The existing research on dynamics and slip ratio of wheeled mobile robot （WMR） are derived without considering the effect of height, and the existing models can not be used to analyze the dynamics performance of the...The existing research on dynamics and slip ratio of wheeled mobile robot （WMR） are derived without considering the effect of height, and the existing models can not be used to analyze the dynamics performance of the robot with variable height while moving such as NOROS- Ⅱ. The existing method of dynamics modeling is improved by adding the constraint equation between perpendicular displacement of body and horizontal displacement of wheel into the constraint conditions. The dynamic model of NOROS- Ⅱ in wheel motion is built by the Lagrange method under nonholonomic constraints. The inverse dynamics is calculated in three different paths based on this model, and the results demonstrate that torques of hip pitching joints are inversely proportional to the height of robot. The relative error of calculated torques is less than 2% compared with that of ADAMS simulation, by which the validity of dynamic model is verified, Moreover, the relative horizontal motion between fore/hind wheels and body is produced when the height is changed, and thus the accurate slip ratio can not be obtained by the traditional equation. The improved slip ratio equations with the parameter of the vertical velocity of body are introduced for fore wheels and hind wheels respectively. Numerical simulations of slip ratios are conducted to reveal the effect of varied height on slip ratios of different wheels. The result shows that the slip ratios of fore/hind wheels become larger/smaller respectively as the height increases, and as the height is reduced, the reverse applies. The proposed research of dynamic model and slip ratio based on the robot height provides the effective method to analyze the dynamics of WMRs with varying height.展开更多
The identification of maximum road friction coefficient and optimal slip ratio is crucial to vehicle dynamics and control.However,it is always not easy to identify the maximum road friction coefficient with high robus...The identification of maximum road friction coefficient and optimal slip ratio is crucial to vehicle dynamics and control.However,it is always not easy to identify the maximum road friction coefficient with high robustness and good adaptability to various vehicle operating conditions.The existing investigations on robust identification of maximum road friction coefficient are unsatisfactory.In this paper,an identification approach based on road type recognition is proposed for the robust identification of maximum road friction coefficient and optimal slip ratio.The instantaneous road friction coefficient is estimated through the recursive least square with a forgetting factor method based on the single wheel model,and the estimated road friction coefficient and slip ratio are grouped in a set of samples in a small time interval before the current time,which are updated with time progressing.The current road type is recognized by comparing the samples of the estimated road friction coefficient with the standard road friction coefficient of each typical road,and the minimum statistical error is used as the recognition principle to improve identification robustness.Once the road type is recognized,the maximum road friction coefficient and optimal slip ratio are determined.The numerical simulation tests are conducted on two typical road friction conditions（single-friction and joint-friction）by using CarSim software.The test results show that there is little identification error between the identified maximum road friction coefficient and the pre-set value in CarSim.The proposed identification method has good robustness performance to external disturbances and good adaptability to various vehicle operating conditions and road variations,and the identification results can be used for the adjustment of vehicle active safety control strategies.展开更多
The independent driving wheel system, which is composed of in-wheel permanent magnet synchronous motor（I-PMSM） and tire, is more convenient to estimate the slip ratio because the rotary speed of the rotor can be acc...The independent driving wheel system, which is composed of in-wheel permanent magnet synchronous motor（I-PMSM） and tire, is more convenient to estimate the slip ratio because the rotary speed of the rotor can be accurately measured. However, the ring speed of the tire ring doesn’t equal to the rotor speed considering the tire deformation. For this reason, a deformable tire and a detailed I-PMSM are modeled by using Matlab/Simulink. Moreover, the tire/road contact interface（a slippery road） is accurately described by the non-linear relaxation length-based model and the Magic Formula pragmatic model. Based on the relatively accurate model, the error of slip ratio estimated by the rotor rotary speed is analyzed in both time and frequency domains when a quarter car is started by the I-PMSM with a definite target torque input curve. In addition, the natural frequencies（NFs） of the driving wheel system with variable parameters are illustrated to present the relationship between the slip ratio estimation error and the NF. According to this relationship, a low-pass filter, whose cut-off frequency corresponds to the NF, is proposed to eliminate the error in the estimated slip ratio. The analysis, concerning the effect of the driving wheel parameters and road conditions on slip ratio estimation, shows that the peak estimation error can be reduced up to 75% when the LPF is adopted. The robustness and effectiveness of the LPF are therefore validated. This paper builds up the deformable tire model and the detailed I-PMSM models, and analyzes the effect of the driving wheel parameters and road conditions on slip ratio estimation.展开更多
