Structural planes play an important role in controlling the stability of rock engineering,and the influence of structural planes should be considered in the design and construction process of rock engineering.In this ...Structural planes play an important role in controlling the stability of rock engineering,and the influence of structural planes should be considered in the design and construction process of rock engineering.In this paper,mechanical properties,constitutive theory,and numerical application of structural plane are studied by a combination method of laboratory tests,theoretical derivation,and program development.The test results reveal the change laws of various mechanical parameters under different roughness and normal stress.At the pre-peak stage,a non-stationary model of shear stiffness is established,and threedimensional empirical prediction models for initial shear stiffness and residual stage roughness are proposed.The nonlinear constitutive models are established based on elasto-plastic mechanics,and the algorithms of the models are developed based on the return mapping algorithm.According to a large number of statistical analysis results,empirical prediction models are proposed for model parameters expressed by structural plane characteristic parameters.Finally,the discrete element method(DEM)is chosen to embed the constitutive models for practical application.The running programs of the constitutive models have been compiled into the discrete element model library.The comparison results between the proposed model and the Mohr-Coulomb slip model show that the proposed model can better describe nonlinear changes at different stages,and the predicted shear strength,peak strain and shear stiffness are closer to the test results.The research results of the paper are conducive to the accurate evaluation of structural plane in rock engineering.展开更多
To investigate the dynamic damage evolution characteristics of bank slopes with serrated structural planes,the shaking table model test and the numerical simulation were utilized.The main findings indicate that under ...To investigate the dynamic damage evolution characteristics of bank slopes with serrated structural planes,the shaking table model test and the numerical simulation were utilized.The main findings indicate that under continuous seismic loads,the deformation of the bank slope increased,particularly around the hydro-fluctuation belt,accompanying by the pore water pressure rising.The soil pressure increased and then decreased showed dynamic variation characteristics.As the undulation angle of the serrated structural planes increased(30°, 45°, and 60°),the failure modes were climbing,climbinggnawing,and gnawing respectively.The first-order natural frequency was used to calculate the damage degree(Dd)of the bank slope.During microseisms and small earthquakes,it was discovered that the evolution of Dd followed the“S”shape,which was fitted by a logic function.Additionally,the quadratic function was used to fit the Dd during moderately strong earthquakes.Through the numerical simulation,the variation characteristics of safety factors(Sf)for slopes with serrated structural planes and slopes with straight structural planes were compared.Under continuous seismic loads,the Sf of slopes with straight structural planes reduce stalely,whereas the Sf for slopes with serrated structural planes was greater than the former and the reduction rate was increasing.展开更多
The staggered distribution of joints and fissures in space constitutes the weak part of any rock mass.The identification of rock mass structural planes and the extraction of characteristic parameters are the basis of ...The staggered distribution of joints and fissures in space constitutes the weak part of any rock mass.The identification of rock mass structural planes and the extraction of characteristic parameters are the basis of rock-mass integrity evaluation,which is very important for analysis of slope stability.The laser scanning technique can be used to acquire the coordinate information pertaining to each point of the structural plane,but large amount of point cloud data,uneven density distribution,and noise point interference make the identification efficiency and accuracy of different types of structural planes limited by point cloud data analysis technology.A new point cloud identification and segmentation algorithm for rock mass structural surfaces is proposed.Based on the distribution states of the original point cloud in different neighborhoods in space,the point clouds are characterized by multi-dimensional eigenvalues and calculated by the robust randomized Hough transform(RRHT).The normal vector difference and the final eigenvalue are proposed for characteristic distinction,and the identification of rock mass structural surfaces is completed through regional growth,which strengthens the difference expression of point clouds.In addition,nearest Voxel downsampling is also introduced in the RRHT calculation,which further reduces the number of sources of neighborhood noises,thereby improving the accuracy and stability of the calculation.The advantages of the method have been verified by laboratory models.The results showed that the proposed method can better achieve the segmentation and statistics of structural planes with interfaces and sharp boundaries.The method works well in the identification of joints,fissures,and other structural planes on Mangshezhai slope in the Three Gorges Reservoir area,China.It can provide a stable and effective technique for the identification and segmentation of rock mass structural planes,which is beneficial in engineering practice.展开更多
