In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial e...In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial element that alleviates plant stress. Most studies involving silicon have focused on physiological responses, such as improvements in photosynthetic processes, water use efficiency, and antioxidant defense systems. But recent research suggests that stressed plants facing either limited or excessive resources(water, light, nutrients, and toxic elements), strategically employ Si to maintain C:N:P homeostasis, thereby minimizing biomass losses. Understanding the role of Si in mitigating the impact of abiotic stresses on plants by regulating C:N:P homeostasis holds great potential for advancing sustainable agricultural practices in crop production. This review presents recent advances in characterizing the influence of environmental stresses on C:N:P homeostasis, as well as the role of Si in preserving C:N:P equilibrium and attenuating biological damage associated with abiotic stress. It underscores the beneficial effects of Si in sustaining C:N:P homeostasis and increasing yield via improved nutritional efficiency and stress mitigation.展开更多
Boulder spacing in mountain rivers and near-wake flow zones within the boulder array is very useful for fish habitat and growth of aquatic organisms.The present study aims to investigate how the boulder array and spac...Boulder spacing in mountain rivers and near-wake flow zones within the boulder array is very useful for fish habitat and growth of aquatic organisms.The present study aims to investigate how the boulder array and spacing influence the near-bed flow structures in a gravel-bed stream.Boulders are staggered over a gravel-bed stream with three different inter-boulder spacing namely(a)large(b)medium and(c)small spacing.An acoustic Doppler velocimeter was used for flow measurements in a rectangular channel and the results were compared with those acquired from numerical simulation.The time-averaged velocity profiles at the near-wake flow zones of boulders experience maximum flow retardation which is an outcome of the boulder-induced form roughness.The ratio of velocity differences associated to form and skin roughness and its positive magnitude reveals the dominance of form roughness closest to the boulders.Form roughness computed is 1.75 to 2 times higher than the skin roughness at the near-wake flow region.In particular,the collective immobile boulders placed at different inter-boulder spacings developed high and low bed shear stresses closest to the boulders.The low bed shear stresses characterised by a secondary peak developed at the trough location of the boulders is attributed to the skin shear stress.Further,the spatial averaging of time-averaged flow quantities gives additional impetus to present an improved illustration of fluid shear stresses.The formation of form-induced shear stress is estimated to be 17%to 23%of doubleaveraged Reynolds shear stress and partially compensates for the damping of time-averaged Reynolds shear stress in the interfacial sub-layer.The quadrant analysis of spatial velocity fluctuations depicts that the form-induced shear stresses are dominant in the interfacial sub-layer and have no significance above the gravel-bed surface.展开更多
Reverse shoulder arthroplasty (RSA) is an effective treatment for rotator cuff tears. Despite its advantages, complications occur at a high rate. Complications requiring revision include a high rate of base plate fail...Reverse shoulder arthroplasty (RSA) is an effective treatment for rotator cuff tears. Despite its advantages, complications occur at a high rate. Complications requiring revision include a high rate of base plate failure, 38% of which are due to instability. The primary stability the base plate ensures is a crucial factor and, thus, is the subject of much debate in clinical studies and biomechanical research. This study is aimed to provide data that will contribute to the base plate’s pri-mary stability and glenoid longevity by clarifying the stresses at the scapular fossa and base plate interface associated with elevation after RSA. A 3D finite element model was created from the DICOM data for the scapulohumeral joint and SMR shoulder system. For loading conditions, 30 N was applied for each posi-tion with abduction angles of 0, 45, 90, and 135 degrees. A three-dimensional fi-nite element analysis was performed using the static implicit method with LS-DYNA. The von Mises stresses in the scapular fossa were found not to exceed the yield stress on the bone even after elevation to an abduction angle of 135 de-grees after RSA. It is rough to uniformly compare the yield stress and the von Mises stress, but it was inferred that the possibility of fracture is low unless a large external force is applied. A maximum von Mises stress showed 0 degrees of abduction, suggesting that the lowered position is in a more severe condition than the elevated position. If better improvement is desired, it may be necessary to devise ways to reduce the stress on the upper screw. .展开更多
Drought-induced protein 19(Di19) is a Cys2/His2 zinc-finger protein that functions in plant growth and development and in tolerance to abiotic stresses.Gm PUB21,an E3 ubiquitin ligase,negatively regulates drought and ...Drought-induced protein 19(Di19) is a Cys2/His2 zinc-finger protein that functions in plant growth and development and in tolerance to abiotic stresses.Gm PUB21,an E3 ubiquitin ligase,negatively regulates drought and salinity response in soybean.We identified potential interaction target proteins of Gm PUB21by yeast two-hybrid c DNA library screening,Gm Di19-5 as a candidate.Bimolecular fluorescence complementation and glutathionine-S-transferase pull-down assays confirmed the interaction between Gm Di19-5 and Gm PUB21.Gm Di19-5 was induced by Na Cl,drought,and abscisic acid(ABA) treatments.Gm Di19-5 was expressed in the cytoplasm and nucleus.Gm Di19-5 overexpression conferred hypersensitivity to drought and high salinity,whereas Gm Di19-5 silencing increased drought and salinity tolerance.Transcripts of ABA-and stress response-associated genes including Gm RAB18 and Gm DREB2A were downregulated in Gm Di19-5-overexpressing plants under drought and salinity stresses.ABA decreased the protein level of Gm Di19-5 in vivo,whereas Gm PUB21 increased the decrease of Gm Di19-5 after exogenous ABA application.The accumulation of Gm PUB21 was also inhibited by Gm Di19-5.We conclude that Gm PUB21 and Gm Di19-5 collaborate to regulate drought and salinity tolerance via an ABA-dependent pathway.展开更多
The effect of intermediate stress(in situ tunnel axial)on a strainburst is studied with a threedimensional(3D)bonded block distinct element method(DEM).A series of simulations of strainbursts under true triaxial in si...The effect of intermediate stress(in situ tunnel axial)on a strainburst is studied with a threedimensional(3D)bonded block distinct element method(DEM).A series of simulations of strainbursts under true triaxial in situ stress conditions(i.e.high tangential stress,moderate intermediate stress and low radial stress)of near-boundary rock masses are performed.Compared with the experimental results,the DEM model is able to capture the stress-strain response,failure pattern and energy balance of strainbursts.The fracturing processes of strainbursts are also numerically reproduced.Numerical results show that,as the intermediate stress increases:(1)The peak strain of strainbursts increases,the yield stress increases,the rock strength increases linearly,and the ratio of yield stress to rock strength decreases,indicating that the precursory information on strainbursts is enhanced;(2)Tensile and shear cracks increase significantly,and slabbing and bending of rock plates are more pronounced;and(3)The stored elastic strain energy and dissipated energy increase linearly,whereas the kinetic energy of the ejected rock fragments increases approximately exponentially,implying an increase in strainburst intensity.By comparing the experimental and numerical results,the effect of intermediate stress on the rock strength of strainbursts is discussed in order to address three key issues.Then,the Mogi criterion is applied to construct new strength criteria for strainbursts by converting the one-face free true triaxial stress state of a strainburst to its equivalent true triaxial stress state.In summary,the effect of intermediate stress on strainbursts is a double-edged sword that can enhance the rock strength and the precursory information of a strainburst,but also increase its intensity.展开更多
