The(ultra-)mafic mine tailings pond revealed a weathering discrepancy in the tailings profile,which provided a valuable analog to assess the role of carbonate and silicate weathering of the basalt.In this study,drill-...The(ultra-)mafic mine tailings pond revealed a weathering discrepancy in the tailings profile,which provided a valuable analog to assess the role of carbonate and silicate weathering of the basalt.In this study,drill-cores samples were selected from the Wanniangou V–Ti–Fe mine tailings pond(Sichuan province,China)to investigate the mineralogicand geochemical characteristics in the tailings profile.The results reveal(1)the tailings pond profile consist of upper and lower layers.The upper layer is composed of carbonate weathering(1.4%),which was formed in the initial stages of tailings exposure and represented a minimal weathering degree.(2)The lower layer was primarily observed at the aquifer zone of the tailings pond,and was consistent with 0.45%carbonate weathering and 48.4%silicate weathering.(3)The weathering discrepancy in the tailings profile could be due to the sulfide oxidation and aerobic/flowing aquifer,which facilitate the water-tailings reactions.The tailings profile provides an analog to studying basalt weathering,as it spans both carbonate and silicate weathering.This research reinforces the idea that silicate weathering is predominant in basaltic areas and plays a crucial role in regulating atmospheric CO_(2)(carbon dioxide)levels on Earth.展开更多
The construction of waste rock dumps on existing tailing ponds has been put into practice in China to save precious land resources. This work focuses on the safety assessment of the Daheishan molybdenum mine waste roc...The construction of waste rock dumps on existing tailing ponds has been put into practice in China to save precious land resources. This work focuses on the safety assessment of the Daheishan molybdenum mine waste rock dump under construction on two adjoining tailings ponds. The consolidation of the tailings foundation and the filling quality of the waste rock are investigated by the transient electromagnetic method through detecting water-rich areas and loose packing areas, from which, the depth of phreatic line is also estimated. With such information and the material parameters, the numerical method based on shear strength reduction is applied to analyzing the overall stability of the waste rock dump and the tailings ponds over a number of typical cross sections under both current and designed conditions, where the complex geological profiles exposed by site investigation are considered. Through numerical experiments, the influence of soft lenses in the tailings and possible loose packing areas in the waste rock is examined. Although large displacements may develop due to the soft tailings foundation, the results show that the waste rock dump satisfies the safety requirements under both present and designed conditions.展开更多
AMD(Acid Mine Drainage)-type acidic groundwater (pH<4) from oxidizing sulfide tailings in BS nickel mine (Western Australia) is of higher total rare earth element(REE) contents and Ce enrichment (PAAS normalization...AMD(Acid Mine Drainage)-type acidic groundwater (pH<4) from oxidizing sulfide tailings in BS nickel mine (Western Australia) is of higher total rare earth element(REE) contents and Ce enrichment (PAAS normalization), different from setting groundwater (pH>6.5, with lower total REE contents, Ce depletion). While the AMD contaminated groundwater (pH=4.0-6.5) around tailings pond is characterized by transition from acidic to setting groundwater in total REE content, and associated with Ce depletion (like setting groundwater). The light REE in all type groundwater shows up depletion, but its depleted extent in acidic groundwater is more remarkable. This work indicates that REE behavior in AMD-type acidic groundwater is controlled mainly by pH value and metal (Al, Mn and Fe) contents. And the critical pH value that affects REE behavior in ground acidic water would be 4, lower than the previous value (pH=5) that has been believed prevalently in surface acidic waters. The pH could affect REE behavior in groundwater by controlling the solubility of metal (Al, Mn and Fe) hydroxides and the valence of cerium. Finally, light REE depletion in acidic groundwater may due to element affinity. High content Al (affinity with heavy REE) and low content Fe (affinity with light REE) may lead to heavy REE enrichment while light REE relative depletion in water.展开更多
The purpose of this study was to evaluate the effects of retention ponds on the environment and population health by analyzing water samples from various ponds in Mogadishu, to determine the prevalence of waterborne i...The purpose of this study was to evaluate the effects of retention ponds on the environment and population health by analyzing water samples from various ponds in Mogadishu, to determine the prevalence of waterborne illnesses that occur during the rainy season in Mogadishu, and to find out what experts thought about the effects of retention ponds on the environment as well as population health in Mogadishu. Methods: Mixed designs were used in the study. The first design is an exploratory study where samples are taken from different retention ponds in Mogadishu. The second design involves gathering secondary data from the online FSNAU Dashboard regarding the incidence of rainfall and waterborne illnesses including malaria and cholera. Additionally, a cross-sectional survey of expert opinions using questionnaires was the third design. The 10 water samples were taken from retention ponds in Mogadishu as part of the sample size. Data on the fourth month was also gathered using the FNSAU dashboard, and seventy sample sizes were used for the expert self-administered questionnaire for the third design. Excel was used for data analysis in the initial design. While BMI SPSS versions 22 were used to analyze the data from the Self-administered Questionnaire, additional methods were utilized to compute descriptive statistics, such as mean and standard deviation, and to analyze demographic data in a frequency table. Findings: The results show that three samples had unsatisfactory scores (Grade D): Yaqshid (Warshadda Bastada) had a WQI of 80.85, Boondheer (Bondher Pond) had a WQI of 80.64, and Wartanabad (Xamar Jadiid Pond) had a WQI of 80.89. The remaining samples were all rated as fair (grade), which indicates that they ranged from 50 to 75. The months with the largest rainfall already occurred in December, November, and October, when the prevalence of diseases during the rainy season was highest for cholera cases. Although October and December saw a significant number of malaria cases, November did not. Retention ponds’ overall effects on residential environments were evaluated, and the results showed that the standard deviation was 0.802 and the cumulative average mean scores were 4.41 overall. This indicates that the respondents were in agreement that retention ponds in Mogadishu, Somalia, had an effect on residential areas. Recommendation: The study suggested that in order to identify retention pond contamination and create treatment units for its management, the Ministry of Health forms a district-level public health committee. All districts must have a sewer system installed by the local government, and retention ponds must be made easier in order to move waste outside of the city.展开更多
