The M_S8.0 Wenchuan earthquake in Sichuan caused heavy casualties and serious economic loss because of damage to engineering structures in high earthquake intensity regions. Earthquake intensity, especially in the nea...The M_S8.0 Wenchuan earthquake in Sichuan caused heavy casualties and serious economic loss because of damage to engineering structures in high earthquake intensity regions. Earthquake intensity, especially in the near source region, as a macroscopic description of distribution of strong ground motions certain correlations with the earthquake source process, such as rupture directivity and the hanging-wall effect of the near-fault ground motions of this earthquake. In this article some qualitative analyses are carried out. The conclusion of this study may be useful for emergence response and rescue after earthquakes, when the strong ground motion recordings and the intensity distribution are not available immediately.展开更多
Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain MS=8.1 (MW=7.8) earth- q...Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain MS=8.1 (MW=7.8) earth- quake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event. The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position (35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing approximately 24.4% of the total moment; The sec- ond stage started at the 55 s and ended at the 113 s, lasting for 58 s and releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for 20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress drop occurred in an area within 50 km to the east of the centroid position.展开更多
The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative...The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative weights on the observed data using an optimized Akaike＇ s Bayesian Information Criterion （ABIC）. The inversion generated the source parameters. Strike, dip and slip were 218°, 39° and 100. 8° ,respectively. A seismic moment （M0） was 2. 1 × 10^20 Nm with a moment magnitude （Mw） of 6. 8, and a source duration was approximately 30 second. The rupture propagated along the dip direction, and the maximum slip occurred at the hypocenter. The maximum slip was approximately 2. 1 m, although this earthquake did not cause an apparent surface rupture. The energy was mainly released within 10 second. In addition, the Lushan earthquake was apparently related to the 2008 Wenchuan earthquake. However, the question of whether it was an aftershock of the Wenchuan earthquake requires further study.展开更多
Source localization by matched-field processing （MFP） can be accelerated by building a database of Green＇s functions which however requires a bulk-storage memory. According to the sparsity of the source locations i...Source localization by matched-field processing （MFP） can be accelerated by building a database of Green＇s functions which however requires a bulk-storage memory. According to the sparsity of the source locations in the search grids of MFP, compressed sensing inspires an approach to reduce the database by introducing a sensing matrix to compress the database. Compressed sensing is further used to estimate the source locations with higher resolution by solving the β -norm optimization problem of the compressed Green＇s function and the data received by a vertieal/horizontal line array. The method is validated by simulation and is verified with the experimental data.展开更多
plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of MS=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tenso...plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of MS=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M0=0.97 × 1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the MS=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.展开更多
Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed...Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.展开更多
Strontium bismuth tantalum (SBT) fine power was prepared by Sol-Gel method. Pentaethoxy tantalum, strontium acetate and bismuth subnitrate were used as raw materials, and were dissolved in proper order in ethylene gl...Strontium bismuth tantalum (SBT) fine power was prepared by Sol-Gel method. Pentaethoxy tantalum, strontium acetate and bismuth subnitrate were used as raw materials, and were dissolved in proper order in ethylene glycol to form transparent sol. The mixed precursor was dried at 80℃ and annealed at 800℃ for 1 h. Crystallized nanometer sized SBT fine powder was obtained and characterized by XRD.展开更多
The 10 January 2018 Mw7.5 Swan island,Honduras earthquake occurred on the Swan island fault,which is a transform plate boundary between the North American and Caribbean plates.Here we back-project the rupture process ...The 10 January 2018 Mw7.5 Swan island,Honduras earthquake occurred on the Swan island fault,which is a transform plate boundary between the North American and Caribbean plates.Here we back-project the rupture process of the earthquake using dense seismic stations in Alaska,and find that the earthquake ruptured at least three faults(three stages)for a duration of~40 s.The rupture speed for the longest fault(stage 3)is as fast as 5 km/s,which is much faster than the local shear wave velocity of~4 km/s.Supershear rupture was incidentally observed on long and straight strike-slip faults.This study shows a supershear rupture that occured on a strike-slip fault with moderate length,implying that supershear rupture might commonly occur on large strike-slip earthquakes.The common occurrence of supershear rupture on strike-slip earthquakes will challenge present understanding of crack physics,as well as strong ground motion evaluation in earthquake engineering.展开更多
