In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the ...In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.展开更多
The target of the National Solar Mission is to build up India as a worldwide pioneer in solar energy generation. Solar power can be transmitted through grid either from solar photovoltaic or solar thermal technology. ...The target of the National Solar Mission is to build up India as a worldwide pioneer in solar energy generation. Solar power can be transmitted through grid either from solar photovoltaic or solar thermal technology. As compared to solar photovoltaic, solar thermal installations are less studied, especially regarding energy estimation and performance analysis. For estimating the potential of CSP plants, it is planned to simulate a power plant. We have marginally modified the design of 1 MW operational power plant installed at Gurgaon using Parabolic Trough Collector (PTC) technology. The results are compared with the expected output of Gurgaon power plant and also 50 MW power plant at Rajasthan. Our results have closely matched with a small deviation of 3.1% and 3.6% for Gurgaon and Rajasthan plants, respectively. Our developed model is also validated with 18 different solar power plants in different parts of the world by slightly modifying the parameters according to the plant capacity without changing major changes to the plant design. Difference between our results and the expected energy generation varied from 0.4% to 13.7% with an average deviation of 6.8%. As our results show less than 10% deviation as compared to the actual generation, an attempt has been made here to estimate the potential for the entire nation. For this modelling has been carried out for every grid station of 0.25° × 0.25° interval in India. Our results show that annual solar thermal power plant of 1 MW<sub>e</sub> capacity potential varies from 900 to 2700 MWh. We have also compared our results with previous studies and discussed.展开更多
In order to improve the thermal shock resistance of solar thermal heat transfer tube material, the mullite-cordierite composite ceramic as solar thermal heat transfer tube material were fabricated by pressureless sint...In order to improve the thermal shock resistance of solar thermal heat transfer tube material, the mullite-cordierite composite ceramic as solar thermal heat transfer tube material were fabricated by pressureless sintering using α-Al2O3 , Suzhou kaolin, talc, and feldspar as starting materials. The important parameter for solar thermal transfer tube such as water absorption (Wa ), bulk density (Db ), and the mechanical properties were investigated. The phase composition and microstructure of the composite ceramics were analyzed by XRD and SEM. The experimental results show that the B3 sintered at 1 300 ℃ and holding for 3 h has an optimum thermal shock resistance. The bending strength loss rate of B3 is only 2% at 1 100℃ by air quenching-strength test and the sample can endure 30 times thermal shock cycling, and the water absorption, the bulk density and the bending strength are 0.32%, 2.58 g·cm-3 , and 125.59 MPa respectively. The XRD analysis indicated that the phase compositions of the sample were mullite, cordierite, corundum, and spinel. The SEM images illustrate that the cordierite is prismatic grain and the mullite is nano rod, showing a good thermal shock resistance for composite ceramics as potential solar thermal power material.展开更多
Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid a...Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid area,natural draft dry cooling tower is a promising choice.To develop the experimental studies on small cooling tower,a 20 m high natural draft dry cooling tower with fully instrumented measurement system was established by the Queensland Geothermal Energy Centre of Excellence.The performance of this cooling tower was measured with the constant heat input of 600 kW and 840 kW and with ambient temperature ranging from 20 ℃ to 32 ℃.The cooling tower numerical model was refined and validated with the experimental data.The model of 1 MW concentrating solar thermal supercritical CO2 power cycle was developed and integrated with the cooling tower model.The influences of changing ambient temperature and the performance of the cooling tower on efficiency of the power system were simulated.The differences of the mechanism of the ambient temperature effect on Rankine cycle and supercritical CO2 Brayton cycle were analysed and discussed.展开更多