The trace elements chemistry of Bartlett Pond, a small shallow wetland pond in Laredo, Southern Texas, was sampled to evaluate the dynamics of trace elements impacts on water quality and ecosystems ecology of the pond...The trace elements chemistry of Bartlett Pond, a small shallow wetland pond in Laredo, Southern Texas, was sampled to evaluate the dynamics of trace elements impacts on water quality and ecosystems ecology of the pond. Two types of fish (bass and tilapia) were also sampled to see the trace element accumulation in different parts of their body. The concentrations of trace elements in water samples were found in the following order: Fe ≫Sb > Pb > As ≫Co > Tl > Cr > Cd within Bartlett Pond. Overall, the water quality of the pond is unacceptable for drinking and any other purposes as trace element concentrations (e.g. As, Cd, Co, Cr, Pb, Fe, Sb and Tl) are exceedingly higher (several fold) than the WHO and US EPA guidelines. Predictive and correlation analysis shows that most trace elements exhibit a strong positive correlation among them indicating the same anthropogenic sources and biogeochemical processes regulate these trace elements within the pond. Distributions of the trace elements in water exhibit different shapes mostly as positively skewed distribution for As, Cd, Co, Cr, and Tl, symmetrical distribution for Fe and almost symmetrical distribution for Pb and Sb. Concentrations of As, Co and Tl accumulated much higher in different parts of the Bass than Tilapia fish. The concentrations of As, Tl, Co, and Sb appeared significantly higher in different parts of the body of both Bass and Tilapia than the maximum SRM certified values. Accumulation of these contaminants in fish tissues pose increased health risks to humans who consume these contaminated fish although fishing is prohibited. Anthropogenic activities in the region primarily degrade the whole pond ecosystem ecology of the Bartlett Pond and waters of this pond to be not recommended for any use. These findings may be useful for the scientific community and concerned authorities to improve understanding about these precious natural resources and conservation of the ecosystem ecology.展开更多
Pampanga is the top tilapia-producing province in Philippines. One of its municipalities, Minalin, is considered as one of its major centers of production. This study aims to determine the impacts of climate change ha...Pampanga is the top tilapia-producing province in Philippines. One of its municipalities, Minalin, is considered as one of its major centers of production. This study aims to determine the impacts of climate change hazards on the economic performance of tilapia-intensive pond culture in Minalin, Pampanga considering the threats to the industry, livelihoods, and food security. Results revealed that the economic performance of tilapia pond operations using semi-intensive large-scale culture was affected by climate change, as reflected in the reduction of yield among tilapia pond operators. This makes intensive tilapia pond farming in Minalin still a viable venture but will now require more than a year to pay for investment (variable and fixed) costs if under climate change risks. The study recommends strengthening capacity building related to climate-smart tilapia farming technologies for pond operators and to implement appropriate technologies to address climate change risks.展开更多
An experimental program was conducted to determine the dynamic properties of pond ash(PA)and pond ash mixed with admixtures like crumb rubber(CR)and coir fiber(CF)which are wastes of different industries.Additives CR ...An experimental program was conducted to determine the dynamic properties of pond ash(PA)and pond ash mixed with admixtures like crumb rubber(CR)and coir fiber(CF)which are wastes of different industries.Additives CR and CF were mixed separately with pond ash in a percentage ranging from 0%–20%at an interval of 5%and 0%–2%at an interval of 0.5%by weight of pond ash,respectively.Dynamic properties(Shear modulus,Number of cycles to initiate liquefaction,Degradation index and Damping ratio)for pond ash mixes were determined using strain-controlled cyclic tri-axial apparatus.The shear strain was kept constant at 1.2%and the frequency varied from 0.4 to 1 Hz.Liquefaction resistance improves when crumb rubber is added to pond ash,however adding Coir fiber to pond ash has essentially no effect on the number of cycles required to initiate liquefaction.The dynamic shear modulus decreases when crumb rubber was mixed in pond ash whereas when coir fiber is added to pond ash,the dynamic shear modulus increases significantly.A mix of PA,CR,and CF was also tried to balance the number of cycles required to initiate liquefaction and shear modulus.The mixed sample in the proportion of PA(84%)+CR(15)+CF(1%)can be termed a balanced mix as the number of cycles to initiate liquefaction was more than all PA-CF mixes and also the shear modulus was more than all PA-CR mixes.Damping ratio increases with increasing frequency of loading(0.4 to 1 Hz).展开更多
Photocatalytic processes are efficient methods to solve water contamination problems,especially considering dyeing wastewater disposal.However,high-efficiency photocatalysts are usually very expensive and have the ris...Photocatalytic processes are efficient methods to solve water contamination problems,especially considering dyeing wastewater disposal.However,high-efficiency photocatalysts are usually very expensive and have the risk of heavy metal pollution.Recently,an iron oxides@hydrothermal carbonation carbon(HTCC)heterogeneous catalyst was prepared by our group through co-hydrothermal treatment of carbohydrates and zinc extraction tailings of converter dust.Herein,the catalytic performance of the iron oxides@HTCC was verified by a nonbiodegradable dye,methylene blue(MB),and the catalytic mechanism was deduced from theoretical simulations and spectroscopic measurements.The iron oxides@HTCC showed an excellent synergy between photocatalysis and Fenton-like reactions.Under visible-light illumination,the iron oxides@HTCC could be excited to generate electrons and holes,reacting with H_(2)O_(2)to produce·OH radicals to oxidize and decompose organic pollutants.The removal efficiency of methylene blue over iron oxides@HTCC at 140 min was 2.86 times that of HTCC.The enhanced catalytic performance was attributed to the advantages of iron oxides modification:(1)promoting the excitation induced by photons;(2)improving the charge transfer.Furthermore,the iron oxides@HTCC showed high catalytic activity in a wide pH value range of 2.3-10.4,and the MB removal efficiency remained higher than 95% after the iron oxides@HTCC was recycled 4 times.The magnetically recyclable iron oxides@HTCC may provide a solution for the treatment of wastewater from the textile industry.展开更多
Pipeline hydraulic transport is a highly efficient and low energy-consumption method for transporting solids and is commonly used for tailing slurry transport in the mining industry.Erosion wear(EW)remains the main ca...Pipeline hydraulic transport is a highly efficient and low energy-consumption method for transporting solids and is commonly used for tailing slurry transport in the mining industry.Erosion wear(EW)remains the main cause of failure in tailings slurry pipeline systems,particularly at bends.EW is a complex phenomenon influenced by numerous factors,but research in this area has been limited.This study performs numerical simulations of slurry transport at the bend by combining computational fluid dynamics and fluid particle tracking using a wear model.Based on the validation of the feasibility of the model,this work focuses on the effects of coupled inlet velocity(IV)ranging from 1.5 to 3.0 m·s^(-1),particle size(PS)ranging from 50 to 650μm,and bend angle(BA)ranging from 45°to 90°on EW at the bend in terms of particle kinetic energy and incidence angle.The results show that the maximum EW rate of the slurry at the bend increases exponentially with IV and PS and first increases and then decreases with the increase in BA with the inflection point at 60°within these parameter ranges.Further comprehensive analysis reveals that the sensitivity level of the three factors to the maximum EW rate is PS>IV>BA,and when IV is 3.0 m/s,PS is 650μm,and BA is 60°,the bend EW is the most severe,and the maximum EW rate is 5.68×10^(-6)kg·m^(-2)·s^(-1).In addition,When PS is below or equal to 450μm,the maximum EW position is mainly at the outlet of the bend.When PS is greater than 450μm,the maximum EW position shifts toward the center of the bend with the increase in BA.Therefore,EW at the bend can be reduced in practice by reducing IV as much as possible and using small particles.展开更多
