large to massive rotator cuff tears are difficult to treat and re-tears are common even after surgical repair.We propose using a synthetic polypropylene mesh to increase the tensile strength of rota...BACKGROUND Chronic large to massive rotator cuff tears are difficult to treat and re-tears are common even after surgical repair.We propose using a synthetic polypropylene mesh to increase the tensile strength of rotator cuff repairs.We hypothesize that using a polypropylene mesh to bridge the repair of large rotator cuff tears will increase the ultimate failure load of the repair.AIM To investigate the mechanical properties of rotator cuff tears repaired with a polypropylene interposition graft in an ovine ex-vivo model.METHODS A 20 mm length of infraspinatus tendon was resected from fifteen fresh sheep shoulders to simulate a large tear.We used a polypropylene mesh as an interposition graft between the ends of the tendon for repair.In seven specimens,the mesh was secured to remnant tendon by continuous stitching while mattress stitches were used for eight specimens.Five specimens with an intact tendon were tested.The specimens underwent cyclic loading to determine the ultimate failure load and gap formation.RESULTS The mean gap formation after 3000 cycles was 1.67 mm in the continuous group,and 4.16 mm in the mattress group(P=0.001).The mean ultimate failure load was significantly higher at 549.2 N in the continuous group,426.4 N in the mattress group and 370 N in the intact group(P=0.003).CONCLUSION The use of a polypropylene mesh is biomechanically suitable as an interposition graft for large irreparable rotator cuff tears.展开更多
Objective: To further understand what factors should be considered when deciding to do mini-open versus arthroscopic rotator cuff repair. Methods: A systematic literature search on the computer was done with the help ...Objective: To further understand what factors should be considered when deciding to do mini-open versus arthroscopic rotator cuff repair. Methods: A systematic literature search on the computer was done with the help of the PubMed database. Of the articles searched through, three have been chosen to specifically address topics of interest concerning the factors affecting arthroscopic vs mini-open RCR surgical approaches. Discussion: As we continue to progress down the line of factors impacting a clinician’s decision making, we begin to see how postoperative management is unchanged. Tear severity lacks sufficient evidence to base a decision on, but financial, educational, and logistical factors are proven to play a significant role in this decision. Conclusion: As of right now it seems that mini-open RCR is the most cost and time efficient method, especially amongst non-fellowship trained surgeons or ones with lower volume of shoulder scopes. However, further studies should be done to examine cost and efficiency in Sport Medicine fellowship trained orthopedic surgeons to validate these findings.展开更多
Despite transosseous rotator cuff tear repair using sutures is widely accepted for tendon-bone fixation,the fibrocartilaginous enthesis regeneration is still hardly achieved with the traditional sutures.In the present...Despite transosseous rotator cuff tear repair using sutures is widely accepted for tendon-bone fixation,the fibrocartilaginous enthesis regeneration is still hardly achieved with the traditional sutures.In the present work,degradable magnesium(Mg)alloy wire was applied to suture supraspinatus tendon in a rat acute rotator cuff tear model with Vicryl Plus 4±0 absorbable suture as control.The shoulder joint humerus-supraspinatus tendon complex specimens were retrieved at 4,8,and 12 weeks after operation.The Mg alloy suture groups showed better biomechanical properties in terms of ultimate load to failure.Gross observation showed that hyperplastic response of the scar tissue at the tendon-bone interface is progressively alleviated over time in the both Mg alloy suture and Vicryl suture groups.In the histological analysis,for Mg alloy suture groups,chondrocytes appear to proliferate at 4 weeks postoperatively,and the tendon-bone interface showed an orderly structural transition zone at 8 weeks postoperatively.The collagenous fiber tended to be aligned and the tendon-bone interlocking structures apparently formed,where transitional structure from unmineralized fibrocartilage to mineralized fibrocartilage was closer to the native fibrocartilaginous enthesis.In vivo degradation of the magnesium alloy wire was completed within 12 weeks.The results indicated that Mg alloy wire was promising as degradable suture with the potential to promotes fibrocartilaginous interface regeneration in rotator cuff repair.展开更多
