The supercritical CO2 Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton c...The supercritical CO2 Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.展开更多
As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates hav...As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.展开更多
Nuclear power plants exhibit non-linear and time-variable dynamics.Therefore,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor...Nuclear power plants exhibit non-linear and time-variable dynamics.Therefore,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWR)is a fourth-generation conceptual reactor.In an SCWR,the non-linear dynamics of the reactor require a controller capable of control-ling the nonlinearities.In this study,a pressure-tube-type SCWR was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled simultaneously.In an SCWR,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power maneuvering.Reactor point kinetics equations with three groups of delayed neutrons were used in the simulation.Higher-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous studies.The controlled parameters were reactor power,steam temperature,and pressure.Notably,for these parameters,the PI controller had certain instabilities in the presence of disturbances.The classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering phenomenon.HOSMC was highly accurate and stable and had a small computational cost.In reality,it followed the desired values without oscillations and chattering.展开更多
Perilla frutescens seed (PFS) oil is reported to inhibit skin photoaging;however, its effect on melanogenesis has not yet been investigated. Herein, we tested the anti-melanogenesis activity of an oil-based extract fr...Perilla frutescens seed (PFS) oil is reported to inhibit skin photoaging;however, its effect on melanogenesis has not yet been investigated. Herein, we tested the anti-melanogenesis activity of an oil-based extract from PFS with supercritical carbon dioxide (scCO<sub>2</sub>). In a cell culture system, B16 mouse melanoma cells were treated with the PFS scCO<sub>2</sub> extract and other samples. The PFS scCO<sub>2</sub> extract decreased melanin production by approximately 90% in B16 mouse melanoma cells without cytotoxicity at 100 μg/mL. This effect was greater than that of the well-known melanogenesis inhibitor, kojic acid. Although a hexane-extracted PFS oil and a squeezed PFS oil also decreased melanin production in the B16 cells, the inhibitory effect of the PFS scCO<sub>2</sub> extract was higher than both of these. Chemical analysis of the PFS scCO<sub>2</sub> extract and squeezed PFS oil showed that almost 90% of the components of both oils were α-linolenic acid, linoleic acid, and oleic acid. Furthermore, the ratio of those three fatty acids across both samples was almost the same. When the three fatty acids were mixed in the same ratio as in the PFS scCO<sub>2</sub> extract, the IC<sub>50</sub> of the mixture for melanin production in B16 melanoma cells was identical to that of the PFS scCO<sub>2</sub> extract. However, the IC<sub>50</sub> of the squeezed PFS oil was approximately 6.6 times higher than that of the mixture. Although those fatty acids are the main inhibitory ingredients against melanin production in all of the extracts, some factor(s) in the squeezed PFS reduce their affinity with the cells. These results indicated that the PFS scCO<sub>2</sub> extract could be a superior melanogenesis inhibitor. Although its main ingredients are probably the same as those of the squeezed PFS oil, it is necessary to extract with scCO<sub>2</sub> for stronger anti-melanogenesis activity.展开更多
Since the mechanisms of methane-mudstone interactions are important for estimating shale gas reserves,methane adsorption under supercritical conditions of 30 MPa pressure and 303.15,333.15,363.15 K temperatures was st...Since the mechanisms of methane-mudstone interactions are important for estimating shale gas reserves,methane adsorption under supercritical conditions of 30 MPa pressure and 303.15,333.15,363.15 K temperatures was studied to measure the excess methane adsorption in two mudstone samples from Yanchang Formation,Ordos Basin.Excess adsorption features inflection points where the amount of adsorbed gas changes from increasing to decreasing concentrations.Three methods(fixed,slope,and freely fitted density)were applied to calculate the adsorbed-phase density(rad),which was then used to fit the measured excess adsorption.Two criteria,the goodness-of-fit and whether the fitting can obtain reasonable absolute adsorption,were applied to determine the most accurate model.Results indicated that the supercritical Dubinin-Radushkevich(SDR)model with freely fitted rad was the most reasonable model.The volume of adsorbed methane at 363.15 K is close to the micropore(d<2 nm)volume of the corresponding mudstone.Considering the actual geological conditions,the adsorbed gas should be predominantly stored in micropores.Thermodynamic parameters reveal that the methane adsorption on mudstone is a physisorption process that is jointly controlled by the heterogeneity of,and interaction forces between the methane molecule and,the rock surface.展开更多
