An improved RRT∗algorithm,referred to as the AGP-RRT∗algorithm,is proposed to address the problems of poor directionality,long generated paths,and slow convergence speed in multi-axis robotic arm path planning.First,a...An improved RRT∗algorithm,referred to as the AGP-RRT∗algorithm,is proposed to address the problems of poor directionality,long generated paths,and slow convergence speed in multi-axis robotic arm path planning.First,an adaptive biased probabilistic sampling strategy is adopted to dynamically adjust the target deviation threshold and optimize the selection of random sampling points and the direction of generating new nodes in order to reduce the search space and improve the search efficiency.Second,a gravitationally adjustable step size strategy is used to guide the search process and dynamically adjust the step-size to accelerate the search speed of the algorithm.Finally,the planning path is processed by pruning,removing redundant points and path smoothing fitting using cubic B-spline curves to improve the flexibility of the robotic arm.Through the six-axis robotic arm path planning simulation experiments on the MATLAB platform,the results show that the AGP-RRT∗algorithm reduces 87.34%in terms of the average running time and 40.39%in terms of the average path cost;Meanwhile,under two sets of complex environments A and B,the average running time of the AGP-RRT∗algorithm is shortened by 94.56%vs.95.37%,and the average path cost is reduced by 55.28%vs.47.82%,which proves the effectiveness of the AGP-RRT∗algorithm in improving the efficiency of multi-axis robotic arm path planning.展开更多
The burgeoning robotics industry has catalyzed significant strides in the development and deployment of industrial and service robotic arms, positioning path planning as a pivotal facet for augmenting their operationa...The burgeoning robotics industry has catalyzed significant strides in the development and deployment of industrial and service robotic arms, positioning path planning as a pivotal facet for augmenting their operational safety and efficiency. Existing path planning algorithms, while capable of delineating feasible trajectories, often fall short of achieving optimality, particularly concerning path length, search duration, and success likelihood. This study introduces an enhanced Rapidly-Exploring Random Tree (RRT) algorithm, meticulously designed to rectify the issues of node redundancy and the compromised path quality endemic to conventional RRT approaches. Through the integration of an adaptive pruning mechanism and a dynamic elliptical search strategy within the Informed RRT* framework, our algorithm efficiently refines the search tree by discarding branches that surpass the cost of the optimal path, thereby refining the search space and significantly boosting efficiency. Extensive comparative analysis across both two-dimensional and three-dimensional simulation settings underscores the algorithm’s proficiency in markedly improving path precision and search velocity, signifying a breakthrough in the domain of robotic arm path planning.展开更多
This paper presents a dynamic model and performance constraint control of a line-driven soft robotic arm.The dynamics model of the soft robotic arm is established by combining the screw theory and the Cosserat theory....This paper presents a dynamic model and performance constraint control of a line-driven soft robotic arm.The dynamics model of the soft robotic arm is established by combining the screw theory and the Cosserat theory.The unmodeled dynamics of the system are considered,and an adaptive neural network controller is designed using the backstepping method and radial basis function neural network.The stability of the closed-loop system and the boundedness of the tracking error are verified using Lyapunov theory.The simulation results show that our approach is a good solution to the motion constraint problem of the line-driven soft robotic arm.展开更多
The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual...The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.展开更多
The development of artificial intelligence technology has promoted the rapid improvement of human-computer interaction. This system uses the Kinect visual image sensor to identify human bone data and complete the reco...The development of artificial intelligence technology has promoted the rapid improvement of human-computer interaction. This system uses the Kinect visual image sensor to identify human bone data and complete the recognition of the operator’s movements. Through the filtering process of real-time data by the host computer platform with computer software as the core, the algorithm is programmed to realize the conversion from data to control signals. The system transmits the signal to the lower computer platform with Arduino as the core through the transmission mode of the serial communication, thereby completing the control of the steering gear. In order to verify the feasibility of the theory, the team built a 4-DOF robotic arm control system and completed software development. It can display other functions such as the current bone angle and motion status in real time on the computer operation interface. The experimental data shows that the Kinect-based motion recognition method can effectively complete the tracking of the expected motion and complete the grasping and transfer of the specified objects, which has extremely high operability.展开更多
