Cyber-physical power system(CPPS)has significantly improved the operational efficiency of power systems.However,cross-space cascading failures may occur due to the coupling characteristics,which poses a great threat t...Cyber-physical power system(CPPS)has significantly improved the operational efficiency of power systems.However,cross-space cascading failures may occur due to the coupling characteristics,which poses a great threat to the safety and reliability of CPPS,and there is an acute need to reduce the probability of these failures.Towards this end,this paper first proposes a cascading failure index to identify and quantify the importance of different information in the same class of communication services.On this basis,a joint improved risk-balanced service function chain routing strategy(SFC-RS)is proposed,which is modeled as a robust optimization problem and solved by column-and-constraint generation(C-CG)algorithm.Compared with the traditional shortest-path routing algorithm,the superiority of SFC-RS is verified in the IEEE 30-bus system.The results demonstrate that SFC-RS effectively mitigates the risk associated with information transmission in the network,enhances information transmission accessibility,and effectively limits communication disruption from becoming the cause of cross-space cascading failures.展开更多
A generalized form of the error function, Gp(x)=pΓ(1/p)∫0xe−tpdt, which is directly associated with the gamma function, is evaluated for arbitrary real values of p>1and 0x≤+∞by employing a fast-converging power...A generalized form of the error function, Gp(x)=pΓ(1/p)∫0xe−tpdt, which is directly associated with the gamma function, is evaluated for arbitrary real values of p>1and 0x≤+∞by employing a fast-converging power series expansion developed in resolving the so-called Grandi’s paradox. Comparisons with accurate tabulated values for well-known cases such as the error function are presented using the expansions truncated at various orders.展开更多
A new method——the third power B-spline function method is developed to analyse the stability and the buckle of rolled strip under residual stress.The large deflection theory of thin plate is used to calculate the bu...A new method——the third power B-spline function method is developed to analyse the stability and the buckle of rolled strip under residual stress.The large deflection theory of thin plate is used to calculate the buckle of rolled strip and criterion of critical buckle is given.The computed results tally with those of experiment well,which provides theoretical basis and method for developing the mathematical model of flatness control.展开更多
Large numbers of basic transceiver stations,where the telecommunication room is one of the main components,comprise an important part of the telecommunication system.After earthquakes,considerable economic loss from t...Large numbers of basic transceiver stations,where the telecommunication room is one of the main components,comprise an important part of the telecommunication system.After earthquakes,considerable economic loss from telecommunication systems is often associated with seismic damage and functional loss of the telecommunication room.However,research related to this has been limited.In this study,shaking table tests were conducted for a full-scale typical telecommunication room,including a light-steel house and the necessary communication and power supply equipment.The tests not only focused on the seismic damage to all the structures but also considered the functions of the communication and power supply of the equipment.The interactions between these facilities and their effects on communication function were also investigated.Compared with the damage to structures,the interruption of the power supply due to earthquakes is a weak link.Finally,the damage indexes,together with their threshold values of different damage states for the communication and power supply equipment,were derived from the test results.The results of this research can contribute to the literature gaps regarding seismic performance studies of telecommunication rooms,and can serve as a valuable reference for future research on its seismic fragility and economic losses evaluation.展开更多
A general technique to obtain simple analytic approximations for the first kind of modified Bessel functions. The general procedure is shown, and the parameter determination is explained through the applications to th...A general technique to obtain simple analytic approximations for the first kind of modified Bessel functions. The general procedure is shown, and the parameter determination is explained through the applications to this particular case I1/6(x)and I1/7(x). In this way, it shows how to apply the technique to any particular orderν, in order to obtain an approximation valid for any positive value of the variable x. In the present method power series and asymptotic expansion are simultaneously used. The technique is an extension of the multipoint quasirational approximation method, MPQA. The main idea is to look for a bridge function between the power and asymptotic expansion of the I1/6(x), and similar procedure for I1/7(x). To perform this, rational functions are combined with hyperbolic ones and fractional powers. The number of parameters to be determined for each case is four. The maximum relative errors are 0.0049 for ν=1/6, and 0.0047 for ν=7. However, these relative errors decrease outside of the small region of the variables, wherein the maximum relative errors are reached. There is a clear advantage of this procedure compared with any other ones.展开更多