The occurrence of disasters in deep mining engineering has been confirmed to be closely related to the external dynamic disturbances and geological discontinuities.Thus,a combined finite-element method was employed to...The occurrence of disasters in deep mining engineering has been confirmed to be closely related to the external dynamic disturbances and geological discontinuities.Thus,a combined finite-element method was employed to simulate the failure process of an underground cavern,which provided insights into the failure mechanism of deep hard rock affected by factors such as the dynamic stress-wave amplitudes,disturbance direction,and dip angles of the structural plane.The crack-propagation process,stress-field distribution,displacement,velocity of failed rock,and failure zone around the circular cavern were analyzed to identify the dynamic response and failure properties of the underground structures.The simulation results indicate that the dynamic disturbance direction had less influence on the dynamic response for the constant in situ stress state,while the failure intensity and damage range around the cavern always exhibited a monotonically increasing trend with an increase in the dynamic load.The crack distribution around the circular cavern exhibited an asymmetric pattern,possibly owing to the stress-wave reflection behavior and attenuation effect along the propagation route.Geological discontinuities significantly affected the stability of nearby caverns subjected to dynamic disturbances,during which the failure intensity exhibited the pattern of an initial increase followed by a decrease with an increase in the dip angle of the structural plane.Additionally,the dynamic disturbance direction led to variations in the crack distribution for specific structural planes and stress states.These results indicate that the failure behavior should be the integrated response of the excavation unloading effect,geological conditions,and external dynamic disturbances.展开更多
Hydraulic fracture(HF) propagation behavior is significant when building enhanced geothermal systems(EGS). HF geometry is closely related to the structural planes(SPs) in hot dry rock(HDR), such as natural fractures(N...Hydraulic fracture(HF) propagation behavior is significant when building enhanced geothermal systems(EGS). HF geometry is closely related to the structural planes(SPs) in hot dry rock(HDR), such as natural fractures(NFs), quartz veins(QVs) and lithologic interfaces(LIs). However, the HF behaviors in HDR have not been well understood, especially the influence of multiple SPs on the HF geometry. To clarify this mechanism, several groups of physical simulation experiments of hydraulic fracturing were conducted to investigate the intersection relationship between the HFs and the SPs. Results show that the HF geometry shows great differences when intersecting with different SPs. In summary, the HF geometry displays four basic patterns, namely, propagation along the SPs, branching, capture, penetration/non-dilation. The fluctuation degree of the pressure-time curve and the HF complexity show a positive correlation. The cementing strength of the SP and their different mechanical properties from rock matrix influence the HF behaviors significantly. Therefore, the HF shows diverse geometries when intersecting with the NFs and LIs, while propagating along the QV when intersecting with it. For the complex networks, it is favorable for the HF to penetrate through and dilate several SPs, rather than simply cross or propagate along the SP.展开更多
The weak structure plane is an important factor affecting the stability of rock slope, and detecting the spatial structure of the weak structural plane is beneficial to analyze the stability of the slope and estimate ...The weak structure plane is an important factor affecting the stability of rock slope, and detecting the spatial structure of the weak structural plane is beneficial to analyze the stability of the slope and estimate the quantity of the landslide. Based on 3D electrical resistivity tomography, a model of rock slope with weak structure plane is established, and the characteristics of three-dimensional resistivity imaging of weak structure plane under different ground water conditions are simulated. The results show that the weak structural plane has a better reflection in 3D electrical resistivity tomography;the distribution of weak structural plane of 3D resistivity imaging can be roughly determined under different ground water conditions;the three-dimensional electrical resistivity tomography is feasible in the detection of weak structural plane of rock slope.展开更多
Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure nu...Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.展开更多
A physical model for the footwall slope of Nanfen open-pit mine, China was established using a selfdeveloped deep geological engineering disaster model test system. A thermosensitive similar material,paraffin, was sel...A physical model for the footwall slope of Nanfen open-pit mine, China was established using a selfdeveloped deep geological engineering disaster model test system. A thermosensitive similar material,paraffin, was selected to simulate a weak structural plane in the slope to reproduce the landslide process.From an experimental perspective, the variation trend of shear strength parameters of weak structural plane and the mechanical support characteristics of NPR(negative Poisson’s ratio) anchor cable under the condition of a large landslide deformation and failure were examined. The results of this model test showed that slope failure has four distinct stages:(1) soil compaction stage,(2) crack generation stage,(3) crack propagation stage, and(4) sliding plane transfixion stage. According to the test results, the rock mechanics parameters of weak surface in the footwall slope of Nanfen open-pit mine were calculated.The cohesion is approximately 1.35×10~5 Pa, and the internal friction angle is approximately 6.33°.During slope failure, the NPR anchor cable experiences a large deformation but no damage occurs, indicating that the NPR anchor cable can be continuously monitored and reinforced during the deformation and failure of landslide. The stress characteristics of NPR anchor cables during the test are consistent with the monitoring results of Newtonian force at the landslide site, proving that NPR anchor cables are effective and reasonable in landslide monitoring and early warning.展开更多
This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear cree...This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear creep behavior of the samples is characterized using the rheological tests.Based on the experimental measurements on mechanical properties under different normal stress conditions,an improved model is proposed to analyze the experimental results.It is demonstrated from a further discussion that such model can reflect the non-linear creep characteristics of structural planes,and especially,it is suitable for description of the viscoelastic and viscoplastic deformation behavior of structural planes.展开更多
基金This work presented in this paper was funded by the National Natural Science Foundation of China(Grant Nos.51478031 and 51278046)Shenzhen Science and Technology Innovation Fund(Grant No.FA24405041).The authors are grateful to the editor and reviewers for discerning comments on this paper.
文摘Structural planes play an important role in controlling the stability of rock engineering,and the influence of structural planes should be considered in the design and construction process of rock engineering.In this paper,mechanical properties,constitutive theory,and numerical application of structural plane are studied by a combination method of laboratory tests,theoretical derivation,and program development.The test results reveal the change laws of various mechanical parameters under different roughness and normal stress.At the pre-peak stage,a non-stationary model of shear stiffness is established,and threedimensional empirical prediction models for initial shear stiffness and residual stage roughness are proposed.The nonlinear constitutive models are established based on elasto-plastic mechanics,and the algorithms of the models are developed based on the return mapping algorithm.According to a large number of statistical analysis results,empirical prediction models are proposed for model parameters expressed by structural plane characteristic parameters.Finally,the discrete element method(DEM)is chosen to embed the constitutive models for practical application.The running programs of the constitutive models have been compiled into the discrete element model library.The comparison results between the proposed model and the Mohr-Coulomb slip model show that the proposed model can better describe nonlinear changes at different stages,and the predicted shear strength,peak strain and shear stiffness are closer to the test results.The research results of the paper are conducive to the accurate evaluation of structural plane in rock engineering.
基金supported by the National Natural Science Foundation of China(No.41972266)the China Postdoctoral Science Foundation(No.2023M730432)+1 种基金the Special Funding for Chongqing Postdoctoral Research Project(No.2022CQBSHTB1010)the Chongqing Postdoctoral Science Foundation(No.CSTB2023NSCQBHX0223).
