Solid-state light sources based on laser diode are becoming great alternative for LEDs. Improvement of the thermal characteristics of InGaN LD is very important for realizing reliable devices. In this investigation th...Solid-state light sources based on laser diode are becoming great alternative for LEDs. Improvement of the thermal characteristics of InGaN LD is very important for realizing reliable devices. In this investigation the influence of the temperature of diode on light parameters was studied. White light was obtained by coupling blue light of diode with yellow phosphors: YAG:Ce3+ and GYAG:Ce3+ with nitride. For three values of the temperature of LD’s stem, regulated by Peltier module, CCT, CRI and chromaticity coordinates were measured by spectroradiometer. The importance of emission characteristics of materials was shown. Subsequently, the influence of temperature on laser diode intensity was investigated for 120 hours. This experiment was repeated for different levels of current and temperature. Finally, the steady state of thermal finite element analysis was performed to reveal the distribution of the temperature. The analysis showed the importance of heat sink and also temperature control.展开更多
The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistan...The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistance,high temperature strength and corrosion resistance.These alloys are manufactured by the equal mixing or larger proportions of five or more alloying elements.HEAs exhibit superior mechanical performance compared to traditional engineering alloys because of the extensive alloying composition and higher entropy of mixing.Solid state welding(SSW)techniques such as friction stir welding(FSW),rotary friction welding(RFW),diffusion bonding(DB)and explosive welding(EW)have been efficiently deployed for improving the microstructural integrity and mechanical properties of welded HEA joints.The HEA interlayers revealed greater potential in supressing the formation of deleterious intermetallic phases and maximizing the mechanical properties of HEAs joints.The similar and dissimilar joining of HEAs has been manifested to be viable for HEA systems which further expands their industrial applications.Thus,the main objective of this review paper is to present a critical review of current state of research,challenges and opportunities and main directions in SSW of HEAs mainly CoCrFeNiMn and Al_xCoCrFeNi alloys.The state of the art of problems,progress and future outlook in SSW of HEAs are critically reviewed by considering the formation of phases,microstructural evolution and mechanical properties of HEAs joints.展开更多
The performance sensitivity of the solid‐state lithium cells to the synergistic interactions of the charge‐transport and mechanical properties of the electrolyte is well acknowledged in the literature,but the quanti...The performance sensitivity of the solid‐state lithium cells to the synergistic interactions of the charge‐transport and mechanical properties of the electrolyte is well acknowledged in the literature,but the quantitative insights therein are very limited.Here,the charge‐transport and mechanical properties of a polymerized ionic‐liquid‐based solid electrolyte are reported.The transference number and diffusion coefficient of lithium in the concentrated solid electrolyte are measured as a function of concentration and stack pressure.The elastoplastic behavior of the electrolyte is quantified under compression,within a home‐made setup,to substantiate the impact of stack pressure on the stability of the Li/electrolyte interface in the symmetric lithium cells.The results spotlight the interaction between the concentration and thickness of the solid electrolyte and the stack pressure in determining the polarization and stability of the solid‐state lithium batteries during extended cycling.展开更多
