Beta Ti−35Nb sandwich-structured composites with various reinforcing layers were designed and produced using additive manufacturing(AM)to achieve a balance between light weight and high strength.The impact of reinforc...Beta Ti−35Nb sandwich-structured composites with various reinforcing layers were designed and produced using additive manufacturing(AM)to achieve a balance between light weight and high strength.The impact of reinforcing layers on the compressive deformation behavior of porous composites was investigated through micro-computed tomography(Micro-CT)and finite element method(FEM)analyses.The results indicate that the addition of reinforcement layers to sandwich structures can significantly enhance the compressive yield strength and energy absorption capacity of porous metal structures;Micro-CT in-situ observation shows that the strain of the porous structure without the reinforcing layer is concentrated in the middle region,while the strain of the porous structure with the reinforcing layer is uniformly distributed;FEM analysis reveals that the reinforcing layers can alter stress distribution and reduce stress concentration,thereby promoting uniform deformation of the porous structure.The addition of reinforcing layer increases the compressive yield strength of sandwich-structured composite materials by 124%under the condition of limited reduction of porosity,and the yield strength increases from 4.6 to 10.3 MPa.展开更多
Current electro spun membranes used for pulp capping still lack the sustained-release capability and long-term anti-inflammatory effects that are favorable for dental pulp regeneration.In this work,a single-layered po...Current electro spun membranes used for pulp capping still lack the sustained-release capability and long-term anti-inflammatory effects that are favorable for dental pulp regeneration.In this work,a single-layered poly(lac tic acid)(PLA)electro spun membrane loaded with amorphous calcium phosphate(ACP)and aspirin(PLA/ACP/Aspirin membrane,i.e.,PA A membrane)is sandwiched between two poly(lactic-co-glycolic acid)(PLGA)electro spun membranes as a novel sandwich-structured PLGA and PA A composite electro spun membrane(PLGA-PAA membrane)to resolve the need for sustained-release design and anti-inflammatory effects.Contact angle measurements indicate that the PLGA-PAA membrane is more hydrophilic than the PAA membrane.An in vitro release study reveals that PLGA membranes coated on PAA membrane could slightly slow down ion release,while signiificantly prolonging aspirin release.We also co-cultured membranes with dental pulp stem cells(DPSCs)and human monocytic THP-1 cells to evaluate their osteogenic ability and anti-inflammatory effects,respectively.Compared with the PAA membrane,the PLGA-PAA membrane promotes cell adhesion,proliferation,and osteogenic differentiation.A prolonged anti-inflammatory effect of up to 18 days is also observed in the PLGA-PAA group.The results suggest a promising strategy for fabricating an electro spun membrane system with controlled release capabilities and long-term anti-inflammatory effects for use as pulp-capping material for regeneration of the dentin-pulp complex.展开更多
The deep burn skin injures usually severely damage the dermis with the loss of hair follicle loss,which are difficult to regenerate.Furthermore,severe burns often accompanied with large amount of wound exudates making...The deep burn skin injures usually severely damage the dermis with the loss of hair follicle loss,which are difficult to regenerate.Furthermore,severe burns often accompanied with large amount of wound exudates making the wound moist,easily infected,and difficult to heal.Therefore,it is of great clinical significance to develop wound dressings to remove wound exudates and promote hair follicle regeneration.In this study,a sandwich-structured wound dressing(SWD)with Janus membrane property was fabricated by hot compression molding using hydrophilic zinc silicate bioceramics(Hardystonite,ZnCS)and hydrophobic polylactic acid(PLA).This unique organic/inorganic Janus membrane structure revealed excellent exudate absorption property and effectively created a dry wound environment.Meanwhile,the incorporation of ZnCS bioceramic particles endowed the dressing with the bioactivity to promote hair follicle regeneration and wound healing through the release of Zn^(2+)and SiO^(2-)_(3)ions,and this bioactivity of the wound dressing is mainly attributed to the synergistic effect of Zn^(2+)and SiO^(2-)_(3)to promote the recruitment,viability,and differentiation of hair follicle cells.Our study demonstrates that the utilization of the Janus membrane and synergistic effect of different type bioactive ions are effective approaches for the design of wound dressings for burn wound healing.展开更多
The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverabl...The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverable losses of platinum products and alloys when operating under high temperature conditions, particularly for glassblowing and single crystal growing crucibles. A two-layered composite material based on platinum-group metals and corundum plasma ceramics is thoroughly investigated. A successful experience of crucibles exploitation, designed for production of high temperature optical glasses from the composite and results of the research on composite material specimens are described.展开更多
In this paper, we investigate the properties of an alternative material for use in marine engineering, namely a rigid and light sandwich-structured composite made of expanded polystyrene and fiberglass. Not only does ...In this paper, we investigate the properties of an alternative material for use in marine engineering, namely a rigid and light sandwich-structured composite made of expanded polystyrene and fiberglass. Not only does this material have an improved section modulus, but it is also inexpensive, light, easy to manipulate, and commercially available in various sizes. Using a computer program based on the finite element method, we calculated the hogging and sagging stresses and strains acting on a prismatic boat model composed of this material, and determined the minimum sizes and maximum permissible stresses to avoid deformation. Finally, we calculated the structural weight of the resulting vessel for comparison with another structure of comparable dimensions constructed from the commonly used core material Divinycell.展开更多