Multiple source provenance of sediments and submarine fan formation are herein investigated based on Quaternary sandy barriers of the Brazilian Southernmost Coastal Plain.LA-ICP-MS dating on 1625 detrital zircons from...Multiple source provenance of sediments and submarine fan formation are herein investigated based on Quaternary sandy barriers of the Brazilian Southernmost Coastal Plain.LA-ICP-MS dating on 1625 detrital zircons from marine and aeolian facies sands of four successive lagoon-barrier systems are analyzed.The characterization of Archean to Pleistocene zircons into a younger Andean(22±4 Ma to 1±1 Ma,48 from 1625),Mesozoic to Paleozoic,and Mesoproterozoic(479 from 1622)populations suggest that the main feeding of sediments to the coastal plain occurred through the La Plata River drainage system.The significant contribution of sediments is transported from the mouth of La Plata River northward by longshore circulation(littoral drift).Minor contributions are also recognized as.a farther source associatedwith the Patagonia drainage and nearby source related to the Uruguay/Rio Grande do Sul Shield and the ParanáBasin,drained by the Camaquãand Jacuírivers.The latter one is recognized by the contribution fromNeoproterozoic to Early Paleozoic,and some Paleoproterozoic and Archean zircon grains.The definition of the sources of clastic sediments allows inferences about the origination of Rio Grande Fan where both the cold Falkland and the warm Brazil currents played a major role.展开更多
The paper analyzes five Finnish case companies to study the sourcing process from China. A framework of a six-stage sourcing process is developed that includes finding and choosing suppliers, making contracts and orde...The paper analyzes five Finnish case companies to study the sourcing process from China. A framework of a six-stage sourcing process is developed that includes finding and choosing suppliers, making contracts and orders, performing production and quality control, planning logistics, inspecting purchases, and developing supply chain management. Each stage describes the activities from the channels of seeking suppliers to cooperative areas for further development. The case study illustrates the practices of sourcing from China are actually quite similar to the sourcing process in other countries. The study highlights that quality control is the core issue in sourcing from China. Moreover, the difference in understanding sustainable quality affects supplier screening and quality control. Close cooperation on quality control is the key to managing the supply chain to increase competitive advantage through sourcing from China.展开更多
Arsenic(As),fluoride(F^(−))are both ubiquitous in groundwater,and co-exposure to these elements through contaminated drinking water may cause detrimental effects on human health more in comparison with individual expo...Arsenic(As),fluoride(F^(−))are both ubiquitous in groundwater,and co-exposure to these elements through contaminated drinking water may cause detrimental effects on human health more in comparison with individual exposure.As,F^(−)co-occurrence in groundwater of the inland plain in Huaihe River Basin,China is a major concern,where inhabitants are rely on groundwater as the leading water source for drinking to date.This work employs an approach of hydrochemical analysis and modelling to identify the possible origin of As and F^(−),to analyze co-enrichment mechanism,and to estimate the associated exposure risk.The results shows presence of elevated As and F^(−)concentrations is an important factor affecting groundwater quality from 62 groundwater samples.The recorded As concentrations vary from 0.23 to 20.40μg/L,with a mean of 5.95μg/L,F^(−)concentrations vary from 0.54 to 2.60μg/L,with a mean of 1.29 mg/L,and 8%of samples are simultaneously above their permissible limits in drinking water by the WHO.Groundwater with As,F^(−)co-contamination is occurred within reducing and alkaline aquifers,and its chemical type is HCO_(3)–Na.The hydrochemical processes involved in the co-contamination are reductive desorption,evaporation,and ion exchange,which are controlled by local geology,geomorphology,and hydrochemistry.Groundwater As is derived and released by reductive desorption and F^(−)is mainly originated by fluorite dissolution.Groundwater As,F^(−)are geogenic sources,and the mechanisms for co-contamination are associated with high elemental abundance,flat terrain,alkaline and reductive groundwater conditions.The research provides a case study about groundwater As,F^(−)co-contamination,which may be enhance understanding the co-enrichment mechanism in semi-humid areas.展开更多
On January 10, 1998, an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake has been the most significant event occurred in the northern...On January 10, 1998, an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake has been the most significant event occurred in the northern China in the recent years. Historical seismicity in the Zhangbei-Shangyi region was very low. In the epicentral area no active fault capable of generating a moderate earthquake like this event was found. The earthquake locations of the main shock and its aftershocks of the Zhangbei-Shangyi earthquake sequence given by several agencies and authors were diverse and the resulted hypocentral distribution revealed no any dominant horizontal lineation. To study the seismogenic structure of the Zhangbei-Shangyi earthquake, in this paper the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated using the master event relative relocation algorithm. The relocated results show that the epicentral location of the main shock was 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 15 km. The hypocenters of the aftershocks distributed in a nearly vertical N20E-striking plane and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a nearly N-S- to NNE-SSW-striking fault with right-lateral and reverse slip, and that the occurrence of this event was associated with the horizontal and ENE-oriented compressive tectonic stress, which was compatible with the tectonic stress field in the northern China.展开更多