Reliable and accurate calibration for camera,inertial measurement unit(IMU)and robot is a critical prerequisite for visual-inertial based robot pose estimation and surrounding environment perception.However,traditiona...Reliable and accurate calibration for camera,inertial measurement unit(IMU)and robot is a critical prerequisite for visual-inertial based robot pose estimation and surrounding environment perception.However,traditional calibrations suffer inaccuracy and inconsistency.To address these problems,this paper proposes a monocular visual-inertial and robotic-arm calibration in a unifying framework.In our method,the spatial relationship is geometrically correlated between the sensing units and robotic arm.The decoupled estimations on rotation and translation could reduce the coupled errors during the optimization.Additionally,the robotic calibration moving trajectory has been designed in a spiral pattern that enables full excitations on 6 DOF motions repeatably and consistently.The calibration has been evaluated on our developed platform.In the experiments,the calibration achieves the accuracy with rotation and translation RMSEs less than 0.7°and 0.01 m,respectively.The comparisons with state-of-the-art results prove our calibration consistency,accuracy and effectiveness.展开更多
In order to improve the control performance of industrial robotic arms,an efficient fractional-order iterative sliding mode control method is proposed by combining fractional calculus theory with iterative learning co...In order to improve the control performance of industrial robotic arms,an efficient fractional-order iterative sliding mode control method is proposed by combining fractional calculus theory with iterative learning control and sliding mode control.In the design process of the controller,fractional approaching law and fractional sliding mode control theories are used to introduce fractional calculus into iterative sliding mode control,and Lyapunov theory is used to analyze the system stability.Then taking a two-joint robotic arm as an example,the proposed control strategy is verified by MATLAB simulation.The simulation experiments show that the fractional-order iterative sliding mode control strategy can effectively improve the tracking speed and tracking accuracy of the joint,reduce the tracking error,have strong robustness and effectively suppress the chattering phenomenon of sliding mode control.展开更多
In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on indu...In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on industrial production lines to improve the security and reliability of robot control systems. This paper designs and implements a robot control system based Snort-BASE for real-time online detection of DoS attacks. The system uses a six-degree-of-freedom robotic arm as an example, uses Snort to record the network communication data of the robot arm control system in real time, and filters the network traffic through self-defined rules, and then uses the BASE analysis platform to achieve security analysis of the network traffic. The solution verifies the effectiveness of online real-time detection of attacks and visualisation of attack records by designing simulated robotic arm and real robotic arm attack experiments respectively, thus achieving the security of network communication of the robot remote control system.展开更多
The precise control upon each degree of freedom of a robotic arm is a great challenge in implementing industrial work. This paper aims to design a novel controller for an automated robotic arm. A discrete Proportional...The precise control upon each degree of freedom of a robotic arm is a great challenge in implementing industrial work. This paper aims to design a novel controller for an automated robotic arm. A discrete Proportional Integral Derivative (PID) control technique is being used to replace the complex electronic circuitry, which would greatly reduce the cost and size of the controller. DC motors will be controlled on the basis of Closed-loop System using an avr (Atmega 16/32) microcontroller. Transfer functions have been derived for mathematical modeling of the system through which the stability of the system can be evaluated prior to fabrication.展开更多
In the development of the robotic arm in recent decades, it has been realized to operate the robotic arm according to the design of the software program to complete the corresponding specific work. It can not only wor...In the development of the robotic arm in recent decades, it has been realized to operate the robotic arm according to the design of the software program to complete the corresponding specific work. It can not only work in an environment where people can't work, but also can maintain long hours of the work, with the low failure rate. With the rapid development of the robotic arm research technology, the robotic arm has been widely used in aerospace, medicine, industrial production, anti-terrorism, and explosion and service industries. Due to the strict quality restriction, the rigidity of the robotic arm is low, and there are geometric errors and flexible deformation errors. In order to improve its performances, it is necessary to reduce the end positioning error of the robotic arm by means of the restructuring technology.展开更多
This paper presents an algorithmic proposal of a movements＇ planner for a robotic manipulator. Its application is the planning of trajectories from wooden cuttings in a band saw. This algorithm is based on heuristics...This paper presents an algorithmic proposal of a movements＇ planner for a robotic manipulator. Its application is the planning of trajectories from wooden cuttings in a band saw. This algorithm is based on heuristics. A simulator was developed in order to allow the user to define the table＇s shape and figure that you want to trim. The simulator was developed in Java from Sun Microsystems, and next it will be applied in TM Cyberbotics Webots.展开更多