Due to quick response and large quantity of electric motor torque,the traction wheels of battery electric vehicle are easy to slip during the initial phase of starting.In this paper,a sliding mode control approach of ...Due to quick response and large quantity of electric motor torque,the traction wheels of battery electric vehicle are easy to slip during the initial phase of starting.In this paper,a sliding mode control approach of acceleration slip regulation is designed to prevent the slip of the traction wheels.The wheel slip ratio is used as the state variable for the formulation of system dynamics model.The fuzzy algorithm is utilized to adjust the switch function of sliding mode controller.After stability and robustness analysis,the sliding mode control law is transferred into C code and downloaded into vehicle control unit,which is validated under wet and dry road conditions.The experimental results with a small overshoot and a quick response during starting indicate that the sliding mode controller has good control efect on the slip ratio regulation.This article proposes an acceleration slip regulation method that improves the safety during acceleration for battery electric vehicle.展开更多
航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分...航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分析模型,对外圈带ERSFD的圆柱滚子轴承保持架振动特性和打滑率进行研究。研究结果表明:与未装配ERSFD的圆柱滚子轴承相比,ERSFD可以提高圆柱滚子轴承保持架的稳定性。过大或过小的弹性环凸台数量与宽度都不利于圆柱滚子轴承保持架的稳定性,需要选择合适的凸台数量和宽度。径向载荷与转速对带弹性环的圆柱滚子轴承保持架稳定性影响显著,保持架涡动频率的谐波次数随着径向载荷的增加而减少,其对应的幅值也减小;保持架涡动频率的谐波次数随着转速的增加而增加,其对应幅值也增加。展开更多
In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sink...In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sinkage of three types of wheels in dimension with wheel lugs of different heights and numbers under a series of slip ratios (0-0.6). The curves of wheel sinkage versus slip ratio were obtained and it was found that the sinkage with slip ratio of 0.6 is 3-7 times of the static sinkage. Based on the experimental results, the slip-sinkage principle of lunar's rover lugged wheels (including the sinkage caused by longitudinal flow and side flow of soil, and soil digging of wheel lugs) was analyzed, and corresponding calculation equations were derived. All the factors that can cause slip sinkage were considered to improve the conventional wheel-soil interaction model, and a formula of changing the sinkage exponent with the slip ratio was established. Mathematical model for calculating the sinkage of wheel according to vertical load and slip ratio was developed. Calculation results show that this model can predict the slip-sinkage of wheel with high precision, making up the deficiency of Wong-Reece model that mainly reflects longitudinal slip-sinkage.展开更多
The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recover...The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recovery.There remain technical challenges mainly because of the nonlinear,uncertain,and varying features of wheel-rail contact conditions.This research analyzes the torque transmitting behavior during regenerative braking,and proposes a novel methodology to detect the wheel-rail adhesion stability.Then,applications to the wheel slip prevention during braking are investigated,and the optimal slip ratio control scheme is proposed,which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control.The proposed methodology achieves the optimal braking performancewithoutthewheel-railcontactinformation.Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.展开更多
基金supported by National Outstanding Youth Science Foundation of China (Grant No. 51125020)National Hi-tech Research and Development Program of China (863 Program, Grant No. 2006AA04Z207)Program for New Century Excellent Talents in University, China
文摘The existing research on dynamics and slip ratio of wheeled mobile robot （WMR） are derived without considering the effect of height, and the existing models can not be used to analyze the dynamics performance of the robot with variable height while moving such as NOROS- Ⅱ. The existing method of dynamics modeling is improved by adding the constraint equation between perpendicular displacement of body and horizontal displacement of wheel into the constraint conditions. The dynamic model of NOROS- Ⅱ in wheel motion is built by the Lagrange method under nonholonomic constraints. The inverse dynamics is calculated in three different paths based on this model, and the results demonstrate that torques of hip pitching joints are inversely proportional to the height of robot. The relative error of calculated torques is less than 2% compared with that of ADAMS simulation, by which the validity of dynamic model is verified, Moreover, the relative horizontal motion between fore/hind wheels and body is produced when the height is changed, and thus the accurate slip ratio can not be obtained by the traditional equation. The improved slip ratio equations with the parameter of the vertical velocity of body are introduced for fore wheels and hind wheels respectively. Numerical simulations of slip ratios are conducted to reveal the effect of varied height on slip ratios of different wheels. The result shows that the slip ratios of fore/hind wheels become larger/smaller respectively as the height increases, and as the height is reduced, the reverse applies. The proposed research of dynamic model and slip ratio based on the robot height provides the effective method to analyze the dynamics of WMRs with varying height.
