A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical f...A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical fiber. Small changes in the refractive index of coating film greatly influence the power of evanescent fields, which modulate the transmission optical power in the waist region. The range of temperature measured is from 20°C to 70°C. The results show that the temperature sensor has high temperature sensitivity (0.012 mW/°C) and good repeatability.展开更多
We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-enve...We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-envelope offset signal of the Yb:fiber comb is measured with a signal-to-noise ratio of more than 40 dB and a linewidth narrower than120 k Hz. The repetition rate and carrier-envelope offset signals are simultaneously phase locked to a microwave reference frequency.展开更多
Objective: To establish a DNA detection platform based on a tapered optical fiber to detect Leptospira DNA by targeting the leptospiral secY gene.Methods: The biosensor works on the principle of light propagating in t...Objective: To establish a DNA detection platform based on a tapered optical fiber to detect Leptospira DNA by targeting the leptospiral secY gene.Methods: The biosensor works on the principle of light propagating in the special geometry of the optical fiber tapered from a waist diameter of 125 to 12 μm. The fiber surface was functionalized through a cascade of chemical treatments and the immobilization of a DNA capture probe targeting the secY gene. The presence of the target DNA was determined from the wavelength shift in the optical transmission spectrum.Results: The biosensor demonstrated good sensitivity, detecting Leptospira DNA at 0.001 ng/μL, and was selective for Leptospira DNA without cross-reactivity with non-leptospiral microorganisms. The biosensor specifically detected DNA that was specifically amplified through the loop-mediated isothermal amplification approach.Conclusions: These findings warrant the potential of this platform to be developed as a novel alternative approach to diagnose leptospirosis.展开更多
We propose and demonstrate a passively mode-locked erbium-doped fiber laser(EDFL)based on zinc-oxide/polydimethylsiloxane(ZnO/PDMS)saturable absorber(SA)that evanescently interacts with the light on a tapered fiber.Th...We propose and demonstrate a passively mode-locked erbium-doped fiber laser(EDFL)based on zinc-oxide/polydimethylsiloxane(ZnO/PDMS)saturable absorber(SA)that evanescently interacts with the light on a tapered fiber.The ZnO/PDMS composite is coated on the whole surface of the tapered fiber to guarantee the maximum efficiency of the SA device,with a measured insertion loss of 0.87 dB and a modulation depth of 6.4%.The proposed laser can generate soliton mode-locking operation at a threshold power of 33.07 mW.The generated output pulse yields a repetition rate and pulse width of 9.77 MHz and 1.03 ps,respectively.These results indicate that the proposed ZnO/PDMS-clad tapered fiber could be useful as an efficient,compatible,and low-cost SA device for ultrafast laser applications.展开更多
This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode fiel...This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode field characteristics of single-mode fibers with arbitrary refractive index profiles.Our computationshows that the mathematical algorithm and the corresponding programs developeod in this paper are rela-tively simple and accurate enough for the engineenring design of single-mode fibers for optical communica-tion systems.展开更多
Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes,the single-mode operation can be realized in any antiresonant fibers(ARFs)when satisfying that ...Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes,the single-mode operation can be realized in any antiresonant fibers(ARFs)when satisfying that the area ratio of cladding tube and core is about 0.46:1,and this area ratio also should be modified according to the shape and the number of cladding tubes.In the ARF with nodal core boundary,the mode in core also can couple with the mode in the wall of core boundary,which can further enhance the suppression of high-order mode.Accordingly,an ARF with conjoint semi-elliptical cladding tubes realizes a loss of higher-order mode larger than 30 dB/m;simultaneously,a loss of fundamental mode loss less than 0.4 dB/m.展开更多
Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind...Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed.To achieve the single-polarization single-mode transmission,we use two different silica tubes in thickness,which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes,respectively.Besides,the elliptical elements are introduced to achieve good single-mode performance.By studying the influences of the structure parameters on the propagation characteristics,the optimized structure parameters are obtained.The simulation results show that when the wavelength is fixed at 1550 nm,the single-polarization single-mode transmission is achieved,with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174.Furthermore,the confinement loss is only 0.0015 dB/m.展开更多