Trehalose and its precursor,trehalose-6-phosphate,play critical roles in plant metabolism and response to abiotic stresses.Trehalose-6-phosphate synthase(TPS)is a key enzyme in the trehalose synthesis pathway.Hence th...Trehalose and its precursor,trehalose-6-phosphate,play critical roles in plant metabolism and response to abiotic stresses.Trehalose-6-phosphate synthase(TPS)is a key enzyme in the trehalose synthesis pathway.Hence this study identified TPS genes in sesame(SiTPSs)and examined their expression patterns under various abiotic stresses.Totally,ten SiTPSs were identified and comprehensively characterized.SiTPSs were found to be unevenly distributed on five out of 13 sesame chromosomes and were predicted to be localized in chloroplasts and vacuoles of cells.Phylogenetic analysis classified SiTPS proteins into two groups(I and II),which was supported by gene structure and conserved motif analyses.Analysis of cis-acting elements in promoter regions of SiTPSs revealed that they might primarily involve developmental and environmental responses.SiTPSs exhibited different expression patterns in different tissues and under different abiotic stresses.Most group II SiTPS genes(SiTPS4-SiTPS10)were strongly induced by drought,salt,waterlogging,and osmotic stress.Particularly,SiTPS10 was the most significantly up-regulated under various abiotic stresses,indicating it is a candidate gene for improving sesame tolerance to multiple abiotic stresses.Our results provide insight into the TPS gene family in sesame and fundamental resources for genomics studies towards dissecting SiTPS genes’functions.展开更多
Nitraria sibirica Pall.is an important shrub with a strong salt-alkali tolerance,but the mechanism underlying this tolerance remains obscure.In this study,N.sibirica,with salt-sensitive Vigna radiata(Linn.)Wilczek as ...Nitraria sibirica Pall.is an important shrub with a strong salt-alkali tolerance,but the mechanism underlying this tolerance remains obscure.In this study,N.sibirica,with salt-sensitive Vigna radiata(Linn.)Wilczek as the control,was subjected to transient salt stress(100 mM NaCl),alkali stress(50 mM Na_(2)CO_(3)),and osmotic stress(175 mM mannitol).The ionic fluxes of Na^(+)and K^(+)in the root apical region were measured.Results show that,under salt and alkali stress,N.sibirica roots exhibited higher capacities to limit Na+influx and reduce K+efflux,thereby resulting in lower Na^(+)/K^(+)ratios compared with V.radiata roots.Alkali stress induced stronger Na^(+)influx and K+efflux in the root salt stress treatment;Na^(+)influx was mainly observed in the root cap,while K^(+)efflux was mainly observed in the elongation zone.While under osmotic stress,N.sibirica roots showed stronger Na+efflux and weaker K+efflux than V.radiata roots.Na+efflux was mainly observed in the root elongation zone,while K+efflux was in the root cap.These results reveal the ionic strategy of N.sibirica in response to transient salt,alkali,and osmotic stresses through the regulation of Na+/K+flux homeostasis.展开更多
This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius ...This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.展开更多
Peptide transport is important for plant tissues where rapid proteolysis occurs,especially during germination and senescence,to enhance redistribution of organic nitrogen(N).However,the biological role of peptide tran...Peptide transport is important for plant tissues where rapid proteolysis occurs,especially during germination and senescence,to enhance redistribution of organic nitrogen(N).However,the biological role of peptide transporters is poorly investigated in rice.We characterized the function of the peptide transporter OsNPF8.1 of rice nitrate transporter 1/peptide transporter family(NPF).Ectopic expression of OsNPF8.1 in yeast revealed that OsNPF8.1 encoded a high-affinity di-/tri-peptide transporter,and the osnpf8.1 mutants had a lower uptake rate of the fluorescent-labelled dipeptide c in leaves of rice seedlings.Histochemical assays showed that OsNPF8.1 was highly expressed in mesophyll cells and vascular parenchyma cells,but not detected in root hairs and epidermises.Expression of OsNPF8.1 was induced by N deficiency,drought,Na Cl and abscisic acid,and kept at a high level in senescing leaves.Under N deficiency conditions,compared with the wild type Zhonghua 11,the osnpf8.1 mutants grew slower at the seedling stage,and had lower grain yield and lower N content in the grains.In contrast,OsNPF8.1-over-expressing rice(OsNPF8.1-OE)grew faster at the seedling stage and had a higher grain yield.The osnpf8.1 seedlings were less tolerant to salt and drought stresses.These results suggested that stress-induced organic N transportation mediated by OsNPF8.1 might contribute to balance plant growth and tolerate to salt/drought stress and N-deficiency.展开更多
Magnesium(Mg)single crystal specimens with three different orientations were prepared and tested from room temperature to 733 K in order to systematically evaluate effects of temperature on the critical resolved shear...Magnesium(Mg)single crystal specimens with three different orientations were prepared and tested from room temperature to 733 K in order to systematically evaluate effects of temperature on the critical resolved shear stress(CRSS)of slips and twinning in Mg single crystals.The duplex non-basal slip took place in the temperature range from 613 to 733 K when the single crystal samples were stretched along the<0110>direction.In contrast,the single basal slip and prismatic slip were mainly activated in the temperature range from RT to 733 K when the tensile directions were inclined at an angle of 45°with the basal and the prismatic plane,respectively.Viscoplastic self-consistent(VPSC)crystal modeling simulations with genetic algorithm code(GA-code)were carried out to obtain the best fitted CRSSs of major deformation modes,such as basal slip,prismatic slip,pyramidalⅡ,{1012}tensile twinning and{1011}compressive twinning when duplex slips accommodated deformation.Additionally,CRSSs of the basal and the prismatic slip were derived using the Schmid factor(SF)criterion when the single slip mainly accommodated deformation.From the CRSSs of major deformation modes obtained by the VPSC simulations and the SF calculations,the CRSSs for basal slip and{1012}tensile twinning were found to show a weak temperature dependence,whereas those for prismatic,slip and{1011}compressive twinning exhibited a strong temperature dependence.From the comparison of previous results,VPSC-GA modeling was proved to be an effective method to obtain the CRSSs of various deformation modes of Mg and its alloys.展开更多
