For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geomet...For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.展开更多
The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting p...The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.展开更多
Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have ...Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have made rapid progress and substantial development in the chemistry and materials fields. However, the synthesis of COFs has been dominated by solvothermal methods for a long time and it usually involves high temperature, high pressure and toxic organic solvents, which created many challenges for environmental considerations. Recently,the exploration of new approaches for facile fabrication of COFs has aroused extensive interest. Hence, in this review, we comprehensively describe the synthetic strategies of COFs from the aspects of nonconventional heating methods and reaction media. In addition, the advantages,limitations and properties of the preparation methods are compared. Finally, we outline the main challenges and development prospects of the synthesis of COFs in the future and propose some possible solutions.展开更多
Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of hig...Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.展开更多
The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibite...The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed CO adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (OH) _(2) (NO _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSI) eff ect of the transfer of electron density from the electron-saturated defects on the TiO _(2) surface to Pt ^(4+) . In the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSI eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/TiO_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.展开更多
We analysed the photooxidation reaction in the electro-(1O2) and nucleophilic (O2•−) reaction of 2-pyridone azo derivatives. First, we calculated the energy (enthalpies) of tautomers formation, which is a measure of d...We analysed the photooxidation reaction in the electro-(1O2) and nucleophilic (O2•−) reaction of 2-pyridone azo derivatives. First, we calculated the energy (enthalpies) of tautomers formation, which is a measure of durability and the probability of their formation. We performed the light fastness calculations of the monoazopyridone dyes. Using the semi-empirical methods of quantum chemistry AM1 and PM3, the reactivity indicators of superdelocalisability (SrE(N)) and the electron density distribution in ground state on the highest occupied HOMO orbital and the lowest unoccupied excited state LUMO in 2-pyridone phenylazo derivatives were calculated. Superdelocalisability coefficients enable the stability to oxidising agents of various chemical molecules depending on the tautomeric forms in which they may occur. The results of the electron density calculations at the HOMO and LUMO boundary orbitals allow to determine the tendency to electrophilic attack with singlet oxygen 1O2 or nucleophilic attack of the superoxide anion O2•−on a specific atom in the molecule. The structure of the dyes was optimised with MM+, MD and AM1 or PM3 until a constant energy value was achieved with a convergence criterion of 0.01 kcal/mol.展开更多
The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
The orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore with NaOH aiming to comprehensively utilize zinc oxide ore.The optimized reaction conditions were molar ratio of NaOH to zinc...The orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore with NaOH aiming to comprehensively utilize zinc oxide ore.The optimized reaction conditions were molar ratio of NaOH to zinc oxide ore 6:1,roasting temperature 450°C,holding time 150 min.The molar ratio of NaOH to zinc oxide ore was the most predominant factor affecting the extraction ratios of zinc oxide and silica.The mineral phase transformations were investigated by testing the phases of specimens obtained at different temperatures.The process was that silica reacted with molten NaOH to form Na_2SiO_3 at first,then transformed into Na_4SiO_4 with temperature rising.ZnCO_3 and its decomposing product ZnO reacted with NaOH to form Na_2ZnO_2.Na_2ZnSiO_4was also obtained.The reaction rate was investigated using unreacted shrinking core model.Two models used were chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the reaction rate was combine-controlled by two models.The activation energy and frequency factor were obtained as 24.12 k J/mol and 0.0682,respectively.展开更多
Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-l...Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-like to large block with the increase of Al3Ti content. The addition of magnesium can markedly change the morphology of Al3Ti and reduce their size. Short rod-like Al3Ti was formed and homogeneous distribution was obtained with the addition of 3 wt.% Mg. The effect of Al3Ti and Mg on the microstructure of Al-Al3Ti composites and the mechanism were also discussed.展开更多