A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated.The filter tunability is achieved by rotating the pola...A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated.The filter tunability is achieved by rotating the polarization controller.The spectral shift is dependent on rotation direction and the position of the polarization controller.In addition,the adjustable range achieved by rotating the half-wave-plate polarization controller is twice higher than that of the quarter-wave-plate one.展开更多
To find out the effect of the shape of fused taper region on the optical fiber coupler, the fiber couplers were fabricated at different drawing speeds with a six-axes fiber coupler machine. The results, which were obt...To find out the effect of the shape of fused taper region on the optical fiber coupler, the fiber couplers were fabricated at different drawing speeds with a six-axes fiber coupler machine. The results, which were obtained from the shape of fused taper region measured with microscope, show that there is a close correlation between the cone angle and optical performance of fiber coupler. High-performance fiber coupler cannot be obtained until rheological shape is controlled accurately. The numerical analysis model, which was built based on generalized Maxwell viscoelastic theory, is resolved with ANSYS software. The calculated results accord with the experimental data. It can apply a theoretic basis for forecasting the shape of fiber coupler fabricated under the conditions of different technological parameters.展开更多
In order to improve ability of amplification about optical arrival angle in laser eavesdropping system, and enhance receiving field of view (FOV) of laser eavesdropping system, this paper presents a new multistage amp...In order to improve ability of amplification about optical arrival angle in laser eavesdropping system, and enhance receiving field of view (FOV) of laser eavesdropping system, this paper presents a new multistage amplifier laser eavesdropping model based on waveguide fiber taper. First of all, taking about four-quadrant (4QD) laser eavesdropping model as an example, from the theoretical view, analyses factors that, currently, laser eavesdropping system face many restrictive factors during practical applications. Besides, from the receiving FOV and ability of amplification about arrival angle of incoming optical axis angles, systematically analyses advantages of multi-stage amplifier model. What’s more,through constructing laser eavesdropping test platform, we demonstrate Signal to Noise Ratio(SNR) of two stage amplification model is eventually promoted to 6-10 dB compared with one amplifying model,especially in low and high audio level, the advantages is more obvious.展开更多
By stretching the rod waveguide with different velocities in opposite directions,the tapered waveguide can be fabricated.In condition of taking no account of volume expansion caused by heating and under the assumption...By stretching the rod waveguide with different velocities in opposite directions,the tapered waveguide can be fabricated.In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors,that is the ratio of two velocity and the heated region length,is presented for the shape of the taper transition through mathematic deduction.Based on this model,a desired tapered waveguide can be fabricated.The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors.In addition,the conclusion can be used for fabricating fused fiber coupler.展开更多
In this paper, a novel surface-enhanced Raman scattering (SERS) sensor combined with fused biconical taper fiber (FBTF) and film coated with silver sols is proposed. This structure is designed to significantly increas...In this paper, a novel surface-enhanced Raman scattering (SERS) sensor combined with fused biconical taper fiber (FBTF) and film coated with silver sols is proposed. This structure is designed to significantly increase the SERS active surface when the length of the taper is increased and the radius is reduced, since the penetration depth is inversely proportional to the taper radius and proportional to the taper length according to the fiber-optic evanescent-wave theory. Based on the SERS sensing principle, the feasibility of FBTF sensor is analyzed in this paper. As a result, the Raman spectrum of R6G is obtained from the fused biconical taper zone surface coating with the silver sols in our experiments. The detected concentration is up to 10?7mol/L.展开更多