BACKGROUND Rotator cuff pathology is a very common source of shoulder pain.Similarly,osteoarthritis of the glenohumeral joint can cause shoulder pain and produce similar symptoms.Surgical management can be indicated f...BACKGROUND Rotator cuff pathology is a very common source of shoulder pain.Similarly,osteoarthritis of the glenohumeral joint can cause shoulder pain and produce similar symptoms.Surgical management can be indicated for both pathologies,however,outcomes data is limited when examining rotator cuff repair(RCR) in the setting of glenohumeral arthritis(GHOA).Thus,this study sought to determine outcomes for patients who undergo RCR in the setting of GHOA.AIM To evaluate if a relationship exists between outcomes of RCR in the setting of GHOA.METHODS This was a retrospective analysis of patients who underwent arthroscopic rotator cuff repair with concurrent glenohumeral osteoarthritis between 2010-2017.Patients were stratified based on rotator cuff tear size and glenohumeral osteoarthritis severity.Cohorts were paired 1:1 with patients without glenohumeral osteoarthritis.Patients included had a minimum two year follow-up.Rate of conversion to total shoulder arthroplasty,complication rates following initial surgery,and patient-reported outcome measures were collected.RESULTS A total of 142 patients were included.The number of patients that required total shoulder arthroplasty within two years after index surgery was low.2/71(2.8%) patients with GHOA,and 1/71(1.4%) without GHOA.Following rotator cuff repair,both groups showed favorable patientreported outcomes.CONCLUSION Patients with glenohumeral osteoarthritis who underwent arthroscopic rotator cuff repair showed comparable outcomes to patients without glenohumeral osteoarthritis.展开更多
BACKGROUND Superior capsular reconstruction(SCR)with long head of biceps tendon(LHBT)transposition was developed to massive and irreparable rotator cuff tears(MIRCTs);however,the outcomes of this technique remain uncl...BACKGROUND Superior capsular reconstruction(SCR)with long head of biceps tendon(LHBT)transposition was developed to massive and irreparable rotator cuff tears(MIRCTs);however,the outcomes of this technique remain unclear.AIM To perform a systematic review of biomechanical outcomes and a meta-analysis of clinical outcomes after LHBT transposition for MIRCTs.METHODS We performed a systematic electronic database search on PubMed,EMBASE,and Cochrane Library.Studies of SCR with LHBT transposition were included according to the inclusion and exclusion criteria.Biomechanical studies were assessed for main results and conclusions.Included clinical studies were evaluated for quality of methodology.Data including study characteristics,cohort demographics,and outcomes were extracted.A meta-analysis was conducted of the clinical outcomes.RESULTS According to our inclusion and exclusion criteria,a total of six biomechanical studies were identified and reported an overall improvement in subacromial contact pressures and prevention of superior humeral migration without limiting range of motion(ROM)after LHBT transposition for MIRCTs.A total of five clinical studies were included in the meta-analysis of LHBT transposition outcomes,consisting of 253 patients.The results indicated that compared to other surgical methods for MIRCTs,LHBT transposition had advantages of more significant improvement in ROM(forward flexion mean difference[MD]=6.54,95%confidence interval[CI]:3.07-10.01;external rotation[MD=5.15,95%CI:1.59-8.17];the acromiohumeral distance[AHD][MD=0.90,95%CI:0.21-1.59])and reducing retear rate(odds ratio=0.27,95%CI:0.15-0.48).No significant difference in American Shoulder and Elbow Surgeons score,visual analogue scale score,and University of California at Los Angles score was demonstrated between these two groups for MIRCTs.CONCLUSION In general,SCR with LHBT transposition was a reliable and economical technique for treating MIRCTs,both in terms of biomechanical and clinical outcomes,with comparable clinical outcomes,improved ROM,AHD,and reduced the retear rates compared to conventional SCR and other established techniques.More high-quality randomized controlled studies on the long-term outcomes of SCR with LHBT transposition are required to further assess.展开更多
Owing to the prevalence of rotator cuff(RC)injuries and suboptimal healing outcome,rapid and functional regeneration of the tendon-bone interface(TBI)after RC repair continues to be a major clinical challenge.Given th...Owing to the prevalence of rotator cuff(RC)injuries and suboptimal healing outcome,rapid and functional regeneration of the tendon-bone interface(TBI)after RC repair continues to be a major clinical challenge.Given the essential role of the RC in shoulder movement,the engineering of biomimetic multi-tissue constructs presents an opportunity for complex TBI reconstruction after RC repair.Here,we propose a gradient cell-laden multi-tissue construct combined with compositional gradient TBI-specific bioinks via 3D cell-printing technology.In vitro studies demonstrated the capability of a gradient scaffold system in zone-specific inducibility and multi-tissue formation mimicking TBI.The regenerative performance of the gradient scaffold on RC regeneration was determined using a rat RC repair model.In particular,we adopted nondestructive,consecutive,and tissue-targeted near-infrared fluorescence imaging to visualize the direct anatomical change and the intricate RC regeneration progression in real time in vivo.Furthermore,the 3D cell-printed implant promotes effective restoration of shoulder locomotion function and accelerates TBI healing in vivo.In summary,this study identifies the therapeutic contribution of cell-printed constructs towards functional RC regeneration,demonstrating the translational potential of biomimetic gradient constructs for the clinical repair of multi-tissue interfaces.展开更多
