In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular ...In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular elements varied widely among different phytoplankton.We found that temperature is one of the important factors affecting the carbon,nitrogen,and sulfur contents in phytoplankton cells;however,the degree of influence of temperature is different for different kinds of phytoplankton.By measuring the nitrogen content in cells,we found that the C:N ratio indirectly measured in the experiment fluctuated in the range of 3.50-8.97,and the average C:N ratio was 5.52.In this experiment,we accurately measured the cell elemental contents at different temperatures and transformed the cell count results into carbon,nitrogen,and sulfur contents to express the biomass.This method ensures that the contribution of species that are small in number but with a large cell volume in biomass is considered.Moreover,this method comprehensively considers the interspecific differences of species and the uneven distribution of elements in phytoplankton cells,which is of significance in the estimation of marine carbon and nitrogen budget.The distribution of nitrogen content in marine phytoplankton can well indicate the marine eutrophication caused by human activities.Climate change can affect the community structure and element composition of marine phytoplankton,meanwhile marine carbon and nitrogen element can regulate the climate to a certain extent.展开更多
High-energy density lithium-sulfur(Li-S) batteries have received intensive attention as promising energy storage system.Among diverse sulfur-based cathodes,sulfurized pyrolyzed poly(acrylonitrile)(S@pPAN)cathode deliv...High-energy density lithium-sulfur(Li-S) batteries have received intensive attention as promising energy storage system.Among diverse sulfur-based cathodes,sulfurized pyrolyzed poly(acrylonitrile)(S@pPAN)cathode delivered superior electrochemical performance.However,the sulfur content of S@pPAN is relatively low(<50 wt%),which significantly limits the energy density.Herein,a hydrogel SA-Cu binder was proposed with a crosslinking network constructed by Cu^(2+) ions.The introduction of Cu^(2+) ions enabled excellent electrochemical behaviors of S@pPAN cathode even with high sulfur content of 52.6 wt% via chemical interaction with sulfur and polysulfide.Moreover,a favorable cathode interphase was formed containing electrochemically active and conductive CuSx.S@pPAN/SA-Cu exhibited a high sulfur utilization of 85.3%,long cycling stability over 1000 cycles and remarkable capacity of 1200 mAh g_(s)^(-1) even at10 C.Furthermore,ascribed to the improved electrode structure,high-loading electrode(sulfur loading:4 mg cm^(-2)) displayed stable cycling with areal capacity of 5.26 mAh cm^(-2)(1315 mAh g_(s)^(-1)) after 40 cycles.This study provides new directions to prepare high-sulfur content and high-loading S@pPAN cathode for higher energy density.展开更多
The rules of MIP reactions for catalytic cracking of sulfur compounds and its influence on the sulfur content in the MIP naphtha were studied.The mam factors influencing the sulfur content in the MIP naphtha were thou...The rules of MIP reactions for catalytic cracking of sulfur compounds and its influence on the sulfur content in the MIP naphtha were studied.The mam factors influencing the sulfur content in the MIP naphtha were thought to be the sulfur content of feedstock and were closely related with the olefin content of naphtha.Taking into account the characteristic features of MIP process,the methods for reducing the sulfur content in the MIP naphtha were comprised of decreasing the sulfur content of feedstock by hydrotreating and decreasing the olefin content of naphtha through promoting hydrogen transfer reactions.Therefore,the EuroⅣclean gasoline with low sulfur content and low olefin content could be obtained directly through the MIP technology.展开更多
Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-2...Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfurization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefin content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.展开更多
Nowadays,lithium-sulfur batteries have attracted numerous attention due to their high specific capacity,high energy density,low cost and environmental benignancy.However,there are some critical challenges to be overco...Nowadays,lithium-sulfur batteries have attracted numerous attention due to their high specific capacity,high energy density,low cost and environmental benignancy.However,there are some critical challenges to be overcome such as low electronic conductivity and capacity fading caused by shuttle effect.Many attempts have been conducted to improve the electrochemical performance by designing effective sulfur hosts.In this paper,we synthesize a concrete-like sulfur/carbon cathode with high sulfur content(84%)by using 3D macroporous hosts with high pore volume.Sophisticated strategies of using polarized carbon framework and polymer coating are applied to synergistically control the dissolution of polysulfides so that the capacity retention and high rate performance can be remarkably enhanced.As a result,the composite exhibits a specific discharge capacity of 820 mAhg-1at a discharge current of 800 mAg-1(approximate to 0.5 C)after 100 cycles,calculated on the integrated mass of composite,which is superior to most report results.展开更多