A sensitive tapered optical fiber sensor incorporating graphene oxide(GO)and polyvinyl alcohol(PVA)composite film for the rapid measurement of changes in relative humidity was proposed and experimentally demonstrated....A sensitive tapered optical fiber sensor incorporating graphene oxide(GO)and polyvinyl alcohol(PVA)composite film for the rapid measurement of changes in relative humidity was proposed and experimentally demonstrated.The sensing principle was based on the intensity modulation of the transmitted light induced by the refractive index changes of the sensitive coatings.The sensing region was obtained by tapering a section of single-mode optical fiber(SMF)from its original 125µm diameter down to 9.03µm.The tapered structure was then modified through deposition of GO/PVA nanocomposites by using the dip-coating technique.The field emission scanning electron microscope(FESEM)and Raman spectroscopy were used to characterize the structure of the composite film.As evidenced by a Fourier transform infrared spectroscopy(FTIR)analysis,the presence of oxygen functional groups(such as−OH and COOH)on the GO structure enabled the attachment of PVA molecules through hydrogen bonding and strong adhesion between GO/PVA layers.The performance of the sensor was tested over a wide range(20%RH to 99.9%RH)of relative humidity.The sensor showed a good response with its signal increasing linearly with the surrounding humidity.The tapered optical fiber sensor with the coating of GO/0.3g PVA achieved the highest sensitivity[0.5290RH(%)].The stability,repeatability,reversibility,as well as response time of the designated sensor were also measured and analyzed.展开更多
A compact all-fiber polarization-maintaining Er:laser using a nonlinear amplifying loop mirror is reported. Fundamental single-pulse mode-locking operation can always self start, with a cavity round-trip decreased fro...A compact all-fiber polarization-maintaining Er:laser using a nonlinear amplifying loop mirror is reported. Fundamental single-pulse mode-locking operation can always self start, with a cavity round-trip decreased from ~ 4.7 m to~ 1.7 m. When the pulse repetition rate is 121.0328 MHz, output pulse is measured to have a center wavelength/3-d B spectral bandwidth/radio frequency signal to noise ratio(SNR)/pulse width of 1571.65 nm/18.70 nm/80 d B/477 fs, respectively. Besides, three states including the exponential growth, damping state, and steady state are investigated through the build-up process both experimentally and numerically. Excellent stability of this compact Er:laser is further evaluated,demonstrating that it can be an easy-fabrication maintenance-free ultrafast candidate for the scientific area of this kind.展开更多
Through theoretical analysis and experiments, the viscoelastic mechanical model of optical fiber coupler in the process of fused biconical taper was established, and the numerical analysis in non-uniform temperature f...Through theoretical analysis and experiments, the viscoelastic mechanical model of optical fiber coupler in the process of fused biconical taper was established, and the numerical analysis in non-uniform temperature field was made. The results show that the rheological parameters, such as drawing speed and fused temperature, have a tremendous influence on stress distribution and performance of optical fiber coupler, especially the influence of fused temperature. The change of fused temperature by 5℃ can lead to the change of the maximum stress by 30% and stress difference by 20% in the same cross section. The change of temperature gradient by 3% can result in the change of stress difference by 90%. In the present condition of rheological technology, rheological defects such as crystallizations and microcracks are easy to generate in the optical fiber coupler.展开更多
In this work the results of polarization researches of low-optical fiber waveguides with conservation of polarization are presented. Obtained results quite convincingly testify regarding a high sensitivity low-mode re...In this work the results of polarization researches of low-optical fiber waveguides with conservation of polarization are presented. Obtained results quite convincingly testify regarding a high sensitivity low-mode regime of work of an optical fiber to anisotropic external influences, in comparison with one-mode regime of work of the same fibre. This result, can represent a big practical value at the realization of high-sensitivity fiber-optical devices of different physical values.展开更多
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.S30108)the Universities Foster Innovation Foundation Projects for Major Projects in Ministry of Education (Grant No.708041)
文摘A temperature sensor is demonstrated and fabricated by coating the single-mode tapered optical fiber with temperature-sensitive silicone rubber. It works on the change of the evanescent fields in the tapered optical fiber. Small changes in the refractive index of coating film greatly influence the power of evanescent fields, which modulate the transmission optical power in the waist region. The range of temperature measured is from 20°C to 70°C. The results show that the temperature sensor has high temperature sensitivity (0.012 mW/°C) and good repeatability.