基金Supported by National Hi-tech Research and Development Program of China(863 Program,Grant No.2006AA110101)
文摘The identification of maximum road friction coefficient and optimal slip ratio is crucial to vehicle dynamics and control.However,it is always not easy to identify the maximum road friction coefficient with high robustness and good adaptability to various vehicle operating conditions.The existing investigations on robust identification of maximum road friction coefficient are unsatisfactory.In this paper,an identification approach based on road type recognition is proposed for the robust identification of maximum road friction coefficient and optimal slip ratio.The instantaneous road friction coefficient is estimated through the recursive least square with a forgetting factor method based on the single wheel model,and the estimated road friction coefficient and slip ratio are grouped in a set of samples in a small time interval before the current time,which are updated with time progressing.The current road type is recognized by comparing the samples of the estimated road friction coefficient with the standard road friction coefficient of each typical road,and the minimum statistical error is used as the recognition principle to improve identification robustness.Once the road type is recognized,the maximum road friction coefficient and optimal slip ratio are determined.The numerical simulation tests are conducted on two typical road friction conditions（single-friction and joint-friction）by using CarSim software.The test results show that there is little identification error between the identified maximum road friction coefficient and the pre-set value in CarSim.The proposed identification method has good robustness performance to external disturbances and good adaptability to various vehicle operating conditions and road variations,and the identification results can be used for the adjustment of vehicle active safety control strategies.
基金Supported by National Natural Science Foundation of China (Grant Nos.51275264,51275265)National Hi-tech Research and Development Program of China (Grant No.2012DFA81190)
文摘The independent driving wheel system, which is composed of in-wheel permanent magnet synchronous motor（I-PMSM） and tire, is more convenient to estimate the slip ratio because the rotary speed of the rotor can be accurately measured. However, the ring speed of the tire ring doesn’t equal to the rotor speed considering the tire deformation. For this reason, a deformable tire and a detailed I-PMSM are modeled by using Matlab/Simulink. Moreover, the tire/road contact interface（a slippery road） is accurately described by the non-linear relaxation length-based model and the Magic Formula pragmatic model. Based on the relatively accurate model, the error of slip ratio estimated by the rotor rotary speed is analyzed in both time and frequency domains when a quarter car is started by the I-PMSM with a definite target torque input curve. In addition, the natural frequencies（NFs） of the driving wheel system with variable parameters are illustrated to present the relationship between the slip ratio estimation error and the NF. According to this relationship, a low-pass filter, whose cut-off frequency corresponds to the NF, is proposed to eliminate the error in the estimated slip ratio. The analysis, concerning the effect of the driving wheel parameters and road conditions on slip ratio estimation, shows that the peak estimation error can be reduced up to 75% when the LPF is adopted. The robustness and effectiveness of the LPF are therefore validated. This paper builds up the deformable tire model and the detailed I-PMSM models, and analyzes the effect of the driving wheel parameters and road conditions on slip ratio estimation.