This paper investigates the concept of Cross Polarization (CP) experiment in addition to revisiting the two potential expansion schemes recently developed in the field of solid-state nuclear magnetic resonance (SSNMR)...This paper investigates the concept of Cross Polarization (CP) experiment in addition to revisiting the two potential expansion schemes recently developed in the field of solid-state nuclear magnetic resonance (SSNMR): namely, the Floquet-Magnus expansion and the Fer expansion. We use the aforementioned expansion schemes for the calculation of effective Hamiltonians and propagators when the spin system undergoes Cross Polarization radiation. CP is the gateway experiment into SSNMR. An in-depth comprehension of the underlying mechanics of spin dynamics during the cross-polarization experiment is pivotal for further experimental developments and optimization of more complex solid-state NMR experiments. The main contribution of this work is a prospect related to spin physics;particularly regarding to generalization of the calculation. This work reports original yet interesting novel ideas and developments that include calculations performed on the CP experiment. In fact, the approach presented could play a major role in the interpretation of several fine NMR experiments in solids, which would in turn provide significant new insights in spin physics. The generality of the work points towards potential applications in problems related in solid-state NMR and theoretical developments of spectroscopy as well as interdisciplinary research areas as long as they include spin dynamics concepts.展开更多
A new type of dye-sensitized nanocrystalline solid state photovoltaic cell based on the wide band gap n-TiO2/p-Cul heterojunction was fabricated. Tetra-carboxyphenyl porphyrine （TPP（COOH）.）, squarylium cyanine der...A new type of dye-sensitized nanocrystalline solid state photovoltaic cell based on the wide band gap n-TiO2/p-Cul heterojunction was fabricated. Tetra-carboxyphenyl porphyrine （TPP（COOH）.）, squarylium cyanine derivative （So-（CH2）,SO3,-Py+） and ruthenium bipyridyl complex （RuL2,（NCS）3,） were used as photosensitizers. Larger photocurrents and photovoltages were shown in the cell sensitized by ruthenium bipyridyl complex and can be fijrther increased by intercalation of a TiO2, thin展开更多
Experimental results related to solid state weldability of superplastic titanium alloys are presented. A correlation between superplastic flow and enhanced solid state weldability was established. It has been experime...Experimental results related to solid state weldability of superplastic titanium alloys are presented. A correlation between superplastic flow and enhanced solid state weldability was established. It has been experimentally shown that a drop in the lower superplastic flow temperature with decreasing mean grain size provides an opportunity to decrease the temperature at whicmethods for titanium alloys.展开更多
In the ultrasonic nondestructive evaluation of the quality of solid state welded joints, such as friction bonding and diffusion bonding, the main difficulty is the identification of micro defects which are most likely...In the ultrasonic nondestructive evaluation of the quality of solid state welded joints, such as friction bonding and diffusion bonding, the main difficulty is the identification of micro defects which are most likely to emerge in the welding process. The ultrasonic echo on the screen of a commercial ultrasonic detector due to a micro defect is so weak that it is completely masked by noise, and impossible to be pointed out. In the present paper, wavelet analysis (WA) is utilized to process A scan ultrasonic signals from weak bonding defects in friction bonding joints and porosity in diffusion bonding joints. First, perception of WA for engineers is given, which demonstrates the physical mechanism of WA when applied to signal processing. From this point of view, WA can be understood easily and more thoroughly. Then the signals from welding joints are decomposed into a time scale plane by means of WA. We notice that noise and the signal echo attributed to the micro defect occupy different scales, which make it possible to enhance the signal to noise ratio of the signals by proper selection and threshold processing of the time scale components of the signals, followed by reconstruction of the processed components.展开更多
Many transition metals are produced by pyrometallurgical procedures which require very considerable amounts of energy, commonly electrical. On the other hand, some transition metals are obtained by employing very comp...Many transition metals are produced by pyrometallurgical procedures which require very considerable amounts of energy, commonly electrical. On the other hand, some transition metals are obtained by employing very complex hydrometallurgical process routes. Solid state carbothermic reduction offers an alternative route for the production of both the metals and their carbides for energy saving and process step elimination.
