Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leachin...Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leaching processes were reported. Applying ion exchange mechanism in acidized roasting and absorption entrainment mechanism at high temperature, leaching mechanism was discussed. A better explanation of experimental results was given.展开更多
The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combin...The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combined with the rotating disc electrode (RDE).The Koutecky-Levich plot indicated that the dissolved O_2 reduction at the copper electrode was an apparent four-electron process.A correlation between the presence of dissolved O_2 and the formation of Cu_2O,confirmed from XRD,was discussed. Ascorbic a...展开更多
In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxid...In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% (by mass), SO2 concentration of 1.33% (by volume) and oxygen flow rate of 1.5 L.min^-1 from ozone generator.展开更多
Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared...Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared directly with carbonized mother liquor could reach to 24.8% at 410?℃. If n (Na)/ n (V) was adjusted properly, the conversion of SO 2 could be increased to 35.6% at 410?℃. Refined carbonized mother liquor could make the catalytic activity even higher at low temperature, the conversion of SO 2 could be increased to 36.65% at 410?℃. The catalyst was examined with differential thermal analysis. It was found that both endothermic peaks and exothermic peaks of catalyst shifted forward obviously and the catalyst possessed higher activity at low temperature.展开更多
Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was d...Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was done by using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy. Results show that, inhibiting ability of the extract was due to its adsorption onto the metal surface through Langmuir adsorption isotherm. Thermodynamic (Gibbs energy, entropy and heats of adsorption) and kinetic parameters (activation energy and entropy of activation) were also determined. All of these agreed to physical adsorption of inhibitor onto the aluminium surface.展开更多
The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and al...The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.展开更多
A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-co...A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-cobalt oxide ore was carried out by mixing the sample with sulphuric acid followed by baking of the mixture in a muffle furnace. Baking tests were conducted at different conditions such as temperature, time, and varying amounts of acid. The reacted samples were then subjected to water leaching at room temperature to determine the leachability of copper and cobalt from the baked material. The dissolutions of copper and cobalt were dependent on acid concentration with cobalt showing more sensitivity to the amount of acid. Both copper and cobalt were extracted from the baked material within short leaching times and without the addition of reducing agents. The outcome of this work has shown that the sulphuric acid bake-leach process is a possible alternative to the reductive leaching method for copper-cobalt oxide ores.展开更多
A simple method was presented to produce a micro-droplet of sulphuric acid on a pre-selected micro-zone on a pure iron surface with the tip of an AFM cantilever. The three-dimensional shape of the droplet was imaged w...A simple method was presented to produce a micro-droplet of sulphuric acid on a pre-selected micro-zone on a pure iron surface with the tip of an AFM cantilever. The three-dimensional shape of the droplet was imaged with the AC non-contact mode of the AFM, and the liquid/solid interface was observed in situ during corrosion using the contact mode. The substrate surface beneath the droplet was lowered by approximately 19 nm after 3.6 ks of adhesion. This method has important implications for experimental studies of micro-zone corrosion or lubrication.展开更多
文摘Leaching mechanism of acid roasted ore in the spodumene sulphuric acid process was investigated. Experimental results of leaching rates along with variations of leaching temperature in the acidized and neutral leaching processes were reported. Applying ion exchange mechanism in acidized roasting and absorption entrainment mechanism at high temperature, leaching mechanism was discussed. A better explanation of experimental results was given.
文摘The kinetics of dissolved O_2 reduction and hydrogen evolution reactions on copper surface was studied in naturally aerated and air and O_2-saturated 0.50 mol/L H_2SO_4 solutions using polarization measurements combined with the rotating disc electrode (RDE).The Koutecky-Levich plot indicated that the dissolved O_2 reduction at the copper electrode was an apparent four-electron process.A correlation between the presence of dissolved O_2 and the formation of Cu_2O,confirmed from XRD,was discussed. Ascorbic a...
文摘In this study, the oxidation rates of sulfur dioxide (SO2) in sulphuric acid solution by ozone and oxygen were compared, and the oxidation mechanism of ozone on SO2 was investigated. The results showed that the oxidation-reduction potential of the acidic solution was enhanced, the transformation rate of sulfuric acid to sulphuric acid was increased and the absorption driving force was improved in the presence of ozone. By comparing the amount of sulfate ions measured in the experiments and the theoretical amount of sulfate ions calculated from the amount of ozone consumed in the reaction, it can be confirmed that oxygen free radicals from dissociation of ozone are reactive as an efficient oxidant and oxygen from ozone generator participates in the reaction with SO2. 0.602 mol of effective oxygen was introduced into the reaction by one mole of ozone in 10.15 rain at sulphuric acid concentration of 3% (by mass), SO2 concentration of 1.33% (by volume) and oxygen flow rate of 1.5 L.min^-1 from ozone generator.
文摘Cs Rb V series low temperature sulphuric acid catalyst was prepared for the first time by using carbonized mother liquor containing alkali metal salts. The results show that the conversion of SO 2 on catalyst prepared directly with carbonized mother liquor could reach to 24.8% at 410?℃. If n (Na)/ n (V) was adjusted properly, the conversion of SO 2 could be increased to 35.6% at 410?℃. Refined carbonized mother liquor could make the catalytic activity even higher at low temperature, the conversion of SO 2 could be increased to 36.65% at 410?℃. The catalyst was examined with differential thermal analysis. It was found that both endothermic peaks and exothermic peaks of catalyst shifted forward obviously and the catalyst possessed higher activity at low temperature.
文摘Inhibition of aluminium corrosion using C. papaya leaves extract in 1.0 M H2SO4 was investigated by using gravimetric analysis at various concentrations and temperatures: 303 K, 313 K and 323 K. Characterization was done by using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy. Results show that, inhibiting ability of the extract was due to its adsorption onto the metal surface through Langmuir adsorption isotherm. Thermodynamic (Gibbs energy, entropy and heats of adsorption) and kinetic parameters (activation energy and entropy of activation) were also determined. All of these agreed to physical adsorption of inhibitor onto the aluminium surface.
文摘The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.
文摘A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-cobalt oxide ore was carried out by mixing the sample with sulphuric acid followed by baking of the mixture in a muffle furnace. Baking tests were conducted at different conditions such as temperature, time, and varying amounts of acid. The reacted samples were then subjected to water leaching at room temperature to determine the leachability of copper and cobalt from the baked material. The dissolutions of copper and cobalt were dependent on acid concentration with cobalt showing more sensitivity to the amount of acid. Both copper and cobalt were extracted from the baked material within short leaching times and without the addition of reducing agents. The outcome of this work has shown that the sulphuric acid bake-leach process is a possible alternative to the reductive leaching method for copper-cobalt oxide ores.
基金Part of this work was supported by MEXT.HAITEKU, 2004- JSPS Grant-in-Aid for Scientific Research (18560093)
文摘A simple method was presented to produce a micro-droplet of sulphuric acid on a pre-selected micro-zone on a pure iron surface with the tip of an AFM cantilever. The three-dimensional shape of the droplet was imaged with the AC non-contact mode of the AFM, and the liquid/solid interface was observed in situ during corrosion using the contact mode. The substrate surface beneath the droplet was lowered by approximately 19 nm after 3.6 ks of adhesion. This method has important implications for experimental studies of micro-zone corrosion or lubrication.