An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the de...An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the device are presented, and the static and dynamic electrical performances are analysed. By comparison with the conventional structure, the proposed structure exhibits a superior frequency response while possessing better DC characteristics. A p-type spacer layer, inserted between the oxide and the channel, is shown to suppress the surface trap effect and improve the distribution of the electric field at the gate edge. Meanwhile, a lightly doped n-type buffer layer under the gate reduces depletion in the channel, resulting in an increase in the output current and a reduction in the gate-capacitance. The structural parameter dependences of the device performance are discussed, and an optimized design is obtained. The results show that the maximum saturation current density of 325 mA/mm is yielded, compared with 182 mA/mm for conventional MESFETs under the condition that the breakdown voltage of the proposed MESFET is larger than that of the conventional MESFET, leading to an increase of 79% in the output power density. In addition, improvements of 27% cut-off frequency and 28% maximum oscillation frequency are achieved compared with a conventional MESFET, respectively.展开更多
A new 4H silicon carbide metal semiconductor field-effect transistor （4H-SiC MESFET） structure with a buffer layer between the gate and the channel layer is proposed in this paper for high power microwave applicatio...A new 4H silicon carbide metal semiconductor field-effect transistor （4H-SiC MESFET） structure with a buffer layer between the gate and the channel layer is proposed in this paper for high power microwave applications. The physics-based analytical models for calculating the performance of the proposed device are obtained by solving one- and two-dimensional Poisson＇s equations. In the models, we take into account not only two regions under the gate but also a third high field region between the gate and the drain which is usually omitted. The direct-current and the alternating- current performances for the proposed 4H-SiC MESFET with a buffer layer of 0.2 ~tm are calculated. The calculated results are in good agreement with the experimental data. The current is larger than that of the conventional structure. The cutoff frequency （fT） and the maximum oscillation frequency （fmax） are 20.4 GHz and 101.6 GHz, respectively, which are higher than 7.8 GHz and 45.3 GHz of the conventional structure. Therefore, the proposed 4H-SiC MESFET structure has better power and microwave performances than the conventional structure.展开更多
We present the design consideration and fabrication of 4H-SiC trenched-and-implanted vertical junction field-effect transistors （TI-VJFETs）. Different design factors, including channel width, channel doping, and mes...We present the design consideration and fabrication of 4H-SiC trenched-and-implanted vertical junction field-effect transistors （TI-VJFETs）. Different design factors, including channel width, channel doping, and mesa height, are con- sidered and evaluated by numerical simulations. Based on the simulation result, normally-on and normally-off devices are fabricated. The fabricated device has a 12 μm thick drift layer with 8 × 10^15 cm^-3 N-type doping and 2.6 μm channel length. The normally-on device shows a 1.2 kV blocking capability with a minimum on-state resistance of 2.33 mΩ.cm2, while the normally-off device shows an on-state resistance of 3.85 mΩ.cm2. Both the on-state and the blocking performances of the device are close to the state-of-the-art values in this voltage range.展开更多
研究了寄生电感对基于常通型碳化硅(silicon carbide,SiC)结型场效应晶体管(junction field effect transistor,JFET)串联结构的中压直流固态断路器(solid state circuit breaker,SSCB)过电压的影响,并在此基础上提出了一种SSCB的过电...研究了寄生电感对基于常通型碳化硅(silicon carbide,SiC)结型场效应晶体管(junction field effect transistor,JFET)串联结构的中压直流固态断路器(solid state circuit breaker,SSCB)过电压的影响,并在此基础上提出了一种SSCB的过电压抑制方法。首先介绍了基于常通型SiC JFET器件串联结构的SSCB拓扑及工作原理,建立了考虑完整回路寄生电感的SiC JFET串联结构开关过程的数学模型。其次利用MATLAB软件对数学模型进行解析计算,揭示了SSCB开关过程中寄生电感对SiC JFET器件串联运行时过电压的影响机理,并利用PSPICE仿真结果验证了理论分析的正确性。最后设计了一种适用于SSCB过电压抑制的单栅极驱动及缓冲电路,并通过SSCB实验样机验证了所提方法的有效性。展开更多