Estimation of stressses within the tailings slurry during self-weight consolidation is a critical issue for cost-effective barricade design and efficient backfill planning in underground mine stopes.This process requi...Estimation of stressses within the tailings slurry during self-weight consolidation is a critical issue for cost-effective barricade design and efficient backfill planning in underground mine stopes.This process requires a good understanding of self-weight consolidation behaviors of the tailings slurry within practical stopes,where many factors can have significant effects on the consolidation,including drainage condition and cement addition.In this paper,the prepared tailings slurry with different cement contents(0,4.76wt%,and 6.25wt%)was poured into1.2 m-high columns,which allowed three drainage scenarios(undrained,partial lateral drainage near the bottom part,and full lateral drainage boundaries)to investigate the effects of drainage condition and cement addition on the consolidation behavior of the tailings slurry.The consolidation behavior was analyzed in terms of pore water pressure(PWP),settlement,volume of drainage water,and residual water content.The results indicate that increasing the length of the drainage boundary or cement content aids in PWP dissipation.In addition,constructing an efficient drainage boundary was more favorable to PWP dissipation than increasing cement addition.The final stable PWP on the column floor was not sensitive to cement addition.The final settlement of uncemented tailings slurry was independent of drainage conditions,and that of cemented tailings slurry decreased with the increase in cement addition.Notably,more pore water can drain out from the cemented tailings slurry than the uncemented tailings slurry during consolidation.展开更多
The use of some environmental functional minerals as backfill-modified materials may improve the leaching resistance of cemented uranium tailings backfill created from alkali-activated slag(CUTB),but these materials m...The use of some environmental functional minerals as backfill-modified materials may improve the leaching resistance of cemented uranium tailings backfill created from alkali-activated slag(CUTB),but these materials may participate in the hydration reaction of the cementitious materials,which could have a certain impact on the pore structure of the CUTB,thus affecting its mechanical properties and leaching resistance.In this paper,natural zeolite is selected as the backfill-modified material,and it is added to alkali-activated slag paste(AASP)and CUTB in cementitious material proportions of 4%,8%,12%,and 16%to prepare AASP mixtures and CUTB mixtures containing environmental functional minerals.After the addition of natural zeolite,the porosity of the CUTB generally increases,but when the content is 4%,the porosity decreases to 22.30%.The uniaxial compressive strength(UCS)of the CUTB generally decreases,but the decrease is the smallest when the content is 4%,and the UCS is 12.37 MPa.The addition of natural zeolite mainly reduces the number of fine pores in the CUTB,but the pores with relaxation times T_(2)of greater than 10 ms account for about 10%of the total pores,and there are a certain number of large pores in the CUTB.The main product of alkali-activated slag is calcium(alumino)silicate hydrate(C-(A)-S-H gel).When natural zeolite is added,the hydration products develop towards denser products with a high degree of polymerization and the formation of low polymerization products is reduced.This affects the internal fracture pores of the hydration products and the interface pores of the CUTB,has an irregular effect on the pore characteristics of the CUTB,and influences the UCS.展开更多
Limited by mining technology,mineral exploitation can produce large amounts of tailings.Heavy summer rainfall or seasonal freeze-thaw can lead to physical and chemical modification of tailing material in mountainous a...Limited by mining technology,mineral exploitation can produce large amounts of tailings.Heavy summer rainfall or seasonal freeze-thaw can lead to physical and chemical modification of tailing material in mountainous areas,resulting in fluidized tailings flow and severe disaster losses.Therefore,aiming at the problem of tailings fluidization catastrophe,this paper tried to reveal the rheological mechanism of tailings fluidization transformation by combining rheological tests and theoretical analysis.The results show that the yield stress increases with decreasing temperature,and when the density of debris flow(ρ)is more than 1.9 g/cm~3,this behavior becomes more pronounced as the density increases.The storage modulus decreases by at least two orders of magnitude at the solid-fluid transition under amplitude test sweep.Storage and loss modulus in the linear viscoelastic range and yield stress have an exponential growth relationship with sediment concentration.In addition,a stress constitutive relation and a new exponential law describing the evolution of yield stress required for solid-liquid transformation were proposed,and the relationship is further strengthened through a comprehensive analysis of existing results,which expands the evaluation application of the rheological characteristics of tailings flow.This paper provides a new insight into the rheological properties of tailing and how they occur through solid-liquid transition under different environments,which is beneficial to geological hazard prevention and the ecological remediation of the mining area.展开更多
To develop the microwave absorbing(MA)properties of cementitious material mixed with mine solid waste,the iron tailings cementitious microwave absorbing materials were prepared.The iron tailings was treated into diffe...To develop the microwave absorbing(MA)properties of cementitious material mixed with mine solid waste,the iron tailings cementitious microwave absorbing materials were prepared.The iron tailings was treated into different particle sizes by planetary ball mill,and the physicochemical properties of iron tailings were tested by laser particle size analyzer and scanning electron microscope(SEM).The electromagnetic parameters of iron tailings cementitious materials were characterized by a vector network analyzer and simulated MA properties,and the MA properties of iron tailings-cement composite system with steel fiber as absorber was studied.Based on the design of the single-layer structure,optimum mix ratio and thickness configuration method of double-layer structure were further studied,meanwhile,the mechanical properties and engineering application were analyzed and discussed.The results show that the particle size of iron tailings can afiect its electromagnetic behavior in cementitious materials,and the smaller particles lead the increase of demagnetisation efiect induced by domain wall motion and achieve better microwave absorbing properties in cementitious materials.When the thickness of matching layer and absorbing layer is 5 mm,the optimized microwave absorbing properties of C1/C3 double-layer cementitious material can obtain optimal RL value of-27.61 dB and efiective absorbing bandwidth of 0.97 GHz,which attributes to the synergistic efiect of impedance matching and attenuation characteristics.The double-layer microwave absorbing materials obtain excellent absorbing properties and show great design flexibility and diversity,which can be used as a suitable candidate for the preparation of favorable microwave absorbing cementitious materials.展开更多
