A novel scheme to suppress both stimulated Brillouin scattering(SBS) and stimulated Raman scattering(SRS) by combining an alternating frequency(AF) laser and a transverse magnetic field is proposed. The AF laser allow...A novel scheme to suppress both stimulated Brillouin scattering(SBS) and stimulated Raman scattering(SRS) by combining an alternating frequency(AF) laser and a transverse magnetic field is proposed. The AF laser allows the laser frequency to change discretely and alternately over time. The suppression of SBS is significant as long as the AF difference is greater than the linear growth rate of SBS or the alternating time of the laser frequency is shorter than the linear growth time of SBS. However, the AF laser proves ineffective in suppressing SRS, which usually has a much higher linear growth rate than SBS. To remedy that, a transverse magnetic field is included to suppress the SRS instability. The electrons trapped in the electron plasma waves(EPWs) of SRS can be accelerated by the surfatron mechanism in a transverse magnetic field and eventually detrapped. While continuously extracting energy from EPWs, the EPWs are dissipated and the kinetic inflation of SRS is suppressed. The one-dimensional particle-in-cell simulation results show that both SBS and SRS can be effectively suppressed by combining the AF laser with a transverse magnetic field with tens of Tesla. The total reflectivity can be dramatically reduced by more than one order of magnitude. These results provide a potential reference for controlling SBS and SRS under the related parameters of inertial confinement fusion.展开更多
This paper proposes a method for measuring the stimulated Brillouin scattering （SBS） threshold based on waveform variation of SBS optical limiting. The output waveforms for different pump power densities are numeric...This paper proposes a method for measuring the stimulated Brillouin scattering （SBS） threshold based on waveform variation of SBS optical limiting. The output waveforms for different pump power densities are numerically simulated, and validated in the Nd：YAG seed-injected laser system. The results indicate that SBS does not take place in the case of a low pump power density and thus the output power scales up linearly with pump power. Once the pump power density exceeds the SBS threshold, SBS takes place and thereby the energies are transferred from pump to Stokes. As a result, a small shoulder appears in the trailing edge of the output waveform, which provides another method to determine the SBS threshold.展开更多
Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scatteri...Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scattering in a single-mode fiber. The phase noise structure is analyzed for an interferometric fiber sensing system, and an unbalanced Michelson interferometer with an optical path difference of 1 m, as well as the phase-generated carrier technique, is used to measure the phase noise. It is found that the phase noise is small when the input power is below the stimulated Brillouin scattering threshold, increases dramatically at first and then gradually becomes flat when the input power is above the threshold, which is similar to the variation in relative intensity noise. It can be inferred that the increase in phase noise is mainly due to the broadening of the laser linewidth caused by stimulated Brillouin scattering, which is verified through linewidth measurements in the absence and presence of the stimulated Brillouin scattering.展开更多
The stimulated Brillouin scattering （SBS） threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier （YDFA） with a short large mode area fiber is theoretically and experimen...The stimulated Brillouin scattering （SBS） threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier （YDFA） with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 （26 W SBS threshold with single frequency seed）. The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.展开更多
A simple model is developed to study the mechanism of stimulated Brillouin scattering（SBS） suppression with frequency-modulated laser in optical fiber. By taking into account the laser frequency distribution along t...A simple model is developed to study the mechanism of stimulated Brillouin scattering（SBS） suppression with frequency-modulated laser in optical fiber. By taking into account the laser frequency distribution along the fiber induced by frequency modulation, the average effective Brillouin gain is calculated to determine the SBS threshold. Experimental results show agreement with the numerical analysis. The application for SBS suppression in interferometric fiber sensing system is also discussed in this paper. The results show that the maximum input power can be increased effectively by frequency modulation method.展开更多
A new method for measuring the threshold of stimulated Brillouin scattering （SBS） based on the generation location of a Stokes beam is proposed for the first time to our knowledge. The length of the medium cell is s...A new method for measuring the threshold of stimulated Brillouin scattering （SBS） based on the generation location of a Stokes beam is proposed for the first time to our knowledge. The length of the medium cell is selected to be longer than the free gain length of pump pulses in the Brillouin medium. The reflected light from a certain mirror in front of the medium cell is chosen as the reference beam, and the SBS threshold is measured by the ＂jump＂ of the delay between the Stokes beam and the reference beam. An 8-ns Q-switched single-longitudinal-mode pulse is used as the pump and the typical SBS medium FC-72 is selected as the nonlinear medium in our experiment. The SBS threshold intensity is measured to be 173-178 mW/cm2, which is consistent with existing results measured with the transmitted energy limiting method.展开更多