Supercritical carbon dioxide(ScCO_(2))fracturing has great advantages and prospects in both shale gas exploitation and CO_(2)storage.This paper reviews current laboratory experimental methods and results for sedimenta...Supercritical carbon dioxide(ScCO_(2))fracturing has great advantages and prospects in both shale gas exploitation and CO_(2)storage.This paper reviews current laboratory experimental methods and results for sedimentary rocks fractured by ScCO_(2).The breakdown pressure,fracture parameters,mineral composition,bedding plane angle and permeability are discussed.We also compare the differences between sedimentary rock and granite fractured by ScCO_(2),ultimately noting problems and suggesting solutions and strategies for the future.The analysis found that the breakdown pressure of ScCO_(2)was reduced 6.52%–52.31%compared with that of using water.ScCO_(2)tends to produce a complex fracture morphology with significantly higher permeability.When compared with water,the fracture aperture of ScCO_(2)was decreased by 4.10%–72.33%,the tortuosity of ScCO_(2)was increased by 5.41%–70.98%and the fractal dimension of ScCO_(2)was increased by 4.55%–8.41%.The breakdown pressure of sandstone is more sensitive to the nature of the fracturing fluid,but fracture aperture is less sensitive to fracturing fluid than for shale and coal.Compared with granite,the tortuosity of sedimentary rock is more sensitive to the fracturing fluid and the fracture fractal dimension is less sensitive to the fracturing fluid.Existing research shows that ScCO_(2)has the advantages of low breakdown pressure,good fracture creation and environmental protection.It is recommended that research be conducted in terms of sample terms,experimental conditions,effectiveness evaluation and theoretical derivation in order to promote the application of ScCO_(2)reformed reservoirs in the future.展开更多
As an emerging waterless fracturing technology,supercritical carbon dioxide(SC-CO_(2))fracturing can reduce reservoir damage and dependence on water resources,and can also promote the reservoir stimulation and geologi...As an emerging waterless fracturing technology,supercritical carbon dioxide(SC-CO_(2))fracturing can reduce reservoir damage and dependence on water resources,and can also promote the reservoir stimulation and geological storage of carbon dioxide(CO_(2)).It is vital to figure out the laws in SC-CO_(2)fracturing for the large-scale field implementation of this technology.This paper reviews the numerical simulations of wellbore flow and heat transfer,fracture initiation and propagation,and proppant transport in SC-CO_(2)fracturing,including the numerical approaches and the obtained findings.It shows that the variations of wellbore temperature and pressure are complex and strongly transient.The wellhead pressure can be reduced by tubing and annulus co-injection or adding drag reducers into the fracturing fluid.Increasing the temperature of CO_(2)with wellhead heating can promote CO_(2)to reach the well bottom in the supercritical state.Compared with hydraulic fracturing,SC-CO_(2)fracturing has a lower fracture initiation pressure and can form a more complex fracture network,but the fracture width is narrower.The technology of SC-CO_(2)fracturing followed by thickened SC-CO_(2)fracturing,which combines with high injection rates and ultra-light proppants,can improve the placement effect of proppants while improving the complexity and width of fractures.The follow-up research is required to get a deeper insight into the SC-CO_(2)fracturing mechanisms and develop cost-effective drag reducers,thickeners,and ultra-light proppants.This paper can guide further research and promote the field application of SC-CO_(2)fracturing technology.展开更多
The flow and heat transfer characteristics of n-decane in the sub-millimeter spiral tube(SMST) at supercritical pressure(p = 3 MPa) are studied by the RNG k-ε numerical model in this paper. The effects of various Rey...The flow and heat transfer characteristics of n-decane in the sub-millimeter spiral tube(SMST) at supercritical pressure(p = 3 MPa) are studied by the RNG k-ε numerical model in this paper. The effects of various Reynolds numbers(Re) and structural parameters pitch(s) and spiral diameter(D) are analyzed.Results indicate that the average Nusselt numberNu and friction factorNu increase with an increase in Re, and decrease with an increase in D/d(tube diameter). In terms of the structural parameter s/d, it is found that as s/d increases, the Nu first increase, and then decrease. and the critical structural parameter is s/d = 4. Compared with the straight tube, the SMST can improve Nu by 34.8% at best, while it can improve Nu by 102.1% at most. In addition, a comprehensive heat transfer coefficient is applied to analyze the thermodynamic properties of SMST. With the optimal structural parameters of D/d = 6 and s/d = 4, the comprehensive heat transfer factor of supercritical pressure hydrocarbon fuel in the SMST can reach 1.074. At last, correlations of the average Nusselt number and friction factor are developed to predict the flow and heat transfer of n-decane at supercritical pressure.展开更多
To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareo...To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareous laminated shale samples mined from the lower submember of the third member of Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin.After that,grid nanoindentation tests were conducted to analyze the influence of immersion time,pressure,and temperature on micro-mechanical parameters.Experimental results show that the damage of shale caused by the water/supercritical CO_(2)-rock interaction was mainly featured by the generation of induced fractures in the clay-rich laminae.In the case of soaking with supercritical CO_(2),the aperture of induced fracture was smaller.Due to the existence of induced fractures,the statistical averages of elastic modulus and hardness both decreased.Meanwhile,compaction and stress-induced tensile fractures could be observed around the laminae.Generally,the longer the soaking time,the higher the soaking pressure and temperature,the more significant the degradation of micro-mechanical parameters is.Compared with water-rock interaction,the supercritical CO_(2)-rock interaction caused a lower degree of mechanical damage on the shale surface.Thus,supercritical CO_(2)can be used as a fracturing fluid to prevent the surface softening of induced fractures in shale reservoirs.展开更多