基金supported by the National Basic Research Program of China(973 Program)(Grant No.2012CB821304)the National Natural Science Foundation of China(Grant No.61378040)
文摘We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-envelope offset signal of the Yb:fiber comb is measured with a signal-to-noise ratio of more than 40 dB and a linewidth narrower than120 k Hz. The repetition rate and carrier-envelope offset signals are simultaneously phase locked to a microwave reference frequency.
基金funded by Universiti Putra Malaysia through the Geran Inisiatif Putra Siswazah (GP-IPS/2019/9678200)。
文摘Objective: To establish a DNA detection platform based on a tapered optical fiber to detect Leptospira DNA by targeting the leptospiral secY gene.Methods: The biosensor works on the principle of light propagating in the special geometry of the optical fiber tapered from a waist diameter of 125 to 12 μm. The fiber surface was functionalized through a cascade of chemical treatments and the immobilization of a DNA capture probe targeting the secY gene. The presence of the target DNA was determined from the wavelength shift in the optical transmission spectrum.Results: The biosensor demonstrated good sensitivity, detecting Leptospira DNA at 0.001 ng/μL, and was selective for Leptospira DNA without cross-reactivity with non-leptospiral microorganisms. The biosensor specifically detected DNA that was specifically amplified through the loop-mediated isothermal amplification approach.Conclusions: These findings warrant the potential of this platform to be developed as a novel alternative approach to diagnose leptospirosis.
基金the Ministry of Higher Education of Malaysia(MOHE)(Grant No.FRGS/1/2019/STG02/UPM/02/4).
文摘We propose and demonstrate a passively mode-locked erbium-doped fiber laser(EDFL)based on zinc-oxide/polydimethylsiloxane(ZnO/PDMS)saturable absorber(SA)that evanescently interacts with the light on a tapered fiber.The ZnO/PDMS composite is coated on the whole surface of the tapered fiber to guarantee the maximum efficiency of the SA device,with a measured insertion loss of 0.87 dB and a modulation depth of 6.4%.The proposed laser can generate soliton mode-locking operation at a threshold power of 33.07 mW.The generated output pulse yields a repetition rate and pulse width of 9.77 MHz and 1.03 ps,respectively.These results indicate that the proposed ZnO/PDMS-clad tapered fiber could be useful as an efficient,compatible,and low-cost SA device for ultrafast laser applications.
文摘This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode field characteristics of single-mode fibers with arbitrary refractive index profiles.Our computationshows that the mathematical algorithm and the corresponding programs developeod in this paper are rela-tively simple and accurate enough for the engineenring design of single-mode fibers for optical communica-tion systems.
基金Project supported by the National Natural Science Foundation of China(Grant No.62075159)the National Key Research and Development Program of China(Grant No.2017YFF0104603)+1 种基金the 111 Project of China(Grant No.B17031)the Major Scientific and Technological Innovation Projects of Key Research and Development Plans in Shandong Province,CHina(Grant No.2019JZZY020206)。
文摘Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes,the single-mode operation can be realized in any antiresonant fibers(ARFs)when satisfying that the area ratio of cladding tube and core is about 0.46:1,and this area ratio also should be modified according to the shape and the number of cladding tubes.In the ARF with nodal core boundary,the mode in core also can couple with the mode in the wall of core boundary,which can further enhance the suppression of high-order mode.Accordingly,an ARF with conjoint semi-elliptical cladding tubes realizes a loss of higher-order mode larger than 30 dB/m;simultaneously,a loss of fundamental mode loss less than 0.4 dB/m.