Consequently, it seemed worth to review the work carried out in this area The metals covered in this brief review are chromium, tungsten, titanium, manganese, niobium and molybdenum. Silicon is also mentioned although it is not a transition metal.展开更多
Wollastonite, a mineral of wide industrial applications was synthesised from rice husk ash silica and limestone. A number of raw batches consisting of these starting materials, in 1:1 molar ratio, were heat treated to...Wollastonite, a mineral of wide industrial applications was synthesised from rice husk ash silica and limestone. A number of raw batches consisting of these starting materials, in 1:1 molar ratio, were heat treated to produce it through solid state reaction from 900℃ to 1300℃. The conducted reaction was monitored by XRD step by step. Amount of Wollastonite formed at every temperature was also studied to some extent. Analyses of the obtained data indicated that the target mineral formation was quite effective and almost proportional to a rise in temperature up to 1200℃. The results from both, XRD and chemical analysis were found in fair agreement with one展开更多
Lignocellulosic substrates are a good carbon source and provide rich growth media for a variety of microorganisms which prodLuce industrially important enzymes. Cellulases are a group of hydrolytic enzymes such as fil...Lignocellulosic substrates are a good carbon source and provide rich growth media for a variety of microorganisms which prodLuce industrially important enzymes. Cellulases are a group of hydrolytic enzymes such as filter paperase (FPase), carboxymethyl cellulase(CMCase) andβ-glucosidase-responsible for release of sugars in the bioconversion of the lignocellulosic biomass into a variety of value-added products. This study examined cellulase production by a newly isolated Aspergillus unguis on individual lignocellulosic substrates in solid state fermentation (SSF). The maximum peak production of enzymes varied from one substrate to another, however,based on the next best solid support and local availability of groundnut fodder supported maximum enzyme yields compared with other solid supports used in this study.Groundnut fodder supported significant production of FPase (5.9 FPU/g of substrate), CMCase (1.1 U/g of substrate) andβ-glucosidase activity (6.5 U/g of substrate) in SSF. Considerable secretion of protein (27.0 mg/g of substrate) on groundnut fodder was recorded. Constant increment of protein content in groundnut fodder due to cultivation of A. unguis is an interesting observation and it has implications for the improvement of nutritive value of groundnut fodder for cattle.展开更多
The photochemical reaction of nilrobenzaldehyde with indole and antipyrine was investigated in solid state.The structures of the new products were identified by means of IR,MS,’H NMR and elemental analysis,and the cr...The photochemical reaction of nilrobenzaldehyde with indole and antipyrine was investigated in solid state.The structures of the new products were identified by means of IR,MS,’H NMR and elemental analysis,and the crystal structure of audition product 2c was determined by X-ray diffraction analysis.The mechanism of this reaction was also proposed.展开更多
High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS...High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS4-polyethylene oxide is synthesized by the solution-phase reaction method with an improved ionic conductivity up to 9.4 × 10-5 S/cm at room temperature. Moreover, polyethylene oxide polymer layer is wrapped homogeneously on the surface of Na3PS4 particles, which could effectively avoid the direct contact between Na3PS4 electrolyte and sodium metal, thus alleviate their side reactions. We demonstrate that all-solid-state battery SnS2/Na with the composite solid electrolyte Na3PS4-polyethylene oxide delivers an enhanced electrochemical performance with 230 m Ah/g after 40 cycles.展开更多
The present study was conducted with an aim to scale up the production of iturin A using soybean curd residue (okara). Iturin A was produced by indigenous bacterial strain Bacillus subtilis RB14-CS through glass colum...The present study was conducted with an aim to scale up the production of iturin A using soybean curd residue (okara). Iturin A was produced by indigenous bacterial strain Bacillus subtilis RB14-CS through glass column reactor (GCR) under solid state fermentation (SSF) was characterized. The enhanced iturin A production was observed with respect to enhanced substrate bed height when SSF was conducted in Erlenmeyer flask. To check the effect of substrate bed height on iturin A production under SSF of okara, GCR was introduced. Substrate bed height of 15 cm was suitable for iturin A production which was about 2700 mg/kg wet substrate. The observed iturin A production by the aerobic bacteria Bacillus subtilis in nearly anaerobic condition in such high substrate bed for SSF is a wonderful finding for development of SSF system in future.展开更多