Primary productivity in the Antarctic aquatic environment with simple ecosystems is sensitive to climate and environmental fluctuations.We investigatedδ13C values for n-alkanoic acids derived from phototrophic organi...Primary productivity in the Antarctic aquatic environment with simple ecosystems is sensitive to climate and environmental fluctuations.We investigatedδ13C values for n-alkanoic acids derived from phototrophic organisms in a lacustrine sediment core(IIL3)to indicate primary productivity in ponds on Inexpressible Island in the western Ross Sea,Antarctica.Short-chain n-alkanoic acids(C14–C18)were abundant in the IIL3 sediment profile.The carbon isotope ratios of short-chain n-alkanoic acids in the sediment samples and floating microbial mats were similar,indicating that the short-chain n-alkanoic acids in the IIL3 sediment profile predominantly originated from phototrophic organisms.Theδ13C values for the short-chain n-alkanoic acids varied widely through the sediment profile,and 13C-enrichment of n-alkanoic acids was most likely related to high productivity due to carbon-limited conditions caused by enhanced photosynthetic efficiency.Theδ13C values for the n-alkanoic acids changed over the past 3200 years in similar ways to organic proxies for aquatic productivity(n-alkanoic acid and sterol sedimentary fluxes).C16 n-alkanoic acid was enriched in 13C in periods of high aquatic productivity~750–1650 and 3000–3200 a BP but depleted in 13C in periods of relatively low productivity~150–600 and 2500–3000 a BP.The results indicated that carbon isotope ratios of lipids from phototrophic organisms could be used as new proxies to reconstruct paleo-productivity in Antarctic lakes and ponds and therefore improve our understanding of past climate changes.展开更多
The disposal of mining tailings has increasingly focused on the use of dry stacks.These structures offer more security since they use filtered and compacted material.Because of the construction method and the heights ...The disposal of mining tailings has increasingly focused on the use of dry stacks.These structures offer more security since they use filtered and compacted material.Because of the construction method and the heights achieved,the material that compounds the structure can be subjected to different stress paths along the failure plane.The theoretical framework considered in the design of these structures generally is the critical state soil mechanics(CSSM).However,the data in the literature concerning the uniqueness of critical state line(CSL)is still controversial as the soil is subjected to different stress paths.With respect to tailings,this question is even more restricted.This paper studies two tailings with different gradings due to the beneficial processes over extension and compression paths.A series of drained and undrained triaxial tests was conducted over a range of initial densities and stress levels.In the q-p'plane,different critical stress ratio(M)values were obtained for compression and extension stress paths.However,the critical state friction angle is very similar with a slightly higher critical state friction angle for extension tests.Curved stress path dependent CSLs were obtained in the n-lnp0 plane with the extension tests below the CSL defined in compression.Regarding the fines content,the studied tailings presented very similar M and critical state friction angle values.However,the fines content af-fects the volumetric behavior of the studied tailings and the CSLs on the n-lnp0 plane shift downwards with the increasing fines content for compression and extension tests.In relation to dilatancy analysis,the fines content did not present an evident influence on the dilatancy of the materials.However,different values of mean stress ratio N were obtained between compression and extension tests and can corroborate the existence of non-unique CSLs for these materials.展开更多
Low-cost thermal insulation porous ceramics with uniform pore diameter and low bulk density were prepared with soda-ash dregs and felsic tailings.We investigated the effect of temperature,foaming agent,fluxing agent,A...Low-cost thermal insulation porous ceramics with uniform pore diameter and low bulk density were prepared with soda-ash dregs and felsic tailings.We investigated the effect of temperature,foaming agent,fluxing agent,Al_(2)O_(3)and CaO content on the pore structure and crystal phase of porous ceramics.The effect of Ca^(2+)in soda-ash dregs on the preparation of quartz-feldspar based porous ceramics was studied.The results showed that the contribution of Ca^(2+)to the preparation of porous ceramics in this system was mainly to accelerate the Si-O bond fracture and reduce the sintering temperature at the initial stage of sintering,which destroyed the needle-like feldspar in the high temperature melt and reduced the melt viscosity,thus reduced the foaming resistance and promoted the porous products with uniform pore size distribution.The Ca^(2+)content on the high side can participate in the formation of crystals in sintering.The generated needle-like diopside and augite,which have small length-diameter ratio,will negligibly change in the viscosity of melt at high temperatures,and their inhibition effect on pores is not as good as that of feldspar with large length-diameter ratio,resulting in the merger and collapse of pores.But the increase of diopside and augite can improve the compressive strength of porous products to some extent.Porous ceramic products containing needle-like feldspar phase can be prepared by using two kinds of solid waste,which can improve the compressive strength of the products and reduce the raw material cost and energy consumption while comprehensively utilizing the double solid waste.The optimal product has a bulk density of 0.45 g/cm^(3),a compressive strength of 3.17 MPa,and a thermal conductivity of 0.11 W/(m·K).展开更多
This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the...This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the characterization of the tailings before and after calcination, chemical, mineralogical, thermogravimetric, and mechanical strength analyses were conducted. The results were compared with those for commonly used pozzolans, metakaolin, and similarities were identified. The study of the morphology of the particles before and after calcination was conducted through analyses of images obtained by scanning electronic microscope. The pozzolanic activity of the fine mining tailings calcined with flash technology was evaluated in uniaxial compression trials, which showed excellent results.展开更多
In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points ...In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points and monitoring factors in thegraphic on the same factor axis can clearly express the intrinsic link between pollutantsand monitoring points and distribution characteristics.To determine the main monitoringpoint and the main monitoring indicators can reduce and optimize the number of monitoringpoints under the premise of ensuring the typical and representative of monitoring data.Using the correlation of pollutants can reduce the number of monitoring indicators and improvethe effectiveness of data collection.展开更多
基金financially supported by Sichuan Science and Technology Program(No.2023YFS0408)。
文摘The(ultra-)mafic mine tailings pond revealed a weathering discrepancy in the tailings profile,which provided a valuable analog to assess the role of carbonate and silicate weathering of the basalt.In this study,drill-cores samples were selected from the Wanniangou V–Ti–Fe mine tailings pond(Sichuan province,China)to investigate the mineralogicand geochemical characteristics in the tailings profile.The results reveal(1)the tailings pond profile consist of upper and lower layers.The upper layer is composed of carbonate weathering(1.4%),which was formed in the initial stages of tailings exposure and represented a minimal weathering degree.(2)The lower layer was primarily observed at the aquifer zone of the tailings pond,and was consistent with 0.45%carbonate weathering and 48.4%silicate weathering.(3)The weathering discrepancy in the tailings profile could be due to the sulfide oxidation and aerobic/flowing aquifer,which facilitate the water-tailings reactions.The tailings profile provides an analog to studying basalt weathering,as it spans both carbonate and silicate weathering.This research reinforces the idea that silicate weathering is predominant in basaltic areas and plays a crucial role in regulating atmospheric CO_(2)(carbon dioxide)levels on Earth.
