(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,F...(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,Fe)Sb is below 7.6×10^(3)erg/cm^(3)when Fe concentration is lower than 30%,which is one order of magnitude lower than that of(Ga,Mn)As.To address this issue,we grew Ga_(1-x-y)Fe_(x)Ni_(y)Sb films with almost the same x(≈24%)and different y to characterize their magnetic and electrical transport properties.We found that the magnetic anisotropy of Ga_(0.76-y)Fe_(0.24)Ni_(y)Sb can be enhanced by increasing y,in which Ku is negligible at y=1.7%but increases to 3.8×10^(5)erg/cm^(3)at y=6.1%(T_(C)=354 K).In addition,the hole mobility(μ)of Ga_(1-x-y)Fe_(x)Ni_(y)Sb reaches 31.3 cm^(2)/(V∙s)at x=23.7%,y=1.7%(T_(C)=319 K),which is much higher than the mobility of Ga_(1-x)Fe_(x)Sb at x=25.2%(μ=6.2 cm^(2)/(V∙s)).Our results provide useful information for enhancing the magnetic anisotropy and hole mobility of(Ga,Fe)Sb by using Ni co-doping.展开更多
Applying pressure has been evidenced as an effective method to control the properties of semiconductors,owing to its capability to modify the band configuration around Fermi energy.Correspondingly,structural evolution...Applying pressure has been evidenced as an effective method to control the properties of semiconductors,owing to its capability to modify the band configuration around Fermi energy.Correspondingly,structural evolutions under external pres-sures are required to analyze the mechanisms.Herein high-pressure structure of a magnetic doped semiconductor Ba(Zn_(0.95)Mn_(0.05))_(2)As_(2)is studied with combination of in-situ synchrotron X-ray diffractions and diamond anvil cells.The materials become ferromagnetic with Curie temperature of 105 K after further 20%K doping.The title material undergoes an isostruc-tural phase transition at around 19 GPa.Below the transition pressure,it is remarkable to find lengthening of Zn/Mn-As bond within Zn/MnAs layers,since chemical bonds are generally shortened with applying pressures.Accompanied with the bond stretch,interlayer As-As distances become shorter and the As-As dimers form after the phase transition.With further compres-sion,Zn/Mn-As bond becomes shortened due to the recovery of isotropic compression on the Zn/MnAs layers.展开更多
This paper theoretically studies the axisymmetric frictionless indentation of a transversely isotropic piezoelectric semiconductor(PSC)half-space subject to a rigid flatended cylindrical indenter.The contact area and ...This paper theoretically studies the axisymmetric frictionless indentation of a transversely isotropic piezoelectric semiconductor(PSC)half-space subject to a rigid flatended cylindrical indenter.The contact area and other surface of the PSC half-space are assumed to be electrically insulating.By the Hankel integral transformation,the problem is reduced to the Fredholm integral equation of the second kind.This equation is solved numerically to obtain the indentation behaviors of the PSC half-space,mainly including the indentation force-depth relation and the electric potential-depth relation.The results show that the effect of the semiconductor property on the indentation responses is limited within a certain range of variation of the steady carrier concentration.The dependence of indentation behavior on material properties is also analyzed by two different kinds of PSCs.Finite element simulations are conducted to verify the results calculated by the integral equation technique,and good agreement is demonstrated.展开更多
Piezoelectric semiconductors(PSs)possess both semiconducting properties and piezoelectric coupling effects,making them optimal building blocks for semiconductor devices.PS fiber-like structures have wide applications ...Piezoelectric semiconductors(PSs)possess both semiconducting properties and piezoelectric coupling effects,making them optimal building blocks for semiconductor devices.PS fiber-like structures have wide applications in multi-functional semiconductor devices.In this paper,a one-dimensional(1D)theoretical model is established to describe the piezotronic responses of a PS fiber under gradient temperature changes.The theoretical model aims to explain the mechanism behind the resistance change caused by such gradient temperature changes.Numerical results demonstrate that a gradient temperature change significantly affects the physical fields within the PS fiber,and can induce changes in its surface resistance.It provides important theoretical guidance on the development of piezotronic devices that are sensitive to temperature effects.展开更多
Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement m...Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement mechanism of RMFs on semiconductor bridge(SCB)during the ignition process is crucial for the engineering and practical application of advanced initiator and pyrotechnics devices.In this study,a one-dimensional(1D)gas-solid two-phase flow ignition model was established to study the ignition process of ESCB to charge particles based on the reactivity of Al/MoO_(3) RMFs.In order to fully consider the coupled exothermic between the RMFs and the SCB plasma during the ignition process,the heat release of chemical reaction in RMFs was used as an internal heat source in this model.It is found that the exothermal reaction in RMFs improved the ignition performance of SCB.In the process of plasma rapid condensation with heat release,the product of RMFs enhanced the heat transfer process between the gas phase and the solid charge particle,which accelerated the expansion of hot plasma,and heated the solid charge particle as well as gas phase region with low temperature.In addition,it made up for pressure loss in the gas phase.During the plasma dissipation process,the exothermal chemical reaction in RMFs acted as the main heating source to heat the charge particle,making the surface temperature of the charge particle,gas pressure,and gas temperature rise continuously.This result may yield significant advantages in providing a universal ignition model for miniaturized ignition devices.展开更多