A low-power IC for function electrical stimulation （FES） of nerves is designed for an implantable system and fabricated in CSMC＇s 0.6μm CMOS technology. The IC can be used for stimulating animals＇ spinal nerve bu...A low-power IC for function electrical stimulation （FES） of nerves is designed for an implantable system and fabricated in CSMC＇s 0.6μm CMOS technology. The IC can be used for stimulating animals＇ spinal nerve bundles and other nerves connected with a cuff type electrode. It consists of a pre-amplifier,a main amplifier,and an output stage. According to the neural signal spectrum,the bandwidth of the FES signal generator circuit is defined from 1Hz to 400kHz. The gain of the circuit is about 66dB with an output impedance of 900. The 1C can function under a single supply voltage of 3-5V. A rail-to-rail output stage helps to use the coupled power efficiently. The measured time domain performance shows that the bandwidth and the gain of the IC agree with the design. The power consumption is lower than 6mW.展开更多
In this paper,a new micro-creep model of salt rock is proposed based on a linear parallel bonded model(LPBM)using the two-dimensional particle flow code(PFC2D).The power function weakening form is assumed to describe ...In this paper,a new micro-creep model of salt rock is proposed based on a linear parallel bonded model(LPBM)using the two-dimensional particle flow code(PFC2D).The power function weakening form is assumed to describe the variation of the parallel bonded diameter(PBD)over time.By comparing with the parallel-bonded stress corrosion(PSC)model,a smaller stress fluctuation and smoother creep strain−time curves can be obtained by this power function model at the same stress level.The validity and adaptability of the model to simulate creep deformation of salt rock are verified through comparing the laboratory creep test curves and the Burgers model fitting result.The numerical results reveal that this model can be capable of capturing the creep deformation and damage behavior from the laboratory observations.展开更多
This study proposes a wind farm active power dispatching(WFAPD) algorithm based on the grey incidence method, which does not rely on an accurate mathematical model of wind turbines. Based on the wind turbine start-sto...This study proposes a wind farm active power dispatching(WFAPD) algorithm based on the grey incidence method, which does not rely on an accurate mathematical model of wind turbines. Based on the wind turbine start-stop data at different wind speeds, the weighting coefficients, which are the participation degrees of a variable speed system and a variable pitch system in power regulation, are obtained using the grey incidence method. The incidence coefficient curve is fitted by the B-spline function at a full range of wind speeds, and the power regulation capacity of all wind turbines is obtained. Finally, the WFAPD algorithm, which is based on the regulating capacity of each wind turbine, is compared with the wind speed weighting power dispatching(WSWPD) algorithm in MATLAB. The simulation results show that the active power fluctuation of the wind farm is smaller, the rotating speed of wind turbines is smoother, and the fatigue load of highspeed turbines is effectively reduced.展开更多
Based on the independent, continuous and map- ping （ICM） method and homogenization method, a research model is constructed to propose and deduce a theorem and corollary from the invariant between the weight filter f...Based on the independent, continuous and map- ping （ICM） method and homogenization method, a research model is constructed to propose and deduce a theorem and corollary from the invariant between the weight filter func- tion and the corresponding stiffness filter function of the form of power function. The efficiency in searching for op- timum solution will be raised via the choice of rational filter functions, so the above mentioned results are very important to the further study of structural topology optimization.展开更多
The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load...The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.展开更多
The analytic solution of the radial Schrodinger equation is studied by using the tight coupling condition of several positive-power and inverse-power potential functions in this article. Furthermore, the precisely ana...The analytic solution of the radial Schrodinger equation is studied by using the tight coupling condition of several positive-power and inverse-power potential functions in this article. Furthermore, the precisely analytic solutions and the conditions that decide the existence of analytic solution have been searched when the potential of the radial Schrodinger equation is V（r） =α1r^8 ＋α2r^3 ＋ α3r^2 ＋β3r^-1 ＋β2r^-3 ＋β1r6-4. Generally speaking, there is only an approximate solution, but not analytic solution for SchrSdinger equation with several potentials＇ superposition. However, the conditions that decide the existence of analytic solution have been found and the analytic solution and its energy level structure are obtained for the Schrodinger equation with the potential which is motioned above in this paper. According to the single-value, finite and continuous standard of wave function in a quantum system, the authors firstly solve the asymptotic solution through the radial coordinate r → ∞ and r →0; secondly, they make the asymptotic solutions combining with the series solutions nearby the neighborhood of irregular singularities; and then they compare the power series coefficients, deduce a series of analytic solutions of the stationary state wave function and corresponding energy level structure by tight coupling among the coefficients of potential functions for the radial SchrSdinger equation; and lastly, they discuss the solutions and make conclusions.展开更多