[Objectives]Laoshan black tea was subjected to supercritical CO_(2) extraction. [Methods]The extraction conditions of Laoshan black tea were studied by an orthogonal experiment and optimized by response surface method...[Objectives]Laoshan black tea was subjected to supercritical CO_(2) extraction. [Methods]The extraction conditions of Laoshan black tea were studied by an orthogonal experiment and optimized by response surface methodology. [Results] The optimum extraction conditions of black tea extract by supercritical CO_(2) extraction were as follows: extraction pressure 23.53 MPa, extraction time 1.73 h, and extraction temperature 49.75 ℃, with which the extract yield could reach 5.15% theoretically. [Conclusions] Based on the traditional extraction process, a supercritical extraction method optimized by response surface methodology and a unique extraction process were formed, which enriches the extraction processes and methods of natural raw materials.展开更多
In this paper, a system of Lorenz-type ordinary differential equations is considered and, under some assumptions about the parameter space, the presence of the supercritical non-degenerate Hopf bifurcation is demonstr...In this paper, a system of Lorenz-type ordinary differential equations is considered and, under some assumptions about the parameter space, the presence of the supercritical non-degenerate Hopf bifurcation is demonstrated. The technical tool used consists of the Central Manifold theorem, a well-known formula to calculate the Lyapunov coefficient and Hopf’s Theorem. For particular values of the parameters in the parameter space established in the main result of this work, a graph is presented that describes the evolution of the trajectories, obtained by means of numerical simulation.展开更多
An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was dev...An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.展开更多
In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC ...In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.展开更多
It is well known that seawater that migrates deep into the Earth’s crust will pass into its supercritical domain at temperatures above 407°C and pressures above 298 bars. In the oceanic crust, these pressures ar...It is well known that seawater that migrates deep into the Earth’s crust will pass into its supercritical domain at temperatures above 407°C and pressures above 298 bars. In the oceanic crust, these pressures are attained at depths of 3 km below sea surface, and sufficiently high temperatures are found near intruding magmas, which have temperatures in the range of 800°C to 1200°C. The physico-chemical behaviour of seawater changes dramatically when passing into the supercritical domain. A supercritical water vapour (ScriW) is formed with a density of 0.3 g/cc and a strongly reduced dipolar character. This change in polarity is causing the ScriW to lose its solubility of the common sea salts (chlorides and sulphates) and a spontaneous precipitation of sea salts takes place in the pore system. However, this is only one of many cases where the very special properties of ScriW affect its surroundings. The objective of this paper is to increase awareness of the many geological processes that are initiated and governed by ScriW. This includes interactions between ScriW and its geological surroundings to initiate and drive processes that are of major importance to the dynamics and livelihood of our planet. ScriW is the driver of volcanism associated with subduction zones, as ScriW deriving from the subduction slab is interacting with the mantle rocks and reducing their melting point. ScriW is also initiating serpentinization processes where olivines in the mantle rocks (e.g. peridotite) are transformed to serpentine minerals upon the uptake of OH-groups from hydrolysed water. The simultaneous oxidation of Fe2+ dissolved from iron-bearing pyroxenes and olivines leads to the formation of magnetite and hydrogen, and consequently, to a very reducing environment. ScriW may also be the potential starter and driver of the poorly understood mud and asphalt volcanism;both submarine and terrestrial. Furthermore, the lack of polarity of the water molecules in ScriW gives the ScriW vapour the potential to dissolve organic matter and petroleum. The same applies to supercritical brines confined in subduction slabs. If these supercritical water vapours migrate upwards to reach the critical point, the supercritical vapour is condensed into steam and dissolved petroleum is partitioned from the water phase to become a separate fluid phase. This opens up the possibility of transporting petroleum long distances when mixed with ScriW. Therefore, we may, popularly, say that ScriW drives a gigantic underground refinery system and also a salt factory. It is suggested that the result of these processes is that ScriW is rejuvenating the world’s ocean waters, as all of the ocean water circulates into the porous oceanic crust and out again in cycles of less than a million years. In summary, we suggest that ScriW participates in and is partly responsible for: 1) Ocean water rejuvenation and formation;2) Fundamental geological processes, such as volcanism, earthquakes, and meta-morphism (including serpentinization);3) Solid salt production, accumulation, transportation, and (salt) dome formation;4) The initiation and driving of mud, serpentine, and asphalt volcanoes;5) Dissolution of organic matter and petroleum, including transportation and phase separation (fractionation), when passing into the subcritical domain of (liquid) water.展开更多
In this paper, we show that supercritical fluids have a greater significance in the generation of pegmatites,and for ore-forming processes related to granites than is usually assumed. We show that the supercritical me...In this paper, we show that supercritical fluids have a greater significance in the generation of pegmatites,and for ore-forming processes related to granites than is usually assumed. We show that the supercritical melt or fluid is a silicate phase in which volatiles; principally H_2O are completely miscible in all proportions at magmatic temperatures and pressures. This phase evolves from felsic melts and changes into hydrothermal fluids, and its unique properties are particularly important in sequestering and concentrating low abundance elements, such as metals. In our past research, we have focused on processes observed at upper crustal levels, however extensive work by us and other researchers have demonstrated that supercritical melt/fluids should be abundant in melting zones at deep-crustal levels too. We propose that these fluids may provide a connecting link between lower and upper crustal magmas,and a highly efficient transport mechanism for usually melt incompatible elements. In this paper, we explore the unique features of this fluid which allow the partitioning of variouselements and compounds, potentially up to extreme levels,and may explain various features both of mineralization and the magmas that produced them.展开更多