In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study determined if it is possible to use the X-ray system installed in each medical facility to calculate ...In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study determined if it is possible to use the X-ray system installed in each medical facility to calculate the time constant of a semiconductor survey meter and confirm the meter’s function. An additional filter was attached to the medical X-ray system to satisfy the standards of N-60 to N-120, more copper plates were added as needed, and the first and second half-value layers were calculated to enable comparisons of the facility’s X-ray system quality with the N-60 to N-120 quality values. Next, we used a medical X-ray system to measure the leakage dose and calculate the time constant of the survey meter. The functionality of the meter was then checked and compared with the energy characteristics of the meter. The experimental results showed that it was possible to use a medical X-ray system to reproduce the N-60 to N-120 radiation quality values and to calculate the time constant from the measured results, assuming actual leakage dosimetry for that radiation quality. We also found that the calibration factor was equivalent to that of the energy characteristics of the survey meter.展开更多
As Moore’s law deteriorates,the research and development of new materials system are crucial for transitioning into the post Moore era.Traditional semiconductor materials,such as silicon,have served as the cornerston...As Moore’s law deteriorates,the research and development of new materials system are crucial for transitioning into the post Moore era.Traditional semiconductor materials,such as silicon,have served as the cornerstone of modern technologies for over half a century.This has been due to extensive research and engineering on new techniques to continuously enrich silicon-based materials system and,subsequently,to develop better performed silicon-based devices.Meanwhile,in the emerging post Moore era,layered semiconductor materials,such as transition metal dichalcogenides(TMDs),have garnered considerable research interest due to their unique electronic and optoelectronic properties,which hold great promise for powering the new era of next generation electronics.As a result,techniques for engineering the properties of layered semiconductors have expanded the possibilities of layered semiconductor-based devices.However,there remain significant limitations in the synthesis and engineering of layered semiconductors,impeding the utilization of layered semiconductor-based devices for mass applications.As a practical alternative,heterogeneous integration between layered and traditional semiconductors provides valuable opportunities to combine the distinctive properties of layered semiconductors with well-developed traditional semiconductors materials system.Here,we provide an overview of the comparative coherence between layered and traditional semiconductors,starting with TMDs as the representation of layered semiconductors.We highlight the meaningful opportunities presented by the heterogeneous integration of layered semiconductors with traditional semiconductors,representing an optimal strategy poised to propel the emerging semiconductor research community and chip industry towards unprecedented advancements in the coming decades.展开更多
We report the synthesis and characterization of a Si-based ternary semiconductor Mg_(3)Si_(2)Te_(6),which exhibits a quasitwo-dimensional structure,where the trigonal Mg_(3)Si_(2)Te_(6)layers are separated by Mg ions....We report the synthesis and characterization of a Si-based ternary semiconductor Mg_(3)Si_(2)Te_(6),which exhibits a quasitwo-dimensional structure,where the trigonal Mg_(3)Si_(2)Te_(6)layers are separated by Mg ions.Ultraviolet-visible absorption spectroscopy and density functional theory calculations were performed to investigate the electronic structure.The experimentally determined direct band gap is 1.39 eV,consistent with the value of the density function theory calculations.Our results reveal that Mg_(3)Si_(2)Te_(6)is a direct gap semiconductor,which is a potential candidate for near-infrared optoelectronic devices.展开更多
In these days,the increasing massive data are being produced and demanded to be processed with the rapid growth of information technology.It is difficult to rely solely on the shrinking of semiconductor devices and sc...In these days,the increasing massive data are being produced and demanded to be processed with the rapid growth of information technology.It is difficult to rely solely on the shrinking of semiconductor devices and scale-up of the integrated circuits(ICs)again in the foreseeable future.Exploring new materials,new-principle semiconductor devices and new computing architectures is becoming an urgent topic in this field.Ambipolar two-dimensional(2D)semiconductors,possessing excellent electrostatic field controllability and flexibly modulated major charge carriers,offer a possibility to construct reconfigurable devices and enable the ICs with new functions,showing great potential in computing capacity,energy efficiency,time delay and cost.This review focuses on the recent significant advancements in reconfigurable electronic and optoelectronic devices of ambipolar 2D semiconductors,and demonstrates their potential approach towards ICs,like reconfigurable circuits and neuromorphic chips.It is expected to help readers understand the device design principle of ambipolar 2D semiconductors,and push forward exploring more new-principle devices and new-architecture computing circuits,and even their product applications.展开更多
Harvesting solar energy to drive the semiconductor photocatalysis offers a promising tactic to address ever-growing challenges of both energy shortage and environmental pollution.Design and synthesis of nano-heterostr...Harvesting solar energy to drive the semiconductor photocatalysis offers a promising tactic to address ever-growing challenges of both energy shortage and environmental pollution.Design and synthesis of nano-heterostructure photocatalysts with controllable components and morphologies are the key factors for achieving highly efficient photocatalytic processes.Onedimensional(1D)semiconductor nanofibers produced by electrospinning possess a large ratio of length to diameter,high ratio of surface to volume,small grain sizes,and high porosity,which are ideally suited for photocatalytic reactions from the viewpoint of structure advantage.After the secondary treatment of these nanofibers through the solvothermal,gas reduction,in situ doping,or assembly methods,the multi-component nanofibers with hierarchical nano-heterostructures can be obtained to further enhance their light absorption and charge carrier separation during the photocatalytic processes.In recent years,the electrospun semiconductorbased nano-heterostructures have become a“hot topic”in the fields of photocatalytic energy conversion and environmental remediation.This review article summarizes the recent progress in electrospinning synthesis of various kinds of high-performance semiconductor-based nano-heterostructure photocatalysts for H2 production,CO_(2) reduction,and decomposition of pollutants.The future perspectives of these materials are also discussed.展开更多