This paper describes an approximating solution, based on Lagrange interpolation and spline functions, to treat functional integral equations of Fredholm type and Volterra type. This method extended to functional integ...This paper describes an approximating solution, based on Lagrange interpolation and spline functions, to treat functional integral equations of Fredholm type and Volterra type. This method extended to functional integral and integro-differential equations. For showing efficiency of the method we give some numerical examples.展开更多
A multi-group pin power reconstruction method that fully exploits nodal information obtained from global coarse mesh solution has been developed.It expands the intra-nodal flux distributions into nonseparable semi-ana...A multi-group pin power reconstruction method that fully exploits nodal information obtained from global coarse mesh solution has been developed.It expands the intra-nodal flux distributions into nonseparable semi-analytic basis functions,and a colorset based form function generating method is proposed,which can accurately model the spectral interaction occurring at assembly interface.To demonstrate its accuracy and applicability to realistic problems, the new method is tested against two benchmark problems,including a mixed-oxide fuel problem.The results show that the new method is comparable in accuracy to fine-mesh methods.展开更多
A new exact and universal conformal mapping is proposed. Using Muskhelishvili＇s complex potential method, the plane elasticity problem of power function curved cracks is investigated with an arbitrary power of a natu...A new exact and universal conformal mapping is proposed. Using Muskhelishvili＇s complex potential method, the plane elasticity problem of power function curved cracks is investigated with an arbitrary power of a natural number, and the general solutions of the stress intensity factors （SIFs） for mode I and mode II at the crack tip are obtained under the remotely uniform tensile loads. The present results can be reduced to the well-known solutions when the power of the function takes different natural numbers. Numerical examples are conducted to reveal the effects of the coefficient, the power, and the projected length along the x-axis of the power function curved crack on the SIFs for mode I and mode II.展开更多
The Weibull distribution is a probability density function (PDF) which is widely used in the study of meteorological data. The statistical analysis of the wind speed v by using the Weibull distribution leads to the es...The Weibull distribution is a probability density function (PDF) which is widely used in the study of meteorological data. The statistical analysis of the wind speed v by using the Weibull distribution leads to the estimate of the mean wind speed , the variance of v around and the mean power density in the wind. The gamma function Γ is involved in those calculations, particularly Γ (1+1/k), Γ (1+2/k) and Γ (1+3/k). The paper reports the use of the Weibull PDF f(v) to estimate the gamma function. The study was performed by looking for the wind speeds related to the maximum values of f(v), v2 f(v) and v3 f(v). As a result, some approximate relationships were obtained for Γ (1+1/k), Γ (1+2/k) and Γ (1+3/k), that use some fitting polynomial functions. Very good agreements were found between the exact and the estimated values of Γ (1+n/k) that can be used for the estimation of the mean wind speed , the variance σ2 of the wind speed v;around the mean speed and the average wind power density.展开更多
In this review,the application of light ion irradiation is discussed for tailoring novel functional materials and for improving the performance in SiC or Si based electrical power devices.The deep traps and electronic...In this review,the application of light ion irradiation is discussed for tailoring novel functional materials and for improving the performance in SiC or Si based electrical power devices.The deep traps and electronic disorder produced by light ion irradiation can modify the electrical,magnetic,and optical properties of films(e.g.,dilute ferromagnetic semiconductors and topological materials).Additionally,benefiting from the high reproducibility,precise manipulation of functional depth and density of defects,as well as the flexible patternability,the helium or proton ion irradiation has been successfully employed in improving the dynamic performance of SiC and Si based PiN diode power devices by reducing their majority carrier lifetime,although the static performance is sacrificed due to deep level traps.Such a trade-off has been regarded as the key point to compromise the static and dynamic performances of power devices.As a result,herein the light ion irradiation is highlighted in both exploring new physics and optimizing the performance in functional materials and electrical devices.展开更多
