It has been found that the large velocity pulse is one of the most important characteristics of near-fault strong ground motions. Some statistical relationships between pulse period and the moment magnitude for near-f...It has been found that the large velocity pulse is one of the most important characteristics of near-fault strong ground motions. Some statistical relationships between pulse period and the moment magnitude for near-fault strong ground motions have been established by Somerville （1998）; Alavi and Krawinkler （2000）; and Mavroeidis and Papageorgiou （2003）, where no variety of rupture velocity, fault depth, and fault distance, etc. were considered. Since near-fault ground motions are significantly influenced by the rupture process and source parameters, the effects of some source parameters on the amplitude and the period ofa forward-directivity velocity pulse in a half space are analyzed by the finite difference method combined with the kinematic source model in this paper. The study shows that the rupture velocity, fault depth, position of the initial rupture point and distribution of asperities are the most important parameters to the velocity pulse. Generally, the pulse period decreases and the pulse amplitude increases as the rupture velocity increases for shallow crustal earthquakes. In a definite region besides the fault trace, the pulse period increases as the fault depth increases. For a uniform strike slip fault, rupture initiating from one end of a fault and propagating to the other always generates a higher pulse amplitude and longer pulse period than in other cases.展开更多
The effect of seismic super-shear rupture on the directivity of ground motions using simulated accelerations of a vertical strike-slip fault model is the topic of this study. The discrete wave number/finite element me...The effect of seismic super-shear rupture on the directivity of ground motions using simulated accelerations of a vertical strike-slip fault model is the topic of this study. The discrete wave number/finite element method was adopted to calculate the ground motion in the horizontal layered half space. An analysis of peak ground acceleration （PGA） indicates that similar to the sub-shear situation, directivity also exists in the super-shear situation. However, there are some differences as tbllows： （1） The PGA of the fault-normal component decreases with super-shear velocity, and the areas that were significantly affected by directivity in the PGA field changed from a cone-shaped region in the forward direction in a sub-shear situation to a limited near-fault region in a super-shear situation. （2） The PGA of the fault-parallel and vertical component is not as sensitive as the fault-normal component to the increasing super-shear velocity. （3） The PGA of the fault-normal component is not always greater than the fault-parallel component when the rupture velocity exceeds the shear wave velocity.展开更多
In this paper a group of long period seismic waves in Shanghai area induced by Taiwan large earthquake is presented by using the method of semi empirical Green function, the period is up to 20 s. Such seismic waves c...In this paper a group of long period seismic waves in Shanghai area induced by Taiwan large earthquake is presented by using the method of semi empirical Green function, the period is up to 20 s. Such seismic waves can be used as a reference curve to test the strength of long period structures and their aseismic design. The long period part of seismic influence curve presented in 'Architecture Aseismic Design Code'(GBJ11 89) is less than 3 s, and uncertainties exist in the effects of earthquake safety evaluation. This research will be able to eliminate these shortages.展开更多
Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to id...Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.展开更多
The point source parameters of the April 12, 2012 Mw 7.0 Santa Isabel, Mexico, earthquake indicated by teleseismic P and SH waveforms obtained by a means of traditional cut and paste（CAP） method show that the best d...The point source parameters of the April 12, 2012 Mw 7.0 Santa Isabel, Mexico, earthquake indicated by teleseismic P and SH waveforms obtained by a means of traditional cut and paste（CAP） method show that the best double-couple solution of this event is： 37°/127°, 90°/81° and-9°/-180° for strike, dip and rake, respectively. Its centroid depth is 13 km. Global teleseismic waveform data exhibit that the rupture of the earthquake initiated at a focal depth of 13 km and propagated southeastward with a relatively slow rupture velocity（about 1.8 km/s on average）. The maximum slip occurred at 30 km southeast of the hypocenter, with the peak slip of 3.57 m and total seismic moment of whole fault up to 3.98×1019 N·m. These observations provide some insight into properties, co- or post-seismic deformation and coulomb stress changes of future earthquake in this area.展开更多