Stamping is a critical step in the manufacture of metallic bipolar plates.Typically,residual stress and a spring back effect appear on the bipolar plate after the stamping process,which impacts on the performance and ...Stamping is a critical step in the manufacture of metallic bipolar plates.Typically,residual stress and a spring back effect appear on the bipolar plate after the stamping process,which impacts on the performance and lifetime of the proton exchange membrane fuel cell(PEMFC).The residual stress and spring back behavior which occur as a result of stamping a bipolar plate are investigated in this study.The effects of the punch radius,the die radius,the channel depth,and the clearance between the punch and the die on the residual stress and forming quality of the bipolar plate are examined.The stamping process can be divided into three stages.The high stress area and the middle section residual stress area were selected to study the formation process and to obtain the composition of the residual stress regions.Spring back was mainly related to the position of the fixed end of the sheet and the degree of plastic deformation,and the sheet thickness have increased by 2μm after spring back.Based on the results of finite element analysis,as described by the distribution of residual stress,the formation,the thickness of the middle cross section and the equivalent plastic strain,it was found that all the tool parameters affected the distribution of the residual stress.This research can provide a design reference for the manufacture of metallic bipolar plates based on the stamping process.展开更多
Gas diffusion in the shale matrix has a dominant effect on late-stage production from shale gas reservoirs.However,adequate research on the mechanisms and contributions of gas diffusion for varied pore size population...Gas diffusion in the shale matrix has a dominant effect on late-stage production from shale gas reservoirs.However,adequate research on the mechanisms and contributions of gas diffusion for varied pore size populations in shale matrix under recreated in situ stress is lacking.We report gas-diffusion measurements under constant in situ stress but variable gas pressures for contrasting non-adsorbent(helium(He))and adsorbed(methane(CH_(4)))gases to investigate the impact of effective stress on the evolution of dominant mechanisms of diffusion.An intact sample replicates true pore-network topology and diffusion paths.An integrated diffusion model is proposed that combines the effects of slip flow,Knudsen flow,and surface diffusion to constrain the evolution of these flow regimes and their respective contributions to the observational data.Finally,a probability density function(PDF)is employed to separate the gas content distributions of macropores and micropores from the total gas content and to investigate gas contributions in various pores.The results reveal that the diffusion coefficients of both He and CH_(4) in macropores and micropores increase with gas pressure but decrease with increasing effective stress.The diffusion coefficients of He and CH_(4) are different in macropores but remain nearly the same in micropores.The diffusion coefficients of slip flow and surface diffusion increase with decreasing effective stress except for CH_(4) diffusion in the micropores,while the evolution of Knudsen diffusion shows the opposite trend.Slip flow plays a dominant role in He and CH_(4) diffusion within macropores(pore size 45 nm).Knudsen diffusion gradually becomes significant for He diffusion in the micropores(pore size 4 nm),conversely,for CH_(4) diffusion in the micropores,surface diffusion becomes significant.Related to gas production from reservoirs,the contributions of the micropores will increase gradually with the duration of gas recovery,indicating the significant role of gas diffusion in micropores to steady supply during latestage production.展开更多
When expansive soils in the original location are artificially transferred to landfill in different seasons,and subject to engineering activities afterwards,the corresponding deformation and stability of retaining str...When expansive soils in the original location are artificially transferred to landfill in different seasons,and subject to engineering activities afterwards,the corresponding deformation and stability of retaining structures become unpredictable.This necessitates the determination of lateral pressure coefficient at rest(k_(0) value)for expansive soils in landfill.Considering compaction,excavation of expansive soils,as well as construction of landfill in different seasons,series of stepwise loading and unloading consolidation tests at various moisture contents were carried out in this work to explore the evolution characteristics of k_(0) value and assess the dependence of k_(0) value on vertical stress and moisture content.Besides,scanning electron microscope(SEM)was used to track the change in microstructural features with vertical stresses.The results indicated that the k_(0) value of expansive soil shows a pronounced nonlinearity and is inextricably linked with vertical stress and moisture content,based on which a prediction formula to estimate the variation in k_(0) value with vertical stress during loading stage was proposed;there is a significant exponential increase in k_(0) value with overconsolidation ratio(OCR)during unloading stage,and OCR dominates the release of horizontal stress of expansive soil;SEM results revealed that with an increase in vertical stress,the anisotropy of expansive soil microstructure increases dramatically,causing a significant directional readjustment,which is macroscopically manifested as an initially rapid increase in k_(0) value;but when vertical stress increases to a critical value,the anisotropy of microstructure increases marginally,indicating a stable orientation occurring in the soil microstructure,which causes the k_(0) value to maintain a relatively stable value.展开更多
Crack initiation stress and crack damage stress are two critical indices for assessing the fracture strength of rock mass.However,understanding the stress characteristics of crack initiation and damage under triaxial ...Crack initiation stress and crack damage stress are two critical indices for assessing the fracture strength of rock mass.However,understanding the stress characteristics of crack initiation and damage under triaxial compression remains still immature.To address this problem,by acoustic monitoring,i.e.ultrasonic wave transmission and acoustic emission(AE),the integrated triaxial compression experiments were carried out on granitic specimens.The crack initiation and damage stresses were determined by wave velocity,wave amplitude and AE methods,respectively.The discrepancy of stresses for crack initiation and damage identified by these methods were examined.Results showed that the confinement affected the peak stress and corresponding strain,and these two parameters increased with increasing confining pressure.The ultrasonic wave velocity and wave amplitude first increased and then remained relatively stable,and finally decreased with increasing axial compressive stress.The number of AE events stayed at a relatively low extent until axial stress approached the peak;after that,the AE accumulative counts skyrocketed to the maximum.It also shows that for a given confinement,the stresses for crack initiation and damage identified by the wave amplitude method were the smallest,followed those by AE method and wave velocity method.Moreover,the stresses for crack initiation and crack damage identified by these methods increased generally with confining pressures.However,the rate of increment of these two crack stresses decreased with increasing confining pressure.In addition,the slight decrease in these two crack stresses ratios was noticed with increasing confining pressure.The findings are helpful to understand the crack stresses of deep rocks,in terms of support of deep underground engineering.展开更多
The current paper focuses on the prediction of residual stresses and distortions in the Laser Powder Bed Fusion(LPBF)built Ti6Al4V thin-walled geometries using Ansys Additive Print(AAP)software which employs a layer-b...The current paper focuses on the prediction of residual stresses and distortions in the Laser Powder Bed Fusion(LPBF)built Ti6Al4V thin-walled geometries using Ansys Additive Print(AAP)software which employs a layer-by-layer accumulation of inherent strain to calculate the deformations.Isotropic and anisotropic strain scaling factors were calibrated initially within the APP software for the Ti6Al4V based single cantilever beam geometry.Subsequently,the numerical simulations were performed in APP software and computed the residual stresses and distortions for the varied process parameters including laser power,scan speed and hatch distance while maintaining the layer thickness constant for all the design iterations.The numerical predictions were compared;they were found to match reasonably well with the XRD measurements within the calibrated regime.展开更多
