We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use...We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.展开更多
Overloads of vehicle may cause damage to bridge structures,and how to assess the safety influence of heavy vehicles crossing the prototype bridge is one of the challenges.In this report,using a large amount of monitor...Overloads of vehicle may cause damage to bridge structures,and how to assess the safety influence of heavy vehicles crossing the prototype bridge is one of the challenges.In this report,using a large amount of monitored data collected from the structural health monitoring system(SHMS)in service of the prototype bridge,of which the bridge type is large-span continuous rigid frame bridge,and adopting FEM simulation technique,we suggested a dynamic reliability assessment method in the report to assess the safety impact of heavy vehicles on the prototype bridge during operation.In the first place,by using the health monitored strain data,of which the selected monitored data time range is before the opening of traffic,the quasi dynamic reliability around the embedded sensor with no traffic load effects is obtained;then,with FEM technology,the FEM simulation model of one main span of the prototype bridge is built by using ANSYS software and then the dynamic reliability when the heavy vehicles crossing the prototype bridge corresponding to the middle-span web plate is comprehensively analyzed and discussed.At last,assuming that the main beam stress state change is in the stage of approximately linear elasticity under heavy vehicle loads impact,the authors got the impact level of heavy vehicles effects on the dynamic reliability of the prototype bridge.Based on a large number of field measured data,the dynamic reliability value calculated by our proposed methodology is more accurate.The method suggested in the paper can do good for not only the traffic management but also the damage analysis of bridges.展开更多
Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professiona...Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professional teaching in armed police academies are analyzed in this article.Secondly,in view of the difficulties encountered in the organization and implementation of practical teaching as well as in the development of the current teaching,this article explores the impact of simulation technology in its application in teaching methods,training practices,and teaching channels.展开更多
The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with th...The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with the author’s experience in introducing virtual simulation and three-dimensional(3D)animation technology into relevant course teaching in recent years,discusses the application of virtual simulation and 3D animation technology in higher vocational education and promotes classroom revolution,to obtain better teaching effect.展开更多
As critical measures to educate and cultivate people’s morality,“Ideology and Politics of Course”has gradually become the focus in actual undergraduate education research in universities.Targeting the single ideolo...As critical measures to educate and cultivate people’s morality,“Ideology and Politics of Course”has gradually become the focus in actual undergraduate education research in universities.Targeting the single ideological and political education mode and students’lack of interest in experimental courses,this paper,through various links,including pre-class preview,in-class teaching,and after-class data analysis,takes the common emitter single tube amplifier experiment as an example to organically integrate the excavated ideological and political elements with practical operation and carry out teaching case design and practice;realize the improvement of students’learning initiative and problem-analysis ability;and achieve the purpose of cultivating people throughout the whole process and in a comprehensive direction.展开更多
Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic h...Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic hydrogels are prepared by regulating the complexation effect,solution polarity and curing speed.Meanwhile,collagen peptide is used to facilitate the fabrication of a porous aerogel with excellent physical properties as well as the homogeneous dispersion of magnetic particles during calcination.Subsequently,two kinds of heterometallic magnetic coupling systems are obtained through the application of Kirkendall effect.FeCo/nitrogen-doped carbon(NC)aerogel demonstrates an ultra-strong microwave absorption of−85 dB at an ultra-low loading of 5%.After reducing the time taken by atom shifting,a FeCo/Fe3O4/NC aerogel containing virus-shaped particles is obtained,which achieves an ultra-broad absorption of 7.44 GHz at an ultra-thin thickness of 1.59 mm due to the coupling effect offered by dual-soft-magnetic particles.Furthermore,both aerogels show excellent thermal insulation property,and their outstanding radar stealth performances in J-20 aircraft are confirmed by computer simulation technology.The formation mechanism of MOG is also discussed along with the thermal insulation and electromagnetic wave absorption mechanism of the aerogels,which will enable the development and application of novel and lightweight stealth coatings.展开更多
A variety of methods based on air quality models,including tracer methods,the bruteforce method(BFM),decoupled direct method(DDM),high-order decoupled direct method(HDDM),response surface models(RSMs)and so on forth,h...A variety of methods based on air quality models,including tracer methods,the bruteforce method(BFM),decoupled direct method(DDM),high-order decoupled direct method(HDDM),response surface models(RSMs)and so on forth,have been widely used to study the transport of air pollutants.These methods have good applicability for the transport of air pollutants with simple formation mechanisms.However,differences in research conclusions on secondary pollutants with obvious nonlinear characteristics have been reported.For example,the tracer method is suitable for the study of simpli?ed scenarios,while HDDM and RSMs are more suitable for the study for nonlinear pollutants.Multiple observation techniques,including conventional air pollutant observation,lidar observation,air sounding balloons,vehicle-mounted and ship-borne technology,aerial surveys,and remote sensing observations,have been utilized to investigate air pollutant transport characteristics with time resolution as high as 1 sec.In addition,based on a multi-regional input-output model combined with emission inventories,the transfer of air pollutant emissions can be evaluated and applied to study the air pollutant transport characteristics.Observational technologies have advantages in temporal resolution and accuracy,while modeling technologies are more?exible in spatial resolution and research plan setting.In order to accurately quantify the transport characteristics of pollutants,it is necessary to develop a research method for interactive veri?cation of observation and simulation.Quantitative evaluation of the transport of air pollutants from different angles can provide a scienti?c basis for regional joint prevention and control.展开更多