This paper has investigated the influence of gasoline sulfur content on durability of catalytic converter for vehicle exhaust gas. Two gasoline samples with different sulfur contents (equating to 150 μg/g and 50 μg/...This paper has investigated the influence of gasoline sulfur content on durability of catalytic converter for vehicle exhaust gas. Two gasoline samples with different sulfur contents (equating to 150 μg/g and 50 μg/g of sulfur, respectively) were used to examine the durability and performance of catalytic converter on the bench test. The test results have revealed that in comparison to the influence of sulfur on ageing of catalytic converter the thermal ageing had a more remarkable impact on the performance of catalytic converter, and the performance of catalytic converter could be restored by high-temperature desulfurization process after ageing by the high-sulfur gasoline sample (containing 150 μg/g of sulfur) .展开更多
Lithium sulfur batteries(LSBs)are recognized as promising devices for developing next-generation energy storage systems.In addition,they are attractive rechargeable battery systems for replacing lithium-ion batteries(...Lithium sulfur batteries(LSBs)are recognized as promising devices for developing next-generation energy storage systems.In addition,they are attractive rechargeable battery systems for replacing lithium-ion batteries(LIBs)for commercial use owing to their higher theoretical energy density and lower cost compared to those of LIBs.However,LSBs are still beset with some persistent issues that prevent them from being used industrially,such as the unavoidable dissolution of lithium polysulfide intermediates during electrochemical reactions and large volume expansion(up to 80%)upon the formation of Li_(2)S,resulting in serious battery life and safety limitations.In the process of solving these problems,it is necessary to maintain a high sulfur content in the cathode materials to ensure that the LSBs have high energy densities and excellent cycle performance.In this review,the novel preparation methods and cathode materials used for preparing LSBs in recent years are reviewed considering the sulfur content and cycle performance.In addition,the problems and difficulties in practically applying cathode materials are described,and the development trend is discussed.展开更多
There have been several studies on sulfur depletion in dense cores like TMC-1(Taurus Molecular Cloud 1),employing updated reaction networks for sulfur species to explain the missing sulfur in the gas within dense clou...There have been several studies on sulfur depletion in dense cores like TMC-1(Taurus Molecular Cloud 1),employing updated reaction networks for sulfur species to explain the missing sulfur in the gas within dense clouds.Most of these studies used a C/O ratio of 0.7 or lower.We present NSRT(NanShan 26m Radio Telescope)observations of TMC-1 alongside results from time-dependent chemical simulations using an updated chemical network.Our findings highlight the impact of the C/O ratio on the gas-phase evolution of C2S and C3S.The simulation results show that the C/O ratio is an important parameter,playing a fundamental role in determining the gas-phase abundances of sulfur species in dense cores.展开更多
Glucosinolates(GSLs) are a group of nitrogen-and sulfur-containing secondary metabolites, synthesized primarily in members of the Brassicaceae family, that play an important role in food flavor, plant antimicrobial ac...Glucosinolates(GSLs) are a group of nitrogen-and sulfur-containing secondary metabolites, synthesized primarily in members of the Brassicaceae family, that play an important role in food flavor, plant antimicrobial activity, resistance to insect attack, stress tolerance, and human anti-cancer effects. As a sulfur-containing compound, glutathione has a strong connection with GSLs biosynthesis as a sulfur donor or redox system, and exists in reduced(glutathione;GSH) and oxidized(glutathione disulfide;GSSG) forms. However, the mechanism of GSH regulating GSLs biosynthesis remainds unclear. Hence, the exogenous therapy to pakchoi under normal growth condition and sulfur deficiency condition were conducted in this work to explore the relevant mechanism. The results showed that exogenous application of buthionine sulfoximine, an inhibitor of GSH synthesis, decreased the transcript levels of GSLs synthesis-related genes and transcription factors, as well as sulfur assimilation-related genes under the normal growth condition. Application of exogenous GSH inhibited the expression of GSLs synthesis-and sulfur assimilation-related genes under the normal condition, while the GSLs biosynthesis and the sulfur assimilation pathway were activated by exogenous application of GSH when the content of GSH in vivo of plants decreased owing to sulfur deficiency. Moreover,exogenous application of GSSG increased the transcript levels of GSLs synthesis-and sulfur assimilation-related genes under the normal growth condition and under sulfur deficiency. The present work provides new insights into the molecular mechanisms of GSLs biosynthesis underlying glutathione regulation.展开更多
Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batt...Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batteries.In this paper,properties of intrinsic B or Si single-atom doped,and B-Si codoped graphene(GR)and graphdiyne(GDY)were investigated by using density functional theory-based calculations,in which the optimal doping configurations were explored for potential applications in adsorbing sulfur compounds.Results showed that both B or Si single-atom doping and B-Si codoping could substantially enhance the electron transport properties of GR and GDY,improving their surface activity.Notably,B and Si atoms displayed synergistic effects for the codoped configurations,where B-Si codoped GR/GDY exhibited much better performance in the adsorption of sulfurcontaining chemicals than single-atom doped systems.In addition,results demonstrated that,after B-Si codoping,the adsorption energy and charge transfer amounts of GDY with sulfur compounds were much larger than those of GR,indicating that B-Si codoped GDY might be a favorable material for more effectively interacting with sulfur reagents.展开更多
Objective:To investigate the relationship between ambient sulfur dioxide(SO2)exposure and semen quality parameters.Methods:A systematic literature search was conducted to identify relevant studies investigating the as...Objective:To investigate the relationship between ambient sulfur dioxide(SO2)exposure and semen quality parameters.Methods:A systematic literature search was conducted to identify relevant studies investigating the association between SO2 exposure and semen quality parameters.This search encompassed the timeframe from January 2000 to May 2023 and included electronic databases such as Web of Science,Google Scholar,PubMed,Cochrane,and Scopus.Pooled effect estimates with 95%confidence intervals(CI)were calculated using percent changes(PC).The meta-analysis included seven studies with 6711 participants and 15087 semen samples.Results:The results revealed a significant negative association between ambient SO2 exposure and certain semen quality parameters.In particular,SO2 exposure was associated with a significant decrease in progressive motility(PC=0.032;95%CI:-0.063 to-0.001;P=0.044)and sperm concentration(PC=-0.020;95%CI:-0.036 to-0.005;P=0.012).However,no statistically significant associations were observed for total sperm count(PC=-0.038;95%CI:-0.079 to 0.003;P=0.070),seminal fluid volume(PC=-0.009;95%CI:-0.048 to-0.030;P=0.662)and sperm motility(PC=-0.17;95%CI:-0.363 to 0.022;P=0.830).In addition,the results of the subgroup analysis revealed specific variables that were associated with the decrease in relevant sperm parameters.Conclusions:This systematic review and meta-analysis provides compelling evidence supporting a consistent negative association between exposure to ambient SO2 and semen quality parameters.展开更多
The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first ti...The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.展开更多
Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it...Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it is formed.To better understand the for-mation mechanism of authigenic pyrite,we analyzed the isotopic composition,morphology,and distribution of pyrite in the sediment at 500m below the seafloor from Xisha Trough,South China Sea.Mineral morphologies were observed by scanning electron micros-copy and Raman spectrography.X-Ray computed tomography was applied to measure the particle size of pyrite.The size of pyrite crystals in the matrix sediment mainly ranged between 25 and 65µm(av.ca.40µm),although crystals were larger(av.ca.50μm)in the veins.The pyrites had a fine-grained truncated octahedral shape with occasionally well-developed growth steps,which implies the low growth rate and weak anaerobic oxidation of methane-sulfate reduction when pyrite was formed.Theδ^(34)S values of pyrites ranged from+20.8‰Vienna-defined Canyon Diablo Troilite(V-CDT)to+33.2‰V-CDT and from+44.8‰V-CDT to+48.9‰,which suggest two growth stages.In the first stage,with the continuous low methane flux,the pyrite possibly formed in an environment with good access to seawater.In the second stage,the pyrites mainly developed in sediment fractures and appeared in veins,probably due to the limited availability of sulfate.The less exposure of pyrite to the environment in the second stage was probably caused by sediment accumulation or perturbation.In this study,an episodic pyritization process was identified,and the paleoenvironment was reconstructed for the sediment investigated.展开更多
Purpose: In recent years, there has been concern in Japan about the increase in STDs among adolescents aged 15 - 19. In order to prevent STDs and guide adolescents toward desirable sexual behavior, this study’s goal ...Purpose: In recent years, there has been concern in Japan about the increase in STDs among adolescents aged 15 - 19. In order to prevent STDs and guide adolescents toward desirable sexual behavior, this study’s goal was to examine the actual state of STD prevention education taught by school nurses as part of the school curriculum, as well as the kinds of digital content they wish to have for teaching on the subject. Method: An anonymous, self-administered questionnaire was distributed by email and leaflet. Targeting the 100 valid responses received from the surveyed school nurses, descriptive statistics were made for each survey item and comparisons were made between the early- and mid-career groups based on years of experience. Results: 70.0% of respondents reported teaching about STDs in Health & Physical Education classes. School nurses in the early-career group used ready-made materials, while the mid-career group used both ready-made and self-made materials. 