基金Projects(51209118,71373245)supported by the National Natural Science Foundation of ChinaProject(2014JBKY01)supported by the Fundamental Research Funds for CASST,China
文摘The construction of waste rock dumps on existing tailing ponds has been put into practice in China to save precious land resources. This work focuses on the safety assessment of the Daheishan molybdenum mine waste rock dump under construction on two adjoining tailings ponds. The consolidation of the tailings foundation and the filling quality of the waste rock are investigated by the transient electromagnetic method through detecting water-rich areas and loose packing areas, from which, the depth of phreatic line is also estimated. With such information and the material parameters, the numerical method based on shear strength reduction is applied to analyzing the overall stability of the waste rock dump and the tailings ponds over a number of typical cross sections under both current and designed conditions, where the complex geological profiles exposed by site investigation are considered. Through numerical experiments, the influence of soft lenses in the tailings and possible loose packing areas in the waste rock is examined. Although large displacements may develop due to the soft tailings foundation, the results show that the waste rock dump satisfies the safety requirements under both present and designed conditions.
基金Project supported by the Science Foundation of Guangxi Province, ChinaProject supported by the Director Fund Project of Key Laboratory of Geological Engineering Center of Guangxi Province, China
文摘AMD(Acid Mine Drainage)-type acidic groundwater (pH<4) from oxidizing sulfide tailings in BS nickel mine (Western Australia) is of higher total rare earth element(REE) contents and Ce enrichment (PAAS normalization), different from setting groundwater (pH>6.5, with lower total REE contents, Ce depletion). While the AMD contaminated groundwater (pH=4.0-6.5) around tailings pond is characterized by transition from acidic to setting groundwater in total REE content, and associated with Ce depletion (like setting groundwater). The light REE in all type groundwater shows up depletion, but its depleted extent in acidic groundwater is more remarkable. This work indicates that REE behavior in AMD-type acidic groundwater is controlled mainly by pH value and metal (Al, Mn and Fe) contents. And the critical pH value that affects REE behavior in ground acidic water would be 4, lower than the previous value (pH=5) that has been believed prevalently in surface acidic waters. The pH could affect REE behavior in groundwater by controlling the solubility of metal (Al, Mn and Fe) hydroxides and the valence of cerium. Finally, light REE depletion in acidic groundwater may due to element affinity. High content Al (affinity with heavy REE) and low content Fe (affinity with light REE) may lead to heavy REE enrichment while light REE relative depletion in water.
文摘The purpose of this study was to evaluate the effects of retention ponds on the environment and population health by analyzing water samples from various ponds in Mogadishu, to determine the prevalence of waterborne illnesses that occur during the rainy season in Mogadishu, and to find out what experts thought about the effects of retention ponds on the environment as well as population health in Mogadishu. Methods: Mixed designs were used in the study. The first design is an exploratory study where samples are taken from different retention ponds in Mogadishu. The second design involves gathering secondary data from the online FSNAU Dashboard regarding the incidence of rainfall and waterborne illnesses including malaria and cholera. Additionally, a cross-sectional survey of expert opinions using questionnaires was the third design. The 10 water samples were taken from retention ponds in Mogadishu as part of the sample size. Data on the fourth month was also gathered using the FNSAU dashboard, and seventy sample sizes were used for the expert self-administered questionnaire for the third design. Excel was used for data analysis in the initial design. While BMI SPSS versions 22 were used to analyze the data from the Self-administered Questionnaire, additional methods were utilized to compute descriptive statistics, such as mean and standard deviation, and to analyze demographic data in a frequency table. Findings: The results show that three samples had unsatisfactory scores (Grade D): Yaqshid (Warshadda Bastada) had a WQI of 80.85, Boondheer (Bondher Pond) had a WQI of 80.64, and Wartanabad (Xamar Jadiid Pond) had a WQI of 80.89. The remaining samples were all rated as fair (grade), which indicates that they ranged from 50 to 75. The months with the largest rainfall already occurred in December, November, and October, when the prevalence of diseases during the rainy season was highest for cholera cases. Although October and December saw a significant number of malaria cases, November did not. Retention ponds’ overall effects on residential environments were evaluated, and the results showed that the standard deviation was 0.802 and the cumulative average mean scores were 4.41 overall. This indicates that the respondents were in agreement that retention ponds in Mogadishu, Somalia, had an effect on residential areas. Recommendation: The study suggested that in order to identify retention pond contamination and create treatment units for its management, the Ministry of Health forms a district-level public health committee. All districts must have a sewer system installed by the local government, and retention ponds must be made easier in order to move waste outside of the city.