Objective: To compare the effectiveness and safety of two surgical methods for lumbar degenerative diseases;the combination of the concept of accelerated rehabilitation with the assistance of Tianji Robotics and the c...Objective: To compare the effectiveness and safety of two surgical methods for lumbar degenerative diseases;the combination of the concept of accelerated rehabilitation with the assistance of Tianji Robotics and the concept of accelerated rehabilitation combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. Methods: A retrospective analysis was performed on 70 patients who received the concept of accelerated rehabilitation combined with spinal surgery for lumbar degenerative diseases in Baise People’s Hospital from January 2022 to January 2024. Among them, 35 patients in the robot group received accelerated rehabilitation concept combined with robot-assisted surgery;In the conventional C-arm group, 35 patients received the accelerated rehabilitation concept combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. VAS score (preoperative/postoperative), ODI score (preoperative/postoperative), intraoperative bleeding volume, postoperative hospital stay, postoperative complications and the accuracy rate of screw placement were compared between the two groups. Result: There was no statistically significant difference in preoperative VAS scores between the robot group and the conventional C-arm group (6.45 ± 0.82 VS 6.63 ± 0.81, P = 0.6600). The postoperative VAS score of the robot group was better than that of the conventional C-arm group (1.69 ± 0.80 VS 2.45 ± 0.85, P = 0.0000*). There was no statistically significant difference in preoperative ODI scores between the robot group and the conventional C-arm group (32.11 ± 3.18 VS 31.66 ± 2.25, P = 0.4900). The postoperative ODI score of the robot group was better than that of the conventional C-arm group (22.68 ± 1.94 VS 24.57 ± 2.25, P = 0.0000*). The postoperative complications in the robot group were less than those in the conventional C-arm group (2.7778% VS 28.5724%, P = 0.0030*). The intraoperative bleeding in the robot group was lower than that in the conventional C-arm group (320.85 ± 276.28 VS 490.00 ± 395.34, P = 0.0420*). The postoperative hospital stay of the robot group was shorter than that of the conventional C-arm group (10.00 ± 9.32 VS 14.49 ± 7.55, P = 0.0300*). The screw placement inaccuracy score of the robot group was lower than that of the conventional C-arm group (0.17 ± 0.51 VS 1.45 ± 1.46, P = 0.0000*). Conclusion: The combination of the concept of accelerated rehabilitation and Tianji Orthopedic robot-assisted surgery is more effective and safer in posterior lumbar decompression and internal fixation surgery with a screw rod system, and is worthy of promotion and application.展开更多
A description of the design stage and results of the development of the conceptual structure of a robotic prosthesis arm is given.As a result,a prototype of man-made smart prosthesis on a 3D printer as well as a found...A description of the design stage and results of the development of the conceptual structure of a robotic prosthesis arm is given.As a result,a prototype of man-made smart prosthesis on a 3D printer as well as a foundation for computational intelligence presented.The application of soft computing technology(the first step of IT)allows to extract knowledge directly from the physical signal of the electroencephalogram,as well as to form knowledge-based intelligent robust control of the lower performing level taking into account the assessment of the patient’s emotional state.The possibilities of applying quantum soft computing technologies(the second step of IT)in the processes of robust filtering of electroencephalogram signals for the formation of mental commands of robotic prosthetic arm discussed.Quantum supremacy benchmark of intelligent control simulation demonstrated.展开更多
<strong>Background:</strong><span style="font-family:;" "=""><span style="font-family:Verdana;"> Intraoperative surgical planning tools (ISPTs) used in curren...<strong>Background:</strong><span style="font-family:;" "=""><span style="font-family:Verdana;"> Intraoperative surgical planning tools (ISPTs) used in current-generation robotic arm-assisted total knee arthroplasty (RTKA) systems (such as Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> and MAKO</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;">) involve employment of postoperative passive joint balancing. This results in improper ligament tension, which may negatively impact joint stability, which, in turn, may adversely affect patient function after TKA. </span><b><span style="font-family:Verdana;">Methods:</span></b><span style="font-family:Verdana;"> A simulation-enhanced ISPT (SEISPT) that provides insights relating to postoperative active joint mechanics was developed. This involved four steps: 1) validation of a multi-body musculoskeletal model;2) optimization of the validated model;3) use of the validated and optimized model to derive knee performance equations (KPEs), which are equations that relate implant component characteristics to implant component biomechanical responses;and 4) optimization of the KPEs with respect to these responses. In a proof-of-concept study, KPEs that involved two</span></span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">com</span><span style="font-family:Verdana;">- </span><span style="font-family:;" "=""><span style="font-family:Verdana;">ponent biomechanical responses that have been shown to strongly correlate