This paper investigates the effect of beam divergence angle on output waveform based on stimulated Brillouin scattering optical limiting.Output waveforms in the case of different pump divergence angles are numerically...This paper investigates the effect of beam divergence angle on output waveform based on stimulated Brillouin scattering optical limiting.Output waveforms in the case of different pump divergence angles are numerically simulated,and validated in a Nd：YAG seed-injected laser system.The results indicate that a small pump divergence angle can lead to good interaction between pump and Stokes,and a platform can be easily realized in the transmitted waveform.In contrast,a peak followed by the platform appears when the divergence angle becomes large.展开更多
The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity...The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity is, and the larger the phonon lifetime is. At a low pump power and a short focal length, we can derive a single-peak stimulated Brillouin scattering （SBS） pulse. The duration of this single-peak SBS pulse depends mainly on the phonon lifetime of water. With the increase of the water temperature, the duration of such a single-peak SBS pulse will become longer, and the SBS energy will become higher for the gain coefficient, which is related to the phonon lifetime. Therefore, varying the medium temperature can lead to the changes of SBS pulse duration and SBS energy.展开更多
For distributed fiber Raman amplifiers（DFRAs）, stimulated Brillouin scattering（SBS） can deplete the pump once occurring and consequently generate gain saturation. On the basis of such a theory, theoretical gain sa...For distributed fiber Raman amplifiers（DFRAs）, stimulated Brillouin scattering（SBS） can deplete the pump once occurring and consequently generate gain saturation. On the basis of such a theory, theoretical gain saturation powers in DFRAs with various pump schemes are obtained by calculating SBS thresholds in them, and the experimental results show that they are in excellent agreement with the calculation results. The saturation power of the DFRA with a 300 m W forward pump is as low as 0 d Bm, which needs to be enhanced by phase modulation, and the effect is quantitatively studied. A simple model taking both modulation frequency and index into consideration is presented by introducing a correction factor to evaluate the effect of phase modulation on the enhancement of saturation power. Experimentally, it is shown that such a correction factor decreases as the modulation frequency increases and approaches zero when the modulation frequency becomes high enough. In particular, a phase modulation with a modulation frequency of 100 MHz and a modulation index of 1.380 can enhance the saturation power by 4.44 d B, and the correction factor is 0.25 d B, in which the modulation frequency is high enough. Additionally, the factor is 1.767 d B for the modulation frequency of 25 MHz. On this basis,phase modulations with various indexes and a fixed frequency of 25 MHz are adopted to verify the modified model, and the results are positive. To obtain the highest gain saturation power, the model is referable. The research results provide a guide for the design of practical DFRAs.展开更多
Stimulated Brillouin scattering is studied by numerically solving the Vlasov Maxwell system. A cascade of stim- ulated Brillouin scattering can occur when a linearly polarized laser pulse propagates in a plasma. It is...Stimulated Brillouin scattering is studied by numerically solving the Vlasov Maxwell system. A cascade of stim- ulated Brillouin scattering can occur when a linearly polarized laser pulse propagates in a plasma. It is found that a stimulated Brillouin scattering cascade can reduce the scattering and increase the transmission of light, as well as intro- duce a bursting behaviour in the evolution of the laser-plasma interaction. The bursting time in the reflectivity is found to be less than half the ion acoustic period. The ion temperature can affect the stimulated Brillouin scattering cascade, which can repeat several times at low ion temperatures and can be completely eliminated at high ion temperatures. For stimulated Brillouin scattering saturation, higher-harmonic generation and wave wave interaction of the excited ion acoustic waves can restrict the amplitude of the latter. In addition, stimulated Brillouin scattering cascade can restrict. the amplitude of the scattered light.展开更多
timulated Brillouin Scattering(SBS), one of the important nonlinear optical effects in optical fiber transmission systems, was systemically studied by experiments. The relationship of SBS threshold characteristic with...timulated Brillouin Scattering(SBS), one of the important nonlinear optical effects in optical fiber transmission systems, was systemically studied by experiments. The relationship of SBS threshold characteristic with linewidth of light source and modulation formats was discussed, and approved by experiments. The effect of SBS on bite error rate characteristic of the system was also investigated experimentally.展开更多