文摘The trace elements chemistry of Bartlett Pond, a small shallow wetland pond in Laredo, Southern Texas, was sampled to evaluate the dynamics of trace elements impacts on water quality and ecosystems ecology of the pond. Two types of fish (bass and tilapia) were also sampled to see the trace element accumulation in different parts of their body. The concentrations of trace elements in water samples were found in the following order: Fe ≫Sb > Pb > As ≫Co > Tl > Cr > Cd within Bartlett Pond. Overall, the water quality of the pond is unacceptable for drinking and any other purposes as trace element concentrations (e.g. As, Cd, Co, Cr, Pb, Fe, Sb and Tl) are exceedingly higher (several fold) than the WHO and US EPA guidelines. Predictive and correlation analysis shows that most trace elements exhibit a strong positive correlation among them indicating the same anthropogenic sources and biogeochemical processes regulate these trace elements within the pond. Distributions of the trace elements in water exhibit different shapes mostly as positively skewed distribution for As, Cd, Co, Cr, and Tl, symmetrical distribution for Fe and almost symmetrical distribution for Pb and Sb. Concentrations of As, Co and Tl accumulated much higher in different parts of the Bass than Tilapia fish. The concentrations of As, Tl, Co, and Sb appeared significantly higher in different parts of the body of both Bass and Tilapia than the maximum SRM certified values. Accumulation of these contaminants in fish tissues pose increased health risks to humans who consume these contaminated fish although fishing is prohibited. Anthropogenic activities in the region primarily degrade the whole pond ecosystem ecology of the Bartlett Pond and waters of this pond to be not recommended for any use. These findings may be useful for the scientific community and concerned authorities to improve understanding about these precious natural resources and conservation of the ecosystem ecology.
文摘Pampanga is the top tilapia-producing province in Philippines. One of its municipalities, Minalin, is considered as one of its major centers of production. This study aims to determine the impacts of climate change hazards on the economic performance of tilapia-intensive pond culture in Minalin, Pampanga considering the threats to the industry, livelihoods, and food security. Results revealed that the economic performance of tilapia pond operations using semi-intensive large-scale culture was affected by climate change, as reflected in the reduction of yield among tilapia pond operators. This makes intensive tilapia pond farming in Minalin still a viable venture but will now require more than a year to pay for investment (variable and fixed) costs if under climate change risks. The study recommends strengthening capacity building related to climate-smart tilapia farming technologies for pond operators and to implement appropriate technologies to address climate change risks.
文摘An experimental program was conducted to determine the dynamic properties of pond ash(PA)and pond ash mixed with admixtures like crumb rubber(CR)and coir fiber(CF)which are wastes of different industries.Additives CR and CF were mixed separately with pond ash in a percentage ranging from 0%–20%at an interval of 5%and 0%–2%at an interval of 0.5%by weight of pond ash,respectively.Dynamic properties(Shear modulus,Number of cycles to initiate liquefaction,Degradation index and Damping ratio)for pond ash mixes were determined using strain-controlled cyclic tri-axial apparatus.The shear strain was kept constant at 1.2%and the frequency varied from 0.4 to 1 Hz.Liquefaction resistance improves when crumb rubber is added to pond ash,however adding Coir fiber to pond ash has essentially no effect on the number of cycles required to initiate liquefaction.The dynamic shear modulus decreases when crumb rubber was mixed in pond ash whereas when coir fiber is added to pond ash,the dynamic shear modulus increases significantly.A mix of PA,CR,and CF was also tried to balance the number of cycles required to initiate liquefaction and shear modulus.The mixed sample in the proportion of PA(84%)+CR(15)+CF(1%)can be termed a balanced mix as the number of cycles to initiate liquefaction was more than all PA-CF mixes and also the shear modulus was more than all PA-CR mixes.Damping ratio increases with increasing frequency of loading(0.4 to 1 Hz).
基金financially supported by the National Natural Science Foundation of China(No.52074035)the Fundamental Research Funds for the Central Universities,China(No.00007720)the National Key Research and Development Program of China(No.2020YFC1910000)。
文摘Photocatalytic processes are efficient methods to solve water contamination problems,especially considering dyeing wastewater disposal.However,high-efficiency photocatalysts are usually very expensive and have the risk of heavy metal pollution.Recently,an iron oxides@hydrothermal carbonation carbon(HTCC)heterogeneous catalyst was prepared by our group through co-hydrothermal treatment of carbohydrates and zinc extraction tailings of converter dust.Herein,the catalytic performance of the iron oxides@HTCC was verified by a nonbiodegradable dye,methylene blue(MB),and the catalytic mechanism was deduced from theoretical simulations and spectroscopic measurements.The iron oxides@HTCC showed an excellent synergy between photocatalysis and Fenton-like reactions.Under visible-light illumination,the iron oxides@HTCC could be excited to generate electrons and holes,reacting with H_(2)O_(2)to produce·OH radicals to oxidize and decompose organic pollutants.The removal efficiency of methylene blue over iron oxides@HTCC at 140 min was 2.86 times that of HTCC.The enhanced catalytic performance was attributed to the advantages of iron oxides modification:(1)promoting the excitation induced by photons;(2)improving the charge transfer.Furthermore,the iron oxides@HTCC showed high catalytic activity in a wide pH value range of 2.3-10.4,and the MB removal efficiency remained higher than 95% after the iron oxides@HTCC was recycled 4 times.The magnetically recyclable iron oxides@HTCC may provide a solution for the treatment of wastewater from the textile industry.
基金financially supported by the National Natural Science Foundation of China (Nos.52104156,52074351 and 52004330)the Science and Technology Innovation Program of Hunan Province,China (No.2021RC3125).
文摘Pipeline hydraulic transport is a highly efficient and low energy-consumption method for transporting solids and is commonly used for tailing slurry transport in the mining industry.Erosion wear(EW)remains the main cause of failure in tailings slurry pipeline systems,particularly at bends.EW is a complex phenomenon influenced by numerous factors,but research in this area has been limited.This study performs numerical simulations of slurry transport at the bend by combining computational fluid dynamics and fluid particle tracking using a wear model.Based on the validation of the feasibility of the model,this work focuses on the effects of coupled inlet velocity(IV)ranging from 1.5 to 3.0 m·s^(-1),particle size(PS)ranging from 50 to 650μm,and bend angle(BA)ranging from 45°to 90°on EW at the bend in terms of particle kinetic energy and incidence angle.The results show that the maximum EW rate of the slurry at the bend increases exponentially with IV and PS and first increases and then decreases with the increase in BA with the inflection point at 60°within these parameter ranges.Further comprehensive analysis reveals that the sensitivity level of the three factors to the maximum EW rate is PS>IV>BA,and when IV is 3.0 m/s,PS is 650μm,and BA is 60°,the bend EW is the most severe,and the maximum EW rate is 5.68×10^(-6)kg·m^(-2)·s^(-1).In addition,When PS is below or equal to 450μm,the maximum EW position is mainly at the outlet of the bend.When PS is greater than 450μm,the maximum EW position shifts toward the center of the bend with the increase in BA.Therefore,EW at the bend can be reduced in practice by reducing IV as much as possible and using small particles.