On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake is the most signifi...On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake is the most significant event to have occurred in northern China in the recent years. The earthquake-generating structure of this event was not clear due to no active fault capable of generating a moderate earthquake was found in the epicentral area, nor surface ruptures with any predominate orientation were observed, no distinct orientation of its aftershock distribution given by routine earthquake location was shown. To study the seismogenic structure of the Zhangbei- Shangyi earthquake, the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated by the authors of this paper in 2002 using the master event relative relocation technique. The relocated epicenter of the main shock was located at 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of this event. The relocated focal depth of the main shock was 15 km. Hypocenters of the aftershocks distributed in a nearly vertical plane striking 180~200 and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a NNE-SSW-striking fault with right-lateral and reverse slip. In this paper, a relocation of the Zhangbei-Shangyi earthquake sequence has been done using the double difference earthquake location algorithm (DD algorithm), and consistent results with that obtained by the master event technique were obtained. The relocated hypocenters of the main shock are located at 41.131癗, 114.456癊, which was located 2.5 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 12.8 km. Hypocenters of the aftershocks also distributed in a nearly vertical N10E-striking plane and its vicinity. The relocated results using DD algorithm clearly indicated that the seismogenic structure of this event was a NNE-striking fault again.展开更多
The seismicity characteristics of the earthquake swarm occurred in Datong area in Shanxi Province during 1989-1993 period are studied in detail. The focal mechanisms and rupture processes of the principal earthquakes ...The seismicity characteristics of the earthquake swarm occurred in Datong area in Shanxi Province during 1989-1993 period are studied in detail. The focal mechanisms and rupture processes of the principal earthquakes in itare also estimated in this paper. A mechanical model of fracture system of asymmetrical conjugate array is suggested from the view point of fracture propagation in order to simulate the mechanical features in the seismicsource respect of the Datong swarm sequence. The computation results of displacement field, stress field andstrain energy distribution from this model by using finite element method are presented. In addition, somerecorded data of geothermal precursors before these three climaxes of the Datong earthquake swarm sequence arediscussed mainly in this paper.展开更多
With the support by the National Natural Science Foundation of China and the Chinese Academy of Sciences,the research team led by Prof.Li Jun(李军)at the State Key Laboratory of Organic Geochemistry,Guangzhou Institut...With the support by the National Natural Science Foundation of China and the Chinese Academy of Sciences,the research team led by Prof.Li Jun(李军)at the State Key Laboratory of Organic Geochemistry,Guangzhou Institute of Geochemistry,Chinese Academy of Sciences,illustrated the source dynamics of carbonaceous aerosol during the haze bloom-decay process in Beijing and Guangzhou based on展开更多
It is seriously interfered by ship noise when analyzing and extracting broadband spark sound source signal. In the energy concentrated domain which is below 5 kHz, the traditional scale correlation filtering algorithm...It is seriously interfered by ship noise when analyzing and extracting broadband spark sound source signal. In the energy concentrated domain which is below 5 kHz, the traditional scale correlation filtering algorithm, which is based on adjacent-scale correlation, has limited anti-interference ability due to the low signal-to-noise ratio （SNR） and similar Lipschitz exponent characteristic of each other. However, because different frequency bands of the broadband electric spark signal have different noise interferences, the filtering algorithm based on adjacent-scale correlation is adapted to high SNR and small-scale high-frequency wavelet coefficients filtering; the filtering algorithm based on cross-scale correlation is adapted to low SNR and large-scale low-frequency wavelet coefficients filtering, and the threshold coefficient selection method had been corrected in the algorithm. It is shown that the filtering algorithm has a good filtering effect and extracts the broadband spark sound source signal effectively; it is applicable to broadband underwater acoustic signM processing in the presence of narrow-band strong interference background noise.展开更多