Tea is a widely consumed beverage and has many important physiological properties and potential health benefits. In this study, a novel method based on supercritical fluid chromatography coupled with mass spectrometry...Tea is a widely consumed beverage and has many important physiological properties and potential health benefits. In this study, a novel method based on supercritical fluid chromatography coupled with mass spectrometry (SFC-MS) was developed to simultaneously determine 11 amino acids in different types of tea (green teas, Oolong tea, black tea and Pu-erh tea). The separation conditions for the analysis of the selected amino acids including the column type, temperature and backpressure as well as the type of additive, were carefully optimized. The best separation of the 11 amino acids was obtained by adding water (5%, v/v) and trifluoroacetic acid (0.4%, v/v) to the organic modifier (methanol). Finally, the developed SFC-MS method was fully validated and successfully applied to the determination of these amino acids in six different tea samples. Good linearity (r ≥ 0.993), precision (RSDs≤ 2.99%), accuracy (91.95%-107.09%) as well as good sample stability were observed. The limits of detection ranged from 1.42 to 14.69 ng/mL, while the limits of quantification were between 4.53 and 47.0 ng/mL. The results indicate that the contents of the 11 amino acids in the six different tea samples are greatly influenced by the degree of fermentation. The proposed SFC-MS method shows a great potential for further investigation of tea varieties.展开更多
We thank Tan Mingxuan et al.(2017)for their comments stimulated by our short paper in the recent Acta Geologica Sinica(English edition).We are grateful for the opportunity to expand on the model of the supercritical h...We thank Tan Mingxuan et al.(2017)for their comments stimulated by our short paper in the recent Acta Geologica Sinica(English edition).We are grateful for the opportunity to expand on the model of the supercritical hyperpycnal flow deposits in the Beilaishi section on the Lingshan Island,and to explain why the model proposed by Tan Mingxuan et al.(2017)cannot explain the bulk展开更多
The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deteriorati...The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deterioration along the circumferential direction.The governing equations of mass,momentum and energy have been solved using the pressure-based segregated solver based on the finite volume method.The re-normalization group(RNG)k-εturbulence model with an enhanced wall treatment was selected.Considering the heat conduction in the solid wall,the mechanism of heat transfer deterioration and the buoyancy effect on deteriorated heat transfer were discussed.The evolution of secondary flow was analyzed.Effects of the outer-wall heat flux,mass flux,pressure and tube thermal conductivity on heat transfer were investigated.Moreover,the buoyancy criterion and the heat transfer correlation were obtained.Results indicate that the poor flow performance of near-wall fluid causes the pseudo-film boiling,further leads to the heat transfer deterioration.The strong buoyancy has an effect of enhancing the heat transfer at the bottom of tube,and weakening the heat transfer at the top of tube,which results in the non-uniform inner-wall temperature and heat flux distributions.Decreasing the ratio of outer-wall heat flux and mass flux,increasing the pressure could weaken the heat transfer difference along the circumferential direction,while the effect of thermal conductivity of tube on the circumferential parameters distributions is more complicated.When the buoyancy criterion of(Grq/Grth)max≤0.8 is satisfied,the effect of buoyancy could be ignored.The new correlations work well for non-uniform heat transfer predictions.展开更多
The objective of this study was to improve the dissolution and bioavailability of silymarin(SM).Solid dispersions(SDs)were prepared using solution-enhanced dispersion by supercritical fluids(SEDS)and evaluated in vitr...The objective of this study was to improve the dissolution and bioavailability of silymarin(SM).Solid dispersions(SDs)were prepared using solution-enhanced dispersion by supercritical fluids(SEDS)and evaluated in vitro and in vivo,compared with pure SM powder.The particle sizes,stability,and contents of residual solvent of the prepared SM-SDs with SEDS and solvent evaporation(SE)were investigated.Four polymer matrix materials were evaluated for the preparation of SM-SD-SEDS,and the hydrophilic polymer,polyvinyl pyrrolidone K17,was selected with a ratio of 1:5 between SM and the polymer.Physicochemical analyses using X-ray diffraction and differential scanning calorimetry indicated that SM was dispersed in SD in an amorphous state.The optimized SM-SD-SEDS showed no loss of SM after storage for 6 months and negligible residual solvent(ethanol)was detected using gas chromatography.In vitro drug release was increased from the SM-SDSEDS,as compared with pure SM powder or SM-SD-SE.In vivo,the area under the rat plasma SM concentration-time curve and the maximum plasma SM concentration were 2.4-fold and 1.9-fold higher,respectively,after oral administration of SM-SD-SEDS as compared with an aqueous SM suspension.These results illustrated the potential of using SEDS to prepare SM-SD,further improving the biopharmaceutical properties of this compound.展开更多
基金This work was supported of National Natural Science Foundation of China Fund(No.52306033)State Key Laboratory of Engines Fund(No.SKLE-K2022-07)the Jiangxi Provincial Postgraduate Innovation Special Fund(No.YC2022-s513).