In supersonic flowing plasmas,the auto-resonant behavior of ion acoustic waves driven by stimulated Brillouin backscattering is self-consistently investigated.A nature of absolute instability appears in the evolution ...In supersonic flowing plasmas,the auto-resonant behavior of ion acoustic waves driven by stimulated Brillouin backscattering is self-consistently investigated.A nature of absolute instability appears in the evolution of the stimulated Brillouin backscattering.By adopting certain form of incident lights combined by two perpendicular linear polarization lasers or polarization rotation lasers,the absolute instability is suppressed significantly.The suppression of auto-resonant stimulated Brillouin scattering is verified with the fully kinetic Vlasov code.展开更多
The effects of the nonlinear polarization in a partially stripped plasma on stimulated Brillouin scattering (SBS) process of a strong laser are discussed. A set of nonlineax mode coupling equations and the linear grow...The effects of the nonlinear polarization in a partially stripped plasma on stimulated Brillouin scattering (SBS) process of a strong laser are discussed. A set of nonlineax mode coupling equations and the linear growth rate of SBS instability is derived, respectively. When the intensity of an incident laser Io > 10^(17) W/cm^2, the third order susceptibility X(3) will reduce the above mentioned linear growth rate enormously. If taking the maximum value of the second order susceptibility X(2), the growth rate may be decreased observably when Io > 10_^(14)W/cm2. Furthermore, the nonlinear susceptibility can affect the nonlinear evolution of SBS much extensively.展开更多
Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order...Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order peak-power, SBS reflectivity tends to saturate when the fiber length exceeds a limit, named 'effective fiber length'. Using small core-diameter and long enough fiber, the SBS reflectivity level could be raised but is limited by optical damage of the entrance surface of the fiber. Therefore, just a small dynamic range can be obtained.展开更多
Distributed fiber sensors based on forward stimulated Brillouin scattering(F-SBS)have attracted special attention because of their capability to detect the acoustic impedance of liquid material outside fiber.However,t...Distributed fiber sensors based on forward stimulated Brillouin scattering(F-SBS)have attracted special attention because of their capability to detect the acoustic impedance of liquid material outside fiber.However,the reported results were based on the extraction of a 1st-order local spectrum,causing the sensing distance to be restricted by pump depletion.Here,a novel post-processing technique was proposed for distributed acoustic impedance sensing by extracting the 2nd-order local spectrum,which is beneficial for improving the sensing signal-to-noise ratio(SNR)significantly,since its pulse energy penetrates into the fiber more deeply.As a proof-of-concept,distributed acoustic impedance sensing along~1630 m fiber under moderate spatial resolution of~20 m was demonstrated.展开更多
The Brillouin characteristics of step-index Ge–As–Se–Te(GAST)fibers at 2μm are designed and simulated on the basis of optical and acoustic properties.The refractive indexes of Ge_(20)As_(20)Se_(45)Te_(15)glass and...The Brillouin characteristics of step-index Ge–As–Se–Te(GAST)fibers at 2μm are designed and simulated on the basis of optical and acoustic properties.The refractive indexes of Ge_(20)As_(20)Se_(45)Te_(15)glass and Ge_(20)As_(20)Se_(43)Te_(17)glass serving as fiber core and cladding are 3.20 and 3.18 at 2μm,and their acoustic velocities are 2200 m/s and 2300 m/s,respectively.Numerical results indicate that the stimulated Brillouin scattering(SBS)efficiency is 248 m^(-1)·W^(-1),and the Brillouin threshold power is 66 m W when the core diameter of the 2-m-long GAST fiber is 4μm at 2-μm wavelength.The optic–acoustic coupling factor,the Brillouin frequency shift,and the Brillouin gain coefficient are 0.98,7.02 GHz,and 3.81×10^(-9)m/W,respectively.The SBS effect of GAST fibers simulated for the first time provides a new promising approach to selecting gain medium based on 2-μm-wavelength fiber laser.展开更多
On-chip stimulated Brillouin scattering(SBS)has attracted extensive attention by introducing acousto-optic coupling interactions in all-optical signal processing systems.A series of chip-level applications such as Bri...On-chip stimulated Brillouin scattering(SBS)has attracted extensive attention by introducing acousto-optic coupling interactions in all-optical signal processing systems.A series of chip-level applications such as Brillouin lasers,amplifiers,gyroscopes,filters,and nonreciprocal devices are realized based on Brillouin acousto-optic interaction.Here,we first introduce the fundamental principle of SBS in integrated photonics and a method for calculating Brillouin gain;then we illustrate the Brillouin effect on different material platforms with diverse applications.Finally,we make a concise conclusion and offer prospects on the future developments of on-chip SBS.展开更多