In this paper the properties of space- time correlation function of the noise field of moving source in layered statistic inhomogeneous medium are studied and the effects of random fluctuating boundary are considered ...In this paper the properties of space- time correlation function of the noise field of moving source in layered statistic inhomogeneous medium are studied and the effects of random fluctuating boundary are considered as well.It has been shown, theoretically and experimentally, multi-path propergating effects cause the dispersion of the correlation function and fluctuations of the medium refraction index and the boundary cause the fluctuation of it.The effect of the movement of the noise source on the output of real- time correlator is equivalent to a low- pass filter added the drift of space- time correlation function.These properties of the correlation function cause grave degradation of the signal processing gain of noise ranging sonar system.The fluctuating and the distortion of conrrelation function made it difficult to realize the noise ranging.So in this paper, a method of space correlation ranging by a linear array of four points with short separation and long span and a technigue of dual- correlation signal processing are presented. By this, the influences of previously mentioned factors are greatly overcomed.Futhermore, for the long period and great delay fluctuation of the dual- correlation function output caused by internal wave, a method of limited memory Quasi- Kalman filtering is developed and the effective accurate ranging and tracing of noise ranging sonar are able to be tralized finally.展开更多
An earthquake of Mw6.4 occurred in Pishan County in Xinjiang Province, northwestern Tibetan Plateau, on July 3,2015. The epicenter was located on an active blind thrust system located at the northern margin of the Wes...An earthquake of Mw6.4 occurred in Pishan County in Xinjiang Province, northwestern Tibetan Plateau, on July 3,2015. The epicenter was located on an active blind thrust system located at the northern margin of the Western Kunlun Mountain Orogenic Belt southwest of the Tarim Basin. We constructed a shovel-shaped fault model based on the layered-crust model with reference to the seismic reflection profile, and obtained the rupture process of the earthquake from the joint inversion of Interferometric Synthetic Aperture Radar(InSAR) measurements, far-field waveform data, and Global Positioning System(GPS) data. The results show that the seismic fault dips southward with a strike of 109°, and the rupture direction was essentially northward. The fault plane rupture distribution is concentrated, with a maximum recorded slip of 73 cm. The main features of the fault are as follows: low inclination angle(25°–10°), thrust slip at a depth of 9–13 km, rupture propagation time of about 12 s, no significant slip in soft or hard sedimentary layers at 0–4 km depth and propagation from the initial rupture point to the surrounding area with no obvious directionality. The InSAR time-series analysis method is used to determine the deformation rate in the source region within 2 years after the earthquake, and the maximum value is ~17 mm yr-1 in the radar line-of-sight direction. Obvious post-earthquake deformation is evident in the hanging wall, with a similar trend to the coseismic displacement field. These results suggest that the Pishan earthquake has not completely released the accumulated energy of the region, given that the multilayer fold structure above the blind fault is still in a process of slow uplift since the earthquake. Post-earthquake adjustment models and aftershock risk analysis require further study using more independent data.展开更多
This paper presents a new optimisation approach for variance within a supply chain management process.The approach is presented by the variance cube of purchasing(VCP)that involves a lean method for variance optimisat...This paper presents a new optimisation approach for variance within a supply chain management process.The approach is presented by the variance cube of purchasing(VCP)that involves a lean method for variance optimisation,namely the cost and variance driver analysis.The approach focuses on the optimisation and the control of existing process variance within the supply chain.The application of the cube is presented by a case study involving a globally acting Tier 1 supplier,who produces steering systems for passenger cars and commercial vehicles.In this case,the sourcing process of this Tier 1 supplier will be analysed,evaluated and optimised regarding variance.The variance is presented in the form of the number of suppliers who are involved in the sourcing process.Unnecessary existing process variance,like an unnecessary huge number of suppliers within the sourcing process,is a type of waste.Time,money,quality and technology can be saved through a greater understanding of the optimal number of suppliers within a sourcing process.The results of the case study led to a generalised method to optimise the existing process variance,present cost improvements as well as optimising the key performance indicator to manage the number of suppliers in the sourcing process.The general approach can be used for other company departments like logistics and for different industries other than automotive.The insights of this article support the operative user and the strategic company management in order to reduce and improve unnecessary variance in different sections.The structured analysis of supply chain process variance via the VCP and the key performance indicator“optimal supplier number per sourcing process”are new to company management.展开更多
基金funded by basic research fund programs DQJB08B02 and DQJB06A01 of state-level public welfare scientific research institutions of Institute of Geophysics,CEA
文摘The M_S8.0 Wenchuan earthquake in Sichuan caused heavy casualties and serious economic loss because of damage to engineering structures in high earthquake intensity regions. Earthquake intensity, especially in the near source region, as a macroscopic description of distribution of strong ground motions certain correlations with the earthquake source process, such as rupture directivity and the hanging-wall effect of the near-fault ground motions of this earthquake. In this article some qualitative analyses are carried out. The conclusion of this study may be useful for emergence response and rescue after earthquakes, when the strong ground motion recordings and the intensity distribution are not available immediately.