文摘The supercritical CO2 Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.
基金financial support from the National Key Research and Development Program of China(2020YFA0710202)the National Natural Science Foundation of China(21978043,U1662130)+1 种基金Inner Mongolia University of Technology Scientific Research Initial Funding(DC2300001240)Talent Introduction Support Project of Inner Mongolia(DC2300001426).
文摘As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.
文摘Nuclear power plants exhibit non-linear and time-variable dynamics.Therefore,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWR)is a fourth-generation conceptual reactor.In an SCWR,the non-linear dynamics of the reactor require a controller capable of control-ling the nonlinearities.In this study,a pressure-tube-type SCWR was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled simultaneously.In an SCWR,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power maneuvering.Reactor point kinetics equations with three groups of delayed neutrons were used in the simulation.Higher-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous studies.The controlled parameters were reactor power,steam temperature,and pressure.Notably,for these parameters,the PI controller had certain instabilities in the presence of disturbances.The classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering phenomenon.HOSMC was highly accurate and stable and had a small computational cost.In reality,it followed the desired values without oscillations and chattering.
文摘Perilla frutescens seed (PFS) oil is reported to inhibit skin photoaging;however, its effect on melanogenesis has not yet been investigated. Herein, we tested the anti-melanogenesis activity of an oil-based extract from PFS with supercritical carbon dioxide (scCO<sub>2</sub>). In a cell culture system, B16 mouse melanoma cells were treated with the PFS scCO<sub>2</sub> extract and other samples. The PFS scCO<sub>2</sub> extract decreased melanin production by approximately 90% in B16 mouse melanoma cells without cytotoxicity at 100 μg/mL. This effect was greater than that of the well-known melanogenesis inhibitor, kojic acid. Although a hexane-extracted PFS oil and a squeezed PFS oil also decreased melanin production in the B16 cells, the inhibitory effect of the PFS scCO<sub>2</sub> extract was higher than both of these. Chemical analysis of the PFS scCO<sub>2</sub> extract and squeezed PFS oil showed that almost 90% of the components of both oils were α-linolenic acid, linoleic acid, and oleic acid. Furthermore, the ratio of those three fatty acids across both samples was almost the same. When the three fatty acids were mixed in the same ratio as in the PFS scCO<sub>2</sub> extract, the IC<sub>50</sub> of the mixture for melanin production in B16 melanoma cells was identical to that of the PFS scCO<sub>2</sub> extract. However, the IC<sub>50</sub> of the squeezed PFS oil was approximately 6.6 times higher than that of the mixture. Although those fatty acids are the main inhibitory ingredients against melanin production in all of the extracts, some factor(s) in the squeezed PFS reduce their affinity with the cells. These results indicated that the PFS scCO<sub>2</sub> extract could be a superior melanogenesis inhibitor. Although its main ingredients are probably the same as those of the squeezed PFS oil, it is necessary to extract with scCO<sub>2</sub> for stronger anti-melanogenesis activity.
基金This work was supported by the Natural Science Basic Research Program of Shaanxi[No.2022JQ-2912021JQ-234]+1 种基金the China Postdoctoral Science Foundation[No.2021M692735]the Fundamental Research Funds for the Central Universities,Chang'an University[No.300102271305].
文摘Since the mechanisms of methane-mudstone interactions are important for estimating shale gas reserves,methane adsorption under supercritical conditions of 30 MPa pressure and 303.15,333.15,363.15 K temperatures was studied to measure the excess methane adsorption in two mudstone samples from Yanchang Formation,Ordos Basin.Excess adsorption features inflection points where the amount of adsorbed gas changes from increasing to decreasing concentrations.Three methods(fixed,slope,and freely fitted density)were applied to calculate the adsorbed-phase density(rad),which was then used to fit the measured excess adsorption.Two criteria,the goodness-of-fit and whether the fitting can obtain reasonable absolute adsorption,were applied to determine the most accurate model.Results indicated that the supercritical Dubinin-Radushkevich(SDR)model with freely fitted rad was the most reasonable model.The volume of adsorbed methane at 363.15 K is close to the micropore(d<2 nm)volume of the corresponding mudstone.Considering the actual geological conditions,the adsorbed gas should be predominantly stored in micropores.Thermodynamic parameters reveal that the methane adsorption on mudstone is a physisorption process that is jointly controlled by the heterogeneity of,and interaction forces between the methane molecule and,the rock surface.