In this article the travelling wave solution for a class of nonlinear reaction diffusion problems are considered. Using the homotopic method and the theory of travelling wave transform, the approximate solution for th...In this article the travelling wave solution for a class of nonlinear reaction diffusion problems are considered. Using the homotopic method and the theory of travelling wave transform, the approximate solution for the corresponding problem is obtained.展开更多
Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estim...Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.展开更多
Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study,...Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study, using oily CRM sludge as sources of iron oxide, the strontium ferrite powders were synthesized in multiple steps including vacuum distillation, magnetic separation, oxidizing roasting, and solidstate reaction. The optimal technological conditions of vacuum distillation and oxidizing roasting were studied carefully. To consider the effects of Fe203/ SrCO3 tool ratio, calcination temperature, milling time and calcination time on magnetic properties of prepared strontium ferrite powders, the orthogonal experimental method was adopted. The maximum saturation magneti- zation （62.6 mA-m2.g-1） of the synthesized strontium ferrite powders was achieved at the Fe203/SrCO3 mol ratio of 6, 5 h milling time, 1250 ~C calcination temperature, and 1 h calcination time. Strontium ferrite powders syn- thesis method not only provides a cheap, high quality raw material for the production of strontium ferrite powders, but also effectively prevents the environmental pollution.展开更多
A patented kinetic uricase method was evaluated for serum uric acid assay. Initial absorbance of the reaction mixture before uricase action （A0） was obtained by correcting the absorbance at 293 nm measured before th...A patented kinetic uricase method was evaluated for serum uric acid assay. Initial absorbance of the reaction mixture before uricase action （A0） was obtained by correcting the absorbance at 293 nm measured before the addition of uricase solution, and background absorbance （Ab） was predicted by an integrated method. Uric acid concentration in reaction solution was calculated from AA, the difference between A0 and Ab, using the absorptivity preset for uric acid. This kinetic uricase method exhibited CV〈4.3% and recovery of 100%. Lipids, bilirubin, hemoglobin, ascorbic acid, reduced glutathione and xanthine 〈0.32 mmol/L in serum had no significant effects. △A linearly responded to 1.2 to 37.5 μmol/L uric acid in reaction solution containing 15 μl serum. The slope of linear response was consistent with the absorptivity preset for uric acid while the intercept was consistent with that for serum alone. Uric acid concentrations in clinic sera by different uricase methods positively correlated to each other. By Bland-Altman analysis, this kinetic uricase method accorded with that by quantifying the total change of UV absorbance on the completion of uricase reaction. These results demonstrated that this kinetic uricase method is reliable for serum uric acid assay with enhanced resistance to both xanthine and other common errors, wider range of linear response and much lower cost.展开更多
Tunnels are now an integral part of the infrastructure in major cities around the world. For many reasons, these tunnels have horseshoe-shaped cross-sections with round top and flat bottom. This paper presents some im...Tunnels are now an integral part of the infrastructure in major cities around the world. For many reasons, these tunnels have horseshoe-shaped cross-sections with round top and flat bottom. This paper presents some improvements to the use of the Hyperstatic Reaction Method-HRM for analysing tunnels with horseshoe-shaped cross-sections when these tunnels operate under the influence of earthquakes, particularly in cases when the tunnel lining is a continuous lining. The analysis used parameters of a tunnel from the Hanoi metro system, as well as parameters of the strongest earthquake that may occur in the central Hanoi area in the improved HRM and 2 D numerical methods using the ABAQUS software. On the basis of the results obtained, the paper gives conclusions about the HRM methodology when it is used to calculate tunnels that have horseshoe cross-sections operating under the influence of earthquakes.展开更多
Affordable non-precious metal（NPM） catalysts played a vital role in the wide application of polymer electrolyte membrane fuel cells（PEMFC）. In current work, a facile vacuum casting reacting method based on vacuum ...Affordable non-precious metal（NPM） catalysts played a vital role in the wide application of polymer electrolyte membrane fuel cells（PEMFC）. In current work, a facile vacuum casting reacting method based on vacuum casting was introduced to prepare Fe-N_x-C oxygen reduction reaction（ORR） catalysts with high efficient in acid medium. The catalysts were prepared with ammonium ferrous sulfate hexahydrate（AFS） and 1,10-phenanthroline monohydrate utilizing homemade mesoporous silica template. The heat treatment and its influence on structure and performance were systematically evaluated to achieve superior ORR performance and some clues were found. And 850 ℃ was found to be the best temperature for the first and second pyrolysis. The linear sweep voltammetry（LSV） results showed that there were only 18 mV slightly negative shifts of half-wave potential（E_（1/2）） of the optimal catalyst（749 mV） compared with the commercial Pt/C（20 μg·Pt·cm^-2）. Besides, I850 R also showed better electrochemical stability and methanol-tolerance than that of Pt/C. All evidences proved that our vacuum casting reacting strategy and heat treatment process were prospective for the future R＆D of high performance Fe-N_x-C ORR catalysts.展开更多