基金financially supported by the Young Scientist Project of the National Key Research and Development Program of China (No.2021YFC2900600)the Beijing Nova Program (No.20220484057)financial support from China Scholarship Council under Grant CSC No.202110300001。
文摘Estimation of stressses within the tailings slurry during self-weight consolidation is a critical issue for cost-effective barricade design and efficient backfill planning in underground mine stopes.This process requires a good understanding of self-weight consolidation behaviors of the tailings slurry within practical stopes,where many factors can have significant effects on the consolidation,including drainage condition and cement addition.In this paper,the prepared tailings slurry with different cement contents(0,4.76wt%,and 6.25wt%)was poured into1.2 m-high columns,which allowed three drainage scenarios(undrained,partial lateral drainage near the bottom part,and full lateral drainage boundaries)to investigate the effects of drainage condition and cement addition on the consolidation behavior of the tailings slurry.The consolidation behavior was analyzed in terms of pore water pressure(PWP),settlement,volume of drainage water,and residual water content.The results indicate that increasing the length of the drainage boundary or cement content aids in PWP dissipation.In addition,constructing an efficient drainage boundary was more favorable to PWP dissipation than increasing cement addition.The final stable PWP on the column floor was not sensitive to cement addition.The final settlement of uncemented tailings slurry was independent of drainage conditions,and that of cemented tailings slurry decreased with the increase in cement addition.Notably,more pore water can drain out from the cemented tailings slurry than the uncemented tailings slurry during consolidation.
基金funded by the National Natural Science Foundation of China(No.51904154)Natural Science Foundation of Hunan Province(No.2020JJ5491).
文摘The use of some environmental functional minerals as backfill-modified materials may improve the leaching resistance of cemented uranium tailings backfill created from alkali-activated slag(CUTB),but these materials may participate in the hydration reaction of the cementitious materials,which could have a certain impact on the pore structure of the CUTB,thus affecting its mechanical properties and leaching resistance.In this paper,natural zeolite is selected as the backfill-modified material,and it is added to alkali-activated slag paste(AASP)and CUTB in cementitious material proportions of 4%,8%,12%,and 16%to prepare AASP mixtures and CUTB mixtures containing environmental functional minerals.After the addition of natural zeolite,the porosity of the CUTB generally increases,but when the content is 4%,the porosity decreases to 22.30%.The uniaxial compressive strength(UCS)of the CUTB generally decreases,but the decrease is the smallest when the content is 4%,and the UCS is 12.37 MPa.The addition of natural zeolite mainly reduces the number of fine pores in the CUTB,but the pores with relaxation times T_(2)of greater than 10 ms account for about 10%of the total pores,and there are a certain number of large pores in the CUTB.The main product of alkali-activated slag is calcium(alumino)silicate hydrate(C-(A)-S-H gel).When natural zeolite is added,the hydration products develop towards denser products with a high degree of polymerization and the formation of low polymerization products is reduced.This affects the internal fracture pores of the hydration products and the interface pores of the CUTB,has an irregular effect on the pore characteristics of the CUTB,and influences the UCS.
基金supported by The National Nat ural Science Foundation of China(No.42207184)Nature Science Basic Research Plan in Shaanxi Provi nce of China(No.2022JQ-253)。
文摘Limited by mining technology,mineral exploitation can produce large amounts of tailings.Heavy summer rainfall or seasonal freeze-thaw can lead to physical and chemical modification of tailing material in mountainous areas,resulting in fluidized tailings flow and severe disaster losses.Therefore,aiming at the problem of tailings fluidization catastrophe,this paper tried to reveal the rheological mechanism of tailings fluidization transformation by combining rheological tests and theoretical analysis.The results show that the yield stress increases with decreasing temperature,and when the density of debris flow(ρ)is more than 1.9 g/cm~3,this behavior becomes more pronounced as the density increases.The storage modulus decreases by at least two orders of magnitude at the solid-fluid transition under amplitude test sweep.Storage and loss modulus in the linear viscoelastic range and yield stress have an exponential growth relationship with sediment concentration.In addition,a stress constitutive relation and a new exponential law describing the evolution of yield stress required for solid-liquid transformation were proposed,and the relationship is further strengthened through a comprehensive analysis of existing results,which expands the evaluation application of the rheological characteristics of tailings flow.This paper provides a new insight into the rheological properties of tailing and how they occur through solid-liquid transition under different environments,which is beneficial to geological hazard prevention and the ecological remediation of the mining area.
基金Funded by the Natural Science Foundation of Nanping of China(No.N2021J002)Guangdong Basic and Applied Basic Research Foundation(No.2020A1515110304)+3 种基金Guangzhou Science and Technology Plan(No.202102020224)Natural Science Foundation of Fujian Province(No.2020Y0092)Natural Science Foundation of Fujian Province(No.2023J011044)Resource Chemical Industry and Technology Foundation of Nanping(No.N2020Z003)。
文摘To develop the microwave absorbing(MA)properties of cementitious material mixed with mine solid waste,the iron tailings cementitious microwave absorbing materials were prepared.The iron tailings was treated into different particle sizes by planetary ball mill,and the physicochemical properties of iron tailings were tested by laser particle size analyzer and scanning electron microscope(SEM).The electromagnetic parameters of iron tailings cementitious materials were characterized by a vector network analyzer and simulated MA properties,and the MA properties of iron tailings-cement composite system with steel fiber as absorber was studied.Based on the design of the single-layer structure,optimum mix ratio and thickness configuration method of double-layer structure were further studied,meanwhile,the mechanical properties and engineering application were analyzed and discussed.The results show that the particle size of iron tailings can afiect its electromagnetic behavior in cementitious materials,and the smaller particles lead the increase of demagnetisation efiect induced by domain wall motion and achieve better microwave absorbing properties in cementitious materials.When the thickness of matching layer and absorbing layer is 5 mm,the optimized microwave absorbing properties of C1/C3 double-layer cementitious material can obtain optimal RL value of-27.61 dB and efiective absorbing bandwidth of 0.97 GHz,which attributes to the synergistic efiect of impedance matching and attenuation characteristics.The double-layer microwave absorbing materials obtain excellent absorbing properties and show great design flexibility and diversity,which can be used as a suitable candidate for the preparation of favorable microwave absorbing cementitious materials.