With the emergence of new materials for high-efficiency organic solar cells(OSCs),understanding and finetuning the interface energetics become increasingly important.Precise determination of the so-called pinning ener...With the emergence of new materials for high-efficiency organic solar cells(OSCs),understanding and finetuning the interface energetics become increasingly important.Precise determination of the so-called pinning energies,one of the critical characteristics of the material to predict the energy level alignment(ELA)at either electrode/organic or organic/organic interfaces,are urgently needed for the new materials.Here,pinning energies of a wide variety of newly developed donors and nonfullerene acceptors(NFAs)are measured through ultraviolet photoelectron spectroscopy.The positive pinning energies of the studied donors and the negative pinning energies of NFAs are in the same energy range of 4.3−4.6 eV,which follows the design rules developed for fullerene-based OSCs.The ELA for metal/organic and inorganic/organic interfaces follows the predicted behavior for all of the materials studied.For organic-organic heterojunctions where both the donor and the NFA feature strong intramolecular charge transfer,the pinning energies often underestimate the experimentally obtained interface vacuum level shift,which has consequences for OSC device performance.展开更多
Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechan...Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechanical systems.The multi-field coupling and free vibration of a sandwiched FGPS plate are studied,and the governing equation and natural frequency are derived with the consideration of electron movement.The material properties in the functionally-graded layers are assumed to vary smoothly,and the first-order shear deformation theory is introduced to derive the multi-field coupling in the plate.The total strain energy of the plate is obtained,and the governing equations are presented by using Hamilton’s principle.By introducing the boundary conditions,the coupling physical fields are solved.In numerical examples,the natural frequencies of sandwiched FGPS plates under different geometrical and physical parameters are discussed.It is found that the initial electron density can be used to modulate the natural frequencies and vibrational displacement of sandwiched FGPS plates in the case of nano-size.The effects of the material properties of FGPS layers on the natural frequencies are also examined in detail.展开更多
Since the first report of amorphous In–Ga–Zn–O based thin film transistors,interest in oxide semiconductors has grown.They offer high mobility,low off-current,low process temperature,and wide flexibility for compos...Since the first report of amorphous In–Ga–Zn–O based thin film transistors,interest in oxide semiconductors has grown.They offer high mobility,low off-current,low process temperature,and wide flexibility for compositions and processes.Unfortunately,depositing oxide semiconductors using conventional processes like physical vapor deposition leads to problematic issues,especially for high-resolution displays and highly integrated memory devices.Conventional approaches have limited process flexibility and poor conformality on structured surfaces.Atomic layer deposition(ALD)is an advanced technique which can provide conformal,thickness-controlled,and high-quality thin film deposition.Accordingly,studies on ALD based oxide semiconductors have dramatically increased recently.Even so,the relationships between the film properties of ALD-oxide semiconductors and the main variables associated with deposition are still poorly understood,as are many issues related to applications.In this review,to introduce ALD-oxide semiconductors,we provide:(a)a brief summary of the history and importance of ALD-based oxide semiconductors in industry,(b)a discussion of the benefits of ALD for oxide semiconductor deposition(in-situ composition control in vertical distribution/vertical structure engineering/chemical reaction and film properties/insulator and interface engineering),and(c)an explanation of the challenging issues of scaling oxide semiconductors and ALD for industrial applications.This review provides valuable perspectives for researchers who have interest in semiconductor materials and electronic device applications,and the reasons ALD is important to applications of oxide semiconductors.展开更多
Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocata...Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocatalytic CO_(2)reduction reaction(PCO_(2)RR)relies on the semiconductor photocatalysts that suffer from high recombination rate of the photo-generated carriers,low light harvesting capability,and low stability.This review explores the recent discoveries on the novel semiconductors for PCO_(2)RR,focusing on the rational catalyst design strategies(such as surface engineering,band engineering,hierarchical structure construction,single-atom catalysts,and biohybrid catalysts)that promote the catalytic performance of semiconductor catalysts on PCO_(2)RR.The advanced characterization techniques that contribute to understanding the intrinsic properties of the photocatalysts are also discussed.Lastly,the perspectives on future challenges and possible solutions for PCO_(2)RR are presented.展开更多
Two-dimensional(2D)materials are regarded as promising candidates in many applications,including electronics and optoelectronics,because of their superior properties,including atomic-level thickness,tunable bandgaps,l...Two-dimensional(2D)materials are regarded as promising candidates in many applications,including electronics and optoelectronics,because of their superior properties,including atomic-level thickness,tunable bandgaps,large specific surface area,and high carrier mobility.In order to bring 2D materials from the laboratory to industrialized applications,materials preparation is the first prerequisite.Compared to the n-type analogs,the family of p-type 2D semiconductors is relatively small,which limits the broad integration of 2D semiconductors in practical applications such as complementary logic circuits.So far,many efforts have been made in the preparation of p-type 2D semiconductors.In this review,we overview recent progresses achieved in the preparation of p-type 2D semiconductors and highlight some promising methods to realize their controllable preparation by following both the top-down and bottom-up strategies.Then,we summarize some significant application of p-type 2D semiconductors in electronic and optoelectronic devices and their superiorities.In end,we conclude the challenges existed in this field and propose the potential opportunities in aspects from the discovery of novel p-type 2D semiconductors,their controlled mass preparation,compatible engineering with silicon production line,high-κdielectric materials,to integration and applications of p-type 2D semiconductors and their heterostructures in electronic and optoelectronic devices.Overall,we believe that this review will guide the design of preparation systems to fulfill the controllable growth of p-type 2D semiconductors with high quality and thus lay the foundations for their potential application in electronics and optoelectronics.展开更多