The stimulated Brillouin scattering phase conjugation mirror (SBS-PCM) based on liquid media is widely used in high-power laser systems due to its robust thermal load capacity, high energy conversion efficiency and im...The stimulated Brillouin scattering phase conjugation mirror (SBS-PCM) based on liquid media is widely used in high-power laser systems due to its robust thermal load capacity, high energy conversion efficiency and improved beam quality. Nevertheless, with an increase in the pump repetition rate, thermally-induced blooming and optical breakdown can emerge, leading to distortions in the Stokes beam. In this study, we delved into the thermal effects in liquid SBS-PCMs employing hydrodynamic analysis, establishing a relationship between beam profile distortion and the thermal convection field. We calculated the temperature and convection velocity distribution based on the pump light parameters and recorded the corresponding beam profiles. The intensities of the beam profiles were modulated in alignment with the convection directions, reaching a velocity peak of 2.85 mm/s at a pump pulse repetition rate of 250 Hz. The residual sum of squares (RSS) was employed to quantify the extent of beam profile distortion relative to a Gaussian distribution. The RSS escalated to 7.8, in contrast to 0.7 of the pump light at a pump pulse repetition rate of 500 Hz. By suppressing thermal convection using a high-viscosity medium, we effectively mitigated beam distortion. The RSS was reduced to 0.7 at a pump pulse repetition rate of 500 Hz, coinciding with a twentyfold increase in viscosity, thereby enhancing the beam quality. By integrating hydrodynamic analysis, we elucidated and mitigated distortion with targeted solutions. Our research offers an interdisciplinary perspective on studying thermal effects and contributes to the application of SBS-PCMs in high-repetition-rate laser systems by unveiling the mechanism of photothermal effects.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos.11975059 and 12005021)。
文摘A novel scheme to suppress both stimulated Brillouin scattering(SBS) and stimulated Raman scattering(SRS) by combining an alternating frequency(AF) laser and a transverse magnetic field is proposed. The AF laser allows the laser frequency to change discretely and alternately over time. The suppression of SBS is significant as long as the AF difference is greater than the linear growth rate of SBS or the alternating time of the laser frequency is shorter than the linear growth time of SBS. However, the AF laser proves ineffective in suppressing SRS, which usually has a much higher linear growth rate than SBS. To remedy that, a transverse magnetic field is included to suppress the SRS instability. The electrons trapped in the electron plasma waves(EPWs) of SRS can be accelerated by the surfatron mechanism in a transverse magnetic field and eventually detrapped. While continuously extracting energy from EPWs, the EPWs are dissipated and the kinetic inflation of SRS is suppressed. The one-dimensional particle-in-cell simulation results show that both SBS and SRS can be effectively suppressed by combining the AF laser with a transverse magnetic field with tens of Tesla. The total reflectivity can be dramatically reduced by more than one order of magnitude. These results provide a potential reference for controlling SBS and SRS under the related parameters of inertial confinement fusion.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 60778019 and 60878005)the Program for New Century Excellent Talents in University (Grant No NCET-08-0173)the Program of Excellent Team in Harbin Institute of Technology and the Program of Science and Technology of the Education Bureau of Heilongjiang Province,China (Grant No11521048)
文摘This paper proposes a method for measuring the stimulated Brillouin scattering （SBS） threshold based on waveform variation of SBS optical limiting. The output waveforms for different pump power densities are numerically simulated, and validated in the Nd：YAG seed-injected laser system. The results indicate that SBS does not take place in the case of a low pump power density and thus the output power scales up linearly with pump power. Once the pump power density exceeds the SBS threshold, SBS takes place and thereby the energies are transferred from pump to Stokes. As a result, a small shoulder appears in the trailing edge of the output waveform, which provides another method to determine the SBS threshold.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61177073)the Open Fund of Key Laboratory of Optoelectronic Information and Sensing Technologies of Guangdong Higher Education Institutes, Jinan University, China (Grant No. gdol201101)+1 种基金the Fund of Innovation of Graduate School of NUDT, China (Grant No. B110703)Hunan Provincial Innovation Foundation for Postgraduate,China (Grant No. CX2011B033)
文摘Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scattering in a single-mode fiber. The phase noise structure is analyzed for an interferometric fiber sensing system, and an unbalanced Michelson interferometer with an optical path difference of 1 m, as well as the phase-generated carrier technique, is used to measure the phase noise. It is found that the phase noise is small when the input power is below the stimulated Brillouin scattering threshold, increases dramatically at first and then gradually becomes flat when the input power is above the threshold, which is similar to the variation in relative intensity noise. It can be inferred that the increase in phase noise is mainly due to the broadening of the laser linewidth caused by stimulated Brillouin scattering, which is verified through linewidth measurements in the absence and presence of the stimulated Brillouin scattering.