Experiments and simulation studies on 283 MeV I ion induced single event effects of silicon carbide(SiC) metal–oxide–semiconductor field-effect transistors(MOSFETs) were carried out. When the cumulative irradiation ...Experiments and simulation studies on 283 MeV I ion induced single event effects of silicon carbide(SiC) metal–oxide–semiconductor field-effect transistors(MOSFETs) were carried out. When the cumulative irradiation fluence of the SiC MOSFET reached 5×10^(6)ion·cm^(-2), the drain–gate channel current increased under 200 V drain voltage, the drain–gate channel current and the drain–source channel current increased under 350 V drain voltage. The device occurred single event burnout under 800 V drain voltage, resulting in a complete loss of breakdown voltage. Combined with emission microscope, scanning electron microscope and focused ion beam analysis, the device with increased drain–gate channel current and drain–source channel current was found to have drain–gate channel current leakage point and local source metal melt, and the device with single event burnout was found to have local melting of its gate, source, epitaxial layer and substrate. Combining with Monte Carlo simulation and TCAD electrothermal simulation, it was found that the initial area of single event burnout might occur at the source–gate corner or the substrate–epitaxial interface, electric field and current density both affected the lattice temperature peak. The excessive lattice temperature during the irradiation process appeared at the local source contact, which led to the drain–source channel damage. And the excessive electric field appeared in the gate oxide layer, resulting in drain–gate channel damage.展开更多
Radiation effects of silicon carbide metal–oxide–semiconductor field-effect transistors(SiC MOSFETs)induced by 20 MeV proton under drain bias(V_(D)=800 V,V_(G)=0 V),gate bias(V_(D)=0 V,V_(G)=10 V),turn-on bias(V_(D)...Radiation effects of silicon carbide metal–oxide–semiconductor field-effect transistors(SiC MOSFETs)induced by 20 MeV proton under drain bias(V_(D)=800 V,V_(G)=0 V),gate bias(V_(D)=0 V,V_(G)=10 V),turn-on bias(V_(D)=0.5 V,V_(G)=4 V)and static bias(V_(D)=0 V,V_(G)=0 V)are investigated.The drain current of SiC MOSFET under turn-on bias increases linearly with the increase of proton fluence during the proton irradiation.When the cumulative proton fluence reaches 2×10^(11)p·cm^(-2),the threshold voltage of SiC MOSFETs with four bias conditions shifts to the left,and the degradation of electrical characteristics of SiC MOSFETs with gate bias is the most serious.In the deep level transient spectrum test,it is found that the defect energy level of SiC MOSFET is mainly the ON2(E_(c)-1.1 eV)defect center,and the defect concentration and defect capture cross section of SiC MOSFET with proton radiation under gate bias increase most.By comparing the degradation of SiC MOSFET under proton cumulative irradiation,equivalent 1 MeV neutron irradiation and gamma irradiation,and combining with the defect change of SiC MOSFET under gamma irradiation and the non-ionizing energy loss induced by equivalent 1 MeV neutron in SiC MOSFET,the degradation of SiC MOSFET induced by proton is mainly caused by ionizing radiation damage.The results of TCAD analysis show that the ionizing radiation damage of SiC MOSFET is affected by the intensity and direction of the electric field in the oxide layer and epitaxial layer.展开更多
碳化硅金属氧化物半导体场效应管SiC MOSFET(silicon carbide metal oxide semiconductor field effect tra-nsistor)以其优异的材料特性成为一种很有前景的高功率密度和高效率器件,而结温是其设计和工作的一个重要参数,也是健康状态的...碳化硅金属氧化物半导体场效应管SiC MOSFET(silicon carbide metal oxide semiconductor field effect tra-nsistor)以其优异的材料特性成为一种很有前景的高功率密度和高效率器件,而结温是其设计和工作的一个重要参数,也是健康状态的重要指标。为了状态监控的需求,提出一种受自热影响较少的基于准阈值电压的结温提取方法。首先,从理论层面证实了阈值电压VTH与温度有良好的线性关系,具有负的温度敏感度。然后,实验观察了外部驱动电阻RGext对VTH的影响。最后,结合智能驱动提出了获取准阈值电压的电路,实验结果证实了所提方法的可行性。展开更多
基金Project supported by the National Science Fund for Distinguished Young Scholars of China(Grant No.60725415)the National Natural Science Foundation of China(Grant No.60606006)the Pre-research Foundation of China(Grant No.51308030201)
文摘An improved structure of silicon carbide metal-semiconductor field-effect transistors （MESFET） is proposed for high power microwave applications. Numerical models for the physical and electrical mechanisms of the device are presented, and the static and dynamic electrical performances are analysed. By comparison with the conventional structure, the proposed structure exhibits a superior frequency response while possessing better DC characteristics. A p-type spacer layer, inserted between the oxide and the channel, is shown to suppress the surface trap effect and improve the distribution of the electric field at the gate edge. Meanwhile, a lightly doped n-type buffer layer under the gate reduces depletion in the channel, resulting in an increase in the output current and a reduction in the gate-capacitance. The structural parameter dependences of the device performance are discussed, and an optimized design is obtained. The results show that the maximum saturation current density of 325 mA/mm is yielded, compared with 182 mA/mm for conventional MESFETs under the condition that the breakdown voltage of the proposed MESFET is larger than that of the conventional MESFET, leading to an increase of 79% in the output power density. In addition, improvements of 27% cut-off frequency and 28% maximum oscillation frequency are achieved compared with a conventional MESFET, respectively.