文摘BACKGROUND Chronic large to massive rotator cuff tears are difficult to treat and re-tears are common even after surgical repair.We propose using a synthetic polypropylene mesh to increase the tensile strength of rotator cuff repairs.We hypothesize that using a polypropylene mesh to bridge the repair of large rotator cuff tears will increase the ultimate failure load of the repair.AIM To investigate the mechanical properties of rotator cuff tears repaired with a polypropylene interposition graft in an ovine ex-vivo model.METHODS A 20 mm length of infraspinatus tendon was resected from fifteen fresh sheep shoulders to simulate a large tear.We used a polypropylene mesh as an interposition graft between the ends of the tendon for repair.In seven specimens,the mesh was secured to remnant tendon by continuous stitching while mattress stitches were used for eight specimens.Five specimens with an intact tendon were tested.The specimens underwent cyclic loading to determine the ultimate failure load and gap formation.RESULTS The mean gap formation after 3000 cycles was 1.67 mm in the continuous group,and 4.16 mm in the mattress group(P=0.001).The mean ultimate failure load was significantly higher at 549.2 N in the continuous group,426.4 N in the mattress group and 370 N in the intact group(P=0.003).CONCLUSION The use of a polypropylene mesh is biomechanically suitable as an interposition graft for large irreparable rotator cuff tears.
文摘Objective: To further understand what factors should be considered when deciding to do mini-open versus arthroscopic rotator cuff repair. Methods: A systematic literature search on the computer was done with the help of the PubMed database. Of the articles searched through, three have been chosen to specifically address topics of interest concerning the factors affecting arthroscopic vs mini-open RCR surgical approaches. Discussion: As we continue to progress down the line of factors impacting a clinician’s decision making, we begin to see how postoperative management is unchanged. Tear severity lacks sufficient evidence to base a decision on, but financial, educational, and logistical factors are proven to play a significant role in this decision. Conclusion: As of right now it seems that mini-open RCR is the most cost and time efficient method, especially amongst non-fellowship trained surgeons or ones with lower volume of shoulder scopes. However, further studies should be done to examine cost and efficiency in Sport Medicine fellowship trained orthopedic surgeons to validate these findings.
基金the National Key Research and Development Program of China(No.2020YFC1107501)the National Natural Science Foundation of China(No.51971222,51801220)+4 种基金the Natural Science Foundation of Liaoning Province of China(No.2020-MS-001)the Dong Guan Innovative Research Team Program(No.2020607134012)the Military Translational Medicine Fund of Chinese PLA General Hospital(ZH19008)Capital’s Funds for Health Improvement and Research(CFH 2022-2-5051)the Dong Guan Science and Technology Service Network Initiative(20201600200042)。
文摘Despite transosseous rotator cuff tear repair using sutures is widely accepted for tendon-bone fixation,the fibrocartilaginous enthesis regeneration is still hardly achieved with the traditional sutures.In the present work,degradable magnesium(Mg)alloy wire was applied to suture supraspinatus tendon in a rat acute rotator cuff tear model with Vicryl Plus 4±0 absorbable suture as control.The shoulder joint humerus-supraspinatus tendon complex specimens were retrieved at 4,8,and 12 weeks after operation.The Mg alloy suture groups showed better biomechanical properties in terms of ultimate load to failure.Gross observation showed that hyperplastic response of the scar tissue at the tendon-bone interface is progressively alleviated over time in the both Mg alloy suture and Vicryl suture groups.In the histological analysis,for Mg alloy suture groups,chondrocytes appear to proliferate at 4 weeks postoperatively,and the tendon-bone interface showed an orderly structural transition zone at 8 weeks postoperatively.The collagenous fiber tended to be aligned and the tendon-bone interlocking structures apparently formed,where transitional structure from unmineralized fibrocartilage to mineralized fibrocartilage was closer to the native fibrocartilaginous enthesis.In vivo degradation of the magnesium alloy wire was completed within 12 weeks.The results indicated that Mg alloy wire was promising as degradable suture with the potential to promotes fibrocartilaginous interface regeneration in rotator cuff repair.