For the characterization of the power function distribution, one needs any arbitrary non constant function only in place of independence of suitable function of order statistics, linear relation of conditional expecta...For the characterization of the power function distribution, one needs any arbitrary non constant function only in place of independence of suitable function of order statistics, linear relation of conditional expectation, recurrence relations between expectations of function of order statistics, distributional properties of exponential distribution, record valves, lower record statistics, product of order statistics and Lorenz curve, etc. available in the literature. The goal of this research is not to give a different path-breaking approach for the characterization of power function distribution through the expectation of non constant function of random variable and provide a method to characterize the power function distribution as remark. Examples are given for the illustrative purpose.展开更多
This paper presents the way to make expansion for the next form function: to the numerical series. The most widely used methods to solve this problem are Newtons Binomial Theorem and Fundamental Theorem of Calculus (t...This paper presents the way to make expansion for the next form function: to the numerical series. The most widely used methods to solve this problem are Newtons Binomial Theorem and Fundamental Theorem of Calculus (that is, derivative and integral are inverse operators). The paper provides the other kind of solution, except above described theorems.展开更多
For any positive integer n, the famous Smarandache power function SP（n） is defined as the smallest positive integer m such that n｜m^m, where m and n have the same prime divisors. The main purpose of this paper is u...For any positive integer n, the famous Smarandache power function SP（n） is defined as the smallest positive integer m such that n｜m^m, where m and n have the same prime divisors. The main purpose of this paper is using the elementary methods to study the positive integer solutions of an equation involving the Smarandache power function SP（n） and obtain some interesting results. At the same time, we give an open problem about the related equation.展开更多
In practice,the control charts for monitoring of process mean are based on the normality assumption.But the performance of the control charts is seriously affected if the process of quality characteristics departs fro...In practice,the control charts for monitoring of process mean are based on the normality assumption.But the performance of the control charts is seriously affected if the process of quality characteristics departs from normality.For such situations,we have modified the already existing control charts such as Shewhart control chart,exponentially weighted moving average(EWMA)control chart and hybrid exponentially weighted moving average(HEWMA)control chart by assuming that the distribution of underlying process follows Power function distribution(PFD).By considering the situation that the parameters of PFD are unknown,we estimate them by using three classical estimation methods,i.e.,percentile estimator(P.E),maximum likelihood estimator(MLE)and modified maximum likelihood estimator(MMLE).We construct Shewhart,EWMA and HEWMA control charts based on P.E,MLE and MMLE.We have compared all these control charts using Monte Carlo simulation studies and concluded that HEWMA control chart under MLE is more sensitive to detect an early shift in the shape parameter when the distribution of the underlying process follows power function distribution.展开更多
基金funded by the National Natural Science Foundation of China under Grant 52177074.
文摘Cyber-physical power system(CPPS)has significantly improved the operational efficiency of power systems.However,cross-space cascading failures may occur due to the coupling characteristics,which poses a great threat to the safety and reliability of CPPS,and there is an acute need to reduce the probability of these failures.Towards this end,this paper first proposes a cascading failure index to identify and quantify the importance of different information in the same class of communication services.On this basis,a joint improved risk-balanced service function chain routing strategy(SFC-RS)is proposed,which is modeled as a robust optimization problem and solved by column-and-constraint generation(C-CG)algorithm.Compared with the traditional shortest-path routing algorithm,the superiority of SFC-RS is verified in the IEEE 30-bus system.The results demonstrate that SFC-RS effectively mitigates the risk associated with information transmission in the network,enhances information transmission accessibility,and effectively limits communication disruption from becoming the cause of cross-space cascading failures.
文摘A generalized form of the error function, Gp(x)=pΓ(1/p)∫0xe−tpdt, which is directly associated with the gamma function, is evaluated for arbitrary real values of p>1and 0x≤+∞by employing a fast-converging power series expansion developed in resolving the so-called Grandi’s paradox. Comparisons with accurate tabulated values for well-known cases such as the error function are presented using the expansions truncated at various orders.
文摘A new method——the third power B-spline function method is developed to analyse the stability and the buckle of rolled strip under residual stress.The large deflection theory of thin plate is used to calculate the buckle of rolled strip and criterion of critical buckle is given.The computed results tally with those of experiment well,which provides theoretical basis and method for developing the mathematical model of flatness control.