The Al2O3-ZrO2(3Y)-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of...The Al2O3-ZrO2(3Y)-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of samples with 10vol% nano-ZrO2 sintered at 1480℃ were 3.222 g/cm3 and 160.4MPa,respectively.The bending strength of samples after 7 times thermal shock tests (quenching from 1000℃ to 25℃ in air medium) is 132.0MPa,loss rate of bending strength is only 17%.The effect of nano-ZrO2 content on the microstructure and performance of Al2O3-ZrO2(3Y)-SiC composite ceramic was investigated.The experimental results show that the bending strength of samples with above 10vol% nano-ZrO2 content has decreased,because the volume expansion resulting from t-ZrO2 to m-ZrO2 phase transformation is excessive;Adding proper nano-ZrO2 would be contributed to improve the thermal shock resistance of the composite ceramics.The Al2O3-ZrO2(3Y)-SiC composite ceramic has promising potential application in solar thermal power.展开更多
High-temperature thermal storage material is one of the critical materials of solar thermal power generation system. Andalusite, kaolin, talc, γ-Al 2 O 3 and partially stabilized zirconia were used as the raw materia...High-temperature thermal storage material is one of the critical materials of solar thermal power generation system. Andalusite, kaolin, talc, γ-Al 2 O 3 and partially stabilized zirconia were used as the raw materials, and in-situ synthesis of cordierite was adopted to fabricate thermal storage material for solar thermal power generation via pressureless sintering. The phase compositions, microstructures and thermal shock resistances of the sintered samples were analyzed by XRD, SEM and EDS, and the corresponding mechanical properties were measured. The results show that the major phases of the samples are mullite and zirconium silicate, and the pores distribute uniformly. After being sintered at 1 460 ℃, A4 sample exhibits a better mechanical performance and thermal shock resistance, its loss rate of bending strength after 30 cycles thermal shock is 3.04%, the bulk density and bending strength are 2.86 g·cm-3 and 139.66 MPa, respectively. The better thermal shock resistance of the sample is closely related to the effect of zirconium silicate, such as its uniform distribution, nested growth with mullite, low thermal expansion coeffi cient, high thermal conductivity, etc. This ceramic can be widely used as one of potential thermal storage materials of solar thermal power generation system.展开更多
During the calendar year of 2012 the University of Louisiana at Lafayette in conjunction with CLECO Power LLC (CLECO) has constructed and commissioned a pilot scale parabolic trough solar thermal power plant for the f...During the calendar year of 2012 the University of Louisiana at Lafayette in conjunction with CLECO Power LLC (CLECO) has constructed and commissioned a pilot scale parabolic trough solar thermal power plant for the first time in Louisiana. The large aperture trough (LAT) solar collectors were provided by Gossamer Space Frames and are coupled with an organic Rankine cycle (ORC) power block provided by ElectraTherm, Inc. for study of the feasibility of cost-effective commercial scale solar thermal power production in Louisiana. Supported by CLECO and providing power to the existing CLECO grid, the implementation of state-of-the-industry collector frames, mirrors, trackers, and ORC power block is studied under various local weather conditions which present varied operating regimes from existing solar thermal installations. The solar collectors provide a design output of 650 kWth and preliminary actual performance data from the system level is presented. The optimal size, configuration and location for such a plant in the given solar resource region are being studied in conjunction with CLECO’s search for optimal renewable energy solutions for the region. The pilot scale size of the facility and implementation of the simpler ORC allow remote operation of the facility and flexibility in operating parameters for optimization studies. The construction of the facility was supported by the Louisiana Department of Natural Resources, the U.S. Department of Energy, and CLECO. The continued operation of the plant is supported by CLECO Power LLC and the University of Louisiana at Lafayette.展开更多
To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surfa...To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surface solar collectors, so working at low temperature (i.e., below 100°C). This power plant is aimed at warm countries, i.e., the ones mainly located between -40° and 40° latitude, having available space along their coast. This land based plant, to install on the seashore, is technologically similar to the one used for OTEC (Ocean Thermal Energy Conversion). This plant, apart from supplying electricity with a much better thermodynamic efficiency than OTEC plants, has the main advantage of providing desalinated water for drinking and irrigation. This plant is designed to generate electricity (and desalinated water) night and day and all year round, by means of hot water storage, with just a variation of the power delivered depending on the season.展开更多