基金Joint Seismological Science Foundation of China (103066) and Foundation of the Seismic Pattern and Digital Seis- mic Data Application Research Office of Institute of Earthquake Science of the China Earthquake Administration.
文摘Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain MS=8.1 (MW=7.8) earth- quake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event. The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position (35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing approximately 24.4% of the total moment; The sec- ond stage started at the 55 s and ended at the 113 s, lasting for 58 s and releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for 20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress drop occurred in an area within 50 km to the east of the centroid position.
基金jointly supported by the Director of the Foundation of the Institute of Seismology,China Earthquake Administration(IS201102643)the National Natural Science Foundation of China(41004020)
文摘The spatial and temporal slip distribution of the Lushan earthquake was estimated using teleseismic body wave data. To perform a stable inversion, we applied smoothing constraints and determined their optimal relative weights on the observed data using an optimized Akaike＇ s Bayesian Information Criterion （ABIC）. The inversion generated the source parameters. Strike, dip and slip were 218°, 39° and 100. 8° ,respectively. A seismic moment （M0） was 2. 1 × 10^20 Nm with a moment magnitude （Mw） of 6. 8, and a source duration was approximately 30 second. The rupture propagated along the dip direction, and the maximum slip occurred at the hypocenter. The maximum slip was approximately 2. 1 m, although this earthquake did not cause an apparent surface rupture. The energy was mainly released within 10 second. In addition, the Lushan earthquake was apparently related to the 2008 Wenchuan earthquake. However, the question of whether it was an aftershock of the Wenchuan earthquake requires further study.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11374271 and 11374270the Fundamental Research Funds for the Central Universities under Grant No 201513038
文摘Source localization by matched-field processing （MFP） can be accelerated by building a database of Green＇s functions which however requires a bulk-storage memory. According to the sparsity of the source locations in the search grids of MFP, compressed sensing inspires an approach to reduce the database by introducing a sensing matrix to compress the database. Compressed sensing is further used to estimate the source locations with higher resolution by solving the β -norm optimization problem of the compressed Green＇s function and the data received by a vertieal/horizontal line array. The method is validated by simulation and is verified with the experimental data.
基金The Specialized Funds for National Key Basic Study (G1998040704), the Dual Project of China Earthquake Admini-stration (9691309020301) and National Natural Science Foundation of China (46764010).
文摘plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of MS=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M0=0.97 × 1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the MS=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.
文摘Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.
文摘Strontium bismuth tantalum (SBT) fine power was prepared by Sol-Gel method. Pentaethoxy tantalum, strontium acetate and bismuth subnitrate were used as raw materials, and were dissolved in proper order in ethylene glycol to form transparent sol. The mixed precursor was dried at 80℃ and annealed at 800℃ for 1 h. Crystallized nanometer sized SBT fine powder was obtained and characterized by XRD.
基金This work is supported by the National Key R&D Program of China(No.2018YFC0603500)Programme on Global Change and Air-Sea Interaction(GASI-GEOGE-02)+2 种基金NSFC(Nos.41474050,41425012,41874062 and 41922025)111 project(No.BP0719022)the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)CUG170602(D.W.).