基金funded by the National Natural Science Foundation of China(Grant Nos.42141009,41825018,41888101 and 41902289)the Key Research Program of the Institute of Geology and Geophysics,CAS(Grant No.IGGCAS-202201)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904)。
文摘Supercritical carbon dioxide(ScCO_(2))fracturing has great advantages and prospects in both shale gas exploitation and CO_(2)storage.This paper reviews current laboratory experimental methods and results for sedimentary rocks fractured by ScCO_(2).The breakdown pressure,fracture parameters,mineral composition,bedding plane angle and permeability are discussed.We also compare the differences between sedimentary rock and granite fractured by ScCO_(2),ultimately noting problems and suggesting solutions and strategies for the future.The analysis found that the breakdown pressure of ScCO_(2)was reduced 6.52%–52.31%compared with that of using water.ScCO_(2)tends to produce a complex fracture morphology with significantly higher permeability.When compared with water,the fracture aperture of ScCO_(2)was decreased by 4.10%–72.33%,the tortuosity of ScCO_(2)was increased by 5.41%–70.98%and the fractal dimension of ScCO_(2)was increased by 4.55%–8.41%.The breakdown pressure of sandstone is more sensitive to the nature of the fracturing fluid,but fracture aperture is less sensitive to fracturing fluid than for shale and coal.Compared with granite,the tortuosity of sedimentary rock is more sensitive to the fracturing fluid and the fracture fractal dimension is less sensitive to the fracturing fluid.Existing research shows that ScCO_(2)has the advantages of low breakdown pressure,good fracture creation and environmental protection.It is recommended that research be conducted in terms of sample terms,experimental conditions,effectiveness evaluation and theoretical derivation in order to promote the application of ScCO_(2)reformed reservoirs in the future.
基金funded by the Henan Institute for Chinese Development Strategy of Engineering&Technology(Grant No.2022HENZDA02)the China Scholarship Council(No.202208080058).
文摘As an emerging waterless fracturing technology,supercritical carbon dioxide(SC-CO_(2))fracturing can reduce reservoir damage and dependence on water resources,and can also promote the reservoir stimulation and geological storage of carbon dioxide(CO_(2)).It is vital to figure out the laws in SC-CO_(2)fracturing for the large-scale field implementation of this technology.This paper reviews the numerical simulations of wellbore flow and heat transfer,fracture initiation and propagation,and proppant transport in SC-CO_(2)fracturing,including the numerical approaches and the obtained findings.It shows that the variations of wellbore temperature and pressure are complex and strongly transient.The wellhead pressure can be reduced by tubing and annulus co-injection or adding drag reducers into the fracturing fluid.Increasing the temperature of CO_(2)with wellhead heating can promote CO_(2)to reach the well bottom in the supercritical state.Compared with hydraulic fracturing,SC-CO_(2)fracturing has a lower fracture initiation pressure and can form a more complex fracture network,but the fracture width is narrower.The technology of SC-CO_(2)fracturing followed by thickened SC-CO_(2)fracturing,which combines with high injection rates and ultra-light proppants,can improve the placement effect of proppants while improving the complexity and width of fractures.The follow-up research is required to get a deeper insight into the SC-CO_(2)fracturing mechanisms and develop cost-effective drag reducers,thickeners,and ultra-light proppants.This paper can guide further research and promote the field application of SC-CO_(2)fracturing technology.
基金support by the Scientific Research Start-up Funds for introducing Talent in the Sichuan University (20822041C4014)National Science and Technology Major Project of China (2017-I-0004-0004)。
文摘The flow and heat transfer characteristics of n-decane in the sub-millimeter spiral tube(SMST) at supercritical pressure(p = 3 MPa) are studied by the RNG k-ε numerical model in this paper. The effects of various Reynolds numbers(Re) and structural parameters pitch(s) and spiral diameter(D) are analyzed.Results indicate that the average Nusselt numberNu and friction factorNu increase with an increase in Re, and decrease with an increase in D/d(tube diameter). In terms of the structural parameter s/d, it is found that as s/d increases, the Nu first increase, and then decrease. and the critical structural parameter is s/d = 4. Compared with the straight tube, the SMST can improve Nu by 34.8% at best, while it can improve Nu by 102.1% at most. In addition, a comprehensive heat transfer coefficient is applied to analyze the thermodynamic properties of SMST. With the optimal structural parameters of D/d = 6 and s/d = 4, the comprehensive heat transfer factor of supercritical pressure hydrocarbon fuel in the SMST can reach 1.074. At last, correlations of the average Nusselt number and friction factor are developed to predict the flow and heat transfer of n-decane at supercritical pressure.
基金Supported by the Project of the Academic Department of the Chinese Academy of Sciences (KKBE170026)Project of Science and Technology Department of Sinopec (P21039-3,P20049-1)Independent Research and Development Project of Sinopec Petroleum Exploration and Development Research Institute (YK-2021-29-2)。
文摘To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareous laminated shale samples mined from the lower submember of the third member of Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin.After that,grid nanoindentation tests were conducted to analyze the influence of immersion time,pressure,and temperature on micro-mechanical parameters.Experimental results show that the damage of shale caused by the water/supercritical CO_(2)-rock interaction was mainly featured by the generation of induced fractures in the clay-rich laminae.In the case of soaking with supercritical CO_(2),the aperture of induced fracture was smaller.Due to the existence of induced fractures,the statistical averages of elastic modulus and hardness both decreased.Meanwhile,compaction and stress-induced tensile fractures could be observed around the laminae.Generally,the longer the soaking time,the higher the soaking pressure and temperature,the more significant the degradation of micro-mechanical parameters is.Compared with water-rock interaction,the supercritical CO_(2)-rock interaction caused a lower degree of mechanical damage on the shale surface.Thus,supercritical CO_(2)can be used as a fracturing fluid to prevent the surface softening of induced fractures in shale reservoirs.