A novel solar polygeneration system for heat, power and fresh water production with absorption heat pump(AHP) and humidification-dehumidification(HDH) desalination system was proposed for high-efficiency utilization o...A novel solar polygeneration system for heat, power and fresh water production with absorption heat pump(AHP) and humidification-dehumidification(HDH) desalination system was proposed for high-efficiency utilization of solar energy. A case study of the proposed system was investigated based on 1 MW solar thermal power(STP) tower plant located in Beijing. Depending on mathematical modeling of the proposed system, corresponding modules were developed in TRNSYS. Meanwhile, control and operation strategies were fully studied with principal of solar energy cascade utilization. The thermodynamic performance of the proposed system was dynamically simulated at one minute intervals in a typical day. It was found that solar energy utilization level was improved with the help of solar thermal storage system and continuous heating in different operation modes met well with flexible heating loads from 93.76 kW to 169.49 kW. During AHP operation period, its Coefficient of Performance(COP) varied from 1.39 to 1.73 due to recoverable condensate heat restricted by heating demand. Meanwhile, fresh water production of HDH increased from 352.05 kg/h to 416.62 kg/h with Gained Output Ratio(GOR) increase from 2.48 to 2.67. Compared with original STP tower plant, maximum power generation efficiency was increased from 18.66% to 19.22% with power from 1169.69 kW to 1204.44 kW.展开更多
Brazil has a predominantly renewable energy matrix, with large participation of water resource in domestic supply of energy. Data from 2019 National Energy Balance show that renewable sources (water, biomass, wind and...Brazil has a predominantly renewable energy matrix, with large participation of water resource in domestic supply of energy. Data from 2019 National Energy Balance show that renewable sources (water, biomass, wind and solar photovoltaic) together represented 83% of domestic electric supply in 2018, where the remaining percentage (16.7%) represented non-renewable sources. The generation of electricity through thermal solar technology was not representative. However, it is known that Brazil presents high potential for the installation of solar thermal plants, especially in the Northeastern Region, where direct normal solar irradiation values are high. It is observed that the (high) costs of the projects associated to the absence of a specific incentive program make Concentrating Solar Power (CSP) plants installation more and more time consuming. As a way to contribute to the insertion of solar thermal energy in Brazil, this article presents a methodology for the location of parabolic trough solar thermal plants of 80 MW for the State of Bahia, located in the Northeastern Region of Brazil. Such methodology was based on the application the Analytic Hierarchy Process (AHP) method and the Geoprocessing Technologies to define potentially available sites for the implementation of the projects. For the analysis, parameters related to energy production in the solar power plant, electric, roadways and water infrastructure of the plant were taken into account, as well as the occupation, slopes and land use. Considering the analyses performed, it was confirmed that Bahia disposes of many sites with great generation potential, especially in the western region of the State (at Barreiras), where favorable conditions were found for the development of the technology. Localities situated in other region of the State were also confirmed as suitable, however with less site availability for the insertion of plants. Methodology validations were also carried out and indicated that the model reached the proposed objective, faithfully representing the real-world simplifications that were made.展开更多
A new small concentrating solar power plant which is suitable for urban area is presented, and a theoretical framework for the energy and exergy analysis in the overall power plant is also constructed. The framework c...A new small concentrating solar power plant which is suitable for urban area is presented, and a theoretical framework for the energy and exergy analysis in the overall power plant is also constructed. The framework can be used to evaluate the energy and exergy losses in each component. Furthermore, the energy and exergy efficiencies have also been computed and compared for the individual components as well as for the overall plant.展开更多