Two-dimensional(2D)van der Waals semiconductors are appealing for low-power transistors.Here,we show the feasibility in enhancing carrier mobility in 2D semiconductors through engineering the vertical distribution of ...Two-dimensional(2D)van der Waals semiconductors are appealing for low-power transistors.Here,we show the feasibility in enhancing carrier mobility in 2D semiconductors through engineering the vertical distribution of carriers confined inside ultrathin channels via symmetrizing gate configuration or increasing channel thickness.Through self-consistently solving the Schr¨odinger–Poisson equations,the shapes of electron envelope functions are extensively investigated by clarifying their relationship with gate configuration,channel thickness,dielectric permittivity,and electron density.The impacts of electron distribution variation on various carrier scattering matrix elements and overall carrier mobility are insightfully clarified.It is found that the carrier mobility can be generally enhanced in the dual-gated configuration due to the centralization of carrier redistribution in the nanometer-thick semiconductor channels and the rate of increase reaches up to 23%in Hf O2 dual-gated 10-layer MoS_(2) channels.This finding represents a viable strategy for performance optimization in transistors consisting of 2D semiconductors.展开更多
The rapid spread of viral zoonoses can cause severe consequences,including huge economic loss,public health problems or even global crisis of society.Clinical detection technology plays a very important role in the pr...The rapid spread of viral zoonoses can cause severe consequences,including huge economic loss,public health problems or even global crisis of society.Clinical detection technology plays a very important role in the prevention and control of such zoonoses.The rapid and accurate detection of the pathogens of the diseases can directly lead to the early report and early successful control of the diseases.With the advantages of being easy to use,fast,portable,multiplexing and cost-effective,semiconductor biosensors are kinds of detection devices that play an important role in preventing epidemics,and thus have become one of the research hotspots.Here,we summarized the advances of semiconductor biosensors in viral zoonoses detection.By discussing the major principles and applications of each method for different pathogens,this review proposed the directions of designing semiconductor biosensors for clinical application and put forward perspectives in diagnostic of viral zoonoses.展开更多
The recent successful fabrication of two-dimensional(2D)CoO with nanometer-thickness motivates us to investigate monolayer CoO due to possible magnetic properties induced by Co atoms.Here,we employ first-principles ca...The recent successful fabrication of two-dimensional(2D)CoO with nanometer-thickness motivates us to investigate monolayer CoO due to possible magnetic properties induced by Co atoms.Here,we employ first-principles calculations to show that monolayer CoO is a 2D spin-spiral semiconductor with a honeycomb lattice.The calculated phonon dispersion reveals the monolayer's dynamical stability.Monolayer CoO exhibits a type-I spin-spiral magnetic ground state.The spinspiral state and the direct bandgap character are both robust under biaxial compressive strain(-5%)to tensile strain(5%).The bandgap varies only slightly under either compressive or tensile strain up to 5%.These results suggest a potential for applications in spintronic devices and offer a new platform to explore magnetism in the 2D limit.展开更多
In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals f...In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals ferromagnetic semiconductors,including the monolayer CrI3 with Tc=45 K[1]and the bilayer Cr2Ge2Te6 with Tc=28 K[2]in experiments,has attracted extensive attention in the 2D ferromagnetic semiconductors.One of the key problems is to find suitable 2D magnetic semiconductors,which can have room-temperature operation as required in applications.展开更多
The hydrogen evolution reaction performance of semiconducting 2H-phase molybdenum disulfide(2H-MoS_(2))presents a significant hurdle in realizing its full potential applications.Here,we utilize theoretical calculation...The hydrogen evolution reaction performance of semiconducting 2H-phase molybdenum disulfide(2H-MoS_(2))presents a significant hurdle in realizing its full potential applications.Here,we utilize theoretical calculations to predict possible functionalized graphene quantum dots(GQDs),which can enhance HER activity of bulk MoS_(2).Subsequently,we design a functionalized GQD-induced in-situ bottom-up strategy to fabricate near atom-layer 2H-MoS_(2) nanosheets mediated with GQDs(ALQD)by modulating the concentration of electron withdrawing/donating functional groups.Experimental results reveal that the introduction of a series of functionalized GQDs during the synthesis of ALQD plays a crucial role.Notably,the higher the concentration and strength of electron-withdrawing functional groups on GQDs,the thinner and more active the resulting ALQD are.Remarkably,the synthesized near atom-layer ALQD-SO_(3)demonstrate significantly improved HER performance.Our GQD-induced strategy provides a simple and efficient approach for expanding the catalytic application of MoS_(2).Furthermore,it holds substantial potential for developing nanosheets in other transition-metal dichalcogenide materials.展开更多
基金This work is supported by the National Key R&D Program of China(No.2021YFA1202200)the CAS Project for Young Scientists in Basic Research(No.YSBR-030)+1 种基金the National Natural Science Foundation Program of China(No.12174383)H L Wang also acknowledges the support from the Youth Innovation Promotion Association,Chinese Academy of Sciences(No.2021110).