The cavitation dynamics and mechanical stress in viscoelastic tissues, as the primary mechanisms of some ultrasound therapies, are extremely complex due to the interactions of cavitation bubble with adjacent bubbles a...The cavitation dynamics and mechanical stress in viscoelastic tissues, as the primary mechanisms of some ultrasound therapies, are extremely complex due to the interactions of cavitation bubble with adjacent bubbles and surrounding tissues.Therefore, the cavitation dynamics and resultant mechanical stress of two-interacting bubbles in the viscoelastic tissues are numerically investigated, especially focusing on the effects of the adjacent bubble. The results demonstrate that the mechanical stress is highly dependent on the bubble dynamics. The compressive stress and tensile stress are generated at the stage of bubble expansion and collapse stage, respectively. Furthermore, within the initial parameters examined in this paper, the effects of the adjacent bubble will distinctly suppress the radial expansion of the small bubble and consequently lead its associated stresses to decrease. Owing to the superimposition of two stress fields, the mechanical stresses surrounding the small bubble in the direction of the neighboring bubble are smaller than those in other directions. For two interacting cavitation bubbles, the suppression effects of the nearby bubble on both the cavitation dynamics and the stresses surrounding the small bubble increase as the ultrasound amplitude and the initial radius of the large bubble increase, whereas they decrease with the inter-bubble distance increasing. Moreover, increasing the tissue viscoelasticity will reduce the suppression effects of the nearby bubble, except in instances where the compressive stress and tensile stress first increase and then decrease with the tissue elasticity and viscosity increasing respectively. This study can provide a further understanding of the mechanisms of cavitation-associated mechanical damage to the adjacent tissues or cells.展开更多
The zinc finger homeodomain(ZF-HD)genes belong to the homeobox gene family,playing critical roles in flower development and stress response.Despite their importance,however,to date there has been no genome-wide identi...The zinc finger homeodomain(ZF-HD)genes belong to the homeobox gene family,playing critical roles in flower development and stress response.Despite their importance,however,to date there has been no genome-wide identification and characterization of the ZF-HD genes that are probably involved in stress responses in maize.In this study,24 ZF-HD genes were identified,and their chromosomal locations,protein properties,duplication patterns,structures,conserved motifs and expression patterns were investigated.The results revealed that the ZF-HD genes are unevenly distributed on nine chromosomes and that most of these genes lack introns.Six and two ZF-HD genes have undergone segmental and tandem duplication,respectively,during genome expansion.These 24 ZF-HD transcription factors were classified into six major groups on the basis of protein molecular evolutionary relationship.The expression profiles of these genes in different tissues were evaluated,resulting in producing two distinct clusters.ZF-HD genes are preferentially expressed in reproductive tissues.Furthermore,expression profiles of the 24 ZF-HD genes in response to different kinds of stresses revealed that ten genes were simultaneously up-regulated under ABA,salt and PEG treatments;meanwhile four genes were simultaneously down-regulated.These findings will pave the way for deciphering the function and mechanism of ZF-HD genes on how to implicate in abiotic stress.展开更多
The issue of determining the maximum compressive residual stress that can be induced through mechanical surface treatment is of great significance.There are two possible approaches,namely stress peening and stress rol...The issue of determining the maximum compressive residual stress that can be induced through mechanical surface treatment is of great significance.There are two possible approaches,namely stress peening and stress rolling,both to determine the limit.Steel with high hardness may be under the yield strength,while for those with lower tensile strength,the hardness is increased,and the limit is above the tensile strength.展开更多
Rolling path squeezes and rolling residual stresses of large diameter circular saw body for wood, generated by rolling pressure from 10 up to 120 bar were examined. X-ray diffraction, Barkhausen noise (BN) and Full Wi...Rolling path squeezes and rolling residual stresses of large diameter circular saw body for wood, generated by rolling pressure from 10 up to 120 bar were examined. X-ray diffraction, Barkhausen noise (BN) and Full Width of the peak at a Half Maximum (FWHM) (o) methods for evaluation of residual stresses were used. Dependencies of a tangential rolling residual stresses inside rolling paths upon rolling pressure p (bar) and rolling area A (mm2) were evaluated. The rolling pressure, as large as 60 bar, resulting in the rolling squeeze as high as 0.04 mm2, and, tangential residual compression stresses inside a rolling path, as large as ?TI = ?822 MPa, was considered to be the largest for the practical application.展开更多
Several automotive parts such as door panels have been manufactured by using load-adapted blanks for crash optimization and weight minimization. Recently, Tailor Rolled Blanks (TRB) has been introduced to remove the d...Several automotive parts such as door panels have been manufactured by using load-adapted blanks for crash optimization and weight minimization. Recently, Tailor Rolled Blanks (TRB) has been introduced to remove the disadvantages of a welding process which was used in joining panel components. TRB offers better structural design capabilities due to the seamless transitions on the panels with different thicknesses. In spite of the advantages of the process, TRB leaves internal stresses in the panel. This residual stresses lower the formability of Tailor Rolled Blanked (TRBed) parts and cause cracks near severe curvature during subsequent forming processes. In this research, the residual stresses of TRBed Al5J32-T4 sheets were studied by X-ray stress analysis, and also microstructure was observed along the rolling direction. In addition, heat treatment was done after TRB process in order to compare the residual stresses to that of the TRBed sheets before the heat treatment.展开更多
基金The support of the S?o Paulo State University (UNESP)。
文摘In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial element that alleviates plant stress. Most studies involving silicon have focused on physiological responses, such as improvements in photosynthetic processes, water use efficiency, and antioxidant defense systems. But recent research suggests that stressed plants facing either limited or excessive resources(water, light, nutrients, and toxic elements), strategically employ Si to maintain C:N:P homeostasis, thereby minimizing biomass losses. Understanding the role of Si in mitigating the impact of abiotic stresses on plants by regulating C:N:P homeostasis holds great potential for advancing sustainable agricultural practices in crop production. This review presents recent advances in characterizing the influence of environmental stresses on C:N:P homeostasis, as well as the role of Si in preserving C:N:P equilibrium and attenuating biological damage associated with abiotic stress. It underscores the beneficial effects of Si in sustaining C:N:P homeostasis and increasing yield via improved nutritional efficiency and stress mitigation.