A novel surface modification method was proposed to improve the tribological property of Si. Multilayers were grown on Si（100） substrate by self-assembling monolayer （SAMs） method and filtered catholic vacuum arc ...A novel surface modification method was proposed to improve the tribological property of Si. Multilayers were grown on Si（100） substrate by self-assembling monolayer （SAMs） method and filtered catholic vacuum arc （FCVA） technique. The film composition and structure were characterized by using x-ray photoelectron spectroscope （XPS） and Raman spectroscopy （Raman）. Surface morphology and the roughness were also analyzed by an atomic force microscope （AFM） and a scanning electron microscopy （SEM）. The frictional behaviors of the films were evaluated by a UMT tester. Results showed that elastomeric nanocomposite monolayer prepared by SAM was uniformly distributed and isotropy, and the diamond-like carbon （DLC） film was successfully deposited by the FCVA technique. The friction coefficients of the prepared samples were in the range of 0.108-0.188. Furthermore, the friction coefficient slightly increased but the surface quality of the wear trace was improved after adding the copolymer elastomeric macromolecules SEBS on aminopropyl-triethoxysilane （APS） layer due to the inherent long chain of SEBS which abated the immediate impulsion at the interface and changed the kinetic energy into elastic potential energy, and stored it in SEBS.展开更多
Tensile and fracture behaviors of sandwich-structured composites consisting of a Fe-based amorphous layer with a constant thickness and ultrafine-grained Ni layers with different thicknesses were investigated. The res...Tensile and fracture behaviors of sandwich-structured composites consisting of a Fe-based amorphous layer with a constant thickness and ultrafine-grained Ni layers with different thicknesses were investigated. The results indicate that the initiation and the stable propagation of the shear band in the amorphous layer was dominated by the Ni layers due to their strong constraint role. The catastrophic fracture of the amorphous layer was postponed in the sandwich composites through properly increasing the constrained Ni layer thickness, which effectively decreased the shear stress on the shear fracture planes of the amorphous layer, and thus led to stable propagation of the primary SB characterized by the increase in the smooth region size of the shear band.展开更多
基金the Hunan Young Scientific Innovative Talents Program,China(No.2020RC3040)Outstanding Youth Fund of Hunan Natural Science Foundation,China(Nos.2021JJ20011,2021JJ40600,2021JJ40590)the National Natural Science Foundation of China(Nos.52001030,52204371)..
文摘Beta Ti−35Nb sandwich-structured composites with various reinforcing layers were designed and produced using additive manufacturing(AM)to achieve a balance between light weight and high strength.The impact of reinforcing layers on the compressive deformation behavior of porous composites was investigated through micro-computed tomography(Micro-CT)and finite element method(FEM)analyses.The results indicate that the addition of reinforcement layers to sandwich structures can significantly enhance the compressive yield strength and energy absorption capacity of porous metal structures;Micro-CT in-situ observation shows that the strain of the porous structure without the reinforcing layer is concentrated in the middle region,while the strain of the porous structure with the reinforcing layer is uniformly distributed;FEM analysis reveals that the reinforcing layers can alter stress distribution and reduce stress concentration,thereby promoting uniform deformation of the porous structure.The addition of reinforcing layer increases the compressive yield strength of sandwich-structured composite materials by 124%under the condition of limited reduction of porosity,and the yield strength increases from 4.6 to 10.3 MPa.
基金financial support from the National Natural Science Foundation of China(Nos.11872097,82074463,11827803,and U20A20390)the National Key R&D Program of China(No.2020YFC0122204)+1 种基金the 111 Project(No.B13003)the International Joint Research Center of Aerospace Biotechnology and Medical Engineering,Ministry of Science and Technology of China。
文摘Current electro spun membranes used for pulp capping still lack the sustained-release capability and long-term anti-inflammatory effects that are favorable for dental pulp regeneration.In this work,a single-layered poly(lac tic acid)(PLA)electro spun membrane loaded with amorphous calcium phosphate(ACP)and aspirin(PLA/ACP/Aspirin membrane,i.e.,PA A membrane)is sandwiched between two poly(lactic-co-glycolic acid)(PLGA)electro spun membranes as a novel sandwich-structured PLGA and PA A composite electro spun membrane(PLGA-PAA membrane)to resolve the need for sustained-release design and anti-inflammatory effects.Contact angle measurements indicate that the PLGA-PAA membrane is more hydrophilic than the PAA membrane.An in vitro release study reveals that PLGA membranes coated on PAA membrane could slightly slow down ion release,while signiificantly prolonging aspirin release.We also co-cultured membranes with dental pulp stem cells(DPSCs)and human monocytic THP-1 cells to evaluate their osteogenic ability and anti-inflammatory effects,respectively.Compared with the PAA membrane,the PLGA-PAA membrane promotes cell adhesion,proliferation,and osteogenic differentiation.A prolonged anti-inflammatory effect of up to 18 days is also observed in the PLGA-PAA group.The results suggest a promising strategy for fabricating an electro spun membrane system with controlled release capabilities and long-term anti-inflammatory effects for use as pulp-capping material for regeneration of the dentin-pulp complex.