Radiation is a form of energy where the angular variable of the direction of its photons has a primary importance, particularly for radiation concentration processes, which are essential tools to reach high temperatur...Radiation is a form of energy where the angular variable of the direction of its photons has a primary importance, particularly for radiation concentration processes, which are essential tools to reach high temperatures from radiation beams (as the solar ones) with moderate intensities. Solar radiation cannot be used directly to feed thermodynamic cycles, and optical concentration must be applied to that goal. In general, reflection from mirrors is preferred to refraction by lenses in this case, because they have less optical aberrations. Concentration conveys very high temperatures in the receiver. However, the higher the temperature, the lower the efficiency of the solar thermal apparatus. Besides that, economy also suffers quite a lot when going to very high concentration factors, which is one of the main burdens in the development of Solar Thermal Energy. A new configuration of solar radiation concentrator is presented. It includes a salient innovation in the way the mirrors are given the right curvature by mechanical forces. Those mirrors are originally flat and do not need any special thermal treatment for this purpose. The whole device concept has been guided by the principle of thermoeconomic coherence, which requires similar efforts in all degrees of freedom that have strong influence in the performance and cost of the system. The paper shows the decision tree that has oriented the project, following the principle of equilibrium in efforts, which leads to a design window of moderate values in the main variables. The prototype of this new configuration has already been built, and the first stage of research is considered to be finished, because the prototype has shown excellent conditions to include selected (fitting) technologies at a very low cost.展开更多
Due to a higher operating temperature(≥800 ℃),Solar Particle Receiver(SPR)which uses particles as the working medium is considered as one of best candidates to improve the thermoelectric conversion efficiency of con...Due to a higher operating temperature(≥800 ℃),Solar Particle Receiver(SPR)which uses particles as the working medium is considered as one of best candidates to improve the thermoelectric conversion efficiency of concentrating solar power plants.In this paper,a quartz tube solid particle receiver model is fully developed by using the discretized lumped parameter method,in which the calculation process of particle temperature and thermal loss is clearly given.In order to improve the manipulation level of particle receiver during the operation,the dynamic characteristics of the quartz tube particle receiver are comprehensively studied by the disturbance test of selected input parameters.Besides,in order to grasp the influence rule of key parameters on the thermal performance of particle receiver,the key parameters'sensitivity analysis is also deeply studied.The results show that the particle outlet temperature can reach as high as 810 ℃ under a relatively small value of solar flux 600 kW/m^(2),but the receiver efficiency is only about 75%;Besides,the receiver efficiency shows a variation tendency that it rises first falls afterwards with the increase of incident solar flux.The validity of proposed model is verified by a heating experi-mental system with a single quartz tube,and the relative error is not more than 7.9%.The research results are beneficial for understanding the dynamic characteristics and designing the particle receiver.展开更多
文摘In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.
文摘The target of the National Solar Mission is to build up India as a worldwide pioneer in solar energy generation. Solar power can be transmitted through grid either from solar photovoltaic or solar thermal technology. As compared to solar photovoltaic, solar thermal installations are less studied, especially regarding energy estimation and performance analysis. For estimating the potential of CSP plants, it is planned to simulate a power plant. We have marginally modified the design of 1 MW operational power plant installed at Gurgaon using Parabolic Trough Collector (PTC) technology. The results are compared with the expected output of Gurgaon power plant and also 50 MW power plant at Rajasthan. Our results have closely matched with a small deviation of 3.1% and 3.6% for Gurgaon and Rajasthan plants, respectively. Our developed model is also validated with 18 different solar power plants in different parts of the world by slightly modifying the parameters according to the plant capacity without changing major changes to the plant design. Difference between our results and the expected energy generation varied from 0.4% to 13.7% with an average deviation of 6.8%. As our results show less than 10% deviation as compared to the actual generation, an attempt has been made here to estimate the potential for the entire nation. For this modelling has been carried out for every grid station of 0.25° × 0.25° interval in India. Our results show that annual solar thermal power plant of 1 MW<sub>e</sub> capacity potential varies from 900 to 2700 MWh. We have also compared our results with previous studies and discussed.