文摘The 10 January 2018 Mw7.5 Swan island,Honduras earthquake occurred on the Swan island fault,which is a transform plate boundary between the North American and Caribbean plates.Here we back-project the rupture process of the earthquake using dense seismic stations in Alaska,and find that the earthquake ruptured at least three faults(three stages)for a duration of~40 s.The rupture speed for the longest fault(stage 3)is as fast as 5 km/s,which is much faster than the local shear wave velocity of~4 km/s.Supershear rupture was incidentally observed on long and straight strike-slip faults.This study shows a supershear rupture that occured on a strike-slip fault with moderate length,implying that supershear rupture might commonly occur on large strike-slip earthquakes.The common occurrence of supershear rupture on strike-slip earthquakes will challenge present understanding of crack physics,as well as strong ground motion evaluation in earthquake engineering.
基金the Brazilian Scholarship Agency(CAPES) for the scholarship to the second author (JJC)the National Council for Scientific and Technological Development–CNPq for the financial support (grant#305053/2014-0).
文摘Multiple source provenance of sediments and submarine fan formation are herein investigated based on Quaternary sandy barriers of the Brazilian Southernmost Coastal Plain.LA-ICP-MS dating on 1625 detrital zircons from marine and aeolian facies sands of four successive lagoon-barrier systems are analyzed.The characterization of Archean to Pleistocene zircons into a younger Andean(22±4 Ma to 1±1 Ma,48 from 1625),Mesozoic to Paleozoic,and Mesoproterozoic(479 from 1622)populations suggest that the main feeding of sediments to the coastal plain occurred through the La Plata River drainage system.The significant contribution of sediments is transported from the mouth of La Plata River northward by longshore circulation(littoral drift).Minor contributions are also recognized as.a farther source associatedwith the Patagonia drainage and nearby source related to the Uruguay/Rio Grande do Sul Shield and the ParanáBasin,drained by the Camaquãand Jacuírivers.The latter one is recognized by the contribution fromNeoproterozoic to Early Paleozoic,and some Paleoproterozoic and Archean zircon grains.The definition of the sources of clastic sediments allows inferences about the origination of Rio Grande Fan where both the cold Falkland and the warm Brazil currents played a major role.
文摘The paper analyzes five Finnish case companies to study the sourcing process from China. A framework of a six-stage sourcing process is developed that includes finding and choosing suppliers, making contracts and orders, performing production and quality control, planning logistics, inspecting purchases, and developing supply chain management. Each stage describes the activities from the channels of seeking suppliers to cooperative areas for further development. The case study illustrates the practices of sourcing from China are actually quite similar to the sourcing process in other countries. The study highlights that quality control is the core issue in sourcing from China. Moreover, the difference in understanding sustainable quality affects supplier screening and quality control. Close cooperation on quality control is the key to managing the supply chain to increase competitive advantage through sourcing from China.
基金The work was financially supported by China Geological Survey(Grant No.DD202201756,DD20230428).
文摘Arsenic(As),fluoride(F^(−))are both ubiquitous in groundwater,and co-exposure to these elements through contaminated drinking water may cause detrimental effects on human health more in comparison with individual exposure.As,F^(−)co-occurrence in groundwater of the inland plain in Huaihe River Basin,China is a major concern,where inhabitants are rely on groundwater as the leading water source for drinking to date.This work employs an approach of hydrochemical analysis and modelling to identify the possible origin of As and F^(−),to analyze co-enrichment mechanism,and to estimate the associated exposure risk.The results shows presence of elevated As and F^(−)concentrations is an important factor affecting groundwater quality from 62 groundwater samples.The recorded As concentrations vary from 0.23 to 20.40μg/L,with a mean of 5.95μg/L,F^(−)concentrations vary from 0.54 to 2.60μg/L,with a mean of 1.29 mg/L,and 8%of samples are simultaneously above their permissible limits in drinking water by the WHO.Groundwater with As,F^(−)co-contamination is occurred within reducing and alkaline aquifers,and its chemical type is HCO_(3)–Na.The hydrochemical processes involved in the co-contamination are reductive desorption,evaporation,and ion exchange,which are controlled by local geology,geomorphology,and hydrochemistry.Groundwater As is derived and released by reductive desorption and F^(−)is mainly originated by fluorite dissolution.Groundwater As,F^(−)are geogenic sources,and the mechanisms for co-contamination are associated with high elemental abundance,flat terrain,alkaline and reductive groundwater conditions.The research provides a case study about groundwater As,F^(−)co-contamination,which may be enhance understanding the co-enrichment mechanism in semi-humid areas.