基金Project supported by the Pre-research Foundation from the National Ministries and Commissions of China(Grant No.51308030201)
文摘A new 4H silicon carbide metal semiconductor field-effect transistor （4H-SiC MESFET） structure with a buffer layer between the gate and the channel layer is proposed in this paper for high power microwave applications. The physics-based analytical models for calculating the performance of the proposed device are obtained by solving one- and two-dimensional Poisson＇s equations. In the models, we take into account not only two regions under the gate but also a third high field region between the gate and the drain which is usually omitted. The direct-current and the alternating- current performances for the proposed 4H-SiC MESFET with a buffer layer of 0.2 ~tm are calculated. The calculated results are in good agreement with the experimental data. The current is larger than that of the conventional structure. The cutoff frequency （fT） and the maximum oscillation frequency （fmax） are 20.4 GHz and 101.6 GHz, respectively, which are higher than 7.8 GHz and 45.3 GHz of the conventional structure. Therefore, the proposed 4H-SiC MESFET structure has better power and microwave performances than the conventional structure.
基金supported by the National High Technology Research and Development Program of China(Grant No.2011AA050401)the National Science Fundfor Distinguished Young Scholars,China(Grant No.51225701)
文摘We present the design consideration and fabrication of 4H-SiC trenched-and-implanted vertical junction field-effect transistors （TI-VJFETs）. Different design factors, including channel width, channel doping, and mesa height, are con- sidered and evaluated by numerical simulations. Based on the simulation result, normally-on and normally-off devices are fabricated. The fabricated device has a 12 μm thick drift layer with 8 × 10^15 cm^-3 N-type doping and 2.6 μm channel length. The normally-on device shows a 1.2 kV blocking capability with a minimum on-state resistance of 2.33 mΩ.cm2, while the normally-off device shows an on-state resistance of 3.85 mΩ.cm2. Both the on-state and the blocking performances of the device are close to the state-of-the-art values in this voltage range.
基金supported by the National Natural Science Foundation of China (Grant No. 12075065)。
文摘Experiments and simulation studies on 283 MeV I ion induced single event effects of silicon carbide(SiC) metal–oxide–semiconductor field-effect transistors(MOSFETs) were carried out. When the cumulative irradiation fluence of the SiC MOSFET reached 5×10^(6)ion·cm^(-2), the drain–gate channel current increased under 200 V drain voltage, the drain–gate channel current and the drain–source channel current increased under 350 V drain voltage. The device occurred single event burnout under 800 V drain voltage, resulting in a complete loss of breakdown voltage. Combined with emission microscope, scanning electron microscope and focused ion beam analysis, the device with increased drain–gate channel current and drain–source channel current was found to have drain–gate channel current leakage point and local source metal melt, and the device with single event burnout was found to have local melting of its gate, source, epitaxial layer and substrate. Combining with Monte Carlo simulation and TCAD electrothermal simulation, it was found that the initial area of single event burnout might occur at the source–gate corner or the substrate–epitaxial interface, electric field and current density both affected the lattice temperature peak. The excessive lattice temperature during the irradiation process appeared at the local source contact, which led to the drain–source channel damage. And the excessive electric field appeared in the gate oxide layer, resulting in drain–gate channel damage.
基金Project supported by the National Natural Science Foundation of China(Grant No.12075065)。
文摘Radiation effects of silicon carbide metal–oxide–semiconductor field-effect transistors(SiC MOSFETs)induced by 20 MeV proton under drain bias(V_(D)=800 V,V_(G)=0 V),gate bias(V_(D)=0 V,V_(G)=10 V),turn-on bias(V_(D)=0.5 V,V_(G)=4 V)and static bias(V_(D)=0 V,V_(G)=0 V)are investigated.The drain current of SiC MOSFET under turn-on bias increases linearly with the increase of proton fluence during the proton irradiation.When the cumulative proton fluence reaches 2×10^(11)p·cm^(-2),the threshold voltage of SiC MOSFETs with four bias conditions shifts to the left,and the degradation of electrical characteristics of SiC MOSFETs with gate bias is the most serious.In the deep level transient spectrum test,it is found that the defect energy level of SiC MOSFET is mainly the ON2(E_(c)-1.1 eV)defect center,and the defect concentration and defect capture cross section of SiC MOSFET with proton radiation under gate bias increase most.By comparing the degradation of SiC MOSFET under proton cumulative irradiation,equivalent 1 MeV neutron irradiation and gamma irradiation,and combining with the defect change of SiC MOSFET under gamma irradiation and the non-ionizing energy loss induced by equivalent 1 MeV neutron in SiC MOSFET,the degradation of SiC MOSFET induced by proton is mainly caused by ionizing radiation damage.The results of TCAD analysis show that the ionizing radiation damage of SiC MOSFET is affected by the intensity and direction of the electric field in the oxide layer and epitaxial layer.
文摘碳化硅金属氧化物半导体场效应管SiC MOSFET(silicon carbide metal oxide semiconductor field effect tra-nsistor)以其优异的材料特性成为一种很有前景的高功率密度和高效率器件,而结温是其设计和工作的一个重要参数,也是健康状态的重要指标。为了状态监控的需求,提出一种受自热影响较少的基于准阈值电压的结温提取方法。首先,从理论层面证实了阈值电压VTH与温度有良好的线性关系,具有负的温度敏感度。然后,实验观察了外部驱动电阻RGext对VTH的影响。最后,结合智能驱动提出了获取准阈值电压的电路,实验结果证实了所提方法的可行性。