Three individual peaks of thermal solid-state reaction processes of the synthesized Mn0.90Co0.05Mg0.05HPO4?3H2O were observed corresponding to dehydration I,dehydration II and polycondensation processes.An alternative...Three individual peaks of thermal solid-state reaction processes of the synthesized Mn0.90Co0.05Mg0.05HPO4?3H2O were observed corresponding to dehydration I,dehydration II and polycondensation processes.An alternative method for the calculation of the extent of conversion was proposed from the peak area of the individual DTG peak after applying the best fitting deconvolution function(Frazer–Suzuki function).An iterative integral isoconversional equation was used to compute the values of the apparent activation energy Eαand they were found to be 65.87,78.16 and 119.32 kJ/mol for three peaks,respectively.Each individual peak was guaranteed to be a single-step kinetic system with its unique kinetic parameters.The reaction mechanism functions were selected by the comparison between experimental and model plots.The results show that the first,second and final individual peaks were two-dimensional diffusion of spherical symmetry(D2),three-dimensional diffusion of spherical symmetry(D3)and contracting cylinder(cylindrical symmetry,R2)mechanisms.Pre-exponential factor values of 3.91×106,1.35×107 and 2.15×107 s?1 were calculated from the Eαvalues and reaction mechanisms.The corresponded standard thermodynamic functions of the transition-state(activated)complexes were determined and found to agree well with the experimental data.展开更多
Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the opti...Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.展开更多
The reduction of molecular nitrogen(N_(2))to ammonia(NH_(3))under mild conditions is one of the most promising studies in the energy field due to the important role of NH_(3)in modern industry,production,and life.The ...The reduction of molecular nitrogen(N_(2))to ammonia(NH_(3))under mild conditions is one of the most promising studies in the energy field due to the important role of NH_(3)in modern industry,production,and life.The photocatalytic reduction of N_(2)is expected to achieve clean and sustainable NH_(3)production by using clean solar energy.To date,the new photocatalysts for photocatalytic reduction of N_(2)to NH_(3)at room temperature and atmospheric pressure have not been fully developed.The major challenge is to achieve high light-absorption efficiency,conversion efficiency,and stability of photocatalysts.Herein,the methods for measuring produced NH_(3)are compared,and the problems related to possible NH_(3)pollution in photocatalytic systems are mentioned to provide accurate ideas for measuring photocatalytic efficiency.The recent progress of nitrogen reduction reaction(NRR)photocatalysts at ambient temperature and pressure is summarized by introducing charge transfer,migration,and separation in photocatalytic NRR,which provides a guidance for the selection of future photocatalyst.More importantly,we introduce the latest research strategies of photocatalysts in detail,which can guide the preparation and design of photocatalysts with high NRR activity.展开更多
In this study, the activation cross-sections were measured for ^(232)Th(n,2n)^(231)Th reactions at neutron energies of 14.1 and 14.8 MeV, which were produced by a neutron generator through a T(d,n)~4He reaction. Induc...In this study, the activation cross-sections were measured for ^(232)Th(n,2n)^(231)Th reactions at neutron energies of 14.1 and 14.8 MeV, which were produced by a neutron generator through a T(d,n)~4He reaction. Induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector. In the cross-section calculations, corrections were made regarding the effects of gamma-ray attenuation, dead-time, fluctuation of the neutron flux, and low energy neutrons. The measured cross-sections were compared with the literature data, evaluation data(ENDF-B/VII.1, JENDL-4.0 and CENDL-3.1), and the results of the model calculation(TALYS1.6).展开更多
The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction...The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction probabilities are oscillatory with collision energy; the threshold energy of this ioniZation reaction is 2.8 ev, which is in modest agreement with experimental result.展开更多
文摘For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.
基金supported by the National Natural Science Foundation of China(Nos.52174277 and 51874077)the Fundamental Funds for the Central Universities,China(No.N2225032)+1 种基金the China Postdoctoral Science Foundation(No.2022M720683)the Postdoctoral Fund of Northeastern University,China。
文摘The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.