Background:Rapeseed cake is a good source of protein for animal feed but its utilization is limited due to the presence of anti-nutritional substances,such as glucosinolates(GIs),phytic acid,tannins etc.In the present...Background:Rapeseed cake is a good source of protein for animal feed but its utilization is limited due to the presence of anti-nutritional substances,such as glucosinolates(GIs),phytic acid,tannins etc.In the present study,a solid state fermentation(SSF) using Aspergillus niger was carried out with the purpose of degrading glucosinolates and improving the nutritional quality of rapeseed cake(RSC).The effects of medium composition and incubation conditions on the GIs content in fermented rapeseed cake(FRSC) were investigated,and chemical composition and amino acid in vitro digestibility of RSC substrate fermented under optimal conditions were determined.Results:After 72 h of incubation at 34℃,a 76.89%decrease in GIs of RSC was obtained in solid medium containing 70%RSC,30%wheat bran at optimal moisture content 60%(w/w).Compared to unfermented RSC,trichloroacetic acid soluble protein(TCA-SP),crude protein and ether extract contents of the FRSC were increased(P< 0.05) 103.71,23.02 and 23.54%,respectively.As expected,the contents of NDF and phytic acid declined(P< 0.05) by 9.12 and 44.60%,respectively.Total amino acids(TAA) and essential amino acids(EAA) contents as well as AA in vitro digestibility of FRSC were improved significantly(P< 0.05).Moreover,the enzyme activity of endoglucanase,xylanase,acid protease and phytase were increased(P<0.05) during SSF.Conclusions:Our results indicate that the solid state fermentation offers an effective approach to improving the quality of proteins sources such as rapeseed cake.展开更多
The scientific basis of all-solid-state lithium batteries with inorganic solid electrolytes is reviewed briefly, touching upon solid electrolytes, electrode materials, electrolyte/electrode interface phenomena, fabric...The scientific basis of all-solid-state lithium batteries with inorganic solid electrolytes is reviewed briefly, touching upon solid electrolytes, electrode materials, electrolyte/electrode interface phenomena, fabrication, and evaluation. The challenges and prospects are outlined as well.展开更多
The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and parti...The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and particle size analysis methods. It was found that LSMCs were all of single phase and the synthesis process might be divided into three stages: the decomposition of reactants, the formation of LaMn(Co)O 3 based oxides, and the formation of LSMC solid solution. Typical average and the peak value of particle size, and the specific surface area are 14.65?μm, 16.4?μm and 1.38?m 2/mL, respectively, for mixed reactants and are 23.81?μm, 32.11?μm and 0.5?m 2/mL, respectively, for powder synthesized at 1?200?℃ for 8?h in air.展开更多
By means of equal channel angular extrusion (ECAE) test, upsetting test and metalloscope, reheating microstructures of raw casting ingots, materials prepared by SIMA and materials extruded by ECAE in semi-solid state ...By means of equal channel angular extrusion (ECAE) test, upsetting test and metalloscope, reheating microstructures of raw casting ingots, materials prepared by SIMA and materials extruded by ECAE in semi-solid state were investigated. The results show that compared with those of raw casting ingots and materials prepared by SIMA, reheating microstructure of materials extruded by ECAE is the best and the final grain size is the finest. With increasing holding time, a growing phenomenon occurs in reheating microstructure of materials extruded by ECAE, which can be described by Ostwald ripening law. The average grain size increases firstly, subsequently decreases and the shape factor of grains approaches to 1 as the reheating temperature increases. With increasing equivalent strain, the average grain size decreases. This demonstrates that reheating material extruded by ECAE technology is a good method to prepare AZ91D magnesium alloy semi-solid billets.展开更多
文摘Solid-state light sources based on laser diode are becoming great alternative for LEDs. Improvement of the thermal characteristics of InGaN LD is very important for realizing reliable devices. In this investigation the influence of the temperature of diode on light parameters was studied. White light was obtained by coupling blue light of diode with yellow phosphors: YAG:Ce3+ and GYAG:Ce3+ with nitride. For three values of the temperature of LD’s stem, regulated by Peltier module, CCT, CRI and chromaticity coordinates were measured by spectroradiometer. The importance of emission characteristics of materials was shown. Subsequently, the influence of temperature on laser diode intensity was investigated for 120 hours. This experiment was repeated for different levels of current and temperature. Finally, the steady state of thermal finite element analysis was performed to reveal the distribution of the temperature. The analysis showed the importance of heat sink and also temperature control.
基金financially supported by Ministry of Science and Higher Education of the Russian Federation(Grant No.FENU-2023-0013)。
文摘The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistance,high temperature strength and corrosion resistance.These alloys are manufactured by the equal mixing or larger proportions of five or more alloying elements.HEAs exhibit superior mechanical performance compared to traditional engineering alloys because of the extensive alloying composition and higher entropy of mixing.Solid state welding(SSW)techniques such as friction stir welding(FSW),rotary friction welding(RFW),diffusion bonding(DB)and explosive welding(EW)have been efficiently deployed for improving the microstructural integrity and mechanical properties of welded HEA joints.The HEA interlayers revealed greater potential in supressing the formation of deleterious intermetallic phases and maximizing the mechanical properties of HEAs joints.The similar and dissimilar joining of HEAs has been manifested to be viable for HEA systems which further expands their industrial applications.Thus,the main objective of this review paper is to present a critical review of current state of research,challenges and opportunities and main directions in SSW of HEAs mainly CoCrFeNiMn and Al_xCoCrFeNi alloys.The state of the art of problems,progress and future outlook in SSW of HEAs are critically reviewed by considering the formation of phases,microstructural evolution and mechanical properties of HEAs joints.