基金Key Project of the Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant Nos.2020EEEVL0502 and 2019EEEVL0304。
文摘Large numbers of basic transceiver stations,where the telecommunication room is one of the main components,comprise an important part of the telecommunication system.After earthquakes,considerable economic loss from telecommunication systems is often associated with seismic damage and functional loss of the telecommunication room.However,research related to this has been limited.In this study,shaking table tests were conducted for a full-scale typical telecommunication room,including a light-steel house and the necessary communication and power supply equipment.The tests not only focused on the seismic damage to all the structures but also considered the functions of the communication and power supply of the equipment.The interactions between these facilities and their effects on communication function were also investigated.Compared with the damage to structures,the interruption of the power supply due to earthquakes is a weak link.Finally,the damage indexes,together with their threshold values of different damage states for the communication and power supply equipment,were derived from the test results.The results of this research can contribute to the literature gaps regarding seismic performance studies of telecommunication rooms,and can serve as a valuable reference for future research on its seismic fragility and economic losses evaluation.
文摘A general technique to obtain simple analytic approximations for the first kind of modified Bessel functions. The general procedure is shown, and the parameter determination is explained through the applications to this particular case I1/6(x)and I1/7(x). In this way, it shows how to apply the technique to any particular orderν, in order to obtain an approximation valid for any positive value of the variable x. In the present method power series and asymptotic expansion are simultaneously used. The technique is an extension of the multipoint quasirational approximation method, MPQA. The main idea is to look for a bridge function between the power and asymptotic expansion of the I1/6(x), and similar procedure for I1/7(x). To perform this, rational functions are combined with hyperbolic ones and fractional powers. The number of parameters to be determined for each case is four. The maximum relative errors are 0.0049 for ν=1/6, and 0.0047 for ν=7. However, these relative errors decrease outside of the small region of the variables, wherein the maximum relative errors are reached. There is a clear advantage of this procedure compared with any other ones.
文摘A low-power IC for function electrical stimulation （FES） of nerves is designed for an implantable system and fabricated in CSMC＇s 0.6μm CMOS technology. The IC can be used for stimulating animals＇ spinal nerve bundles and other nerves connected with a cuff type electrode. It consists of a pre-amplifier,a main amplifier,and an output stage. According to the neural signal spectrum,the bandwidth of the FES signal generator circuit is defined from 1Hz to 400kHz. The gain of the circuit is about 66dB with an output impedance of 900. The 1C can function under a single supply voltage of 3-5V. A rail-to-rail output stage helps to use the coupled power efficiently. The measured time domain performance shows that the bandwidth and the gain of the IC agree with the design. The power consumption is lower than 6mW.
基金Projects(51621006,51874274)supported by the National Natural Science Foundation of ChinaProject(2018YFC0808401)supported by the National Key Research and Development Program of China
文摘In this paper,a new micro-creep model of salt rock is proposed based on a linear parallel bonded model(LPBM)using the two-dimensional particle flow code(PFC2D).The power function weakening form is assumed to describe the variation of the parallel bonded diameter(PBD)over time.By comparing with the parallel-bonded stress corrosion(PSC)model,a smaller stress fluctuation and smoother creep strain−time curves can be obtained by this power function model at the same stress level.The validity and adaptability of the model to simulate creep deformation of salt rock are verified through comparing the laboratory creep test curves and the Burgers model fitting result.The numerical results reveal that this model can be capable of capturing the creep deformation and damage behavior from the laboratory observations.
基金supported by the Special Scientific Research Project of the Shaanxi Provincial Education Department (22JK0414)。
文摘This study proposes a wind farm active power dispatching(WFAPD) algorithm based on the grey incidence method, which does not rely on an accurate mathematical model of wind turbines. Based on the wind turbine start-stop data at different wind speeds, the weighting coefficients, which are the participation degrees of a variable speed system and a variable pitch system in power regulation, are obtained using the grey incidence method. The incidence coefficient curve is fitted by the B-spline function at a full range of wind speeds, and the power regulation capacity of all wind turbines is obtained. Finally, the WFAPD algorithm, which is based on the regulating capacity of each wind turbine, is compared with the wind speed weighting power dispatching(WSWPD) algorithm in MATLAB. The simulation results show that the active power fluctuation of the wind farm is smaller, the rotating speed of wind turbines is smoother, and the fatigue load of highspeed turbines is effectively reduced.