文摘Boulder spacing in mountain rivers and near-wake flow zones within the boulder array is very useful for fish habitat and growth of aquatic organisms.The present study aims to investigate how the boulder array and spacing influence the near-bed flow structures in a gravel-bed stream.Boulders are staggered over a gravel-bed stream with three different inter-boulder spacing namely(a)large(b)medium and(c)small spacing.An acoustic Doppler velocimeter was used for flow measurements in a rectangular channel and the results were compared with those acquired from numerical simulation.The time-averaged velocity profiles at the near-wake flow zones of boulders experience maximum flow retardation which is an outcome of the boulder-induced form roughness.The ratio of velocity differences associated to form and skin roughness and its positive magnitude reveals the dominance of form roughness closest to the boulders.Form roughness computed is 1.75 to 2 times higher than the skin roughness at the near-wake flow region.In particular,the collective immobile boulders placed at different inter-boulder spacings developed high and low bed shear stresses closest to the boulders.The low bed shear stresses characterised by a secondary peak developed at the trough location of the boulders is attributed to the skin shear stress.Further,the spatial averaging of time-averaged flow quantities gives additional impetus to present an improved illustration of fluid shear stresses.The formation of form-induced shear stress is estimated to be 17%to 23%of doubleaveraged Reynolds shear stress and partially compensates for the damping of time-averaged Reynolds shear stress in the interfacial sub-layer.The quadrant analysis of spatial velocity fluctuations depicts that the form-induced shear stresses are dominant in the interfacial sub-layer and have no significance above the gravel-bed surface.
文摘Reverse shoulder arthroplasty (RSA) is an effective treatment for rotator cuff tears. Despite its advantages, complications occur at a high rate. Complications requiring revision include a high rate of base plate failure, 38% of which are due to instability. The primary stability the base plate ensures is a crucial factor and, thus, is the subject of much debate in clinical studies and biomechanical research. This study is aimed to provide data that will contribute to the base plate’s pri-mary stability and glenoid longevity by clarifying the stresses at the scapular fossa and base plate interface associated with elevation after RSA. A 3D finite element model was created from the DICOM data for the scapulohumeral joint and SMR shoulder system. For loading conditions, 30 N was applied for each posi-tion with abduction angles of 0, 45, 90, and 135 degrees. A three-dimensional fi-nite element analysis was performed using the static implicit method with LS-DYNA. The von Mises stresses in the scapular fossa were found not to exceed the yield stress on the bone even after elevation to an abduction angle of 135 de-grees after RSA. It is rough to uniformly compare the yield stress and the von Mises stress, but it was inferred that the possibility of fracture is low unless a large external force is applied. A maximum von Mises stress showed 0 degrees of abduction, suggesting that the lowered position is in a more severe condition than the elevated position. If better improvement is desired, it may be necessary to devise ways to reduce the stress on the upper screw. .
基金supported by the National Key Research and Development Program of China (2022YFF1001500)the Open Competition Project of Seed Industry Revitalization of Jiangsu Province (JBGS[2021]060)+3 种基金the Core Technology Development for Breeding Program of Jiangsu Province (JBGS-2021-014)China Agriculture Research System of MOF and MARA (CARS-04)the Jiangsu Collaborative Innovation Center for Modern Crop Production (JCIC-MCP)Collaborative Innovation Center for Modern Crop Production Co-sponsored by Province and Ministry (CIC-MCP)。
文摘Drought-induced protein 19(Di19) is a Cys2/His2 zinc-finger protein that functions in plant growth and development and in tolerance to abiotic stresses.Gm PUB21,an E3 ubiquitin ligase,negatively regulates drought and salinity response in soybean.We identified potential interaction target proteins of Gm PUB21by yeast two-hybrid c DNA library screening,Gm Di19-5 as a candidate.Bimolecular fluorescence complementation and glutathionine-S-transferase pull-down assays confirmed the interaction between Gm Di19-5 and Gm PUB21.Gm Di19-5 was induced by Na Cl,drought,and abscisic acid(ABA) treatments.Gm Di19-5 was expressed in the cytoplasm and nucleus.Gm Di19-5 overexpression conferred hypersensitivity to drought and high salinity,whereas Gm Di19-5 silencing increased drought and salinity tolerance.Transcripts of ABA-and stress response-associated genes including Gm RAB18 and Gm DREB2A were downregulated in Gm Di19-5-overexpressing plants under drought and salinity stresses.ABA decreased the protein level of Gm Di19-5 in vivo,whereas Gm PUB21 increased the decrease of Gm Di19-5 after exogenous ABA application.The accumulation of Gm PUB21 was also inhibited by Gm Di19-5.We conclude that Gm PUB21 and Gm Di19-5 collaborate to regulate drought and salinity tolerance via an ABA-dependent pathway.
基金We acknowledge the funding support from the National Natural Science Foundation of China(Grant Nos.52009016 and 52179118)the Fundamental Research Funds for the Central Universities(Grant No.2022QN1032).