文摘(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,Fe)Sb is below 7.6×10^(3)erg/cm^(3)when Fe concentration is lower than 30%,which is one order of magnitude lower than that of(Ga,Mn)As.To address this issue,we grew Ga_(1-x-y)Fe_(x)Ni_(y)Sb films with almost the same x(≈24%)and different y to characterize their magnetic and electrical transport properties.We found that the magnetic anisotropy of Ga_(0.76-y)Fe_(0.24)Ni_(y)Sb can be enhanced by increasing y,in which Ku is negligible at y=1.7%but increases to 3.8×10^(5)erg/cm^(3)at y=6.1%(T_(C)=354 K).In addition,the hole mobility(μ)of Ga_(1-x-y)Fe_(x)Ni_(y)Sb reaches 31.3 cm^(2)/(V∙s)at x=23.7%,y=1.7%(T_(C)=319 K),which is much higher than the mobility of Ga_(1-x)Fe_(x)Sb at x=25.2%(μ=6.2 cm^(2)/(V∙s)).Our results provide useful information for enhancing the magnetic anisotropy and hole mobility of(Ga,Fe)Sb by using Ni co-doping.
基金supported by Beijing Natural Science Foundation (No. 2212049)NSF of China (No. 11974407)+1 种基金CAS Project for Young Scientists in Basic Research (No. YSBR-030)the Youth Innovation Promotion Association of CAS (No. 2020007)
文摘Applying pressure has been evidenced as an effective method to control the properties of semiconductors,owing to its capability to modify the band configuration around Fermi energy.Correspondingly,structural evolutions under external pres-sures are required to analyze the mechanisms.Herein high-pressure structure of a magnetic doped semiconductor Ba(Zn_(0.95)Mn_(0.05))_(2)As_(2)is studied with combination of in-situ synchrotron X-ray diffractions and diamond anvil cells.The materials become ferromagnetic with Curie temperature of 105 K after further 20%K doping.The title material undergoes an isostruc-tural phase transition at around 19 GPa.Below the transition pressure,it is remarkable to find lengthening of Zn/Mn-As bond within Zn/MnAs layers,since chemical bonds are generally shortened with applying pressures.Accompanied with the bond stretch,interlayer As-As distances become shorter and the As-As dimers form after the phase transition.With further compres-sion,Zn/Mn-As bond becomes shortened due to the recovery of isotropic compression on the Zn/MnAs layers.
基金Project supported by the National Natural Science Foundation of China(Nos.12072209,U21A2043012192211)+1 种基金the Natural Science Foundation of Hebei Province of China(No.A2020210009)the S&T Program of Hebei Province of China(No.225676162GH)。
文摘This paper theoretically studies the axisymmetric frictionless indentation of a transversely isotropic piezoelectric semiconductor(PSC)half-space subject to a rigid flatended cylindrical indenter.The contact area and other surface of the PSC half-space are assumed to be electrically insulating.By the Hankel integral transformation,the problem is reduced to the Fredholm integral equation of the second kind.This equation is solved numerically to obtain the indentation behaviors of the PSC half-space,mainly including the indentation force-depth relation and the electric potential-depth relation.The results show that the effect of the semiconductor property on the indentation responses is limited within a certain range of variation of the steady carrier concentration.The dependence of indentation behavior on material properties is also analyzed by two different kinds of PSCs.Finite element simulations are conducted to verify the results calculated by the integral equation technique,and good agreement is demonstrated.
基金Project supported by the National Natural Science Foundation of China (Nos.12172326 and 11972319)the National Key Research and Development Program of China (No.2020YFA0711700)the Natural Science Foundation of Zhejiang Province of China (No.LR21A020002)。
文摘Piezoelectric semiconductors(PSs)possess both semiconducting properties and piezoelectric coupling effects,making them optimal building blocks for semiconductor devices.PS fiber-like structures have wide applications in multi-functional semiconductor devices.In this paper,a one-dimensional(1D)theoretical model is established to describe the piezotronic responses of a PS fiber under gradient temperature changes.The theoretical model aims to explain the mechanism behind the resistance change caused by such gradient temperature changes.Numerical results demonstrate that a gradient temperature change significantly affects the physical fields within the PS fiber,and can induce changes in its surface resistance.It provides important theoretical guidance on the development of piezotronic devices that are sensitive to temperature effects.
基金supported by the National Natural Science Foundation of China(Grant Nos.22275092,52102107 and 52372084)the Fundamental Research Funds for the Central Universities(Grant No.30923010920)。
文摘Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement mechanism of RMFs on semiconductor bridge(SCB)during the ignition process is crucial for the engineering and practical application of advanced initiator and pyrotechnics devices.In this study,a one-dimensional(1D)gas-solid two-phase flow ignition model was established to study the ignition process of ESCB to charge particles based on the reactivity of Al/MoO_(3) RMFs.In order to fully consider the coupled exothermic between the RMFs and the SCB plasma during the ignition process,the heat release of chemical reaction in RMFs was used as an internal heat source in this model.It is found that the exothermal reaction in RMFs improved the ignition performance of SCB.In the process of plasma rapid condensation with heat release,the product of RMFs enhanced the heat transfer process between the gas phase and the solid charge particle,which accelerated the expansion of hot plasma,and heated the solid charge particle as well as gas phase region with low temperature.In addition,it made up for pressure loss in the gas phase.During the plasma dissipation process,the exothermal chemical reaction in RMFs acted as the main heating source to heat the charge particle,making the surface temperature of the charge particle,gas pressure,and gas temperature rise continuously.This result may yield significant advantages in providing a universal ignition model for miniaturized ignition devices.
文摘In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study determined if it is possible to use the X-ray system installed in each medical facility to calculate the time constant of a semiconductor survey meter and confirm the meter’s function. An additional filter was attached to the medical X-ray system to satisfy the standards of N-60 to N-120, more copper plates were added as needed, and the first and second half-value layers were calculated to enable comparisons of the facility’s X-ray system quality with the N-60 to N-120 quality values. Next, we used a medical X-ray system to measure the leakage dose and calculate the time constant of the survey meter. The functionality of the meter was then checked and compared with the energy characteristics of the meter. The experimental results showed that it was possible to use a medical X-ray system to reproduce the N-60 to N-120 radiation quality values and to calculate the time constant from the measured results, assuming actual leakage dosimetry for that radiation quality. We also found that the calibration factor was equivalent to that of the energy characteristics of the survey meter.