基金supported by the National Natural Science Foundation of China (Nos. 21822407 and 22074154)Youth Innovation Promotion Association CAS (2021420)the Foundation for Sci & Tech Research Project of Gansu Province (20JR10RA045 and 20JR5RA573)。
文摘Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have made rapid progress and substantial development in the chemistry and materials fields. However, the synthesis of COFs has been dominated by solvothermal methods for a long time and it usually involves high temperature, high pressure and toxic organic solvents, which created many challenges for environmental considerations. Recently,the exploration of new approaches for facile fabrication of COFs has aroused extensive interest. Hence, in this review, we comprehensively describe the synthetic strategies of COFs from the aspects of nonconventional heating methods and reaction media. In addition, the advantages,limitations and properties of the preparation methods are compared. Finally, we outline the main challenges and development prospects of the synthesis of COFs in the future and propose some possible solutions.
基金supported by Basic Frontier Scientific Research of the Chinese Academy of Sciences(ZDBS-LY-JSC041)the National Natural Science Foundation of China(22178348)+1 种基金the open research fund of the State Key Laboratory of Mesoscience and Engineering(MESO-23-D06)the Youth Innovation Promotion Association CAS(292021000085)。
文摘Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.
文摘The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed CO adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (OH) _(2) (NO _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSI) eff ect of the transfer of electron density from the electron-saturated defects on the TiO _(2) surface to Pt ^(4+) . In the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSI eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/TiO_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.
文摘We analysed the photooxidation reaction in the electro-(1O2) and nucleophilic (O2•−) reaction of 2-pyridone azo derivatives. First, we calculated the energy (enthalpies) of tautomers formation, which is a measure of durability and the probability of their formation. We performed the light fastness calculations of the monoazopyridone dyes. Using the semi-empirical methods of quantum chemistry AM1 and PM3, the reactivity indicators of superdelocalisability (SrE(N)) and the electron density distribution in ground state on the highest occupied HOMO orbital and the lowest unoccupied excited state LUMO in 2-pyridone phenylazo derivatives were calculated. Superdelocalisability coefficients enable the stability to oxidising agents of various chemical molecules depending on the tautomeric forms in which they may occur. The results of the electron density calculations at the HOMO and LUMO boundary orbitals allow to determine the tendency to electrophilic attack with singlet oxygen 1O2 or nucleophilic attack of the superoxide anion O2•−on a specific atom in the molecule. The structure of the dyes was optimised with MM+, MD and AM1 or PM3 until a constant energy value was achieved with a convergence criterion of 0.01 kcal/mol.
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
基金Projects(51774070,51204054)supported by the National Natural Science Foundation of ChinaProject(N150204009)supported by the Ministry of Education Basic Scientific Research Business Expenses,ChinaProject(2007CB613603)supported by the National Basic Research Program of China
文摘The orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore with NaOH aiming to comprehensively utilize zinc oxide ore.The optimized reaction conditions were molar ratio of NaOH to zinc oxide ore 6:1,roasting temperature 450°C,holding time 150 min.The molar ratio of NaOH to zinc oxide ore was the most predominant factor affecting the extraction ratios of zinc oxide and silica.The mineral phase transformations were investigated by testing the phases of specimens obtained at different temperatures.The process was that silica reacted with molten NaOH to form Na_2SiO_3 at first,then transformed into Na_4SiO_4 with temperature rising.ZnCO_3 and its decomposing product ZnO reacted with NaOH to form Na_2ZnO_2.Na_2ZnSiO_4was also obtained.The reaction rate was investigated using unreacted shrinking core model.Two models used were chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the reaction rate was combine-controlled by two models.The activation energy and frequency factor were obtained as 24.12 k J/mol and 0.0682,respectively.
文摘Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-like to large block with the increase of Al3Ti content. The addition of magnesium can markedly change the morphology of Al3Ti and reduce their size. Short rod-like Al3Ti was formed and homogeneous distribution was obtained with the addition of 3 wt.% Mg. The effect of Al3Ti and Mg on the microstructure of Al-Al3Ti composites and the mechanism were also discussed.
基金Supported by the National Natural Sciences Foundation of China(40676016 and 10471039)the National Key Project for Basic Research(2003CB415101-03 and 2004CB418304)+2 种基金the Key Project of the Chinese Academy of Sciences(KZCX3-SW-221)in part by E-Institutes of Shanghai Municipal Education Commission(N.E03004)the Natural Science Foundation of Zeijiang,China(Y606268).