文摘The effect of intermediate stress(in situ tunnel axial)on a strainburst is studied with a threedimensional(3D)bonded block distinct element method(DEM).A series of simulations of strainbursts under true triaxial in situ stress conditions(i.e.high tangential stress,moderate intermediate stress and low radial stress)of near-boundary rock masses are performed.Compared with the experimental results,the DEM model is able to capture the stress-strain response,failure pattern and energy balance of strainbursts.The fracturing processes of strainbursts are also numerically reproduced.Numerical results show that,as the intermediate stress increases:(1)The peak strain of strainbursts increases,the yield stress increases,the rock strength increases linearly,and the ratio of yield stress to rock strength decreases,indicating that the precursory information on strainbursts is enhanced;(2)Tensile and shear cracks increase significantly,and slabbing and bending of rock plates are more pronounced;and(3)The stored elastic strain energy and dissipated energy increase linearly,whereas the kinetic energy of the ejected rock fragments increases approximately exponentially,implying an increase in strainburst intensity.By comparing the experimental and numerical results,the effect of intermediate stress on the rock strength of strainbursts is discussed in order to address three key issues.Then,the Mogi criterion is applied to construct new strength criteria for strainbursts by converting the one-face free true triaxial stress state of a strainburst to its equivalent true triaxial stress state.In summary,the effect of intermediate stress on strainbursts is a double-edged sword that can enhance the rock strength and the precursory information of a strainburst,but also increase its intensity.
基金funded by the Agricultural Science and Technology Innovation Project of the Chinese Academy of Agricultural Sciences(CAAS-ASTIP-2021-OCRI)the Key Research Projects of Hubei province(2020BBA045,2020BHB028)+1 种基金the Fundamental Research Funds for Central Non-profit Scientific Institution(Y2022XK11).the Open Project of Key Laboratory of Biology and Genetic Improvement of Oil Crops,Ministry of Agriculture and Rural Affairs,P.R.China.(KF2022002)China Agriculture Research System(CARS-14).
文摘Trehalose and its precursor,trehalose-6-phosphate,play critical roles in plant metabolism and response to abiotic stresses.Trehalose-6-phosphate synthase(TPS)is a key enzyme in the trehalose synthesis pathway.Hence this study identified TPS genes in sesame(SiTPSs)and examined their expression patterns under various abiotic stresses.Totally,ten SiTPSs were identified and comprehensively characterized.SiTPSs were found to be unevenly distributed on five out of 13 sesame chromosomes and were predicted to be localized in chloroplasts and vacuoles of cells.Phylogenetic analysis classified SiTPS proteins into two groups(I and II),which was supported by gene structure and conserved motif analyses.Analysis of cis-acting elements in promoter regions of SiTPSs revealed that they might primarily involve developmental and environmental responses.SiTPSs exhibited different expression patterns in different tissues and under different abiotic stresses.Most group II SiTPS genes(SiTPS4-SiTPS10)were strongly induced by drought,salt,waterlogging,and osmotic stress.Particularly,SiTPS10 was the most significantly up-regulated under various abiotic stresses,indicating it is a candidate gene for improving sesame tolerance to multiple abiotic stresses.Our results provide insight into the TPS gene family in sesame and fundamental resources for genomics studies towards dissecting SiTPS genes’functions.
基金supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2019D01C069)Natural Science Foundation of Xinjiang University(No.62031224614)。
文摘Nitraria sibirica Pall.is an important shrub with a strong salt-alkali tolerance,but the mechanism underlying this tolerance remains obscure.In this study,N.sibirica,with salt-sensitive Vigna radiata(Linn.)Wilczek as the control,was subjected to transient salt stress(100 mM NaCl),alkali stress(50 mM Na_(2)CO_(3)),and osmotic stress(175 mM mannitol).The ionic fluxes of Na^(+)and K^(+)in the root apical region were measured.Results show that,under salt and alkali stress,N.sibirica roots exhibited higher capacities to limit Na+influx and reduce K+efflux,thereby resulting in lower Na^(+)/K^(+)ratios compared with V.radiata roots.Alkali stress induced stronger Na^(+)influx and K+efflux in the root salt stress treatment;Na^(+)influx was mainly observed in the root cap,while K^(+)efflux was mainly observed in the elongation zone.While under osmotic stress,N.sibirica roots showed stronger Na+efflux and weaker K+efflux than V.radiata roots.Na+efflux was mainly observed in the root elongation zone,while K+efflux was in the root cap.These results reveal the ionic strategy of N.sibirica in response to transient salt,alkali,and osmotic stresses through the regulation of Na+/K+flux homeostasis.
基金partially supported by the Institute of Geology of the Czech Academy of Sciences project RVO 67985831.
文摘This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.
基金supported by the National Natural Science Foundation of China(Grant No.31772384)Science and Technology Project of Zhanjiang,Guangdong Province,China(Grant No.2021A05030)。
文摘Peptide transport is important for plant tissues where rapid proteolysis occurs,especially during germination and senescence,to enhance redistribution of organic nitrogen(N).However,the biological role of peptide transporters is poorly investigated in rice.We characterized the function of the peptide transporter OsNPF8.1 of rice nitrate transporter 1/peptide transporter family(NPF).Ectopic expression of OsNPF8.1 in yeast revealed that OsNPF8.1 encoded a high-affinity di-/tri-peptide transporter,and the osnpf8.1 mutants had a lower uptake rate of the fluorescent-labelled dipeptide c in leaves of rice seedlings.Histochemical assays showed that OsNPF8.1 was highly expressed in mesophyll cells and vascular parenchyma cells,but not detected in root hairs and epidermises.Expression of OsNPF8.1 was induced by N deficiency,drought,Na Cl and abscisic acid,and kept at a high level in senescing leaves.Under N deficiency conditions,compared with the wild type Zhonghua 11,the osnpf8.1 mutants grew slower at the seedling stage,and had lower grain yield and lower N content in the grains.In contrast,OsNPF8.1-over-expressing rice(OsNPF8.1-OE)grew faster at the seedling stage and had a higher grain yield.The osnpf8.1 seedlings were less tolerant to salt and drought stresses.These results suggested that stress-induced organic N transportation mediated by OsNPF8.1 might contribute to balance plant growth and tolerate to salt/drought stress and N-deficiency.