基金Supported by the National Natural Science Foundation of China under Grant Nos U1330134,61308024 and 11174305the National High-Technology Research and Development Program of China under Grant No 2014AA041901the Shanghai Natural Science Foundation under Grant No 11ZR1441400
文摘The stimulated Brillouin scattering （SBS） threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier （YDFA） with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 （26 W SBS threshold with single frequency seed）. The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.
基金Project supported by the National Natural Science Foudation of China(Grant No.6177073)
文摘A simple model is developed to study the mechanism of stimulated Brillouin scattering（SBS） suppression with frequency-modulated laser in optical fiber. By taking into account the laser frequency distribution along the fiber induced by frequency modulation, the average effective Brillouin gain is calculated to determine the SBS threshold. Experimental results show agreement with the numerical analysis. The application for SBS suppression in interferometric fiber sensing system is also discussed in this paper. The results show that the maximum input power can be increased effectively by frequency modulation method.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61008005 and 61138005)the China Post-doctoral Science Special Foundation (Grant No. 201003428)the Doctoral Fund of Ministry of Education of China (Grant No. 20102302120030)
文摘A new method for measuring the threshold of stimulated Brillouin scattering （SBS） based on the generation location of a Stokes beam is proposed for the first time to our knowledge. The length of the medium cell is selected to be longer than the free gain length of pump pulses in the Brillouin medium. The reflected light from a certain mirror in front of the medium cell is chosen as the reference beam, and the SBS threshold is measured by the ＂jump＂ of the delay between the Stokes beam and the reference beam. An 8-ns Q-switched single-longitudinal-mode pulse is used as the pump and the typical SBS medium FC-72 is selected as the nonlinear medium in our experiment. The SBS threshold intensity is measured to be 173-178 mW/cm2, which is consistent with existing results measured with the transmitted energy limiting method.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 60778019 and 60878005)the Program for New Century Excellent Talents in University of China (Grant No NCET-08-0173)the Program of Excellent Team in Harbin Institute of Technology of China
文摘This paper investigates the effect of beam divergence angle on output waveform based on stimulated Brillouin scattering optical limiting.Output waveforms in the case of different pump divergence angles are numerically simulated,and validated in a Nd：YAG seed-injected laser system.The results indicate that a small pump divergence angle can lead to good interaction between pump and Stokes,and a platform can be easily realized in the transmitted waveform.In contrast,a peak followed by the platform appears when the divergence angle becomes large.
文摘The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity is, and the larger the phonon lifetime is. At a low pump power and a short focal length, we can derive a single-peak stimulated Brillouin scattering （SBS） pulse. The duration of this single-peak SBS pulse depends mainly on the phonon lifetime of water. With the increase of the water temperature, the duration of such a single-peak SBS pulse will become longer, and the SBS energy will become higher for the gain coefficient, which is related to the phonon lifetime. Therefore, varying the medium temperature can lead to the changes of SBS pulse duration and SBS energy.