基金supported by the National Natural Science Foundation of China(11172013)Foundation of National Key Laboratory for Structural Analysis of Industrial Equipment in Dalian University of Technology Foundations(GZ1008)
文摘Based on the independent, continuous and map- ping （ICM） method and homogenization method, a research model is constructed to propose and deduce a theorem and corollary from the invariant between the weight filter func- tion and the corresponding stiffness filter function of the form of power function. The efficiency in searching for op- timum solution will be raised via the choice of rational filter functions, so the above mentioned results are very important to the further study of structural topology optimization.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51277043)
文摘The uniform mathematical model of distortion signals in power grid has been setup with the theory of Wiener-G Functional. Firstly,the Matlab simulation models were established. Secondly,the Wiener kernel of power load was found based on the Gaussian white noise as input. And then the uniform mathematical model of the power grid signal was established according to the homogeneous of the same order of Wiener functional series. Finally,taking three typical distortion sources which are semiconductor rectifier,electric locomotive and electric arc furnace in power grid as examples,we have validated the model through the Matlab simulation and analyzed the simulation errors. The results show that the uniform mathematical model of distortion signals in power grid can approximation the actual model by growing the items of the series under the condition of the enough storage space and computing speed.
基金supported by the National Natural Science Foundation of China under Grant No.10575140the Basic Research of Chongqing Education Committee under Grant No.KJ060813
文摘The analytic solution of the radial Schrodinger equation is studied by using the tight coupling condition of several positive-power and inverse-power potential functions in this article. Furthermore, the precisely analytic solutions and the conditions that decide the existence of analytic solution have been searched when the potential of the radial Schrodinger equation is V（r） =α1r^8 ＋α2r^3 ＋ α3r^2 ＋β3r^-1 ＋β2r^-3 ＋β1r6-4. Generally speaking, there is only an approximate solution, but not analytic solution for SchrSdinger equation with several potentials＇ superposition. However, the conditions that decide the existence of analytic solution have been found and the analytic solution and its energy level structure are obtained for the Schrodinger equation with the potential which is motioned above in this paper. According to the single-value, finite and continuous standard of wave function in a quantum system, the authors firstly solve the asymptotic solution through the radial coordinate r → ∞ and r →0; secondly, they make the asymptotic solutions combining with the series solutions nearby the neighborhood of irregular singularities; and then they compare the power series coefficients, deduce a series of analytic solutions of the stationary state wave function and corresponding energy level structure by tight coupling among the coefficients of potential functions for the radial SchrSdinger equation; and lastly, they discuss the solutions and make conclusions.
文摘This paper describes an approximating solution, based on Lagrange interpolation and spline functions, to treat functional integral equations of Fredholm type and Volterra type. This method extended to functional integral and integro-differential equations. For showing efficiency of the method we give some numerical examples.
基金Partially supported by the National Natural Science Foundation of China via research project 10605016
文摘A multi-group pin power reconstruction method that fully exploits nodal information obtained from global coarse mesh solution has been developed.It expands the intra-nodal flux distributions into nonseparable semi-analytic basis functions,and a colorset based form function generating method is proposed,which can accurately model the spectral interaction occurring at assembly interface.To demonstrate its accuracy and applicability to realistic problems, the new method is tested against two benchmark problems,including a mixed-oxide fuel problem.The results show that the new method is comparable in accuracy to fine-mesh methods.
基金supported by the National Natural Science Foundation of China(Nos.10932001,11072015, and 10761005)the Scientific Research Key Program of Beijing Municipal Commission of Education (No.KZ201010005003)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20101102110016)the Ph.D.Innovation Foundation of Beijing University of Aeronautics and Astronautics(No.300351)
文摘A new exact and universal conformal mapping is proposed. Using Muskhelishvili＇s complex potential method, the plane elasticity problem of power function curved cracks is investigated with an arbitrary power of a natural number, and the general solutions of the stress intensity factors （SIFs） for mode I and mode II at the crack tip are obtained under the remotely uniform tensile loads. The present results can be reduced to the well-known solutions when the power of the function takes different natural numbers. Numerical examples are conducted to reveal the effects of the coefficient, the power, and the projected length along the x-axis of the power function curved crack on the SIFs for mode I and mode II.