95% of respondents reported that they had little or no knowledge of STDs, while 84% reported that they were “good” or “fairly good” at teaching classes on sexuality. Both groups reported difficulty with the topics of “phimosis” and “nocturnal emissions” in the physiological category, “sexual behavior” in the “sex-adjacent” category, and “sexual and reproductive issues” in the psychosocial category. Respondents expressed a need for digital content covering the topics of “sexual violence”, “sexual abuse”, “sexually transmitted diseases”, and “how to turn down sex”. The mid-career group desired digital content for more items than the early-career group, with significant differences in the pathogens involved in sexually transmitted diseases and sex-adjacent items. 32.0% of respondents answered that they had done self-study for sex education classes in the past three years, and both groups desired self-study on “sexually transmitted diseases”, with the mid-career group significantly higher than the early-career group on “cervical cancer & HPV”, “emergency contraceptives”, and “media literacy”. Conclusion: Health & Physical Education is the main subject that covers STDs, and pre-existing materials are commonly used. It is expected that this is due to nurses’ busy schedules and the fact that only one school nurse is assigned to each school. The data collected suggested that nurse teachers want categorized digital content that can be used in the classes they are responsible for, rather than educational content on topics they are not comfortable with. In addition, given the changing environment surrounding sex, it was clear that they wish to understand the realities and needs of the high school students they teach, and desire self-study opportunities to improve their teaching methods.展开更多
Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to t...Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.展开更多
Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge ga...Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.展开更多
Applications of lithium-sulfur(Li-S)batteries are still limited by the sluggish conversion kinetics from polysulfide to Li_(2)S.Although various single-atom catalysts are available for improving the conversion kinetic...Applications of lithium-sulfur(Li-S)batteries are still limited by the sluggish conversion kinetics from polysulfide to Li_(2)S.Although various single-atom catalysts are available for improving the conversion kinetics,the sulfur redox kinetics for Li-S batteries is still not ultrafast.Herein,in this work,a catalyst with dual-single-atom Pt-Co embedded in N-doped carbon nanotubes(Pt&Co@NCNT)was proposed by the atomic layer deposition method to suppress the shuttle effect and synergistically improve the interconversion kinetics from polysulfides to Li_(2)S.The X-ray absorption near edge curves indicated the reversible conversion of Li_(2)Sx on the S/Pt&Co@NCNT electrode.Meanwhile,density functional theory demonstrated that the Pt&Co@NCNT promoted the free energy of the phase transition of sulfur species and reduced the oxidative decomposition energy of Li_(2)S.As a result,the batteries assembled with S/Pt&Co@NCNT electrodes exhibited a high capacity retention of 80%at 100 cycles at a current density of 1.3 mA cm^(−2)(S loading:2.5 mg cm^(−2)).More importantly,an excellent rate performance was achieved with a high capacity of 822.1 mAh g^(−1) at a high current density of 12.7 mA cm^(−2).This work opens a new direction to boost the sulfur redox kinetics for ultrafast Li-S batteries.展开更多
基金supported by the National Natural Science Foundation of China-Shandong Joint Foundation(No.U1806211)。
文摘In this study,we isolated and cultured phytoplankton along the coast of China and measured the cellular carbon,nitrogen,and sulfur contents under four temperatures.The results showed that the contents of the cellular elements varied widely among different phytoplankton.We found that temperature is one of the important factors affecting the carbon,nitrogen,and sulfur contents in phytoplankton cells;however,the degree of influence of temperature is different for different kinds of phytoplankton.By measuring the nitrogen content in cells,we found that the C:N ratio indirectly measured in the experiment fluctuated in the range of 3.50-8.97,and the average C:N ratio was 5.52.In this experiment,we accurately measured the cell elemental contents at different temperatures and transformed the cell count results into carbon,nitrogen,and sulfur contents to express the biomass.This method ensures that the contribution of species that are small in number but with a large cell volume in biomass is considered.Moreover,this method comprehensively considers the interspecific differences of species and the uneven distribution of elements in phytoplankton cells,which is of significance in the estimation of marine carbon and nitrogen budget.The distribution of nitrogen content in marine phytoplankton can well indicate the marine eutrophication caused by human activities.Climate change can affect the community structure and element composition of marine phytoplankton,meanwhile marine carbon and nitrogen element can regulate the climate to a certain extent.