基金H2020 LEIT Advanced Materials,Grant/Award Number:875557。
文摘The performance sensitivity of the solid‐state lithium cells to the synergistic interactions of the charge‐transport and mechanical properties of the electrolyte is well acknowledged in the literature,but the quantitative insights therein are very limited.Here,the charge‐transport and mechanical properties of a polymerized ionic‐liquid‐based solid electrolyte are reported.The transference number and diffusion coefficient of lithium in the concentrated solid electrolyte are measured as a function of concentration and stack pressure.The elastoplastic behavior of the electrolyte is quantified under compression,within a home‐made setup,to substantiate the impact of stack pressure on the stability of the Li/electrolyte interface in the symmetric lithium cells.The results spotlight the interaction between the concentration and thickness of the solid electrolyte and the stack pressure in determining the polarization and stability of the solid‐state lithium batteries during extended cycling.
文摘This paper investigates the concept of Cross Polarization (CP) experiment in addition to revisiting the two potential expansion schemes recently developed in the field of solid-state nuclear magnetic resonance (SSNMR): namely, the Floquet-Magnus expansion and the Fer expansion. We use the aforementioned expansion schemes for the calculation of effective Hamiltonians and propagators when the spin system undergoes Cross Polarization radiation. CP is the gateway experiment into SSNMR. An in-depth comprehension of the underlying mechanics of spin dynamics during the cross-polarization experiment is pivotal for further experimental developments and optimization of more complex solid-state NMR experiments. The main contribution of this work is a prospect related to spin physics;particularly regarding to generalization of the calculation. This work reports original yet interesting novel ideas and developments that include calculations performed on the CP experiment. In fact, the approach presented could play a major role in the interpretation of several fine NMR experiments in solids, which would in turn provide significant new insights in spin physics. The generality of the work points towards potential applications in problems related in solid-state NMR and theoretical developments of spectroscopy as well as interdisciplinary research areas as long as they include spin dynamics concepts.
文摘A new type of dye-sensitized nanocrystalline solid state photovoltaic cell based on the wide band gap n-TiO2/p-Cul heterojunction was fabricated. Tetra-carboxyphenyl porphyrine （TPP（COOH）.）, squarylium cyanine derivative （So-（CH2）,SO3,-Py+） and ruthenium bipyridyl complex （RuL2,（NCS）3,） were used as photosensitizers. Larger photocurrents and photovoltages were shown in the cell sensitized by ruthenium bipyridyl complex and can be fijrther increased by intercalation of a TiO2, thin
文摘Experimental results related to solid state weldability of superplastic titanium alloys are presented. A correlation between superplastic flow and enhanced solid state weldability was established. It has been experimentally shown that a drop in the lower superplastic flow temperature with decreasing mean grain size provides an opportunity to decrease the temperature at whicmethods for titanium alloys.
基金This work is financially supported by the Beijing Natural Science Foundation!(No.2 962 0 0 4 )
文摘In the ultrasonic nondestructive evaluation of the quality of solid state welded joints, such as friction bonding and diffusion bonding, the main difficulty is the identification of micro defects which are most likely to emerge in the welding process. The ultrasonic echo on the screen of a commercial ultrasonic detector due to a micro defect is so weak that it is completely masked by noise, and impossible to be pointed out. In the present paper, wavelet analysis (WA) is utilized to process A scan ultrasonic signals from weak bonding defects in friction bonding joints and porosity in diffusion bonding joints. First, perception of WA for engineers is given, which demonstrates the physical mechanism of WA when applied to signal processing. From this point of view, WA can be understood easily and more thoroughly. Then the signals from welding joints are decomposed into a time scale plane by means of WA. We notice that noise and the signal echo attributed to the micro defect occupy different scales, which make it possible to enhance the signal to noise ratio of the signals by proper selection and threshold processing of the time scale components of the signals, followed by reconstruction of the processed components.