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2010CB227105)
文摘In order to improve the thermal shock resistance of solar thermal heat transfer tube material, the mullite-cordierite composite ceramic as solar thermal heat transfer tube material were fabricated by pressureless sintering using α-Al2O3 , Suzhou kaolin, talc, and feldspar as starting materials. The important parameter for solar thermal transfer tube such as water absorption (Wa ), bulk density (Db ), and the mechanical properties were investigated. The phase composition and microstructure of the composite ceramics were analyzed by XRD and SEM. The experimental results show that the B3 sintered at 1 300 ℃ and holding for 3 h has an optimum thermal shock resistance. The bending strength loss rate of B3 is only 2% at 1 100℃ by air quenching-strength test and the sample can endure 30 times thermal shock cycling, and the water absorption, the bulk density and the bending strength are 0.32%, 2.58 g·cm-3 , and 125.59 MPa respectively. The XRD analysis indicated that the phase compositions of the sample were mullite, cordierite, corundum, and spinel. The SEM images illustrate that the cordierite is prismatic grain and the mullite is nano rod, showing a good thermal shock resistance for composite ceramics as potential solar thermal power material.
文摘Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid area,natural draft dry cooling tower is a promising choice.To develop the experimental studies on small cooling tower,a 20 m high natural draft dry cooling tower with fully instrumented measurement system was established by the Queensland Geothermal Energy Centre of Excellence.The performance of this cooling tower was measured with the constant heat input of 600 kW and 840 kW and with ambient temperature ranging from 20 ℃ to 32 ℃.The cooling tower numerical model was refined and validated with the experimental data.The model of 1 MW concentrating solar thermal supercritical CO2 power cycle was developed and integrated with the cooling tower model.The influences of changing ambient temperature and the performance of the cooling tower on efficiency of the power system were simulated.The differences of the mechanism of the ambient temperature effect on Rankine cycle and supercritical CO2 Brayton cycle were analysed and discussed.
文摘The Al2O3-ZrO2(3Y)-SiC composite ceramics used in solar thermal power were prepared by micrometric Al2O3,nano-ZrO2 and SiC powders under the condition of pressureless sintering.The bulk density and bending strength of samples with 10vol% nano-ZrO2 sintered at 1480℃ were 3.222 g/cm3 and 160.4MPa,respectively.The bending strength of samples after 7 times thermal shock tests (quenching from 1000℃ to 25℃ in air medium) is 132.0MPa,loss rate of bending strength is only 17%.The effect of nano-ZrO2 content on the microstructure and performance of Al2O3-ZrO2(3Y)-SiC composite ceramic was investigated.The experimental results show that the bending strength of samples with above 10vol% nano-ZrO2 content has decreased,because the volume expansion resulting from t-ZrO2 to m-ZrO2 phase transformation is excessive;Adding proper nano-ZrO2 would be contributed to improve the thermal shock resistance of the composite ceramics.The Al2O3-ZrO2(3Y)-SiC composite ceramic has promising potential application in solar thermal power.
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2010CB227105)Self-determined and Innovative Research Funds of WUT(No.44420520001)
文摘High-temperature thermal storage material is one of the critical materials of solar thermal power generation system. Andalusite, kaolin, talc, γ-Al 2 O 3 and partially stabilized zirconia were used as the raw materials, and in-situ synthesis of cordierite was adopted to fabricate thermal storage material for solar thermal power generation via pressureless sintering. The phase compositions, microstructures and thermal shock resistances of the sintered samples were analyzed by XRD, SEM and EDS, and the corresponding mechanical properties were measured. The results show that the major phases of the samples are mullite and zirconium silicate, and the pores distribute uniformly. After being sintered at 1 460 ℃, A4 sample exhibits a better mechanical performance and thermal shock resistance, its loss rate of bending strength after 30 cycles thermal shock is 3.04%, the bulk density and bending strength are 2.86 g·cm-3 and 139.66 MPa, respectively. The better thermal shock resistance of the sample is closely related to the effect of zirconium silicate, such as its uniform distribution, nested growth with mullite, low thermal expansion coeffi cient, high thermal conductivity, etc. This ceramic can be widely used as one of potential thermal storage materials of solar thermal power generation system.