基金financially supported by the National Natural Science Foundation of China (U1705255 and 21975158)the Program of Shanghai Academic Research Leader (20XD1401900)the Key-Area Research and Development Program of Guangdong Province (2019B090908001)。
文摘High-energy density lithium-sulfur(Li-S) batteries have received intensive attention as promising energy storage system.Among diverse sulfur-based cathodes,sulfurized pyrolyzed poly(acrylonitrile)(S@pPAN)cathode delivered superior electrochemical performance.However,the sulfur content of S@pPAN is relatively low(<50 wt%),which significantly limits the energy density.Herein,a hydrogel SA-Cu binder was proposed with a crosslinking network constructed by Cu^(2+) ions.The introduction of Cu^(2+) ions enabled excellent electrochemical behaviors of S@pPAN cathode even with high sulfur content of 52.6 wt% via chemical interaction with sulfur and polysulfide.Moreover,a favorable cathode interphase was formed containing electrochemically active and conductive CuSx.S@pPAN/SA-Cu exhibited a high sulfur utilization of 85.3%,long cycling stability over 1000 cycles and remarkable capacity of 1200 mAh g_(s)^(-1) even at10 C.Furthermore,ascribed to the improved electrode structure,high-loading electrode(sulfur loading:4 mg cm^(-2)) displayed stable cycling with areal capacity of 5.26 mAh cm^(-2)(1315 mAh g_(s)^(-1)) after 40 cycles.This study provides new directions to prepare high-sulfur content and high-loading S@pPAN cathode for higher energy density.
文摘The rules of MIP reactions for catalytic cracking of sulfur compounds and its influence on the sulfur content in the MIP naphtha were studied.The mam factors influencing the sulfur content in the MIP naphtha were thought to be the sulfur content of feedstock and were closely related with the olefin content of naphtha.Taking into account the characteristic features of MIP process,the methods for reducing the sulfur content in the MIP naphtha were comprised of decreasing the sulfur content of feedstock by hydrotreating and decreasing the olefin content of naphtha through promoting hydrogen transfer reactions.Therefore,the EuroⅣclean gasoline with low sulfur content and low olefin content could be obtained directly through the MIP technology.
文摘Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfurization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefin content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.
基金financially supported by the Australian Research Council (ARC) through the ARC Discovery project (DP180102297)Future Fellowship (FT180100705)+1 种基金support from National Natural Science Foundation of China (Grant no. 51572166)support from Shanghai Science & Technology Committee (15520720600).
文摘Nowadays,lithium-sulfur batteries have attracted numerous attention due to their high specific capacity,high energy density,low cost and environmental benignancy.However,there are some critical challenges to be overcome such as low electronic conductivity and capacity fading caused by shuttle effect.Many attempts have been conducted to improve the electrochemical performance by designing effective sulfur hosts.In this paper,we synthesize a concrete-like sulfur/carbon cathode with high sulfur content(84%)by using 3D macroporous hosts with high pore volume.Sophisticated strategies of using polarized carbon framework and polymer coating are applied to synergistically control the dissolution of polysulfides so that the capacity retention and high rate performance can be remarkably enhanced.As a result,the composite exhibits a specific discharge capacity of 820 mAhg-1at a discharge current of 800 mAg-1(approximate to 0.5 C)after 100 cycles,calculated on the integrated mass of composite,which is superior to most report results.