文摘The Weibull distribution is a probability density function (PDF) which is widely used in the study of meteorological data. The statistical analysis of the wind speed v by using the Weibull distribution leads to the estimate of the mean wind speed , the variance of v around and the mean power density in the wind. The gamma function Γ is involved in those calculations, particularly Γ (1+1/k), Γ (1+2/k) and Γ (1+3/k). The paper reports the use of the Weibull PDF f(v) to estimate the gamma function. The study was performed by looking for the wind speeds related to the maximum values of f(v), v2 f(v) and v3 f(v). As a result, some approximate relationships were obtained for Γ (1+1/k), Γ (1+2/k) and Γ (1+3/k), that use some fitting polynomial functions. Very good agreements were found between the exact and the estimated values of Γ (1+n/k) that can be used for the estimation of the mean wind speed , the variance σ2 of the wind speed v;around the mean speed and the average wind power density.
基金This work was supported by Key-Area Research and Development Program of Guangdong Province(No.2019B 010132001)This work was also partially funded by Guangdong Basic and Applied Basic Research Foundation(2020A1515110891).
文摘In this review,the application of light ion irradiation is discussed for tailoring novel functional materials and for improving the performance in SiC or Si based electrical power devices.The deep traps and electronic disorder produced by light ion irradiation can modify the electrical,magnetic,and optical properties of films(e.g.,dilute ferromagnetic semiconductors and topological materials).Additionally,benefiting from the high reproducibility,precise manipulation of functional depth and density of defects,as well as the flexible patternability,the helium or proton ion irradiation has been successfully employed in improving the dynamic performance of SiC and Si based PiN diode power devices by reducing their majority carrier lifetime,although the static performance is sacrificed due to deep level traps.Such a trade-off has been regarded as the key point to compromise the static and dynamic performances of power devices.As a result,herein the light ion irradiation is highlighted in both exploring new physics and optimizing the performance in functional materials and electrical devices.
文摘For the characterization of the power function distribution, one needs any arbitrary non constant function only in place of independence of suitable function of order statistics, linear relation of conditional expectation, recurrence relations between expectations of function of order statistics, distributional properties of exponential distribution, record valves, lower record statistics, product of order statistics and Lorenz curve, etc. available in the literature. The goal of this research is not to give a different path-breaking approach for the characterization of power function distribution through the expectation of non constant function of random variable and provide a method to characterize the power function distribution as remark. Examples are given for the illustrative purpose.
文摘This paper presents the way to make expansion for the next form function: to the numerical series. The most widely used methods to solve this problem are Newtons Binomial Theorem and Fundamental Theorem of Calculus (that is, derivative and integral are inverse operators). The paper provides the other kind of solution, except above described theorems.
基金Supported by the Natural Science Foundation of China（10671155）
文摘For any positive integer n, the famous Smarandache power function SP（n） is defined as the smallest positive integer m such that n｜m^m, where m and n have the same prime divisors. The main purpose of this paper is using the elementary methods to study the positive integer solutions of an equation involving the Smarandache power function SP（n） and obtain some interesting results. At the same time, we give an open problem about the related equation.
文摘In practice,the control charts for monitoring of process mean are based on the normality assumption.But the performance of the control charts is seriously affected if the process of quality characteristics departs from normality.For such situations,we have modified the already existing control charts such as Shewhart control chart,exponentially weighted moving average(EWMA)control chart and hybrid exponentially weighted moving average(HEWMA)control chart by assuming that the distribution of underlying process follows Power function distribution(PFD).By considering the situation that the parameters of PFD are unknown,we estimate them by using three classical estimation methods,i.e.,percentile estimator(P.E),maximum likelihood estimator(MLE)and modified maximum likelihood estimator(MMLE).We construct Shewhart,EWMA and HEWMA control charts based on P.E,MLE and MMLE.We have compared all these control charts using Monte Carlo simulation studies and concluded that HEWMA control chart under MLE is more sensitive to detect an early shift in the shape parameter when the distribution of the underlying process follows power function distribution.