with poor proprioception (a common patient complaint post-TKA) were used to calculate optimal positions and orientations of the femoral and tibial components in the TKA design implanted in one subject (as reported in a publicly-available dataset). </span><b><span style="font-family:Verdana;">Results:</span></b><span style="font-family:Verdana;"> The differences between the calculated implant positions and orientations and the corresponding achieved values for the implant components in the subject were not similar to component position and orientation errors reported in biomechanical literature studies involving Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> and MAKO</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;">. Also, we indicate how SEISPT could be incorporated into the surgical workflow of Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> with minimal disruption and increase in cost. </span><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"> SEISPT is a plausible alternative to current-gen</span></span><span style="font-family:Verdana;">- </span><span style="font-family:Verdana;">eration ISPTs.</span>展开更多
Parallel robots with SCARA（selective compliance assembly robot arm） motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parall...Parallel robots with SCARA（selective compliance assembly robot arm） motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parallelogram structures included by the robots as a link. As the established error model fails to reflect the error feature of the parallelogram structures, the effect of accuracy design and kinematic calibration based on the error model come to be undermined. An error modeling methodology is proposed to establish an error model of parallel robots with parallelogram structures. The error model can embody the geometric errors of all joints, including the joints of parallelogram structures. Thus it can contain more exhaustively the factors that reduce the accuracy of the robot. Based on the error model and some sensitivity indices defined in the sense of statistics, sensitivity analysis is carried out. Accordingly, some atlases are depicted to express each geometric error’s influence on the moving platform’s pose errors. From these atlases, the geometric errors that have greater impact on the accuracy of the moving platform are identified, and some sensitive areas where the pose errors of the moving platform are extremely sensitive to the geometric errors are also figured out. By taking into account the error factors which are generally neglected in all existing modeling methods, the proposed modeling method can thoroughly disclose the process of error transmission and enhance the efficacy of accuracy design and calibration.展开更多
基金supported by Foundation of key Laboratory of AI and Information Processing of Education Department of Guangxi(No.2022GXZDSY002)(Hechi University),Foundation of Guangxi Key Laboratory of Automobile Components and Vehicle Technology(Nos.2022GKLACVTKF04,2023GKLACVTZZ06)。
文摘An improved RRT∗algorithm,referred to as the AGP-RRT∗algorithm,is proposed to address the problems of poor directionality,long generated paths,and slow convergence speed in multi-axis robotic arm path planning.First,an adaptive biased probabilistic sampling strategy is adopted to dynamically adjust the target deviation threshold and optimize the selection of random sampling points and the direction of generating new nodes in order to reduce the search space and improve the search efficiency.Second,a gravitationally adjustable step size strategy is used to guide the search process and dynamically adjust the step-size to accelerate the search speed of the algorithm.Finally,the planning path is processed by pruning,removing redundant points and path smoothing fitting using cubic B-spline curves to improve the flexibility of the robotic arm.Through the six-axis robotic arm path planning simulation experiments on the MATLAB platform,the results show that the AGP-RRT∗algorithm reduces 87.34%in terms of the average running time and 40.39%in terms of the average path cost;Meanwhile,under two sets of complex environments A and B,the average running time of the AGP-RRT∗algorithm is shortened by 94.56%vs.95.37%,and the average path cost is reduced by 55.28%vs.47.82%,which proves the effectiveness of the AGP-RRT∗algorithm in improving the efficiency of multi-axis robotic arm path planning.
文摘The burgeoning robotics industry has catalyzed significant strides in the development and deployment of industrial and service robotic arms, positioning path planning as a pivotal facet for augmenting their operational safety and efficiency. Existing path planning algorithms, while capable of delineating feasible trajectories, often fall short of achieving optimality, particularly concerning path length, search duration, and success likelihood. This study introduces an enhanced Rapidly-Exploring Random Tree (RRT) algorithm, meticulously designed to rectify the issues of node redundancy and the compromised path quality endemic to conventional RRT approaches. Through the integration of an adaptive pruning mechanism and a dynamic elliptical search strategy within the Informed RRT* framework, our algorithm efficiently refines the search tree by discarding branches that surpass the cost of the optimal path, thereby refining the search space and significantly boosting efficiency. Extensive comparative analysis across both two-dimensional and three-dimensional simulation settings underscores the algorithm’s proficiency in markedly improving path precision and search velocity, signifying a breakthrough in the domain of robotic arm path planning.