基金National Natural Science Foundation of ChinaUnder Grant No.50408003
文摘It has been found that the large velocity pulse is one of the most important characteristics of near-fault strong ground motions. Some statistical relationships between pulse period and the moment magnitude for near-fault strong ground motions have been established by Somerville （1998）; Alavi and Krawinkler （2000）; and Mavroeidis and Papageorgiou （2003）, where no variety of rupture velocity, fault depth, and fault distance, etc. were considered. Since near-fault ground motions are significantly influenced by the rupture process and source parameters, the effects of some source parameters on the amplitude and the period ofa forward-directivity velocity pulse in a half space are analyzed by the finite difference method combined with the kinematic source model in this paper. The study shows that the rupture velocity, fault depth, position of the initial rupture point and distribution of asperities are the most important parameters to the velocity pulse. Generally, the pulse period decreases and the pulse amplitude increases as the rupture velocity increases for shallow crustal earthquakes. In a definite region besides the fault trace, the pulse period increases as the fault depth increases. For a uniform strike slip fault, rupture initiating from one end of a fault and propagating to the other always generates a higher pulse amplitude and longer pulse period than in other cases.
基金Basic Science Research Foundation of IEM,CEA under Grant No.2011B02973 Program under Grant No.2011CB013601+1 种基金National Natural Science Foundation of China under Grant Nos.51238012,9121530113International Science&Technology Cooperation Program of China under Grant No.2012DFA70810
文摘The effect of seismic super-shear rupture on the directivity of ground motions using simulated accelerations of a vertical strike-slip fault model is the topic of this study. The discrete wave number/finite element method was adopted to calculate the ground motion in the horizontal layered half space. An analysis of peak ground acceleration （PGA） indicates that similar to the sub-shear situation, directivity also exists in the super-shear situation. However, there are some differences as tbllows： （1） The PGA of the fault-normal component decreases with super-shear velocity, and the areas that were significantly affected by directivity in the PGA field changed from a cone-shaped region in the forward direction in a sub-shear situation to a limited near-fault region in a super-shear situation. （2） The PGA of the fault-parallel and vertical component is not as sensitive as the fault-normal component to the increasing super-shear velocity. （3） The PGA of the fault-normal component is not always greater than the fault-parallel component when the rupture velocity exceeds the shear wave velocity.
文摘In this paper a group of long period seismic waves in Shanghai area induced by Taiwan large earthquake is presented by using the method of semi empirical Green function, the period is up to 20 s. Such seismic waves can be used as a reference curve to test the strength of long period structures and their aseismic design. The long period part of seismic influence curve presented in 'Architecture Aseismic Design Code'(GBJ11 89) is less than 3 s, and uncertainties exist in the effects of earthquake safety evaluation. This research will be able to eliminate these shortages.
文摘Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.
基金supported by the National Natural Science Foundation of China (Nos. 41422401, 41174086, 41104027)the Excellent Young Scientist Grant of National Science Foundation of Hubei Province (No. 2012FFA026)
文摘The point source parameters of the April 12, 2012 Mw 7.0 Santa Isabel, Mexico, earthquake indicated by teleseismic P and SH waveforms obtained by a means of traditional cut and paste（CAP） method show that the best double-couple solution of this event is： 37°/127°, 90°/81° and-9°/-180° for strike, dip and rake, respectively. Its centroid depth is 13 km. Global teleseismic waveform data exhibit that the rupture of the earthquake initiated at a focal depth of 13 km and propagated southeastward with a relatively slow rupture velocity（about 1.8 km/s on average）. The maximum slip occurred at 30 km southeast of the hypocenter, with the peak slip of 3.57 m and total seismic moment of whole fault up to 3.98×1019 N·m. These observations provide some insight into properties, co- or post-seismic deformation and coulomb stress changes of future earthquake in this area.