基金Supported by Key Research and Development Program of Jiangsu Province of China(Grant No.BE2021006-2)University Synergy Innovation Program of Anhui Province of China(Grant No.GXXT-2020-076)Innovation Project of New Energy Vehicle and Intelligent Connected Vehicle of Anhui Province of China,and Foundation of State Key Laboratory of Automotive Simulation and Control of China(Grant No.20201107).
文摘Due to quick response and large quantity of electric motor torque,the traction wheels of battery electric vehicle are easy to slip during the initial phase of starting.In this paper,a sliding mode control approach of acceleration slip regulation is designed to prevent the slip of the traction wheels.The wheel slip ratio is used as the state variable for the formulation of system dynamics model.The fuzzy algorithm is utilized to adjust the switch function of sliding mode controller.After stability and robustness analysis,the sliding mode control law is transferred into C code and downloaded into vehicle control unit,which is validated under wet and dry road conditions.The experimental results with a small overshoot and a quick response during starting indicate that the sliding mode controller has good control efect on the slip ratio regulation.This article proposes an acceleration slip regulation method that improves the safety during acceleration for battery electric vehicle.
文摘航空发动机主轴中滚动轴承为了降低系统振动经常与弹性环式挤压油膜阻尼器(elastic ring squeeze film damper, ERSFD)联合使用。基于滚动轴承动力学理论和流体力学控制方程,采用变步长积分算法建立圆柱滚子轴承与ERSFD耦合的动力学分析模型,对外圈带ERSFD的圆柱滚子轴承保持架振动特性和打滑率进行研究。研究结果表明:与未装配ERSFD的圆柱滚子轴承相比,ERSFD可以提高圆柱滚子轴承保持架的稳定性。过大或过小的弹性环凸台数量与宽度都不利于圆柱滚子轴承保持架的稳定性,需要选择合适的凸台数量和宽度。径向载荷与转速对带弹性环的圆柱滚子轴承保持架稳定性影响显著,保持架涡动频率的谐波次数随着径向载荷的增加而减少,其对应的幅值也减小;保持架涡动频率的谐波次数随着转速的增加而增加,其对应幅值也增加。
基金Project(50975059) supported by the National Natural Science Foundation of ChinaProject(2006AA04Z231) supported by the National High-Tech Research and Development Program of China+2 种基金Project(ZJG0709) supported by Key Natural Science Foundation of Heilongjiang Province of ChinaProject(B07018) supported by the Program of Introducing Talents of Discipline to UniversityProject (SKLRS200801A02) supported by Chinese State Key Laboratory of Robotics and System Foundation
文摘In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sinkage of three types of wheels in dimension with wheel lugs of different heights and numbers under a series of slip ratios (0-0.6). The curves of wheel sinkage versus slip ratio were obtained and it was found that the sinkage with slip ratio of 0.6 is 3-7 times of the static sinkage. Based on the experimental results, the slip-sinkage principle of lunar's rover lugged wheels (including the sinkage caused by longitudinal flow and side flow of soil, and soil digging of wheel lugs) was analyzed, and corresponding calculation equations were derived. All the factors that can cause slip sinkage were considered to improve the conventional wheel-soil interaction model, and a formula of changing the sinkage exponent with the slip ratio was established. Mathematical model for calculating the sinkage of wheel according to vertical load and slip ratio was developed. Calculation results show that this model can predict the slip-sinkage of wheel with high precision, making up the deficiency of Wong-Reece model that mainly reflects longitudinal slip-sinkage.
基金supported by the National Natural Science Foundation of China(Grant 51305437)Guangdong Innovative Research Team Program of China(Grant201001D0104648280)
文摘The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recovery.There remain technical challenges mainly because of the nonlinear,uncertain,and varying features of wheel-rail contact conditions.This research analyzes the torque transmitting behavior during regenerative braking,and proposes a novel methodology to detect the wheel-rail adhesion stability.Then,applications to the wheel slip prevention during braking are investigated,and the optimal slip ratio control scheme is proposed,which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control.The proposed methodology achieves the optimal braking performancewithoutthewheel-railcontactinformation.Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.