基金supported by the Ministry of Science and Higher Education of the Russian Federation for financial support under the Megagrant(no.075-15-2022-1133)the National Research Foundation(NRF)grant funded by the Ministry of Science and ICT(2015R1A2A1A01006795)of Korea through the Research Institute of Advanced Materials。
文摘Magnesium(Mg)single crystal specimens with three different orientations were prepared and tested from room temperature to 733 K in order to systematically evaluate effects of temperature on the critical resolved shear stress(CRSS)of slips and twinning in Mg single crystals.The duplex non-basal slip took place in the temperature range from 613 to 733 K when the single crystal samples were stretched along the<0110>direction.In contrast,the single basal slip and prismatic slip were mainly activated in the temperature range from RT to 733 K when the tensile directions were inclined at an angle of 45°with the basal and the prismatic plane,respectively.Viscoplastic self-consistent(VPSC)crystal modeling simulations with genetic algorithm code(GA-code)were carried out to obtain the best fitted CRSSs of major deformation modes,such as basal slip,prismatic slip,pyramidalⅡ,{1012}tensile twinning and{1011}compressive twinning when duplex slips accommodated deformation.Additionally,CRSSs of the basal and the prismatic slip were derived using the Schmid factor(SF)criterion when the single slip mainly accommodated deformation.From the CRSSs of major deformation modes obtained by the VPSC simulations and the SF calculations,the CRSSs for basal slip and{1012}tensile twinning were found to show a weak temperature dependence,whereas those for prismatic,slip and{1011}compressive twinning exhibited a strong temperature dependence.From the comparison of previous results,VPSC-GA modeling was proved to be an effective method to obtain the CRSSs of various deformation modes of Mg and its alloys.
基金This research was supported by the Sichuan Science and Technology Program(2023YFS0355).
文摘Stamping is a critical step in the manufacture of metallic bipolar plates.Typically,residual stress and a spring back effect appear on the bipolar plate after the stamping process,which impacts on the performance and lifetime of the proton exchange membrane fuel cell(PEMFC).The residual stress and spring back behavior which occur as a result of stamping a bipolar plate are investigated in this study.The effects of the punch radius,the die radius,the channel depth,and the clearance between the punch and the die on the residual stress and forming quality of the bipolar plate are examined.The stamping process can be divided into three stages.The high stress area and the middle section residual stress area were selected to study the formation process and to obtain the composition of the residual stress regions.Spring back was mainly related to the position of the fixed end of the sheet and the degree of plastic deformation,and the sheet thickness have increased by 2μm after spring back.Based on the results of finite element analysis,as described by the distribution of residual stress,the formation,the thickness of the middle cross section and the equivalent plastic strain,it was found that all the tool parameters affected the distribution of the residual stress.This research can provide a design reference for the manufacture of metallic bipolar plates based on the stamping process.
基金Open Foundation of National Energy shale gas R&D(experiment)center(2022-KFKT-12)the research delivered partial results under the support of the National Key R&D Program of China(2021YFC2902101)+2 种基金National Natural Science Foundation of China(12002081)the National Natural Science Foundation of China(Grant No.12002081)the 111 Project(B17009).
文摘Gas diffusion in the shale matrix has a dominant effect on late-stage production from shale gas reservoirs.However,adequate research on the mechanisms and contributions of gas diffusion for varied pore size populations in shale matrix under recreated in situ stress is lacking.We report gas-diffusion measurements under constant in situ stress but variable gas pressures for contrasting non-adsorbent(helium(He))and adsorbed(methane(CH_(4)))gases to investigate the impact of effective stress on the evolution of dominant mechanisms of diffusion.An intact sample replicates true pore-network topology and diffusion paths.An integrated diffusion model is proposed that combines the effects of slip flow,Knudsen flow,and surface diffusion to constrain the evolution of these flow regimes and their respective contributions to the observational data.Finally,a probability density function(PDF)is employed to separate the gas content distributions of macropores and micropores from the total gas content and to investigate gas contributions in various pores.The results reveal that the diffusion coefficients of both He and CH_(4) in macropores and micropores increase with gas pressure but decrease with increasing effective stress.The diffusion coefficients of He and CH_(4) are different in macropores but remain nearly the same in micropores.The diffusion coefficients of slip flow and surface diffusion increase with decreasing effective stress except for CH_(4) diffusion in the micropores,while the evolution of Knudsen diffusion shows the opposite trend.Slip flow plays a dominant role in He and CH_(4) diffusion within macropores(pore size 45 nm).Knudsen diffusion gradually becomes significant for He diffusion in the micropores(pore size 4 nm),conversely,for CH_(4) diffusion in the micropores,surface diffusion becomes significant.Related to gas production from reservoirs,the contributions of the micropores will increase gradually with the duration of gas recovery,indicating the significant role of gas diffusion in micropores to steady supply during latestage production.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFC1509901)。
文摘When expansive soils in the original location are artificially transferred to landfill in different seasons,and subject to engineering activities afterwards,the corresponding deformation and stability of retaining structures become unpredictable.This necessitates the determination of lateral pressure coefficient at rest(k_(0) value)for expansive soils in landfill.Considering compaction,excavation of expansive soils,as well as construction of landfill in different seasons,series of stepwise loading and unloading consolidation tests at various moisture contents were carried out in this work to explore the evolution characteristics of k_(0) value and assess the dependence of k_(0) value on vertical stress and moisture content.Besides,scanning electron microscope(SEM)was used to track the change in microstructural features with vertical stresses.The results indicated that the k_(0) value of expansive soil shows a pronounced nonlinearity and is inextricably linked with vertical stress and moisture content,based on which a prediction formula to estimate the variation in k_(0) value with vertical stress during loading stage was proposed;there is a significant exponential increase in k_(0) value with overconsolidation ratio(OCR)during unloading stage,and OCR dominates the release of horizontal stress of expansive soil;SEM results revealed that with an increase in vertical stress,the anisotropy of expansive soil microstructure increases dramatically,causing a significant directional readjustment,which is macroscopically manifested as an initially rapid increase in k_(0) value;but when vertical stress increases to a critical value,the anisotropy of microstructure increases marginally,indicating a stable orientation occurring in the soil microstructure,which causes the k_(0) value to maintain a relatively stable value.
基金funded by Shenzhen Basic Research Program,China(Grant No.JCYJ20220818095605012)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams,China(Grant No.2019ZT08G315)the National Science Foundation of China(Grant No.52121003).
文摘Crack initiation stress and crack damage stress are two critical indices for assessing the fracture strength of rock mass.However,understanding the stress characteristics of crack initiation and damage under triaxial compression remains still immature.To address this problem,by acoustic monitoring,i.e.ultrasonic wave transmission and acoustic emission(AE),the integrated triaxial compression experiments were carried out on granitic specimens.The crack initiation and damage stresses were determined by wave velocity,wave amplitude and AE methods,respectively.The discrepancy of stresses for crack initiation and damage identified by these methods were examined.Results showed that the confinement affected the peak stress and corresponding strain,and these two parameters increased with increasing confining pressure.The ultrasonic wave velocity and wave amplitude first increased and then remained relatively stable,and finally decreased with increasing axial compressive stress.The number of AE events stayed at a relatively low extent until axial stress approached the peak;after that,the AE accumulative counts skyrocketed to the maximum.It also shows that for a given confinement,the stresses for crack initiation and damage identified by the wave amplitude method were the smallest,followed those by AE method and wave velocity method.Moreover,the stresses for crack initiation and crack damage identified by these methods increased generally with confining pressures.However,the rate of increment of these two crack stresses decreased with increasing confining pressure.In addition,the slight decrease in these two crack stresses ratios was noticed with increasing confining pressure.The findings are helpful to understand the crack stresses of deep rocks,in terms of support of deep underground engineering.