基金supported by the National Natural Science Foundation of China(62103039,62073030)the Scientific and Technological Innovation Foundation of Shunde Graduate School+8 种基金University of Science and Technology Beijing(USTB)(BK21BF003)the Korea Institute of Energy Technology Evaluation and Planning through the Auspices of the Ministry of TradeIndustry and EnergyRepublic of Korea(20213030020160)the Science and Technology Planning Project of Guangzhou City(202102010398,202201010758)the Guangzhou University-Hong Kong University of Science and Technology Joint Research Collaboration Fund(YH202205)Beijing Top Discipline for Artificial Intelligent Science and EngineeringUniversity of Science and Technology Beijing。
文摘This paper presents a dynamic model and performance constraint control of a line-driven soft robotic arm.The dynamics model of the soft robotic arm is established by combining the screw theory and the Cosserat theory.The unmodeled dynamics of the system are considered,and an adaptive neural network controller is designed using the backstepping method and radial basis function neural network.The stability of the closed-loop system and the boundedness of the tracking error are verified using Lyapunov theory.The simulation results show that our approach is a good solution to the motion constraint problem of the line-driven soft robotic arm.
基金supported by UGC Sponsored UPE-ⅡProject in Cognitive Science of Jadavpur University,Kolkata
文摘The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.
文摘The development of artificial intelligence technology has promoted the rapid improvement of human-computer interaction. This system uses the Kinect visual image sensor to identify human bone data and complete the recognition of the operator’s movements. Through the filtering process of real-time data by the host computer platform with computer software as the core, the algorithm is programmed to realize the conversion from data to control signals. The system transmits the signal to the lower computer platform with Arduino as the core through the transmission mode of the serial communication, thereby completing the control of the steering gear. In order to verify the feasibility of the theory, the team built a 4-DOF robotic arm control system and completed software development. It can display other functions such as the current bone angle and motion status in real time on the computer operation interface. The experimental data shows that the Kinect-based motion recognition method can effectively complete the tracking of the expected motion and complete the grasping and transfer of the specified objects, which has extremely high operability.
基金This work was supported by the International Partnership Program of Chinese Academy of Sciences(173321KYSB20180020,173321KYSB20200002)the National Natural Science Foundation of China(61903357,62022088)+3 种基金Liaoning Provincial Natural Science Foundation of China(2020-MS-032,2019-YQ-09,2020JH2/10500002,2021JH6/10500114)LiaoNing Revitalization Talents Program(XLYC1902110)China Postdoctoral Science Foundation(2020M672600)the Swedish Foundation for Strategic Research(APR20-0023).
文摘Reliable and accurate calibration for camera,inertial measurement unit(IMU)and robot is a critical prerequisite for visual-inertial based robot pose estimation and surrounding environment perception.However,traditional calibrations suffer inaccuracy and inconsistency.To address these problems,this paper proposes a monocular visual-inertial and robotic-arm calibration in a unifying framework.In our method,the spatial relationship is geometrically correlated between the sensing units and robotic arm.The decoupled estimations on rotation and translation could reduce the coupled errors during the optimization.Additionally,the robotic calibration moving trajectory has been designed in a spiral pattern that enables full excitations on 6 DOF motions repeatably and consistently.The calibration has been evaluated on our developed platform.In the experiments,the calibration achieves the accuracy with rotation and translation RMSEs less than 0.7°and 0.01 m,respectively.The comparisons with state-of-the-art results prove our calibration consistency,accuracy and effectiveness.
基金National Natural Science Foundation of China(No.61663022)Department of Education Project of Gansu Province(No.18JR3RA105)。
文摘In order to improve the control performance of industrial robotic arms,an efficient fractional-order iterative sliding mode control method is proposed by combining fractional calculus theory with iterative learning control and sliding mode control.In the design process of the controller,fractional approaching law and fractional sliding mode control theories are used to introduce fractional calculus into iterative sliding mode control,and Lyapunov theory is used to analyze the system stability.Then taking a two-joint robotic arm as an example,the proposed control strategy is verified by MATLAB simulation.The simulation experiments show that the fractional-order iterative sliding mode control strategy can effectively improve the tracking speed and tracking accuracy of the joint,reduce the tracking error,have strong robustness and effectively suppress the chattering phenomenon of sliding mode control.