基金supported by the National Natural Science Foundation of China(Grant No.61935007)。
文摘Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed.To achieve the single-polarization single-mode transmission,we use two different silica tubes in thickness,which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes,respectively.Besides,the elliptical elements are introduced to achieve good single-mode performance.By studying the influences of the structure parameters on the propagation characteristics,the optimized structure parameters are obtained.The simulation results show that when the wavelength is fixed at 1550 nm,the single-polarization single-mode transmission is achieved,with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174.Furthermore,the confinement loss is only 0.0015 dB/m.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11274181,10974100,and 10674075)the Tianjin Key Program of Application Foundations and Future Technology Research Project,China (Grant No. 10JCZDJC24300)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20120031110033)
文摘A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated.The filter tunability is achieved by rotating the polarization controller.The spectral shift is dependent on rotation direction and the position of the polarization controller.In addition,the adjustable range achieved by rotating the half-wave-plate polarization controller is twice higher than that of the quarter-wave-plate one.
基金Project (50605063) supported by the National Natural Science Foundation of ChinaProject(NCET-040753) supported by New Century Excellent Talents in University, ChinaProject (20050533037) supported by the Doctoral Program of Higher Education, China
文摘To find out the effect of the shape of fused taper region on the optical fiber coupler, the fiber couplers were fabricated at different drawing speeds with a six-axes fiber coupler machine. The results, which were obtained from the shape of fused taper region measured with microscope, show that there is a close correlation between the cone angle and optical performance of fiber coupler. High-performance fiber coupler cannot be obtained until rheological shape is controlled accurately. The numerical analysis model, which was built based on generalized Maxwell viscoelastic theory, is resolved with ANSYS software. The calculated results accord with the experimental data. It can apply a theoretic basis for forecasting the shape of fiber coupler fabricated under the conditions of different technological parameters.
基金Jilin province of Science and technology development plan key scientific and technological breakthrough project.(20150204083GX,20150204049GX)The 13th five-year science and technology research project of Jilin education department.(Jilin Provincial Education and technology system 2016357)Jilin provincial science and technology smes innovation fund.(20170308029HJ)
文摘In order to improve ability of amplification about optical arrival angle in laser eavesdropping system, and enhance receiving field of view (FOV) of laser eavesdropping system, this paper presents a new multistage amplifier laser eavesdropping model based on waveguide fiber taper. First of all, taking about four-quadrant (4QD) laser eavesdropping model as an example, from the theoretical view, analyses factors that, currently, laser eavesdropping system face many restrictive factors during practical applications. Besides, from the receiving FOV and ability of amplification about arrival angle of incoming optical axis angles, systematically analyses advantages of multi-stage amplifier model. What’s more,through constructing laser eavesdropping test platform, we demonstrate Signal to Noise Ratio(SNR) of two stage amplification model is eventually promoted to 6-10 dB compared with one amplifying model,especially in low and high audio level, the advantages is more obvious.
文摘By stretching the rod waveguide with different velocities in opposite directions,the tapered waveguide can be fabricated.In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors,that is the ratio of two velocity and the heated region length,is presented for the shape of the taper transition through mathematic deduction.Based on this model,a desired tapered waveguide can be fabricated.The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors.In addition,the conclusion can be used for fabricating fused fiber coupler.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.61027015, 60677031, 60937003)the Shanghai Leading Academic Discipline Project (Grant No.30108)the Science and Technology Commission of Shanghai Municipality (Grant No.10DZ2210900)
文摘In this paper, a novel surface-enhanced Raman scattering (SERS) sensor combined with fused biconical taper fiber (FBTF) and film coated with silver sols is proposed. This structure is designed to significantly increase the SERS active surface when the length of the taper is increased and the radius is reduced, since the penetration depth is inversely proportional to the taper radius and proportional to the taper length according to the fiber-optic evanescent-wave theory. Based on the SERS sensing principle, the feasibility of FBTF sensor is analyzed in this paper. As a result, the Raman spectrum of R6G is obtained from the fused biconical taper zone surface coating with the silver sols in our experiments. The detected concentration is up to 10?7mol/L.
基金The authors would like to thank Laser Centre,Ibnu-Sina Institute for Scientific and Industrial Research(ISI-SIR),Universiti Teknologi Malaysia(UTM)for the supportThis research work has been supported by UTM_TDR 06G13 research grant+1 种基金Aneez SYUHADA and Muhammad Salleh SHAMSUDIN acknowledge the funding from the UTM Zamalah Scholarship Award supported by the School of Graduate Studies,UTMThe authors want to thank the critics of the anonymous reviewers and valuable suggestions for improving this manuscript.