This research analyzes and implements an innovative and tiny ultrawideband(UWB)antenna with band-notched features for body-centric communication.The shape of the designed antenna looks like a‘swan’with a slotted pat...This research analyzes and implements an innovative and tiny ultrawideband(UWB)antenna with band-notched features for body-centric communication.The shape of the designed antenna looks like a‘swan’with a slotted patch.Computer Simulation Technology(CST)is used to assess and investigate the performance of this antenna.With a band notch,this antenna can prevent interference from Wireless Local Area Network(WLAN)(5.15–5.825 GHz)and Worldwide Interoperability for Microwave Access(WiMAX)(5.25–5.85 GHz)systems.At first,the performance parameters like return loss response,gain,radiation patterns,and radiation efficiency of this UWB antenna are evaluated.After that,the human body effects on the antenna performance of the antenna are also examined to place the antenna at various distances away from 3-layers of phantom body model at different frequencies.All the on-body performance parameter results are compared and analyzed with free space performance parameter results.Lastly,by changing patch slot length and ground plane length,parametric studies were done for performance comparison.According to this research,it is noticed that the antenna is tiny and new.It shows good performance in body case as well.Hence,the antenna is very suitable for healthcare applications.展开更多
The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture cont...The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.展开更多
The modeling and simulation(M&S)architecture describes and defines the relationship between the different parts of a simulation.The simulation system architecture and simulation support platform architecture are d...The modeling and simulation(M&S)architecture describes and defines the relationship between the different parts of a simulation.The simulation system architecture and simulation support platform architecture are discussed separately.The simulation support platform architecture consists of the management layer,the resource layer,the communication layer,the application layer and the infrastructure layer.The best way is to design and realize the M&S collaborative environment for simulation support platform in the resource-communication-application three-dimension space.展开更多
基金the Chongqing Engineering College Educational Teaching Reform Research Project“Practical Teaching Research of Road Engineering Construction Technology and Organization Course Based on BIM+Virtual Simulation Technology”(Project No.JY2021310).
文摘We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.
文摘Overloads of vehicle may cause damage to bridge structures,and how to assess the safety influence of heavy vehicles crossing the prototype bridge is one of the challenges.In this report,using a large amount of monitored data collected from the structural health monitoring system(SHMS)in service of the prototype bridge,of which the bridge type is large-span continuous rigid frame bridge,and adopting FEM simulation technique,we suggested a dynamic reliability assessment method in the report to assess the safety impact of heavy vehicles on the prototype bridge during operation.In the first place,by using the health monitored strain data,of which the selected monitored data time range is before the opening of traffic,the quasi dynamic reliability around the embedded sensor with no traffic load effects is obtained;then,with FEM technology,the FEM simulation model of one main span of the prototype bridge is built by using ANSYS software and then the dynamic reliability when the heavy vehicles crossing the prototype bridge corresponding to the middle-span web plate is comprehensively analyzed and discussed.At last,assuming that the main beam stress state change is in the stage of approximately linear elasticity under heavy vehicle loads impact,the authors got the impact level of heavy vehicles effects on the dynamic reliability of the prototype bridge.Based on a large number of field measured data,the dynamic reliability value calculated by our proposed methodology is more accurate.The method suggested in the paper can do good for not only the traffic management but also the damage analysis of bridges.
文摘Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professional teaching in armed police academies are analyzed in this article.Secondly,in view of the difficulties encountered in the organization and implementation of practical teaching as well as in the development of the current teaching,this article explores the impact of simulation technology in its application in teaching methods,training practices,and teaching channels.
基金2021 Chongqing Energy Vocational College Science and Technology Department Teaching Reform Project"Discussion and Practice of Teaching Reform of"Bridge and Culvert Engineering Construction Technology"Based on Road and Bridge Simulation Software"(202106)。
文摘The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with the author’s experience in introducing virtual simulation and three-dimensional(3D)animation technology into relevant course teaching in recent years,discusses the application of virtual simulation and 3D animation technology in higher vocational education and promotes classroom revolution,to obtain better teaching effect.
基金This paper was supported by the 2021 School-Level Education Reform Project of Hainan Tropical Ocean University Fund(RHYjg2021sz03).