基金supported by National Key R&D Program of China(2020YFB2008704)the National Natural Science Foundation of China(62004114 and 62174098)+1 种基金Beijing Municipal Science and Technology Commission(Z221100005822011)The Tsinghua-Foshan Innovation Special Fund(2021THFS0215)。
文摘As Moore’s law deteriorates,the research and development of new materials system are crucial for transitioning into the post Moore era.Traditional semiconductor materials,such as silicon,have served as the cornerstone of modern technologies for over half a century.This has been due to extensive research and engineering on new techniques to continuously enrich silicon-based materials system and,subsequently,to develop better performed silicon-based devices.Meanwhile,in the emerging post Moore era,layered semiconductor materials,such as transition metal dichalcogenides(TMDs),have garnered considerable research interest due to their unique electronic and optoelectronic properties,which hold great promise for powering the new era of next generation electronics.As a result,techniques for engineering the properties of layered semiconductors have expanded the possibilities of layered semiconductor-based devices.However,there remain significant limitations in the synthesis and engineering of layered semiconductors,impeding the utilization of layered semiconductor-based devices for mass applications.As a practical alternative,heterogeneous integration between layered and traditional semiconductors provides valuable opportunities to combine the distinctive properties of layered semiconductors with well-developed traditional semiconductors materials system.Here,we provide an overview of the comparative coherence between layered and traditional semiconductors,starting with TMDs as the representation of layered semiconductors.We highlight the meaningful opportunities presented by the heterogeneous integration of layered semiconductors with traditional semiconductors,representing an optimal strategy poised to propel the emerging semiconductor research community and chip industry towards unprecedented advancements in the coming decades.
基金the National Natural Science Foundation of China(Grant Nos.12174454,11904414,11904416,and 12104427)the Guangdong Basic and Applied Basic Research Foundation,China(Grant No.2021B1515120015)+1 种基金the Guangzhou Basic and Applied Basic Research Foundation(Grant No.202201011123)the National Key Research and Development Program of China(Grant No.2019YFA0705702).
文摘We report the synthesis and characterization of a Si-based ternary semiconductor Mg_(3)Si_(2)Te_(6),which exhibits a quasitwo-dimensional structure,where the trigonal Mg_(3)Si_(2)Te_(6)layers are separated by Mg ions.Ultraviolet-visible absorption spectroscopy and density functional theory calculations were performed to investigate the electronic structure.The experimentally determined direct band gap is 1.39 eV,consistent with the value of the density function theory calculations.Our results reveal that Mg_(3)Si_(2)Te_(6)is a direct gap semiconductor,which is a potential candidate for near-infrared optoelectronic devices.
基金Project supported by the National Natural Science Foundation of China (Grant No.62274037)the National Key Research and Development Program of China (Grant No.2018YFA0703703)+1 种基金the Ministry of Science and Technology of China (Grant No.2018YFE0118300)the State Key Laboratory of ASIC&System (Grant No.2021MS003)。
文摘In these days,the increasing massive data are being produced and demanded to be processed with the rapid growth of information technology.It is difficult to rely solely on the shrinking of semiconductor devices and scale-up of the integrated circuits(ICs)again in the foreseeable future.Exploring new materials,new-principle semiconductor devices and new computing architectures is becoming an urgent topic in this field.Ambipolar two-dimensional(2D)semiconductors,possessing excellent electrostatic field controllability and flexibly modulated major charge carriers,offer a possibility to construct reconfigurable devices and enable the ICs with new functions,showing great potential in computing capacity,energy efficiency,time delay and cost.This review focuses on the recent significant advancements in reconfigurable electronic and optoelectronic devices of ambipolar 2D semiconductors,and demonstrates their potential approach towards ICs,like reconfigurable circuits and neuromorphic chips.It is expected to help readers understand the device design principle of ambipolar 2D semiconductors,and push forward exploring more new-principle devices and new-architecture computing circuits,and even their product applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.12074055 and 62005036)Liaoning BaiQianWan Talents Program,Dalian Science Foundation for Distinguished Young Scholars(2018RJ05)+1 种基金the Natural Science Foundation of Liaoning Province(Grant No.2020-MZLH-15)the Program for Dalian Excellent Talents(Grant No.2020RQ131).
文摘Harvesting solar energy to drive the semiconductor photocatalysis offers a promising tactic to address ever-growing challenges of both energy shortage and environmental pollution.Design and synthesis of nano-heterostructure photocatalysts with controllable components and morphologies are the key factors for achieving highly efficient photocatalytic processes.Onedimensional(1D)semiconductor nanofibers produced by electrospinning possess a large ratio of length to diameter,high ratio of surface to volume,small grain sizes,and high porosity,which are ideally suited for photocatalytic reactions from the viewpoint of structure advantage.After the secondary treatment of these nanofibers through the solvothermal,gas reduction,in situ doping,or assembly methods,the multi-component nanofibers with hierarchical nano-heterostructures can be obtained to further enhance their light absorption and charge carrier separation during the photocatalytic processes.In recent years,the electrospun semiconductorbased nano-heterostructures have become a“hot topic”in the fields of photocatalytic energy conversion and environmental remediation.This review article summarizes the recent progress in electrospinning synthesis of various kinds of high-performance semiconductor-based nano-heterostructure photocatalysts for H2 production,CO_(2) reduction,and decomposition of pollutants.The future perspectives of these materials are also discussed.