文摘In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on industrial production lines to improve the security and reliability of robot control systems. This paper designs and implements a robot control system based Snort-BASE for real-time online detection of DoS attacks. The system uses a six-degree-of-freedom robotic arm as an example, uses Snort to record the network communication data of the robot arm control system in real time, and filters the network traffic through self-defined rules, and then uses the BASE analysis platform to achieve security analysis of the network traffic. The solution verifies the effectiveness of online real-time detection of attacks and visualisation of attack records by designing simulated robotic arm and real robotic arm attack experiments respectively, thus achieving the security of network communication of the robot remote control system.
文摘The precise control upon each degree of freedom of a robotic arm is a great challenge in implementing industrial work. This paper aims to design a novel controller for an automated robotic arm. A discrete Proportional Integral Derivative (PID) control technique is being used to replace the complex electronic circuitry, which would greatly reduce the cost and size of the controller. DC motors will be controlled on the basis of Closed-loop System using an avr (Atmega 16/32) microcontroller. Transfer functions have been derived for mathematical modeling of the system through which the stability of the system can be evaluated prior to fabrication.
文摘In the development of the robotic arm in recent decades, it has been realized to operate the robotic arm according to the design of the software program to complete the corresponding specific work. It can not only work in an environment where people can't work, but also can maintain long hours of the work, with the low failure rate. With the rapid development of the robotic arm research technology, the robotic arm has been widely used in aerospace, medicine, industrial production, anti-terrorism, and explosion and service industries. Due to the strict quality restriction, the rigidity of the robotic arm is low, and there are geometric errors and flexible deformation errors. In order to improve its performances, it is necessary to reduce the end positioning error of the robotic arm by means of the restructuring technology.
文摘This paper presents an algorithmic proposal of a movements＇ planner for a robotic manipulator. Its application is the planning of trajectories from wooden cuttings in a band saw. This algorithm is based on heuristics. A simulator was developed in order to allow the user to define the table＇s shape and figure that you want to trim. The simulator was developed in Java from Sun Microsystems, and next it will be applied in TM Cyberbotics Webots.
文摘Objective: To compare the effectiveness and safety of two surgical methods for lumbar degenerative diseases;the combination of the concept of accelerated rehabilitation with the assistance of Tianji Robotics and the concept of accelerated rehabilitation combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. Methods: A retrospective analysis was performed on 70 patients who received the concept of accelerated rehabilitation combined with spinal surgery for lumbar degenerative diseases in Baise People’s Hospital from January 2022 to January 2024. Among them, 35 patients in the robot group received accelerated rehabilitation concept combined with robot-assisted surgery;In the conventional C-arm group, 35 patients received the accelerated rehabilitation concept combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. VAS score (preoperative/postoperative), ODI score (preoperative/postoperative), intraoperative bleeding volume, postoperative hospital stay, postoperative complications and the accuracy rate of screw placement were compared between the two groups. Result: There was no statistically significant difference in preoperative VAS scores between the robot group and the conventional C-arm group (6.45 ± 0.82 VS 6.63 ± 0.81, P = 0.6600). The postoperative VAS score of the robot group was better than that of the conventional C-arm group (1.69 ± 0.80 VS 2.45 ± 0.85, P = 0.0000*). There was no statistically significant difference in preoperative ODI scores between the robot group and the conventional C-arm group (32.11 ± 3.18 VS 31.66 ± 2.25, P = 0.4900). The postoperative ODI score of the robot group was better than that of the conventional C-arm group (22.68 ± 1.94 VS 24.57 ± 2.25, P = 0.0000*). The postoperative complications in the robot group were less than those in the conventional C-arm group (2.7778% VS 28.5724%, P = 0.0030*). The intraoperative bleeding in the robot group was lower than that in the conventional C-arm group (320.85 ± 276.28 VS 490.00 ± 395.34, P = 0.0420*). The postoperative hospital stay of the robot group was shorter than that of the conventional C-arm group (10.00 ± 9.32 VS 14.49 ± 7.55, P = 0.0300*). The screw placement inaccuracy score of the robot group was lower than that of the conventional C-arm group (0.17 ± 0.51 VS 1.45 ± 1.46, P = 0.0000*). Conclusion: The combination of the concept of accelerated rehabilitation and Tianji Orthopedic robot-assisted surgery is more effective and safer in posterior lumbar decompression and internal fixation surgery with a screw rod system, and is worthy of promotion and application.