文摘To investigate the dynamic damage evolution characteristics of bank slopes with serrated structural planes,the shaking table model test and the numerical simulation were utilized.The main findings indicate that under continuous seismic loads,the deformation of the bank slope increased,particularly around the hydro-fluctuation belt,accompanying by the pore water pressure rising.The soil pressure increased and then decreased showed dynamic variation characteristics.As the undulation angle of the serrated structural planes increased(30°, 45°, and 60°),the failure modes were climbing,climbinggnawing,and gnawing respectively.The first-order natural frequency was used to calculate the damage degree(Dd)of the bank slope.During microseisms and small earthquakes,it was discovered that the evolution of Dd followed the“S”shape,which was fitted by a logic function.Additionally,the quadratic function was used to fit the Dd during moderately strong earthquakes.Through the numerical simulation,the variation characteristics of safety factors(Sf)for slopes with serrated structural planes and slopes with straight structural planes were compared.Under continuous seismic loads,the Sf of slopes with straight structural planes reduce stalely,whereas the Sf for slopes with serrated structural planes was greater than the former and the reduction rate was increasing.
基金the National Natural Science Foundation of China(51909136)the Open Research Fund of Key Laboratory of Geological Hazards on Three Gorges Reservoir Area(China Three Gorges University),Ministry of Education,Grant No.2022KDZ21Fund of National Major Water Conservancy Project Construction(0001212022CC60001)。
文摘The staggered distribution of joints and fissures in space constitutes the weak part of any rock mass.The identification of rock mass structural planes and the extraction of characteristic parameters are the basis of rock-mass integrity evaluation,which is very important for analysis of slope stability.The laser scanning technique can be used to acquire the coordinate information pertaining to each point of the structural plane,but large amount of point cloud data,uneven density distribution,and noise point interference make the identification efficiency and accuracy of different types of structural planes limited by point cloud data analysis technology.A new point cloud identification and segmentation algorithm for rock mass structural surfaces is proposed.Based on the distribution states of the original point cloud in different neighborhoods in space,the point clouds are characterized by multi-dimensional eigenvalues and calculated by the robust randomized Hough transform(RRHT).The normal vector difference and the final eigenvalue are proposed for characteristic distinction,and the identification of rock mass structural surfaces is completed through regional growth,which strengthens the difference expression of point clouds.In addition,nearest Voxel downsampling is also introduced in the RRHT calculation,which further reduces the number of sources of neighborhood noises,thereby improving the accuracy and stability of the calculation.The advantages of the method have been verified by laboratory models.The results showed that the proposed method can better achieve the segmentation and statistics of structural planes with interfaces and sharp boundaries.The method works well in the identification of joints,fissures,and other structural planes on Mangshezhai slope in the Three Gorges Reservoir area,China.It can provide a stable and effective technique for the identification and segmentation of rock mass structural planes,which is beneficial in engineering practice.
基金The authors would like to acknowledge the financial supports from the National Natural Science Foundation of China(Grant Nos.52004143,51774194)the Open fund for State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines,the China Postdoctoral Science Foundation(No.2020M670781)the NSFC-Shandong Joint fund(Grant No.U1806208).
文摘The occurrence of disasters in deep mining engineering has been confirmed to be closely related to the external dynamic disturbances and geological discontinuities.Thus,a combined finite-element method was employed to simulate the failure process of an underground cavern,which provided insights into the failure mechanism of deep hard rock affected by factors such as the dynamic stress-wave amplitudes,disturbance direction,and dip angles of the structural plane.The crack-propagation process,stress-field distribution,displacement,velocity of failed rock,and failure zone around the circular cavern were analyzed to identify the dynamic response and failure properties of the underground structures.The simulation results indicate that the dynamic disturbance direction had less influence on the dynamic response for the constant in situ stress state,while the failure intensity and damage range around the cavern always exhibited a monotonically increasing trend with an increase in the dynamic load.The crack distribution around the circular cavern exhibited an asymmetric pattern,possibly owing to the stress-wave reflection behavior and attenuation effect along the propagation route.Geological discontinuities significantly affected the stability of nearby caverns subjected to dynamic disturbances,during which the failure intensity exhibited the pattern of an initial increase followed by a decrease with an increase in the dip angle of the structural plane.Additionally,the dynamic disturbance direction led to variations in the crack distribution for specific structural planes and stress states.These results indicate that the failure behavior should be the integrated response of the excavation unloading effect,geological conditions,and external dynamic disturbances.