基金Project supported by the National Natural Science Foundation of China(Grant No.61177073)the Major Application Basic Research Project of National University of Defense Technology,China(Grant No.ZDYYJCYJ20140701)
文摘For distributed fiber Raman amplifiers（DFRAs）, stimulated Brillouin scattering（SBS） can deplete the pump once occurring and consequently generate gain saturation. On the basis of such a theory, theoretical gain saturation powers in DFRAs with various pump schemes are obtained by calculating SBS thresholds in them, and the experimental results show that they are in excellent agreement with the calculation results. The saturation power of the DFRA with a 300 m W forward pump is as low as 0 d Bm, which needs to be enhanced by phase modulation, and the effect is quantitatively studied. A simple model taking both modulation frequency and index into consideration is presented by introducing a correction factor to evaluate the effect of phase modulation on the enhancement of saturation power. Experimentally, it is shown that such a correction factor decreases as the modulation frequency increases and approaches zero when the modulation frequency becomes high enough. In particular, a phase modulation with a modulation frequency of 100 MHz and a modulation index of 1.380 can enhance the saturation power by 4.44 d B, and the correction factor is 0.25 d B, in which the modulation frequency is high enough. Additionally, the factor is 1.767 d B for the modulation frequency of 25 MHz. On this basis,phase modulations with various indexes and a fixed frequency of 25 MHz are adopted to verify the modified model, and the results are positive. To obtain the highest gain saturation power, the model is referable. The research results provide a guide for the design of practical DFRAs.
基金Project supported by the Science and Technology Funds of China Academy of Engineering Physics(Grant Nos.2010B0102018 and 2010A0102004)the National Basic Research Program of China(Grant No.2010CB832904)the National Natural Science Foundation of China(Grant Nos.10975023,10835003 and 10935003)
文摘Stimulated Brillouin scattering is studied by numerically solving the Vlasov Maxwell system. A cascade of stim- ulated Brillouin scattering can occur when a linearly polarized laser pulse propagates in a plasma. It is found that a stimulated Brillouin scattering cascade can reduce the scattering and increase the transmission of light, as well as intro- duce a bursting behaviour in the evolution of the laser-plasma interaction. The bursting time in the reflectivity is found to be less than half the ion acoustic period. The ion temperature can affect the stimulated Brillouin scattering cascade, which can repeat several times at low ion temperatures and can be completely eliminated at high ion temperatures. For stimulated Brillouin scattering saturation, higher-harmonic generation and wave wave interaction of the excited ion acoustic waves can restrict the amplitude of the latter. In addition, stimulated Brillouin scattering cascade can restrict. the amplitude of the scattered light.
文摘timulated Brillouin Scattering(SBS), one of the important nonlinear optical effects in optical fiber transmission systems, was systemically studied by experiments. The relationship of SBS threshold characteristic with linewidth of light source and modulation formats was discussed, and approved by experiments. The effect of SBS on bite error rate characteristic of the system was also investigated experimentally.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11875091 and 11975059)the Science Challenge Project,China(Grant No.TZ2016005).
文摘In supersonic flowing plasmas,the auto-resonant behavior of ion acoustic waves driven by stimulated Brillouin backscattering is self-consistently investigated.A nature of absolute instability appears in the evolution of the stimulated Brillouin backscattering.By adopting certain form of incident lights combined by two perpendicular linear polarization lasers or polarization rotation lasers,the absolute instability is suppressed significantly.The suppression of auto-resonant stimulated Brillouin scattering is verified with the fully kinetic Vlasov code.
文摘The effects of the nonlinear polarization in a partially stripped plasma on stimulated Brillouin scattering (SBS) process of a strong laser are discussed. A set of nonlineax mode coupling equations and the linear growth rate of SBS instability is derived, respectively. When the intensity of an incident laser Io > 10^(17) W/cm^2, the third order susceptibility X(3) will reduce the above mentioned linear growth rate enormously. If taking the maximum value of the second order susceptibility X(2), the growth rate may be decreased observably when Io > 10_^(14)W/cm2. Furthermore, the nonlinear susceptibility can affect the nonlinear evolution of SBS much extensively.
文摘Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order peak-power, SBS reflectivity tends to saturate when the fiber length exceeds a limit, named 'effective fiber length'. Using small core-diameter and long enough fiber, the SBS reflectivity level could be raised but is limited by optical damage of the entrance surface of the fiber. Therefore, just a small dynamic range can be obtained.
基金Project supported by the Sichuan Science and Technology Program(Grant No.2019YJ0530)Scientific Research Fund of Sichuan Provincial Education Department,China(Grant No.18ZA0401)the National Natural Science Foundation of China(Grant No.61205079).