文摘A description of the design stage and results of the development of the conceptual structure of a robotic prosthesis arm is given.As a result,a prototype of man-made smart prosthesis on a 3D printer as well as a foundation for computational intelligence presented.The application of soft computing technology(the first step of IT)allows to extract knowledge directly from the physical signal of the electroencephalogram,as well as to form knowledge-based intelligent robust control of the lower performing level taking into account the assessment of the patient’s emotional state.The possibilities of applying quantum soft computing technologies(the second step of IT)in the processes of robust filtering of electroencephalogram signals for the formation of mental commands of robotic prosthetic arm discussed.Quantum supremacy benchmark of intelligent control simulation demonstrated.
文摘<strong>Background:</strong><span style="font-family:;" "=""><span style="font-family:Verdana;"> Intraoperative surgical planning tools (ISPTs) used in current-generation robotic arm-assisted total knee arthroplasty (RTKA) systems (such as Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> and MAKO</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;">) involve employment of postoperative passive joint balancing. This results in improper ligament tension, which may negatively impact joint stability, which, in turn, may adversely affect patient function after TKA. </span><b><span style="font-family:Verdana;">Methods:</span></b><span style="font-family:Verdana;"> A simulation-enhanced ISPT (SEISPT) that provides insights relating to postoperative active joint mechanics was developed. This involved four steps: 1) validation of a multi-body musculoskeletal model;2) optimization of the validated model;3) use of the validated and optimized model to derive knee performance equations (KPEs), which are equations that relate implant component characteristics to implant component biomechanical responses;and 4) optimization of the KPEs with respect to these responses. In a proof-of-concept study, KPEs that involved two</span></span><span style="font-family:Verdana;"> </span><span style="font-family:Verdana;">com</span><span style="font-family:Verdana;">- </span><span style="font-family:;" "=""><span style="font-family:Verdana;">ponent biomechanical responses that have been shown to strongly correlate with poor proprioception (a common patient complaint post-TKA) were used to calculate optimal positions and orientations of the femoral and tibial components in the TKA design implanted in one subject (as reported in a publicly-available dataset). </span><b><span style="font-family:Verdana;">Results:</span></b><span style="font-family:Verdana;"> The differences between the calculated implant positions and orientations and the corresponding achieved values for the implant components in the subject were not similar to component position and orientation errors reported in biomechanical literature studies involving Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> and MAKO</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;">. Also, we indicate how SEISPT could be incorporated into the surgical workflow of Navio</span><sup><span style="font-size:12px;font-family:Verdana;"><span lang="ZH-CN" style="font-size:12pt;font-family:宋体;">®</span></span></sup><span style="font-family:Verdana;"> with minimal disruption and increase in cost. </span><b><span style="font-family:Verdana;">Conclusion:</span></b><span style="font-family:Verdana;"> SEISPT is a plausible alternative to current-gen</span></span><span style="font-family:Verdana;">- </span><span style="font-family:Verdana;">eration ISPTs.</span>
基金Supported by National Natural Science Foundation of China(Grant No.51305222)National Key Scientific and Technological Program of China(Grant No.2013ZX04001-021)
文摘Parallel robots with SCARA（selective compliance assembly robot arm） motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parallelogram structures included by the robots as a link. As the established error model fails to reflect the error feature of the parallelogram structures, the effect of accuracy design and kinematic calibration based on the error model come to be undermined. An error modeling methodology is proposed to establish an error model of parallel robots with parallelogram structures. The error model can embody the geometric errors of all joints, including the joints of parallelogram structures. Thus it can contain more exhaustively the factors that reduce the accuracy of the robot. Based on the error model and some sensitivity indices defined in the sense of statistics, sensitivity analysis is carried out. Accordingly, some atlases are depicted to express each geometric error’s influence on the moving platform’s pose errors. From these atlases, the geometric errors that have greater impact on the accuracy of the moving platform are identified, and some sensitive areas where the pose errors of the moving platform are extremely sensitive to the geometric errors are also figured out. By taking into account the error factors which are generally neglected in all existing modeling methods, the proposed modeling method can thoroughly disclose the process of error transmission and enhance the efficacy of accuracy design and calibration.