基金The Project Mechanism and Prediction of Continental Strong Earthquakes Ministry of Science and Technology Peoples Republic of China (G19980407/95-13-02-04).
文摘On January 10, 1998, an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake has been the most significant event occurred in the northern China in the recent years. Historical seismicity in the Zhangbei-Shangyi region was very low. In the epicentral area no active fault capable of generating a moderate earthquake like this event was found. The earthquake locations of the main shock and its aftershocks of the Zhangbei-Shangyi earthquake sequence given by several agencies and authors were diverse and the resulted hypocentral distribution revealed no any dominant horizontal lineation. To study the seismogenic structure of the Zhangbei-Shangyi earthquake, in this paper the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated using the master event relative relocation algorithm. The relocated results show that the epicentral location of the main shock was 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 15 km. The hypocenters of the aftershocks distributed in a nearly vertical N20E-striking plane and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a nearly N-S- to NNE-SSW-striking fault with right-lateral and reverse slip, and that the occurrence of this event was associated with the horizontal and ENE-oriented compressive tectonic stress, which was compatible with the tectonic stress field in the northern China.
文摘On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake is the most significant event to have occurred in northern China in the recent years. The earthquake-generating structure of this event was not clear due to no active fault capable of generating a moderate earthquake was found in the epicentral area, nor surface ruptures with any predominate orientation were observed, no distinct orientation of its aftershock distribution given by routine earthquake location was shown. To study the seismogenic structure of the Zhangbei- Shangyi earthquake, the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated by the authors of this paper in 2002 using the master event relative relocation technique. The relocated epicenter of the main shock was located at 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of this event. The relocated focal depth of the main shock was 15 km. Hypocenters of the aftershocks distributed in a nearly vertical plane striking 180~200 and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a NNE-SSW-striking fault with right-lateral and reverse slip. In this paper, a relocation of the Zhangbei-Shangyi earthquake sequence has been done using the double difference earthquake location algorithm (DD algorithm), and consistent results with that obtained by the master event technique were obtained. The relocated hypocenters of the main shock are located at 41.131癗, 114.456癊, which was located 2.5 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 12.8 km. Hypocenters of the aftershocks also distributed in a nearly vertical N10E-striking plane and its vicinity. The relocated results using DD algorithm clearly indicated that the seismogenic structure of this event was a NNE-striking fault again.
文摘The seismicity characteristics of the earthquake swarm occurred in Datong area in Shanxi Province during 1989-1993 period are studied in detail. The focal mechanisms and rupture processes of the principal earthquakes in itare also estimated in this paper. A mechanical model of fracture system of asymmetrical conjugate array is suggested from the view point of fracture propagation in order to simulate the mechanical features in the seismicsource respect of the Datong swarm sequence. The computation results of displacement field, stress field andstrain energy distribution from this model by using finite element method are presented. In addition, somerecorded data of geothermal precursors before these three climaxes of the Datong earthquake swarm sequence arediscussed mainly in this paper.
文摘With the support by the National Natural Science Foundation of China and the Chinese Academy of Sciences,the research team led by Prof.Li Jun(李军)at the State Key Laboratory of Organic Geochemistry,Guangzhou Institute of Geochemistry,Chinese Academy of Sciences,illustrated the source dynamics of carbonaceous aerosol during the haze bloom-decay process in Beijing and Guangzhou based on
基金supported by the Scientific Research Foundation of Third Institute of Oceanography,SOA(NO.2010018)the Public Science and Technology Research Funds Projects of Ocean(NO.201005004,NO.201305038)
文摘It is seriously interfered by ship noise when analyzing and extracting broadband spark sound source signal. In the energy concentrated domain which is below 5 kHz, the traditional scale correlation filtering algorithm, which is based on adjacent-scale correlation, has limited anti-interference ability due to the low signal-to-noise ratio （SNR） and similar Lipschitz exponent characteristic of each other. However, because different frequency bands of the broadband electric spark signal have different noise interferences, the filtering algorithm based on adjacent-scale correlation is adapted to high SNR and small-scale high-frequency wavelet coefficients filtering; the filtering algorithm based on cross-scale correlation is adapted to low SNR and large-scale low-frequency wavelet coefficients filtering, and the threshold coefficient selection method had been corrected in the algorithm. It is shown that the filtering algorithm has a good filtering effect and extracts the broadband spark sound source signal effectively; it is applicable to broadband underwater acoustic signM processing in the presence of narrow-band strong interference background noise.