文摘Distributed fiber sensors based on forward stimulated Brillouin scattering(F-SBS)have attracted special attention because of their capability to detect the acoustic impedance of liquid material outside fiber.However,the reported results were based on the extraction of a 1st-order local spectrum,causing the sensing distance to be restricted by pump depletion.Here,a novel post-processing technique was proposed for distributed acoustic impedance sensing by extracting the 2nd-order local spectrum,which is beneficial for improving the sensing signal-to-noise ratio(SNR)significantly,since its pulse energy penetrates into the fiber more deeply.As a proof-of-concept,distributed acoustic impedance sensing along~1630 m fiber under moderate spatial resolution of~20 m was demonstrated.
基金the National Natural Science Foundation of China(Grant Nos.61875094 and 62090064)the China Postdoctoral Science Foundation(Grant No.2018M642386)the K.C.Wong Magna Fund in Ningbo University。
文摘The Brillouin characteristics of step-index Ge–As–Se–Te(GAST)fibers at 2μm are designed and simulated on the basis of optical and acoustic properties.The refractive indexes of Ge_(20)As_(20)Se_(45)Te_(15)glass and Ge_(20)As_(20)Se_(43)Te_(17)glass serving as fiber core and cladding are 3.20 and 3.18 at 2μm,and their acoustic velocities are 2200 m/s and 2300 m/s,respectively.Numerical results indicate that the stimulated Brillouin scattering(SBS)efficiency is 248 m^(-1)·W^(-1),and the Brillouin threshold power is 66 m W when the core diameter of the 2-m-long GAST fiber is 4μm at 2-μm wavelength.The optic–acoustic coupling factor,the Brillouin frequency shift,and the Brillouin gain coefficient are 0.98,7.02 GHz,and 3.81×10^(-9)m/W,respectively.The SBS effect of GAST fibers simulated for the first time provides a new promising approach to selecting gain medium based on 2-μm-wavelength fiber laser.
基金supported by the National Natural Science Foundation of China(Nos.61875063 and 62175074)。
文摘On-chip stimulated Brillouin scattering(SBS)has attracted extensive attention by introducing acousto-optic coupling interactions in all-optical signal processing systems.A series of chip-level applications such as Brillouin lasers,amplifiers,gyroscopes,filters,and nonreciprocal devices are realized based on Brillouin acousto-optic interaction.Here,we first introduce the fundamental principle of SBS in integrated photonics and a method for calculating Brillouin gain;then we illustrate the Brillouin effect on different material platforms with diverse applications.Finally,we make a concise conclusion and offer prospects on the future developments of on-chip SBS.
基金supported by the National Natural Science Foundation of China (Nos. 61927815 and 62075056)the Natural Science Foundation of Tianjin City (No. 22JCYBJC01100)+2 种基金the Natural Science Foundation of Hebei Province (No. F2023202063)the Funds for Basic Scientific Research of Hebei University of Technology (No. JBKYTD2201)support from the Shijiazhuang Overseas Talents Introduction Project (No. 20230004)
文摘The stimulated Brillouin scattering phase conjugation mirror (SBS-PCM) based on liquid media is widely used in high-power laser systems due to its robust thermal load capacity, high energy conversion efficiency and improved beam quality. Nevertheless, with an increase in the pump repetition rate, thermally-induced blooming and optical breakdown can emerge, leading to distortions in the Stokes beam. In this study, we delved into the thermal effects in liquid SBS-PCMs employing hydrodynamic analysis, establishing a relationship between beam profile distortion and the thermal convection field. We calculated the temperature and convection velocity distribution based on the pump light parameters and recorded the corresponding beam profiles. The intensities of the beam profiles were modulated in alignment with the convection directions, reaching a velocity peak of 2.85 mm/s at a pump pulse repetition rate of 250 Hz. The residual sum of squares (RSS) was employed to quantify the extent of beam profile distortion relative to a Gaussian distribution. The RSS escalated to 7.8, in contrast to 0.7 of the pump light at a pump pulse repetition rate of 500 Hz. By suppressing thermal convection using a high-viscosity medium, we effectively mitigated beam distortion. The RSS was reduced to 0.7 at a pump pulse repetition rate of 500 Hz, coinciding with a twentyfold increase in viscosity, thereby enhancing the beam quality. By integrating hydrodynamic analysis, we elucidated and mitigated distortion with targeted solutions. Our research offers an interdisciplinary perspective on studying thermal effects and contributes to the application of SBS-PCMs in high-repetition-rate laser systems by unveiling the mechanism of photothermal effects.