基金the financial support from the Swedish Research Council(project grants no.2016-05498,2016-05990,and 2020-04538)the Swedish Energy Agency(grant.no.45411-1)+1 种基金by the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University(Faculty Grant SFO Mat LiU no.200900971)support from the Wallenberg Wood Science Center(WWSC).
文摘With the emergence of new materials for high-efficiency organic solar cells(OSCs),understanding and finetuning the interface energetics become increasingly important.Precise determination of the so-called pinning energies,one of the critical characteristics of the material to predict the energy level alignment(ELA)at either electrode/organic or organic/organic interfaces,are urgently needed for the new materials.Here,pinning energies of a wide variety of newly developed donors and nonfullerene acceptors(NFAs)are measured through ultraviolet photoelectron spectroscopy.The positive pinning energies of the studied donors and the negative pinning energies of NFAs are in the same energy range of 4.3−4.6 eV,which follows the design rules developed for fullerene-based OSCs.The ELA for metal/organic and inorganic/organic interfaces follows the predicted behavior for all of the materials studied.For organic-organic heterojunctions where both the donor and the NFA feature strong intramolecular charge transfer,the pinning energies often underestimate the experimentally obtained interface vacuum level shift,which has consequences for OSC device performance.
基金supported by the National Natural Science Foundation of China(Nos.12172236 and 12202289)。
文摘Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechanical systems.The multi-field coupling and free vibration of a sandwiched FGPS plate are studied,and the governing equation and natural frequency are derived with the consideration of electron movement.The material properties in the functionally-graded layers are assumed to vary smoothly,and the first-order shear deformation theory is introduced to derive the multi-field coupling in the plate.The total strain energy of the plate is obtained,and the governing equations are presented by using Hamilton’s principle.By introducing the boundary conditions,the coupling physical fields are solved.In numerical examples,the natural frequencies of sandwiched FGPS plates under different geometrical and physical parameters are discussed.It is found that the initial electron density can be used to modulate the natural frequencies and vibrational displacement of sandwiched FGPS plates in the case of nano-size.The effects of the material properties of FGPS layers on the natural frequencies are also examined in detail.
基金supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT (NRF-2020M3H4A3081867)the industry technology R&D program (20006400) funded by the Ministry of Trade,Industry and Energy (MOTIE, Korea)+2 种基金the project number 20010402 funded by the Ministry of Trade,Industry and Energy (MOTIE, Korea)the Industry Technology R&D program (#20010371) funded by the Ministry of Trade,Industry and Energy (MOTIE, Republic of Korea)the Technology Innovation Program (20017382) funded By the Ministryof Trade,Industry and Energy (MOTIE, Korea)
文摘Since the first report of amorphous In–Ga–Zn–O based thin film transistors,interest in oxide semiconductors has grown.They offer high mobility,low off-current,low process temperature,and wide flexibility for compositions and processes.Unfortunately,depositing oxide semiconductors using conventional processes like physical vapor deposition leads to problematic issues,especially for high-resolution displays and highly integrated memory devices.Conventional approaches have limited process flexibility and poor conformality on structured surfaces.Atomic layer deposition(ALD)is an advanced technique which can provide conformal,thickness-controlled,and high-quality thin film deposition.Accordingly,studies on ALD based oxide semiconductors have dramatically increased recently.Even so,the relationships between the film properties of ALD-oxide semiconductors and the main variables associated with deposition are still poorly understood,as are many issues related to applications.In this review,to introduce ALD-oxide semiconductors,we provide:(a)a brief summary of the history and importance of ALD-based oxide semiconductors in industry,(b)a discussion of the benefits of ALD for oxide semiconductor deposition(in-situ composition control in vertical distribution/vertical structure engineering/chemical reaction and film properties/insulator and interface engineering),and(c)an explanation of the challenging issues of scaling oxide semiconductors and ALD for industrial applications.This review provides valuable perspectives for researchers who have interest in semiconductor materials and electronic device applications,and the reasons ALD is important to applications of oxide semiconductors.
基金This work was supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)。
文摘Using clean solar energy to reduce CO_(2)into value-added products not only consumes the over-emitted CO_(2)that causes environmental problems,but also generates fuel chemicals to alleviate energy crises.The photocatalytic CO_(2)reduction reaction(PCO_(2)RR)relies on the semiconductor photocatalysts that suffer from high recombination rate of the photo-generated carriers,low light harvesting capability,and low stability.This review explores the recent discoveries on the novel semiconductors for PCO_(2)RR,focusing on the rational catalyst design strategies(such as surface engineering,band engineering,hierarchical structure construction,single-atom catalysts,and biohybrid catalysts)that promote the catalytic performance of semiconductor catalysts on PCO_(2)RR.The advanced characterization techniques that contribute to understanding the intrinsic properties of the photocatalysts are also discussed.Lastly,the perspectives on future challenges and possible solutions for PCO_(2)RR are presented.