文摘BACKGROUND Rotator cuff pathology is a very common source of shoulder pain.Similarly,osteoarthritis of the glenohumeral joint can cause shoulder pain and produce similar symptoms.Surgical management can be indicated for both pathologies,however,outcomes data is limited when examining rotator cuff repair(RCR) in the setting of glenohumeral arthritis(GHOA).Thus,this study sought to determine outcomes for patients who undergo RCR in the setting of GHOA.AIM To evaluate if a relationship exists between outcomes of RCR in the setting of GHOA.METHODS This was a retrospective analysis of patients who underwent arthroscopic rotator cuff repair with concurrent glenohumeral osteoarthritis between 2010-2017.Patients were stratified based on rotator cuff tear size and glenohumeral osteoarthritis severity.Cohorts were paired 1:1 with patients without glenohumeral osteoarthritis.Patients included had a minimum two year follow-up.Rate of conversion to total shoulder arthroplasty,complication rates following initial surgery,and patient-reported outcome measures were collected.RESULTS A total of 142 patients were included.The number of patients that required total shoulder arthroplasty within two years after index surgery was low.2/71(2.8%) patients with GHOA,and 1/71(1.4%) without GHOA.Following rotator cuff repair,both groups showed favorable patientreported outcomes.CONCLUSION Patients with glenohumeral osteoarthritis who underwent arthroscopic rotator cuff repair showed comparable outcomes to patients without glenohumeral osteoarthritis.
基金the National Natural Science Foundation of China,No.81972125 and No.82172510.
文摘BACKGROUND Superior capsular reconstruction(SCR)with long head of biceps tendon(LHBT)transposition was developed to massive and irreparable rotator cuff tears(MIRCTs);however,the outcomes of this technique remain unclear.AIM To perform a systematic review of biomechanical outcomes and a meta-analysis of clinical outcomes after LHBT transposition for MIRCTs.METHODS We performed a systematic electronic database search on PubMed,EMBASE,and Cochrane Library.Studies of SCR with LHBT transposition were included according to the inclusion and exclusion criteria.Biomechanical studies were assessed for main results and conclusions.Included clinical studies were evaluated for quality of methodology.Data including study characteristics,cohort demographics,and outcomes were extracted.A meta-analysis was conducted of the clinical outcomes.RESULTS According to our inclusion and exclusion criteria,a total of six biomechanical studies were identified and reported an overall improvement in subacromial contact pressures and prevention of superior humeral migration without limiting range of motion(ROM)after LHBT transposition for MIRCTs.A total of five clinical studies were included in the meta-analysis of LHBT transposition outcomes,consisting of 253 patients.The results indicated that compared to other surgical methods for MIRCTs,LHBT transposition had advantages of more significant improvement in ROM(forward flexion mean difference[MD]=6.54,95%confidence interval[CI]:3.07-10.01;external rotation[MD=5.15,95%CI:1.59-8.17];the acromiohumeral distance[AHD][MD=0.90,95%CI:0.21-1.59])and reducing retear rate(odds ratio=0.27,95%CI:0.15-0.48).No significant difference in American Shoulder and Elbow Surgeons score,visual analogue scale score,and University of California at Los Angles score was demonstrated between these two groups for MIRCTs.CONCLUSION In general,SCR with LHBT transposition was a reliable and economical technique for treating MIRCTs,both in terms of biomechanical and clinical outcomes,with comparable clinical outcomes,improved ROM,AHD,and reduced the retear rates compared to conventional SCR and other established techniques.More high-quality randomized controlled studies on the long-term outcomes of SCR with LHBT transposition are required to further assess.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIP)(NRF-2020M3H4A1A02084827)(D.-W.C)and the U.S.NIH/NIBIB grants#R01EB022230(H.S.C.).
文摘Owing to the prevalence of rotator cuff(RC)injuries and suboptimal healing outcome,rapid and functional regeneration of the tendon-bone interface(TBI)after RC repair continues to be a major clinical challenge.Given the essential role of the RC in shoulder movement,the engineering of biomimetic multi-tissue constructs presents an opportunity for complex TBI reconstruction after RC repair.Here,we propose a gradient cell-laden multi-tissue construct combined with compositional gradient TBI-specific bioinks via 3D cell-printing technology.In vitro studies demonstrated the capability of a gradient scaffold system in zone-specific inducibility and multi-tissue formation mimicking TBI.The regenerative performance of the gradient scaffold on RC regeneration was determined using a rat RC repair model.In particular,we adopted nondestructive,consecutive,and tissue-targeted near-infrared fluorescence imaging to visualize the direct anatomical change and the intricate RC regeneration progression in real time in vivo.Furthermore,the 3D cell-printed implant promotes effective restoration of shoulder locomotion function and accelerates TBI healing in vivo.In summary,this study identifies the therapeutic contribution of cell-printed constructs towards functional RC regeneration,demonstrating the translational potential of biomimetic gradient constructs for the clinical repair of multi-tissue interfaces.