文摘This paper has investigated the influence of gasoline sulfur content on durability of catalytic converter for vehicle exhaust gas. Two gasoline samples with different sulfur contents (equating to 150 μg/g and 50 μg/g of sulfur, respectively) were used to examine the durability and performance of catalytic converter on the bench test. The test results have revealed that in comparison to the influence of sulfur on ageing of catalytic converter the thermal ageing had a more remarkable impact on the performance of catalytic converter, and the performance of catalytic converter could be restored by high-temperature desulfurization process after ageing by the high-sulfur gasoline sample (containing 150 μg/g of sulfur) .
基金the National Natural Science Foundation of China(52103093)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(2021QNRC001)+2 种基金the Jiangxi Provincial Natural Science Foundation(20212BAB214048)Science and Technology Support Project of Shangrao(2020L009,2021J006)Science and Technological Project of Education Department of Jiangxi(GJJ211704)for funding their contributions to this paper。
文摘Lithium sulfur batteries(LSBs)are recognized as promising devices for developing next-generation energy storage systems.In addition,they are attractive rechargeable battery systems for replacing lithium-ion batteries(LIBs)for commercial use owing to their higher theoretical energy density and lower cost compared to those of LIBs.However,LSBs are still beset with some persistent issues that prevent them from being used industrially,such as the unavoidable dissolution of lithium polysulfide intermediates during electrochemical reactions and large volume expansion(up to 80%)upon the formation of Li_(2)S,resulting in serious battery life and safety limitations.In the process of solving these problems,it is necessary to maintain a high sulfur content in the cathode materials to ensure that the LSBs have high energy densities and excellent cycle performance.In this review,the novel preparation methods and cathode materials used for preparing LSBs in recent years are reviewed considering the sulfur content and cycle performance.In addition,the problems and difficulties in practically applying cathode materials are described,and the development trend is discussed.
基金supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region (Grant No. 2022D01B221)he Xinjiang Tianchi Talent Program (2023)+4 种基金the NSRT operators for their assistance during the observationspartly supported by the OperationMaintenance and Upgrading Fund for Astronomical Telescopes and Facility Instrumentsbudgeted from the Ministry of Finance of China and administrated by the Chinese Academy of Sciencesthe Urumqi Nanshan Astronomy and Deep Space Exploration Observation and Research Station of Xinjiang (Grant No. XJYWZ2303)
文摘There have been several studies on sulfur depletion in dense cores like TMC-1(Taurus Molecular Cloud 1),employing updated reaction networks for sulfur species to explain the missing sulfur in the gas within dense clouds.Most of these studies used a C/O ratio of 0.7 or lower.We present NSRT(NanShan 26m Radio Telescope)observations of TMC-1 alongside results from time-dependent chemical simulations using an updated chemical network.Our findings highlight the impact of the C/O ratio on the gas-phase evolution of C2S and C3S.The simulation results show that the C/O ratio is an important parameter,playing a fundamental role in determining the gas-phase abundances of sulfur species in dense cores.
基金funded by the National Natural Science Foundation of China (Grant Nos.31972394 and 31501748)。
文摘Glucosinolates(GSLs) are a group of nitrogen-and sulfur-containing secondary metabolites, synthesized primarily in members of the Brassicaceae family, that play an important role in food flavor, plant antimicrobial activity, resistance to insect attack, stress tolerance, and human anti-cancer effects. As a sulfur-containing compound, glutathione has a strong connection with GSLs biosynthesis as a sulfur donor or redox system, and exists in reduced(glutathione;GSH) and oxidized(glutathione disulfide;GSSG) forms. However, the mechanism of GSH regulating GSLs biosynthesis remainds unclear. Hence, the exogenous therapy to pakchoi under normal growth condition and sulfur deficiency condition were conducted in this work to explore the relevant mechanism. The results showed that exogenous application of buthionine sulfoximine, an inhibitor of GSH synthesis, decreased the transcript levels of GSLs synthesis-related genes and transcription factors, as well as sulfur assimilation-related genes under the normal growth condition. Application of exogenous GSH inhibited the expression of GSLs synthesis-and sulfur assimilation-related genes under the normal condition, while the GSLs biosynthesis and the sulfur assimilation pathway were activated by exogenous application of GSH when the content of GSH in vivo of plants decreased owing to sulfur deficiency. Moreover,exogenous application of GSSG increased the transcript levels of GSLs synthesis-and sulfur assimilation-related genes under the normal growth condition and under sulfur deficiency. The present work provides new insights into the molecular mechanisms of GSLs biosynthesis underlying glutathione regulation.