文摘As critical measures to educate and cultivate people’s morality,“Ideology and Politics of Course”has gradually become the focus in actual undergraduate education research in universities.Targeting the single ideological and political education mode and students’lack of interest in experimental courses,this paper,through various links,including pre-class preview,in-class teaching,and after-class data analysis,takes the common emitter single tube amplifier experiment as an example to organically integrate the excavated ideological and political elements with practical operation and carry out teaching case design and practice;realize the improvement of students’learning initiative and problem-analysis ability;and achieve the purpose of cultivating people throughout the whole process and in a comprehensive direction.
基金the National Natural Science Foundation of China(22265021)the Aeronautical Science Foundation of China(2020Z056056003).
文摘Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic hydrogels are prepared by regulating the complexation effect,solution polarity and curing speed.Meanwhile,collagen peptide is used to facilitate the fabrication of a porous aerogel with excellent physical properties as well as the homogeneous dispersion of magnetic particles during calcination.Subsequently,two kinds of heterometallic magnetic coupling systems are obtained through the application of Kirkendall effect.FeCo/nitrogen-doped carbon(NC)aerogel demonstrates an ultra-strong microwave absorption of−85 dB at an ultra-low loading of 5%.After reducing the time taken by atom shifting,a FeCo/Fe3O4/NC aerogel containing virus-shaped particles is obtained,which achieves an ultra-broad absorption of 7.44 GHz at an ultra-thin thickness of 1.59 mm due to the coupling effect offered by dual-soft-magnetic particles.Furthermore,both aerogels show excellent thermal insulation property,and their outstanding radar stealth performances in J-20 aircraft are confirmed by computer simulation technology.The formation mechanism of MOG is also discussed along with the thermal insulation and electromagnetic wave absorption mechanism of the aerogels,which will enable the development and application of novel and lightweight stealth coatings.
基金supported by the National Key R&D Program of China(No.2018YFC0213200)。
文摘A variety of methods based on air quality models,including tracer methods,the bruteforce method(BFM),decoupled direct method(DDM),high-order decoupled direct method(HDDM),response surface models(RSMs)and so on forth,have been widely used to study the transport of air pollutants.These methods have good applicability for the transport of air pollutants with simple formation mechanisms.However,differences in research conclusions on secondary pollutants with obvious nonlinear characteristics have been reported.For example,the tracer method is suitable for the study of simpli?ed scenarios,while HDDM and RSMs are more suitable for the study for nonlinear pollutants.Multiple observation techniques,including conventional air pollutant observation,lidar observation,air sounding balloons,vehicle-mounted and ship-borne technology,aerial surveys,and remote sensing observations,have been utilized to investigate air pollutant transport characteristics with time resolution as high as 1 sec.In addition,based on a multi-regional input-output model combined with emission inventories,the transfer of air pollutant emissions can be evaluated and applied to study the air pollutant transport characteristics.Observational technologies have advantages in temporal resolution and accuracy,while modeling technologies are more?exible in spatial resolution and research plan setting.In order to accurately quantify the transport characteristics of pollutants,it is necessary to develop a research method for interactive veri?cation of observation and simulation.Quantitative evaluation of the transport of air pollutants from different angles can provide a scienti?c basis for regional joint prevention and control.
基金Taif University Researchers are supporting project number(TURSP-2020/216),Taif University,Taif,Saudi Arabia.
文摘This research analyzes and implements an innovative and tiny ultrawideband(UWB)antenna with band-notched features for body-centric communication.The shape of the designed antenna looks like a‘swan’with a slotted patch.Computer Simulation Technology(CST)is used to assess and investigate the performance of this antenna.With a band notch,this antenna can prevent interference from Wireless Local Area Network(WLAN)(5.15–5.825 GHz)and Worldwide Interoperability for Microwave Access(WiMAX)(5.25–5.85 GHz)systems.At first,the performance parameters like return loss response,gain,radiation patterns,and radiation efficiency of this UWB antenna are evaluated.After that,the human body effects on the antenna performance of the antenna are also examined to place the antenna at various distances away from 3-layers of phantom body model at different frequencies.All the on-body performance parameter results are compared and analyzed with free space performance parameter results.Lastly,by changing patch slot length and ground plane length,parametric studies were done for performance comparison.According to this research,it is noticed that the antenna is tiny and new.It shows good performance in body case as well.Hence,the antenna is very suitable for healthcare applications.
基金The Science&Technology Innovation Action Plan of International Science and Technology Cooperation Projects from SSTEC(No.14510711600)
文摘The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.
基金supported by the National Natural Science Foundation of China(Grant No.60404016).
文摘The modeling and simulation(M&S)architecture describes and defines the relationship between the different parts of a simulation.The simulation system architecture and simulation support platform architecture are discussed separately.The simulation support platform architecture consists of the management layer,the resource layer,the communication layer,the application layer and the infrastructure layer.The best way is to design and realize the M&S collaborative environment for simulation support platform in the resource-communication-application three-dimension space.