文摘A sensitive tapered optical fiber sensor incorporating graphene oxide(GO)and polyvinyl alcohol(PVA)composite film for the rapid measurement of changes in relative humidity was proposed and experimentally demonstrated.The sensing principle was based on the intensity modulation of the transmitted light induced by the refractive index changes of the sensitive coatings.The sensing region was obtained by tapering a section of single-mode optical fiber(SMF)from its original 125µm diameter down to 9.03µm.The tapered structure was then modified through deposition of GO/PVA nanocomposites by using the dip-coating technique.The field emission scanning electron microscope(FESEM)and Raman spectroscopy were used to characterize the structure of the composite film.As evidenced by a Fourier transform infrared spectroscopy(FTIR)analysis,the presence of oxygen functional groups(such as−OH and COOH)on the GO structure enabled the attachment of PVA molecules through hydrogen bonding and strong adhesion between GO/PVA layers.The performance of the sensor was tested over a wide range(20%RH to 99.9%RH)of relative humidity.The sensor showed a good response with its signal increasing linearly with the surrounding humidity.The tapered optical fiber sensor with the coating of GO/0.3g PVA achieved the highest sensitivity[0.5290RH(%)].The stability,repeatability,reversibility,as well as response time of the designated sensor were also measured and analyzed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61805282,11802339,and 11504420)the Opening Foundation of State Key Laboratory of High Performance Computing,China(Grant No.201601-02)+2 种基金the Open Research Fund of Hunan Provincial Key Laboratory of High Energy Technology,China(Grant No.GNJGJS03)the Opening Foundation of State Key Laboratory of Laser Interaction with Matter,China(Grant No.SKLLIM1702)the China Postdoctoral Innovation Science Foundation(Grant No.BX20180373)
文摘A compact all-fiber polarization-maintaining Er:laser using a nonlinear amplifying loop mirror is reported. Fundamental single-pulse mode-locking operation can always self start, with a cavity round-trip decreased from ~ 4.7 m to~ 1.7 m. When the pulse repetition rate is 121.0328 MHz, output pulse is measured to have a center wavelength/3-d B spectral bandwidth/radio frequency signal to noise ratio(SNR)/pulse width of 1571.65 nm/18.70 nm/80 d B/477 fs, respectively. Besides, three states including the exponential growth, damping state, and steady state are investigated through the build-up process both experimentally and numerically. Excellent stability of this compact Er:laser is further evaluated,demonstrating that it can be an easy-fabrication maintenance-free ultrafast candidate for the scientific area of this kind.
基金Project (50235040) supported by the National Natural Science Foundation of China project( NCET-040753) supportedby the New Century Excellent Talent in University project(20050533037) supported by the Doctoral Programof Higher Education
文摘Through theoretical analysis and experiments, the viscoelastic mechanical model of optical fiber coupler in the process of fused biconical taper was established, and the numerical analysis in non-uniform temperature field was made. The results show that the rheological parameters, such as drawing speed and fused temperature, have a tremendous influence on stress distribution and performance of optical fiber coupler, especially the influence of fused temperature. The change of fused temperature by 5℃ can lead to the change of the maximum stress by 30% and stress difference by 20% in the same cross section. The change of temperature gradient by 3% can result in the change of stress difference by 90%. In the present condition of rheological technology, rheological defects such as crystallizations and microcracks are easy to generate in the optical fiber coupler.
文摘In this work the results of polarization researches of low-optical fiber waveguides with conservation of polarization are presented. Obtained results quite convincingly testify regarding a high sensitivity low-mode regime of work of an optical fiber to anisotropic external influences, in comparison with one-mode regime of work of the same fibre. This result, can represent a big practical value at the realization of high-sensitivity fiber-optical devices of different physical values.