文摘In this article the travelling wave solution for a class of nonlinear reaction diffusion problems are considered. Using the homotopic method and the theory of travelling wave transform, the approximate solution for the corresponding problem is obtained.
文摘Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.
基金supported by the National Key Technology R&D Program (Nos. 2012BAC02B01, 2012BAC12B05, 2011BAE13B07, and 2011BAC10B02)the National High Technology Research and Development Program of China (No. 2012AA063202)+2 种基金the National Natural Science Foundation of China (Nos. 51174247 and 51004011)the Science and Technology Program of Guangdong Province, China (No. 2010A030200003)the Ph.D. Programs Foundation of the Ministry of Education of China (No. 2010000612003)
文摘Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study, using oily CRM sludge as sources of iron oxide, the strontium ferrite powders were synthesized in multiple steps including vacuum distillation, magnetic separation, oxidizing roasting, and solidstate reaction. The optimal technological conditions of vacuum distillation and oxidizing roasting were studied carefully. To consider the effects of Fe203/ SrCO3 tool ratio, calcination temperature, milling time and calcination time on magnetic properties of prepared strontium ferrite powders, the orthogonal experimental method was adopted. The maximum saturation magneti- zation （62.6 mA-m2.g-1） of the synthesized strontium ferrite powders was achieved at the Fe203/SrCO3 mol ratio of 6, 5 h milling time, 1250 ~C calcination temperature, and 1 h calcination time. Strontium ferrite powders syn- thesis method not only provides a cheap, high quality raw material for the production of strontium ferrite powders, but also effectively prevents the environmental pollution.
基金Project (No. 30200266) supported by the National Natural Science Foundation of China
文摘A patented kinetic uricase method was evaluated for serum uric acid assay. Initial absorbance of the reaction mixture before uricase action （A0） was obtained by correcting the absorbance at 293 nm measured before the addition of uricase solution, and background absorbance （Ab） was predicted by an integrated method. Uric acid concentration in reaction solution was calculated from AA, the difference between A0 and Ab, using the absorptivity preset for uric acid. This kinetic uricase method exhibited CV〈4.3% and recovery of 100%. Lipids, bilirubin, hemoglobin, ascorbic acid, reduced glutathione and xanthine 〈0.32 mmol/L in serum had no significant effects. △A linearly responded to 1.2 to 37.5 μmol/L uric acid in reaction solution containing 15 μl serum. The slope of linear response was consistent with the absorptivity preset for uric acid while the intercept was consistent with that for serum alone. Uric acid concentrations in clinic sera by different uricase methods positively correlated to each other. By Bland-Altman analysis, this kinetic uricase method accorded with that by quantifying the total change of UV absorbance on the completion of uricase reaction. These results demonstrated that this kinetic uricase method is reliable for serum uric acid assay with enhanced resistance to both xanthine and other common errors, wider range of linear response and much lower cost.
基金supported by the Saint Petersburg Mining University
文摘Tunnels are now an integral part of the infrastructure in major cities around the world. For many reasons, these tunnels have horseshoe-shaped cross-sections with round top and flat bottom. This paper presents some improvements to the use of the Hyperstatic Reaction Method-HRM for analysing tunnels with horseshoe-shaped cross-sections when these tunnels operate under the influence of earthquakes, particularly in cases when the tunnel lining is a continuous lining. The analysis used parameters of a tunnel from the Hanoi metro system, as well as parameters of the strongest earthquake that may occur in the central Hanoi area in the improved HRM and 2 D numerical methods using the ABAQUS software. On the basis of the results obtained, the paper gives conclusions about the HRM methodology when it is used to calculate tunnels that have horseshoe cross-sections operating under the influence of earthquakes.