文摘Many transition metals are produced by pyrometallurgical procedures which require very considerable amounts of energy, commonly electrical. On the other hand, some transition metals are obtained by employing very complex hydrometallurgical process routes. Solid state carbothermic reduction offers an alternative route for the production of both the metals and their carbides for energy saving and process step elimination.
Consequently, it seemed worth to review the work carried out in this area The metals covered in this brief review are chromium, tungsten, titanium, manganese, niobium and molybdenum. Silicon is also mentioned although it is not a transition metal.
文摘Wollastonite, a mineral of wide industrial applications was synthesised from rice husk ash silica and limestone. A number of raw batches consisting of these starting materials, in 1:1 molar ratio, were heat treated to produce it through solid state reaction from 900℃ to 1300℃. The conducted reaction was monitored by XRD step by step. Amount of Wollastonite formed at every temperature was also studied to some extent. Analyses of the obtained data indicated that the target mineral formation was quite effective and almost proportional to a rise in temperature up to 1200℃. The results from both, XRD and chemical analysis were found in fair agreement with one
文摘Lignocellulosic substrates are a good carbon source and provide rich growth media for a variety of microorganisms which prodLuce industrially important enzymes. Cellulases are a group of hydrolytic enzymes such as filter paperase (FPase), carboxymethyl cellulase(CMCase) andβ-glucosidase-responsible for release of sugars in the bioconversion of the lignocellulosic biomass into a variety of value-added products. This study examined cellulase production by a newly isolated Aspergillus unguis on individual lignocellulosic substrates in solid state fermentation (SSF). The maximum peak production of enzymes varied from one substrate to another, however,based on the next best solid support and local availability of groundnut fodder supported maximum enzyme yields compared with other solid supports used in this study.Groundnut fodder supported significant production of FPase (5.9 FPU/g of substrate), CMCase (1.1 U/g of substrate) andβ-glucosidase activity (6.5 U/g of substrate) in SSF. Considerable secretion of protein (27.0 mg/g of substrate) on groundnut fodder was recorded. Constant increment of protein content in groundnut fodder due to cultivation of A. unguis is an interesting observation and it has implications for the improvement of nutritive value of groundnut fodder for cattle.
基金Supported by National Laboratory of Applied Organic ChemistryLanzhou University
文摘The photochemical reaction of nilrobenzaldehyde with indole and antipyrine was investigated in solid state.The structures of the new products were identified by means of IR,MS,’H NMR and elemental analysis,and the crystal structure of audition product 2c was determined by X-ray diffraction analysis.The mechanism of this reaction was also proposed.
基金funding support from 1000 Talent Plan program(NO.31370086963030)research projects from Shandong Province(2018JMRH0211,2017CXGC1010 and 2016GGX104001)+2 种基金Taishan Scholar Program(11370085961006)the National Science Foundation of Shandong Province(ZR2017MEM002)the Fundamental Research Funds of Shandong University(201810422046,2017JC010,2017JC042,and 2016JC005)。
文摘High ionic conductivity and superior interfacial stability of solid electrolytes at the electrodes are crucial factors for high-performance all-solid-state sodium batteries. Herein, a composite solid electrolyte Na3PS4-polyethylene oxide is synthesized by the solution-phase reaction method with an improved ionic conductivity up to 9.4 × 10-5 S/cm at room temperature. Moreover, polyethylene oxide polymer layer is wrapped homogeneously on the surface of Na3PS4 particles, which could effectively avoid the direct contact between Na3PS4 electrolyte and sodium metal, thus alleviate their side reactions. We demonstrate that all-solid-state battery SnS2/Na with the composite solid electrolyte Na3PS4-polyethylene oxide delivers an enhanced electrochemical performance with 230 m Ah/g after 40 cycles.