基金support from the National Key Research and Development Project in China(Grant nos.2018YFB1501801,2020YFE020130005)the National Natural Science Foundation of China(Grant nos.42004115,42102353)the Open Research Fund Program of Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring(Central South University),Ministry of Education(Grant No.2021YSJS08)。
文摘Hydraulic fracture(HF) propagation behavior is significant when building enhanced geothermal systems(EGS). HF geometry is closely related to the structural planes(SPs) in hot dry rock(HDR), such as natural fractures(NFs), quartz veins(QVs) and lithologic interfaces(LIs). However, the HF behaviors in HDR have not been well understood, especially the influence of multiple SPs on the HF geometry. To clarify this mechanism, several groups of physical simulation experiments of hydraulic fracturing were conducted to investigate the intersection relationship between the HFs and the SPs. Results show that the HF geometry shows great differences when intersecting with different SPs. In summary, the HF geometry displays four basic patterns, namely, propagation along the SPs, branching, capture, penetration/non-dilation. The fluctuation degree of the pressure-time curve and the HF complexity show a positive correlation. The cementing strength of the SP and their different mechanical properties from rock matrix influence the HF behaviors significantly. Therefore, the HF shows diverse geometries when intersecting with the NFs and LIs, while propagating along the QV when intersecting with it. For the complex networks, it is favorable for the HF to penetrate through and dilate several SPs, rather than simply cross or propagate along the SP.
文摘The weak structure plane is an important factor affecting the stability of rock slope, and detecting the spatial structure of the weak structural plane is beneficial to analyze the stability of the slope and estimate the quantity of the landslide. Based on 3D electrical resistivity tomography, a model of rock slope with weak structure plane is established, and the characteristics of three-dimensional resistivity imaging of weak structure plane under different ground water conditions are simulated. The results show that the weak structural plane has a better reflection in 3D electrical resistivity tomography;the distribution of weak structural plane of 3D resistivity imaging can be roughly determined under different ground water conditions;the three-dimensional electrical resistivity tomography is feasible in the detection of weak structural plane of rock slope.
文摘Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.
基金This study was supported by Zhejiang Collaborative Innovation Center for Prevention and Control of Mountain Geologic Hazards(Grant no.PCMGH-2016-Z-02).
文摘A physical model for the footwall slope of Nanfen open-pit mine, China was established using a selfdeveloped deep geological engineering disaster model test system. A thermosensitive similar material,paraffin, was selected to simulate a weak structural plane in the slope to reproduce the landslide process.From an experimental perspective, the variation trend of shear strength parameters of weak structural plane and the mechanical support characteristics of NPR(negative Poisson’s ratio) anchor cable under the condition of a large landslide deformation and failure were examined. The results of this model test showed that slope failure has four distinct stages:(1) soil compaction stage,(2) crack generation stage,(3) crack propagation stage, and(4) sliding plane transfixion stage. According to the test results, the rock mechanics parameters of weak surface in the footwall slope of Nanfen open-pit mine were calculated.The cohesion is approximately 1.35×10~5 Pa, and the internal friction angle is approximately 6.33°.During slope failure, the NPR anchor cable experiences a large deformation but no damage occurs, indicating that the NPR anchor cable can be continuously monitored and reinforced during the deformation and failure of landslide. The stress characteristics of NPR anchor cables during the test are consistent with the monitoring results of Newtonian force at the landslide site, proving that NPR anchor cables are effective and reasonable in landslide monitoring and early warning.
文摘This paper reports an improved constitutive model for the shear creep behavior of offwhite marbles which are selected from slope and underground cavern and contain green schist’s weak structural planes.The shear creep behavior of the samples is characterized using the rheological tests.Based on the experimental measurements on mechanical properties under different normal stress conditions,an improved model is proposed to analyze the experimental results.It is demonstrated from a further discussion that such model can reflect the non-linear creep characteristics of structural planes,and especially,it is suitable for description of the viscoelastic and viscoplastic deformation behavior of structural planes.