文摘[Objectives]Laoshan black tea was subjected to supercritical CO_(2) extraction. [Methods]The extraction conditions of Laoshan black tea were studied by an orthogonal experiment and optimized by response surface methodology. [Results] The optimum extraction conditions of black tea extract by supercritical CO_(2) extraction were as follows: extraction pressure 23.53 MPa, extraction time 1.73 h, and extraction temperature 49.75 ℃, with which the extract yield could reach 5.15% theoretically. [Conclusions] Based on the traditional extraction process, a supercritical extraction method optimized by response surface methodology and a unique extraction process were formed, which enriches the extraction processes and methods of natural raw materials.
文摘In this paper, a system of Lorenz-type ordinary differential equations is considered and, under some assumptions about the parameter space, the presence of the supercritical non-degenerate Hopf bifurcation is demonstrated. The technical tool used consists of the Central Manifold theorem, a well-known formula to calculate the Lyapunov coefficient and Hopf’s Theorem. For particular values of the parameters in the parameter space established in the main result of this work, a graph is presented that describes the evolution of the trajectories, obtained by means of numerical simulation.
基金financially supported by the National Natural Science Foundation of China(No.21874153)Science Foundation of China University of Petroleum,Beijing(No.2462017BJB09)PetroChina Innovation Foundation(No.2016D-5007-0402)。
文摘An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.
文摘In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.
文摘It is well known that seawater that migrates deep into the Earth’s crust will pass into its supercritical domain at temperatures above 407°C and pressures above 298 bars. In the oceanic crust, these pressures are attained at depths of 3 km below sea surface, and sufficiently high temperatures are found near intruding magmas, which have temperatures in the range of 800°C to 1200°C. The physico-chemical behaviour of seawater changes dramatically when passing into the supercritical domain. A supercritical water vapour (ScriW) is formed with a density of 0.3 g/cc and a strongly reduced dipolar character. This change in polarity is causing the ScriW to lose its solubility of the common sea salts (chlorides and sulphates) and a spontaneous precipitation of sea salts takes place in the pore system. However, this is only one of many cases where the very special properties of ScriW affect its surroundings. The objective of this paper is to increase awareness of the many geological processes that are initiated and governed by ScriW. This includes interactions between ScriW and its geological surroundings to initiate and drive processes that are of major importance to the dynamics and livelihood of our planet. ScriW is the driver of volcanism associated with subduction zones, as ScriW deriving from the subduction slab is interacting with the mantle rocks and reducing their melting point. ScriW is also initiating serpentinization processes where olivines in the mantle rocks (e.g. peridotite) are transformed to serpentine minerals upon the uptake of OH-groups from hydrolysed water. The simultaneous oxidation of Fe2+ dissolved from iron-bearing pyroxenes and olivines leads to the formation of magnetite and hydrogen, and consequently, to a very reducing environment. ScriW may also be the potential starter and driver of the poorly understood mud and asphalt volcanism;both submarine and terrestrial. Furthermore, the lack of polarity of the water molecules in ScriW gives the ScriW vapour the potential to dissolve organic matter and petroleum. The same applies to supercritical brines confined in subduction slabs. If these supercritical water vapours migrate upwards to reach the critical point, the supercritical vapour is condensed into steam and dissolved petroleum is partitioned from the water phase to become a separate fluid phase. This opens up the possibility of transporting petroleum long distances when mixed with ScriW. Therefore, we may, popularly, say that ScriW drives a gigantic underground refinery system and also a salt factory. It is suggested that the result of these processes is that ScriW is rejuvenating the world’s ocean waters, as all of the ocean water circulates into the porous oceanic crust and out again in cycles of less than a million years. In summary, we suggest that ScriW participates in and is partly responsible for: 1) Ocean water rejuvenation and formation;2) Fundamental geological processes, such as volcanism, earthquakes, and meta-morphism (including serpentinization);3) Solid salt production, accumulation, transportation, and (salt) dome formation;4) The initiation and driving of mud, serpentine, and asphalt volcanoes;5) Dissolution of organic matter and petroleum, including transportation and phase separation (fractionation), when passing into the subcritical domain of (liquid) water.