文摘The present study was conducted with an aim to scale up the production of iturin A using soybean curd residue (okara). Iturin A was produced by indigenous bacterial strain Bacillus subtilis RB14-CS through glass column reactor (GCR) under solid state fermentation (SSF) was characterized. The enhanced iturin A production was observed with respect to enhanced substrate bed height when SSF was conducted in Erlenmeyer flask. To check the effect of substrate bed height on iturin A production under SSF of okara, GCR was introduced. Substrate bed height of 15 cm was suitable for iturin A production which was about 2700 mg/kg wet substrate. The observed iturin A production by the aerobic bacteria Bacillus subtilis in nearly anaerobic condition in such high substrate bed for SSF is a wonderful finding for development of SSF system in future.
基金granted by the Earmarked Fund for Modern Agro-industry Technology Research System of China(CARS-36)Feed Biotechnology Project of Sichuan Province of China with grant number 2010GZ0193
文摘Background:Rapeseed cake is a good source of protein for animal feed but its utilization is limited due to the presence of anti-nutritional substances,such as glucosinolates(GIs),phytic acid,tannins etc.In the present study,a solid state fermentation(SSF) using Aspergillus niger was carried out with the purpose of degrading glucosinolates and improving the nutritional quality of rapeseed cake(RSC).The effects of medium composition and incubation conditions on the GIs content in fermented rapeseed cake(FRSC) were investigated,and chemical composition and amino acid in vitro digestibility of RSC substrate fermented under optimal conditions were determined.Results:After 72 h of incubation at 34℃,a 76.89%decrease in GIs of RSC was obtained in solid medium containing 70%RSC,30%wheat bran at optimal moisture content 60%(w/w).Compared to unfermented RSC,trichloroacetic acid soluble protein(TCA-SP),crude protein and ether extract contents of the FRSC were increased(P< 0.05) 103.71,23.02 and 23.54%,respectively.As expected,the contents of NDF and phytic acid declined(P< 0.05) by 9.12 and 44.60%,respectively.Total amino acids(TAA) and essential amino acids(EAA) contents as well as AA in vitro digestibility of FRSC were improved significantly(P< 0.05).Moreover,the enzyme activity of endoglucanase,xylanase,acid protease and phytase were increased(P<0.05) during SSF.Conclusions:Our results indicate that the solid state fermentation offers an effective approach to improving the quality of proteins sources such as rapeseed cake.
基金supported by the National High Technology Research and Development Program of China(Grant No.2013AA050906)the National Natural Science Foundation of China(Grant Nos.51172250 and 51202265)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA09010201)Zhejiang Province Key Science and Technology Innovation Team,China(Grant No.2013PT16)
文摘The scientific basis of all-solid-state lithium batteries with inorganic solid electrolytes is reviewed briefly, touching upon solid electrolytes, electrode materials, electrolyte/electrode interface phenomena, fabrication, and evaluation. The challenges and prospects are outlined as well.
文摘The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and particle size analysis methods. It was found that LSMCs were all of single phase and the synthesis process might be divided into three stages: the decomposition of reactants, the formation of LaMn(Co)O 3 based oxides, and the formation of LSMC solid solution. Typical average and the peak value of particle size, and the specific surface area are 14.65?μm, 16.4?μm and 1.38?m 2/mL, respectively, for mixed reactants and are 23.81?μm, 32.11?μm and 0.5?m 2/mL, respectively, for powder synthesized at 1?200?℃ for 8?h in air.
文摘By means of equal channel angular extrusion (ECAE) test, upsetting test and metalloscope, reheating microstructures of raw casting ingots, materials prepared by SIMA and materials extruded by ECAE in semi-solid state were investigated. The results show that compared with those of raw casting ingots and materials prepared by SIMA, reheating microstructure of materials extruded by ECAE is the best and the final grain size is the finest. With increasing holding time, a growing phenomenon occurs in reheating microstructure of materials extruded by ECAE, which can be described by Ostwald ripening law. The average grain size increases firstly, subsequently decreases and the shape factor of grains approaches to 1 as the reheating temperature increases. With increasing equivalent strain, the average grain size decreases. This demonstrates that reheating material extruded by ECAE technology is a good method to prepare AZ91D magnesium alloy semi-solid billets.