基金the financial support of the 100-Talent Program of Chinese Academy of Sciences
文摘Affordable non-precious metal（NPM） catalysts played a vital role in the wide application of polymer electrolyte membrane fuel cells（PEMFC）. In current work, a facile vacuum casting reacting method based on vacuum casting was introduced to prepare Fe-N_x-C oxygen reduction reaction（ORR） catalysts with high efficient in acid medium. The catalysts were prepared with ammonium ferrous sulfate hexahydrate（AFS） and 1,10-phenanthroline monohydrate utilizing homemade mesoporous silica template. The heat treatment and its influence on structure and performance were systematically evaluated to achieve superior ORR performance and some clues were found. And 850 ℃ was found to be the best temperature for the first and second pyrolysis. The linear sweep voltammetry（LSV） results showed that there were only 18 mV slightly negative shifts of half-wave potential（E_（1/2）） of the optimal catalyst（749 mV） compared with the commercial Pt/C（20 μg·Pt·cm^-2）. Besides, I850 R also showed better electrochemical stability and methanol-tolerance than that of Pt/C. All evidences proved that our vacuum casting reacting strategy and heat treatment process were prospective for the future R＆D of high performance Fe-N_x-C ORR catalysts.
基金supported by King Mongkut’s Institute of Technology Ladkrabang [KREF146001]
文摘Three individual peaks of thermal solid-state reaction processes of the synthesized Mn0.90Co0.05Mg0.05HPO4?3H2O were observed corresponding to dehydration I,dehydration II and polycondensation processes.An alternative method for the calculation of the extent of conversion was proposed from the peak area of the individual DTG peak after applying the best fitting deconvolution function(Frazer–Suzuki function).An iterative integral isoconversional equation was used to compute the values of the apparent activation energy Eαand they were found to be 65.87,78.16 and 119.32 kJ/mol for three peaks,respectively.Each individual peak was guaranteed to be a single-step kinetic system with its unique kinetic parameters.The reaction mechanism functions were selected by the comparison between experimental and model plots.The results show that the first,second and final individual peaks were two-dimensional diffusion of spherical symmetry(D2),three-dimensional diffusion of spherical symmetry(D3)and contracting cylinder(cylindrical symmetry,R2)mechanisms.Pre-exponential factor values of 3.91×106,1.35×107 and 2.15×107 s?1 were calculated from the Eαvalues and reaction mechanisms.The corresponded standard thermodynamic functions of the transition-state(activated)complexes were determined and found to agree well with the experimental data.
基金Funded by the National Natural Science Foundation of China(No.51004074)
文摘Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.
基金Taishan Scholars Program of Shandong Province,Grant/Award Number:tsqn201812068Higher School Youth Innovation Team of Shandong Province,Grant/Award Number:2019KJA013+1 种基金The Opening Fund of State Key Laboratory of Heavy Oil Processing,Grant/Award Number:SKLOP202002006National Natural Science Foundation of China,Grant/Award Number:51872173。
文摘The reduction of molecular nitrogen(N_(2))to ammonia(NH_(3))under mild conditions is one of the most promising studies in the energy field due to the important role of NH_(3)in modern industry,production,and life.The photocatalytic reduction of N_(2)is expected to achieve clean and sustainable NH_(3)production by using clean solar energy.To date,the new photocatalysts for photocatalytic reduction of N_(2)to NH_(3)at room temperature and atmospheric pressure have not been fully developed.The major challenge is to achieve high light-absorption efficiency,conversion efficiency,and stability of photocatalysts.Herein,the methods for measuring produced NH_(3)are compared,and the problems related to possible NH_(3)pollution in photocatalytic systems are mentioned to provide accurate ideas for measuring photocatalytic efficiency.The recent progress of nitrogen reduction reaction(NRR)photocatalysts at ambient temperature and pressure is summarized by introducing charge transfer,migration,and separation in photocatalytic NRR,which provides a guidance for the selection of future photocatalyst.More importantly,we introduce the latest research strategies of photocatalysts in detail,which can guide the preparation and design of photocatalysts with high NRR activity.
基金Supported by National Natural Science Foundation of China(No.11205076)
文摘In this study, the activation cross-sections were measured for ^(232)Th(n,2n)^(231)Th reactions at neutron energies of 14.1 and 14.8 MeV, which were produced by a neutron generator through a T(d,n)~4He reaction. Induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector. In the cross-section calculations, corrections were made regarding the effects of gamma-ray attenuation, dead-time, fluctuation of the neutron flux, and low energy neutrons. The measured cross-sections were compared with the literature data, evaluation data(ENDF-B/VII.1, JENDL-4.0 and CENDL-3.1), and the results of the model calculation(TALYS1.6).
文摘The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction probabilities are oscillatory with collision energy; the threshold energy of this ioniZation reaction is 2.8 ev, which is in modest agreement with experimental result.