文摘The current paper focuses on the prediction of residual stresses and distortions in the Laser Powder Bed Fusion(LPBF)built Ti6Al4V thin-walled geometries using Ansys Additive Print(AAP)software which employs a layer-by-layer accumulation of inherent strain to calculate the deformations.Isotropic and anisotropic strain scaling factors were calibrated initially within the APP software for the Ti6Al4V based single cantilever beam geometry.Subsequently,the numerical simulations were performed in APP software and computed the residual stresses and distortions for the varied process parameters including laser power,scan speed and hatch distance while maintaining the layer thickness constant for all the design iterations.The numerical predictions were compared;they were found to match reasonably well with the XRD measurements within the calibrated regime.
基金Project supported by the National Natural Science Foundation of China (Grant No.11904042)the Natural Science Foundation of Chongqing,China (Grant No.cstc2019jcyj-msxmX0534)the Science and Technology Research Program of Chongqing Municipal Education Commission,China (Grant No.KJQN202000617)。
文摘The cavitation dynamics and mechanical stress in viscoelastic tissues, as the primary mechanisms of some ultrasound therapies, are extremely complex due to the interactions of cavitation bubble with adjacent bubbles and surrounding tissues.Therefore, the cavitation dynamics and resultant mechanical stress of two-interacting bubbles in the viscoelastic tissues are numerically investigated, especially focusing on the effects of the adjacent bubble. The results demonstrate that the mechanical stress is highly dependent on the bubble dynamics. The compressive stress and tensile stress are generated at the stage of bubble expansion and collapse stage, respectively. Furthermore, within the initial parameters examined in this paper, the effects of the adjacent bubble will distinctly suppress the radial expansion of the small bubble and consequently lead its associated stresses to decrease. Owing to the superimposition of two stress fields, the mechanical stresses surrounding the small bubble in the direction of the neighboring bubble are smaller than those in other directions. For two interacting cavitation bubbles, the suppression effects of the nearby bubble on both the cavitation dynamics and the stresses surrounding the small bubble increase as the ultrasound amplitude and the initial radius of the large bubble increase, whereas they decrease with the inter-bubble distance increasing. Moreover, increasing the tissue viscoelasticity will reduce the suppression effects of the nearby bubble, except in instances where the compressive stress and tensile stress first increase and then decrease with the tissue elasticity and viscosity increasing respectively. This study can provide a further understanding of the mechanisms of cavitation-associated mechanical damage to the adjacent tissues or cells.
基金supported by Importing,Cultivation and Production for Special Maize(2020LYXZ032).
文摘The zinc finger homeodomain(ZF-HD)genes belong to the homeobox gene family,playing critical roles in flower development and stress response.Despite their importance,however,to date there has been no genome-wide identification and characterization of the ZF-HD genes that are probably involved in stress responses in maize.In this study,24 ZF-HD genes were identified,and their chromosomal locations,protein properties,duplication patterns,structures,conserved motifs and expression patterns were investigated.The results revealed that the ZF-HD genes are unevenly distributed on nine chromosomes and that most of these genes lack introns.Six and two ZF-HD genes have undergone segmental and tandem duplication,respectively,during genome expansion.These 24 ZF-HD transcription factors were classified into six major groups on the basis of protein molecular evolutionary relationship.The expression profiles of these genes in different tissues were evaluated,resulting in producing two distinct clusters.ZF-HD genes are preferentially expressed in reproductive tissues.Furthermore,expression profiles of the 24 ZF-HD genes in response to different kinds of stresses revealed that ten genes were simultaneously up-regulated under ABA,salt and PEG treatments;meanwhile four genes were simultaneously down-regulated.These findings will pave the way for deciphering the function and mechanism of ZF-HD genes on how to implicate in abiotic stress.
基金funding from the Research Fund for Coal and Steel under grant agreement No.799787。
文摘The issue of determining the maximum compressive residual stress that can be induced through mechanical surface treatment is of great significance.There are two possible approaches,namely stress peening and stress rolling,both to determine the limit.Steel with high hardness may be under the yield strength,while for those with lower tensile strength,the hardness is increased,and the limit is above the tensile strength.
基金support of the Poznan Networking&Supercomputing Center(PCSS)calculation grant
文摘Rolling path squeezes and rolling residual stresses of large diameter circular saw body for wood, generated by rolling pressure from 10 up to 120 bar were examined. X-ray diffraction, Barkhausen noise (BN) and Full Width of the peak at a Half Maximum (FWHM) (o) methods for evaluation of residual stresses were used. Dependencies of a tangential rolling residual stresses inside rolling paths upon rolling pressure p (bar) and rolling area A (mm2) were evaluated. The rolling pressure, as large as 60 bar, resulting in the rolling squeeze as high as 0.04 mm2, and, tangential residual compression stresses inside a rolling path, as large as ?TI = ?822 MPa, was considered to be the largest for the practical application.
基金This work was financiallysupportedbythe Research Grants(NN-8501)from Ministry ofCommerce,Industry and Energyin Republic ofKorea.
文摘Several automotive parts such as door panels have been manufactured by using load-adapted blanks for crash optimization and weight minimization. Recently, Tailor Rolled Blanks (TRB) has been introduced to remove the disadvantages of a welding process which was used in joining panel components. TRB offers better structural design capabilities due to the seamless transitions on the panels with different thicknesses. In spite of the advantages of the process, TRB leaves internal stresses in the panel. This residual stresses lower the formability of Tailor Rolled Blanked (TRBed) parts and cause cracks near severe curvature during subsequent forming processes. In this research, the residual stresses of TRBed Al5J32-T4 sheets were studied by X-ray stress analysis, and also microstructure was observed along the rolling direction. In addition, heat treatment was done after TRB process in order to compare the residual stresses to that of the TRBed sheets before the heat treatment.