文摘During the calendar year of 2012 the University of Louisiana at Lafayette in conjunction with CLECO Power LLC (CLECO) has constructed and commissioned a pilot scale parabolic trough solar thermal power plant for the first time in Louisiana. The large aperture trough (LAT) solar collectors were provided by Gossamer Space Frames and are coupled with an organic Rankine cycle (ORC) power block provided by ElectraTherm, Inc. for study of the feasibility of cost-effective commercial scale solar thermal power production in Louisiana. Supported by CLECO and providing power to the existing CLECO grid, the implementation of state-of-the-industry collector frames, mirrors, trackers, and ORC power block is studied under various local weather conditions which present varied operating regimes from existing solar thermal installations. The solar collectors provide a design output of 650 kWth and preliminary actual performance data from the system level is presented. The optimal size, configuration and location for such a plant in the given solar resource region are being studied in conjunction with CLECO’s search for optimal renewable energy solutions for the region. The pilot scale size of the facility and implementation of the simpler ORC allow remote operation of the facility and flexibility in operating parameters for optimization studies. The construction of the facility was supported by the Louisiana Department of Natural Resources, the U.S. Department of Energy, and CLECO. The continued operation of the plant is supported by CLECO Power LLC and the University of Louisiana at Lafayette.
文摘To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surface solar collectors, so working at low temperature (i.e., below 100°C). This power plant is aimed at warm countries, i.e., the ones mainly located between -40° and 40° latitude, having available space along their coast. This land based plant, to install on the seashore, is technologically similar to the one used for OTEC (Ocean Thermal Energy Conversion). This plant, apart from supplying electricity with a much better thermodynamic efficiency than OTEC plants, has the main advantage of providing desalinated water for drinking and irrigation. This plant is designed to generate electricity (and desalinated water) night and day and all year round, by means of hot water storage, with just a variation of the power delivered depending on the season.
基金This study was supported by the International Partnership Program of Chinese Academy of Sciences(CAS,Grant No.182111KYSB20160005)the National Nature Science Foundation of China(Grant No.51476164).
文摘A novel solar polygeneration system for heat, power and fresh water production with absorption heat pump(AHP) and humidification-dehumidification(HDH) desalination system was proposed for high-efficiency utilization of solar energy. A case study of the proposed system was investigated based on 1 MW solar thermal power(STP) tower plant located in Beijing. Depending on mathematical modeling of the proposed system, corresponding modules were developed in TRNSYS. Meanwhile, control and operation strategies were fully studied with principal of solar energy cascade utilization. The thermodynamic performance of the proposed system was dynamically simulated at one minute intervals in a typical day. It was found that solar energy utilization level was improved with the help of solar thermal storage system and continuous heating in different operation modes met well with flexible heating loads from 93.76 kW to 169.49 kW. During AHP operation period, its Coefficient of Performance(COP) varied from 1.39 to 1.73 due to recoverable condensate heat restricted by heating demand. Meanwhile, fresh water production of HDH increased from 352.05 kg/h to 416.62 kg/h with Gained Output Ratio(GOR) increase from 2.48 to 2.67. Compared with original STP tower plant, maximum power generation efficiency was increased from 18.66% to 19.22% with power from 1169.69 kW to 1204.44 kW.