文摘In this paper, we show that supercritical fluids have a greater significance in the generation of pegmatites,and for ore-forming processes related to granites than is usually assumed. We show that the supercritical melt or fluid is a silicate phase in which volatiles; principally H_2O are completely miscible in all proportions at magmatic temperatures and pressures. This phase evolves from felsic melts and changes into hydrothermal fluids, and its unique properties are particularly important in sequestering and concentrating low abundance elements, such as metals. In our past research, we have focused on processes observed at upper crustal levels, however extensive work by us and other researchers have demonstrated that supercritical melt/fluids should be abundant in melting zones at deep-crustal levels too. We propose that these fluids may provide a connecting link between lower and upper crustal magmas,and a highly efficient transport mechanism for usually melt incompatible elements. In this paper, we explore the unique features of this fluid which allow the partitioning of variouselements and compounds, potentially up to extreme levels,and may explain various features both of mineralization and the magmas that produced them.
基金the financial support from China Postdoctoral Science Foundation(2018M643205)
文摘Tea is a widely consumed beverage and has many important physiological properties and potential health benefits. In this study, a novel method based on supercritical fluid chromatography coupled with mass spectrometry (SFC-MS) was developed to simultaneously determine 11 amino acids in different types of tea (green teas, Oolong tea, black tea and Pu-erh tea). The separation conditions for the analysis of the selected amino acids including the column type, temperature and backpressure as well as the type of additive, were carefully optimized. The best separation of the 11 amino acids was obtained by adding water (5%, v/v) and trifluoroacetic acid (0.4%, v/v) to the organic modifier (methanol). Finally, the developed SFC-MS method was fully validated and successfully applied to the determination of these amino acids in six different tea samples. Good linearity (r ≥ 0.993), precision (RSDs≤ 2.99%), accuracy (91.95%-107.09%) as well as good sample stability were observed. The limits of detection ranged from 1.42 to 14.69 ng/mL, while the limits of quantification were between 4.53 and 47.0 ng/mL. The results indicate that the contents of the 11 amino acids in the six different tea samples are greatly influenced by the degree of fermentation. The proposed SFC-MS method shows a great potential for further investigation of tea varieties.
文摘We thank Tan Mingxuan et al.(2017)for their comments stimulated by our short paper in the recent Acta Geologica Sinica(English edition).We are grateful for the opportunity to expand on the model of the supercritical hyperpycnal flow deposits in the Beilaishi section on the Lingshan Island,and to explain why the model proposed by Tan Mingxuan et al.(2017)cannot explain the bulk
基金support from the National Natural Science Foundation of China(No.51576027)。
文摘The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deterioration along the circumferential direction.The governing equations of mass,momentum and energy have been solved using the pressure-based segregated solver based on the finite volume method.The re-normalization group(RNG)k-εturbulence model with an enhanced wall treatment was selected.Considering the heat conduction in the solid wall,the mechanism of heat transfer deterioration and the buoyancy effect on deteriorated heat transfer were discussed.The evolution of secondary flow was analyzed.Effects of the outer-wall heat flux,mass flux,pressure and tube thermal conductivity on heat transfer were investigated.Moreover,the buoyancy criterion and the heat transfer correlation were obtained.Results indicate that the poor flow performance of near-wall fluid causes the pseudo-film boiling,further leads to the heat transfer deterioration.The strong buoyancy has an effect of enhancing the heat transfer at the bottom of tube,and weakening the heat transfer at the top of tube,which results in the non-uniform inner-wall temperature and heat flux distributions.Decreasing the ratio of outer-wall heat flux and mass flux,increasing the pressure could weaken the heat transfer difference along the circumferential direction,while the effect of thermal conductivity of tube on the circumferential parameters distributions is more complicated.When the buoyancy criterion of(Grq/Grth)max≤0.8 is satisfied,the effect of buoyancy could be ignored.The new correlations work well for non-uniform heat transfer predictions.
基金supported financially by the Subject Chief Scientist Program(10XD14303900)from Science and Technology Commission of Shanghai Municipalitythe Specialized Research Fund for the Doctoral Program of Higher Education of China(20123107110005).
文摘The objective of this study was to improve the dissolution and bioavailability of silymarin(SM).Solid dispersions(SDs)were prepared using solution-enhanced dispersion by supercritical fluids(SEDS)and evaluated in vitro and in vivo,compared with pure SM powder.The particle sizes,stability,and contents of residual solvent of the prepared SM-SDs with SEDS and solvent evaporation(SE)were investigated.Four polymer matrix materials were evaluated for the preparation of SM-SD-SEDS,and the hydrophilic polymer,polyvinyl pyrrolidone K17,was selected with a ratio of 1:5 between SM and the polymer.Physicochemical analyses using X-ray diffraction and differential scanning calorimetry indicated that SM was dispersed in SD in an amorphous state.The optimized SM-SD-SEDS showed no loss of SM after storage for 6 months and negligible residual solvent(ethanol)was detected using gas chromatography.In vitro drug release was increased from the SM-SDSEDS,as compared with pure SM powder or SM-SD-SE.In vivo,the area under the rat plasma SM concentration-time curve and the maximum plasma SM concentration were 2.4-fold and 1.9-fold higher,respectively,after oral administration of SM-SD-SEDS as compared with an aqueous SM suspension.These results illustrated the potential of using SEDS to prepare SM-SD,further improving the biopharmaceutical properties of this compound.