基金support from the National Natural Science Foundation of China (Nos. 52202044 and 52302190)Suzhou Science and Technology Program for Industrial Prospect and Key technology (No. SYC2022018)
文摘Two-dimensional(2D)materials are regarded as promising candidates in many applications,including electronics and optoelectronics,because of their superior properties,including atomic-level thickness,tunable bandgaps,large specific surface area,and high carrier mobility.In order to bring 2D materials from the laboratory to industrialized applications,materials preparation is the first prerequisite.Compared to the n-type analogs,the family of p-type 2D semiconductors is relatively small,which limits the broad integration of 2D semiconductors in practical applications such as complementary logic circuits.So far,many efforts have been made in the preparation of p-type 2D semiconductors.In this review,we overview recent progresses achieved in the preparation of p-type 2D semiconductors and highlight some promising methods to realize their controllable preparation by following both the top-down and bottom-up strategies.Then,we summarize some significant application of p-type 2D semiconductors in electronic and optoelectronic devices and their superiorities.In end,we conclude the challenges existed in this field and propose the potential opportunities in aspects from the discovery of novel p-type 2D semiconductors,their controlled mass preparation,compatible engineering with silicon production line,high-κdielectric materials,to integration and applications of p-type 2D semiconductors and their heterostructures in electronic and optoelectronic devices.Overall,we believe that this review will guide the design of preparation systems to fulfill the controllable growth of p-type 2D semiconductors with high quality and thus lay the foundations for their potential application in electronics and optoelectronics.
基金the National Key R&D Program of China(Grant Nos.2022YFA1203802 and 2021YFA1202903)the National Natural Science Foundation of China(Grant Nos.92264202,61974060,and 61674080)the Innovation and Entrepreneurship Program of Jiangsu Province。
文摘Two-dimensional(2D)van der Waals semiconductors are appealing for low-power transistors.Here,we show the feasibility in enhancing carrier mobility in 2D semiconductors through engineering the vertical distribution of carriers confined inside ultrathin channels via symmetrizing gate configuration or increasing channel thickness.Through self-consistently solving the Schr¨odinger–Poisson equations,the shapes of electron envelope functions are extensively investigated by clarifying their relationship with gate configuration,channel thickness,dielectric permittivity,and electron density.The impacts of electron distribution variation on various carrier scattering matrix elements and overall carrier mobility are insightfully clarified.It is found that the carrier mobility can be generally enhanced in the dual-gated configuration due to the centralization of carrier redistribution in the nanometer-thick semiconductor channels and the rate of increase reaches up to 23%in Hf O2 dual-gated 10-layer MoS_(2) channels.This finding represents a viable strategy for performance optimization in transistors consisting of 2D semiconductors.
基金supported by the National Key Research and Development Program of China(2022YFC2602100)supported by National key research and development program(2021YFC2600602)。
文摘The rapid spread of viral zoonoses can cause severe consequences,including huge economic loss,public health problems or even global crisis of society.Clinical detection technology plays a very important role in the prevention and control of such zoonoses.The rapid and accurate detection of the pathogens of the diseases can directly lead to the early report and early successful control of the diseases.With the advantages of being easy to use,fast,portable,multiplexing and cost-effective,semiconductor biosensors are kinds of detection devices that play an important role in preventing epidemics,and thus have become one of the research hotspots.Here,we summarized the advances of semiconductor biosensors in viral zoonoses detection.By discussing the major principles and applications of each method for different pathogens,this review proposed the directions of designing semiconductor biosensors for clinical application and put forward perspectives in diagnostic of viral zoonoses.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.52102193,52250402,and 61888102)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB30000000)+1 种基金the Fundamental Research Funds for the Central Universitiessupported in part by the Mc Minn Endowment。
文摘The recent successful fabrication of two-dimensional(2D)CoO with nanometer-thickness motivates us to investigate monolayer CoO due to possible magnetic properties induced by Co atoms.Here,we employ first-principles calculations to show that monolayer CoO is a 2D spin-spiral semiconductor with a honeycomb lattice.The calculated phonon dispersion reveals the monolayer's dynamical stability.Monolayer CoO exhibits a type-I spin-spiral magnetic ground state.The spinspiral state and the direct bandgap character are both robust under biaxial compressive strain(-5%)to tensile strain(5%).The bandgap varies only slightly under either compressive or tensile strain up to 5%.These results suggest a potential for applications in spintronic devices and offer a new platform to explore magnetism in the 2D limit.
文摘In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals ferromagnetic semiconductors,including the monolayer CrI3 with Tc=45 K[1]and the bilayer Cr2Ge2Te6 with Tc=28 K[2]in experiments,has attracted extensive attention in the 2D ferromagnetic semiconductors.One of the key problems is to find suitable 2D magnetic semiconductors,which can have room-temperature operation as required in applications.
基金This research was supported by Shanghai Pujiang Program(21PJD022)National Natural Science Foundation of China(21901154).
文摘The hydrogen evolution reaction performance of semiconducting 2H-phase molybdenum disulfide(2H-MoS_(2))presents a significant hurdle in realizing its full potential applications.Here,we utilize theoretical calculations to predict possible functionalized graphene quantum dots(GQDs),which can enhance HER activity of bulk MoS_(2).Subsequently,we design a functionalized GQD-induced in-situ bottom-up strategy to fabricate near atom-layer 2H-MoS_(2) nanosheets mediated with GQDs(ALQD)by modulating the concentration of electron withdrawing/donating functional groups.Experimental results reveal that the introduction of a series of functionalized GQDs during the synthesis of ALQD plays a crucial role.Notably,the higher the concentration and strength of electron-withdrawing functional groups on GQDs,the thinner and more active the resulting ALQD are.Remarkably,the synthesized near atom-layer ALQD-SO_(3)demonstrate significantly improved HER performance.Our GQD-induced strategy provides a simple and efficient approach for expanding the catalytic application of MoS_(2).Furthermore,it holds substantial potential for developing nanosheets in other transition-metal dichalcogenide materials.