基金the support of the National Natural Science Foundation of China(Grant No.51472074).
文摘Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batteries.In this paper,properties of intrinsic B or Si single-atom doped,and B-Si codoped graphene(GR)and graphdiyne(GDY)were investigated by using density functional theory-based calculations,in which the optimal doping configurations were explored for potential applications in adsorbing sulfur compounds.Results showed that both B or Si single-atom doping and B-Si codoping could substantially enhance the electron transport properties of GR and GDY,improving their surface activity.Notably,B and Si atoms displayed synergistic effects for the codoped configurations,where B-Si codoped GR/GDY exhibited much better performance in the adsorption of sulfurcontaining chemicals than single-atom doped systems.In addition,results demonstrated that,after B-Si codoping,the adsorption energy and charge transfer amounts of GDY with sulfur compounds were much larger than those of GR,indicating that B-Si codoped GDY might be a favorable material for more effectively interacting with sulfur reagents.
文摘Objective:To investigate the relationship between ambient sulfur dioxide(SO2)exposure and semen quality parameters.Methods:A systematic literature search was conducted to identify relevant studies investigating the association between SO2 exposure and semen quality parameters.This search encompassed the timeframe from January 2000 to May 2023 and included electronic databases such as Web of Science,Google Scholar,PubMed,Cochrane,and Scopus.Pooled effect estimates with 95%confidence intervals(CI)were calculated using percent changes(PC).The meta-analysis included seven studies with 6711 participants and 15087 semen samples.Results:The results revealed a significant negative association between ambient SO2 exposure and certain semen quality parameters.In particular,SO2 exposure was associated with a significant decrease in progressive motility(PC=0.032;95%CI:-0.063 to-0.001;P=0.044)and sperm concentration(PC=-0.020;95%CI:-0.036 to-0.005;P=0.012).However,no statistically significant associations were observed for total sperm count(PC=-0.038;95%CI:-0.079 to 0.003;P=0.070),seminal fluid volume(PC=-0.009;95%CI:-0.048 to-0.030;P=0.662)and sperm motility(PC=-0.17;95%CI:-0.363 to 0.022;P=0.830).In addition,the results of the subgroup analysis revealed specific variables that were associated with the decrease in relevant sperm parameters.Conclusions:This systematic review and meta-analysis provides compelling evidence supporting a consistent negative association between exposure to ambient SO2 and semen quality parameters.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFA0402400)the National Natural Science Foundation of China(Grant Nos.11974358 and 11934004)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB34020000)the Heavy Ion Research Facility in Lanzhou(HIRFL).
文摘The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030003).
文摘Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it is formed.To better understand the for-mation mechanism of authigenic pyrite,we analyzed the isotopic composition,morphology,and distribution of pyrite in the sediment at 500m below the seafloor from Xisha Trough,South China Sea.Mineral morphologies were observed by scanning electron micros-copy and Raman spectrography.X-Ray computed tomography was applied to measure the particle size of pyrite.The size of pyrite crystals in the matrix sediment mainly ranged between 25 and 65µm(av.ca.40µm),although crystals were larger(av.ca.50μm)in the veins.The pyrites had a fine-grained truncated octahedral shape with occasionally well-developed growth steps,which implies the low growth rate and weak anaerobic oxidation of methane-sulfate reduction when pyrite was formed.Theδ^(34)S values of pyrites ranged from+20.8‰Vienna-defined Canyon Diablo Troilite(V-CDT)to+33.2‰V-CDT and from+44.8‰V-CDT to+48.9‰,which suggest two growth stages.In the first stage,with the continuous low methane flux,the pyrite possibly formed in an environment with good access to seawater.In the second stage,the pyrites mainly developed in sediment fractures and appeared in veins,probably due to the limited availability of sulfate.The less exposure of pyrite to the environment in the second stage was probably caused by sediment accumulation or perturbation.In this study,an episodic pyritization process was identified,and the paleoenvironment was reconstructed for the sediment investigated.