基金This work was supported by the National Key Research and Development Program of China(No.2016YFC1100201)the National Natural Science Foundation of China(No.81772078)+1 种基金the National Natural Science Foundation of China(No.81671830)the Science and Technology Commission of Shanghai Municipality(No.19441902300).
文摘The deep burn skin injures usually severely damage the dermis with the loss of hair follicle loss,which are difficult to regenerate.Furthermore,severe burns often accompanied with large amount of wound exudates making the wound moist,easily infected,and difficult to heal.Therefore,it is of great clinical significance to develop wound dressings to remove wound exudates and promote hair follicle regeneration.In this study,a sandwich-structured wound dressing(SWD)with Janus membrane property was fabricated by hot compression molding using hydrophilic zinc silicate bioceramics(Hardystonite,ZnCS)and hydrophobic polylactic acid(PLA).This unique organic/inorganic Janus membrane structure revealed excellent exudate absorption property and effectively created a dry wound environment.Meanwhile,the incorporation of ZnCS bioceramic particles endowed the dressing with the bioactivity to promote hair follicle regeneration and wound healing through the release of Zn^(2+)and SiO^(2-)_(3)ions,and this bioactivity of the wound dressing is mainly attributed to the synergistic effect of Zn^(2+)and SiO^(2-)_(3)to promote the recruitment,viability,and differentiation of hair follicle cells.Our study demonstrates that the utilization of the Janus membrane and synergistic effect of different type bioactive ions are effective approaches for the design of wound dressings for burn wound healing.
文摘The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverable losses of platinum products and alloys when operating under high temperature conditions, particularly for glassblowing and single crystal growing crucibles. A two-layered composite material based on platinum-group metals and corundum plasma ceramics is thoroughly investigated. A successful experience of crucibles exploitation, designed for production of high temperature optical glasses from the composite and results of the research on composite material specimens are described.
文摘In this paper, we investigate the properties of an alternative material for use in marine engineering, namely a rigid and light sandwich-structured composite made of expanded polystyrene and fiberglass. Not only does this material have an improved section modulus, but it is also inexpensive, light, easy to manipulate, and commercially available in various sizes. Using a computer program based on the finite element method, we calculated the hogging and sagging stresses and strains acting on a prismatic boat model composed of this material, and determined the minimum sizes and maximum permissible stresses to avoid deformation. Finally, we calculated the structural weight of the resulting vessel for comparison with another structure of comparable dimensions constructed from the commonly used core material Divinycell.
基金Funded by the National Natural Science Foundation of China (Nos.50775101 and 51005103)Key Technology R&D Program of Jiangsu Province (No.BE2009123)+1 种基金Educational Commission of Jiangsu Province (No.09KJB460001)Doctoral Innovation Foundation of Jiangsu University (No.CX07B-03X)
文摘A novel surface modification method was proposed to improve the tribological property of Si. Multilayers were grown on Si（100） substrate by self-assembling monolayer （SAMs） method and filtered catholic vacuum arc （FCVA） technique. The film composition and structure were characterized by using x-ray photoelectron spectroscope （XPS） and Raman spectroscopy （Raman）. Surface morphology and the roughness were also analyzed by an atomic force microscope （AFM） and a scanning electron microscopy （SEM）. The frictional behaviors of the films were evaluated by a UMT tester. Results showed that elastomeric nanocomposite monolayer prepared by SAM was uniformly distributed and isotropy, and the diamond-like carbon （DLC） film was successfully deposited by the FCVA technique. The friction coefficients of the prepared samples were in the range of 0.108-0.188. Furthermore, the friction coefficient slightly increased but the surface quality of the wear trace was improved after adding the copolymer elastomeric macromolecules SEBS on aminopropyl-triethoxysilane （APS） layer due to the inherent long chain of SEBS which abated the immediate impulsion at the interface and changed the kinetic energy into elastic potential energy, and stored it in SEBS.
基金supported by the National Natural Science Foundation of China(NSFC,Grant Nos.51571199 and 51671050)supported by NSFC(Grant No.51601198)
文摘Tensile and fracture behaviors of sandwich-structured composites consisting of a Fe-based amorphous layer with a constant thickness and ultrafine-grained Ni layers with different thicknesses were investigated. The results indicate that the initiation and the stable propagation of the shear band in the amorphous layer was dominated by the Ni layers due to their strong constraint role. The catastrophic fracture of the amorphous layer was postponed in the sandwich composites through properly increasing the constrained Ni layer thickness, which effectively decreased the shear stress on the shear fracture planes of the amorphous layer, and thus led to stable propagation of the primary SB characterized by the increase in the smooth region size of the shear band.