文摘Brazil has a predominantly renewable energy matrix, with large participation of water resource in domestic supply of energy. Data from 2019 National Energy Balance show that renewable sources (water, biomass, wind and solar photovoltaic) together represented 83% of domestic electric supply in 2018, where the remaining percentage (16.7%) represented non-renewable sources. The generation of electricity through thermal solar technology was not representative. However, it is known that Brazil presents high potential for the installation of solar thermal plants, especially in the Northeastern Region, where direct normal solar irradiation values are high. It is observed that the (high) costs of the projects associated to the absence of a specific incentive program make Concentrating Solar Power (CSP) plants installation more and more time consuming. As a way to contribute to the insertion of solar thermal energy in Brazil, this article presents a methodology for the location of parabolic trough solar thermal plants of 80 MW for the State of Bahia, located in the Northeastern Region of Brazil. Such methodology was based on the application the Analytic Hierarchy Process (AHP) method and the Geoprocessing Technologies to define potentially available sites for the implementation of the projects. For the analysis, parameters related to energy production in the solar power plant, electric, roadways and water infrastructure of the plant were taken into account, as well as the occupation, slopes and land use. Considering the analyses performed, it was confirmed that Bahia disposes of many sites with great generation potential, especially in the western region of the State (at Barreiras), where favorable conditions were found for the development of the technology. Localities situated in other region of the State were also confirmed as suitable, however with less site availability for the insertion of plants. Methodology validations were also carried out and indicated that the model reached the proposed objective, faithfully representing the real-world simplifications that were made.
文摘A new small concentrating solar power plant which is suitable for urban area is presented, and a theoretical framework for the energy and exergy analysis in the overall power plant is also constructed. The framework can be used to evaluate the energy and exergy losses in each component. Furthermore, the energy and exergy efficiencies have also been computed and compared for the individual components as well as for the overall plant.
文摘Radiation is a form of energy where the angular variable of the direction of its photons has a primary importance, particularly for radiation concentration processes, which are essential tools to reach high temperatures from radiation beams (as the solar ones) with moderate intensities. Solar radiation cannot be used directly to feed thermodynamic cycles, and optical concentration must be applied to that goal. In general, reflection from mirrors is preferred to refraction by lenses in this case, because they have less optical aberrations. Concentration conveys very high temperatures in the receiver. However, the higher the temperature, the lower the efficiency of the solar thermal apparatus. Besides that, economy also suffers quite a lot when going to very high concentration factors, which is one of the main burdens in the development of Solar Thermal Energy. A new configuration of solar radiation concentrator is presented. It includes a salient innovation in the way the mirrors are given the right curvature by mechanical forces. Those mirrors are originally flat and do not need any special thermal treatment for this purpose. The whole device concept has been guided by the principle of thermoeconomic coherence, which requires similar efforts in all degrees of freedom that have strong influence in the performance and cost of the system. The paper shows the decision tree that has oriented the project, following the principle of equilibrium in efforts, which leads to a design window of moderate values in the main variables. The prototype of this new configuration has already been built, and the first stage of research is considered to be finished, because the prototype has shown excellent conditions to include selected (fitting) technologies at a very low cost.
基金financial support provided by Beijing Municipal Natural Science Foundation“Study on the gas-solid heat transfer characteristics and enhancement mechanism of fluidized bed solid particle/sCO_(2) heat exchanger in solar thermal power plant”(No.3222033)by Chinese Universities Scientific Fund(No.15052003).
文摘Due to a higher operating temperature(≥800 ℃),Solar Particle Receiver(SPR)which uses particles as the working medium is considered as one of best candidates to improve the thermoelectric conversion efficiency of concentrating solar power plants.In this paper,a quartz tube solid particle receiver model is fully developed by using the discretized lumped parameter method,in which the calculation process of particle temperature and thermal loss is clearly given.In order to improve the manipulation level of particle receiver during the operation,the dynamic characteristics of the quartz tube particle receiver are comprehensively studied by the disturbance test of selected input parameters.Besides,in order to grasp the influence rule of key parameters on the thermal performance of particle receiver,the key parameters'sensitivity analysis is also deeply studied.The results show that the particle outlet temperature can reach as high as 810 ℃ under a relatively small value of solar flux 600 kW/m^(2),but the receiver efficiency is only about 75%;Besides,the receiver efficiency shows a variation tendency that it rises first falls afterwards with the increase of incident solar flux.The validity of proposed model is verified by a heating experi-mental system with a single quartz tube,and the relative error is not more than 7.9%.The research results are beneficial for understanding the dynamic characteristics and designing the particle receiver.