文摘In this paper the properties of space- time correlation function of the noise field of moving source in layered statistic inhomogeneous medium are studied and the effects of random fluctuating boundary are considered as well.It has been shown, theoretically and experimentally, multi-path propergating effects cause the dispersion of the correlation function and fluctuations of the medium refraction index and the boundary cause the fluctuation of it.The effect of the movement of the noise source on the output of real- time correlator is equivalent to a low- pass filter added the drift of space- time correlation function.These properties of the correlation function cause grave degradation of the signal processing gain of noise ranging sonar system.The fluctuating and the distortion of conrrelation function made it difficult to realize the noise ranging.So in this paper, a method of space correlation ranging by a linear array of four points with short separation and long span and a technigue of dual- correlation signal processing are presented. By this, the influences of previously mentioned factors are greatly overcomed.Futhermore, for the long period and great delay fluctuation of the dual- correlation function output caused by internal wave, a method of limited memory Quasi- Kalman filtering is developed and the effective accurate ranging and tracing of noise ranging sonar are able to be tralized finally.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41474036 & 41174037)the 13th Five-year Informatization Plan of Chinese Academy of Sciences (Grant No. XXH13505-06)
文摘An earthquake of Mw6.4 occurred in Pishan County in Xinjiang Province, northwestern Tibetan Plateau, on July 3,2015. The epicenter was located on an active blind thrust system located at the northern margin of the Western Kunlun Mountain Orogenic Belt southwest of the Tarim Basin. We constructed a shovel-shaped fault model based on the layered-crust model with reference to the seismic reflection profile, and obtained the rupture process of the earthquake from the joint inversion of Interferometric Synthetic Aperture Radar(InSAR) measurements, far-field waveform data, and Global Positioning System(GPS) data. The results show that the seismic fault dips southward with a strike of 109°, and the rupture direction was essentially northward. The fault plane rupture distribution is concentrated, with a maximum recorded slip of 73 cm. The main features of the fault are as follows: low inclination angle(25°–10°), thrust slip at a depth of 9–13 km, rupture propagation time of about 12 s, no significant slip in soft or hard sedimentary layers at 0–4 km depth and propagation from the initial rupture point to the surrounding area with no obvious directionality. The InSAR time-series analysis method is used to determine the deformation rate in the source region within 2 years after the earthquake, and the maximum value is ~17 mm yr-1 in the radar line-of-sight direction. Obvious post-earthquake deformation is evident in the hanging wall, with a similar trend to the coseismic displacement field. These results suggest that the Pishan earthquake has not completely released the accumulated energy of the region, given that the multilayer fold structure above the blind fault is still in a process of slow uplift since the earthquake. Post-earthquake adjustment models and aftershock risk analysis require further study using more independent data.
文摘This paper presents a new optimisation approach for variance within a supply chain management process.The approach is presented by the variance cube of purchasing(VCP)that involves a lean method for variance optimisation,namely the cost and variance driver analysis.The approach focuses on the optimisation and the control of existing process variance within the supply chain.The application of the cube is presented by a case study involving a globally acting Tier 1 supplier,who produces steering systems for passenger cars and commercial vehicles.In this case,the sourcing process of this Tier 1 supplier will be analysed,evaluated and optimised regarding variance.The variance is presented in the form of the number of suppliers who are involved in the sourcing process.Unnecessary existing process variance,like an unnecessary huge number of suppliers within the sourcing process,is a type of waste.Time,money,quality and technology can be saved through a greater understanding of the optimal number of suppliers within a sourcing process.The results of the case study led to a generalised method to optimise the existing process variance,present cost improvements as well as optimising the key performance indicator to manage the number of suppliers in the sourcing process.The general approach can be used for other company departments like logistics and for different industries other than automotive.The insights of this article support the operative user and the strategic company management in order to reduce and improve unnecessary variance in different sections.The structured analysis of supply chain process variance via the VCP and the key performance indicator“optimal supplier number per sourcing process”are new to company management.