文摘Purpose: In recent years, there has been concern in Japan about the increase in STDs among adolescents aged 15 - 19. In order to prevent STDs and guide adolescents toward desirable sexual behavior, this study’s goal was to examine the actual state of STD prevention education taught by school nurses as part of the school curriculum, as well as the kinds of digital content they wish to have for teaching on the subject. Method: An anonymous, self-administered questionnaire was distributed by email and leaflet. Targeting the 100 valid responses received from the surveyed school nurses, descriptive statistics were made for each survey item and comparisons were made between the early- and mid-career groups based on years of experience. Results: 70.0% of respondents reported teaching about STDs in Health & Physical Education classes. School nurses in the early-career group used ready-made materials, while the mid-career group used both ready-made and self-made materials. 95% of respondents reported that they had little or no knowledge of STDs, while 84% reported that they were “good” or “fairly good” at teaching classes on sexuality. Both groups reported difficulty with the topics of “phimosis” and “nocturnal emissions” in the physiological category, “sexual behavior” in the “sex-adjacent” category, and “sexual and reproductive issues” in the psychosocial category. Respondents expressed a need for digital content covering the topics of “sexual violence”, “sexual abuse”, “sexually transmitted diseases”, and “how to turn down sex”. The mid-career group desired digital content for more items than the early-career group, with significant differences in the pathogens involved in sexually transmitted diseases and sex-adjacent items. 32.0% of respondents answered that they had done self-study for sex education classes in the past three years, and both groups desired self-study on “sexually transmitted diseases”, with the mid-career group significantly higher than the early-career group on “cervical cancer & HPV”, “emergency contraceptives”, and “media literacy”. Conclusion: Health & Physical Education is the main subject that covers STDs, and pre-existing materials are commonly used. It is expected that this is due to nurses’ busy schedules and the fact that only one school nurse is assigned to each school. The data collected suggested that nurse teachers want categorized digital content that can be used in the classes they are responsible for, rather than educational content on topics they are not comfortable with. In addition, given the changing environment surrounding sex, it was clear that they wish to understand the realities and needs of the high school students they teach, and desire self-study opportunities to improve their teaching methods.
基金supported by the National Natural Science Foundation of China(22179089)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX23_3245)support from Suzhou Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies,Suzhou,China。
文摘Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.
基金supported by the National Natural Science Foundation of China(Grant No.12102050)the Open Fund of State Key Laboratory of Explosion Science and Technology(Grant No.SKLEST-ZZ-21-18)。
文摘Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.
基金supported by the National Natural Science Foundation of China(22208039)the Basic Scientific Research Project of the Educational Department of Liaoning Province(LJKMZ20220878)+1 种基金and the Dalian Science and Technology Talent Innovation Support Plan(2022RQ036)supported by the Natural Science and Engineering Research Council of Canada(NSERC),the Canada Research Chair Program(CRC),the Canada Foundation for Innovation(CFI),and Western University。
文摘Applications of lithium-sulfur(Li-S)batteries are still limited by the sluggish conversion kinetics from polysulfide to Li_(2)S.Although various single-atom catalysts are available for improving the conversion kinetics,the sulfur redox kinetics for Li-S batteries is still not ultrafast.Herein,in this work,a catalyst with dual-single-atom Pt-Co embedded in N-doped carbon nanotubes(Pt&Co@NCNT)was proposed by the atomic layer deposition method to suppress the shuttle effect and synergistically improve the interconversion kinetics from polysulfides to Li_(2)S.The X-ray absorption near edge curves indicated the reversible conversion of Li_(2)Sx on the S/Pt&Co@NCNT electrode.Meanwhile,density functional theory demonstrated that the Pt&Co@NCNT promoted the free energy of the phase transition of sulfur species and reduced the oxidative decomposition energy of Li_(2)S.As a result,the batteries assembled with S/Pt&Co@NCNT electrodes exhibited a high capacity retention of 80%at 100 cycles at a current density of 1.3 mA cm^(−2)(S loading:2.5 mg cm^(−2)).More importantly,an excellent rate performance was achieved with a high capacity of 822.1 mAh g^(−1) at a high current density of 12.7 mA cm^(−2).This work opens a new direction to boost the sulfur redox kinetics for ultrafast Li-S batteries.