基金supported by the National Natural Science Foundation of China (Grant nos. 42276240, 42206243, 41776188)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant no. XDB40000000)+3 种基金the Shanghai Sailing Program (Grant no. 22YF1418800)the China Postdoctoral Science Foundation (Grant no. 2022M712038)the Shanghai Frontiers Science Center of Polar Science (SCOPS)the Chinese Arctic and Antarctic Administration (CAA) for supporting the project
文摘Primary productivity in the Antarctic aquatic environment with simple ecosystems is sensitive to climate and environmental fluctuations.We investigatedδ13C values for n-alkanoic acids derived from phototrophic organisms in a lacustrine sediment core(IIL3)to indicate primary productivity in ponds on Inexpressible Island in the western Ross Sea,Antarctica.Short-chain n-alkanoic acids(C14–C18)were abundant in the IIL3 sediment profile.The carbon isotope ratios of short-chain n-alkanoic acids in the sediment samples and floating microbial mats were similar,indicating that the short-chain n-alkanoic acids in the IIL3 sediment profile predominantly originated from phototrophic organisms.Theδ13C values for the short-chain n-alkanoic acids varied widely through the sediment profile,and 13C-enrichment of n-alkanoic acids was most likely related to high productivity due to carbon-limited conditions caused by enhanced photosynthetic efficiency.Theδ13C values for the n-alkanoic acids changed over the past 3200 years in similar ways to organic proxies for aquatic productivity(n-alkanoic acid and sterol sedimentary fluxes).C16 n-alkanoic acid was enriched in 13C in periods of high aquatic productivity~750–1650 and 3000–3200 a BP but depleted in 13C in periods of relatively low productivity~150–600 and 2500–3000 a BP.The results indicated that carbon isotope ratios of lipids from phototrophic organisms could be used as new proxies to reconstruct paleo-productivity in Antarctic lakes and ponds and therefore improve our understanding of past climate changes.
基金wish to express their appreciation to Vale S.A.and Brazilian Research Council(CNPq)for the support to the research group.
文摘The disposal of mining tailings has increasingly focused on the use of dry stacks.These structures offer more security since they use filtered and compacted material.Because of the construction method and the heights achieved,the material that compounds the structure can be subjected to different stress paths along the failure plane.The theoretical framework considered in the design of these structures generally is the critical state soil mechanics(CSSM).However,the data in the literature concerning the uniqueness of critical state line(CSL)is still controversial as the soil is subjected to different stress paths.With respect to tailings,this question is even more restricted.This paper studies two tailings with different gradings due to the beneficial processes over extension and compression paths.A series of drained and undrained triaxial tests was conducted over a range of initial densities and stress levels.In the q-p'plane,different critical stress ratio(M)values were obtained for compression and extension stress paths.However,the critical state friction angle is very similar with a slightly higher critical state friction angle for extension tests.Curved stress path dependent CSLs were obtained in the n-lnp0 plane with the extension tests below the CSL defined in compression.Regarding the fines content,the studied tailings presented very similar M and critical state friction angle values.However,the fines content af-fects the volumetric behavior of the studied tailings and the CSLs on the n-lnp0 plane shift downwards with the increasing fines content for compression and extension tests.In relation to dilatancy analysis,the fines content did not present an evident influence on the dilatancy of the materials.However,different values of mean stress ratio N were obtained between compression and extension tests and can corroborate the existence of non-unique CSLs for these materials.
基金Supported by the National Natural Science Foundation of China(No.51674161)Major Basic Research Projects of Shandong Province Natural Science Foundation(No.ZR2017ZC0735)+1 种基金Open Topic of Key Laboratory of Gold Mineralization Processes and Resource Utilization Subordinated to the Ministry of Land and Resources and Key Laboratory of Metallogenic Geological Process and Resources Utilization in Shandong Province(No.Kfkt201812)Research on Precious Metal Mineral Achievement Integration and Tailings Comprehensive Utilization in Shandong Province(Shandong Geological Exploration Document:[2018]No.10)。
文摘Low-cost thermal insulation porous ceramics with uniform pore diameter and low bulk density were prepared with soda-ash dregs and felsic tailings.We investigated the effect of temperature,foaming agent,fluxing agent,Al_(2)O_(3)and CaO content on the pore structure and crystal phase of porous ceramics.The effect of Ca^(2+)in soda-ash dregs on the preparation of quartz-feldspar based porous ceramics was studied.The results showed that the contribution of Ca^(2+)to the preparation of porous ceramics in this system was mainly to accelerate the Si-O bond fracture and reduce the sintering temperature at the initial stage of sintering,which destroyed the needle-like feldspar in the high temperature melt and reduced the melt viscosity,thus reduced the foaming resistance and promoted the porous products with uniform pore size distribution.The Ca^(2+)content on the high side can participate in the formation of crystals in sintering.The generated needle-like diopside and augite,which have small length-diameter ratio,will negligibly change in the viscosity of melt at high temperatures,and their inhibition effect on pores is not as good as that of feldspar with large length-diameter ratio,resulting in the merger and collapse of pores.But the increase of diopside and augite can improve the compressive strength of porous products to some extent.Porous ceramic products containing needle-like feldspar phase can be prepared by using two kinds of solid waste,which can improve the compressive strength of the products and reduce the raw material cost and energy consumption while comprehensively utilizing the double solid waste.The optimal product has a bulk density of 0.45 g/cm^(3),a compressive strength of 3.17 MPa,and a thermal conductivity of 0.11 W/(m·K).
文摘This paper presents a study of the potential use of iron mining tailings as artificial pozzolan (metakaolin) after their submission to thermal treatment via calcination in a flash furnace. The research consists of the characterization of the tailings before and after calcination, chemical, mineralogical, thermogravimetric, and mechanical strength analyses were conducted. The results were compared with those for commonly used pozzolans, metakaolin, and similarities were identified. The study of the morphology of the particles before and after calcination was conducted through analyses of images obtained by scanning electronic microscope. The pozzolanic activity of the fine mining tailings calcined with flash technology was evaluated in uniaxial compression trials, which showed excellent results.
基金Supported by the Public Welfare Research Program of State Environmental Protection Administration(200909065)
文摘In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points and monitoring factors in thegraphic on the same factor axis can clearly express the intrinsic link between pollutantsand monitoring points and distribution characteristics.To determine the main monitoringpoint and the main monitoring indicators can reduce and optimize the number of monitoringpoints under the premise of ensuring the typical and representative of monitoring data.Using the correlation of pollutants can reduce the number of monitoring indicators and improvethe effectiveness of data collection.